RANGER FLANGE ADAPTORS FLANGE ADAPTORS - ... bs 4504: 10/3, 16/3. ... flange adaptor length b mm table flange thickness mm approx. ... stepped flange adaptors flanges drilled pn10 or pn16, ...

Download RANGER FLANGE ADAPTORS FLANGE ADAPTORS -  ... bs 4504: 10/3, 16/3. ... flange adaptor length b mm table flange thickness mm approx. ... stepped flange adaptors flanges drilled pn10 or pn16, ...

Post on 23-May-2018

215 views

Category:

Documents

2 download

TRANSCRIPT

  • FLA

    NG

    E A

    DA

    PTO

    RS

    FLA

    NG

    E A

    DA

    PTO

    RS

    RA

    NG

    ER

    RA

    NG

    ER

    FLA

    NG

    E A

    DA

    PTO

    RS

    FLA

    NG

    E A

    DA

    PTO

    RS

    RA

    NG

    ER

    RA

    NG

    ER

    RANGER FLANGE ADAPTORS

    RANGER products, in the form of wide range couplings and flange adaptors, are designed to join pipes of various outside diameters with the same or different nominal bore.

    Because of the wide range tolerance on O.D. (Up to 23mm) a single RANGER coupling can connect steel, ductile iron, UPVC, cast iron, asbestos cement and other rigid pipe materials.

    RANGER Flange adaptors facilitate the connection of plain ended pipe to flanged ancilliary products , in the same range of outside diameters, and multi drilling flanges further simplify installation.

    The ability of RANGER couplings to join dissimilar pipe materials is a bonus feature in both repair or permanent situations.

    Corrosion protection for RANGER products is avail-able in Fusion Bonded Epoxy, Red Oxide Primer and Galvanised finish as standard. Optional coatings to customer specifications are available on request.

    RANGER products have application in the reticulation of potable water, waste water and sewage as well as in the marine, mining, oil, gas and general engineering sectors.

    Because of the RANGERS wide range tolerance on pipe O.D., on site guesswork is eliminated and stock range holdings are optimised.

    Moulded, circumferentially ribbed or specially profiled gaskets, generally in EPDM or NBR materi-als, provide for smooth installation by minimising contact friction.

    RANGER gaskets are designed to provide a leak tight seal across the O.D. range per nominal size and still allow for thermal expansion and contraction of the pipe up to 5mm per gasket, facilitated through gasket defor-mation.

    To facilitate installation and avoid possible creep under rising load, it is strongly recom-mended that the RANGER rubber sealing gaskets are well lubricated with a suitable non toxic soap solution before the intro-duction of the pipe. This practice should obviate the need for re tightening the fasten-ers after pressure testing, and further facili-tate the seating of the joint components.

  • 50mm: BS 10 Table D,E, & F: ANSI 150: BS4504: 6/3, 10/3, 16/3.SABS 1123: 600/3, 1000/3, 1600/3

    80mm: BS 10 Table D,E, & F: ANSI 150: BS4504: 6/3, 10/3, 16/3.SABS 1123: 600/3, 1000/3, 1600/3

    100mm: BS 10 Table D,E, & F: ANSI 150: BS4504:10/3, 16/3.SABS 1123: 1000/3, 1600/3

    125mm: BS 10 Table D,E, & F: ANSI 150: BS4504: 6/3, 10/3, 16/3.SABS 1123: 600/3, 1000/3, 1600/3.

    150mm: BS 10 Table D & E: ANSI 150: BS4504: 10/3, 16/3.SABS 1123: 1000/3, 1600/3.

    200mm: BS 10 Table D & E: ANSI 150: BS4504: 10/3, 16/3.SABS 1123: 1000/3, 1600/3.

    175mm: BS 4504: 10/3, 16/3. SABS 1123: 1000/3, 1600/3.

    250mm: BS 1123: 1000/3, BS 10 Table E: BS4504: 10/3, 16/3. SA 1600/3.

