power over ethernet - techware finland oy · pdf file02 power over ethernet what is poe?...

16
Compact, Affordable, Safe & Reliable Power Solution www.planet.com.tw Power over Ethernet Cost-Effective Power Distribution Centralized Power Management Remote Power Feeding Dramatically Reduce Installation Costs Easy Plug-and-Play Installation

Upload: ledung

Post on 20-Mar-2018

223 views

Category:

Documents


1 download

TRANSCRIPT

Compact, Affordable, Safe & Reliable Power Solution

www.planet.com.tw

Power over Ethernet

Cost-Effective Power Distribution Centralized Power Management

Remote Power Feeding Dramatically Reduce Installation Costs

Easy Plug-and-Play Installation

Power over Ethernet02

is PoE?What

Figure 1: Power over Ethernet: Utilize the Ethernet

cable wires to transfer power in addition to data

v PoE System ArchitectureThe specification of PoE typically requires two devices: the

Powered Source Equipment (PSE) and the Powered Device

(PD). The PSE is either an End-Span (ex: PoE Switch) or an Mid-

Span (ex: PoE Injector Hub), while the PD is a PoE powered

terminals, such as the IP Camera, IP Phones, Wireless Access

Point and etc., as shown in the figure 1.

In the PoE architecture, power can be delivered over data pairs

or spare pairs of standard CAT-5 cabling. In the standard

CAT-5 cabling, 4 wires are used in 10/100 Ethernet for power

transfer and the other 4 wires for ordinary data transfer under

PoE structure. Wherever the cable goes, the power goes too.

PoE power injector device plays either as a Mid-Span or an End-

Span terminal to deliver data and power. Mid-Span and End-

Span PoE power injector devices transmit power in different

ways which are illustrated below: [Figure 2 and Figure 3]

v Mid-SpanMid-Span device is placed between legacy Switch and the powered

device. Mid-Span is tap the unused wire pairs 4/5 and 7/8 to carry

power, the other four is for data transmission.

Figure 2. Mid-Span Power Delivery

v End-SpanEnd-Span device is direct connected with power device. End-Span could also

tap the wire 1/2 and 3/6.

Figure 3. End-Span Power Delivery

Based on the global standard IEEE 802.3af, Power over Ethernet

(PoE) provides an innovative, standard-based application to

deliver rich functionality and flexibility to your network. PoE is

a technology for wired Ethernet and allows the 48V electrical

power carried over RJ-45 wiring to each end-device rather than

by separate power cords. PoE enables IP network applications

such as IP Cameras, VoIP Phones, and Wireless Networking

more flexibly deployed regardless of the limit availability of

outlet and therefore helps enterprises improve productivity.

Widely adopted in the market now, PoE remarkably reduces

installation costs and improves management of network.

100Base-TX UTP

PoE 100Base-TX UTP w PoE

Power

PoE Injector Solution

Data

Uplink

PoE CameraPoE

Injector

Power over Ethernet

Data + Power

100m

Non PoE Switch

PoE

AC Power

PoE Switch Solution

PoE CameraPoE Switch

100m

Data

Uplink

Data + Power

Power over Ethernet

PoE

AC Power

Non PoE Connection Solution

PoE Camera

Power

Data

Non PoE Switch

Data

Uplink

100m

AC Power AC Power

SPARE PAIR

48V

+

-

POWERED DEVICE(PD)

POWERED SOURCINGEQUIPMENT(PSE)

4

5

1

2

3

6

7

8

4

5

1

2

3

6

7

8

SPARE PAIR

SINGLE PAIR

RXDC/DC

Converter

SINGLE PAIR

TXRX

TX

SPARE PAIR

48V

+/-

+/-

POWERED DEVICE(PD)

POWERED SOURCINGEQUIPMENT(PSE)

4

5

1

2

3

6

7

8

4

5

1

2

3

6

7

8

SPARE PAIR

SINGLE PAIR

RXDC/DC

Converter

SINGLE PAIR

TXRX

TX

Power over Ethernet02

Pioneer of IP Innovation 03

Consider the following scenarios:

In order to minimize cabling costs, you are planning to install

the latest VoIP Phone system for your company’s new office.

The company staff demands for a wireless access point in

the public area behind the building so they could work on

their laptops in outdoor activities, but the electrical power

to the outside is not affordable.

Management asks for IP Surveillance Cameras and business

access systems throughout the facility, but they would rather

avoid another electrician’s payment.

PoE technology is the right solution for the above demanding

requirements and it helps to minimize the necessary wires

for the network distribution and lower the deployment

cost. Leading the PoE technology applications, PLANET

Technology has offered the various types of PoE equipments

in the market to meet the different powering requirements

of SOHO/home users, SMB and enterprises.

PLANET delivers the most cutting-edge PoE solutions which

offer the benefits as below:

v Reduce Installation CostsPoE devices use a single and standard Cat-5 Ethernet cable

for both power and data transmission, which eliminates

the needs of installing separate electrical wiring and

outlets. Besides, most enterprises have already run Cat

5 Ethernet cabling through the ceiling to every desktop.

The cabling for these new network applications is already

in place and thus eliminating the installation time.

v Easy DeploymentWith the RJ-45 connector design in PoE devices, it is easy

to add PoE powered devices such as IP cameras, IP phones,

wireless APs and Switches into the existing business network.

