curriculum vitae dr. suhaimi bin illias year 2018 ... · place of birth alor setar, kedah, malaysia...
TRANSCRIPT
CURRICULUM VITAE DR. SUHAIMI BIN ILLIAS YEAR 2018
1
CURRICULUM VITAE
DR. SUHAIMI BIN ILLIAS Present Position University Lecturer (Senior Lecturer)
School of Manufacturing Engineering
Address Universiti Malaysia Perlis (UniMAP)
Kampus Alam Pauh Putra, 02600 Arau, Perlis, Malaysia
Phone +049885035
Email [email protected], [email protected]
Date of Birth 11 August 1978
Place of Birth Alor Setar, Kedah, Malaysia
Marial Status Married to Natasha Binti Nordin, and blessed with one children
Suhaimi bin Illias was born on August 11, 1978 in Alor Setar, Kedah. He received his Bachelor Degree in
Mechanical Engineering from Ehime University, Japan in 2003. Then in 2007, he received his Master Degree in
Mechanical Engineering from Gunma University, Japan and the Doctor of Philosophy (PhD) in Mechanical
Engineering from Saga University, Japan in 2015. Dr. Suhaimi received full scholarship from the Malaysian
Government during all his studies in Japan. He has been working with the Mechanical Engineering Division,
School of Manufacturing Engineering, Universiti Malaysia Perlis (UniMAP) since 2003. He is currently working
as a Senior Lecturer. He is a member of the Heat Transfer Society of Japan (HTSJ), and the member of Board of
Engineers Malaysia (BEM), Malaysia. His current research interests include boiling heat transfer, droplet impact
on hot surface, phase change, thermo-fluid-physics and advanced cooling performance.
He has published about 46 publications, including proceedings and international journal. He has published 2
proceeding papers in the International Heat Transfer Conference, IHTC-13 (Sydney, Australia) and IHTC-15
(Kyoto, Japan). This International Conference is also known as Heat Transfer Olympic among heat transfer
researchers around the world. This conference is very prestigious and is highly respected by the heat transfer
society around the world. Currently, he also has published one journal article in SCIENTIFIC REPORTS entitled
“Micro-bubble emission boiling with the cavitation bubble blow pit” published by NPG (Nature Publishing
Group).
CURRICULUM VITAE DR. SUHAIMI BIN ILLIAS YEAR 2018
2
PERSONAL INFORMATION
1. NAME : DR. SUHAIMI BIN ILLIAS
2. UNIVERSITY : UNIVERSITY MALAYSIA PERLIS, MALAYSIA
3. STAF NO. : 0100610
CURRENT POSITION
1. Senior Lecturer : Gred DS52
ACADEMIC QUALIFICATIONS
March 2015 Saga University Japan Doctor of Philosophy (PhD) in Mechanical Engineering
March 2007 Gunma University Japan Master of Engineering in Mechanical Engineering
March 2003 Ehime University Japan Bachelor of Engineering in Mechanical Engineering
DISSERTATION
March 2015 Doctor of Philosophy (Ph. D) dissertation
Boiling transition phenomena beneath a sessile droplet on high temperature surface
March 2007 Master of Engineering dissertation
The effect of heating surface material on evaporation behavior of impinging droplet
March 2003 Bachelor of Engineering dissertation
Experimental studies of the beginning point of boiling
CGPA
Doctor of Philosophy 4.0
Master of Engineering 4.0
WORKING EXPERIENCE
1. March 2015 – till now
Senior Lecturer, Universiti Malaysia Perlis, Malaysia
School of Manufacturing Engineering (Mechanical Eng. Division)
Universiti Malaysia Perlis, MALAYSIA.
2. April 2007 – March 2015
Lecturer, Universiti Malaysia Perlis, Malaysia
School of Manufacturing Engineering (Mechanical Eng. Division)
Universiti Malaysia Perlis, MALAYSIA.
3. 15 May 2009 – 27 Februari 2011
Program Chairman
School of Manufacturing Engineering
Universiti Malaysia Perlis MALAYSIA
4. November 2003
Teaching Engineer, KUKUM November 2003
Kolej Universiti Kejuruteraan Utara Malaysia (KUKUM)
CURRICULUM VITAE DR. SUHAIMI BIN ILLIAS YEAR 2018
3
ADMINSTRATION POSITION
1. Program Chairman
Degree Manufacturing Engineering
School Of Manufacturing Engineering
Unversiti Malaysia Perlis, Malaysia
(May 2009 – Feb 2011)
2. Committee Members (Exco)
School Of Manufacturing Engineering
(May 2009 – Feb 2011)
EXPERTISE AND SPECIALISATION
1. Heat Transfer
2. Boiling Heat Transfer
3. Thermo-fluid-physics
4. Statics
5. Dynamics
PROFESIONAL MEMBERS
1. Member – Heat Transfer Society of Japan (HTSJ) – 3362
2. Member – Board of Engineer Malaysia (BEM) - 66171A
3. Member – The Institution of Engineers Malaysia (IEM) – 47634
EARLY EDUCATION
1. 1980-1985 Sekolah Rendah Kebangsaan Iskandar, Alor Setar, Kedah, Malaysia.
