portable light systems -...

7
11 PORTABLE LIGHT SYSTEMS XL MICRO. THE LIGHTWEIGHT SOLUTION TO MULTIPHASE TRAFFIC CONTROL XLMicro provides a mobile baery powered 2 phase or 4 phase system comprising fixed signal heads, low consumpon dimming LED opcs, and the latest technology vehicle de- tecon. Compact, secure and totally silent when in operaon make these units the ideal choice for a wide range of traffic control applicaons. Code: S1XLMICRO XLITE. 2 PHASE RADIO LINKED TRAFFIC SIGNALS XLite is designed to provide a simple and safe traffic control soluon. Taking the develop- ment of the standard Masterhead concept further by ulising radio linked technology as featured in the XLRadiomaster range. These freestanding signals offer the flexibility of being transported in a small commercial vehicle or estate car. Code: S1XLITE TWO WAY RADIO Frequency range UHF 400-470MHz; 16 Channels; Battery capacity: 1500mAh; UK plug; CE certification available Updated USB cable: safer and more environment-friendly; Charge in the car without needing a mains voltage inverter Fast scan: One key to get and store all available channels around the area; Time saving in finding partner radios High/Low power selectable. Code: ELE-2WAYRADIO 600MM STOP/GO ELITE LOLLIPOP SIGN Code: SIG-RDS600STOPGOWOODEN

Upload: ngokhanh

Post on 05-Sep-2018

222 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: PORTABLE LIGHT SYSTEMS - Mallatitemallatite.co.uk/wp-content/uploads/Traffic-Management-Malletite.pdf · PORTABLE LIGHT SYSTEMS . XL MIRO. THE LIGHTWEIGHT SOLUTION TO MULTIPHASE TRAFFI

11

PORTABLE LIGHT SYSTEMS

XL MICRO. THE LIGHTWEIGHT SOLUTION TO MULTIPHASE TRAFFIC CONTROL XLMicro provides a mobile battery powered 2 phase or 4 phase system comprising fixed signal heads, low consumption dimming LED optics, and the latest technology vehicle de-tection. Compact, secure and totally silent when in operation make these units the ideal choice for a wide range of traffic control applications. Code: S1XLMICRO

XLITE. 2 PHASE RADIO LINKED TRAFFIC SIGNALS XLite is designed to provide a simple and safe traffic control solution. Taking the develop-ment of the standard Masterhead concept further by utilising radio linked technology as featured in the XLRadiomaster range. These freestanding signals offer the flexibility of being transported in a small commercial vehicle or estate car. Code: S1XLITE

TWO WAY RADIO

Frequency range UHF 400-470MHz; 16 Channels; Battery capacity: 1500mAh; UK plug; CE certification available Updated USB cable: safer and more environment-friendly; Charge in the car without needing a mains voltage inverter Fast scan: One key to get and store all available channels around the area; Time saving in finding partner radios High/Low power selectable.

Code: ELE-2WAYRADIO

600MM STOP/GO ELITE LOLLIPOP SIGN

Code: SIG-RDS600STOPGOWOODEN

Page 2: PORTABLE LIGHT SYSTEMS - Mallatitemallatite.co.uk/wp-content/uploads/Traffic-Management-Malletite.pdf · PORTABLE LIGHT SYSTEMS . XL MIRO. THE LIGHTWEIGHT SOLUTION TO MULTIPHASE TRAFFI

12

CONTRACTORS CONE

A two piece cone, with it’s centre manufactured from virgin HDPE, and base from

recycled PVC. The cone is 100% recyclable and is fitted with a high performance

prismatic sleeve.

750mm Code: TRA-CONCONT750

1m Code: TRA-CONCONT1000

CONES

MASTERCONE

One of the most practical two piece cones on the market. The Mastercone has been dominant on the roads for many years. Incorporating the Melba Swintex high perfor-mance prismatic Starlux™ sleeve, the Mastercone is highly visible to all motorists. 750mm weight 4.43kg 1m weight 7.5kg 750mm Code: TRA-CONMC750 1m Code: TRA-CONMC1000

BIGFOOT TRAFFIC CONE The Bigfoot Cone is long established as the industry leader for Traffic Cones. It was the first two piece cone to be manufactured, and is the benchmark for Traffic Cones all over the world. The cone base is manufactured from recycled material, and can be coloured on request. 750mm weight 4.62kg 1m weight 8.1kg 750mm Code: TRA-CON75 1 meter Code: TRA-CON100

EN13422 CONE SLEEVES Replacement cone sleeves

1M Code: TRA-CONSLEBIG1M 750MM Code: TRA-CONSLEBIG75CM

500MM NO WAITING CONE

No waiting logo sleeve applied to all three sides. Manufactured using flexible

compound deal for parking control on the road or at events Code: TRA–NOWAITING

450MM CONICAL NO WAITING CONE Manufactured in one piece from recycled thermoplastic. No Waiting Cone c/w No Waiting Sleeve as standard. Embossed and coloured base available. Code: TRA-CONNOYELTRI

