pumps equipment description/sops - stlcc.edu :: … · pumps equipment description/sops prepared...

12
STLCC-CPLS;Morrison 5/9/2011 Page 1 Pumps Equipment Description/SOPs Prepared by: Bob Morrison STLCC , Instrumentation Specialist Jul09 , Latest Revision May 2011 Buchi Vacuum V-500, @FV Scilog Expert Peristaltic, @FV, @BRDG Millipore; @FV Peristaltic XX800, 230V LaboPort KNF Vacuum , @FV (air/gas) UN 820 FTP Masterflex L/S Peristaltic@FV ColePalmer Fisher, Vacuum MaximaCPlus, @FV Millipore; Peristaltic@FV XX820 , 230V FromSigma Magnetec Vacuum JB series, @FV

Upload: truongbao

Post on 26-Jul-2018

219 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Pumps Equipment Description/SOPs - STLCC.edu :: … · Pumps Equipment Description/SOPs Prepared by: Bob Morrison ... Millipore, Supplies, Tubing ... (2.5L tank) 200mmHg 52

STLCC-CPLS;Morrison 5/9/2011 Page 1

Pumps

Equipment Description/SOPs

Prepared by: Bob Morrison

STLCC , Instrumentation Specialist

Jul09 , Latest Revision May 2011

Buchi Vacuum

V-500, @FV

Scilog Expert

Peristaltic, @FV,

@BRDG

Millipore; @FV

Peristaltic

XX800, 230V

LaboPort KNF

Vacuum , @FV

(air/gas)

UN 820 FTP

Masterflex L/S

Peristaltic@FV

ColePalmer

Fisher, Vacuum

MaximaCPlus, @FV

Millipore;

Peristaltic@FV

XX820 , 230V

FromSigma

Magnetec Vacuum

JB series, @FV

Page 2: Pumps Equipment Description/SOPs - STLCC.edu :: … · Pumps Equipment Description/SOPs Prepared by: Bob Morrison ... Millipore, Supplies, Tubing ... (2.5L tank) 200mmHg 52

Pump: Peristaltic, Benchtop, Digital, Magnetic and Tube Drive Heads

STLCC-CPLS;Morrison 5/9/2011 Page 2

ACTUAL MODEL: Scilog, Expert , Digital

Benchtop analog drives provide continuous-duty operation with

Micropump® A-mount pump heads. Gradual, one-second acceleration

offers smooth control of drive speed and flow rate.

The permanent-magnet, direct-current (PMDC) drive is built to last, so

is excellent for long-term applications.

Benchtop digital drives have calibrate, copy, and dispense features,

which produce precise, pulseless batching and dispensing.

Displacement and flow values for all Micropump® A-mount pump

heads are stored in memory - simply enter the pump head size (gear

code) to retrieve the displacement per revolution. An IP23-rated

enclosure protects the internal components. The controller has a

DB15F connection to the optional foot switch for hands-free on/off

control.

Scilog Expert Micropump

1. Toggle on/off on rear of case.

2. Use digital screen and Set to Manual mode

3. Push RATE button and use up/down arrows

to set pump at 60% for startup and priming.

4. Select RUN to start pump, STOP to halt.

5. After source line fills to pump head and

priming is complete, adjust pump rate to

desired level.

6. Use lowest rate possible to avoid excessive

pressure in connecting lines.

Be sure to note flow

direction arrow on Head

Page 3: Pumps Equipment Description/SOPs - STLCC.edu :: … · Pumps Equipment Description/SOPs Prepared by: Bob Morrison ... Millipore, Supplies, Tubing ... (2.5L tank) 200mmHg 52

Pump: Peristaltic; Bench; Millipore, Analog, single head

STLCC-CPLS;Morrison 5/9/2011 Page 3

Drives

Variable-speed reversible drive has permanent

magnet DC motor and solid-state control. Tubing

diameter and pump head determine flow rate.

Toggle switch controls flow direction, potentiometer

controls flow rate/drive speed and red light

indicates power.

Pump Heads (must be ordered separately, see

next slide)

Polysulfone housings contain stainless steel roller

assembly.

Tubing (must be ordered separately, see next

slide)

Silicone tubing withstands 1.4 bar (20 psi)

pressure when operated for up to 20 hours at 500

RPM. Tygon® tubing withstands 1.4 bar (20 psi)

pressure when operated for up to 40 hours at 500

RPM. Norprene® tubing withstands 1.4 bar (20

psi) pressure when operated up to 1,000 hours at

500 RPM. Extend tubing life by operating at lower

pressures and slower RPM.