PoE helps your businesses grow quickly.

v Protect InvestmentNew networking applications can take advantage of an

Ethernet connection for both power and connectivity.

Furthermore, the 802.3af complied devices also provide

detection to protect the remote devices.

v Simplicity & MobilityBy using standard-based PoE products, networks can perform

the best solutions for the individual pieces of the network,

instead of being tied into a single vendor with a proprietary

system. PoE applications are highly flexible in mixing and

matching different vendors to ensure the most optimal

solution for business operation.

v Integration ManagementThe PLANET PoE Solution is able to fully integrate with the

hardware and software. For small scale of PoE deployment,

device-level management may be adopted easily. For large

scale of Power over Ethernet installations, such as IP Telephony,

PLANET provides management solution which could help the

powered devices automatically manage themselves. This

approach reduces the total configuration requirement and

eliminates configuration errors due to inconsistency between

the application and the network ports.

v Reliability with UPSPoE devices offer centralized power delivery by an

uninterruptible power supplies (UPS) which maintains

operation even when the main power fails. Mission critical

devices, such as IP Cameras and IP Phones, keep continually

working to meet client’s various demands.

v Centralized Power ManagementPoE smart PSE devices offer graphic user interface to

centralized control, plan and monitoring per port power

feeding / consumption of the PD device. It helps the System

Integrator to centralize power distribution via existing

Ethernet cables with the need to increase infrastructure.

Benefits of PLANET PoE Applications

Power over Ethernet04

v OfficeWith the business office expansion, the additional telephones

are required, however they could be installed in less cost via the

implementation of PoE IP Telephony system compared to the

traditional circuit wiring telephony system. PLANET PoE solution

helps enterprises to create an integrated data, voice, and powered

network. PLANET 802.3af compliant IP Phones can be installed

without requirement of an additional power cable because the

power can be provided from the standard Ethernet cable. PoE IP

Phones and Analog Telephony Adapter work perfectly with PLANET

Mid-Span and End-Span equipments which inject power through the

Ethernet cables. With PLANET PoE Solution, IP Telephony becomes

more reliable and cheaper to install, which helps enterprises save

tremendous cost when upgrading to IP Telephony communications

infrastructure. PLANET PoE IP Phones including Business IP Phones,

as well as PoE ATA, may be referred for more details in the PLANET

IP Telephony Solution Guide.

v TransportationIn modern time, more and more people use Internet

service during travel times, either for business or for

leisure. Besides the wired Internet network, the wireless

LAN would be more efficient for the transportation station

to provide high-speed and wide area Internet services for

travelers. With the PoE wireless LAN APs connected,

people can experience the wireless LAN roaming service

within the Wi-Fi coverage even when the transportation

itself like train, bus or ship moving on the way. By

adopting PoE Wireless LAN structure, the transportation

authority gains benefit from costing less while providing

better Internet services in wider areas for the travelers.

v FinanceThe PoE construction would also highly benefit to the financial /

bank security and communication system. The PoE IP Surveillance

system helps watch the bank / safe deposit security, the PoE

wireless LAN system provides the employee a convenient

Internet service and PoE IP Telephony system improves the voice

communicating in the bank with lower cost.

PLANET PoE Application

Ground Floor

1F

2F

3F

PoE (Data + Power)

SGSW-2840P

PoE Switch

VIP-254PT

ICA-HM130

ICA-H312

ATA-15X

ICA-HM135

POE-151SPOE-151S

100Base-TX UTP

PoE 100Base-TX UTP w PoE

Power

PoE

PoE

PoE

PoE

PoE

PoE

PoE

PoE

Core Switch

PoE Wireless AP (PD)

PoE Wireless AP (PD)

PoE SwitchPoE Switch

PoE Switch

100Base-TX UTP

PoE 100Base-TX UTP w PoE

PoEPoE

PoE

PoEPoE

PoE

PoE

PoEPoE

PoE

Train

Central Management Center

Airport

LAN / PCs

PoE Switch (PSE)

PoE Wireless AP

Data

Power

Data + Power

Data + Power

PoE VoIP ATA

PoE IP Camera

PoE VoIP PhonePhone

PoE

PoE

PoE

PoE

100Base-TX UTP

PoE 100Base-TX UTP w PoE

Telephone wire

Power

Power over Ethernet04

Pioneer of IP Innovation 05

Description Managed Web Smart

Product

SeriesModel SGSD-1022P

SGSW-2840P / SGSW-2840P4

FGSD-1022PFGSW-2612-

PVMFGSW-2620PVM

FGSW-2620VMP4SGSW-24040P

SGSW-24040P4FNSW-1608PS / FGSW-1828PS

GSD-802PS FSD-804PS

Product Image

Hardware 10/100Base-TX 8 24 8 24 24 - 16 - 8

10/100/1000Base-T 2 4 2 2 2 24 - / 2 8 -

Mini-GBIC 2 4 2 2 2 4 - / 2 2 -

Switch Fabric 5.6Gbps 12.8Gbps 5.6Gbps 8.8Gbps 8.8Gbps 48Gbps 3.2 / 7.2Gbps 16Gbps 1.6Gbps

