pneumatic connectors, pneumatic tubing & …...pneumatic 1.4 for detailed information see...
TRANSCRIPT
2190 GB-ca
Pneumatic Connectors,Tubing & CylinderControl Accessories
Pneumatic
Pneumatic 1.2
Index
Page No
Push-in Fittings Overview 1.3 - 1.7
Push-in Fittings 1.8 - 1.22
Push-in Fitting Dimensions 1.23 - 1.47
Cylinder Control Accessories 2.1 - 2.27
Flexible Pneumatic Tubing Overview 3.1 - 3.3
Nylon Tubing 3.4 - 3.6
Polyurethane Tubing 3.7 - 3.9
Tubing Accessories 3.10
Exhaust Silencers Overview 4.1 - 4.3
Exhaust Silencers 4.4 - 4.9
Pneumatic 1.3
For tube Ø mm 3-6 4-14 4-14 Refer to page
Threads Metric M3x0,5-M5x0,8 M5x0,8 M5x0,8BSPP 1/8, 1/4 1/8-1/2 1/8-1/2BSPT 1/8, 1/4 1/8-1/2 1/8-1/2
Material, body
- Plastic
- Brass (nickel plated)
Stud fittings 8 - 9
Threaded 90° Elbows 10 - 11
Threaded Tee's 12 - 13
Threaded Y-connectors 14 - 15
Threaded Multiple Fittings 14 - 15
Tube to Tube Straight Unions 16
Tube to Tube 90O Elbows 16
Tube to Tube Tee's 16
Tube to Tube Y-connectors 17
Tube to Tube Multiple Tee's 17
Reducers 18
Expanders 18
Plugs 18
Unions 18
Indicators 18
Plug-in 90O Elbow 19
Plug-in Tee's 19
Plug-in Y-connectors 19
Bulkhead Fittings 20
Manifolds 20
Banjo's 21
Protective Caps 22
Prestolok Micro Prestolok 2 Prestolok
Prestolok Fittings
Pneumatic 1.4
For detailed information see technical leaflet
Prestolok Micro Prestolok 2 Prestolok
Working pressure 0,01 to 16 bar 0,01 to 25 bar 0,01 to 25 barWorking temperature -25 °C to +80 °C -25 °C to +70 °C -25 °C to +100 °C
Ordering information
Prestolok fittings are sold in packs. The package quantities are indicated adjacent to the part numbers.When ordering, order by the quantity required. For example : to obtain 20 Prestolok 2 Equal Union 4mm Tees,purchase order should state:-
Qty 20 JPK4NoteOrders received for Prestolok fittings in quantities other than pack quantity multiples will be rounded up to the nearestmultiple
Prestolok Fittings
Prestolok Micro
• High resistance polyamide body
• Stud fittings brass nickle plated
• Miniature Fittings with full flow capacity
• Teflon coated BSPT threads
• Face seal with BSPP threads
• Positive hold with stainless steel grab ring
• Push button tube release
• For nylon or polyurethane tube
Operating information
Prestolok 2
• High resistance polyamide body
• Stud fittings brass nickle plated
• Protective cap
• Ready-to-use fitting
• Posititive hold by a flexible grab ring
• Positive O-ring sealing
• Plastic push button
Prestolok
• Brass nickel plated body
• Use with plastic or metal tubing
• Positive hold by a flexible stainless steel grab ring
• Ready-to-use fitting
• Plastic push button
• Straight male connectors with internal hexagon
Pneumatic 1.5
Prestolok Micro Fittings
Advantages
Perfect miniaturisation.
The Prestolok Micro concept offers :• an ergonomic shape with small
dimensions but allowing forexcellent handling and manipulationof the fitting,
• compact dimensions allowefficient utilisation in applicationswhere space is a decisive factor,
• reduced size and weight which, arevery important when used withunsupported pipe runs,
• excellent flow characteristics giveminimal pressure drop.
A multi-functional push-button.• the new push button design
encapsulates the fitting body toprevent contamination of theconnection system,
• the profile of the push buttonenables simple and efficientdisconnection of the tube,
• the marking of the tube diameterand the optional choice of colour onthe push button enable simpleidentification of circuits,
• it ensures a uniform distribution ofthe pushing force for easydisconnection.
• the one piece design makes thepush button unlosable.
Ready to use fitting
• the Prestolok Micro range of fittingsis manufactured ready to use,saving time and reducing assemblycosts,
• taper threads are treated with aspecial Parker Teflon Coating (PTC).This factory applied treatmentenables the fitting to be connectedand disconnected up to five timeswithout additional treatment,
• fittings with parallel threads aresupplied with a pre-assembled fullyretained O-ring ensuring a perfectseal.
Wide product range suitable for all applications.Full flow capacity.
Positive retention with a flexiblegrab ring.
• this system, invented, developed andperfected by Parker, guaranteesexcellent tube retention,
• the special radial shape of the teethof the grab ring do not damage thetube or affect the sealing,
• the elasticity of the grab ring absorbsall vibration and impulsing,
• the design of the grab ring allowsthe tube to rotate freely even underpressure.
High resistance polyamide body.
The use of high resistance polyamideoffers :• Excellent mechanical characteristics
(robustness),• High corrosion resistance,• UV resistant polymers gurarantee a
long service life.
Mounting holes on shaped fittings.
On request, union connectors can besupplied equipped with mounting holes.This option permits :• Mounting in banks for compact
installations and simplified pipework,• Facility for mounting on frames or
panels,• Greater flexibility and additional
space saving.
Pneumatic 1.6
Advantages
Ready-to-use compact fittingWide product range covering all applicationsFull flow capability
Protective capThe design of the Prestolok 2 thermo-plastic range permits the use of aprotective cap for the followingfunctions :• protection : prevents the ingress
of dirt into the connection system,• safety : eliminates the risk of
accidental disconnection, as thepush-button is made inaccessible,
• identification :• colour coding allows identification
of fluid lines,• tube sizes are marked on the
protective cap.
High resistance polyamide bodyThe use of UV-resistant reinforcedpolyamide provides :• weight saving,• excellent mechanical performance,• compact design.The three grooves facilitate handlingand positioning of elbows and tees.A long service life is ensured by thecorrosion free body material.
Positive hold by a flexible grab ring• The special shape of the radial teeth
grab ring prevents longi-tudinalscratch marks on the tube.
• The elasticity of the grab ringabsorbs vibration and pulsatingpressure.
• A twist-free assembly, the tube canrotate freely even under pressure.
Positive O-ring sealing• The smooth unmarked tube is in
direct contact with the nitrileO-ring, giving a positive seal.
• A unique back-up washer retainsthe O-ring in the optimum sealingposition, protects it from the grabring, and prevents extrusionunder pressure.
Ready-to-use fittingThe Prestolok thermoplastic range ismanufactured with brass nickelplated male threads ready for use :• parallel threads are supplied with
a pre-assembled, fully retainedO-ring seal,
• taper threads are treated with aspecial Parker Teflon® Coating(PTC) for self sealing onassembly, reusable up to fivetimes without additional sealingmaterial.
Plastic push button• Simple manual pressure on the user-
friendly push button allows instantdisconnection of the tube.
• Tube sizes are marked on the pushbutton for easy identification.
Assembly• Cut the tube square• Insert the tube into the fitting until it bottoms
Disassembly• Simply press on the push button and withdraw the tube
How to use
Prestolok 2 Fittings
Pneumatic 1.7
Advantages
Compact ready-to-use fittingWide product range covering all applicationsFull flow capability
Brass nickel plated bodyBrass is a raw material providing :
• robustness,• excellent shock resistance,• good temperature capability,• excellent spark resistance.
Nickel plating gives improvedcorrosion resistance and a brightappearance which does notdeteriorate.
Use with plastic or metal tubingPrestolok is a high performancepush-in fitting. Designed for usewith most types of plastic tubing(polyamide, polyurethane,polyethylene, Pebax, Teflon...), thishigh performance fitting can alsobe used with copper tubing*conforming to DIN 1786, NFA51-120, BS 2871 Part 2 (tolerance+0.05 mm). For steel, stainless steeltubing or other raw material, pleasecontact your Parker sales engineer.* Tube must be cut square and correctly deburred.
Ready-to-use fittingThe Prestolok range is manufacturedwith brass nickel plated male threadsready for use :• parallel threads are supplied with a
preassembled, fully retained O-Ringseal,
•taper threads are treated with aspecial Parker Teflon® Coating(PTC) for self sealing on assembly,re-usable up to five times withoutadditional sealing material.
Straight male connectors withinternal hexagon•The internal hexagon allowsvertical mounting with the use ofan Allen key. Because the internalhexagon does not go completelythrough the fitting, the fittingcannot slip down the Allen keyduring assembly.
•The lack of external hexagongives a significant reduction inthe overall dimensions enablingclose mounting of these fittings togive very compact installations.
Positive hold by a flexible stainlesssteel grab ring• The special shape of the radial teeth
of the grab ring prevents longitudi-nal scratch marks on the tube.
•The elasticity of the grab ring absorbsvibration and pulsating pressure.
• A twist-free assembly, the tube canrotate freely even under pressure.
Plastic push button•Simple manual pressure on the user-friendly push button allows instantdisconnection of the tube.
•Tube sizes are marked on the pushbutton for easy identification.
