1 of 4 | P a g e

Mohammed Said Mohammed ElSayed

Address: 25 Elshohada St – Suez – Suez – Egypt E-Mail: m_said92@hotmail.com Cell Phone: +20 12 22 906 205 Home Phone: +2 062 3333862 : theforce4top : eg.linkedin.com/pub/mohammed-said/88/a3/823

Objective

Seeking challenging assignments with a growth oriented organization and

innovative work environment.

Career Summary I possess 2 Years of progressive full-time work experience in the

QA/QC and inspection fields, where I have capability to adapt in

various situations. I achieve a lot of successes by delivering projects

with quality meets client's satisfactions by working as a contractor

representative and ensure the absence of nonconformities by acting

proactively & implementing continual improvement processes by

working as a client representative.

Career History EPHH (Egyptian Petroleum HH Rig Manufacturing)

Apr-2014 Till PRESENT

As QA/QC Engineer, where 1- I carry out QA/QC of all Inspection & maintenance activities and project

work.

2- Prepare & implement applied code and ITP of the project (have good

knowledge of API, ASME and AWS codes).

3- Preparation of NDT procedures according to codes and project

specifications.

4- Preparing & Reviewing & assuring of PQRs and WPSs as per project

requirement, Welder performance qualification, welders ID card & daily

welding progress.

5- Ensure all requirements of ISO 9001 & API Q1 & ISO/TS 29001 & API 4F

are implemented in site.

2 of 4 | P a g e

6- Materials control, Traceability and inspection.

7- Responsible to inspect the product during the process and perform the visual

check, eliminate what is non conformity with international welding codes.

8- Supervise the repair task of the repairable product in accordance to

approved repair procedures.

9- Follow up the manufacture recommended working procedure of the

production line equipment and ensure that the instruction is understanding and

implemented.

10- Reporting incidents of field nonconformities or product failures to quality

manager.

11- Ensure the analysis of field nonconformities, provided the product or

documented evidence supporting the nonconformity is available to facilitate

the determination of the cause.

12- Ensuring that the products satisfy the design acceptance criteria or

manufacturing acceptance criteria.

13- Ensuring from continual improvement and take decisions based on

gathering information and analysis of data.

14- Ensure all the warehouse and factory equipment are calibrated and follow

up updated calibration plan.

15- Analysis of welding defects causes and its extent to take the necessary

corrective action to eliminate the defects sources.

EMC (Egyptian Maintenance Company)

Aug-2013 Till Apr-2014

As Quality Control Engineer, where 1- Witnessing NDT inspection methods, which are radiographic testing (RT),

ultrasonic testing (UT), and Liquid penetrate testing (PT), and magnetic

particle testing (MT) and hydrostatic pressure testing.

2- Issuing equipment Inspection Reports documenting all the findings, NDT

results, repairs/ replacements to the equipment are recommended.

3- Checking fit up of the joint before start welding operation as per the detailed

drawing (root gap, bevel angle, surface mismatch).

4- Preliminary visual inspection of joints after welding.

5- Interpretation Radiographs of welded joints in accordance with International

Codes and Standards (ASME, ASTM, API, ISO, DIN and ASNT).

6- Prepare documentation for final hand over.

Certificates 2015 Lead auditor ISO 9001 (IRCA & LRQA)

Certificate No.: 15/3102

3 of 4 | P a g e

2013 LII (5 Methods) within the requirement of ASNT-SNT-TC-1A

Ultrasonic Test (UT) Certificate No.: NDT-UT-013-799

Dye Penetration Test (PT) Certificate No.: NDT-PT-013-860

Magnetic Particle Test (MT) Certificate No.: NDT-MT-013-842

Visual Test (VT) Certificate No.: NDT-VT-013-629

Radiographic Test (RT) Certificate No.: NDT-RT-013-738

2014 OSHA – Occupational Safety Health Administration (Awareness)

Certificate No.: ISSC-029-13-003

2009 ICDL – Proficient in MS Office applications Certificate No.: EGY000245409

Courses 2015 AutoCAD 2D from certified Autodesk trainer. 2011 [Summer training] Arab Petroleum Pipelines Company ( SUMED) 2011 [Summer training] Nasr Petroleum Company ( N.P.C )

Education Faculty: petroleum and mining engineering, Suez University

Degree: B.sc of metallurgical & materials engineering, @ 2013,

Cumulative Grade: GOOD ( 71.48 % & 2.9 GPA )

Project: Corrosion and Corrosion Control in Refinery Industry,

Grade: A Excellent

High School: ILS (languages school) , 91.4%

Computer Skills All Windows operating systems applications.

Full Microsoft office.

AutoCAD.

Languages Arabic: Native Language

English: Fluent reading, writing & conversation

French: Beginner

Skills Analytical, good attention to details, self-learner, creative, Hard worker.

Ability to provide innovative ideas in different areas.

Excellent communicator and have ability to build and maintain a good

relationship with clients.

4 of 4 | P a g e

Personal Data Name: Mohammed Said Mohammed Elsayed

Gender: Male

Nationality: Egyptian

Date of birth: 9/3/1992

Marital state: Single

Military Service: Exempted

Driving licenses: Valid

Hobbies Body Building

Running

Swimming

Reading

Reference Depend upon request.