MAC Table 8K 8K 8K 8K 8K 8K 4K 8K 1K

Jumbo Frame 9K 9K 9K 9K 9K 9K - 9K -

PoE PoE Standard IEEE 802.3af

Units Can Be

Powered8 24 8 12 24 24 8 8 4

PoE PowerOutput 48V DC, Max. 15.4 Watts, 350mA

Power Pin Assignment 1/2(+), 3/6(-) 1/2(+), 3/6(-) 1/2(+), 3/6(-) 1/2(+), 3/6(-) 1/2(+), 3/6(-) 1/2(+), 3/6(-) 1/2(+), 3/6(-) 1/2(+), 3/6(-) 1/2(+), 3/6(-)

Power Budget 110W 220W / 380W 180W 110W 190W/380W 220W/380W 110W 110W 55W

PoE Priority < < < < < < < < <

Power Limit < < < < < < < < <

Power StatusMonitor < < < < < < < < <

PoE Schedule - - - - - < - - -

Interface Port Con"gure < < < < < < < < <

Port Mirror TX, RX, Both TX, RX, Both TX, RX, Both TX, RX, Both TX, RX, Both TX, RX, Both - TX -

Link

AggregationPort Trunk 5 groups /

8-Port12 groups

/ 8-Port13 groups

/ 8-Port13 groups

/ 8-Port 13 groups / 8-Port 12 groups / 16-Port 2 groups / 4-Port 8 groups

/ 8-Port -

LACP 5 groups / 8-Port

12 groups / 8-Port

13 groups / 8-Port

13 groups / 8-Port 13 groups / 8-Port 12 groups /

16-Port - 8 groups / 8-Port -

VLAN Port-Based - - < < < < < < <

802.1Q VLAN < < < < < < < * < <

Spanning

Tree

802.1d < < < < < < - < -

802.1w < < < < < < - < -

Multicast IGMP Snooping v1, v2 v1, v2 v1, v2 v1, v2 v1, v2 v1, v2, v3 v1, v2 * v1, v2 -

Quality

of Service

802.1p Priority < / 4 queues < / 4 queues < / 4 queues < / 4 queues < / 4 queues < / 4 queues < / 2 queues < / 4 queues < / 2 queues

IP DSCP < < < < < < < < <

Rate Control Ingress < < < < < < < - <

Egress < < < < < < < - <

SecurityIP/MAC ACL,

IEEE 802.1x Port Security

IEEE 802.1xStatic MACMAC Filter

Static MAC * IEEE 802.1xStatic MAC -

Management Console < < < < < < - - -

WebManagement < < < < < < < < <

Telnet < < < < < < - - -

SNMP v1, v2c, v3 v1, v2c, v3 v1, v2c, v3 v1, v2c v1, v2c v1, v2c, v3 - v1, v2c Trap

FirmwareUpgrade TFTP TFTP TFTP/Web TFTP/Web TFTP/Web TFTP/Web Web Web Web

Stacking < < - - - < - - -

Dimension (W x D x H mm) 330 x 155 x 43.5 440 x 300 x 44 330 x 155 x 43.5 440 x 265 x 44 440 x 300 x 44 440 x 300 x 44 440 x 120 x 44 330x155x43.5 217x135x43

Power Supply 100~240V AC, 50/60Hz, Universal Power Supply

EMI Safety FCC Class A, CE

PoE Switch Product MatrixFor different applications required in different enterprises and client users, PLANET offers PoE Switches from Full Managed, Web-Smart, to

standard PoE Switches that features 4-Port PoE to 24-Port PoE choices to fulfill the varied needs of customers. With the Ethernet switching,

PoE and full power supply system are integrated in one box design, the SGSW-2840P4 and SGSW-24040P4 provide 380watts power budget to

satisfy the increasing needs for power consumption of powered devices, such as wireless AP and PoE IP camera. The IP-based remotely Web

management interface also provides an effective central power management solution to monitor and control per port power feeding of deployed

powered devices.

* Hardware Version 2

Power over Ethernet06

Layer 2 Managed 802.3at PoE Switch Product MatrixDescription Layer 2 Managed 802.3at PoE Switch

Product

Series

Model FGSD-1022HP WGSW-2620HP WGSD-8020HP SGSW-24040HP

Product Image

Hardware 10/100Base-TX 8 24 - -

10/100/100Base-T 2 2 8 24

100Base-FX - - compatible compatible

1000Base-SX/LX 2 combo 2 combo 2 combo 4 combo

Fiber Connector Type SFP SFP SFP SFP

Stacking Interface - - - 2 x 5Gbps

Switch Fabric 5.6Gbps 8.8Gbps 16Gbps 68Gbps

MAC Table 8K 8K 8K 8K

Jumbo Frame 9K 9K 9K 9K

PoE PoE Standard 802.3af / 802.3at 802.3af / 802.3at 802.3af / 802.3at 802.3af / 802.3at

PoE 802.3af Port 8 24 8 24

PoE Power Output 52V DC, Max. 30.8 watts 52V DC, Max. 30.8 watts 52V DC, Max. 30.8 watts 52V DC, Max. 30.8 watts

