qualification statement

Qualification Qualification StatementStatement

DAEJOO ENT Co.,LtdDAEJOO ENT Co.,Ltd DAEJOO Energy & Technology대주 ·KC Group

Contents

PART I

Qualification Qualification StatementStatement

PART II

Company ProfileCompany Profile

Introduction of Company

Financial Statement

History

Organization chart

PART III

Location

Certificates &Certificates &LicensesLicenses

Registration of business

ISO Certificate

Patent

Member of Trading Association

PART IVEquipment &Equipment &TechnologistTechnologist

Equipment retention present condition

Reg. of expertise construction business

Technologist retention present condition

PART V

The Result of Building in Major The Result of Building in Major ConstructionConstruction

Business Field

Qualification Statement

APPLICATIONFOR NOMINATION CONSTRUCTION WORK

We submit to you this application with all

documents related to the matter in order to be nominated

for the construction work which you placed to another.

It gives us a great pleasure if you nominate our company.

Thank you for your trouble in advance.

Date of issue :

Applicant : Choi, Dong Kyu DAEJOO E&T Co.,

Ltd.

Company Profile

We are a leading Pre-Insulated Pipe (PIP) producer in Korea with yearly production capacity more than one million of straight type pipes and two thousand of other shape of pipes manufacturing equipment located at Gong-Ju, Chung-Nam Province. Our factory plant encompasses over 5,000 sqm on 25,000 sqm

Since its establishment in 1989, we are producing not only Pre-Insulated Pipe for heating & air conditioned as a main business forces items but also PIP for waterworks & refrigerant etc.. Especially, we have delivered the Steel In Steel Pipe (SIS) for underground-laying to KEPCO “Heating Pipe Works at Daejeon 3,4 industrial Area” in advance of others through a technical corporation with German partner.

After supply our products to KDHC, KEPCO, IIAC, Seoul Energy Co. Ltd., Osan Energy Co. Ltd. and POSCO etc., we were acknowledged our quality from them. Furthermore, we built-up a total service network to cover the design, producing, installation and test-run of PIP as well as our durable Research and Development for improving its quality. In other to support its organization, we acquired KSA 9001/ISO 9001 Certification for PIP quality system in July 2000, and in October GQ Certification from Small & Medium Business Administration as a Good Quality company. After all, in December our products of PIP were selected to an excellent products from Public Procurement Service and it has been registered on government’s procurement officially as a professional PIP manufacturer in Korea, firmly.

Introduction of Company

Company Profile

Overview

Name of Company :

DAEJOO E&T Co. Ltd.

CEO : Choi, Dong Kyu

Employee : 77

Establishment : 1989. 06.

Office Location : 13F Shinwha Building, 34-1 Mapo-dong Mapo-gu, Seoul, Korea

HQ Location : 47-16 Dowha-dong Nam-gu, Incheon, Korea

Factory Location : 725-1 Gumsang-dong Chungcheonnam-do, Gongju-si, Korea

#5 Ba 625 Shiwha Industrial Complex, Seonggok-dong, Ansan-si, Gyeonggi-do, Korea

Scale of Factory : Gongju – Land : 7,540 , B/D : 1,500

Shiwha – Land : 11,604 , B/D : 5,584 Capacity of Factory

: Gongju – PIP : 19,000 Ton/Yr - SIS : 21,000 Ton/Yr

Shiwha – Elevator Guide Rail : 7,000 Ton/Yr

Homepage : www.daejooent.co.kr

Tel : +82-2-540-0400

Fax : +82-2-540-0401

Company Profile

Financial Statement(Unit: Korean Won)

DAEJOO E&T CorporationBALANCE SHEETS

AS OF DECEMBER 31st 2007, 2006 AND 2005

Korean WonASSETS 2,007 2,006 2,005

CURRENT ASSETSCash and cash equivalents 54,067,964 357,267,844 741,994,671 Short-term financial instrument 1,150,000,000 1,258,000,000 1,619,000,000 Marketable securities 2,500,000 570,000 120,000 Accounts receivable-other 5,814,873,627 6,355,782,313 2,572,658,430 Bad debt reserve (393,710,312) (159,077,924) (41,090,207)Short-term loans 146,641,736 80,858,640 42,827,050 Bad debt reserve (108,508,850) (17,170,400) (10,000,000)Other accounting receivable 74,402,944 75,485,162 57,023,246 Bad debt reserve (20,087,409) (15,400,000) (15,400,000)Accrued income 20,062,083 10,314,599 75,566,141 Advanced payments 519,560,214 428,777,828 302,173,392 Prepaid expenses 130,547,535 51,041,450 58,461,231 Current deferred income tax Assets 130,339,077 32,255,842 - Inventories 4,905,164,844 2,382,983,503 1,932,023,346