How to use
Assembly• Cut the tube square (and correctly deburred for copper)• Insert the tube into the fitting until it bottoms
Disassembly• Simply press on the push button and withdraw
the tube
Prestolok Fittings
Pneumatic 1.8
BSPP and Metric Stud Fittings
Male connector - metric straight thread
Tube Thread Pack MetalØ1 B Qty Order code
3 M3x0,5 10 F28PMB3M3
3 M5x,0,8 10 F28PMB3M5
4 M3x,0,5 5 F28PMB4M3
4 M5x,0,8 10 F28PMB4M5
6 M5x,0,8 10 F28PMB6M5
B1
Male connector - BSPP
Tube Thread Pack MetalØ1 B Qty Order code
4 1/8 10 F4PMB4-1/84 1/4 10 F4PMB4-1/46 1/8 10 F4PMB6-1/86 1/4 10 F4PMB6-1/48 1/8 10 F4PB8-1/88 1/4 10 F4PB8-1/48 3/8 10 F4PB8-3/8
10 1/4 10 F4PB10-1/410 3/8 10 F4PB10-3/810 1/2 10 F4PB10-1/212 1/4 10 F4PB12-1/412 3/8 10 F4PB12-3/812 1/2 10 F4PB12-1/214 3/8 10 F4PB14-3/814 1/2 10 F4PB14-1/2
1 B
Female - metric
1 B
Female connector - BSPP
4 1/8 10 G4PMB4-1/84 1/4 10 G4PMB4-1/46 1/8 10 G4PMB6-1/86 1/4 10 G4PMB6-1/48 1/8 10 G4PB8-1/88 1/4 10 G4PB8-1/4
1 B
Tube Thread Pack MetalØ1 B Qty Order code
Male connector - metric straight thread
Tube Thread Pack MetalØ1 B Qty Order code3 M3x0,5 10 F8PMB3M33 M5x,0,8 10 F8PMB3M54 M3x,0,5 10 F8PMB4M34 M5x,0,8 10 F8PMB4M56 M5x,0,8 10 F8PMB6M5
1 B
For dimensions see page
Prestolok Micro page 23 to 30
Prestolok 2 page 31 to 39
Prestolok page 40 - 47
3 M3x0,5 10 G8PMB3M33 M5x0,8 10 G8PMB3M54 M3x0,5 10 G8PMB4M34 M5x0,8 10 G8PMB4M5
Tube Thread Pack MetalØ1 B Qty Order code
Pneumatic 1.9
BSPT Stud Fittings
Male connector - BSPT
Tube Thread Pack MetalØ1 A Qty Order code
4 1/8 10 F3PMB4-1/84 1/4 10 F3PMB4-1/46 1/8 10 F3PMB6-1/86 1/4 10 F3PMB6-1/48 1/8 10 F3PB8-1/88 1/4 10 F3PB8-1/48 3/8 10 F3PB8-3/4
10 1/4 10 F3PB10-1/410 3/8 10 F3PB10-3/810 1/2 10 F3PB10-1/212 1/4 10 F3PB12-1/412 3/8 10 F3PB12-3/812 1/2 10 F3PB12-1/214 3/8 10 F3PB14-3/814 1/2 10 F3PB14-1/2
1 A
Male connector - BSPT
Tube Thread Pack MetalØ1 A Qty Order code
3 1/8 10 F23PMB3-1/8
4 1/8 10 F23PMB4-1/8
6 1/8 10 F23PMB6-1/8
6 1/4 10 F23PB6-1/4
8 1/8 10 F23PB8-1/8
8 1/4 10 F23PB8-1/4
A1
For dimensions see page
Prestolok Micro page 23 to 30
Prestolok 2 page 31 to 39
Prestolok page 40 - 47
Pneumatic 1.10
Compact adjustable male elbow - BSPPTube Thread Pack Plastic MetalØ1 B Qty Order code Order code
4 1/8 10 C64SPK4-1/8 C64SPB4-1/84 1/4 10 C64SPK4-1/46 1/8 10 C64SPK6-1/8 C64SPB6-1/86 1/4 10 C64SPK6-1/4 C64SPB6-1/48 1/8 10 C64SPK8-1/8 C64SPB8-1/88 1/4 10 C64SPK8-1/4 C64SPB8-1/48 3/8 10 C64SPK8-3/8 C64SPB8-3/810 1/4 10 C64SPB10-1/410 3/8 10 C64SPB10-3/812 1/4 10 C64SPB12-1/412 3/8 10 C64SPB12-3/812 1/2 10 C64SPB12-1/2
1
B
Adjustable male elbow - metric straight threadTube Thread Pack Plastic MetalØ1 B Qty Order code Order code
3 M3x0,5 10 C68PMK3M33 M5x0,8 10 C68PMK3M54 M3x0,5 10 C68PMK4M34 M5x0,8 10 C68PMK4M5 C68PB4M56 M5x0,8 10 C68PMK6M5 C68PB6M5
1
B
Adjustable male elbow - BSPPTube Thread Pack Plastic MetalØ1 B Qty Order code Order code4 1/8 10 C64PMK4-1/8 C64PB4-1/84 1/4 10 C64PMK4-1/4 C64PB4-1/46 1/8 10 C64PMK6-1/8 C64PB6-1/86 1/4 10 C64PMK6-1/4 C64PB6-1/48 1/8 10 C64PK8-1/8 C64PB8-1/88 1/4 10 C64PK8-1/4 C64PB8-1/48 3/8 10 C64PK8-3/8 C64PB8-3/810 1/4 10 C64PK10-1/4 C64PB10-1/410 3/8 10 C64PK10-3/8 C64PB10-3/812 1/4 10 C64PK12-1/4 C64PB12-1/412 3/8 10 C64PK12-3/8 C64PB12-3/814 3/8 10 C64PK14-3/8 C64PB14-3/814 1/2 10 C64PK14-1/2 C64PB14-1/2
1
B
Compact adjustable male elbow - metric straight threadTube Thread Pack Plastic MetalØ1 B Qty Order code Order code
4 M5x0,8 10 C68SPK4M5 C68SPB4M5
1
B
Adjustable extended male elbow - BSPP
BSPP and Metric Elbows
Tube Thread Pack PlasticØ1 B Qty Order code
4 1/8 10 C64LPMK4-1/8
4 1/4 10 C64LPMK4-1/4
6 1/8 10 C64LPMK6-1/8
6 1/4 10 C64LPMK6-1/4
1
B
For dimensions see page
Prestolok Micro (Plastic) page 23 to 30
Prestolok 2 (Plastic) page 31 to 39
Prestolok (Metal) page 40 - 47
Pneumatic 1.11
Compact elbow - BSPT
Adjustable male elbow - BSPT
Tube Thread Pack MetalØ1 A Qty Order code
Tube Thread Pack Plastic MetalØ1 A Qty Order code Order code3 1/8 10 C63PMK3-1/84 1/8 10 C63PMK4-1/8 C63PB4-1/84 1/4 10 C63PMK4-1/4 C63PB4-1/46 1/8 10 C63PMK6-1/8 C63PB6-1/86 1/4 10 C63PMK6-1/4 C63PB6-1/48 1/8 10 C63PK8-1/8 C63PB8-1/88 1/4 10 C63PK8-1/4 C63PB8-1/48 3/8 10 C63PK8-3/8 C63PB8-3/810 1/4 10 C63PK10-1/4 C63PB10-1/410 3/8 10 C63PK10-3/8 C63PB10-3/810 1/2 10 C63PK10-1/212 1/4 10 C63PK12-1/4 C63PB12-1/412 3/8 10 C63PK12-3/8 C63PB12-3/812 1/2 10 C63PK12-1/2 C63PB12-1/214 3/8 10 C63PK14-3/8 C63PB14-3/814 1/2 10 C63PK14-1/2 C63PB14-1/2
Compact adjustable male elbow - BSPTTube Thread Pack PlasticØ1 B Qty Order code4 1/8 10 C63SPK4-1/84 1/4 10 C63SPK4-1/46 1/8 10 C63SPK6-1/86 1/4 10 C63SPK6-1/48 1/8 10 C63SPK8-1/88 1/4 10 C63SPK8-1/48 3/8 10 C63SPK8-3/810 1/4 5 C63SPK10-1/410 3/8 5 C63SPK10-3/810 1/2 5 C63SPK10-1/2
4 1/8 10 C3PB4-1/86 1/8 10 C3PB6-1/86 1/4 10 C3PB6-1/48 1/8 10 C3PB8-1/88 1/4 10 C3PB8-1/410 1/4 10 C3PB10-1/410 3/8 10 C3PB10-3/812 3/8 10 C3PB12-3/812 1/2 10 C3PB12-1/214 3/8 10 C3PB14-3/814 1/2 10 C3PB14-1/2
1
A
1
A
1
A
Adjustable extended male elbow - BSPT
1
M
N
P
A
C
C4
PTC
Threads are treated with Parker Teflon®
Coating (PTC) sealing material
BSPT Elbows
Tube Thread Pack Plastic MetalØ1 B Qty Order code Order code4 1/8 10 C63LPK4-1/8 C63LPB4-1/84 1/4 10 C63LPK4-1/4 C63LPB4-1/46 1/8 10 C63LPK6-1/8 C63LPB6-1/86 1/4 10 C63LPK6-1/4 C63LPB6-1/48 1/8 10 C63LPK8-1/8 C63LPB8-1/88 1/4 10 C63LPK8-1/4 C63LPB8-1/4
For dimensions see page
Prestolok Micro (Plastic) page 23 to 30
Prestolok 2 (Plastic) page 31 to 39
Prestolok (Metal) page 40 - 47
Pneumatic 1.12
Adjustable male run tee - BSPP
1
B
Adjustable male run tee - metric straight thread
3 M3x0,5 10 R68PMK3M33 M5x0,8 10 R68PMK3M53 M3x0,5 10 R68PMK4M34 M5x0,8 10 R68PMK4M5 R68PB4M56 M5x0,8 10 R68PMK6M5 R68PB6M5
1
B
Adjustable male branch tee - BSPP
1
B
Adjustable male branch tee - metric straight thread
1
B
BSPP and Metric Tee Fittings
Tube Thread Pack Plastic MetalØ1 B Qty Order code Order code
4 1/8 10 R64PMK4-1/8 R64PB4-1/84 1/4 10 R64PMK4-1/4 R64PB4-1/46 1/8 10 R64PMK6-1/8 R64PB6-1/86 1/4 10 R64PMK6-1/4 R64PB6-1/48 1/8 10 R64PK8-1/8 R64PB8-1/88 1/4 10 R64PK8-1/4 R64PB8-1/48 3/8 10 R64PK8-3/8 R64PB8-3/810 1/4 10 R64PK10-1/4 R64PB10-1/410 3/8 10 R64PK10-3/8 R64PB10-3/812 1/4 10 R64PK12-1/4 R64PB12-1/412 3/8 10 R64PK12-3/8 R64PB12-3/814 3/8 5 R64PK14-3/8 R64PB14-3/814 1/2 5 R64PK14-1/2 R64PB14-1/2
Tube Thread Pack Plastic MetalØ1 B Qty Order code Order code
