process automation - festo.com · process automation product overview total field pneumatic control...
TRANSCRIPT
Process automationProduct overview
Total Field Pneumatic Control Solution
www.festo.com
11/1/2012 2:28:38 PM11/1/2012 2:28:38 PM11/1/2012 2:28:38 PM11/1/2012 2:28:38 PM11/1/2012 2:28:38 PM11/1/2012 2:28:38 PM11/1/2012 2:28:38 PM11/1/2012 2:28:38 PM11/1/2012 2:28:38 PM11/1/2012 2:28:38 PM
Festo - The automation company
Festo is a leading industrial automation supplier with main emphasis on pneumatic and electromechanical systems. Festo serves 300,000 customers worldwide and invests 8.5% of its turnover in Research & Development.
With 59 independent national companies, more than 250 subsidiaries and a close knit service network in 176 countries worldwide, Festo strives to ensure that customers can obtain components, subsystems and systems for automation in next to no time.
Product range for process technology and process engineering
Festo is keeping abreast with the fast pace of technological progress by continually expanding the range of products for this industry segment.
In addition, the functionality of products has been adapted to particular functions of the process technology and process engineering such as explosion protection, corrosion resistant, etc.
Connection to third party products
With regards to integrating Festo products to third party products, flexible components of Festo facilitates the connection to most of the industrial standard.
The crucial factor is the system concept which integrates, complements and/or improves the existing functionality of a system with new component.
Quality assurance
As an automation specialist in production industry, Festo has an enormous potential of know-how experience. Furthermore, all products – components, subsystems, etc; are tested under the most extreme conditions and technically optimized.
Worldwide industry segment advice
Festo technical consultants, engineers and experts ensure that high quality yardstick synonymous with Festo is implemented to optimum effect worldwide. Our international presence ensures maximum availability of products and our proverbial quality of services.
Festo – the industry segment partner
Pa.Prod.Overview.indd 2 11/1/2012 2:28:42 PM
For more than 8 decades, Festo develops products catering for digital and analogue automation in the field of pneumatic automation.
Initiated as a supplier for automated components – actuated valves, tubings, air preparation units, various pneumatic connections to solenoid valves; Festo successfully integrated solenoid valves with electrical input/output modules and employs latest fieldbus technology for communication. User thereby gets the benefit of optimized investment – reduced cable to the field, associate installation/infrastructure cost, etc.
Furthermore, the ability to incorporate standard diagnostic features of solenoid valves will assist in the accurate identification of problem, leading to more effective maintenance activities.
With such comprehensive range of products, engineering competencies and strong experiences in pneumatic design; Festo is in a unique position to be your fieldbus automation partners.
Automation solution in process industry
“Total Field Pneumatic Control Solution Supplier”
Control Cabinet (Normal/SS)
Air preparation unit
Automatedon/off valve
Dig
ital O
utpu
tD
igita
l Inp
ut
Remote I/O with valve terminals
Analogue Input
Pa.Prod.Overview.indd 3 11/1/2012 2:28:43 PM
Comparison of pneumatics, electric and hydraulics
Pneumatics Electric Hydraulic
Energy storage by mean of air tanks and compressed air bottles
with batteries, although only in small quantities
with the helps of gases
Energy transmission
easily up to 1,000m(pressure drop is possible)
unlimited, but voltage drop up to 100m (pressure drop)
Leakage no disadvantages (minimal energy loss)
danger of exposed cables contamination
Environmental conditions
explosion-proof, temperature insensitive, ice hazard with non dried compressed air in winter
explosion hazard in certain areas, temperature insen-sitive, heating required for outdoor use
sensitive to temperature fluctuations, fire risk in the event of leakage
Handling simple only with specialised technical knowledge
more difficult than with pneumatics, return piping is necessary
Generation of linear movements
simple with excellent adjustable speed
associated with major expenditure, gear units
simple with cylinder, good adjustable
Forces overload-proof, no energy consumption for retention forces
not overload-proof, impaired efficiency as a result of downstream mechanical elements
overload-proof, permanent energy consumption for retention forces
Pa.Prod.Overview.indd 4 11/1/2012 2:28:46 PM
Standard in practice
In ensuring the interchangeable of tremendous numbers of process automation products, which vary greatly in construction, material, size, service life, quality and price; the standards and guidelines has been drawn up over a period of time. These standards or guidelines refer to the mechanical interfaces and are intended to facilitate the assembly of a complete control unit (process valve/ actuator/ end position sensing device).