PoE Budget 150 watts 320 watts 150 watts 320 watts

PSE Type End-Span End-Span End-Span End-Span

Power Pin Assignment 1/2(+), 3/6(-) 1/2(+), 3/6(-) 1/2(+), 3/6(-) 1/2(+), 3/6(-)

Over Temperature Protection < < < (Future support)

PoE Schedule - - < <

Power Limit < < < <

PoE Classi"cation < < < <

Interface Port Con"gure (Speed/ Duplex) < < < <

Port Mirror TX, RX, Both TX, RX, Both TX, RX, Both TX, RX, Both

Link

Aggregation

Port Trunk < < < <

802.3ad LACP < < < <

Groups / Ports per Group 13 Groups / 8 Ports 13 Groups / 8 Ports 4 Groups / 8 Ports 12 Groups / 16 Ports

VLAN Port-Based < < < <

802.1Q VLAN < < < <

Private VLAN < < < <

Spanning

Tree

802.1d < < < <

802.1w < < < <

802.1s < < < <

Multicast IGMP Snooping v1, v2 v1, v2 v1, v2, v3 v1, v2, v3

IGMP Querier < < < <

MVR - - < <

QoS 802.1p priority < / 4 queues < / 4 queues < / 4 queues < / 4 queues

IP TOS/DSCP < < < <

Protocol Number (TCP/UDP) < < < <

Rate Control Ingress < < < <

Egress < < < <

Access Control List IP-Based < < < <

MAC-Based - - < -

TCP / UDP < < < <

Security 802.1x Port-Based < < < <

MAC-Based - - < <

Static MAC < / 512 < / 512 < / 64 < / 64

MAC Binding < < - -

MAC Filtering - - By ACL By ACL

Port Security < < < / 1024 MAC < / 1024 MAC

RADIUS < < < <

TACACS+ - - < <

Management IPv6 Management - - < <

Console (RS-232) < < < <

Telnet < < < <

Web Management < < < <

SNMP v1, v2c, v3 v1, v2c, v3 v1, v2c, v3 v1, v2c, v3

SNMP Trap < < < <

RMON 1,2,3,9 1,2,3,9 1,2,3,9 1,2,3,9

SSH/SSL - / < - /< < /< < /<

Stacking Single IP Management - - - <

Local System log / Remote Syslog - - < / < < /<

LLDP < < < <

Dimension ( W x D x H) 330 x 155 x 43.5mm 440x300x44 mm 330 x 155 x 43.5mm 440x300x44 mm

Power Requirement 100~240V AC, 50/60Hz 100~240V AC, 50/60Hz 100~240V AC, 50/60Hz 100~240V AC, 50/60Hz

EMI / Safety FCC Class A, CE FCC Class A, CE FCC Class A, CE FCC Class A, CE

Pioneer of IP Innovation 07

PoE Injector Hub Product MatrixThe PLANET POE-400/1200/2400 Series is a 4/12/24-

Port IEEE 802.3af Power over Ethernet Injector Hub

complied with IEEE 802.3, IEEE 802.3u and IEEE 802.3af

standards. Equipped with 4/12/24 10/100Base-TX

Fast Ethernet ports, the products support full 48VDC

power for remote IEEE 802.3af Powered Devices like

Wireless LAN Access Point, IP Phone, and IP Camera.

Supporting power supply up to 380 Watts, the POE-

1200P2/1200G/2400P4/2400G provides sufficient

power to the 12/24 remote devices.

To manage the powered devices, the POE-1200/2400

provides Web management interfaces for management of

port enable/disable, port priority, system configuration,

and username/password change with smart features

for powered devices. The Hub can automatically detect

the power status on each port and display massages

on Web management interface. These features provide

a cost-effective way of remote management whenever

you are at work or at home.

Description PoE Injector Hub

Product

Series

Model POE-400 POE-1200 POE-1200P2 POE-1200G POE-2400 POE-2400P4 POE-2400G

Product Image

Interface RJ-45 Data

Input Ports4 12 12 12 24 24 24

RJ-45 “Data

+ Power”

Output Ports

4 12 12 12 24 24 4

Data Rate 10/100Mbps 10/100Mbps 10/100Mbps 10/100/1000Mbps 10/100Mbps 10/100Mbps 10/100/1000Mbps

PoE PoE Standard IEEE 802.3af Power over Ethernet

Units can be

Powered4 12 12 12 24 24 24

PoE Power Output 48V DC, Max. 15.4 Watts, 350mA

Power Pin

Assignment4/5(+), 7/8(-) 4/5(+), 7/8(-) 4/5(+), 7/8(-) 4/5(+), 7/8(-) 4/5(+), 7/8(-) 4/5(+), 7/8(-) 4/5(+), 7/8(-)