3 M3x0,5 10 S68PMK3M33 M5x0,8 10 S68PMK3M54 M3x0,5 10 S68PMK4M34 M5x0,8 10 S68PMK4M5 S68PB4M56 M5x0,8 10 S68PMK6M5 S68PB6M5
Tube Thread Pack Plastic MetalØ1 B Qty Order code Order code
4 1/8 10 S64PMK4-1/8 S64PB4-1/84 1/4 10 S64PMK4-1/4 S64PB4-1/46 1/8 10 S64PMK6-1/8 S64PB6-1/86 1/4 10 S64PMK6-1/4 S64PB6-1/48 1/8 10 S64PK8-1/8 S64PB8-1/88 1/4 10 S64PK8-1/4 S64PB8-1/48 3/8 10 S64PK8-3/8 S64PB8-3/810 1/4 10 S64PK10-1/4 S64PB10-1/410 3/8 10 S64PK10-3/8 S64PB10-3/812 1/4 5 S64PK12-1/4 S64PB12-1/412 3/8 10 S64PK12-3/8 S64PB12-3/814 3/8 5 S64PK14-3/8 S64PB14-3/814 1/2 5 S64PK14-1/2 S64PB14-1/2
Tube Thread Pack Plastic MetalØ1 B Qty Order code Order code
For dimensions see page
Prestolok Micro (Plastic) page 23 to 30
Prestolok 2 (Plastic) page 31 to 39
Prestolok (Metal) page 40 - 47
Pneumatic 1.13
Adjustable male run tee - BSPT
1
A
Adjustable male branch tee - BSPT
1
A
BSPT Tee Fittings
3 1/8 10 R63PMK3-1/84 1/8 10 R63PMK4-1/8 R63PB4-1/84 1/4 10 R63PMK4-1/4 R63PB4-1/46 1/8 10 R63PMK6-1/8 R63PB6-1/86 1/4 10 R63PMK6-1/4 R63PB6-1/48 1/8 10 R63PK8-1/8 R63PB8-1/88 1/4 10 R63PK8-1/4 R63PB8-1/48 3/8 10 R63PK8-3/8 R63PB8-3/810 1/4 10 R63PK10-1/4 R63PB10-1/410 3/8 10 R63PK10-3/8 R63PB10-3/812 1/4 10 R63PK12-1/4 R63PB12-1/412 3/8 10 R63PK12-3/8 R63PB12-3/812 1/2 5 R63PK12-1/2 R63PB12-1/214 3/8 5 R63PK14-3/8 R63PB14-3/814 1/2 5 R63PK14-1/2 R63PB14-1/2
Tube Thread Pack Plastic MetalØ1 B Qty Order code Order code
3 1/8 10 S63PMK3-1/84 1/8 10 S63PMK4-1/8 S63PB4-1/84 1/4 10 S63PMK4-1/4 S63PB4-1/46 1/8 10 S63PMK6-1/8 S63PB6-1/86 1/4 10 S63PMK6-1/4 S63PB6-1/48 1/8 10 S63PK8-1/8 S63PB8-1/88 1/4 10 S63PK8-1/4 S63PB8-1/48 3/8 10 S63PK8-3/8 S63PB8-3/810 1/4 10 S63PK10-1/4 S63PB10-1/410 3/8 10 S63PK10-3/8 S63PB10-3/812 1/4 10 S63PK12-1/4 S63PB12-1/412 3/8 10 S63PK12-3/8 S63PB12-3/812 1/2 5 S63PK12-1/2 S63PB12-1/214 3/8 5 S63PK14-3/8 S63PB14-3/814 1/2 5 S63PK14-1/2 S63PB14-1/2
Tube Thread Pack Plastic MetalØ1 B Qty Order code Order code
For dimensions see page
Prestolok Micro (Plastic) page 23 to 30
Prestolok 2 (Plastic) page 31 to 39
Prestolok (Metal) page 40 - 47
Pneumatic 1.14
Adjustable double male Y connector - BSPP
1
1
B
Adjustable male Y connector - BSPP
1
1
B
Adjustable male Y connector - metric straight thread
1
1
B
BSPP and Metric Y and Multiple Fittings
Adjustable male multiple tee - BSPP
Tube Tube Thread Pack PlasticØ1 Ø2 B Qty Order code
6 4 1/8 5 J664PK6-4-1/86 4 1/4 5 J664PK6-4-1/48 4 1/8 5 J664PK8-4-1/88 4 1/4 5 J664PK8-4-1/48 4 3/8 5 J664PK8-4-3/88 6 1/8 5 J664PK8-6-1/88 6 1/4 5 J664PK8-6-1/48 6 3/8 5 J664PK8-6-3/810 6 1/4 5 J664PK10-6-1/410 6 3/8 5 J664PK10-6-3/8
2
1
2 2 2
B
Tube Thread Pack PlasticØ1 B Qty Order code
4 1/8 10 YJ564PK4-1/84 1/4 10 YJ564PK4-1/4
Tube Thread Pack PlasticØ1 B Qty Order code
4 1/8 10 YJ64PK4-1/8
4 1/4 10 YJ64PK4-1/4
6 1/8 10 YJ64PK6-1/8
6 1/4 10 YJ64PK6-1/4
8 1/8 10 YJ64PK8-1/8
8 1/4 10 YJ64PK8-1/4
Tube Thread Pack PlasticØ1 B Qty Order code
3 M3x0,5 10 YJ68PMK3M3
4 M5x0,8 10 YJ68PMK4M5
6 M5x0,8 10 YJ68PMK6M5
For dimensions see page
Prestolok Micro (Plastic) page 23 to 30
Prestolok 2 (Plastic) page 31 to 39
Prestolok (Metal) page 40 - 47
Pneumatic 1.15
Adjustable double male Y connector - BSPT
1
1
A
Adjustable male Y connector - BSPT
1
1
A
BSPT Y and Multiple Fittings
Adjustable male multiple tee - BSPT
Tube Tube Thread Pack PlasticØ1 Ø2 A Qty Order code
6 4 1/8 5 J663PK6-4-1/86 4 1/4 5 J663PK6-4-1/48 4 1/8 5 J663PK8-4-1/88 4 1/4 5 J663PK8-4-1/48 4 3/8 5 J663PK8-4-3/88 6 1/8 5 J663PK8-6-1/88 6 1/4 5 J663PK8-6-1/48 6 3/8 5 J663PK8-6-3/810 6 1/4 5 J663PK10-6-1/410 6 3/8 5 J663PK10-6-3/8
2
1
2 2 2
A
Tube Thread Pack PlasticØ1 A Qty Order code
4 1/8 5 YJ563PK4-1/84 1/4 5 YJ563PK4-1/4
Tube Thread Pack PlasticØ1 A Qty Order code
3 1/8 10 YJ63PMK3-1/84 1/8 10 YJ63PMK4-1/86 1/8 10 YJ63PMK6-1/84 1/4 10 YJ63PK4-1/46 1/4 10 YJ63PK6-1/48 1/8 10 YJ63PK8-1/88 1/4 10 YJ63PK8-1/4
For dimensions see page
Prestolok Micro (Plastic) page 23 to 30
Prestolok 2 (Plastic) page 31 to 39
Prestolok (Metal) page 40 - 47
Pneumatic 1.16
Unequal union
Tube Tube Pack PlasticØ1 Ø2 Qty Order code
1 2
4 3 10 HPMK4-36 4 10 HPMK6-48 4 10 HPK8-48 6 10 HPK8-6
10 6 10 HPK10-610 8 10 HPK10-812 10 10 HPK12-10
Equal unionØ1 Pack Plastic Metal
Qty Order code Order code3 10 HPMK3 -4 10 HPMK4 HPB46 10 HPMK6 HPB68 10 HPK8 HPB8
10 10 HPK10 HPB1012 10 HPK12 HPB1214 10 HPK14 HPB14
1
Equal union elbowTube Pack Plastic MetalØ1 Qty Order code Order code
3 10 EPMK34 10 EPMK4 EPB46 10 EPMK6 EPB68 10 EPK8 EPB8
10 10 EPK10 EPB1012 10 EPK12 EPB1214 10 EPK14 EPB14
1
Tube to Tube Fittings
Equal union tee
1
Unequal union tee
11
2
Tube Pack Plastic MetalØ1 Qty Order code Order code
3 10 JPMK34 10 JPMK4 JPB46 10 JPMK6 JPB68 10 JPK8 JPB8
10 10 JPK10 JPB1012 10 JPK12 JPB1214 5 JPK14 JPB14
Tube Tube Pack PlasticØ1 Ø2 Qty Order code
6 4 10 JPK6-6-48 6 10 JPK8-8-6
10 8 10 JPK10-10-812 10 10 JPK12-12-104 6 10 JPK4-4-66 8 10 JPK6-6-88 10 10 JPK8-8-10
10 12 10 JPK10-10-12
For dimensions see page
Prestolok Micro (Plastic) page 23 to 30
Prestolok 2 (Plastic) page 31 to 39
Prestolok (Metal) page 40 - 47
Pneumatic 1.17
Tube to Tube Fittings
Union double Y connector
Tube Tube Pack PlasticØ1 Ø2 Qty Order code
4 4 10 YJ5PK46 4 10 YJ5PK6-41
2
2
Unequal union Y connectorTube Tube Pack PlasticØ1 Ø2 Qty Order code
4 3 10 YJPMK4-3
6 3 10 YJPMK6-3
6 4 10 YJPMK6-4
6 8 10 YJPK6-6-8
8 10 10 YJPK8-8-10
1
1
2
Equal union Y connector
1
1
Multiple tee - 5 connectionsTube Tube Pack PlasticØ1 Ø2 Qty Order code
6 4 5 J5PK6-4
8 4 5 J5PK8-4
8 6 5 J5PK8-6
10 6 5 J5PK10-6
22 2
11
Multiple tee - 6 connectionsTube Tube Pack PlasticØ1 Ø2 Qty Order code
6 4 5 J6PK6-4
8 4 5 J6PK8-4
8 6 5 J6PK8-6
10 6 5 J6PK10-62
11
2 2 2
Tube Pack PlasticØ1 Qty Order code
3 10 YJPMK3
4 10 YJPMK4
6 10 YJPMK6
8 10 YJPK8
10 10 YJPK10
1
For dimensions see page
Prestolok Micro (Plastic) page 23 to 30
Prestolok 2 (Plastic) page 31 to 39
Prestolok (Metal) page 40 - 47
Pneumatic 1.18
Plug in Fittings
Tube end expander
2 1
Tube end reducer
2 1
Double male union
1
Plug
1
Pressure indicator
1
4 6 10 TE2PMK4-6 TEPB4-6
Tube Tube Pack Plastic MetalØ1 Ø2 Qty Order code Order code
4 3 10 TR2PMK4-36 4 10 TR2PK6-4 TRPB6-48 4 10 TR2PK8-4 TRPB8-48 6 10 TR2PK8-6 TRPB8-610 4 10 TR2PK10-4 TRPB10-410 6 10 TR2PK10-6 TRPB10-610 8 10 TR2PK10-8 TRPB10-812 6 10 TR2PK12-6 TRPB12-612 8 10 TR2PK12-8 TRPB12-812 10 10 TR2PK12-10 TRPB12-1014 8 10 TR2PK14-8 TRPB14-814 10 10 TR2PK14-10 TRPB14-1014 12 10 TR2PK14-12 TRPB14-12