TOTAL CURRENT ASSETS 12,425,853,453 　 10,841,688,857 　 7,335,357,300

NON-CURRENT ASSETSLong-term financial instrument 635,500,000 155,500,000 62,000,000 Investment securities 395,826,222 356,942,000 901,512,000 Equity investment securities 3,183,430,423 3,085,460,005 1,800,000,002 Long-term loans 20,000,000 20,000,000 20,000,000 Deposit received 98,952,000 98,952,000 98,952,000 Membership 183,960,000 183,960,000 - Long-term Prepaid expenses 55,766,492 - - Property and equipments, net 1,598,339,657 1,711,947,184 1,583,825,678

TOTAL NON-CURRENT ASSETS 6,171,774,794 　 5,612,761,189 　 4,466,289,680

TOTAL ASSETS 18,597,628,247 　 16,454,450,046 　 11,801,646,980

DAEJOO E&T CorporationBALANCE SHEETS

AS OF DECEMBER 31.2007, 2006 AND 2005

Korean Won2,007 2,006 2,005

LIABILITIES AND STOCKHOLDERS' EQUITY

CURRENT LIABILITIES

Accounts and note payable-trade 5,386,911,889 5,636,437,836 2,832,947,01

9

Short- term borrowings 3,140,000,000 2,300,000,000 2,644,016,00

0

Accounts payable-other 521,655,736 435,679,399 269,846,842 Advances received from customers 435,779,476 500,498,305 833,684,690

Withholdings 25,301,650 13,304,706 8,744,349

Accrued expence 269,361,086 235,097,767 185,249,697

Accrued corporation tax 496,128,386 343,744,794 398,659,425

Current deferred income tax credits - - 9,325,870

TOTAL CURRENT LIABILITIES10,275,138,22

3 　9,464,762,807 　7,182,473,89

2

LONG-TERM LIABILITIES

Leasehold Deposits Recevied

- 5,000,000 - Accrued severabce and retirement benefits,net 268,353,688 321,048,681 261,805,589 Deferred income tax credits 397,438,350 453,862,094 197,107,355

TOTAL LONG-TERM LIABILITIES 665,792,038 　 779,910,775 　 458,912,944

TOTAL LIABILITIES

10,940,930,261 　

10,244,673,582 　

7,641,386,836

STOCKHOLDERS' EQUITY

Capital stock 1,734,750,000 1,734,750,000 1,734,750,00

0

Other capital surplus

Deficit 6,214,931,771 4,887,804,269 2,743,567,26

5 Capital adjustment accounts

Valuation gains(loses) on equity investment securities (292,983,785) (412,777,805)

(318,057,121)

TOTAL STOCKHOLDERS'EQUITY 7,656,697,986 　6,209,776,464 　4,160,260,14

4

TOTAL LIABILITIES AND STOCKHOLDERS' EQUITY

18,597,628,247 　

16,454,450,046 　

11,801,646,980

Financial Statement

DAEJOO E&T CorporationSTATEMENTS OF OPERATIONS

FOR THE YEARS ENDED DECEMBER 31,2007, 2006 AND 2005Korean Won

2007 2006 2005

SALES Sales-finished goods 24,529,425,944 15,474,692,585

22,077,868,795

Sales-merchandise 8,677,467,875 19,720,398,474

10,186,721,455

Construction revenue 5,185,712,300 9,267,834,712 150,947,171

38,392,606,119 44,462,925,771 32,415,537,42

1 COST OF SALES

Cost of finished goods sold 20,790,448,013 13,567,595,917 20,550,573,46

0 Cost of cmerchandise sold 7,656,250,253 17,883,810,136 8,545,153,098 Cost of completed construction 4,542,349,418 7,759,303,593 210,556,363

32,989,047,684 39,210,709,646 29,306,282,92

1

GROSS PROFIT 5,403,558,435 5,252,216,125 3,109,254,500

SELLING AND ADMINISTRATIVE EXPENSESSalaries 1,160,328,449 1,026,389,538 441,587,761 Serverance benefits 65,011,174 272,032,125 42,911,422 Employee benefits 134,473,246 137,640,710 71,917,849 Travelings 20,055,122 46,560,606 18,957,066 Entertainments 64,423,510 92,515,632 41,595,870 Communication 17,847,993 16,261,285 11,024,290 Utilities expense 11,452,582 40,733,179 224,310 Taxes and dues 15,927,705 8,949,914 9,452,290 Depreciation 66,178,727 68,117,563 34,031,884 Rental expenses 107,028,932 142,685,000 44,160,000 Repair expenses 26,275,024 62,915,440 203,000 Insurance 72,726,634 91,011,354 47,177,969 Maintenance expenses for cars 24,912,220 34,648,994 8,528,254 Ordinary research and development expenses - - 37,806,929 Freight expenses 475,686,228 350,233,876 288,337,803 Education and training expenses 720,909 420,000 1,450,000 Books printing expenses 14,501,402 8,724,998 8,882,410 Packaging expenses 52,143,243 38,978,000