Service reliability
Worldwide support
By locating the engineering centre in each region, Festo brings engineering know-how and experts closer to the customers. In addition, this also allows each engineering centre to tap on each other experience in bringing customers more advance solutions
Global collaboration
In this globalization world, seeing the world as one customer and working on international level has become inevitable. With its global existence, Festo is able to provide a competitive advantage support worldwide.
These interfaces are:ISO 5211/5210 – process • valve and process actuatorDIN 3337 – process valve and • process actuatorVDI/VDE 3845, NAMUR – • actuator, end position sensing deviceVDI/VDE 3845, NAMUR – • actuator, solenoid valveATEX explosion protection•
Engineering tools
“Delivering value” to Festo means more than just being a partner, but to offer competitive advantage support. The engineering tools created are used in assisting the engineers in dimensioning and simulating. This is to ensure the reliability from the start.
Commissioning
Ready, tested control systems are installed by service personnel directly, where Festo will be on site to ensure the system is up and run.
In addition, Festo also offers a range of automation related training courses.
Pa.Prod.Overview.indd 5 11/1/2012 2:28:47 PM
ActuatorSemi-rotary actuator – DFPB
Flange hole patterns to ISO 5211•Clockwise / counter-clockwise rotation is possible (valve interface on both sides)•Assembly interface to VDI/VDE 3845•Rack and pinion mechanism•
Function Ambient temperature[°C]
Size Torque at 6 bar[Nm]
Swivel angle[°]
Double-acting -20...80Double-acting -20...80 10...1,050 7...945 0...90
Single-acting -20...80Single-acting -20...80 105...5,205 1...882 0...90
Semi-rotary actuator – DAPS
Flange hole patterns to ISO 5211•Assembly interface to VDI/VDE 3845•Namur port pattern for solenoid valves to VDI/VDE 3845•Scotch-yoke mechanism, twin piston balanced pinion force•Available variant: Epoxy coating, PTFE coating and low temperature (-50°C)•
Function Ambient temperature[°C]
Size Torque at 5-6 bar[Nm]
Swivel angle[°]
Double-acting -20...80Double-acting -20...80 8...8,000 8...8,000 0...90
Single-acting -20...80Single-acting -20...80 15...4,000 15...4,000 0...90
Manual semi-rotary actuator – DAPS-MW
Flange hole patterns to ISO 5211•Namur port pattern for solenoid valves to VDI/VDE 3845•Scotch-yoke mechanism•Direct hand wheel actuating on piston without need of gearbox•
Function Ambient temperature[°C]
Size Torque at 6 bar[Nm]
Swivel angle[°]
Double-acting -20...80Double-acting -20...80 15...1,920 15...1,920 0...90
Single-acting -20...80Single-acting -20...80 15...960 15...960 0...90
Semi-rotary actuator – DRD/DRE
Flange hole patterns to ISO 5211•Assembly interface to VDI/VDE 3845•Namur port pattern for solenoid valve to VDI/VDE 3845•Available variant: Spring force (closing/opening), adjustable end-position limitation and corrosion resistant version, •swivel angle up to 180°
Function Ambient temperature[°C]
Size Torque[Nm]
Swivel angle[°]
Double-acting -20...80Double-acting -20...80 1...880 7.44...8,814 0...90
Single-acting -20...80Single-acting -20...80 2...880 2...880 0...90
Linear actuator – DLP
Positioning sensing•Integrated Namur working ports•Piston rod with male thread•Namur port pattern for solenoid valves to VDI/VDE 3845•Mounting hole pattern to ISO 5211•
Function Operating pressure[bar]
Piston Ø[mm]
Stroke length[mm]
Force[N]
Double-acting 6Double-acting 6 80...320 40...2,000 2,800...48,255
Controlled linear actuator – DFPI
Integrated displacement encoder, valve manifold and positioner•Robust design for harsh environment•Fast commissioning•Use to control gate valves and plug valves in outdoor•Special strokes on request•
Function Operating pressure[bar]
Piston Ø[mm]
Stroke length[mm]
Force[N]
Double-acting 3...8Double-acting 3...8 100...320 40...990 4,417...48,255
