7/25/2019 Protective Tile & Stone Sealer

1/2

ARDEX ENDURA (INDIA) PRIVATE LIMITED

Corporate Office & Regd. Office:

Unit No. 406 & 407, Brigade Rubix,No. 20, HMT Campus, Yeshwanthapur Hobli,

Bengaluru - 560013. Karnataka, INDIA.

CIN No: U24233KA1997PTC022383

Tel: +91 80 66746500

Fax: +91 80 66746540

Email: customercare@ardexendura.com

Visit us: www.ardexendura.com

PROTECTIVE

TILE & STONE SEALERTemporary Protective Sealer

Features

Protects tiles during grouting

Cleans off afterwards

Protects against Cement based coloured Grout / Epoxystaining

Protects the porous tiles / stones from staining by forming

a temporary protective layer

7/25/2019 Protective Tile & Stone Sealer

2/2

PROTECTIVE

TILE & STONE SEALERTemporary Protective Sealer

DESCRIPTIONProtective Tile & Stone Sealer is a temporary

protective coating for tiled surface. It protects

glazed and unglazed tile surface against

staining by cement, coloured grout (includes

ready mixed, cement based and resin based)

etc. during grouting and other bonding

operation. Suitable for use on glazed &

unglazed ceramic tile, mosaics, terracotta,

marble & terrazzo.

RECOMMENDED SURFACES

Ceramic tiles

Vitrified tiles

Natural stones

Clay tiles

Sandstone

Terrazzo

NOTE:= Suitable

INSTRUCTIONS FOR USE

1. Ensure the surface is clean, dry and free

from any contamination.

2. Using clean fluff free cloth/soft bristle

brush apply one coat of Protective Tile& Stone Sealer to the tile rubbing well

to the tile surface and ensuring complete

coverage is obtained. Allow about

30 minutes to dry.

3. Apply second coat and allow it to dry

completely.

4. Avoid application of sealer to ungrouted

tile joints.

5. Joints are filled with ARDEX ENDURA

GROUT. Excess GROUT are removed

by normal way.

6. When grout has set, remove any residual

sealer by washing off with clean water &scouring pad.

LIMITATION

Do not apply grout when the protective

sealer is not completely dry.

Do not use sharp metal tools to apply grout

as it may damage the sealer.

VOC Content 168.67 g/L

COVERAGE ESTIMATES

Pack size Coverage

500 ml & 5 Litres Approximately 515 mper litre

Depending on the

porosity of the

surface

STORAGE AND SHELF LIFEProtective Tile & Stone Sealer has a shelf life

of 12 months in original unopened container.

Store in dry conditions between 5C and 30C,protect from direct sunlight.

PRECAUTIONS

Keep out of reach of children. Wear suitable

protective clothing, gloves and eyes/face

protection. After contact with skin, wash

immediately with plenty of clean water. In case

of contact with eyes rinse immediately with

plenty of clean water and seek medical advice.

DISPOSAL/SPILLAGE

Spillage of any of the Protective Tile & StoneSealer product should be removed with plenty

of water. Disposal of such product or empty

packaging should be in accordance with local

waste disposal authority regulations.

For further information please refer to the

Material Safety Data Sheet.

CONDITIONS OF SALE

Sold subject to the Company's conditions

of sale which are available on request.

NOTE

The information supplied in this datasheet

is based upon extensive experience and is

given in good faith in order to help you.

Our Company policy is one of continuous

Research and Development; we therefore

reserve the right to update this information

at any time without prior notice. We also

guarantee the consistent high quality of our

products; however as we have no control over

site conditions or the execution of the work,

we accept no liability for any loss or damage

which may arise as a result thereof.

02/15