press release - mecsoft corporation - solidworksworld2010.pdfe:[email protected] press release...
TRANSCRIPT
For Release 9 a.m. PDT, Jan 18, 2010
Contact:Anita AnandMecSoft Corporation18019 Sky Park Circle, Suite K-LIrvine, CA 92614 USAT: 949-654-8163 x 106F: 949-654-8164E: [email protected]
Press ReleaseMecSoft to exhibit at SolidWorks® World 2010
Irvine, CA;January18,2010
MecSoft Corporation, the developer of VisualMILL for SolidWorks® an affordable integratedCAM software solution for SolidWorks®, will be exhibiting at the Solidworks World 2010International User Conference.
The SolidWorks World International User Conference and Exposition will be held betweenJanuary 31 and February 3 of 2010 at the Anaheim Convention Center in Anaheim, California,USA. This conference is the largest 3D CAD event of its kind. Featuring technical training,breakouts, and hands-on sessions, users gain insight into modeling methods and methods forincreasing productivity. It is also a unique opportunity to see some of the most excitingproducts being developed using SolidWorks such as MecSoft’s VisualMILL for SolidWorks.
MecSoft will be exhibiting at booth #110 in the Partner Pavilion of the Convention Center. Inaddition to exhibiting the released 32 bit and 64 bit versions of the software, MecSoft will alsobe exhibiting 5-axis simultaneous machining technology during this conference.
About VisualMILL for SolidWorks
VisualMILL for SolidWorks is a based on MecSoft’s industry leading VisualMILL CAM softwarethat is fully integrated in SolidWorks 2008/2009/2010. From simple 2-1/2 axis to full 5-axisindexed milling, VisualMILL for SolidWorks will help you make parts, fast. This product offersseveral configurations to fit your machining needs and is fully integrated with SolidWorks,offering an intuitive combined user interface for CAD and CAM, fully associative toolpathupdates, and a wide variety of post processors. VisualMILL for SolidWorks will save youcountless hours by automatically updating toolpaths when your model changes. And beingintegrated with SolidWorks means you only have one interface to learn. This fully associativeparametric CAD/CAM system makes VisualMILL for SolidWorks one of the most affordableand powerful systems in the market today. Prices of configurations start at US $999.
About MecSoft CorporationMecSoft Corporation, a California based company, is a leading developer and provider ofaffordable CAD/CAM software solutions. Their products such as VisualMILL, RhinoCAM, AlibreCAM, and VisualMILL for SolidWorks are used for manufacturing parts in a wide variety ofindustries including aerospace, automotive, education, general machining, and mold & die. Forfurther information about MecSoft Corporation or any of their products, please call 949-654-8163, visit either www.mecsoft.com or email [email protected].
For Release 9 a.m. PDT, Jan 18, 2010
Contact:Anita AnandMecSoft Corporation18019 Sky Park Circle, Suite K-LIrvine, CA 92614 USAT: 949-654-8163 x 106F: 949-654-8164E: [email protected]
Press ReleaseMecSoft to exhibit at SolidWorks® World 2010
Irvine, CA;January18,2010
MecSoft Corporation, the developer of VisualMILL for SolidWorks® an affordable integratedCAM software solution for SolidWorks®, will be exhibiting at the Solidworks World 2010International User Conference.
The SolidWorks World International User Conference and Exposition will be held betweenJanuary 31 and February 3 of 2010 at the Anaheim Convention Center in Anaheim, California,USA. This conference is the largest 3D CAD event of its kind. Featuring technical training,breakouts, and hands-on sessions, users gain insight into modeling methods and methods forincreasing productivity. It is also a unique opportunity to see some of the most excitingproducts being developed using SolidWorks such as MecSoft’s VisualMILL for SolidWorks.
MecSoft will be exhibiting at booth #110 in the Partner Pavilion of the Convention Center. Inaddition to exhibiting the released 32 bit and 64 bit versions of the software, MecSoft will alsobe exhibiting 5-axis simultaneous machining technology during this conference.