SS Cylinder – DAIG
Compact stainless steel cylinder•Corrosion resistance to harsh environment•Use in mining industry•Accessories: bellow (to protect piston rod seal)•
Function Operating pressure[bar]
Piston Ø[mm]
Stroke length[mm]
Force[N]
Double-acting 3...8Double-acting 3...8 320 40...990 46,380...48,250
Safety shutter AEVU-SA
Safety shutter actuator with integrated inert gas pipe clamping•Prevent human interference in safety critical environment•Mechanical spring to extend•Use in inert gas application•
Function Operating pressure[bar]
Piston Ø[mm]
Stroke length[mm]
Piston cover
Safety shutter 6Safety shutter 6 63...70 20...25 Normally extended
Knocker – KNO
Pneumatic knocker•High impact force•Maintenance free•Easy mounting•Use for silos, hoppers and bulk goods movement•Operating pressure: 2...8 bar•Piston Ø: 40...80mm•
3 position actuator
Use in filling and dozing application•For rough and fine dozing without the use of complex equipment•Digital control, no analogue required•
Valves / Process valves
Butterfly valve
Centric design•Standard double / single acting actuator•Face-to-face dimension in accordance with EN 558-1•
Seal principle Direction of flow Ambient temperature[°C]
Temperature of medium [°C]
Nominal pressure
Soft Reversible -20...80 -23...82 (NBR)-40...135 (FDM)
PN10
Ball valve
Full port ball valve•Combination of a pneumatic quarter turn actuator and a ball valve•Combination comes in fail close or fail last ball valve•Operating medium: compressed air, water neutral gases, neutral fluids, vacuum•
Valve seal Connection size Temperature rangeConnection size Temperature range[°C]
Torque[Nm]
Operating pressure[bar]
Soft PTFE ¼...4 -20...150 4...107.8 25...40
Angle seat valve VZXF – 2/2-way valve
Pneumatic controlled 2/2-way valve•Do not require different pressure between inlet and outlet•Suitable for steam, high viscosity up to 600mm• 2/s, dirty media
Max viscosity[mm2/s]
Connection size (G or NPT)
Material Flow rate[Kv]
Operating pressure[bar]
600 ½...2 - Brass- Stainless steel 304
2.8...47.5 4...10
Diaphragm valve – VZWP
Simple sturdy design•High working pressure using small solenoid coils•Normally close (N.C.) guarantees valve closed on voltage failure•Can be operated with air, neutral gas and neutral liquid•
Design Connection size (G) Variant sealConnection size (G) Variant seal Flow rate[Kv]
Operating pressure[bar]
Piloted piston poppet ¼...1Piloted piston poppet ¼...1 NBR (Standard)FPM
1.5...11.5 0.5...400.5...40
Diaphragm valve – VZWM
Solenoid activated diaphragm control valve•Various voltage 24 V DC, 110/230 V AC•
Nominal diameter[DN]
Connection size (G) MaterialConnection size (G) Material Flow rate[l/min]
Operating pressure[bar]
8...50 ¼...G2 - Brass- Stainless steel
1,400...31,000 101,400...31,000 10
Operated 2/2-way valve VZWD
High pressure rating•Direct solenoid activation•Use for small flow rates and/or high pressure application•
Max. viscosity[mm2/s]
Connection size MaterialConnection size Material Flow rate[Kv]
Operating pressure[bar]
22 ¹/8...¼ - Brass - Stainless steel
0.06...0.4 0...90
Forced pilot operated valve – VZWF
Forced lifted of the valve diaphragm•Different pressure is not required•2/2-way normally closed•Suitable for cooling, filling, vacuum, liquid gas, bottling systems•
Variant seal Connection size (G) MaterialConnection size (G) Material Flow rate[Kv]
Operating pressure[bar]
NBR (standard), EPDM, FPM
¼...2 - Brass- Stainless steel
1.8...28 0...10
Pulse valve – VZWE
High flow rate•Fast switching cycle•Suitable for clean bag house filters and anti pollutant equipment•
Pressure[bar]
Connection size (G) MaterialConnection size (G) Material Nominal size[mm]
Operating voltage[V]
0.35...8 ³/4...3 Cast aluminium 20...76Cast aluminium 20...76 24 DC110, 220 AC
Manual ball valve – CRQH
Pipe thread in accordance to ANSI B2.1•Blow out proof stem / full port•Stainless steel ASIS 316 (DIN 14408)•