-

Office supplies expenses 10,014,407 6,401,828 1,283,813 Supplies expenses 133,703,324 374,721,827 3,769,000 Fee of services 306,919,986 150,047,846 92,132,180 Advertisements 31,472,727 25,982,800 5,150,000 Bad debt expence 234,632,388 117,987,717 1,867,297 Sales commissions - 3,069,395

-

3,046,435,932 3,117,029,627 1,212,451,397

INCOME FROM OPERATIONS 2,357,122,503 2,135,186,498 1,896,803,103

Financial Statement

DAEJOO E&T CorporationSTATEMENTS OF OPERATIONS

FOR THE YEARS ENDED DECEMBER 31,2007, 2006 AND 2005

Korean Won2007 2006 2005

OTHER INCOMEInterest income 95,213,248 102,894,247 73,153,973 Forein exchange transaction gains 157,385 25,393,859 124,376,410

Forein currency transaction gains 1,588 - 60,812,090

Gain on disposal of property and equipment

- 71,902,341 2,153,545

Equity income from investment securities 222,996,155 - 470,471,963

Rental income 6,409,093 4,138,184 3,818,184 Gain on prior period error corrction 12,808,592 Miscellaneous income 33,006,893 124,583,950 114,308,765

370,592,954 328,912,581 849,094,930

OTHER EXPENSESInterest expense 245,500,884 173,322,402 153,027,260 Forein exchange transaction losses 26,883,059 27,102,772 3,957,114

Forein currency transaction losses 80,514 - 500

Donations 800,000 -

-

Other bad debt expenses 96,025,859 7,170,400 25,400,000 Corperation tax paid in addition

- 2,625,870 29,065,260

Lose on disposal of investment securities 232,670 - 140,390

Lose on disposal of accounts receivable-other 152,987,514 54,014,731 7,163,706 Equity Losses on Investments 244,819,757 145,261,796

-

Loss on prior period adjustment 5,539,520 2,473,366 2,322,282 Miscellaneous lose

772,869,777 　 411,971,337 221,076,512

ORDINARY INCOME 1,954,845,680 2,052,127,742 2,524,821,521

EXTRAORDINARY ITEMS

-

-

-

INCOME BEFORE INCOME TAXES 1,954,845,680 2,052,127,742 2,524,821,521

INCOME TAXES EXPENSE 606,330,678 546,578,208 595,756,876

NET INCOME 1,348,515,002 　 1,505,549,534 　 1,929,064,645

Financial Statement

Company Profile

History

Established Gooweol Steel Company1989. 06.

Turning to Gooweol Steel Co. Ltd.1990. 03.

Merge & Acquire DaeKyung Steel Industry Co.1998. 06.

Making an annual agreement with KDHC and IIAC for PIP

1998. 08.

Making an annual agreement with KEPCO for Yeo Soo

1999. 10.

Increasing capital to a billion Korean won1999. 12.

ISO 9001 and GQ Certification2000. 07.

Selected to the superiority products from Public Procurement Service

2000. 12.

Acquired the PIP production plant from Hyundai Hysco

2001. 03.

Acquired the Elevator Guide Rail Production from Hyundai steel

2002. 07.

Honored by the President of the Republic of Korea in the Conference

2006. 03.

Changed Company Name to Daejoo E&T Co. Ltd.2006. 12.

High efficient energy-saving system qualification by Korea Energy Management Co.

2007. 01.

Company Profile

Organization chart

Administration Team

SalesTeam

KongJooFactory

SiHwaFactory

- Administration Team- Production Team- Quality Management Team

CEO

Vice President

- Production management team

- Domestic - Foreign - HR

- Office Affair- Accounting- HR

Company Profile

Business Field

1. Pre-Insulated Pip (PIP) What is PIP (Pre-insulated Pipe)?

It is an innovative heat insulation system to simplify work process and reduce working hours & cost compared with complicated normal piping insulation before like insulation work, exterior protection and jacket process after finishing piping since all piping materials of PIP are produced completely with insulation process in our factory site at once.

The Keynote of PIP

A. Wide option rangeA wide option ranges are available regardless of material and dimension for carrier & casing pipe and insulation. It is able to produce any kinds of carrier & casing pipe likes steel, stainless steel, copper, PE, PVC, aluminum spiral and etc. Also, it is able to produce any kind of insulation material regardless of its thickness.

B. Superiority heat insulation

Using rigid polyurethane foam as a insulation material, of which thermal conductivity is the most superlative on earth at present Hot water temperature drops less than 1 after carrying 40km distance.

C. Easy carrying out construction works

Due to all pipes and fitting types are produced by insulation process,, it could reduced the construction period and cost and assiste the completed insulation works.

D. Economical PIP

No need to add insulation works during piping works. Heat loss is almost zero due to the superiority of insulation material. Maintenance caused free for insulation material.