Power Budget 60W 110W 190W 190W 220W 380W 380W

PoE Priority - < < < < < <

Power Limit - < * < < < * < <

Power Status

Monitor- < < < < < <

PoE Schedule - - - < - - <

Layer 2

Feature

Management

Interface- Web Web Web/SNMP Web Web Web/SNMP

Firmware Upgrade - Web Web Web Web Web Web

SNMP Trap - < * < < < * < * <

Hardware Dimension

(W x D x H)70 x 97 x 26 mm

440 x 200 x 44 mm

440 x 200 x 44 mm 440 x 200 x 44 mm 440 x 200 x

44 mm440 x 200 x

44 mm 440 x 200 x 44 mm

Weight 220g 2.8kg 2.8kg 2.8kg 3.32kg 3.32kg 3.32kg

Power Supply 48V DC, 1.5A 100~240V AC, 50/60Hz, Universal Power Supply

EMI Safety FCC Class A, CE

Rack-mountable - < < < < < <

* Hardware Version 2

Conventional

Ethernet Switch

WGSW-2840

100Base-TX UTP

Telephone wire

PoE 100Base-TX UTP w PoE

PoEPoEPoE

PoE

VIP-255PT VIP-255PT VIP-255PT

POE-2400P4

ATA-151PE

Telephone

Power over Ethernet08

High Power 802.3at PoE Injector Hub Product MatrixDescription PoE Injector Hub

Product

Series

Model HPOE-1200G HPOE-2400G HPOE-400

Product Image

Hardware RJ-45 Data Input Ports 12 24 4

RJ-45 Data Output Ports 12 24 4

Data Rate 10/100/1000Mbps 10/100/1000Mbps 10/100/1000Mbps

PoE PoE Standard 802.3af / 802.3at 802.3af / 802.3at 802.3af / 802.3at

PoE 802.3af Port 12 24 4

PoE Power Output 52V DC, Max. 30.8 watts 52V DC, Max. 30.8 watts 52V DC, Max. 30.8 watts

Power Pin Assignment 4/5(+), 7/8(-) 4/5(+), 7/8(-) 4/5(+), 7/8(-)

Power Budget 150 watts 320 watts 120 watts

PSE Type Mid-Span Mid-Span Mid-Span

Over Temperature Protection < < -

PoE Schedule < < -

Power Limit < < -

PoE Priority < < -

PoE Classi"cation < < -

Management Web Management < < -

SNMP v1, v2c v1, v2c -

SNMP Trap < < -

Firmware Upgrade HTTP, TFTP HTTP, TFTP -

Con"guration backup/recovery < < -

Mechanical Dimension ( W x D x H ) 440 x 300 x 44 mm 440 x 300 x 44 mm 70 x 97 x 26mm

Rackmountable < < -

Power Supply Internal Internal External

Power Requirement 100~240V AC, 50/60Hz 100~240V AC, 50/60Hz 52VDC, 2.5A

Rugulator EMI / Safety FCC Class A, CE FCC Class A, CE FCC Class A, CE

* Hardware Version 2

30W15W

High Power PSEPOE-2400G

802.3af

IP Camera

802.3at

30W

PTZ / Speed Dome Camera

Pioneer of IP Innovation 09

PoE Single-Port Injector Product MatrixDescription PoE Injector

Product

SeriesModel

FTP-802 / FTP-802S15

POE-161 POE-152 POE-151 POE-100

Product Image

Interface RJ-45 Data Input Ports 1 x 100Base-FX SC 1 1 1 1

RJ-45 “Data+Power”

Output Ports1 1 1 1 1

Data Rate 10/100Mbps 10/100/1000Mbps 10/100/1000Mbps 10/100Mbps 10/100Mbps

PoE PoE Standard IEEE 803.3af IEEE 803.3at* IEEE 802.3af Power over Ethernet Pre-standard

Units can be Powered 1 1 1 1 1

Power Output PoE 48V DC, Max. 15.4 Watts, 350mA PoE 56V DC PoE 48V DC,

Max. 15.4 Watts, 350mAPoE 48V DC,

Max. 15.4 Watts, 350mA PoE 15V DC

Power Pin Assignment 1/2(+), 3/6(-) 4/5(+), 7/8(-) 1/2(+), 3/6(-) 4/5(+), 7/8(-) 4/5(+), 7/8(-)

Power Budget 15.4 Watts 30 Watts 15.4 Watts

LED Indicator1 x Power; 1 x FX, LNK/ACT;

1 x TX, LNK/ACT; PoE in Use : Detect PSE Device

1 x power, 1 x POE ready / in-use

Ethernet CableCooper : RJ-45

Fiber : SC, Multi-modepatch cord

TIA/EIA-568, Cataegory 5/5e/6 cable

Hardware Dimension ( W x D x H) 94 x 70 x 26 mm 94 x 72 x 30 mm 73 x 55 x 24 mm 73 x 55 x 24 mm 69 x 93 x 25 mm

Weight 220g 90g 50g 50g 90g

Power Supply 48V DC, 0.4A,External AC adapter

56V DC, 075A,External AC adapter 48V DC, 0.4A, External AC adapter

Material Metal Plastic Plastic Plastic Metal

EMI Safety CE, FCC Class A CE, FCC Class A CE, FCC Class B

100m 200m 300m0m 400m 500m

POE-E101POE-151 POE-E101 PoE IP Camera

PoE Extender

Outdoor AP

PoE

POE-151

PoE Camera

FTP-802

100Base-TX UTP

PoE 100Base-TX UTP with PoE

Power

PoE

Power

Power

PoE

600m

PoE

100Base-FX Fiber-optic100

100

PoE and Distance Extension

Switch

Data

Data

Data

* IEEE 803.3at Pre-Standard

Power over Ethernet10

Description PoE Splitter PoE Extender

Product

Series

Model POE-161S POE-152S POE-151S POE-100S POE-E101

Product Image

Interface RJ-45 Data Output Ports 1 1 1 1 1

RJ-45 “Data+Power”