Materials

ABS plastic, fire-resistant with IP53 rating;

aluminum chassis; polysulfone/stainless steel

peristaltic pump heads; silicone, Tygon (PVC), or

Norprene (polyolefin) peristaltic tubing.

Millipore; XX8200 230

Be sure to note flow

direction arrow on Head

Page 4: Pumps Equipment Description/SOPs - STLCC.edu :: … · Pumps Equipment Description/SOPs Prepared by: Bob Morrison ... Millipore, Supplies, Tubing ... (2.5L tank) 200mmHg 52

Pump: Peristaltic; Bench; Millipore,Analog, no head

STLCC-CPLS;Morrison 5/9/2011 Page 4

Drives

Variable-speed reversible drive has permanent magnet DC

motor and solid-state control. Tubing diameter and pump head

determine flow rate. Toggle switch controls flow direction,

potentiometer controls flow rate/drive speed and red light

indicates power.

Pump Heads (must be ordered separately, see next slide)

Polysulfone housings contain stainless steel roller assembly.

Tubing (must be ordered separately, see next slide)

Silicone tubing withstands 1.4 bar (20 psi) pressure when

operated for up to 20 hours at 500 RPM. Tygon® tubing

withstands 1.4 bar (20 psi) pressure when operated for up to

40 hours at 500 RPM. Norprene® tubing withstands 1.4 bar

(20 psi) pressure when operated up to 1,000 hours at 500

RPM. Extend tubing life by operating at lower pressures and

slower RPM.

Materials

ABS plastic, fire-resistant with IP53 rating; aluminum chassis;

polysulfone/stainless steel peristaltic pump heads; silicone,

Tygon (PVC), or Norprene (polyolefin) peristaltic tubing.

Millipore; XX8000 230

Page 5: Pumps Equipment Description/SOPs - STLCC.edu :: … · Pumps Equipment Description/SOPs Prepared by: Bob Morrison ... Millipore, Supplies, Tubing ... (2.5L tank) 200mmHg 52

Pump Heads

Compare Catalogue No. Description

XX80EL004 Pump Head, 1000 mL/min 600 RPM » Add to Cart

XX80EL005 Pump Head, 1650 mL/min 600 RPM » Add to Cart

Tubing for use with XX80 000 03 pump head

Compare Catalogue No. Description

XX8000023 Tubing, 1/8 in. I.D. x 7.6 m, 20 psi, silicone » Add to Cart

XX8000T23 Tubing, 1/8 in. I.D. x 7.6 m, 30 psi, Tygon » Add to Cart

Tubing for use with XX80 EL0 04 pump head

Compare Catalogue No. Description

XX8000024 Tubing, 3/16 in. I.D. x 7.6 m, silicone » Add to Cart

XX8000T24 Tubing, 3/16 in. I.D. x 7.6 m, Tygon » Add to Cart

XX8000N24 Tubing, 3/16 in. I.D.x 7.6 m, 30 psi, Norprene » Add to Cart

Tubing for use with XX80 EL0 05 pump head

Compare Catalogue No. Description

XX8000025 Tubing, 1/4 in. I.D.x 7.6 m, silicone » Add to Cart

XX8000T25 Tubing, 1/4 in. I.D. x 7.6 m, Tygon » Add to Cart

XX8000N25 Tubing, 1/4 in. I.D x 7.6 m, Norprene » Add to Cart

Pump: Peristaltic;

Bench, Millipore,

Supplies, Tubing

STLCC-CPLS;Morrison 5/9/2011 Page 5

Page 6: Pumps Equipment Description/SOPs - STLCC.edu :: … · Pumps Equipment Description/SOPs Prepared by: Bob Morrison ... Millipore, Supplies, Tubing ... (2.5L tank) 200mmHg 52

Pump: Peristaltic; ColePalmer, MasterFlex L/S, Digital, With Tubing Head

STLCC-CPLS;Morrison 5/9/2011 Page 6

Flow rate: 17 to 1700 mL/min with included L/S® 24 tubing.

Reversible motor—purge tubing before or after pumping; pump fluid

in either direction.

Separate speed control and on/off/reverse switch with inertia center

and green LED power indicator. Maintain speed setting while turning

pump on/off.