    59-72 mm50mm/2

    65/80mm: BS 10 Table F: BS4504:10/3, 16/3: SABS 1123:1000/3, 1600/372-85 mm65mm/2.5

    88-103 mm80mm/3

    109-128 mm100mm/4

    NOM. BORE PIPE O.D. RANGE FLANGE DRILLING COMPATIBILITY

    MAX WORKING PRESSURE: 16 BAR SETTING GAP: 19mmTOLERANCE ON ANGULAR DEFLECTION: 3 DEGREESEXPANSION AND CONTRACTION RANGE: 0-5 mmRECOMMENDED BOLT TORQUE: 60-80 Nm

    138-153 mm125mm/5

    159-182mm150mm/6

    192-210 mm175mm/7

    218-235 mm200mm/8

    250-267 mm250mm/10

    To customer specifications

    272-289 mm

    315-332 mm300mm/12

    PN 6, PN 10, PN 16, TABLE D, TABLE E, ANSI 150 lb322-340mm300mm/12

    PN 10, PN 16374-391 mm350mm/14

    PN 6, PN 10, PN 16

    PN 10,PN 16

    417-437 mm400mm/16

    480-500 mm450mm/18

    PN 10, PN 16, ANSI 150 lb

    PN 10, PN 16, ANSI 150 lb

    526-546 mm

    630-650 mm

    500mm/20

    600mm/24

    RANGER FLANGE ADAPTOR

    RANGER PRODUCTS COMPLY WITH AWWA: C219, BS 534 : 1990,BS 4772 : 1998 AND SABS 1808-2 :1998:

    ADAPTOR BODY:

    PIPE MATERIAL SUITABILITY IS AS PER THE TABLE ON PAGE 2

    EPDM to: BS EN681-1:1990 BS 6920 Approved

  • DEDICATED FLANGE ADAPTORS

    KLAMFLEX Dedicated Flange Adaptors are manufactured to join plain-ended pipe to flanged valves, fittings and pipes, obviating difficulties usually experienced with rigid connections.When ordering KLAMFLEX Dedicated Flange Adaptors the following information is required to avoid the possibility of error in flange selections:

    Pipe outside diameter.Nominal bore of the flanged fitting.Table drilling with standard applicable.

    FLA

    NG

    E A

    DA

    PTO

    RS

    FLA

    NG

    E A

    DA

    PTO

    RS

    DED

    ICAT

    ED

    DED

    ICAT

    ED

  • FLANGE ADAPTORS : STEEL PIPESFLANGES DRILLED PN10 OR PN16, 1000/3 OR 1600/3 (BS10: A,D,E)

    AND ANSI 125/ 150

    60.376.188.9

    114.3139.7165.1168.3

    219.1267273

    323.9

    355.6406.4

    457508610711813914

    1016

    1219142016201820

    20202032

    +0.8+0.8+0.8+0.8+1.6+1.6+1.6

    +1.6+1.6+1.6+1.6

    +1.6+1.6+1.6+1.6+1.6+1.6+1.6+1.6+1.6

    +1.6+1.6

    +3+3

    33

    -0.8-0.8-0.8-0.8-0.8-0.8-0.8

    -0.8-0.8-0.8-0.8

    -1.6-1.6-1.6-1.6-1.6-1.6-1.6-1.6-1.6

    -1.6-3-3-3

    -3-3

    134150165191220246246

    308360364414

    458509559610712813915

    10161118

    1335153617361936

    21342146

    100100100100100100100

    100100100100

    150150150150150150150150150

    150150150150

    150/ 300150/ 300

    152102102102104106106

    106109109109

    153154154155155155155155157

    165175190190

    190/ 290190/ 290

    12121212141616

    16191919

    232424252525252527

    35456060

    6060

    3.13.43.94.56.57.57.5

    1015.514.617.3

    33.539.645.555.670.671.684.490.1

    118.6

    198275.9439.1494.1

    TBATBA

    PIPEOD

    mm

    NOMBORE

    TOLERANCEON PIPE OD

    FOR DISTANCE L

    mm

    OD OFENDRING

    A

    mm

    FLANGEADAPTORLENGTH

    B

    mm

    TABLEFLANGE

    THICKNESS

    mm

    APPROX.MASS

    kg

    MINIMUMLENGTH

    PREPAREDPIPE END

    L

    mm

    FOR FLANGE ADAPTORS OF PN25 AND PN40 WORKING PRESSURE AND LARGER PIPE DIAMETER.PLEASE CONTACT KLAMFLEX

    The above table includes samples of the sizes available, please contact us for any other sizes up to 3500mm.Pipe Couplings also manufacture Straight Couplings, stepped couplings and junior couplings.We reserve the right to change dimensions without further notice.