Company Profile

Business Field

1. Pre-Insulated Pip (PIP)

Applications

Application Application of PIP of PIP

District Heating/Cooling System

Centralized Heating/ System

Hot and Cold MaterialTransportation

Temperature SensitiveChemical Material

Low Temperature Pipe

Anti Winter-Sowing

Any other Materials needed

Thermos Heating

Company Profile

Business Field


Structure of PIP

STRUCTURE DESCRIPTION

Carrier Pipe Steel, Ductile Iron, Stainless Steel, PE, Copper., etc

Insulating Material

Insulation Type(Below to 120C ) Rigid Polyurethane foam

High temp.(Above to 120C)

Rock Wool + PUR /Silica or Perlite + PUR

Casing PipeHDPE Underground & Indoor Piping

Lock Seam Pipe( duct, etc) Exposed aboveground Piping

Leak Detection Wire Leak and others liquid detection

Company Profile

Business Field


PIP List

District air-conditioning and heating systemCentral concentrated heating systemProtecting water supply facilities and sewage system from burst in winter seasonTransferring the chemical material and oil which are sensitive to heatPiping for ultra low temperatureSteam piping for high temperatureTransferring hot spring water

[ TWIN PIPE ]

Carrier Pipe

Leak Detection Wire

▷ Option

• Resistance Comparative Method

• Impulse Method

Rigid Polyurethan Foam

Casing Pipe

Company Profile

Business Field

1. Pre-Insulated Pip (PIP) General Description

DESCTIPTION STANDARDCarbon Steel Pipes for Pressure Service (SPPS) KS D 3562Electric are Welded Carbon Steel Pipes (SPW 400) KS D 3583Carbon Steel Pipes for Ordinary Piping (SPP) KS D 3507Galvanized Steel Pipes for Water Service (SPPW) KS D 3537Carbon Steel Pipes for High Temperature Service (SPHT)

KS D 3570

Ductile Iron Pipes KS D 4311/ ISO2531Stainless Steel Pipes (STS) KS D 3576Seamless Copper and Copper Alloy Pipes KS D 5301Polyethylene Pipes for Water Service KS D 3408

(1) CARRIER PIPE

(2) INSULATING MATERIAL

• Silica or Rock Wool with P.U.Foam is used for Steam Line with high temperature• Silica or Rock Wool can be applied to temperature at 180, 250, and 300 respectively

A. POLYURETHANE FOAM

DESCTIPTION CRITERIA STANDARDDensity 60 ~ 90 Kg / m3 ISO 845Shear Strength 200 Kpa ISO 1922Compressive Strength 300 Kpa ISO 844Flexural Strength 300 Kpa KS M 3809Adhesive Strength 200 Kpa DS 2178Closed Cell Content 88% ASTM D 2856Thermal Conductivity 0.026 W /mK ASTM C 335Water Absorption 3.0 g / 100cm3 KS M 3809

Company Profile

Business Field

1. Pre-Insulated Pip (PIP) General Description

B. MINERAL WOOL

DESCRIPTION CRITERIA

Density 125 Kg / m3

Thermal Conductivity 0.069 W /mK ( 165 C )Compressive Strength 1.2 Kg / m2

Heat Resisting Property 400 C

C. SILICA

DESCRIPTION CRITERIA

Density 170 Kg / m3

Thermal Conductivity 0.047 ~ 0.053 W / mK ( 75 C )Compressive Strength 2.0 Kg / m2

Heat Resisting Property 650 C

(3) CASING PIPE

• Underground: HDPE Pipe

• Above ground: Aluminum Spiral Pipe

DESCRIPTION CRITERIA STANDARDDensity 940 ~ 970 Kg / m3 SFS 3152Oxidation 0.50 SFS 4239Impact Strength 10 mJ /mm2 ISO 179Stress Crack Resistance 200 h ASTM D 1603Percentage Elongation 500 % ISO R 527Contents Carbon Black 2.4 0.6% ASTM D 1603Melting Movement Index 0.3 ~ 1.5 g / 10min ISO 1133Yield Strength 17 Mpa ISO R 527Percentage Longitudinal Reversion 3 % ISO 2506

Company Profile

Business Field


Type of PIP

Hot Water / Less than 120

- Carrier Pipe : Steel, Stainless, PE

- Casing Pipe : HDPE

Pipe(underground)

- Pipe and insulation’s

specifications are optional.