Page 3: PORTABLE LIGHT SYSTEMS - Mallatitemallatite.co.uk/wp-content/uploads/Traffic-Management-Malletite.pdf · PORTABLE LIGHT SYSTEMS . XL MIRO. THE LIGHTWEIGHT SOLUTION TO MULTIPHASE TRAFFI

13

CONE LIGHTS, TRAFFIC BEACONS

NISSEN CONILAMP AMBER 6V SOLAR SWITCH

• Single 6V battery LED Lamp with automatic switch

• Built-in solar switch for daytime energy saving

• Quick and easy deploy; no keys or tools required

• Integrated cone bracket for firm cone grip

• Long operating times with min. power consumption (up to 400 hrs)

Code: TRA-LAMHIGHLIGHT

LED SLIM BARLITE BEACON AMBER WARRIOR LED 12V / 24V Lightbar with twin, round, secure magnetic attachments. It comes with a 2.4m cable with cigarette lighter plug. 8 flash patterns. EMC Tested. CE marked. Code: ELE-BEABRITAX

NISSEN CONI-TAPER LAMPS

• LED sequential lamp with automatic switch on when cone mounted

• Each single battery lamp is fitted with a Super LED.

• A static amber backup light stays on during the sequential flash to provide continuous

guidance to motorists at night

• Long operating times (up to 125 hours on a standard 6v battery)

• Sold in 10

Code: TRA-LAM001

6V TYPE BATTERY

• HIGH POWER battery Premium 800, 6 V, 7 Ah

• Ecologically battery without mercury and cadmium

• Suitable for all weather conditions, incl. winter • Suitable for use in road danger lamps, sequential lamps, warning lamps and any other type of lamp requiring 6 V battery Code: BAT-BAT996

SPRINGBACK SEALBRITE POST

Moulded post with integral shock cord device allows post to revert to upright after impact. Comes complete with conforming Sealbrite Sleeve. Ideal for delineating traffic in areas such as airports, car parks, docksides etc.

750mm Code: TRA-SPRINGBACK

GLOPOST SEALBRITE POST

Blow moulded from UV stabilised low density polyethylene. Specific twist-lock de-signed base to suit either permanent metal cats eye sockets or temporary base. Fitted with BS873: Part 6 Des 2 Sleeve, Suitable for use with UniBase. 750mm Code: TRA-CON75KINGPIN 1m Code: TRA-CON1MKINGPIN

UNIBASE AND GLUEMATS For use with SpringBack cylinders. Manufactured from 100% recycled PVC. Can be posi-tioned utilising either bitumen ‘Glue Mats’ or with asphalt or concrete fixing bolts. De-signed to accept ‘GloPosts’ and other manufacturers cylinders. Unibase Code: TRA-CONCATBASE Glue mat Code: TRA-CONCARBASEPAD

Page 4: PORTABLE LIGHT SYSTEMS - Mallatitemallatite.co.uk/wp-content/uploads/Traffic-Management-Malletite.pdf · PORTABLE LIGHT SYSTEMS . XL MIRO. THE LIGHTWEIGHT SOLUTION TO MULTIPHASE TRAFFI

14

SPEED CONTROL

JUMBO SPEED RAMPS

An exceptionally tough speed ramp made from 100% recycled material, that is available in two heights, 50mm and 75mm 500mm x 400mm for 10mph and 4mph zones respectively.

4mph Code: TRA-SPEEDBUMP

10mph Code: TRA-SPESWINTEXY

JUMBO END CAPS An exceptionally tough speed ramp made from 100% recycled material, that is available in two heights, 50mm and 75mm for 4mph and 10mph zones respectively. Please specify colour required (yellow/black). 4mph Code: TRA-SPEEDBUMPEND 10mph Code: TRA-SPESWINTEXYEND

ASPHALT FIXING BOLTS Bolts for fixing Jumbo™ Ramps to asphalt.. Sold each. Code: TRA-SPEEDBOLT

GUARDIAN GOAL POSTS Collapsed length: 1.8 Meters Extended length:7.3 Meters Tube sizes:50mm diameter base section Weight: 3.5 kg Per Pole Sections: Five red and white UV tolerant Code: S1GS6

Page 5: PORTABLE LIGHT SYSTEMS - Mallatitemallatite.co.uk/wp-content/uploads/Traffic-Management-Malletite.pdf · PORTABLE LIGHT SYSTEMS . XL MIRO. THE LIGHTWEIGHT SOLUTION TO MULTIPHASE TRAFFI

15

BARRIERS

FRONTIER BARRIER Manufactured from UV stabilised impact modified HDPE. The design process was carried out in tandem with leading UK contractors to maximise wind flow through and around the system for unbeatable stability. Tested to ensure wind stability classes within BS8442 are achieved. 40 per pallet. Code: TRA-BARJSP