Input Ports1 1 1 1 1

Data Rate 10/100/1000Mbps 10/100/1000Mbps 10/100Mbps 10/100Mbps 10/100Mbps

PoE PoE Standard IEEE 802.3at*** IEEE 802.3af Power over Ethernet Pre-Standard* IEEE 802.3af

Units can be Powered 1 1 1 1 1

Power Input PoE 56V DC PoE 48V DC PoE 48V DC PoE 15V DC PoE 48V DC

Power Output 5V / 12V DC, Max. 5A(adjustable)

5V / 12V DC, Max. 2A (adjustable)

5V / 12V DC, Max. 2A (adjustable)

5V / 9V/ 12V DC, Max. 2A (adjustable)

PoE 48V DC(802.3af PoE 48V DC**)

LEDs 1 x Power 1 x Power, 1 x IN,1 x OUT

Hardware Ethernet Cable TIA/EIA-568, Cataegory 5/5e/6 cable

Dimension ( W x D x H) 94 x 72 x 30 mm 73 x 55 x 24 mm 73 x 55 x 24 mm 69 x 93 x 25 mm 94 x 70 x 26 mm

Weight 90g 50g 50g 90g 190g

Material Plastic Plastic Plastic Metal Metal

EMI Safety CE, FCC Class B CE, FCC Class A

* Pre-Standard should run in pair. ** Output power consumption vary on number of POE-E101 cascade. *** Pre-Standard

PoE Single-Port Splitter Product Matrix

100Base-TX UTP

PoE 100Base-TX UTP with PoE

Power Line (DC)DC

DC

PoE

POE-161S

POE-152S

POE-E101

<15W0W 15.4W 25W

IP Dome Camera

11n Access Point

Speed Dome Camera

DC

PoE Splitter

PoE Splitter

PoE Extender

PoE

PoE Injector

Distance 100m

802.3at

802.3af

802.3af

PoE

PoE

Power Data

Power Data

PoE and Supplied Power Consumption

Pioneer of IP Innovation 11

Industrial Power over EthernetPoE feature is more often supported in the industrial

Ethernet devices for efficient operation in harsh

environments. The PLANET industrial PoE switch series

in-line power follows standard IEEE 802.3af and able to

give power to PoE compliant devices at the distance up

to 100 meters through the 4-pair Cat 5 / 5e UTP wire.

With Data and Power over Ethernet from one unit, the

Industrial PoE series shall reduce cables deployment and

eliminates the need for dedicated electrical outlets on

the wall, ceiling or any unreachable place. A wire that carries

both data and power lowers the installation costs, simplifies

the installation effort and eliminates the need for electricians

or extension cords.

Furthermore, there is only 24V DC input in some industrial

environments, the ISW-504Px / ISW-514Px series supports 24V

DC or 48V DC dual voltages input and able to provide more

wide range of industrial IEEE 802.3af PoE applications.

Control Center

Steel Factory (1)

Steel Factory (2)

Warehouse

PoE IP Cam

PoE IP Cam

PoE Wireless AP

Fiber

Fiber

PC

PoE IP Cam

PoE IP Phone

PoE IP Phone ISW-514PSF

ISW-514PSF

ISW-514PS

Fiber

100Base-FX Fiber-optic100

100Base-TX UTP

PoE 100Base-TX UTP with PoE

100100

100

PoE

PoE

PoE

PoE

PoE

PoE

PoE

Manufactory Networking , Surveillance and Wireless Service

Management interfaces

4-Port 10/100Mbps with PoE + 1-Port

100FX Industrial Web Smart Switch

ISW-514PSF / ISW-514PS

Power over Ethernet12

Description Unmanagement Management

Product

Series

Model ISW-504PT ISW-514PT ISW-514PTF ISW-504PS ISW-514PS ISW-514PSF ISW-1022MPT

Product Image

Hardware 10/100Base-TX 5 4 4 5 4 4 8

10/100/100Base-T - - - - - - 2

100Base-FX - 1 / MM / 2km 1 - 1 / MM / 2km 1 -

1000Base-SX/LX - - - - - - 2 combo

Fiber Connector Type - SC SFP - SC SFP SFP

Switch Fabric 1.0G 1.0Gbps 1.0Gbps 1.0G 1.0Gbps 1.0Gbps 5.6G

MAC Table 2K 2K 2K 1K 1K 1K 8K

PoE PoE Standard 802.3af 802.3af 802.3af 802.3af 802.3af 802.3af 802.3af

PoE 802.3af Port 4 4 4 4 4 4 8

PoE Budget 60 watts max. 60 watts max. 60 watts max. 60 watts max. 60 watts max. 60 watts max. 130 watts

PSE Type End-Span End-Span End-Span End-Span End-Span End-Span End-Span

Power Pin Assignment 1/2(+), 3/6(-) 1/2(+), 3/6(-) 1/2(+), 3/6(-) 1/2(+), 3/6(-) 1/2(+), 3/6(-) 1/2(+), 3/6(-) 1/2(+), 3/6(-)