Function Connection (NPT) MaterialConnection (NPT) Material Flow rate[Gv]
Nominal pressure[bar]
2pc design ¼...4 S/S316 bodyPTFE seal
6.6...780 up to 40
3pc design
Solenoid valves
Pilot valve – VOFD (Namur)
Sturdy design and high resistance to corrosion make these valves suitable for outdoor use•Port pattern to Namur for direct mounting of a drive as well as G and NPT threaded connections•Suitable for use in safety related systems up to and including SIL 4 to IEC 61508; and protection class IP65•Duty cycle: 100%•
Constructional design Flow rateConstructional design Flow rate[l/min]
Ambient temperature[°C]
Pneumatic connection (G, NPT, Namur)
Operating pressure[bar]
Poppet 450 10...60 ¼ 2...8
Pilot valve – VOFC (Namur)
Use within chemical and petrochemical systems – frequently used as pilot valves for flaps and drives•The surface of the valve housing is treated with hard Ematal•Port pattern to Namur for direct mounting of a drive as well as G and NPT threaded connection•Suitable for use in safety related systems up to and including SIL 4 to IEC 61508; and protection class IP65•Duty cycle: 100%•
Constructional design Flow rateConstructional design Flow rate[l/min]
Ambient temperature[°C]
Pneumatic connection (G, NPT, Namur)
Operating pressure[bar]
Poppet / Spool 600...3,000Poppet / Spool 600...3,000 -25...60 ¼,½ 2...8
Solenoid valve – VSNB (Namur)
3/2-way or 5/2-way mono or bistable•CNOMO interface for simple connection to the pilot control•Port pattern to Namur – VDI/VDE 3845•
Constructional design Flow rateConstructional design Flow rate[l/min]
Ambient temperature[°C]
Operating voltage[V]
Operating pressure[bar]
Piston spool 950 -10...60 24 DC110, 230 AC
2.5...8
Solenoid valve NVF3 (Namur)
3/2-way or 5/2-way mono or bistable•Port pattern to Namur – compliance to VDI/VDE 3845•ATEX symbol: II 2 G c T6, II 2 D c 40°C, II 2 G EEx ia IIc T6, II 2 D Ex iaD IP65 T80°C•
Valve function Flow rateValve function Flow rate[l/min]
Ambient temperature[°C]
Operating voltage[V]
Operating pressure[bar]
3/2-way or 5/2-way, single solenoid
900 -5...40 12, 24, 42, 48 DC24, 42, 48, 110, 230, 240 AC
2...10
Valve terminals
Valve terminal – CPV
Ready to install and tested unit•Ideal for decentralised system structures•Optimized assembly for control cabinets•Pneumatic multiple connector plate – fast assembly without the need to replace connected tubing•Up to sixteen 2/2-way or 3/2-way valve per valve terminal – thanks to two-valve function in each valve slide•
Type Valve width[mm]
Flow rate[l/min]
Operating pressure[bar]
Ambient temperature[°C]
CPV10 10 400 -0.9...10 -5...50
CPV14 14 800
CPV18 18 1,600
Valve terminal – MPA/MPA-F/MPA-L
Slim high performance valve in sturdy metal housing•With multi-pin plug, AS-interface, CPI, fieldbus connection and control block•Expandable to up to 128 solenoid coils•The LEDs on the valves and diagnostics via fieldbus allows fast troubleshooting•Up to sixteen 2/2-way or 3/2-way valve per valve terminal – thanks to two-valve function in each valve slide•Vertical shut-off module – individual valve could be replaced without shutting down the whole manifold•
Ambient temperature[°C]
Flow rate[l/min]
Valve width[mm]
Operating voltage[V]
Operating pressure[bar]
-5...50 up to 700 10...21 24 DC -0.9...10
Valve terminal – VTSA/VTSA-F
High performance valves in sturdy metal housing•Standardised from multi-pin plug to the fieldbus connection and control block•Expandable to up to 32 solenoid coils•Fast troubleshooting: LEDs on the valves and diagnostics via fieldbus•Vertical shut-off module – individual valve could be replaced without shutting down the whole manifold•Up to sixteen 2/2-way or 3/2-way valve per valve terminal – thanks to two-valve function in each valve slide•Available in NPT thread•
Duty cycle[%]
Flow rate[l/min]
Valve width[mm]
Operating voltage[V]
Operating pressure[bar]
100 400...2,900 18...52 24 DC110 AC
-0.9...10
Valve terminal CDVI