TITAN BARRIER Recognised and well established stacking barrier from JSP, it has all the usual ad-vantages of standard stackable systems but in addition has many unique features. Titan® has undergone modifications to further improve longevity and to meet the proposed NRSWA changes effecting wind stability, set out in BS8442 when erected and assembled correctly. 40 per pallet. Code: TRA-BARTITAN

GATE BARRIER The Gate is one of the most popular blow moulded barriers. This superior blow moulded HDPE barrier offers superb quality at a low life cost. Conforms to requirements of BSEN8442 . 40 per pallet. Code: TRA-BARGATE

TUFF STACCA MK4 BARRIER The Tuff Barrier is a stylish, tough and durable barrier. Incorporating the Q-Clip, the barriers connect together in a linear row, When combined with the Cross-Trench support, the barriers become highly wind resistant. Conforms to requirements of BSEN8442 . 40 per pallet. Code: TRA-BARSTACCA

AVALON BARRIER

The Avalon Chapter 8 Pedestrian Safety Barrier provides both stability and

security with its Hi-Viz foot and innovative lockable connector. Easy to use and

transport, this long-lasting and robust plastic barrier can be used in many applications, for example in-door and out-door events, construction, excavation, street works, etc. Code: TRA-BAROMEGA

Page 6: PORTABLE LIGHT SYSTEMS - Mallatitemallatite.co.uk/wp-content/uploads/Traffic-Management-Malletite.pdf · PORTABLE LIGHT SYSTEMS . XL MIRO. THE LIGHTWEIGHT SOLUTION TO MULTIPHASE TRAFFI

16

BARRIER ACCESSORIES

BALLAST TRAY • Avalon Barrier Passes Wind Loading Class B when fitted with 2 Fence feet or 37kg of spoil • Clips onto Barrier • Does not protrude into workspace Code: TRA-BAROMEGA

APOLOGY BOARD Made to order with your company logo Suitable to fit any barrier. Code: S1APOLOGY

ROAD ROCK The Road Rock is a multifunctional base and the first product of its kind that will allow a temporary pedestrian barrier to pass Class B Wind Speeds (17.6m/s) by providing the precise weight needed each time, using two Road Rocks. When the barriers are in a boxed formation, only a single Road Rock is needed per barrier to pass Class B. Use of the Road Rock removes the need for sandbag filled ballasts, therefore resulting in a cleaner area of works Code: TRA-ROADROCK

REFLECECTIVE ROADBLOC Stacks of 20 RoadBlocs™ supplied securely banded. each Bloc features interlocking feet which allow the units to be stacked efficiently without the risk of them sliding apart, helping prevent pedestrian/worker accidents. Code: S1ROADBLOC

Page 7: PORTABLE LIGHT SYSTEMS - Mallatitemallatite.co.uk/wp-content/uploads/Traffic-Management-Malletite.pdf · PORTABLE LIGHT SYSTEMS . XL MIRO. THE LIGHTWEIGHT SOLUTION TO MULTIPHASE TRAFFI

17

TRENCH COVERS

TRENCH COVER 1200X 800 - YELLOW

A versatile trench cover that is exceptionally rigid in construction, yet lightweight. This

sturdy glass reinforced composite cover maintains performance in the most demanding

situations. 1200 x 800 is suitable for trenches up to 700mm wide. 1200mm x 800mm Code: TRE-TRE001 1600mm x 1220mm Code: TRA-TRESBUILD

SAFETY KERB RAMP - YELLOW Ramp provides a safe means for wheelchair and pushchair users to reach the next level

when a footpath has been closed for street works.

Code: TRA-TRE002

ROAD PLATE Road Plate is a modular system with individual units linked together. There’s no need for expensive specialist lifting equipment as the road plate weighs only 42kg and can be installed in minutes with a two man lift. No crane needed. The anti-slip surface provides secure pedestrian access and the innovative flexible edge dampens any unwanted sounds. Road Plate is ideal in residential areas. - Should be bolted for carriageway use. Plate Code: TRA-TRE003 End Piece Code: TRA-TRE003.1

TRENCH COVER WITH AN INNOVATIVE FLEXI-EDGE SYSTEM

This trench covert greatly reduces trip hazards for pedestrians. The underside and edge

of the Oxford Low Pro are made from a soft flexible material which grips the surface

underneath the board and helps to reduce any unwanted movement as it is anti-slide,

non—pinned and self-weighted. Its innovative design reduces installation time as there

is no need to bolt the product down, but is still very stable.

Heavier that traditional trench covers thanks to its PVC anti slip edge. Takes up any cambers in the pavement. LowPro 11/11 covers a 700mm trench. LowPro 12/8 covers a 700mm trench. LowPro 15/10 covers a 900mm trench Gas Vents and Probe Hole designed into product. Long lasting product - Flexible edges can be replaced. Quick installation - does not need to be bolted down

LOWPRO11/11 1125 X 1125mm - Code: S1TRELP11/11

LOWPRO 12/8 1200 x800mm - Code: S1TRELP12/8

LOWPRO 15/10 1500 X 1000mm - Code: S1TRELP15/10