Tube Tube Pack Plastic MetalØ1 Ø2 Qty Order code Order code
3 10 FNPMK34 10 FNPK4 FNPB46 10 FNPK6 FNPB68 10 FNPK8 FNPB810 10 FNPK10 FNPB1012 10 FNPK12 FNPB1214 10 FNPK14 FNPB14
Tube Pack Plastic MetalØ1 Qty Order code Order code
4 10 BPK46 10 BPK68 10 BPK810 10 BPK1012 10 BPK1214 10 BPK14
Tube Pack PlasticØ1 Qty Order code
4 10 TS2PK46 10 TS2PK68 10 TS2PK8
Tube Pack PlasticØ1 Qty Order code
For dimensions see page
Prestolok Micro (Plastic) page 23 to 30
Prestolok 2 (Plastic) page 31 to 39
Prestolok (Metal) page 40 - 47
Pneumatic 1.19
Plug-in run tee
1
2
Plug in branch tee
1
2
Compact plug-in elbowTube Tube Pack PlasticØ1 Ø2 Qty Order code
3 3 10 T2ESPMK33 4 10 T2ESPMK3-44 4 10 T2ESPMK46 6 10 T2ESPMK64 6 10 T2ESPMK4-68 8 10 T2ESPK8
1
2
Plug in double Y connector
1
2
2
Equal plug in Y connector
Unequal plug in Y connector
1
1
2
Tube Tube Pack PlasticØ1 Ø2 Qty Order code
4 4 10 T2JJPK46 6 10 T2JJPK68 8 10 T2JJPK8
Tube Tube Pack PlasticØ1 Ø2 Qty Order code
4 4 10 T2JPK46 6 10 T2JPK68 8 10 T2JPK8
Tube Pack PlasticØ1 Qty Order code
3 10 YJ2PMK34 10 YJ2PMK46 10 YJ2PMK68 10 YJ2PK8
Tube Tube Pack PlasticØ1 Ø2 Qty Order code
4 3 10 YJ2PMK4-3
6 4 10 YJ2PMK6-4
Tube Tube Pack PlasticØ1 Ø2 Qty Order code
6 4 5 YJ52PK6-4
Plug in Fittings
For dimensions see page
Prestolok Micro (Plastic) page 23 to 30
Prestolok 2 (Plastic) page 31 to 39
Prestolok (Metal) page 40 - 47
Pneumatic 1.20
Bulkhead and Manifold Fittings
Bulkhead equal union
Tube Pack Plastic MetalØ1 Qty Order code Order code
3 10 WPMB34 10 WPMB4 WPB46 10 WPMB6 WPB68 10 WPB8
10 10 WPB1012 10 WPB1214 10 WPB14
1
Adjustable male bulkhead Y connector
1
1
1
90° adjustable bulkhead union elbow
1
M
L
L1
W
C 4
C
B
Manifold for 2 tubes and pressure indicator
Manifold for 3 tubes
1
1
1
11
Tube Pack Plastic MetalØ1 Qty Order code Order code
4 10 WE6PK4 WE6PB46 10 WE6PK6 WE6PB68 10 WE6PK8 WE6PB8
10 10 WE6PK10 WE6PB1012 10 WE6PK12 WE6PB12
Tube Pack PlasticØ1 Qty Order code
4 10 WYJ6PK46 10 WYJ6PK68 10 WYJ6PK8
Tube Pack PlasticØ1 Qty Order code
4 10 HS3PK46 10 HS3PK68 10 HS3PK8
Tube Pack PlasticØ1 Qty Order code
4 10 J3PK46 10 J3PK68 10 J3PK8
For dimensions see page
Prestolok Micro (Plastic) page 23 to 30
Prestolok 2 (Plastic) page 31 to 39
Prestolok (Metal) page 40 - 47
Pneumatic 1.21
Single banjo - assembled
Tube Thread Pack Plastic MetalØ1 B Qty Order code Order code
3 M3x0,5 10 COR8PMB3M33 M5x0,8 10 COR8PMB3M54 M5x0,8 10 COR8PB4M54 1/8 10 COR4PB4-1/86 1/8 10 COR4PB6-1/86 1/4 10 COR4PB6-1/48 1/8 10 COR4PB8-1/88 1/4 10 COR4PB8-1/410 3/8 10 COR4PB10-3/8
B
1
Double banjo - assembled
Tube Thread Pack MetalØ1 B Qty Order code
4 M5x0,8 10 COR8PB4DM5
4 1/8 10 COR4PB4D1/8
6 1/8 10 COR4PB6D1/8
6 1/4 10 COR4PB6D1/4
8 1/8 10 COR4PB8D1/8B
1
Banjo components (all Prestolok)
Tube Thread Single Body Double Body Single Bolt Stacking BoltØ1 B Order code Order code Order code Order code
4 M5x0,8 CORPB4-5 CORPB4D5 SC8UM5-4 SC8UDM5-44 1/8 CORPB4-10 CORPB4D10 SC4U1/8-4 SC4UD1/8-46 1/8 CORPB6-10 CORPB6D10 SC4U1/8-4 SC4UD1/8-46 1/4 CORPB6-13 CORPB6D13 SC4U1/4-6 SC4UD1/4-68 1/8 CORPB8-10 CORPB8D10 SC4U1/8-4 SC4UD1/8-48 1/4 CORPB8-13 SC4U1/4-6 SC4UD1/4-610 3/8 CORPB10-17 SC4U3/8-10 SC4UD3/8-10
Banjo's
B
B
For dimensions see page
Prestolok Micro (Plastic) page 23 to 30
Prestolok 2 (Plastic) page 31 to 39
Prestolok (Metal) page 40 - 47
Pneumatic 1.22
Protective Caps
Protective cap
Tube Colour Pack PlasticØ1 Qty Order code
4 White 10 C4W4 Blue 10 C4BU4 Green 10 C4G4 Red 10 C4R4 Yellow 10 C4Y4 Black 10 C4BL6 White 10 C6W6 Blue 10 C6BU6 Green 10 C6G6 Red 10 C6R6 Yellow 10 C6Y6 Black 10 C6BL8 White 10 C8W8 Blue 10 C8BU8 Green 10 C8G8 Red 10 C8R8 Yellow 10 C8Y8 Black 10 C8BL10 White 10 C10W10 Blue 10 C10BU10 Green 10 C10G10 Red 10 C10R10 Yellow 10 C10Y10 Black 10 C10BL12 White 10 C12W12 Blue 10 C12BU12 Green 10 C12G12 Red 10 C12R12 Black 10 C12BL14 White 10 C14W14 Blue 10 C14BU14 Green 10 C14G14 Red 10 C14R14 Yellow 10 C14Y14 Black 10 C14BL
1
For dimensions see page
Prestolok Micro (Plastic) page 23 to 30
Prestolok 2 (Plastic) page 31 to 39
Prestolok (Metal) page 40 - 47
Pneumatic 1.23
1
N J
BE
C
Male - metric straight thread
1 B Part number C E J N
3 M3x0.5 F8PMB3M3 7 6.5 3.25 11.45 53 M5x0.8 F8PMB3M5 7 6.5 3.50 11.20 54 M3x0.5 F8PMB4M3 8 7.9 3.25 11.95 54 M5x0.8 F8PMB4M5 8 7.9 3.50 11.80 76 M5x0.8 F8PMB6M5 11 10.5 3.50 14.80 7
Weightg.
Male connector - metric straight thread
1
N J
BE
1 B Part number E J N *Int. H
3 M3x0.5 F28PMB3M3 7.0 3.25 13.65 1.5 53 M5x0.8 F28PMB3M5 6.5 3.50 9.80 2.0 54 M3x0.5 F28PMB4M3 7.9 3.25 14.15 1.5 64 M5x0.8 F28PMB4M5 7.9 3.50 11.70 2.0 66 M5x0.8 F28PMB6M5 10.5 3.50 14.80 2.0 7
*This fitting has been designed for use where space is at a premium. It is assembled using the internal hexagon and an Allen key.
Weightg.
Male connector - BSPP
1
N J
BE
C
1 B Part number C E J N
4 G 1/8 A F4PMB4-1/8 13 7.9 5.0 7.9 84 G 1/4 A F4PMB4-1/4 16 7.9 5.5 7.9 126 G 1/8 A F4PMB6-1/8 13 10.5 5.0 12.3 106 G 1/4 A F4PMB6-1/4 16 10.5 5.5 8.8 14
Weightg.
1 BE
LJ
C
Female - metric
1 B Part number C E J L
3 M3x0.5 G8PMB3M3 7 6.5 4.25 14.05 53 M5x0.8 G8PMB3M5 7 6.5 6.60 17.90 54 M3x0.5 G8PMB4M3 8 7.9 4.25 14.55 54 M5x0.8 G8PMB4M5 8 7.9 6.60 18.40 5
Weightg.
1 BE
LJ
C
Female - BSPP
1 B Part number C E J L
4 Rp 1/8 G4PMB4-1/8 13 7.9 8 19.9 94 Rp 1/4 G4PMB4-1/4 16 7.9 10 21.9 156 Rp 1/8 G4PMB6-1/8 13 10.5 8 22.8 106 Rp 1/4 G4PMB6-1/4 16 10.5 10 24.8 15
Weightg.
Prestolok Micro - Dimensions
Pneumatic 1.24
Male connector - BSPT
1
R internalhex
P
AE
PTC
Threads are treated with Parker Teflon®
Coating (PTC) sealing material.
1 A Part number E P R Int. H
3 R 1/8 F23PMB3-1/8 6.5 6.5 10.2 2.0 44 R 1/8 F23PMB4-1/8 7.9 6.5 11.4 2.5 56 R 1/8 F23PMB6-1/8 10.5 6.5 14.1 3.0 7
This fitting has been designed for use where space is at a premium.It is assembled using the internal hexagon and an Allen key.
Weightg.
Male connector - BSPT
E
R
P
A
C
PTC
Threads are treated with Parker Teflon®
Coating (PTC) sealing material.
1 A Part number C P R
4 R 1/8 F3PMB4-1/8 10 6.5 11.4 74 R 1/4 F3PMB4-1/4 14 10.0 13.4 116 R 1/8 F3PMB6-1/8 11 6.5 14.8 106 R 1/4 F3PMB6-1/4 14 10.0 13.8 16
Weightg.
Adjustable extended male elbow - metric straight thread
1
N
E
M
C
J
B
1 B Part number C E J M N
3 M3x0.5 C68LPMK3M3 6 7.3 3.25 11.25 17.0 73 M5x0.8 C68LPMK3M5 8 7.3 3.50 11.25 17.0 84 M3x0.5 C68LPMK4M3 8 8.5 3.25 12.65 18.8 84 M5x0.8 C68LPMK4M5 8 8.5 3.50 12.65 18.8 86 M5x0.8 C68LPMK6M5 10 11.5 3.50 16.70 23.7 9
Weightg.
