proven technology for individual valve solutions worldwidetrunnion mounted ball valves api 6d, 6dss...
TRANSCRIPT
Proven technology for individual valve solutions worldwide
Page 3
GWC ITALIA MANAGEMENT TEAM
Roberto Bartolena Chairman
Over 50 years experience
Paolo Palella Chief Executive Officer
Over 30 years experience
DB Meador Chief Executive Officer USA
Over 30 years experience
Claudio Conti Sales and Marketing VP
Over 40 years experience
Nicola Rossi Chief Financial Officer
Over 30 years experience
Page 4
GWC ITALIA PRODUCTS
GWC ITALIA products’ offer includes:
Trunnion Mounted Ball Valves API
6D, 6DSS & 6A (PSL4)
Split Body, Top Entry, Welded
Body, Two Balls One Body DBBV
(Soft and Metal Seated)
Subsea, Cryogenic & High Temp.
Pipeline Gate and Check Valves
Gate, Globe and Check Valves
Butterfly Valves
Page 5
GWC WORLDWIDE NETWORK
North America
GWC ITALIA - USA HQ
Domestic Manufacturing
and USA Headquarters
(Bakersfield, CA)
Middle East
GWC Dubai Middle East Sale Office
(Dubai, UAE)
ASIA
GWC Shanghai
and Binhai
Manufacturing and
Asia Sales Office
(China)
EUROPE
GWC Italia S.p.A.
Italian Manufacturing
and Group Headquarters
(Trezzo sull’adda, Italy)
GWC Worldwide Network counts also on Sales Team, agents and representatives located in strategic markets (e.g.Texas, South America, etc..)
Page 8
GWC ITALIA (ITALY PLANT) – PRODUCTION RANGE
API Licenses:
API 6D
API 6DSS
API 6A-PSL4
Size Range: 1” to 56”
Pressure Range: ASME 150#-2500# / API 2000-15000
Service Type:
Standard
NACE
High Temp. (above300°C/572°F )
Cryogenic (down to -320°F)
Sub sea (shallow & deep water)
Underground
Corrosive
MODEL FF & GG
SIDE ENTRY BOLTED BODY
MODEL FW & GW
SIDE ENTRY WELDED BODY
MODEL FT & GT
TOP ENTRY BOLTED BONNET
MODEL FC & GC
COMPACT BODY (TWIN BALLS)
Page 11
MODEL FF & GG
DOMESTIC SIDE ENTRY BOLTED BODY
API Licenses:
API 6D
Size Range: 2” to 36”
Pressure Range: ASME 150#-2500#
Service Type:
Standard
NACE
High Temp. (above300°C/572°F )
Underground
Corrosive
GWC ITALIA (USA PLANT) – PRODUCTION RANGE
Page 13
API Licenses:
API 6D
API 6A-PSL4
Size Range: 1” to 36”
Pressure Range: ASME 150#-2500# / API 2000-10000
Service Type:
Standard
NACE
High Temp. (above 300°C/572°F)
Corrosive
GWC ITALIA (CHINA PLANT) – PRODUCTION RANGE
MODEL FF & GG
SIDE ENTRY TRUNNION
MOUNTED BOLTED BODY
MODEL F & G
TWO PIECES SPLIT BODY
TRUNNION MOUNTED
MODEL B & C
TWO PIECES SPLIT BODY
FLANGED FLOATING
MODEL A
END ENTRY ONE PIECE
FLANGED FLOATING
Page 14
GWC ITALIA, USA AND CHINA API LICENSE CERT.
Page 15
GWC ITALIA – PERFORMANCE, INTEGRITY, DESIGN (1/3)
GWC Italia have developed a standard range of Trunnion
mounted ball valves which have been tested and certified
to the following:
ISO 15848-1: “Industrial Valves - Measurement, Test
and Qualification Procedures for Fugitive Emissions
API 6FA: ”Specification for Fire Testing of Valves”
API 607: ” Fire Test for Quarter-turn Valves and Valves
Equipped with Nonmetallic Seats
SIL: Safety Integrity Level
ATEX: 94/9/EC
PED: Pressure Equipment Directive
In addition to these we have also carry out special
application tests for example:
Cryogenic: Minus -328 Deg. F
High temperature: +572 Deg. F
Tests have been executed using the latest, state of the art equipment in our
testing facilities located at our Italian headquarters
Bunker (Italy Plant)
Testing (Italy Plant)
Testing (Italy Plant)
Page 16
GWC ITALIA – PERFORMANCE, INTEGRITY, DESIGN (2/3)
SIL CERTIFIED PED & ATEX
SIL (Safety Integrity Level) identifies all the hazards
of a process and the risks inherently involved to
determine if that risk is tolerable/acceptable.There are
4 levels of SIL where the higher the level, the greater
the impact a failure will have. SIL 4 has the highest
level of safety – Level 1 the lowest. Selecting the
right SIL and valves is critical
GWC Italia’s range of standard Side entry, Top Entry
and Welded Body valves are all SIL 3 certified
giving our customers the
knowledge and
confidence that they are
installing valves built on
Performance, Integrity,
Design
GWC Italia’s complete range of Side entry ,Top
Entry and Weld body ball valves are certified to:
ATEX – 94/9/EC
This covers the manufacture and sale of Ex
Equipment and requires all equipment with a potential
ignition source (electrical and non-electrical) to
comply with 94/9/EC. This is required particularly for
actuated systems to maintain integrity
PED
GWC Italia valves are fully certified to
Annex III ( Module H) of Directive
97/23/EEC
Page 17
GWC ITALIA – PERFORMANCE, INTEGRITY, DESIGN (3/3)
CRYOGENIC FUGITIVE EMISSION
To meet the increasing demand for high performance
cryogenic ball valves for LNG (liquefied natural gas)
service GWC has developed a range of valves to
meet these demands delivering long term
Performance, Integrity, Design. Typical LNG Plants: Liquefaction Loading Unloading Storage Re-gasification
GWC Italia’s CRYO valves may be used in many other process involving cryogenic fluids, or exposure to extreme low-temperature condition -58°F to -328°F.
To meet the growing demands for high integrity, low
emission service valves, GWC has addressed this by
developing a standard range of Trunnion mounted
ball valves certified to the latest ISO 15848
standard - Class B / Endurance level C01.
The tests have been
carried out and
qualified as per EN
473 and witnessed by
Independent Third
party inspection
Agencies.