Valve technology with a high resistant polymer materials•Development with practical consideration in mind – hygienic, corrosion resistant and easy to clean•Expandable to up to 24 solenoid coils•
Duty cycle[%]
Flow rate[l/min]
Valve width[mm]
Valve position Operating pressureValve position Operating pressure[bar]
100 300...650 24 4...16 -0.9...10
Valve terminal CPV Ex-i for explosion areas
Up to sixteen 2/2-way or 3/2-way valves per valve terminal – thanks to two-valve function in each slide•Intrinsically safe valve terminal design to ATEX Category 2 (Zone1)•Extremely robust thanks to the metal valve design•Pneumatic multiple connector plate – fast replacement of the valve block without the need to replace the existing tub-•ing connectionValve assembly optimized for control cabinets•Available in NPT thread•
Duty cycle[%]
Flow rate[l/min]
Valve width[mm]
Operating voltage[V]
Ambient temperature[°C]
100 400 10 24 DC -5...50
Valve terminal – VTUB
Universal from the individual valve up to the multi-pin plug•Selectable valve functions: 3/2-way and 4/2-way•Expandible to up to 16 valve positions on one valve terminal, max. 24 solenoid coil•Sturdy polymer housing and metal manifold rail•
Valve width[mm]
Flow rate[l/min]
Ambient temperature[°C]
Operating voltage[V]
Operating pressure[bar]
20 up to 1,000 -5...50 12, 24 DC24, 110, 230 AC
-0.9...8
Modular electrical terminal – CPX
Electrical input/output modules, bus nodes and pneumatic interface/electronic module for valves•Extensive range of functions as connection options for the electrical modules•Open to all fieldbus protocols and ethernet•The extensive selection of LEDs on the bus node and on all I/O modules allow fast troubleshooting•
I/O modulesCP interfaceMulti axis interface
Max. inputs capacity[byte]
Max. outputs capacity[byte]
Operating voltage[V]
Protection class
Up to 9 64 64 24 DC IP65/IP67/IP20
Handheld – CPX-MMI
Fast access to the diagnostic history and the modules with diagnostic messaging•Small, convenient commissioning and service device for the CPX terminal•Display and modified the current status of the inputs and outputs of a module•Advance commissioning through the monitoring/forcing of inputs and outputs without fieldbus master/PLC•
Data interface Protection class ATEX category Operating voltageData interface Protection class ATEX category Operating voltageData interface Protection class ATEX category Operating voltageData interface Protection class ATEX category Operating voltage[V]
Time stamp
RS 232 interface, 57.6 kBaud, M12 socket, 4 pins
IP65 II 3 G, II 3 D 18...30 DC Display last 40 error occurrences
Installation system – CPI
Complete concept for decentralised system structure•Four CP strings up to 10m in length (radius) facilitate optimum decentralization•Max. 32 inputs and 32 outputs valves per string•Display of the input status of each input signal via an assigned LED•
No. of output Protection class Power supplyNo. of output Protection class Power supplyNo. of output Protection class Power supply[24 V DC]
Operating voltage[mA]
Operating voltage for sensors
16...32 IP65 CP connection typically 75CP connection typically 75 24
Sensors
Sensor box DAPZ
Drive interface to VDI/VDE 3845 (Namur)•Simple and quick assembly and connection•Integration solenoid valve actuation•AS-interface is available•
Operating voltage[V]
Max. current output [mA]
Sensing type Ambient temperatureSensing type Ambient temperature[°C]
Mechanical 0...250 DC/AC up to 16,000 - Basic version0...250 DC/AC up to 16,000 - Basic version0...250 DC/AC up to 16,000 - Basic version- Explosion proof
-20...85
Contactless 10...30 – - Basic version
Sensor box SRBF
Limit switch attachment with two mechanical switches in painted aluminium housing•With 8-pin terminal block and yellow/red visual indicator•Mounting standard: ISO 5211, DIN EN 60947-5-1•
Operating voltage[V]
Max. switching capacity