Prestolok Micro - Dimensions
Adjustable male elbow - metric straight thread
1 B Part number C E J M N
3 M3x0.5 C68PMK3M3 7 7.3 3.25 11.25 9.2 63 M5x0.8 C68PMK3M5 7 7.3 3.50 11.25 9.2 64 M3x0.5 C68PMK4M3 8 8.5 3.25 12.65 9.8 64 M5x0.8 C68PMK4M5 8 8.5 3.50 12.65 9.8 66 M5x0.8 C68PMK6M5 11 11.5 3.50 16.70 11.7 7
Weightg.
1
N
E
M
CJ
B
Pneumatic 1.25
Adjustable extended male elbow - BSPP
1 B Part number C E J M N
4 G 1/8 A C64LPMK4-1/8 13 8.5 5.0 12.65 17.2 104 G 1/4 A C64LPMK4-1/4 16 8.5 5.5 12.65 17.2 136 G 1/8 A C64LPMK6-1/8 13 11.5 5.0 16.70 23.7 126 G 1/4 A C64LPMK6-1/4 16 11.5 5.5 16.70 21.7 12
Weightg.
1
N
E
M
C
J
B
Adjustable male elbow - BSPT
1 A Part number C E M P R
3 R 1/8 C63PMK3-1/8 10 7.3 11.25 6.5 11.6 64 R 1/8 C63PMK4-1/8 10 8.5 12.65 6.5 12.2 64 R 1/4 C63PMK4-1/4 14 8.5 12.65 10.0 14.2 66 R 1/8 C63PMK6-1/8 11 11.5 16.70 6.5 13.7 76 R 1/4 C63PMK6-1/4 14 11.5 16.70 10.0 15.7 7
Weightg.
1
R
E
M
C
P
A PTC
Threads are treated with Parker Teflon®
Coating (PTC) sealing material.
Adjustable male run tee - metric straight thread
1 B
M
M N J
E
C
1 B Part number C E J M N
3 M3x0.5 R68PMK3M3 7 7.3 3.25 11.25 9.2 63 M5x0.8 R68PMK3M5 7 7.3 3.50 11.25 9.2 64 M3x0.5 R68PMK4M3 8 8.5 3.25 12.65 9.8 74 M5x0.8 R68PMK4M5 8 8.5 3.50 12.65 9.8 76 M5x0.8 R68PMK6M5 11 11.5 3.50 16.70 11.7 8
Weightg.
Adjustable male run tee - BSPP
1 B
M
M N J
E
C
1 B Part number C E J M N
4 G 1/8 R64PMK4-1/8 13 8.5 5.0 12.65 8.2 74 G 1/4 R64PMK4-1/4 16 8.5 5.5 12.65 8.2 76 G 1/8 R64PMK6-1/8 13 11.5 5.0 16.70 11.7 86 G 1/4 R64PMK6-1/4 16 11.5 5.5 16.70 9.7 9
Weightg.
Prestolok Micro - Dimensions
Pneumatic 1.26
Adjustable male branch tee - metric straight thread
1
N
J
E
M M
B
C
1 B Part number C E J M N
3 M3x0.5 S68PMK3M3 7 7.3 3.25 11.25 9.2 63 M5x0.8 S68PMK3M5 7 7.3 3.50 11.25 9.2 64 M3x0.5 S68PMK4M3 8 8.5 3.25 12.65 9.8 74 M5x0.8 S68PMK4M5 8 8.5 3.50 12.65 9.8 76 M5x0.8 S68PMK6M5 11 11.5 3.50 16.70 11.7 8
Weightg.
Adjustable male branch tee - BSPP
1
N
J
E
M M
B
C
1 B Part number C E J M N
4 G 1/8 A S64PMK4-1/8 13 8.5 5.0 12.65 8.2 74 G 1/4 A S64PMK4-1/4 16 8.5 5.5 12.65 8.2 76 G 1/8 A S64PMK6-1/8 13 11.5 5.0 16.70 11.7 86 G 1/4 A S64PMK6-1/4 16 11.5 5.5 16.70 9.7 9
Weightg.
Adjustable male run tee - BSPT
1
M
M R
E
P
A
C
PTC
Threads are treated with Parker Teflon®
Coating (PTC) sealing material.
1 A Part number C E M P R
3 R 1/8 R63PMK3-1/8 10 7.3 11.25 6.5 11.6 74 R 1/8 R63PMK4-1/8 10 8.5 12.65 6.5 12.2 74 R 1/4 R63PMK4-1/4 14 8.5 12.65 10.0 14.2 76 R 1/8 R63PMK6-1/8 11 11.5 16.70 6.5 13.7 86 R 1/4 R63PMK6-1/4 14 11.5 16.70 10.0 15.7 8
Weightg.
Adjustable male branch tee - BSPT
1
R
E
M M
CP
A PTC
Threads are treated with Parker Teflon®
Coating (PTC) sealing material.
1 A Part number C E M P R
3 R 1/8 S63PMK3-1/8 10 7.3 11.25 6.5 11.6 74 R 1/8 S63PMK4-1/8 10 8.5 12.65 6.5 12.2 74 R 1/4 S63PMK4-1/4 14 8.5 12.65 10.0 14.2 76 R 1/8 S63PMK6-1/8 11 11.5 16.70 6.5 13.7 86 R 1/4 S63PMK6-1/4 14 11.5 16.70 10.0 15.7 8
Weightg.
Prestolok Micro - Dimensions
Pneumatic 1.27
Adjustable male Y connector - BSPT
1
1
L2L1
R
P
A
C
PTC
Threads are treated with Parker Teflon®
Coating (PTC)(PTC)(PTC)(PTC)(PTC) sealing material.
1 A Part number C L1 L2 P R
3 R 1/8 YJ63PMK3-1/8 10 14.0 6.7 6.5 27.2 74 R 1/8 YJ63PMK4-1/8 10 16.6 8.1 6.5 29.4 76 R 1/8 YJ63PMK6-1/8 11 22.3 10.8 6.5 36.4 9
Weightg.
1E
L
2
1E
L
2
Equal union
Unequal union
1 2 Part number E L
3 3 HPMK3 7.3 19.8 24 4 HPMK4 8.5 21.8 36 6 HPMK6 11.5 27.8 3
Weightg.
1 2 Part number E L
4 3 HPMK4-3 8.5 21.2 26 4 HPMK6-4 11.5 27.8 3
Weightg.
Equal elbow
1
M
M
E
1 Part number E M
3 EPMK3 7.3 11.25 24 EPMK4 8.5 12.65 36 EPMK6 11.5 16.70 3
Weightg.
Prestolok Micro - Dimensions
Adjustable male Y connector - metric straight thread
1
1
L2L1
N J
B
C
1 B Part number C J L1 L2 N
3 M3x0.5 YJ68PMK3M3 8 3.25 14.0 6.7 24.2 74 M5x0.8 YJ68PMK4M5 9 3.50 16.6 8.1 26.2 76 M5x0.8 YJ68PMK6M5 12 3.50 22.3 10.8 34.1 8
Weightg.
Pneumatic 1.28
Equal Y union
1
1
L2L1
L
2
Unequal Y union
1
1
L2L1
L
2
1 2 Part number L L1 L2
3 3 YJPMK3 22.0 13.9 6.7 34 4 YJPMK4 24.8 16.4 8.1 46 6 YJPMK6 31.8 22.2 10.8 5
Weightg.
1 2 Part number L L1 L2
4 3 YJPMK4-3 24.2 16.4 8.1 36 3 YJPMK6-3 31.2 22.2 10.8 46 4 YJPMK6-4 31.8 22.2 10.8 4
Weightg.
Tube end expander
12
L
1 2 Part number L
6 4 TE2PMK4-6 31.7 2
Weightg.
Tube end reducer
2 1
L1 2 Part number L
3 4 TR2PMK4-3 26.4 2
Weightg.
Prestolok Micro - Dimensions
Equal tee
1
M
M M
L
E
1 Part number E L M
3 JPMK3 7.3 22.5 11.25 34 JPMK4 8.5 25.3 12.65 36 JPMK6 11.5 33.4 16.70 4
Weightg.
Pneumatic 1.29
Plug
1
L
1 Part number L
3 FNPMK3 22 1
Weightg.
Compact plug-in elbow
1
H
E
M
2
1 2 Part number E H M
3 3 T2ESPMK3 7.3 16 11.25 23 4 T2ESPMK3-4 7.3 16 11.25 24 4 T2ESPMK4 8.5 16 12.65 24 6 T2ESPMK4-6 8.5 17 12.65 26 6 T2ESPMK6 11.5 17 16.70 3
Weightg.
Equal plug-in Y union
1
1
L2 2L1
H
L
1 2 Part number H L L1 L2
3 3 YJ2PMK3 16 35.7 13.9 6.7 34 4 YJ2PMK4 16 37.9 16.4 8.1 36 6 YJ2PMK6 17 45.9 22.2 10.8 3
Weightg.
Prestolok Micro - Dimensions
Unequal plug-in Y union
1
1
L2 2L1
H
L
1 2 Part number H L L1 L2
4 3 YJ2PMK4-3 16 37.9 16.4 8.1 36 4 YJ2PMK6-4 16 44.9 22.2 10.8 4
Weightg.
Pneumatic 1.30
Bulkhead equal union
1 1
L
W
BC C
1 B Part number C L
3 M8x1 WPMB3 12 20.15 5 104 M10x1 WPMB4 14 21.15 5 116 M12x1 WPMB6 16 26.00 8 13
Weightg.
Wmaxi.
Banjo - metric straight thread
1 B Part number C4 E J K M N T
3 M3x0.5 COR8PMB3M3 6 6.5 3.25 0.5 12.5 10 4 53 M5x0.8 COR8PMB3M5 8 6.5 4.50 0.5 13.5 10 4 5
Weightg.
1T
N
KE
MC4
J
B
Prestolok Micro - Dimensions
Pneumatic 1.31
Prestolok 2 - Dimensions
Adjustable male elbow - BSPP
1
M
O
J
N
C4
B
ø 3xQ
1 3 B Part number C4 J M N O Width Weightdia. Q g.
8 4.2 1/8 C64PK8-1/8 14 6 22.5 29.0 17 19.0 228 4.2 1/4 C64PK8-1/4 19 9 22.5 34.0 17 19.0 358 4.2 3/8 C64PK8-3/8 22 9 22.5 35.0 17 19.0 4910 4.2 1/4 C64PK10-1/4 19 9 28.5 39.0 21 23.5 4510 4.2 3/8 C64PK10-3/8 22 9 28.5 40.0 21 23.5 6012 4.2 1/4 C64PK12-1/4 19 9 30.0 40.5 23 25.5 5612 4.2 3/8 C64PK12-3/8 22 9 30.0 41.5 23 25.5 6014 4.2 3/8 C64PK14-3/8 22 9 33.5 45.0 25 27.5 7414 4.2 1/2 C64PK14-1/2 27 12 33.5 49.5 25 27.5 103
O
M
1H
JC 4
B
Our fittings are supplied without cap. Cap must be ordered separately
Compact adjustable male elbow - metric straight thread
1 B Part number C4 H J M O Weightg.
4 C68SPK4M5 10 15.5 5 20.5 13 6
Adjustable male elbow - BSPT
Threads are treated with Parker Teflon®
Coating (PTC) sealing material
1
M
O
N
PC4
PTC
A
ø 3xQ
1 3 A Part number C4 M N O P Width Weightdia. Q g.