The 1/10-hp motor has soft start and back EMF for ±2% speed

control. Promotes smooth operation and long service life.

Stackable ABS plastic housing; IP23 rated. Splash-resistant.

6-ft (1.8-m) line cord—115 VAC: U.S. standard plug; 230 VAC: IEC

320/CEE22 socket. Please specify ultimate destination country to

receive correct plug/cord set.

Specifications

Pump Series L/S

Pump head L/S® Easy-Load® II 77200-62

Tubing Tygon® LFL L/S® 24 tubing 06429-24 (10 ft)

Drive L/S® precision standard variable-speed drive 77521-40

rpm 6 to 600

Power VAC 115

Amps 1.5

Hz 50/60

Max flow rate ml/min 1700

Min flow rate ml/min 17

Speed control ±2%

Be sure to note flow

direction arrow on Head

Page 7: Pumps Equipment Description/SOPs - STLCC.edu :: … · Pumps Equipment Description/SOPs Prepared by: Bob Morrison ... Millipore, Supplies, Tubing ... (2.5L tank) 200mmHg 52

Pump: Peristaltic; VWR Minipump, Analog, Variable

STLCC-CPLS;Morrison 5/9/2011 Page 7

These variable flow peristaltic pumps provide precise delivery. They are compact

and ideal for applications in liquid chromatography, fraction collection,

fluids/buffers circulation in baths, and corrosive material movement. Bidirectional,

self-priming pumps provide outstanding flow control and flexibility for transferring

and dosing liquids. Fluid contacts only the tubing for contamination-free pumping.

Flow rates range from 0.005 to 600mL/min. Variable speed flow control and five

tubing sizes allow a wide flow range and fine resolution. Revolution of one roller

delivers a precisely measured volume specific to the tubing size and motor

speed.

Tubing can be used with fluids –62 to 260°C (–80 to 500°F). Tubing is

autoclavable for use with food, pharmaceutical, and other critical solutions.

Pumps liquid or gas, and pumping dry is not harmful to unit. The pump has a

purge/prime switch for high speed emptying/filling. It also reverses at the touch of

a switch for easy draining. Three rollers reduce flow pulsation, prevent siphoning,

and eliminate the need for check valves. There are no valves to clog or seals to

leak. Housed in a chemical-resistant ABS plastic case. For 115V operation.

Pump Type Flow Rate, mL/min. VWR Catalog # Unit List Price LabShop Price

Qty

Ultra-Low Flow 0.005 to 0.9 61161-354

Low Flow 0.03 to 8.2 54856-070

Medium Flow 0.4 to 85 54856-075

Medium-High Flow 4 to 600 $312.00

Replacement Parts for Low and Ultra-Low Flow Pumps

Tubing Set, 1/50, 1/16, 3/32, 3/16, and 1/4" I.D., with fittings/nipples 36934-126

Each $43.47 $39.12

Tubing, 1/4" I.D., with fittings/nipples 36934-128

Tubing, 1/4" I.D., without fittings/nipples 36934-124

Be sure to note flow

direction

Page 8: Pumps Equipment Description/SOPs - STLCC.edu :: … · Pumps Equipment Description/SOPs Prepared by: Bob Morrison ... Millipore, Supplies, Tubing ... (2.5L tank) 200mmHg 52

Pumps: ,Vacuum, Air/Gas ONLY, Benchtop, Analog, Buchi

STLCC-CPLS;Morrison 5/9/2011 Page 8

This diaphragm vacuum pump provides excellent operating reliability and is suitable for

use with the Büchi evaporators. All components that come in contact with solvent vapors

are made of highly resistant materials, including PTFE membranes, and glass heads.

Suction volume 1.6 m3/h and final vacuum 10 mbar, make this pump suitable for many

applications in the laboratory. Integrated switch box automatically switches the pump on or

off according to vacuum demand prolonging pump life. Optional Woulff flask may be

connected in front of pump as a vacuum reservoir to protect pump from liquids

accidentally sucked into vacuum line.