Water service purpose - Above Ground - Structure : steel pipe( Epoxy coated inside) + PUR + Al Spiral pipe - Specs : . carrier pipe : steel pipe for water service , ductile iron pipe, PE, white pipe, Stainless steel . casing pipe : HDPE, Al Spiral pipe

Company Profile

Business Field


Type of PIP

Steam - Above Ground - Above 150 ~ below 250 - Steel pipe+Silica+PUR+Al Spiral - Spec : Carrier pipe KSD 3562 basis of A53 Gr.B

Low temperature gas - Above Ground - Low temperature gas - Steel pipe+PUR+Al Spiral

Company Profile

Business Field


Type OF PIP

[ Straight PIP ] [ T Bend PIP ]

[ T Bend PIP ] [ L Bend PIP ]

Company Profile

Business Field


Type of PIP

[ Reducer PIP ] [ Anchor piece ]

Company Profile

Business Field

2. Steel In Steel Pipe (SIS) What is SIS (Steel In Steel Pipe)?

It is a kind of heat and underground laying piping which is designed for laying under the ground directly. Since the heat expansion of carrier pipe is covered or treated with casing pipe by itself, this is an advanced technology heating piping system as well as it has low raw material cost, a rapid building period and outstanding safety. It can be not used to wide range of temperature, fitfuled for high temperature steam piping system.

The Keynote of SIS

A. Sectional structure of SIS

The insulation is composed of rock wool and air gap, and the sliding force for heat expanding is covered by the space between a roller and a casing pipe through a roller and a support unit.

B. SIS straight pipe

For high temperature pipe over 150 . Steel pipe + Rock wool + Air gap + Steel pipe (PE or TAR coating)

Company Profile

Business Field

3. TSC Method

What is TSC Method?

It is the most versatile system on the market for joining pre-insulated pipes with welded sleeves. The method is characterized by it’s ability to unify flexibility and cost efficiency with maximum quality. This makes TSC a unique method suitable for both new production and repairs.

The Keynote of TSC Method

A. Flexibility

Use standard PHE-pipes (sleeves) as joint material (one size bigger, not shrink material)Can apply on any size 100 – 1200mm with the same toolsPossible under difficult conditions

B. Quality

Can be in full operation during replacements. No need to cut the carrier pipeCan make joints up to 6 mCan custom made any type of sleeves on site

Computer-controlled joint weldingLeakage test under pressure Very high repeatabilityEuropean certification EN 489:2003No leakages after 20 times EN-norm demands (2000 cycles) at FFI-test Institute, Hannover

C. Life time

Estimated lifetime on PEH-pipes is around 70 yearThe joints has always been the weakest pointThe TSC-weld have the same strength as the PEH-jacket The welding technique use only PEH-material

Company Profile

Business Field

4. Machine equipment Work

Turn-Key Services

DaejooE&T provides Design-Build, with wide ranges of engineering services, provides full service turn-key projects serving as your partner from start to finish.

The benefits for our clients :

• A firm fixed price for total build-out• One contact for all services• Timely completion to generate earlier revenue• Elimination of multiple mark-ups• Project continuityFrom conception to project completion, DaejooENT Design-Build can

provide all the resources to complete your full serviced turn-key project

Construction Management

From conception to completion in our team is extremely diversified in the types of construction projects and services we perform. Our experience includes using General Construction, Construction Management, Design-Build, Design-Build-Finance and Turn-key methods of project delivery.

Construction Management Services :

Conception• Design• Site Acquisition• Financial Planning

Pre-Construction• Architectural/Engineering Services• Design Analysis• Project Budgeting• Plan & Specification Review• Value Engineering• Contractor Bidding• Scheduling

Construction• Construction Supervision• Budget Monitoring/Control• Quality Control• Safety Monitoring• Claims Control

Post-Construction• Project Closeout• Occupancy Coordination• Warranty Management

Certificates & Licenses


[ Registration of Business ]



[ Machine equipment Work ]



[ Earth Work ]



[ Member of Trading Association ]



[ ISO 9001 ]



[ ISO 14001 ]



[ Utility Model Patent ]



[ Twin Pipe Patent ]



[ Elevator Rail ISO 9001 ]

[ Superiority products Mark ]

[ Elevator equipment Work ]

[ TSC Method ]



[ Energy Service Company ]

[ Renewable Energy Service ]

[ Venture Company Confirmation ]

[ Innovation Business ]