2. 1991-1993 Kolej Sultan Abdul Hamid, Alor Setar, Kedah, Malaysia.
3. 1994-1995 Maktab Rendah Sains Mara, Beseri, Perlis, Malaysia.
4. 1996-1997 Ambang Asuhan Jepun, Universiti Malaya, Kuala Lumpur, Malaysia.
CURRICULUM VITAE DR. SUHAIMI BIN ILLIAS YEAR 2018
4
RESEARCH GRANT
National
1. Short Term Grant UniMAP
Preliminary Study of Cement Mixture Using Waterfall Stone Powder and Construction Waste
Grant Number : 9001-000183
Joint Collaboration with Cement Industries Malaysia Sdn. Bhd. (CIMA)
Main Researcher : Suhaimi bin Illias
Amount : RM 10,000.00
2. Fundamental Research Grant Scheme (FRGS)
Fundamental Study of Fracture Mechanics Analysis of Multiple Edge Cracks Using
Multiple Sharp Cuts
Dr. Muhamad Saifuldin Abdul Manan, Dr.Haftirman, Mr. Suhaimi Illias, Mr. Ahmad
Syayuthi Abdul Rahman, Mr. Azmi Harun, Mr. Mohd. Nasir Mat Saad
Co-Researcher : Suhaimi bin Illias
Amount : RM 41,000.00
3. Anugerah Kecemerlangan SLAB/SLAI
Tabung Penyelidikan Jangka Pendek
Grant Number : 9009-000280
Main Researcher : Suhaimi bin Illias
Amount : RM 10,000.00
4. Fundamental Research Grant Scheme (FGRS)
FRGS 2015-1
Spray characteristics in multiple-fluid atomizer operating with palm based biofuels blend
Grant Number : 9003-00537
Dr. Mohamad Shaiful Ashrul Ishak, Prof. Dr. Nazry Jaafar, Dr. Abdul Haqi Bin Ibrahim,
Dr. Suhaila Hussain, Dr. Suhaimi Illias
Co-Researcher : Dr. Suhaimi bin Illias
Amount : RM 59,243.00
5. Fundamental Research Grant Scheme (FRGS)
FRGS 2015-1
Fundamental Study of Droplet Evaporation Process for Heat Transfer Optimization
Grant Number : 9003-00534
Dr. Suhaila Hussain, Dr. Mohamad Shaiful Ashrul Ishak, Dr. Suhaimi Illias, Kartini Alir,
Atikah Awang, Shafizan Shariffuddin
Co-Researcher : Dr. Suhaimi bin Illias
Amount : RM 61,305.00
6. Prototype Research Grant Scheme (PRGS)
PRGS 2016-1
Multiple Inlet Swirler Stabilized Burner Inside Gas Turbine For Biofuels Combustion
Dr. Mohamad Shaiful Ashrul Ishak, Prof. Dr. Nazry Jaafar, Dr. Suhaimi Illias, Dr. Suhaila Hussain
Co-Researcher : Dr. Suhaimi bin Illias
Amount : RM 121,000.00
CURRICULUM VITAE DR. SUHAIMI BIN ILLIAS YEAR 2018
5
7. Fundamental Research Grant Scheme (FRGS)
FRGS 2018-1
Nano Metal Oxide-Base Heterogeneous Catalysis Mechanism on Non-Edible Low Grade Feedstock
for Conversion to Kerosene Type Aviation Fuel
Dr. Mohamad Shaiful Ashrul Ishak, Dr. Suhaila Hussain, Dr. Nazri Omar, Dr. Suhaimi Illias
Co-Researcher : Dr. Suhaimi bin Illias
Amount : RM 82,000.00
8. Fundamental Research Grant Scheme (FRGS)
FRGS 2018-1
Thermal distribution mechanism at Critical Heat Flux (CHF) and Leidenfrost Temperature for Heat
Transfer Optimization.
Dr. Suhaimi Illias, Dr. Suhaila Hussain, Dr. Mohamad Shaiful Ashrul Ishak, Dr. Muhammad Asri
Idris, PM Dr. Mohd Hanafi Ani.