8 4.2 1/8 C63PK8-1/8 14 22.5 29.5 17 7.5 19.0 208 4.2 1/4 C63PK8-1/4 14 22.5 32.5 17 11.0 19.0 278 4.2 3/8 C63PK8-3/8 17 22.5 34.0 17 11.5 19.0 3810 4.2 1/4 C63PK10-1/4 17 28.5 40.0 21 11.0 23.5 3710 4.2 3/8 C63PK10-3/8 17 28.5 39.0 21 11.5 23.5 4310 4.2 1/2 C63PK10-1/2 22 28.5 42.0 21 15.0 23.5 6312 4.2 1/4 C63PK12-1/4 19 30.0 41.5 23 11.0 25.5 5512 4.2 3/8 C63PK12-3/8 19 30.0 41.0 23 11.5 25.5 5912 4.2 1/2 C63PK12-1/2 22 30.0 44.5 23 15.0 25.5 6814 4.2 3/8 C63PK14-3/8 22 33.5 45.5 25 11.5 27.5 6814 4.2 1/2 C63PK14-1/2 22 33.5 48.0 25 15.0 27.5 78
Adjustable extended male elbow - BSPT
M5x0.8
1
M
O
N
P
C4
PTC
A
ø 3xQ
Threads are treated with Parker Teflon®
Coating (PTC) sealing material
1 3 A Part number C4 M N O P Width Weightdia. Q g.
4 3.2 1/8 C63LPK4-1/8 10 18.0 41.0 13 7.5 15 224 3.2 1/4 C63LPK4-1/4 14 18.0 45.0 13 11.0 15 466 4.2 1/8 C63LPK6-1/8 11 20.5 45.0 15 7.5 17 286 4.2 1/4 C63LPK6-1/4 14 20.5 49.0 15 11.0 17 488 4.2 1/8 C63LPK8-1/8 14 22.5 49.5 17 7.5 19 468 4.2 1/4 C63LPK8-1/4 14 22.5 52.0 17 11.0 19 51
Pneumatic 1.32
Adjustable male run tee - BSPT
M
M
O
1
N
C4
PTCP
A
ø 3xQ
Threads are treated with Parker Teflon®
Coating (PTC) sealing material
1 3 A Part number C4 M N O P Width Weightdia. Q g.
8 4.2 1/8 R63PK8-1/8 14 22.5 29.5 17 7.5 19.0 248 4.2 1/4 R63PK8-1/4 14 22.5 32.5 17 11.0 19.0 318 4.2 3/8 R63PK8-3/8 17 22.5 34.0 17 11.5 19.0 42
10 4.2 1/4 R63PK10-1/4 17 28.5 40.0 21 11.0 23.5 4410 4.2 3/8 R63PK10-3/8 17 28.5 39.0 21 11.5 23.5 5112 4.2 1/4 R63PK12-1/4 19 30.0 41.5 23 11.0 25.5 6512 4.2 3/8 R63PK12-3/8 19 30.0 41.0 23 11.5 25.5 6912 4.2 1/2 R63PK12-1/2 22 30.0 44.5 23 15.0 25.5 7814 4.2 3/8 R63PK14-3/8 22 33.5 45.5 25 11.5 27.5 8214 4.2 1/2 R63PK14-1/2 22 33.5 48.0 25 15.0 27.5 92
Prestolok 2 - Dimensions
Adjustable male run tee - BSPP
M
M
O
1
N
J
C4
B
ø 3xQ
1 3 B Part number C4 J M N O Width Weight
dia. Q g.
8 4.2 1/8 R64PK8-1/8 14 6 22.5 29.0 17 19.0 268 4.2 1/4 R64PK8-1/4 19 9 22.5 34.0 17 19.0 388 4.2 3/8 R64PK8-3/8 22 9 22.5 35.0 17 19.0 53
10 4.2 1/4 R64PK10-1/4 19 9 28.5 39.0 21 23.5 5210 4.2 3/8 R64PK10-3/8 22 9 28.5 40.0 21 23.5 6812 4.2 1/4 R64PK12-1/4 19 9 30.0 40.5 23 25.5 6612 4.2 3/8 R64PK12-3/8 22 9 30.0 41.5 23 25.5 7014 4.2 3/8 R64PK14-3/8 22 9 33.5 45.0 25 27.5 8814 4.2 1/2 R64PK14-1/2 27 12 33.5 49.5 25 27.5 117
Adjustable male branch tee - BSPP
M
O1
M
N
J C4
B
ø 3xQ
1 3 B Part number C4 J M N O Width Weightdia. Q g.
8 4.2 1/8 S64PK8-1/8 14 6 22.5 29.0 17 19.0 268 4.2 1/4 S64PK8-1/4 19 9 22.5 34.0 17 19.0 388 4.2 3/8 S64PK8-3/8 22 9 22.5 35.0 17 19.0 5310 4.2 1/4 S64PK10-1/4 19 9 28.5 39.0 21 23.5 5210 4.2 3/8 S64PK10-3/8 22 9 28.5 40.0 21 23.5 6812 4.2 1/4 S64PK12-1/4 19 9 30.0 40.5 23 25.5 6612 4.2 3/8 S64PK12-3/8 22 9 30.0 41.5 23 25.5 7014 4.2 3/8 S64PK14-3/8 22 9 33.5 45.0 25 27.5 8814 4.2 1/2 S64PK14-1/2 27 12 33.5 49.5 25 27.5 117
Compact adjustable male elbow - BSPT
O
M
1 H
PC4
PTC
A
Threads are treated with Parker Teflon®
Coating (PTC) sealing material
1 A Part number C4 H M O P Weightg.
4 1/8 C63SPK4-1/8 10 14.5 20.5 13 6.5 94 1/4 C63SPK4-1/4 14 14.5 20.5 13 10.0 186 1/8 C63SPK6-1/8 11 16.5 23.0 15 6.5 146 1/4 C63SPK6-1/4 14 16.0 23.0 15 10.0 218 1/8 C63SPK8-1/8 14 19.5 25.0 17 6.5 158 1/4 C63SPK8-1/4 14 18.5 25.0 17 10.0 258 3/8 C63SPK8-3/8 17 18.5 25.0 17 10.0 2810 1/4 C63SPK10-1/4 17 23.0 31.0 21 10.0 3010 3/8 C63SPK10-3/8 17 22.5 31.0 21 10.0 3610 1/2 C63SPK10-1/2 22 24.0 31.0 21 12.5 45
Pneumatic 1.33
Prestolok 2 - Dimensions
Adjustable male branch tee - BSPT
M
O 1
M
N
C4 PPTC
A
ø 3xQ
Threads are treated with Parker Teflon®
Coating (PTC) sealing material
1 3 A Part number C4 M N O P Width Weight
dia. Q g.
8 4.2 1/8 S63PK8-1/8 14 22.5 29.5 17 7.5 19.0 248 4.2 1/4 S63PK8-1/4 14 22.5 32.5 17 11.0 19.0 318 4.2 3/8 S63PK8-3/8 17 22.5 34.0 17 11.5 19.0 4210 4.2 1/4 S63PK10-1/4 17 28.5 40.0 21 11.0 23.5 4410 4.2 3/8 S63PK10-3/8 17 28.5 39.0 21 11.5 23.5 5112 4.2 1/4 S63PK12-1/4 19 30.0 41.5 23 11.0 25.5 6512 4.2 3/8 S63PK12-3/8 19 30.0 41.0 23 11.5 25.5 6912 4.2 1/2 S63PK12-1/2 22 30.0 44.5 23 15.0 25.5 7814 4.2 3/8 S63PK14-3/8 22 33.5 45.5 25 11.5 27.5 8214 4.2 1/2 S63PK14-1/2 22 33.5 48.0 25 15.0 27.5 92
Adjustable male Y connector - BSPP
L1
1
L
L2
1C4
J
B
Ø3xQ
U
1 B 3 Part number C4 J L L1 L2 Width U Weight
dia Q g.
4 1/8 3.2 YJ64PK4-1/8 14 6 38.5 22 11.0 15 14.4 224 1/4 3.2 YJ64PK4-1/4 19 9 43.5 22 11.0 15 14.4 376 1/8 4.2 YJ64PK6-1/8 14 6 46.5 30 13.5 17 17.0 266 1/4 4.2 YJ64PK6-1/4 19 9 51.5 30 13.5 17 17.0 378 1/8 4.2 YJ64PK8-1/8 14 6 46.5 30 13.5 19 18.4 368 1/4 4.2 YJ64PK8-1/4 19 9 51.5 30 13.5 19 18.4 48
Union double Y connector adjustable male - BSPP
1 B 3 Part number C4 J L L1 L2 Width U Weightdia. Q g.
4 1/8 3.2 YJ564PK4-1/8 14 6 42.5 22.5 9.5 24.5 14.4 274 1/4 3.2 YJ564PK4-1/4 19 9 47.5 22.5 9.5 24.5 14.4 43
U
L
Ø3xQ
L2 L1
1
1
C4
J
B
Adjustable male multiple tee - BSPP
N N N
L1
2
1
2 2 2
J
L
HC4
B
ø 3xQ
1 2 3 B Part number C4 H J L L1 N Width Weightdia. Q g.
6 4 4.4 1/8 J664PK6-4-1/8 10 27 7.5 103.0 70 18 15 356 4 4.4 1/4 J664PK6-4-1/4 14 27 11.0 108.0 70 18 15 468 4 4.4 1/8 J664PK8-4-1/8 14 28 11.0 108.0 70 18 17 538 4 4.4 3/8 J664PK8-4-1/4 17 28 11.5 109.0 70 18 17 688 4 4.4 3/8 J664PK8-4-3/8 17 28 11.5 109.0 70 18 17 688 6 4.4 1/8 J664PK8-6-1/8 10 30 7.5 103.0 70 18 17 428 6 4.4 1/4 J664PK8-6-1/4 14 30 11.0 108.0 70 18 17 548 6 4.4 3/8 J664PK8-6-3/8 17 30 11.5 109.0 70 18 17 6710 6 4.4 1/4 J664PK10-6-1/4 14 33 11.0 117.9 70 18 21 6910 6 4.4 3/8 J664PK10-6-3/8 17 33 11.5 118.9 70 18 21 84
Pneumatic 1.34
Prestolok 2 - Dimensions
Adjustable male multiple tee - BSPT
N N N
L1
2
1
2 2 2
P
L
H
Ø3xQ
A
PTC
C4
Threads are treated with Parker Teflon®
Coating (PTC) sealing material
1 2 3 A Part number C4 H L L1 N P Width Weight
dia. Q g.