Measuring principle Ambient temperatureMeasuring principle Ambient temperature[°C]
Direct voltage DC 0...24Direct voltage DC 0...24 36 W For mechanical, electrical proximity sensors
-25...80
Alternating voltage AC 0...250Alternating voltage AC 0...250 1,700VA
Analogue/binary sensor box – SRAP/SRBP
The analogue version:•Reports the open/closed position of the semi-rotary actuator, detects the entire swivel range and reports this back •to the controller via the analogue signalThe integrated sensors are based on proven 2D Hall Technology•
The binary version:•Position sensor for semi-rotary actuator and it reports the open and closed position of the actuator•Sensors are based on reed technology•
Drive interface to VDI/VDE 3845 (Namur)•
Output[mA]
Operating voltage[V]
Adjust angle[°]
Ambient temperature[°C]
Analogue 4...20 15...30 0...270 -20...80
Binary up to 28.8 DC/AC up to 28.8 DC/ACup to 28.8 DC/AC up to 28.8 DC/AC
Sensor box – QH-DR-E
Operating medium: filtered compressed air, lubricated or non-lubricated (for pneumatic sensing)•Quick and easy assembly•Drive interface to VDI/VDE 3845 (Namur)•
Sensing method Operating pressureSensing method Operating pressure[bar]
Operating voltage[V]
Max. current output[mA]
Ambient temperature[°C]
Pneumatic sensing -0.95...8Pneumatic sensing -0.95...8 – – -10...60
Electrical sensing –Electrical sensing – 0...250 DC/AC 16,0000...250 DC/AC 16,000 -20...85
Inductive sensing – Inductive sensing – 10...30 DC 200 -20...70
Proximity sensor – SME/SMT
Insertable in slot from above, does not protrude over the cylinder profile•Cable clip and inscription labels included in the scope of delivery•Design for T-slot suitable for DLP, DFPI and DNG•CE marking to EU directive for EMC and to EU directive explosion protection (ATEX)•Explosion protection: up to Zone 0, 1, 2, 20, 21, 22 (ATEX)•
ATEX category gas/dust
Explosion ignition[°C]
Ambient temperature[°C]
Switch output Protection classSwitch output Protection class
II 1 G/ II 1 D T 115 -10...70 Namur IP65/IP67
Displacement encoder – MLO-POT-...-LWG
Connecting rod potentiometer•Absolute measurement with high resolution•Long service life•High degree of protection•Plug-in connection•
Resolution[mm]
Stroke length[mm]
Power supply[V DC]
Wiper current maximum [mA]
Ambient temperature [°C]
0.01 100...750 10 101) -30...100
1) Only permissible in the short-term in the event of a fault
Accessories
Service unit – MS-Series
Sturdy housing•Modular system•Complete product range•High flow rates•
Connections Grade of filtration[µm]
Flow rate[l/min]
Input pressure[bar]
Temperature range[°C]
G¹/8...G2 5 or 40 850...17,000 0.8...20850...17,000 0.8...20 -10...60
Range of tubing
Economical•Hydrolysis resistant•Pressure resistant•Heat resistant•Antistatic•Resistant to cleaning agent•Media resistant•Flame retardant•Resistant to welding spatter•Food industry approved•
Range of fitting
More than 300 connectors•Mini and standard series•Versatile thread/tubing diameter combinations•Flexible assembly, can be repositioned by 360° and combinable•Leakage-free•Flow control, non-return, shut-off and pressure regulating valves available with QS connection•Corrosion and acid resistant design•
Pipping system – QC
Simple, fast installation: cut the length, insert and you’re done!•Can be re-used a number of times•Plug connector material is approved for use by the FDA (Food and Drug Administration)•Leakage-free, corrosion-free•
Outer diameter Ø[mm]
Operating pressure[bar]
Room temperature[°C]
Temperature for water separator [°C]
Pipe material
12...28 -0.95...15 -25...75 -25...75 Polyamide, aluminium
Adsorption dryer – LDM1
Optimum final dryer with excellent operational reliability• Suitable for use as an individual device or for integration in existing service unit combinations• Flow rate dependent dew point reduction• Wear-free function requiring no external energy• Can be mounted near to point of use•
Pneumatic connection(G)