Researcher : Dr. Suhaimi bin Illias
Amount : RM 69,200.00
9. Fundamental Research Grant Scheme (FRGS)
FRGS 2018-1
Thermal properties at various volume concentration levels and heat transfer visualization of metal
oxide nanofluids using interferometric technique
En. Syamsul Syahrun, Dr. Suhaila Hussain, PM. Dr. Saifuldin Abdul Manan, Dr. Suhaimi Illias
Co-Researcher : Dr. Suhaimi bin Illias
Amount : RM 88,800.00
10. Public Private Research Network (PPRN)
PPRN 2018-1
Chicken bone cutter and cleaning machine for production of sate tulang ayam
Mohd Nazri Omar, Suhaimi Illias, Nor Zaiazmin Yahaya, Mohamad, Shaiful Ashrul Ishak, Ummi
Noor Nazahiah Abdullah, Kartini Hj. Alir
Co-Reseacher : Dr. Suhaimi bin Illias
Amount : RM 48,100.00
11. Public Private Research Network (PPRN)
PPRN 2018-1
Automatic soap mixing machine
Norashiken Othman, Mohamad Shaiful Ashrul Ishak, Mohd Nazri Omar, Suhaimi Illias, Ummi
Noor Nazahiah Abdullah, Kartini Hj. Alir
Co-Researcher : Dr. Suhaimi bin Illias
Amount : RM 48,100.00
CURRICULUM VITAE DR. SUHAIMI BIN ILLIAS YEAR 2018
6
Research Grant Amount
1. Short Term* RM 10,000.00
2. FRGS RM 41,000.00
3. Excellent Award* RM 10,000.00
4. FRGS 2015-1 RM 59,243.00
5. FRGS 2015-1 RM 61,305.00
6. PRGS 2016-1 RM 121,000.00
7. FRGS 2018-1 RM 82,000.00
8. FRGS 2018-1* RM 69,200.00
9. FRGS 2018-1 RM 88,800.00
10. PPRN 2018-1 RM 48,100.00
11. PPRN 2018-1 RM 48,100.00
TOTAL RM 638,200.00
INDUSTRIAL COLLABORATION
2015/2016 Cement Industries of Malaysia Berhad (CIMA)
(Mr. Mohd Rafizam Razali- Manager at Quality Control Department)
Final Year Project – completed
1. Kasthuri A/P Panichelvam (131050662)
2. Moi Chuan Sin (121121044)
2016/2017 Cement Industries of Malaysia Berhad (CIMA)
(Mr. Mohd Rafizam Razali-Manager at Quality Control Department)
Final Year Project – completed
1. Mohd Areeb Bin Anua (141050788)
2. Fatkhul Amin Bin Mohd Mokhlas (141050769)
2017/2018 Cement Industries of Malaysia Berhad (CIMA)
(Mr. Mohd Rafizam Razali- Manager at Quality Control Department)
Final Year Project – completed
1. Mohd Ikhram Bin Abdul Hamid (151050844)
CURRICULUM VITAE DR. SUHAIMI BIN ILLIAS YEAR 2018
7
EXHIBITION
National
1. Ekspo Rekacipta & Penyelidikan UniMAP 2008
Cement Mixture Using Waterfall Stone
Suhaimi ILLIAS, Mohamad Hatta Musa, Narzrezal Abdul Razak
Bronze Medal
2. Ekspo Rekacipta & Penyelidikan UniMAP 2009
Commercial Product From Sandstone
Suhaimi ILLIAS, Dr. Saifuldin Abdul Manan, Mohamad Hatta Musa, Narzrezal Abdul Razak
Bronze Medal
3. Ekspo Rekacipta & Penyelidikan UniMAP 2010
Low Cost Product From Rice Husk
Suhaimi ILLIAS, Mohamad Hatta Musa, Narzrezal Abdul Razak
Gold Medal
4. Ekspo Rekacipta & Penyelidikan UniMAP 2015
Portable Mucus Sucking Kit (Pomus Kit)
Dr. Suhaimi Illias, Dr. Shaiful Ashrul Ishak, Dr. Suhaila Hussain, Dr. Humaizi Hilmi, En. Jamali,
En. Hatta Musa, En. Narzrezal Abdul Razak
Gold Medal
5. Ekspo Rekacipta & Penyelidikan UniMAP 2016
Pulse Jet Air Dryer
Ir. Dr. Mohamad Shaiful Ashrul Ishak, Dr. Suhaimi Illias, Dr. Suhaila Hussain, Dr. Mohd.
Nazri Omar, Nor Zaiazmin Yahaya, Amirah Mohamad Sahar, Muhammad Roslan Rahim,
Suhelmi Senawi
Gold Medal
6. Ekspo Rekacipta & Penyelidikan UniMAP 2016
Pulse Jet Air Dryer
Ir. Dr. Mohamad Shaiful Ashrul Ishak, Dr. Suhaimi Illias, Dr. Suhaila Hussain, Dr. Mohd.