    506580

    100125150150

    200250250300

    350400450500600700800900

    1000

    1200140016001800

    20002000

    mm

    X

  • FLANGE ADAPTORS: DUCTILE IRON PIPESFLANGES DRILLED PN10 OR PN16, 1000/3 OR 1600/3 (BS10: A,D,E)

    AND ANSI 125/ 150

    118170

    222274326

    378429480532635738842945

    1048

    125514621668

    18752082

    +1.0+1.0

    +1.0+1.0+1.0

    +1.0+1.0+1.0+1.0+1.0+1.0+1.0+1.0+1.0

    +1.0+1.0+1.0

    +1.0+1.0

    -3.0-3.0

    -3.5-3.5-3.5

    -3.5-4.0-4.0-4.0-4.5-4.5-4.5-5.0-5.0

    -6.0-6.0-6.0

    -6.0-6.0

    200260

    308364414

    480531582634737840944

    10471150

    137115781784

    19892196

    100100

    100100100

    150150150150150150150150150

    150150150

    150150/300

    102106

    106109109

    153154154155155155155155157

    165175190

    190190/290

    1216

    161919

    232424252525252527

    354560

    6060

    4.57.8

    9.814.717.1

    3237.542.952.566.566.577.982.1

    108.7

    180.3244.1382.7

    TBATBA

    100150

    200250300

    350400450500600700800900

    1000

    120014001600

    18002000

    PIPEOD

    mm

    NOMBORE

    mm

    TOLERANCEON PIPE OD

    FOR DISTANCE L

    mm

    OD OFENDRING

    A

    mm

    FLANGEADAPTORLENGTH

    B

    mm

    TABLEFLANGE

    THICKNESS

    mm

    APPROX.MASS

    kg

    MINIMUMLENGTH

    PREPAREDPIPE END

    L

    mm

    FOR FLANGE ADAPTORS OF PN25 AND PN40 WORKING PRESSURE PLEASE CONTACT KLAMFLEX

    Flange adaptors up to 324mm ODM12 studs 6580 Nm

    Flange adaptors over 324mm ODM16 studs 80120 Nm.

    KLAMFLEX Stepped Flange Adaptors are also available to accommodate large changes in pipe outside diameter.

    GAP X18mm for sizes up to and including 324mm OD32mm for sizes over 324mm OD.

    MAXIMUM GAP X25mm for sizes over 60mm OD and up to and including 324mm OD.45mm for sizes over 324mm OD.THE MAXIMIUM DIMENSIONS ABOVE MUST NOT BE EXCEEDED UNDER ANY CIRCUMSTANCES

    RECOMMENDED SETTING GAPS

    DEDICATED FLANGE ADAPTORS

    TIGHTENING TORQUES AND STUD NUTS

  • Flange adaptors up to 324mm ODM12 studs 6580 Nm

    Flange adaptors over 324mm ODM16 studs 80120 Nm.

    KLAMFLEX Stepped Flange Adaptors are also available to accommodate large changes in pipe outside diameter.

    GAP X18mm for sizes up to and including 324mm OD32mm for sizes over 324mm OD.

    MAXIMUM GAP X25mm for sizes over 60mm OD and up to and including 324mm OD.45mm for sizes over 324mm OD.THE MAXIMIUM DIMENSIONS ABOVE MUST NOT BE EXCEEDED UNDER ANY CIRCUMSTANCES

    The above table includes samples of the sizes available, please contact us for any other sizes up to 3500mm.Pipe Couplings also manufacture Straight Couplings, stepped couplings and junior couplings.We reserve the right to change dimensions without further notice.

    RECOMMENDED SETTING GAPS

    STEPPED FLANGE ADAPTORS

    TIGHTENING TORQUES AND STUD NUTS

    STEPPED FLANGE ADAPTORSFLANGES DRILLED PN10 OR PN16, 1000/3 OR 1600/3 (BS10: A,D,E)

    AND ANSI 125/ 150

    FOR FLANGE ADAPTORS OF PN25 AND PN40 WORKING PRESSURE AND LARGER PIPE DIAMETER.PLEASE CONTACT KLAMFLEX

    318345667755

    1188

    +0.6 -0.0+0.6 -0.0+1.0 -0.0+1.0 -0.0+1.2 -0.0

    100100150150150

    405447769857

    1304

    182261254254256

    1919252527

    2437

    108119191

    250300600700

    1000

    PIPEOD

    mm

    NOMBORE

    mm

    TOLERANCEON PIPE OD

    FOR DISTANCE Lmm

    A

    mm

    B

    mm

    TABLEFLANGE

    THICKNESSmm

    APPROXMASS

    kg

    LMIN

    mm

    Klamflex Range Flange AdaptorsKlamflex Flange Adaptors

Recommended

View more >