Power Saver

Power Saver

In addition to the newest four battery modes (Performance, Normal, Power saving and Super

saving), you can also customize your settings to fulfill various needs.

Please select your preferred battery mode in [Settings] -> [Power management] -> [Power

Saver].

Note: This function may not be available in some models, countries or firmware versions.

Check default settings of battery modes

You can check estimated remaining standby time (it will change according to battery level) and

default settings of different modes. Except for "Customized" mode, settings of all modes cannot

be adjusted.

Customize your battery settings

You can also select "Customized" mode to manually change settings of CPU performance,

brightness, network and extend standby.

Smart switch - Auto switch to another mode when battery is low or in a scheduled time

1. Switch by battery level:

Make your device auto switch to Super saving mode when battery is low.

2. Switch by schedule:

Make your device switch to another mode during a period of time set by your preference.

SIM Cards

Triple slots: Dual SIM & one MicroSD card

Slot 1: 3G/4G Nano SIM card

Slot 2: 3G/4G Nano SIM card

Both SIM card slots support 3G WCDMA / 4G LTE network band. But only one SIM card can

connect to 3G WCDMA / 4G LTE service at a time.

Slot 3: Supports up to 2TB MicroSD card

How does a customer set up APN information

on our Android phones?

How does a customer set up APN information on our Android phones?

Customer(s) can go to APPS- SETTINGS – MORE – (MOBILE) or (CELLULAR)

NETWORKS –

ACCESS POINT NAMES – Then tap on the upper right (+) sign to add an APN in the field(s).

Most cellular providers will provide the APN information on their website or when the customer

contacts them.

Putting in the correct APN (Access Point Name) information will provide the customer with

4G/LTE data speeds from the carrier they are on.

Instructions with screenshots below.

1. Tap on APPS.

2. Tap on Settings.

3. Tap on More.

4. Tap on Cellular Networks.

5. Tap on Access Point Names. Make sure the (Data enabled) check mark box is ticked and the

(Preferred network type) box shows 2G/3G/4G.

6. Tap on the (+) icon to manually add an APN (Access Point Name).

7. You will be taken to the (Edit access point) menu. Tap on any field (not set) to manually edit it

with the carrier's APN information.

8. Tapping (Name) field will bring up the on screen keyboard to input the Name field for the

carrier. Example below.

9. After verifying that all the APN information is filled in correctly from the carrier, tap on the

OPTIONS icon (represented by 3 dots on the upper right of the screen) to SAVE or DISCARD

the changes.

10. SAVE or DISCARD options drop down menu. Tap to execute SAVE or DISCARD changes.