Nazri Omar, Nor Zaiazmin Yahaya, Amirah Mohamad Sahar, Muhammad Roslan Rahim,
Suhelmi Senawi
Best of the Best Award
7. EREKA Industry Network and Business Pitching UniMAP 2018
Portable Biomass Gasification For Electricity Generation
Ir. Dr. Mohamad Shaiful Ashrul Ishak, Ts. Dr. Mohd Nazri Omar, Ts. Dr. Nor Zaiazmin Yahaya,
Ts. Dr. Suhaimi Illias, Ts. Dr. Amizah Md Ariffen
Gold Medal
8. EREKA Industry Network and Business Pitching UniMAP 2018
Portable Biomass Gasification For Electricity Generation
Ir. Dr. Mohamad Shaiful Ashrul Ishak, Ts. Dr. Mohd Nazri Omar, Ts. Dr. Nor Zaiazmin Yahaya,
Ts. Dr. Suhaimi Illias, Ts. Dr. Amizah Md Ariffen
Best Category Award
9. EREKA Industry Network and Business Pitching UniMAP 2018
App-Based Greenhouse Agro in Urban Lifestyle
Ts. Kartini Alir, Ir. Dr. Mohamad Shaiful Ashrul Ishak, Ts. Dr. Mohd Nazri Omar,
Ts. Dr. Nor Zaiazmin Yahaya, Ts. Dr. Suhaimi Illias, Tc. Narzrezal Abdul Razak
Gold Medal
CURRICULUM VITAE DR. SUHAIMI BIN ILLIAS YEAR 2018
8
10. EREKA Industry Network and Business Pitching UniMAP 2018
Portable Mucus Sucking Kit II (Pomus Kit II)
Ts. Dr. Suhaimi Illias, Ir. Dr. Mohamad Shaiful Ashrul Ishak, Ts. Dr. Suhaila Hussain,
Ts. Dr. Muhammad Aiman Ahmad Fozi, Ts. Dr. Mohd Nazri Omar, Ts. Dr. Nor Zaiazmin Yahaya,
Ts. Kartini Alir, Tc. Narzrezal Abdul Razak
Silver Medal
11. EREKA Industry Network and Business Pitching UniMAP 2018
Cold Stirrer System
Ts. Dr. Mohd Nazri Omar, Ts. Dr. Nor Zaiazmin Yahaya, Ts. Dr. Suhaimi Illias, Ir. Dr. Mohamad
Shaiful Ashrul Ishak, Tc. Narzrezal Abdul Razak
Silver Medal
12. National Innovation and Invention Competition Through Exhibition, iCompEx’ 2018
Swirler Insert Reduces Emissions system (SIRES-STOVE)
Dr. Mohamad Shaiful Ashrul Ishak, Mohd Nazri Omar, Nor Zaiazmin Yahaya, Suhaimi Illias,
Muhamad Fahmi Mohd Roslan, Muhammad Nurhafiz Shaidan
Gold Medal
International
1. 20th
International Invention, Innovation & Technology Exhibition ITEX 2009,
Kuala Lumpur, MALAYSIA
Cement Mixture Using Waterfall Stone Powder
Suhaimi ILLIAS, Mohamad Hatta Musa, Narzrezal Abdul Razak
Bronze Medal
2. 21st International Invention, Innovation & Technology Exhibition ITEX 2010,
Kuala Lumpur, MALAYSIA
Commercial Product from Sandstone Powder
Suhaimi ILLIAS, Dr. Muhamad Saifuldin Abdul Manan, Mohamad Hatta Musa,
Narzrezal Abdul Razak
Silver Medal
3. 22nd
International Invention, Innovation & Technology Exhibition ITEX 2011,
Kuala Lumpur, MALAYSIA
Low Cost Product From Rice Husk
Suhaimi ILLIAS, Mohamad Hatta Musa, Narzrezal Abdul Razak
Silver Medal
4. International Eureka Innovation Exhibition – UniKL 2017
SIRES-Swirler Insert Reduces Emission System
Dr. Mohamad Shaiful Ashrul Ishak, Muhammad Roslan Rahim, Amirah Mohamad Sahar,
Muhamad Fahmi Mohd Roslan, Nor Zaiazmin Yahaya, Alaa Salahuddin Al-Saeedi, Dr. Suhaimi
Illias, Dr. Mohd Nazri Omar
Gold Medal
5. International Eureka Innovation Exhibition – UniKL 2018
App-Based Greenhouse Agro in Urban Lifestyle
Narzrezal Abdul Razak, Dr. Mohamad Shaiful Ashrul Ishak, Dr. Suhaimi Illias, Dr. Suhaila
Hussain, Dr. Nor Zaiazmin Yahaya, Dr. Mohd Nazri Omar
Gold Medal
6. International Eureka Innovation Exhibition – UniKL 2018
App-Based Greenhouse Agro in Urban Lifestyle
Mr. Narzrezal Abdul Razak, Dr. Mohamad Shaiful Ashrul Ishak, Dr. Suhaimi Illias, Dr. Suhaila
Hussain, Dr. Nor Zaiazmin Yahaya, Dr. Mohd Nazri Omar
Best Award Chapter A
CURRICULUM VITAE DR. SUHAIMI BIN ILLIAS YEAR 2018
9
NATIONAL / INTERNATIONAL / EXHIBITION / PANELS / JURY
2017
1. National and Innovation Competition through Exhibition iCompEx’17
Head of juries-Category F-Automotive, Transportation and Industrial Design
Polytechnic Sultan Abdul Halim Mua’dzam Shah, Jitra, Kedah (22-23 March 2017)
2. National and Innovation Competition through Exhibition iCompEx’17
Jury
Polytechnic Sultan Abdul Halim Mua’dzam Shah, Jitra, Kedah (22-23 March 2017)
2018
1. National and Innovation Competition through Exhibition iCompEx’18
Jury
Polytechnic Sultan Abdul Halim Mua’dzam Shah, Jitra, Kedah (20-23 March 2018)
2. Diploma Exhibition Technology & Engineering DEXTER 2018
Jury
Main Campus, School of Manufacturing, UniMAP (28 October 2018)