Interface Port Con"gure(Speed/ Duplex) - - - < < < <

Port Mirror - - - TX, RX, Both TX, RX, Both TX, RX, Both TX, RX, Both

Link

Aggregation

Port Trunk - - - - - - <

802.3ad LACP - - - - - - <

Groups /Ports per Group - - - - - - 4 Groups/4 Ports

VLAN Port-Based - - - < < < <

802.1Q VLAN - - - < < < <

GVRP - - - - - - <

Active VLAN - - - 16 16 16 256

Spanning

Tree

802.1d - - - - - - <

802.1w - - - - - - <

Multicast IGMP Snooping - - - - - - v1, v2

QoS IGMP Querier - - - - - - <

802.1p priority - - - < / 2 levels < / 2 levels < / 2 levels < / 8 levels

Port-Based - - - < < < <

IP TOS/DSCP - - - DSCP DSCP DSCP TOS

Rate Control Ingress - - - < / 128Kbps < / 128Kbps < / 128Kbps < / 100Kbps

Egress - - - < / 128Kbps < / 128Kbps < / 128Kbps < / 100Kbps

Security 802.1x Port-Based - - - - - - <

Static MAC - - - - - - <

MAC Binding - - - - - - IP-MAC Binding

MAC Filtering - - - - - - <

IP Filtering - - - - - - <

Management Console (RS-232) - - - - - - <

Telnet - - - - - - <

Web Management - - - < < < <

SNMP - - - - - - v1, v2c, v3

SNMP Trap - - - < < < <

Firmware Upgrade - - - HTTP HTTP HTTP TFTP

Local System log /Remote Syslog - - - - - - < /<

Time Server - - - - - - <

DHCP Server - - - - - - <

Mechanical Dimension( W x D x H ) 135 x 87.8 x 56 mm 135 x 87.8 x 56 mm 135 x 87.8 x 56 mm 135 x 87.8 x 56 mm 135 x 87.8 x 56 mm 135 x 87.8 x 56 mm 72mm x 105mm x 152mm

PowerRequirement 24V or 48V DC 24V or 48V DC 24V or 48V DC 24V or 48V DC 24V or 48V DC 24V or 48V DC 48V DC

Redundant Power 24V or 48V DC 24V or 48V DC 24V or 48V DC 24V or 48V DC 24V or 48V DC 24V or 48V DC 48V DC

Rugulator EMI / Safety FCC Class A, CE FCC Class A, CE FCC Class A, CE FCC Class A, CE FCC Class A, CE FCC Class A, CE FCC Class A, CE UL, cUL

Environment Operating -40~75 Degree C -40~75 Degree C -40~75 Degree C -10~60 Degree C -10~60 Degree C -10~60 Degree C -40~75 Degree C

Storage -40~85 Degree C -40~85 Degree C -40~85 Degree C -40~85 Degree C -40~85 Degree C -40~85 Degree C -40~85 Degree C

Industrial Power over Ethernet Switch Product Matrix

Pioneer of IP Innovation 13

Description IP Cameras

Product

Series

Model ICA-HM125 ICA-HM135 ICA-HM230 ICA-HM350 ICA-H312 ICA-107P

Product

Image

Sensor 1/3” Progressive Scan CMOS 2.0 megapixel

1/4” Mega-Pixel CMOS 1.3 megapixel

1/3” Mega-Pixel CMOS 1.3 megapixel

1/4” Mega-Pixel CMOS 1.3 megapixel 1/3” Sony CCD 1/4” Color CMOS

Lens 6mm, f: 1.2 2.7-9mm, f: 2.0 6mm, f: 1.6 6mm, f: 1.8 6mm, f: 1.8 3.6mm, f: 2.0

View Angle H: 43 DegreeV: 33 Degree

H: 20-59 DegreeV: 15-46 Degree

H: 48 DegreeV: 33 Degree

H: 39 DegreeV: 29 Degree

H: 43 DegreeV: 33 Degree

H: 47 DegreeV: 36 Degree

Day & Night - Yes - Yes Yes -

Sensibility (Lux) 1.0 Lux 1.0 Lux 1.0 Lux 1.0 Lux 0.1 Lux 1.9 Lux

Image CompressionH.264 / M-JPEG

H.264 / MPEG-4 /

M-JPEG

H.264 / MPEG-4 /

M-JPEG

H.264 / MPEG-4 /

M-JPEG

H.264 / MPEG-4 /

M-JPEGM-JPEG

Max. Resolution

(Framerate)1600 x 1200 (15fps)

1280 x 720 (30fps)

720 x 240 (30fps)

1280 x 1024 (15fps)

1024 x 768 (15fps)

680 x 480 (30fps)

1280 x 1024 (15fps)

1024 x 768 (15fps)

680 x 480 (30fps)

1280 x 1024 (15fps)

1024 x 768 (15fps)

680 x 480 (30fps)

704 x 480 (30fps) 640 x 480 (30fps)