Legal Information Büchi is a registered trademark of Büchi Labortechnik AG

Buchi Vac V-500 Model

Be sure to note flow

direction arrows

Page 9: Pumps Equipment Description/SOPs - STLCC.edu :: … · Pumps Equipment Description/SOPs Prepared by: Bob Morrison ... Millipore, Supplies, Tubing ... (2.5L tank) 200mmHg 52

Pump: Peristalitic, BRDG, Benchtop, VWR/Wheaton

STLCC-CPLS;Morrison 5/9/2011 Page 9

Wheaton# VWR#

110V, 60Hz, 140W 374301 25485-003

An alternative to hand pipetting, this unit fills bottles, vials, and other containers. For

automatic operation, a variable delay 0.5 to 60 seconds can be set between doses. The

single speed peristaltic pump can dispense liquids ranging in viscosity from aqueous

solutions to medium syrups with accuracy to ±1% at mid-range. The Unispense µP

records the number of doses to form a ready reference. An audible signal at the end of

the filling cycle eliminates the need for visual monitoring.

Filling Range: 2 mm: 0.25 to 150 mL

3 mm: 1.0 to 900 mL

6 mm: 2.5 to 3000 mL

8 mm (optional): 4.0 to 5000 mL

Flow Rate: 2 mm: 0.45 mL/sec

3 mm: 2 mL/sec

6 mm: 9 mL/sec

8 mm (optional): 18 mL/sec

Delay: 0.5 to 60 seconds in automatic mode

Dimensions: 33L x 24.1W x 16.5H cm

(13 x 91/2 x 61/2")

Weight: 5 kg (11 lbs.)

Ordering Information: Unispense µP dispensers with a standard pump head (25485-003, -004) are complete

with 3mm and 6mm silicone tubing assemblies, 5 feet long. Unispense µP dispenser with a four-blade mini

pump head (25485-013) is complete with two 2mm silicone tubing assemblies, 5 feet long. For additional tubing

assemblies and tubing/dispenser accessories, see 25485-007 series.

Page 10: Pumps Equipment Description/SOPs - STLCC.edu :: … · Pumps Equipment Description/SOPs Prepared by: Bob Morrison ... Millipore, Supplies, Tubing ... (2.5L tank) 200mmHg 52

Pump: Vacuum; Bench, Air/Gas ONLY, Analog, KNF LaboPort

STLCC-CPLS;Morrison 5/9/2011 Page 10

Be sure to note flow

direction arrows

Page 11: Pumps Equipment Description/SOPs - STLCC.edu :: … · Pumps Equipment Description/SOPs Prepared by: Bob Morrison ... Millipore, Supplies, Tubing ... (2.5L tank) 200mmHg 52

Pump: Vacuum; HeavyDuty, Air/Gas ONLY Fisher, MaximaC Plus, M6C

STLCC-CPLS;Morrison 5/9/2011 Page 11

Page 12: Pumps Equipment Description/SOPs - STLCC.edu :: … · Pumps Equipment Description/SOPs Prepared by: Bob Morrison ... Millipore, Supplies, Tubing ... (2.5L tank) 200mmHg 52

Pump: Room Sized for Lab Workspaces (example, not installed at STLCC-FV)

STLCC-CPLS;Morrison 5/9/2011 Page 12

Rocker 600 Vacuum Pump

from $600

Rocker series vacuum pumps are piston-powered, oil-free pumps. The innovative

electronic, mechanical technology and human design concept make Rocker's family quiet

and low vibration, compact and light weight, clean and maintenance free, safe and

comfortable.

Quiet and low vibration: Directly motor driven without transmission mechanism and

quality rubber feet keep noise level at 52 dB, which is the lowest among equivalent

products.

Compact and light weight: Aluminum die-cast and precise construction make Rocker's

family small and compact.

Clean and maintenance free: Oil-free design makes it clean and maintenance free, we

guarantee two years or 3000 working hours of free service parts. (Excluding moisture

filter)

Safe and comfortable: Rocker's family are CE approved. It not only promises safety, but

also make operator feel comfortable.

Horse Power: 1/4HP

Port Thread: 5/16"

Pole: 4P

Net/Gross Weight: 7.6/8.6 kg

Rocker 600(110 - 120v/60Hz) Rocker 600 (220 - 240v/50Hz)

Max. Vacuum 650mmHg 650mmHg

Vacuum Speed (2.5L tank)

200mmHg 52 lpm 46 lpm

300mmHg 48 lpm 40 lpm

400mmHg 38 lpm 30 lpm

500mmHg 24 lpm 16 lpm

600mmHg 10 lpm 6 lpm

Cat Code Electrical Max. Power Consumption, Watts

Max. Current, Amps Motor Rotation Capacitor Price

Add Quantity

167600-11 110 - 120V/60Hz 210 1.9 1700 RPM

16uf/250v