CURRICULUM VITAE DR. SUHAIMI BIN ILLIAS YEAR 2018
10
PUBLICATIONS
Article in Proceedings and Journals
2005
1. Generation of microbubble in the droplet collision boiling system.
Shigeaki Inada* , Kazuaki Shinagawa, Suhaimi Illias .
The 42th
National Heat Transfer Symposium, Sendai Japan 2005.
2006
2. The effect of heating surface material on the miniaturization boiling in the droplet collision
boiling system’.
Suhaimi Illias*, Shigeaki Inada, Hikaru Ono.
The 43th
National Heat Transfer Symposium, Nagoya , Japan 2006
3. Effects of wettability of heating surface materials on the miniaturization boiling in a droplet
collision boiling system.
Suhaimi Illias*, Shigeaki Inada.
International Symposium on Micro and Nano Technology, Taiwan 2006.
4. Mechanism elucidation for the miniaturization boiling phenomenon in droplet collision boiling
system.
S.Inada*, H. Sumiya, K.Shinagawa, S.Illias .
International Heat Transfer Conference, IHTC-13, Australia 2006.
2007
5. A Study of the dispersion Behavior of a droplet colliding with a heating surface.
Kazuaki SHINAGAWA*, Suhaimi ILLIAS, Hisanobu KAWASHIMA, Shigeru Uchiyama,
Yoshimitsu TAKAHASHI, Shigeaki INADA.
The 44th
National Heat Transfer Symposium, Nagasaki, Japan 2007.
6. Effects of Wettability of Heating Surface Materials on the Miniaturization Boiling and Film
Boiling in the Droplet Collision Boiling System.
Suhaimi Illias * , Hazry Desa and Wan Abdul Rahman
International Symposium on Advanced Technology MJISAT 2007, Kuala Lumpur.
7. Effects of Wettability and Materials Morphology on the Miniaturization Boiling.
S.Illias*, M.A.Idris, M.A.A.Halim, A.Mohamad.
Conference on Applications and Design in Mechanical Engineering CADME 2007, Perlis,
MALAYSIA
8. Development on multiobjective fuzzy optimization method in intelligent machinery application.
M.A.A.Halim*, A.H.Adom, A.Mohamad, S.Illias.
Conference on Applications and Design in Mechanical Engineering CADME 2007, Perlis.
2008
9. Effects of Wettability of Heating Surface Materials on the Film Boiling.
S.Illias*, M.A.Idris, W.A.Rahman, H. Azmi, M.A.A. Halim.
Malaysian Technical Universities Conferences on Engineering and Technology MUCET 2008,
Perlis.
10. Application of Wireless Power Transmission for Biomedical Implantable Organ H.Mansor
*, M.A.A.Halim, M.Y.Mashor, S.Illias.
Malaysian Technical Universities Conferences on Engineering and Technology MUCET 2008,
Perlis.
CURRICULUM VITAE DR. SUHAIMI BIN ILLIAS YEAR 2018
11
11. GD&T Applied on Engineering Drawing. H.Azmi
*, Z.Shayfull, K.Akmal, S.Illias.
Malaysian Technical Universities Conferences on Engineering and Technology MUCET 2008,
Perlis.
12. Elucidation of Miniaturization Boiling Mechanism in the Droplet Collision Boiling System
Shigeaki Inada*, Hisanobu Kawashima, Kazuaki Shinagawa, Suhaimi Illias, Manabu Nakagawasai,
Kohei Hayasaka
The Seventh JSME-KSME Thermal and Fluids Engineering Conference
13-16 October 2008, Sapporo, JAPAN.