Equipment & Technologist Equipment retention present condition


Serial No. Name Model Spec. Maker

M-001 AUTOMATIC GAS CUTTING M/C IK-1500G 4000*4000 KOIKEM-002 LATHE M/C 3ABOA 700Ø*3000 RUSSIAM-003 ARC WELDER PY-50 30KM DAE YANGM-004 TIG ARC WELDER DH500MX 500A DAE HOM-005 CO2 ARC WELDER 500SF 500A DAE HOM-006 PIPE GAS CUTTING M/C - 100A ~ 850A DAE HOM-007 DRILLING M/C - 40Ø*500 DAE DONGM-008 CHAIN HOIST - 2TON BANDOM-009 BEND SAWING M/C WBS 550A ~600A WOON GONGM-010 BEND SAWING M/C - ~500A KYOUNG DONGM-011 AIR COMPRESSOR MICOS 37 9.5 BAR YUJIN MCM-012 AIR COMPRESSOR SAS-10P 15 BAR GOLD STARM-013 WATER CHILLER HYC-3B 2-30 Hayoung KoreaM-014 M.D.I TANK - 25000ℓ Self-manufacturedM-015 OVER HEAD CRANE - 2.8TON(20M*60M) Samwha ENGM-016 OVER HEAD CRANE - 2.8TON(20M*60M) Chungmu ENGM-017 OVER HEAD CRANE - 2.8TON(15M*84M) Samwha ENGM-018 VERTICAL BEND SAWING HV-400N - Hoejun pre.M-019 REDUCER M/C - - Hyundai Indu.M-020 Battery Forklift HBF 25H 2500KG Hyundai Indu.M-021 SHOT BLAST M/C - 20Ø-850Ø Samkwang shotM-022 PE - BUTT W/D TABLE - 15A-1100A Self-manufacturedM-023 PE-BUTT WELDING HEATER - 15A-1100A Taeyoung Ele.M-024 HENNECKE FORMING M/C HK250(300L) 2KG/SEC HENNECKEM-025 BAND SAWING M/C - ~1100A KYOUNG DONGM-026 EXTRUDER WELDER EL-1 0.5KG/SEC OJOOM-027 BEND FORMING FRAME(S) - 25A-200A Self-manufacturedM-028 BEND FORMING FRAME(M) - 250A-400A Self-manufacturedM-029 BEND FORMING FRAME(L) - 450A-850A Self-manufacturedM-030 TEE FORMING FRAME - 300A*600A Self-manufacturedM-031 PE WELDER FRAME - 20A-850A Self-manufacturedM-032 Tower Crane - 1ton BANDOM-033 AIR DRYER HYD-75 1Ø,440V,60Hz,10.5 Hayoung KoreaM-034 PACKING M/C - 20A-1100A Sung Won ENG.M-035 PIPE FORMING TABLE - 1400W-1200L*860H DONG WOOM-036 INSERTING M/C - 0.6W-20ML DONG WOOM-037 PU-FOAMING M/C HKC-2500 4KG/SEC HENNECKM-038 PE SLEEVE M/C - 90Ø-400Ø Self-manufacturedM-039 PE SLEEVE DRILLING M/C DA-360 90Ø-1100Ø DOAGA PRE.M-040 CONVEYOR - 0.9W*50M Self-manufacturedM-041 SENSOR WIRE M/C - - Self-manufactured

Equipment List


Test & Inspection Equipment ListNO. Equipment Maker Model Setting Test Item

QT-1Universal Testing

Machine

Kyeongdo high

techKDMT-156

Capa. : 1TON

ELECTRIC POWER :

AC 220V 0.5HP

Shear,Flexural,

Compressive,Yield

Strength

QT-2Compressive

testerOrder DK-CT50

Capa.: 50M/T

Smallest scale :1kgf

Oil pressure(digital)Adhesive force test

QT-3Thermal

Conductivity testerKYOTO ELECT QTM-D3

0.023-11.63W/m.k

Auto Printing

Thermal

Conductivity test

QT-4Impact Strength

testerTinius Oslen 691 Capa.:23J Impact Strength test

QT-5Melt flow index

testerTinius Oslen MP987 Capa.: 0~300

PE Melt flow index

test

QT-6High temperature

dryerKYOTO ELECT E1-01H

Range:15~300

Smallest scale : 1

PE Longitudinal

Reversion test

QT-7AIR COMPARISON

PYCNOMETERBECKMAN

MODEL

930

MAX : 50CC

Precision : 0.01CCClosed Cell test

QT-8 FILM VIEWERKyung Do

EnterpriseDF-2B

Size : 41/2"*17"

110V,3AR/T Film reading

QT-9 Electronic balance SARTORIUS BA-4100SCapa.: 4100g

Precision : 0.01g

Density & Water

absorption test

QT-10 Electronic balance SARTORIUS BP 190SCapa.: 200g

Precision : 0.1mgPE Density test

QT-11 MULTI TESTER HUNG CHANG HC-260TR

200Ω ~ 20

Error of

measurement : ±

1%

Wire resistance

measurement


Test & Inspection Equipment List

NO. Equipment Maker Model Setting Test Item

QT-12 Agitator Hannamchemical PL-SS41D100W,3000RPM,22

0V

Undiluted solution

mixture

QT-13 INSULATION TESTERYOKOGAWA

88MD0059MY10-04

500V/1000

0 ~ 300V

Wire disconnection

test

QT-14 INSULATION TESTERYOKOGAWA

85MC0561MY10-03

500V/1000

0 ~ 300V

Wire disconnection

test

QT-15 BRANDES TESTERBRANDES

558BS-MH2

0.5 ~50

Measuring range:

0.05~1.5km

Wire test

QT-16 BRANDES TESTERBRANDES

1001BS-MH2

0.5 ~50

Measuring range:

0.05~1.5km

Wire test

QT-17Digital Vernier

CalipersMitutoyo CD-20CP

Error of

measurement:0.05

Capa:0~200

Thickness length

measurement

QT-18 Digital Micro Meter Mitutoyo 395-541-30

Error of

measurement:0.00

1

Capa:0~25

Thickness

measurement

QT-19Thermal

Conductivity testerLaser Comp MA01906 0 ~ 50

Thermal

Conductivity

test

QT-20 THERMO METER Han Young HY-550 Range:-50~1200

Surface

temperature

measurement

QT-21Supersonic

thickness testerELCOMETER C205-1

Range:

1.02~152.4

Precision :0.01

Thickness

measurement

Equipment & Technologist Technologist retention present condition

• Certified Industrial Engineer for Fire Fighting Facilities(Electrical)

• Certified Industrial Engineer for Gas

• Certified Industrial Engineer for Fire Fighting Facilities(Mechanical)

• Engineer Electricity

• Engineer Construction Equipment

• Professional Engineer Air-conditioning Refrigerating Machinery

• Professional Engineer Air-conditioning Refrigerating Machinery • Industrial Engineer Boiler

• Engineer Heat Consumption Management

• Craftsman Surveying

• Craftsman Electric Welding

• Craftsman Machine Fitting

• Craftsman CNC Lathe

• Craftsman CNC Milling

• Engineer Civil Engineering

• Engineer Architecture

• Craftsman Fork Lift Truck Operator • Engineer Industrial Safety

• Industrial Engineer Mechatronics

by Human Resources Development Service of KOREA

The Result of Building in Major Construction Major Construction

Shiwha Complex, KOREA / Heat-Pipe laying Construction

• 2006. 02. ~ 2006. 06.• 400A, 5.2 ｘ 2line, 16kg/


Incheon Community Energy Supply System, KOREA Steam-Pipe laying Construction

• 2007. 12. ~ Now• 1000A, 7.7 ｘ 2line, 16kg/


Yeosu Complex Heat-Pipe laying Construction

• 2006. 12. ~ 2007. 10.• 150A, 6.7 ｘ 2line, 10kg/


Cheonan Community Energy Supply System, KOREA Heat-Pipe laying Construction

• 2007. 12. ~ 2008. 06.• 450A, 4.7 ｘ 2line, 16kg/


Ammonia Unloading, Storage and Distribution System, Madagascar Pipe laying Construction• 2008. 10. ~ Now

• 450A, 14 ｘ 2line, 16kg/


Ulan Bator Community Energy Supply System, Mongolia Water-Pipe laying Construction• 2005. 10. ~ 2006. 06

• 150A, 3.9 ｘ 2line, 10kg/


Sakhalin Energy, Storage and Distribution System, Russia Pipe laying Construction