6 4 4.4 1/8 J663PK6-4-1/8 10 27 103.0 70 18 7.5 15 316 4 4.4 1/4 J663PK6-4-1/4 14 27 106.5 70 18 11.0 15 408 4 4.4 1/8 J663PK8-4-1/8 10 28 103.0 70 18 7.5 17 398 4 4.4 1/4 J663PK8-4-1/4 14 28 106.5 70 18 11.0 17 458 4 4.4 3/8 J663PK8-4-3/8 17 28 108.0 70 18 11.5 17 57
8 6 4.4 1/8 J663PK8-6-1/8 10 30 103.0 70 18 7.5 17 408 6 4.4 1/4 J663PK8-6-1/4 14 30 106.5 70 18 11.0 17 468 6 4.4 3/8 J663PK8-6-3/8 17 30 108.0 70 18 11.5 17 5810 6 4.4 1/4 J663PK10-6-1/4 14 33 116.4 70 18 11.0 21 6010 6 4.4 3/8 J663PK10-6-3/8 17 33 117.9 70 18 11.5 21 67
Equal union
O
L
1
1 Part number L O Weight g.
8 HPK8 39.0 17 1010 HPK10 48.0 21 1512 HPK12 49.0 23 2114 HPK14 54.0 25 30
Union double Y connector adjustable male - BSPT
Threads are treated with Parker Teflon®
Coating (PTC) sealing material
U
L
L2 L1
1
1
P
A
PTCØ3xQC4
1 3 A Part number C4 L L1 L2 P Width U Weightdia. Q g.
4 3.2 1/8 YJ563PK4-1/8 10 42.5 22.5 9.5 7.5 24.5 14.4 244 3.2 1/4 YJ563PK4-1/4 14 46.0 22.5 9.5 11.0 24.5 14.4 33
Threads are treated with Parker Teflon®
Coating (PTC) sealing material
L1
1
L
L2
1
P
U
PTCØ3xQC4
A
1 A 3 Part number C4 L L1 L2 P Width U Weightdia. Q g.
4 1/4 3.2 YJ63PK4-1/4 14 42.0 22 11.0 11.0 15 14.4 266 1/4 4.2 YJ63PK6-1/4 14 50.0 30 13.5 11.0 17 17.0 318 1/8 4.2 YJ63PK8-1/8 14 47.0 30 13.5 7.5 19 18.4 348 1/4 4.2 YJ63PK8-1/4 14 50.0 30 13.5 11.0 19 18.4 41
Adjustable male Y connector - BSPT
Pneumatic 1.35
Prestolok 2 - Dimensions
Equal union elbow
O
M
M
1
ø 3xQ
1 3 Part number M O Width Weight
dia. Q g.
8 4.2 EPK8 22.5 17 19.0 1010 4.2 EPK10 28.5 21 23.5 1712 4.2 EPK12 30.0 23 25.5 2314 4.2 EPK14 33.5 25 27.5 31
Unequal union tee
M
O 11
L
2
ø 3xQ
1 2 3 Part number L M O Width Weightdia. Q g.
6 4 4.2 JPK6-6-4 41 21.5 15 17.0 128 6 4.2 JPK8-8-6 45 22.5 17 19.0 1810 8 4.2 JPK10-10-857 28.5 21 23.5 2912 10 4.2 JPK12-12-10 60 30.0 23 25.5 384 6 4.2 JPK4-4-6 43 20.5 15 17.0 176 8 4.2 JPK6-6-8 45 22.5 17 19.0 188 10 4.2 JPK8-8-10 57 28.5 21 23.5 3410 12 4.2 JPK10-10-12 61 30.5 23 25.5 43
Equal union tee
M
M
O 1
M
L
ø 3xQ
1 3 Part number L M O Width Weightdia. Q g.
8 4.2 JPK8 45 22.5 17 19.0 1410 4.2 JPK10 57 28.5 21 23.5 2412 4.2 JPK12 60 30.0 23 25.5 3314 4.2 JPK14 67 33.5 25 27.5 45
Unequal union
O2
L
1
1 2 Part number L O Weightg.
8 4 HPK8-4 38.0 17 148 6 HPK8-6 39.0 17 1210 6 HPK10-6 47.0 21 2110 8 HPK10-8 47.0 21 1912 10 HPK12-10 49.5 23 26
Pneumatic 1.36
Prestolok 2 - Dimensions
Union double Y connector
1U
L
Ø3xQ
2
L2 L1
2
1 2 3 Part number L L1 L2 Width U Weightdia. Q g.
4 4 3.2 YJ5PK4 35 22.5 9.5 24.5 14.4 206 4 4.2 YJ5PK6-4 38 22.5 9.5 24.5 17.0 22
Multiple tee
Multiple tee
N
L1
22 2
11
N
L
H
ø 3xQ
N N N
L1
2
11
2 2 2
L
H
ø 3xQ
1 2 3 Part number H L L1 N Width Weight
dia. Q g.
6 4 4.4 J5PK6-4 27 78 52 18 15 168 4 4.4 J5PK8-4 28 80 52 18 17 218 6 4.4 J5PK8-6 30 80 52 18 17 19
10 6 4.4 J5PK10-6 33 90 52 18 21 24
1 2 3 Part number H L L1 N Width Weight
dia. Q g.
6 4 4.4 J6PK6-4 27 96 70 18 15 208 4 4.4 J6PK8-4 28 98 70 18 17 258 6 4.4 J6PK8-6 30 98 70 18 17 2410 6 4.4 J6PK10-6 33 108 70 18 21 28
Unequal union Y connector
L1
1
L
L2
1
Ø3xQ
2U
1 2 3 Part number L L1 L2 Width U Weightdia. Q g.
6 8 4.2 YJPK6-6-8 40 30 13.5 19 17.0 328 10 4.2 YJPK8-8-10 40 31 13.6 19 18.4 43
Union Y connector
L1
1
L
1 L2
1
Ø3xQ
U
1 3 Part number L L1 L2 Width U Weightdia. Q g.
8 4.2 YJPK8 40 30 13.5 19 18.4 2410 4.2 YJPK10 52 39 18.0 24 19.3 35
Pneumatic 1.37
Prestolok 2 - Dimensions
Tube end reducer
2
L
1
1 2 Part number L Weight g.
4 6 TR2PK6-4 38 44 8 TR2PK8-4 36 66 8 TR2PK8-6 39 44 10 TR2PK10-4 41 166 10 TR2PK10-6 43 38 10 TR2PK10-8 47 46 12 TR2PK12-6 36 38 12 TR2PK12-8 38 710 12 TR2PK12-10 48 48 14 TR2PK14-8 39 810 14 TR2PK14-10 42 512 14 TR2PK14-12 51 14
Plug
1
G1 Part number G Weight
g.
4 FNPK4 34.5 16 FNPK6 35.0 18 FNPK8 35.0 210 FNPK10 42.0 912 FNPK12 41.0 1014 FNPK14 40.0 10
Double male union
1
L
1 Part number L Weightg.
4 BPK4 38 16 BPK6 41 18 BPK8 41 110 BPK10 51 212 BPK12 54 214 BPK14 55 2
Pressure indicator
1
L 1 Part number L Weightg.
4 TS2PK4 36 56 TS2PK6 37 68 TS2PK8 36 8
Compact plug-in elbow
O
M
H2
H
1
2H1
1 2 Part number H H1 H2 M O Weightg.
8 8 T2ESPK8 38 11.0 22 25.0 17 8
Pneumatic 1.38
Prestolok 2 - Dimensions
Plug-in run tee
Plug-in branch tee
M
O 1
M
H
N
2
ø 3xQ
1 2 3 Part number H M N O Width Weight
dia. Q g.
4 4 3.2 T2JPK4 19.5 18.0 33.5 13 15 76 6 4.2 T2JPK6 21.0 20.5 36.5 15 17 98 8 4.2 T2JPK8 22.0 22.5 39.5 17 19 13
M
M
O
N
H
1
2
ø 3xQ
1 2 3 Part number H M N O Width Weight
dia. Q g.
4 4 3.2 T2JJPK4 19.5 18.0 33.5 13 15 76 6 4.2 T2JJPK6 21.0 20.5 36.5 15 17 98 8 4.2 T2JJPK8 22.0 22.5 39.5 17 19 13
Plug-in double Y connector
1U
L
M
L2 L1
Ø3xQ
2
2
1 2 3 Part number L L1 L2 M Width U Weightdia. Q g.
6 4 3.2 YJ52PK6-4 52 22.5 9.5 31 24.5 14.4 23
Plug-in Y connector
L1
1
L
L3
1 L2
1
Ø3xQ
U
1 3 Part number L L1 L2 L3 Width U Weightdia. Q g.
8 4.2 YJ2PK8 57.0 30 13.5 35 19 18.4 24
Pneumatic 1.39
90° adjustable bulkhead union elbow
1
M
L1
B
O
L
C4
CW
ø 3xQ
1 3 B Part number C C4 L L1 M O Width W Weightdia. Q Max. g.