2009
13. The Concept and Application of Miniaturization Boiling in Cooling System Suhaimi ILLIAS
* and Muhammad Asri IDRIS
International Nuclear Conference 2009 INC 09
29 June – 1 July 2009 PWTC, Kuala Lumpur, MALAYSIA
14. Visual Studies on Film Boiling
S.Illias*, M.A.Idris, M.S.Abdul Manan, H. Azmi, M.F.Ghazali
International Conference on Applications and Design in Mechanical Engineering, ICADME
11-13 Oktober 2009 Hotel Bayview, Penang, MALAYSIA
15. Study of non – Uniform Stress Distribution to Predict Stress Intensity Factors of Two Edge
Cracks
M.S.Abdul Manan*, S.Illias and K.A.Ismail
International Conference on Applications and Design in Mechanical Engineering, ICADME
11-13 Oktober 2009 Hotel Bayview, Penang, MALAYSIA
16. Modification of Weight Function Method to Predict Stress Intensity Factors of Two Cracks M.S.Abdul Manan
*, S.llias, M.F Ghazli
Malaysian Technical Universities Conference on Engineering and Technology, MUCET
June 20-22, 2009, MS Garden, Kuantan Pahang, MALAYSIA
17. Change-over Time Improvement through Single Minute Exchange of Die (SMED) Technique M.F.Ghazali
*, R. Muhammad, Z.Shayfull, S.Illias and R.Hamidon
International Conference on Advances in Mechanical Engineering, ICAME
24-25 June 2009, Shah Alam, MALAYSIA
18. Analyzing Benefits of 5S : A Process Sector Case Study M.F.Ghazali
*, R.Muhammad, Z.Shayfull, S.Illias
International Conference on Advances in Mechanical Engineering, ICAME
24-25 June 2009, Shah Alam, MALAYSIA
2010
19. Visual Studies Of A Droplet Dispersion Behavior On Material Heated Surface
S.Illias*, O.Inayatullah, M.S. Abdul Manan, M.F. Ghazali, M.A.Idris
Seminar Kebangsaan Aplikasi Sains dan Matematik, SKASM 2010
8-10 Dis 2010, Johor Bahru, MALAYSIA
20. Analisis Isyarat Pancaran Akustik Dalam Pemantauan Kelikatan Minyak Enjin : Nilai Purata
Amplitud (NPA)
O. Inayatullah*, S.Illias, M. S. A. Manan, N. Jamaludin, M.J.M.Nor, F. Mat
Seminar Kebangsaan Aplikasi Sains dan Matematik, SKASM 2010
8-10 Dis 2010, Johor Bahru, Malaysia.
CURRICULUM VITAE DR. SUHAIMI BIN ILLIAS YEAR 2018
12
2011
21. The Concept and Application of Miniaturization Boiling In Reactor Cooling System
S.Illias*, M.A.Idris, M.Z.M. Zain
International Review of Mechanical Engineering (IREME) : May Edition
[International Journal : Indexed in Scopus]
22. Experimental Studies of Film Boiling Phenomena on Carbon Heated Surface
S.Illias*, M.A.Idris, M.Z.M. Zain
International Review of Mechanical Engineering (IREME) : July Edition
[International Journal : Indexed in Scopus]
2012
23. Measurement of Surface Temperature and Surface Heat Flux During Impact of a Droplet on
Hot Surface
Y. Mitsutake*, S. Illias, A.K. Mozumder, M.Monde
The 49th
National Heat Transfer Symposium, Toyama , Japan 2012
24. Improvement of corrosion resistence of Rare Earth Element (REE) Based Anodic
Oxidation Coating on AZ91D Magnesium Alloy
M.Z.M. Zain*, S. Illias, M. Mat Salleh, K.A Ismail, Z. Nooraizedfiza
Applied Mechanics and Materials Vol. 187 (2012) pp 210-214
25. Measurement and Observation of Transient Boiling Phenomena During Sudden Contact of
Ethanol Droplet with Hot Surface
Y. Mitsutake*, S. Illias, A.K. Mozumder, M. Monde
Proceeding of 4th Asian Joint Workshop on Thermophysics and Fluid Science, October 14-17,
2012, Busan, Korea.
2013
26. Visual Studies and Measurement of Surface Temperature and Surface Heat Flux During
Impact of a Droplet on Hot Surface
S. Illias*, K. Kenryu, N. Ryosuke, Y. Mitsutake, M. Monde
The 50th
National Heat Transfer Symposium, Sendai , Japan 2013
27. Effect of heat treatment on microstructure and corrosion behavior of Az91d magnesium aloi
T. C. Lih*, M.Z.M. Zain, S. Norbahiyah, K.A. Ismail, M.N.B. Derman, S. Illias
Advanced Material Research Vol. 685 (2013) , pp. 102-106.
2014
28. Experimental Study of generation time of stable vapor film during impact of a single and
multiple droplet on hot surface
S. Illias*, Y. Kojima, N. Koto, S. Fukushima, Y. Yamashita, Y. Mitsutake, M. Monde
The 51st National Heat Transfer Symposium, Hamamatsu , Japan 2014
29. Generation Time of Stable Vapor Film during Impact of a Droplet on Hot Surface S. Illias
*, M. N. Hasan, Y. Mitsutake, M. Monde
Thermal Science and Engineering, Vol. 22, No. 2(2014), pp. 21.