• 2005. 06. ~ 2006. 10• 300A, 2.8 ｘ 2line, 20kg/


Ålesund, Norway 2003, 1400 joints ø400, Cold pipes

The Result of Building in Major Construction Previous Experience List

No. Contractor Project Name Q'ty Unit Remart

1 Hanmi pharm Co., Ltd Water Piping System 1 lot manufacture & installation

2 Sulim Industry Co., Lyd. Maching Piping Line (Steam Line) 1 lot manufacture & installation

3 Samsung Heavy Industries Co., Ltd. Ilsanccpp Exhaust manufacture 1,800 ton manufacture

4 Samsung Engineering Co., Ltd. Indonesia Refinery Flare Stack 1 lot manufacture

5 Samsung Heavy Industries Co., Ltd.Bangkok BPCX water Treatment System

(internal Part others)180 ton manufacture

6 Hansol Paper Co., Ltd. Reject Cocveyor & Tank 1 lot SUS

7 Nongsim gellog Co., Ltd. Color Tank Line 1 lot SUS

8 Nongsim gellog Co., Ltd. Steam Piping Line 1 lot manufacture & installation

9 Korea Heat Exchange Co., Ltd. Heat Exchanger Tank 1 lot manufacture & installation

10 Kecc Co., Ltd. Hyundai Department Parking Tower 980 ton manufacture & installation

11 Samsung Heavy Industries Co., Ltd. Ilsan Composite Thermal Power Plant 1,200 ton manufacture & installation

12 HwaSeong Paper Co., Ltd. Piping Line 1 lot SUS

13 Onyang pulp Co., Ltd. Machinery Installation 1 lot installation

14 Korea Heat Exchange Co., Ltd. Bundang Area Heating System 1 lot manufacture & installation

15 Korea Smithers Oasis Co., Ltd. Production Equipment Plant 1 lot manufacture & installation



16 Daelim Industrial Co., Ltd. Incheon LNG Station SUS Piping Line 1 lot manufacture & installation

17 Samsung Engineering Co., Ltd. Sansung Petrochemical Pipe Line 1 lot manufacture & installation

18 Samsung Engineering Co., Ltd. Gas Line 1 lot manufacture & installation

19 Daejoo Heavy Industry Co., Ltd. Cheongjoo Area Heating Line 358 ton manufacture

20 Samsung Engineering Co., Ltd. Water Treatment System Pipe Line 1 lot manufacture & installation

21 SK Qatar Refinery Plant 1 lot manufacture & installation

22 Daelim Industrial Co., Ltd. Kuwait Power Plant 1 lot manufacture & installation

23 Hyundai Motors Co., Ltd. Machinery Piping Line 1 lot manufacture & installation

24 Daejoo Heavy Industry Co., Ltd. Ansan combined Heat & Power Plant 1 lot manufacture & installation

25 Hanma Heavy Industry Co., Ltd. Kuwait New Oil Project 6,000 ton manufacture & installation

26 Selim Petrochemical Co., Ltd. Chemical Piping Line 1 lot manufacture & installation

27 Jinyoung Paper Co., Ltd. Waste Water Treatment Internal Piping Line 1 lot manufacture & installation

28 Daelim Industrial Co., Ltd. Kuwait Refinery Plant 1 lot manufacture & installation

29 Korea Cottrell Co., Ltd. Tangjin Thermal Power Plant Unit 5 & 6 Ash Handling System Project 1 lot manufacture & installation

30 FLOUR DANIEL La Laguna Power Plant 1 lot manufacture & installation



31 Korea District Heating corp. District Heating Piping System (Goyang & 12EA Area) 1 lot manufacture & installation

32 GS Power Co., Ltd Anyang, Buchun Heating Piping System Construction 1 lot manufacture & installation

33 INCHON Total Energy Company Incheon Song-Do Piping System Construction 1 lot manufacture & installation

34 INCHON International Airport corp. Young Jong do Airport Piping System Construction 1 lot manufacture & installation

35 KOREA National Housing Corporation Incheon NonHyun Land-Development Piping System Construction 1 lot manufacture & installation

36 KOREA C.E.S Kwang Joo Convention Center Piping System Construction 1 lot manufacture & installation

37 STX COMPANY Banweol STX Thermal Power Plant Supply of SIS pipe & Fittings 1 lot manufacture & installation

38 KO-Heung County office Naro-Island 1Bridge, Water Supply Pipe System Construction 1 lot manufacture & installation

39 KIA MOTORS Co., Ltd. Hwa Sung Production Plant Supply of SIS pipe & Fittings 1 lot manufacture & installation

40 HYUNDAI ASAN Kum Kang Mount. Thermal Line 1 lot manufacture & installation

41 OSAN Energy Osan Area Piping System Construction 1 lot manufacture & installation

42 Korea Energy Management Company TaeJun Techno valley Heating Piping System Construction 1 lot manufacture & installation

43 Hyundai Engineering & Construction Co., Ltd. Busan Jung Kwan Complex Energy District Heating Piping System 1 lot manufacture & installation

44 KONG JU City (Water Supply Party) Kong-Jun Great Bridge Expansion Const. for Water Supply Pipe Line 1 lot manufacture & installation

45 PUSAN City GAS SK-Enron Company Hae Won Dae New City District Heating Piping System 1 lot manufacture & installation



46 ANSAN Metropolitan Development corp. Ansan District Heating System Construction 1 lot manufacture & installation

47 Hyundai Engineering & Construction Co., Ltd. District Heating Piping System Construction 1 lot manufacture & installation

48 Shin-Ahn County office Hong-Do 1 Area Water Supply Line 1 lot manufacture & installation

49 BUSAN Construction Headquarters Busan Nak-Dong Liver Bridge Expansion Const. for Water Supply 1 lot manufacture & installation

50 Khurd Company / Mongolia Supply of Pre-Insulated Steel pipes and Fittings 1 lot manufacture

51 JTS Engineering / Mongolia Contract C-2973-MOG//2IS3 Supply of Water proof Material 1 lot manufacture

52 UB heating Company District Heating Piping System Supply of Pre-Insulated Pipe 1 lot manufacture

53 Project Management Unit / Mongolia Supply of Pre-Insulated Polyethylene Water Pipes and Fittings 1 lot manufacture

54 YANTRA Co. / Russia Sakhalin Housing Construction Supply of PIP 1 lot manufacture

55 KORICO ENC / Russia Mega-Polis Apt.& Hotel Const, Heating supply Line in Sakhalin 1 lot manufacture

56 FOR CORE Co., Ltd. / Russia Housing Construction Supply of PIP 1 lot manufacture

57 DAI NIPPON Const. / Mongolia The Project for Improvement of Water Supply Facilities in UB 1 lot manufacture

58

59

60

qualification statement

Documents