Audio Support Two-way,built-in mic Two-way Two-way,

built-in mic Two-way Two-way -

3GPP Yes Yes Yes Yes Yes -

RS-485 - Yes - Yes Yes -

DI / DO 2 / 1 1 / 1 - 1 / 1 1 / 1 -

SD Slot SD Card - - - - -

PoE IEEE802.3af IEEE802.3af IEEE802.3af IEEE802.3af IEEE802.3af -

Other - IP-66 with Vandal-Proof - IP-66 IP-66 -

PoE Power Device - IP Camera Product Matrix

Fast Ethernet PoE Switch

AC

IP Camera PoE Camera

Managment

AC

AC

PoE PoE PoE PoE

Power Line (AC)AC

100Base-TX UTP

PoE 100Base-TX UTP with PoE

IP CameraIP Camera

PowerBreakdown

Locations ofNo Power Socket

Locations ofUn-regulated Power Supply

ManagementPC

Non-Stop Operating via PoE System - Example on Surveillance System

X X

UPS

AC

Power over Ethernet14

Description IP Phone

Product

Series

Model ATA-150 / S VIP-156 / PE VIP-254T / PT VIP-255PT VIP-560PT

Product Image

Hardware Wireless Interface - - - - -

Ethernet Port (RJ-45) 1 LAN 2 LAN 2 LAN 2 LAN 2 LAN

PoE - - / IEEE 802.3af - / IEEE 802.3af IEEE 802.3af

FXS / FXO / PSTN (RJ-11) 1 FXS / 2 FXS 1 FXS - - -

LCD Display Base on Telephone 2 lines LCD 4 lines LCD 6 lines LCD

Backlight Screen Base on Telephone < < <

Microphone & Speaker Base on Telephone < < <

Voice

Features

SIP v2 (RFC 3261) < < < < <

SIP Account 2 3 3 1 4

Voice Lines 1 / 2 1 1 1 4

FoIP* T.38 - - -

VAD / CNG / Echo Cancellation < < < < <

Voice Codec G.711 u/a, G.723.1, G.726, G.729 a/b, GSM G.711 u/a, G.723.1, G.726, G.729 a/b, GSM

G.711 u/a, G.723.1, G.729 a/b, G.726

G.711 u/a, G.723.1, G.729 a/b, G.722

DTMF In-Band, Out-of-Band (RFC2833), SIP INFO

NAT Transversal STUN / Outbound STUN

Telephony

Features

3-Way Conference < < < < <

Caller ID < < < < <

Call Mute / Hold < < < < <

Call Waiting < < < < <

Call Forward / Transfer < < < < <

Do Not Disturb (DND) < < < < <

Phonebook < < < < <

Message Waiting Indicator (MWI) < < < < <

Auto-Provisioning < < < < <

Qos < < < < <

ToS/ Di#serv - - < < <

SNMP < - - - -

DHCP Server - < < - -

PPPoE / DHCP / Fixed IP Fixed IP, PF PoE, DHCP client

NAT Router - < < - -

Management Web, Keypad, Utility Web, Keypad

PoE Power Device - VoIP

PoE 100Base-TX UTP with PoE

Power On

Power On

Power On

Power On

6 Watts 6 Watts 12 Watts 12 Watts

Total consumed 36Watts / hr

PoE PoE PoE PoE

PM 05:00AM 08:00

Power Off

Power Off

Power Off

Power On

6 Watts 6 Watts 12 Watts 12 Watts

Save 24Watts / hr during off-business hours

PoE PoE PoE PoE

PM 05:00 AM 08:00

Total Saved = 10800Watts / month

PLANET PoE Schedule for Power Saving

POE-2400G POE-2400G

Pioneer of IP Innovation 15

PoE Power Device - WirelessDescription 802.11n Series MESH Series

Product

Series Model WNAP-1120PE WNAP-3000PE MAP-3100 MAP-3120 MAP-3020

Product Image

Wireless Standard IEEE 802.11b/g/n IEEE 802.11a/b/g

Max. Data Rate 300Mbps 54Mbps

Antenna 2 External Antenna 3 External Antenna 2 x Omni antenna, detachable Optional

Networking Interface 1 x LAN 1 x LAN(802.3af PoE / Gigabit) 1 x WAN, 4 x LAN 1 x Public

4 x LAN 1 x Public

1 x LAN

WLAN

Operating

Mode

Access Point < < < < <

AP Client < < - - -

Bridge < < < < <

WDS < - - - -

Repeater < < - - -

WLAN

Security64 / 128 Bit WEP < < < < <

WPA < < < < <

WPA2 < < < < <

WPS Support < < - - -

Functional

FeaturesMultiple SSID < < < < <

Filter MAC Filter MAC Filter < < <

DHCP Server < < < - -

WMM Support < < - - -

QoS - - < - -

PoE 100Base-TX UTP with PoE

No PoE Priority

Not critical mission PoE device Critical mission

PoE device

Over Loaded

Powered Not Powered

PoE PoE PoE PoE

PoE

With PoE Priority

Not critical mission PoE device Critical mission

PoE device

Over Loaded

Not Powered Powered

PoE PoE PoE PoE

PoE

PLANET PoE Priority for Critical Services - Example on VoIP System

PLANET reserves the right to change specification without prior notice. All brand names and trademarks are property of their respective owners.

@ PLANET Technology Corporation CS-POE0111