Flow rate[l/min]
Pressure dew point reduction [K]
Temperature range[°C]
Input pressure[bar]
½...11) 300...1,000 17...20 2...50 3...12.5
1) with connection plates
Pressure boaster – DPA
Boost up to twice the supply pressure• Any assembly position in the compressed air network• Maintenance-free• Temperature range: 5...60 °C• Free of paint-wetting impairment substance (LABS-free)•
Note:Please refer to product data sheets for more technical details
Pa.Prod.Overview.indd 13 11/1/2012 2:31:52 PM
Component
Operating level
Remote I/O levelRemote I/O
Valve terminals
Field levelSolenoid valves
Accessories
Sensors
Actuators
Valves / process valves
HandheldMMI
Electrical terminalCPI
Modular electrical terminalCPX
Ball valveVZBC
Ball valveVAPB/VZBA
Butterfly valveVZAB
Pilot operatedVZWM / WZWP
Direct operated valve VZWD
Angle seat valveVZXF
Force pilot operated VZWF
Semi rotary actuatorDFPB
Controlled linear actua-tor DFPI
Manual semi rotary actuator DAPS
Linear actuator DLP
Semi rotary actuatorDRD/DRQ
Semi rotary actuatorDAPS
Analog / Binarysensor box SRAP/SRBP
Proximity sensorSME/SMT
Sensor boxQH-DR-E
Displacement encoderMLO-POT
Sensor boxSRBF
Service unit Push-in fittingsCouplings Pressure boasterDPA
Pilot valveVOFD (Namur)
Pilot valveVOFC (Namur)
Standard valveNVF3 (Namur)
solenoid valveVSNB (Namur)
Valve terminalCPV
Valve terminalMPA/MPA-F
Valve terminalCDVI
Valve terminal for explosive areas CPV Ex-i
Valve terminalVTSA/VTSA-F
Front End DisplayFED (Key)
Front End DisplayFED (Touch)
Plastic tubingsDryerLDM1
Sensor boxDAPS
Product overview
Industry segments
Water & wastewater Biotechnology / pharmaceutical Food & beverage
Manual ball valveCRQH
11/1/2012 2:33:02 PM11/1/2012 2:33:02 PM
Systems Customized System Automation conceptCustomized System Automation concept
Hygenic butterfly valve VZFA
Hygenic ball valve VZBB
Direct operated valve
Controlled linear actua-tor DFPI
Displacement encoderMLO-POT
Pressure boaster
Modular valve terminalCPX/MPA
Semi-rotary actuator DAPSwith ball valve VZBC
Semi-rotary actuator DAPSwith ball valve VZBB
Linear actuator DLPwith knife gate valve VZKA
Semi-rotary actuator DAPSwith butterfly valve VZSA
Semi-rotary actuator DFPBwith ball valve VAPB
Control cabinet for automatic and manual pneumatic operation
Units for high and low temperature application
Compact performancevalve terminal CPV withstainless steel cover
Customised control cabinet solutions, alsofor explosive areas
Semi-rotary actuatorDAPS with ball valve and sensor box
Industrial Ethernet
Fieldbus
1. Centralised installation
Industrial Ethernet
Fieldbus
2. Decentralised installation
Industrial EthernetFieldbus
3. Hybrid installation (centralised / decentralised)
Pipping system
Mining Chemical Pulp / paper processing
Pa.Prod.Overview.indd 15Pa.Prod.Overview.indd 15Pa.Prod.Overview.indd 15Pa.Prod.Overview.indd 15Pa.Prod.Overview.indd 15
AustraliaHead OfficeFesto Pty. Ltd.
Melbourne179 –187 Browns RoadNoble Park Nth VIC 3174Call Toll Free: 1300 88 96 96Call Toll Fax: 1300 88 95 95
Branch OfficesSouth Australia (Adelaide)Call Toll Free: 1300 88 96 96
Queensland (Brisbane)Call Toll Free: 1300 88 96 96
Western Australia (Perth)Call Toll Free: 1300 88 96 96
New South Wales (Sydney)Call Toll Free: 1300 88 96 96
ChinaHead OfficeFesto (China) Ltd.1156 Yun Qiao RoadJinqiao Export Processing Zone201206 Pudong, Shanghai,P.R. ChinaTel: +86-21-6081 5100Fax: +86-21-5854 0300
Branch OfficesBeijingTel: +86-10-65 15 50 96
ChangchunTel: +86-431-88 96 90 30
ChangshaTel: +86-731-8256 4272
ChengduTel: +86-28-86 19 98 70
ChongqingTel: +86-23-63 63 68 66
DalianTel: +86-411-83 60 63 56
HangzhouTel: +86-571-87 22 37 97
JinanTel: +86-531-88 11 39 10
KunmingTel: +86-871-8 23 51 26
LanzhouTel: +86-931-2 35 35 19
NingboTel: +86-574-87 28 92 18
NanjingTel: +86-25-86 81 91 18
QingdaoTel: +86-532-85 79 83 26
ShenyangTel: +86-24-23 25 00 92
SuzhouTel: +86-512-68 28 11 19