30. High Speed Observation and Measurement of Surface Tempearture and Surface Heat Flux
During Impact of a Droplet on Hot Surface
S. Illias*, M. N. Hasan, Y. Mitsutake, M. Monde
International Heat Transfer Conference, IHTC-15, Kyoto, 2014.
CURRICULUM VITAE DR. SUHAIMI BIN ILLIAS YEAR 2018
13
31. Homogeneous Boiling Explosion Condition : From an Energy Point of View
M. N. Hasan*, A. Hasan, S. Illias, Y. Mitsutake, M. Monde
International Conference on Mechanical Engineering 2013, (ICME2013) 20-21 June, Dhaka,
Bangladesh
32. Characteristics of Homogeneous Nucleation Boiling in Ethanol during Rapid Linear
Boundary Heating
M. N. Hasan*, A. Hasan, S. Illias, Y. Mitsutake, M. Monde
International Conference on Mechanical Engineering 2013, (ICME2013) 20-21 June, Dhaka,
Bangladesh
33. Measurement and observation of elementary transition boiling process after sudden contact of
liquid with hot surface
Y. Mitsutake, S. Illias, K. Tsubaki, M.N. Hasan, M. Monde
6th BSME International Conference on Thermal Engineering (ICTE 2014), 19-21 December 2014,
Dhaka, Bangladesh.
34. Homogeneous Boiling Explosion Condition : From an Energy Point of View
M. N. Hasan*, A. Hasan, S. Illias, Y. Mitsutake, M. Monde
Procedia Engineering 90 (2014) 618-623.
35. Characteristics of Homogeneous Nucleation Boiling in Ethanol during Rapid Linear
Boundary Heating
M. N. Hasan*, A. Hasan, S. Illias, Y. Mitsutake, M. Monde
Procedia Engineering 90 (2014) 624-630.
36. Experimental Investigation of Stable Vapor Film Generation Time and Wetting Temperature
Shift during Impact of a Droplet with Hot Surface
Suhaimi Illias, Shinpei Fukushima, Hisayoshi Soejima, Yuichi Mitsutake, Masanori Monde
Proceedings of 5th Asian Joint Workshop on Thermophysics and Fluid Science
September 23-26, 2014, Nagasaki, Japan.
2015
37. Measurement and observation of elementary transition boiling process after sudden contact of
liquid with hot surface
Y. Mitsutake*, S. Illias, K. Tsubaki, M.N. Hasan, M. Monde
Procedia Engineering, Vol 105, pp. 5-21 (2015).
38. Characteristics of transient heat transfer and wetting phenomena during laminar jet quenching
on rotating cylinder
Shinya Tsuboyama*, Tomofumi Higashi, Yuichi Mitsutake, Suhaimi Illias, Aloke Kumar Mozumder,
Koutarou Tsubaki, Masanori Monde
Procedia Engineering, Vol 105, pp. 787-797 (2015).
39. Application of the spray quenching to T6 heat treatment of thick A6061 hollow cylinders Hisayoshi Soejima
*, Yuichi Mitsutake, Suhaimi Illias, Koutarou Tsubaki, Masanori Monde
Procedia Engineering, Vol 105, pp. 776-786 (2015).
2016
40. Micro-bubble emission boiling with the cavitation bubble blow pit
Shigeaki Inada*, Kazuaki Shinagawa, Suhaimi Bin Illias, Hiroyuki Sumiya, Helmisyah A. Jalaludin
Scientific Reports 6, 33454.
41. Performance of Palm Oil-Diesel Blending inside Liquid Spray Burner
M. S. A. Ishak*, S. Illias, M. N. M. Jaafar
International Journal of Applied Engineering Research 11 (8), 6003-6006.
CURRICULUM VITAE DR. SUHAIMI BIN ILLIAS YEAR 2018
14
42. High speed visualization and analysis of maximum spreading of water droplet during impact
on hot horizontal surface
S. Illias*, M. S. A. Ishak, S. Hussain, K. A. Ismail
International Journal of Applied Engineering Research, Vol. 11 (22) pp. 10382-10387.
2017
43. Visual study of droplet bouncing phenomena upon impact on hot horizontal surface
S. Illias, S. Hussain, M. S. A. Ishak, M. Z. M. Zain and M. A. Idris
International Journal of Applied Engineering Research, Vol. 12 (7) pp. 1305-1310.
2018
44. On the equations solved for droplet evaporation simulation S. Hussain and S. Illias
International Journal of Applied Engineering Research, Vol. 13 (6) pp. 3182-3186, 2018.
