Teachers Station Media Instructions

Project from the Computer:

1) Turn the projector on by pressing the projector power button on the remote

2) It takes some time for the projector to warm up, so wait until you see the blue screen being projected.

3) Turn on the computer and wait for the switcher to detect the signal. It will automatically route the computer to the projector unless a laptop is connected as well.

4) If the computer screen isn’t being projected, press the “Comp 1” buttong on the remote.

Project from the Laptop:

1) Turn the projector on by pressing the projector power button on the remote.

2) It takes some time for the projector to warm up, so wait until you see the blue screen being pro-jected.

3) Connect your laptop to the VGA cable. Keep in mind : if you are using a Mac, we do not provide the VGA adapter.

4) The switcher will autodetect your laptop and route it to the proector.

5) Turn on your laptop, and wait for the image to show up on the projected screen.

6) If the image doesn’t show up, press the “Comp 1” button on the remote.

Project from the VCR:

1) Turn the projector on by pressing the projector power button on the remote

2) It takes some time for the projector to warm up, so wait until you see the blue screen being projected.

3) Turn on the VCR/DVD Player.

3) Press the “Video” button on the remote. Use the buttons on the VCR to control you media.

If you experience technical difficulties, please contact the Audiovisual Services Manager at

212-647-7793

w14

labs

Projector Power

Computer

Video

Teachers Station Media Instructions

Project from the Computer:

1) Turn the projector on by pressing the projector power button on the remote.

2) It takes some time for the projector to warm up, so wait until you see the blue screen being projected.

3) Set the switch box dial to “A.”

4) Turn on the computer.

5) If the computer screen is not being projected, press the “Comp 1” button on the remote.

Project from the VCR:

1) Turn the projector on by pressing the projector power button on the remote

2) It takes some time for the projector to warm up, so wait until you see the blue screen being projected.

3) Turn on the VCR/DVD Player.

3) Press the “Video” button on the remote. Use the buttons on the VCR to control you media.

Project from the Laptop:

1) Turn the projector on by pressing the projec-tor power button on the remote.

2) It takes some time for the projector to warm up, so wait until you see the blue screen being projected.

3) Connect your laptop to the VGA cable. Keep in mind : if you are using a Mac, we do not provide the VGA adapter.

4) Set the switch box dial to “B”.

5) Turn on your laptop, and wait for the image to show up on the projected screen.

6) If the image doesn’t show up, press the “Comp 1” button on the remote.

If you experience technical difficulties, please contact the Audiovisual Services Manager at

212-647-7793

w14

labs

Projector Power

Computer

Video

Teachers Station Media Instructions

Project from the Computer:

1) Turn the projector on by pressing the projec-tor power button on the remote.

2) It takes some time for the projector to warm up, so wait until you see the blue screen being projected.

3) Set the switch box dial to “A.”

4) Turn on the computer.

5) If the computer screen is not being projected, press the “Comp 1” button on the remote.

Project from the VCR:

1) Turn the projector on by pressing the projector power button on the remote.

2) It takes some time for the projector to warm up, so wait until you see the blue screen being projected.

3) Once the projector has warmed up, turn on the VCR/DVD Player.

3) Press the “Video” button on the remote. Use the buttons on the VCR to control your media.

Project from the Laptop:

1) Turn the projector on by pressing the projec-tor power button on the remote.

2) It takes some time for the projector to warm up, so wait until you see the blue screen being projected.

3) Connect your laptop to the VGA cable. Keep in mind : if you are using a Mac, we do not provide the VGA adapter.

4) Set the switch box dial to “B”.

5) Turn on your laptop, and wait for the image to show up on the projected screen.

6) If the image doesn’t show up, press the “Comp 1” button on the remote.

Projector Power

Computer

Video

w14

labs

If you experience technical difficulties, please contact the Audiovisual Services Manager at

212-647-7793.

Teachers Station Media Instructions

Project from the Computer:

1) Turn the projector on by pressing the projector power button on the remote

2) It takes some time for the projector to warm up, so wait until you see the blue screen being projected.

3) Turn on the computer and wait for the switcher to detect the signal. It will automatically route the computer to the projector unless a laptop is connected as well.

4) If the computer screen isn’t being projected, press the “Comp 1” buttong on the remote.

Project from the Laptop:

1) Turn the projector on by pressing the projector power button on the remote.

2) It takes some time for the projector to warm up, so wait until you see the blue screen being pro-jected.

3) Connect your laptop to the VGA cable. Keep in mind : if you are using a Mac, we do not provide the VGA adapter.

4) The switcher will autodetect your laptop and route it to the proector.

5) Turn on your laptop, and wait for the image to show up on the projected screen.

6) If the image doesn’t show up, press the “Comp 1” button on the remote.

Project from the VCR:

1) Turn the projector on by pressing the projector power button on the remote

2) It takes some time for the projector to warm up, so wait until you see the blue screen being projected.

3) Turn on the VCR/DVD Player.

3) Press the “Video” button on the remote. Use the buttons on the VCR to control you media.

Projector Power

Computer

Video

If you experience technical difficulties, please contact the Audiovisual Services Manager at

212-647-7793.

w14

labs

Teachers Station Media Instructions

Project from the Computer:

1) Turn the projector on by pressing the projector power button on the remote.

2) It takes some time for the projector to warm up, so wait until you see the blue screen being projected.

3) Set the switch box dial to “A.”

4) Turn on the computer.

5) If the computer screen is not being projected, press the “Comp 1” button on the remote.

Project from the Laptop:

1) Turn the projector on by pressing the projector power button on the remote.

2) It takes some time for the projector to warm up, so wait until you see the blue screen being projected.

3) Connect your laptop to the VGA cable. Keep in mind : if you are using a Mac, we do not provide the VGA adapter.

4) Set the switch box dial to “B”.

5) Turn on your laptop, and wait for the image to show up on the projected screen.

6) If the image doesn’t show up, press the “Comp 1” button on the remote.

Project from the VCR:

1) Turn the projector on by pressing the projector power button on the remote.

2) It takes some time for the projector to warm up, so wait until you see the blue screen being projected.

3) Once the projector has warmed up, turn on the VCR/DVD Player.

3) Press the “Video” button on the remote. Use the buttons on the VCR to control your media.

Projector Power

Computer

Video

w14

labs

If you experience technical difficulties, please contact the Audiovisual Services Manager at

212-647-7793.

Projector Power

Computer

Video

w14

labs

If you experience technical difficulties, please contact the Audiovisual Services Manager at

212-647-7793.

Teachers Station Media Instructions

Project from the Computer:

1) Turn the projector on by pressing the pro-jector power button on the remote.

2) It takes some time for the projector to warm up, so wait until you see the blue screen being projected.

3) Set the switch box dial to “A”.

4) Turn on the computer.

5) If the computer screen isn’t being pro-jected, press the “Comp 1” button on the remote.

Project from the Laptop:

1) Turn the projector on by pressing the projector power button on the remote

2) It takes some time for the projector to warm up, so wait until you see the blue screen being projected.

3) Connect your laptop to the VGA cable. Keep in mind : if you are using a Mac, we do not provide the VGA adapter.

4) Set the switch box dial to “B”

5) Turn on your laptop, and wait for the image to show up on the projected screen.

6) If the image doesn’t show up, press the “Comp 1” button on the remote.

Project from the VCR:

1) Turn the projector on by pressing the projec-tor power button on the remote.

2) It takes some time for the projector to warm up, so wait until you see the blue screen being projected.

3) Once the projector has warmed up, turn on the VCR/DVD Player.

3) Press the “Video” button on the remote. Use the buttons on the VCR to control your media.