About VisualMILL for SolidWorks
VisualMILL for SolidWorks is a based on MecSoft’s industry leading VisualMILL CAM softwarethat is fully integrated in SolidWorks 2008/2009/2010. From simple 2-1/2 axis to full 5-axisindexed milling, VisualMILL for SolidWorks will help you make parts, fast. This product offersseveral configurations to fit your machining needs and is fully integrated with SolidWorks,offering an intuitive combined user interface for CAD and CAM, fully associative toolpathupdates, and a wide variety of post processors. VisualMILL for SolidWorks will save youcountless hours by automatically updating toolpaths when your model changes. And beingintegrated with SolidWorks means you only have one interface to learn. This fully associativeparametric CAD/CAM system makes VisualMILL for SolidWorks one of the most affordableand powerful systems in the market today. Prices of configurations start at US $999.
About MecSoft CorporationMecSoft Corporation, a California based company, is a leading developer and provider ofaffordable CAD/CAM software solutions. Their products such as VisualMILL, RhinoCAM, AlibreCAM, and VisualMILL for SolidWorks are used for manufacturing parts in a wide variety ofindustries including aerospace, automotive, education, general machining, and mold & die. Forfurther information about MecSoft Corporation or any of their products, please call 949-654-8163, visit either www.mecsoft.com or email [email protected].
For Release 9 a.m. PDT, Jan 18, 2010
Contact:Anita AnandMecSoft Corporation18019 Sky Park Circle, Suite K-LIrvine, CA 92614 USAT: 949-654-8163 x 106F: 949-654-8164E: [email protected]
Press ReleaseMecSoft to exhibit at SolidWorks® World 2010
Irvine, CA;January18,2010
MecSoft Corporation, the developer of VisualMILL for SolidWorks® an affordable integratedCAM software solution for SolidWorks®, will be exhibiting at the Solidworks World 2010International User Conference.
The SolidWorks World International User Conference and Exposition will be held betweenJanuary 31 and February 3 of 2010 at the Anaheim Convention Center in Anaheim, California,USA. This conference is the largest 3D CAD event of its kind. Featuring technical training,breakouts, and hands-on sessions, users gain insight into modeling methods and methods forincreasing productivity. It is also a unique opportunity to see some of the most excitingproducts being developed using SolidWorks such as MecSoft’s VisualMILL for SolidWorks.
MecSoft will be exhibiting at booth #110 in the Partner Pavilion of the Convention Center. Inaddition to exhibiting the released 32 bit and 64 bit versions of the software, MecSoft will alsobe exhibiting 5-axis simultaneous machining technology during this conference.
About VisualMILL for SolidWorks
VisualMILL for SolidWorks is a based on MecSoft’s industry leading VisualMILL CAM softwarethat is fully integrated in SolidWorks 2008/2009/2010. From simple 2-1/2 axis to full 5-axisindexed milling, VisualMILL for SolidWorks will help you make parts, fast. This product offersseveral configurations to fit your machining needs and is fully integrated with SolidWorks,offering an intuitive combined user interface for CAD and CAM, fully associative toolpathupdates, and a wide variety of post processors. VisualMILL for SolidWorks will save youcountless hours by automatically updating toolpaths when your model changes. And beingintegrated with SolidWorks means you only have one interface to learn. This fully associativeparametric CAD/CAM system makes VisualMILL for SolidWorks one of the most affordableand powerful systems in the market today. Prices of configurations start at US $999.
About MecSoft CorporationMecSoft Corporation, a California based company, is a leading developer and provider ofaffordable CAD/CAM software solutions. Their products such as VisualMILL, RhinoCAM, AlibreCAM, and VisualMILL for SolidWorks are used for manufacturing parts in a wide variety ofindustries including aerospace, automotive, education, general machining, and mold & die. Forfurther information about MecSoft Corporation or any of their products, please call 949-654-8163, visit either www.mecsoft.com or email [email protected].