TianjinTel: +86-22-26 26 40 76
WuhanTel: +86-27-87 32 27 37
WuxiTel: +86-510-82 75 53 88XiamenTel: +86-592-239 61 23
Xi’anTel: +86-29-62 66 92 96
ZhengzhouTel: +86-371-67 94 49 28
Hong KongHead OfficeFesto Ltd6/F New Timely Factory Building,497 Castle Peak Road,Kowloon, Hong KongTel: +852-27 43-8379Fax: +852-27 86-2173
Branch OfficesGuangdong ProvinceGuangzhouTel: +86-20-8732 1613
Guangzhou TianheTel: +86-20-8600 3032
ShenzhenTel: +86-755-2650 5798
DongguanTel: +86-769-2236 7890
IndiaHead OfficeFesto Controls Pvt. Ltd.237-B, BommasandraIndustrial area,Bangalore Hosur Highway,Bangalore 560 099Tel: +91-80-22894100Fax: +91-80-27832058
Branch OfficesAhmedabadTel: +91-79-26565836
AurangabadTel: +91-240-2337961
BangaloreTel: +91-80-22277582
BarodaTel: +91-265 2975276
ChennaiTel: +91-44-28554491
CoimbatoreTel: +91-422-2499975
HyderabadTel: +91-40-27700283
KolhapurTel: +91-231-2660479
KolkataTel: +91-33-22821276
LudhianaTel: +91-161-2407742
MumbaiTel: +91-22-26673133
NashikFax: +91-253-2316044
Delhi (Noida)Tel: +91 (0)120-2460861PuneTel: +91-20-25521401
IndonesiaHead OfficePT FestoJl. Sultan Iskandar Muda no. 68Arteri Pondok IndahJakarta 12240, IndonesiaTel: +62-21-27 50 79 00Fax: +62-21-27 50 79 98
Branch OfficesBandungTel: +62-22-732 1329, 732 1330,732 0753
BatamTel: +62-816 50 23 10
CikarangTel: +62-21-893 67 49
GlodokTel: + 62-21-659 97 69-70
MakassarTel: +62-813 42 05 52 00
MedanTel: +62-61-453 89 35, 452 00 11
SemarangTel: +62-24-355 66 53, 355 48 24
SurabayaTel: +62-31-849 10 44, 841 05 12
JapanHead OfficeFesto K.K.1-26-10 HayabuchiTsuzuki-ku, Yokohama 224-0025Tel: +81-(0) 45-593-56 10/-5611Fax: +81-(0) 45-593-5678
Branch OfficeOsakaTel: +81-(0)6-6320-3427
KoreaHead OfficeFesto Korea Co., Ltd.470-1 Gasan-dongGeumcheon-guSeoul #153-803Tel: +82-1666 0202Fax:+82-(0) 2-864 7040
Branch OfficesJoongbuTel: +82-(0) 31-655 2951
YeongnamTel: +82-(0) 55-289 7038
DaeguTel: +82-(0) 53-604 4365
DaejeonTel: +82-(0) 42-861 7797
GwangjuTel: +82-(0) 62-955 4168
UlsanTel: +82-(0) 52-292 4215
MalaysiaHead OfficeFesto Sdn Berhad10 Persiaran IndustriBandar Sri Damansara52200 Kuala LumpurTel: +(60 3) 62 86 80 00Fax: +(60 3) 62 75 64 11
Branch OfficesPenangTel: +(60 4) 643 0918
IpohTel: +(60 5) 548 1002
Johor BahruTel: +(60 7) 352 3719
MalaccaTel: +(60 6) 335 1018
New ZealandHead OfficeFesto Ltd20 Fisher CrescentMount WellingtonAucklandTel: +64-(09)-574-10 94Fax: +64-(09)-574 10 99
Branch OfficesChristchurchTel: +64-(0)-33488796
HamiltonTel: 64-(0)-78466080
PhilippinesHead OfficeFesto IncFesto BuildingKM 18, West Service RoadSouth Super Highway1700 Paranaque CityMetro ManilaTel: +63 (2) 77 66 888Fax: +63 (2) 82 34 219
Branch OfficesBacolod and IloiloTel/Fax: +63 (34) 434 3341
BaguioTel: +63 (74) 447-0394
BatangasTel: +63 (919) 275-5857
CebuTel: +63 (32) 345-1120/3017
Cagayan de OroTel/Fax: +63 (88) 857-4904
Davao/ZamboangaTel/Fax: +63 (82) 221-4586
General Santos CityTel: + 63 (83) 382-0005
IliganTel/Fax: +63 (63) 225-9201
Tarlac/Pampanga/Bataan/SubicTel/Fax: +63 (45) 455-3020Mobile Phone: +63 (928) 502-8288
SingaporeFesto Pte Ltd.6 Kian Teck WaySingapore 628754Tel: +65-62640152Fax: +65-62611026
TaiwanHead OfficeFesto Co.Ltd9 Kung 8th RoadLinkou 2nd Industrial ZoneLinkou Dist., New Taipei City24450 Taiwan, R.O.C.Tel: +886-2-2601-9281Fax: +886-2-26019286-7
Branch OfficesHsinchuTel: +886-3-658-8318
TaichungTel: +886-4-2475-7278
KaohsiungTel: +886-7-384-2856
ThailandHead OfficeFesto Ltd.67/1 Phaholyothin RoadKlong 1, Klong LuangPathumthani 12120Tel: +66 (0) 29 01 88 00Fax: +66 (0) 29 01 88 33
Branch OfficesLaemchabang/ChonburiTel: +66 (0) 38 33 06 04
SaraburiTel: +66 (0) 36 31 54 10
VietnamHead OfficeFesto Co., Ltd(Cong Ty Tnhh Festo)No. 1515-1516Vanh Dai Dong StreetWard An Phu, District 2Ho Chi Minh CityTel: +84 (8) 62814453-4454Fax: +84 (8) 62814442
Branch OfficeHanoiTel: +84 (4) 35 56 15 08-1509
www.festo.com
PA.R
3.11
.01.
12
Pa.Prod.Overview.indd 16 11/1/2012 2:33:47 PM