Energize your cable—Extend Ethernet & Power over Ethernet (PoE) using existing twisted pair(s) or coax.Benefit instantly from the power and flexibility of IP without downtime or infrastructure and installation expenses!

Ethernet Extension Extends 10/100Base-TX Ethernet over3,000 feet using 2-wire, 24-AWG twisted-pair, Cat 3, Cat 5e/6/7, or coaxial cable.

Delivers PoE PowerPlus technology powers up both theremote CopperLink extender and the PoEenabled device connected to it. No poweris required at the remote location.

Transparent LAN BridgingPasses higher layer protocols, including802.1Q VLAN tagged and untagged pack-ets. Fully transparent to various video com-pression schemes such as WMV, MPEG-4and MJPEG.

Plug and PlayModems need no configuration to operate,Ethernet ports are auto-sensing 10/100, fullor half-duplex.

PoE EthernetExtenderCopperLink Model 1101

With global expansion of theInternet of Things (IoT),demand for IP/Ethernet-

connected devices is soaring. Billionsof devices are already capable of con-necting to the Internet. Ethernet—andpower-over-Ethernet (PoE) in particu-lar—has grown in popularity becauseit strikes the perfect blend of speed,cost, and ease of use.

Ethernet, however, presents a fewdrawbacks that may overshadow thebenefits by creating escalating infra-structure costs and system downtime.The Ethernet standard specifies a dis-tance limitation of 328 ft (100 m), whichrestricts location options for deviceinstallation. Standard Ethernet alsorequires Cat 5 cabling or better, whichoften leads to installing new cablinginfrastructure—involving tearing intowalls, ceilings, pavement, and worse.

The CopperLink 1101 kit from Pattonenables Ethernet connectivity over pre-viously installed copper infrastructure.The solution breathes new life into cir-cuits previously deployed for such tradi-tional non-IP applications as RS232/485controls, alarms, CCTV, analog phones,intercom speakers, and others.

Instantaneously install PoE-compliantdevices such as wireless access points(WAPs), IP cameras, IP telephones, IPdoor stations, HVAC controls, andmore—with no additional overheadcost. With the extended reach theCL1101 kit provides, you can install yourIP terminal equipment exactly where youwant it! Flexibility of device location isparamount in such applications asbuilding security, where increasedperimeter dimension and expandedspot coverage area are critical.

Check out more of Patton’s award winning Ethernet Extension solutions at

www.patton.com/ethernet-extender

Extend Power and Ethernet to compliant or legacy PoEdevices using already installed twisted-pair cable or coax

CopperLink™ Model 1101 PoE Ethernet Extender

Line Interfaces (Data) 1 x RJ45 (Optional: TerminalBlock, Coax)Supports 1-4 pairs

Ethernet Interfaces 1 x RJ45 Auto-Sensing10/100Base-TX with full orhalf-duplex operation

LEDs Power, Line, (10 or 100 opera-tion), Eth, and PoE

Protocol Transparent to high layer proto-colSupports 802.1Q VLAN taggedframes

Transparent to IP videoschemesFully transparent to compres-sion schemes such as WMV,MPEG-4, and MJPEG

Power Injection (PSE only)DC voltage on Ethernet port54 VDC

Power Consumption 1.5 W

Power Supply External AC Adapter100–240 VAC to 54 VDCInput: 30–57 VDC(Recommended 54 VDC)

EnvironmentTemperature: 0 to 50°C (standard)Humidity: 10 to 95% (non-condensing)

Physical0.71 H x 1.1 W x 2.56 D in.(18 H x 28 W x 65 D mm)0.78 oz (22 g)

MTBF83,043 hours

ComplianceFCC Part 15A, Class BCE MarkEMC Directive 89/336/EECLVD Directive 73/23/EEC

Specifications*

07MCL1101-DS3

Patton is a registered trademark, and is a trademark of Patton ElectronicsCompany in the United States and other countries.

Patton Hungary ZrtGábor Dénes utca 4., Infopark Building CBudapest H-1117, HungaryPhone +36 1 439 4840Fax +36 1 439 4844E-mail ce@patton.comWeb www.patton.com

Patton Electronics Co. 7622 Rickenbacker DriveGaithersburg, Maryland 20879, USAPhone +1 301 975 1000Fax +1 301 869 9293E-mail sales@patton.comWeb www.patton.com

Patton-Inalp Networks AG Meriedweg 7CH-3172 Niederwangen, SwitzerlandPhone +41 (31) 985 25 25Fax +41 (31) 985 25 26E-mail sales@inalp.comWeb www.inalp.com

* Specifications subject to change without notice.