45. Effect of CuO doped TiO2 on morphology, crystal structure and photocatalytic activity
M. A. Idris, K. Kamarudin, N. F. M. Yunos, B. Johari, S. Illias
International Journal of Current Science, Engineering and Technology
46. Stefan Tube Evaporation: Numerical Model Validation for Diffusion-Controlled
Evaporation Process
S. Hussain, Y. Takata, S. Illias
International Review of Mechanical Engineering (IREME), Vol 12 (7) 620-626, 2018.
CURRICULUM VITAE DR. SUHAIMI BIN ILLIAS YEAR 2018
15
SUBJECT TAUGHT
Academic Session 2007/2008 First Semester EPT 101 Engineering Mechanics
Second Semester EPT 101 Engineering Mechanics
Academic Session 2008/2009 First Semester EPT 101 Engineering Mechanics
Second Semester EPT 101 Engineering Mechanics
Academic Session 2009/2010 First Semester EPT 101 Engineering Mechanics
Second Semester EPT 101 Engineering Mechanics
Academic Session 2010/2011 First Semester EPT 101 Engineering Mechanics
Second Semester EBT 131 Engineering Mechanics
Academic Session 2011/2012 First Semester EPT 212 Dynamics
Second Semester Further studies (PhD)
Academic Session 2012/2013 First Semester Further studies (PhD)
Second Semester Further studies (PhD)
Academic Session 2013/2014 First Semester Further studies (PhD)
Second Semester Further studies (PhD)
Academic Session 2014/2015 First Semester Further studies (PhD)
Second Semester EPT 324 Heat Transfer
Academic Session 2015/2016 First Semester EPT 212 Dynamics
Second Semester EPT 324 Heat Transfer
Academic Session 2016/2017 First Semester EPT 212 Dynamics
Second Semester EPT 324 Heat Transfer
Academic Session 2017/2018 First Semester EPT 212 Dynamics
Second Semester EPT 324 Heat Transfer
Academic Session 2018/2019 First Semester EPT 212 Dynamics
Second Semester EPT 324 Heat Transfer
CURRICULUM VITAE DR. SUHAIMI BIN ILLIAS YEAR 2018
16
Final Year Project (FYP): SUPERVISION
Undergraduate
FYP 2007/2008
1. NABIL FIKRI BIN ABD AZIZ (041050435)
Status: Completed
2. TUAN KHAIRUL AFZAN BIN TUAN MUHD SUKELI (041050650)
Status: Completed
FYP 2008/2009
3. MUHAMMAD FARHAN BIN MUHAMMAD TOHA (051050454)
Status: Completed
4. AHMAD HAFIFE BIN HAMZAH (051050034)
Status: Completed
5. MAZILA BINTI MAMAT (051050261)
Status: Completed
6. NORULHAMKHA BINTI ABDUL BASIR (051050554)
Status: Completed
7. NORSUHAILA BINTI ZAKARIA (051120553)
Status: Completed
FYP 2009/2010
8. CHUNG LEE PING (061050136)
Status: Completed
9. MOHD HALIM BIN TUKIMIN (071050475)
Status: Completed
10. MUHAMAD AIMAN BIN ABOL HASSAN (071050541)
Status: Completed
11. MOHD HAFIZ BIN RODZI (071050470)
Status: Completed
FYP 2010/2011
12. FONG AI PENG (071050175)
Status: Completed
13. KOW PHEI YING (071050284)
Status: Completed
14. ANG ENG TATT (071050064)
Status: Completed
15. TAI JIN CHANG (071050969)
Status: Completed
CURRICULUM VITAE DR. SUHAIMI BIN ILLIAS YEAR 2018
17
FYP 2011/2012
Study Leave-PhD
FYP 2012/2013
Study Leave-PhD
FYP 2013/2014
Study Leave-PhD
FYP 2014/2015
Study Leave-PhD
FYP 2015/2016
16. KASTHURI A/P P PANICHELVAM (131050662)
Status: Completed
17. MOI CHUAN SIN (121121044)
Status: Completed
18. GOH WAN GIN (121122631)
Status: Completed
19. MARDHIAH BINTI ABDUL WAHAB (121120740)
Status: Completed
20. TEEVAGAR GABRIALNAYAGAM (131052716)
Status: Completed
21. AZRA IDZKANDAR BIN ABU ZAHAR (121050215)
Status: Completed
FYP 2016/2017
22. FATKHUL AMIN BIN MOHD MOKHLAS (141050769)
Status: Completed
23. MOHD AREEB BIN ANUA (141050788)
Status: Completed
24. HEMALA A/P N JEYAPRAKS (131050581)
Status: Completed
FYP 2017/2018
25. NOR ATIKA BINTI ROSMAN (141121588)
Status: Completed
26. NOOR SHAHIDA BINTI ABDULLAH (141121586)
Status: Completed
27. MOHD IKHRAM BIN ABDUL HAMID (151050844)
Status: Completed