4 3.2 M11x0.75 WE6PB4 14 16 37 18.0 18.0 11.5 15.0 6 226 4.2 M13x1 WE6PB6 17 17 39 19.5 20.5 13.5 17.0 6 388 4.2 M15x1.25 WE6PB8 19 19 43 21.5 22.5 15.5 19.0 6 5210 4.2 M18x1 WE6PB10 22 22 54 29.0 28.5 18.5 23.5 8 10712 4.2 M23x1.5 WE6PB12 27 27 59 30.0 30.0 23.5 25.5 10 1394 3.2 M11x0.75 WE6PK4 14 16 37 18.0 18.0 11.5 15.0 6 226 4.2 M13x1 WE6PK6 17 17 39 19.5 20.5 13.5 17.0 6 388 4.2 M15x1.25 WE6PK8 19 19 43 21.5 22.5 15.5 19.0 6 5210 4.2 M18x1 WE6PK10 22 22 54 29.0 28.5 18.5 23.5 8 10712 4.2 M23x1.5 WE6PK12 27 27 59 30.0 30.0 23.5 25.5 10 139
Adjustable male bulkhead Y connector
L11U
L
M
L2
1
1
B
C4 C
W
Ø3xQ
1 B 3 Part number C C4 L L1 L2 M Width U W Weightdia. Q Maxi g .
4 M11x0.75 3.2 WYJ6PK4 14 16 46 22 11.0 27 15 14.4 6 386 M13x1 4.2 WYJ6PK6 17 17 54 30 13.5 35 17 17.0 6 218 M15x1.25 4.2 WYJ6PK8 19 19 64 30 13.5 35 19 18.4 6 50
Manifold for 2 tubes and pressure indicator
Manifold for 3 tubes
M
11
11
X L1
M
1
1
1
11
X L1
1 Part number L1 M X Weightg.
4 HS3PK4 14 16 12 126 HS3PK6 15 18 14 158 HS3PK8 15 29 14 31
1 Part number L1 M X Weightg.
4 J3PK4 14 16 12 106 J3PK6 15 18 14 128 J3PK8 15 29 16 35
Prestolok 2 - Dimensions
Pneumatic 1.40
Male connector - BSPT
L
C4
1 A
P
PTC
Threads are treated with Parker Teflon®
Coating (PTC) sealing material
1 A Part number C4 L P H. WeightInt. g.
4 1/8 F3PB4-1/8 12 20.5 17.5 3 144 1/4 F3PB4-1/4 14 23.0 11.0 3 215 1/8 F3PB5-1/8 11 22.5 17.5 4 135 1/4 F3PB5-1/4 14 24.0 11.0 4 176 1/8 F3PB6-1/8 14 24.0 17.5 4 196 1/4 F3PB6-1/4 14 24.0 11.0 4 228 1/8 F3PB8-1/8 17 28.0 17.5 4 318 1/4 F3PB8-1/4 17 28.5 11.0 4 318 3/8 F3PB8-3/8 17 26.5 11.5 6 2810 1/4 F3PB10-1/4 19 35.5 11.0 6 4510 3/8 F3PB10-3/8 19 33.0 11.5 8 4810 1/2 F3PB10-1/2 22 31.0 15.0 8 4712 1/4 F3PB12-1/4 22 36.5 11.0 6 6812 3/8 F3PB12-3/8 22 36.0 11.5 10 4812 1/2 F3PB12-1/2 22 36.0 15.0 10 5614 3/8 F3PB14-3/8 24 39.0 11.5 10 9114 1/2 F3PB14-1/2 24 37.0 15.0 11 83
Male connector - BSPP
C 4J
1 B
L
1 B Part number C4 J L H WeightInt. g.
8 1/8 F4PB8-1/8 19 9 25.0 4 418 1/4 F4PB8-1/4 19 9 27.5 4 298 3/8 F4PB8-3/8 22 9 27.5 4 5910 1/4 F4PB10-1/4 19 9 35.5 6 5010 3/8 F4PB10-3/8 22 9 30.5 8 3910 3/8 F4PB10-1/2 27 12 29.0 8 6012 1/4 F4PB12-1/4 22 9 35.0 6 4912 3/8 F4PB12-3/8 22 9 35.0 10 4912 3/8 F4PB12-1/2 27 12 33.0 10 7214 3/8 F4PB14-3/8 24 9 38.5 10 6614 1/2 F4PB14-1/2 27 12 37.0 11 81
Female connector - BSPP
L
C 4
1 B
J
1 B Part number C4 J L Weightg.
4 1/8 G4PB4-1/8 14 19.5 26.0 226 1/8 G4PB6-1/8 14 19.5 27.5 216 1/4 G4PB6-1/4 17 14.0 33.0 228 1/8 G4PB8-1/8 17 19.5 29.0 448 1/4 G4PB8-1/4 17 14.0 33.0 29
Male connector - BSPT
L
0 A
P
1
PTC
Threads are treated with Parker Teflon®
Coating (PTC) sealing material This fitting has been designed for use where space is at a premium. It is assembled using the internal hexagonand an Allen key.
1 A Part number L O P H. WeightInt. g.
4 1/8 F23PB4-1/8 21 10 6.5 3 76 1/8 F23PB6-1/8 24 12 6.5 4 106 1/4 F23PB6-1/4 28 14 9.7 4 228 1/8 F23PB8-1/8 28 14 6.5 6 198 1/4 F23PB8-1/4 28 14 9.7 6 25
Prestolok - Dimensions
Pneumatic 1.41
Adjustable male elbow - metric straight thread
1
M
N
J
B
C
C 4
1 B Part number C C4 J M N Weightg.
4 M3x0.5 C68PB4M3 10 10 3.25 18 23.0 154 M5x0.8 C68PB4M5 10 10 5.00 18 24.5 166 M5x0.8 C68PB6M5 12 11 5.00 20 25.5 24
Adjustable male elbow - BSPP
1
M
N
J
B
C
C 4
1 B Part number C C4 J M N Weightg.
4 1/8 C64PB4-1/8 10 14 6 18 26.5 224 1/4 C64PB4-1/4 10 19 9 18 31.5 376 1/8 C64PB6-1/8 12 14 6 20 30.0 306 1/4 C64PB6-1/4 12 19 9 20 33.0 418 1/8 C64PB8-1/8 14 14 6 22 30.0 358 1/4 C64PB8-1/4 14 19 9 22 35.0 478 3/8 C64PB8-3/8 14 22 9 22 36.0 6210 1/4 C64PB10-1/4 17 19 9 28 39.0 6610 3/8 C64PB10-3/8 17 22 9 28 40.0 8212 1/4 C64PB12-1/4 22 19 9 30 41.0 10612 3/8 C64PB12-3/8 22 22 9 30 42.0 11014 3/8 C64PB14-3/8 25 22 9 34 46.0 15814 1/2 C64PB14-1/2 25 27 12 34 50.5 188
Compact adjustable male elbow - metric straight thread
1
M
N
J
B
ø C
C4
1 B Part number øC C4 J M N Weightg.
4 M5x0.8 C68SPK4M5 10 12.5 5 17 18 16
Prestolok - Dimensions
Compact adjustable male elbow - BSPP
1
M
N
J
B
ø C
C4
1 B Part number øC C4 J M N Weightg.
4 1/8 C64SPB4-1/8 11 13 6 18 18.5 196 1/8 C64SPB6-1/8 13 13 6 24 19.5 256 1/4 C64SPB6-1/4 13 16 9 24 23.0 308 1/8 C64SPB8-1/8 15 13 6 26 21.0 388 1/4 C64SPB8-1/4 15 16 9 26 24.0 438 3/8 C64SPB8-3/8 15 19 9 26 24.0 48
10 1/4 C64SPB10-1/4 18 16 9 32 26.0 5510 3/8 C64SPB10-3/8 18 19 9 32 26.0 6012 1/4 C64SPB12-1/4 21 16 9 32 25.5 6712 3/8 C64SPB12-3/8 21 19 9 32 25.5 7512 1/2 C64SPB12-1/2 21 24 12 32 30.5 84
Pneumatic 1.42
Adjustable extended male elbow - BSPT
1
M
N
P
A
C
C4
PTC
Threads are treated with Parker Teflon®
Coating (PTC) sealing material
1 A Part number C C4 M N P Weightg.
4 1/8 C63LPB4-1/8 10 10 18 42.0 17.5 284 1/4 C63LPB4-1/4 10 14 18 46.0 11.0 526 1/8 C63LPB6-1/8 12 11 20 45.5 17.5 406 1/4 C63LPB6-1/4 12 14 20 49.5 11.0 608 1/8 C63LPB8-1/8 14 14 22 50.0 17.5 598 1/4 C63LPB8-1/4 14 14 22 52.5 11.0 64
Compact elbow - BSPT
1
M
N
PC
APTC
Threads are treated with Parker Teflon®
Coating (PTC) sealing material
1 A Part number C M N P Weightg.
4 1/8 C3PB4-1/8 14 18 21 17.5 236 1/8 C3PB6-1/8 14 20 21 17.5 246 1/4 C3PB6-1/4 14 20 21 11.0 258 1/8 C3PB8-1/8 14 22 23 17.5 248 1/4 C3PB8-1/4 14 22 23 11.0 2510 1/4 C3PB10-1/4 17 28 26 11.0 6710 3/8 C3PB10-3/8 17 28 26 11.5 8912 3/8 C3PB12-3/8 17 30 27 11.5 6912 1/2 C3PB12-1/2 17 30 31 15.0 7214 3/8 C3PB14-3/8 20 34 30 11.5 9714 1/2 C3PB14-1/2 20 34 33 15.0 97
Adjustable male elbow - BSPT
1
M
N
P
C
C4
PTCA
Threads are treated with Parker Teflon®
Coating (PTC) sealing material
1 A Part number C C4 M N P Weightg.
4 1/8 C63PB4-1/8 10 10 18 26.5 17.5 194 1/4 C63PB4-1/4 10 14 18 30.0 11.0 276 1/8 C63PB6-1/8 12 11 20 28.0 17.5 256 1/4 C63PB6-1/4 12 14 20 31.0 11.0 358 1/8 C63PB8-1/8 14 14 22 30.0 17.5 338 1/4 C63PB8-1/4 14 14 22 33.0 11.0 408 3/8 C63PB8-3/8 14 17 22 34.5 11.5 51
10 1/4 C63PB10-1/4 17 17 28 40.0 11.0 5910 3/8 C63PB10-3/8 17 17 28 39.0 11.5 6512 1/4 C63PB12-1/4 22 19 30 42.0 11.0 10512 3/8 C63PB12-3/8 22 19 30 41.0 11.5 10912 1/2 C63PB12-1/2 22 22 30 44.5 15.0 11814 3/8 C63PB14-3/8 25 22 34 46.0 11.5 15214 1/2 C63PB14-1/2 25 22 34 48.5 15.0 162
Prestolok - Dimensions
Pneumatic 1.43
Adjustable male run tee - BSPP
1
B
N
L
M
J
CC 4
1 B Part number C C4 J L M N Weightg.
4 1/8 R64PB4-1/8 10 14 6 44.5 18 26.5 264 1/4 R64PB4-1/4 10 19 9 49.5 18 31.5 416 1/8 R64PB6-1/8 12 14 6 50.0 20 30.0 336 1/4 R64PB6-1/4 12 19 9 53.0 20 33.0 448 1/8 R64PB8-1/8 14 14 6 52.0 22 30.0 428 1/4 R64PB8-1/4 14 19 9 57.0 22 35.0 548 3/8 R64PB8-3/8 14 22 9 58.0 22 36.0 6910 1/4 R64PB10-1/4 17 19 9 67.0 28 39.0 8510 3/8 R64PB10-3/8 17 22 9 68.0 28 40.0 10112 1/4 R64PB12-1/4 22 19 9 71.0 30 41.0 13312 3/8 R64PB12-3/8 22 22 9 72.0 30 42.0 13614 3/8 R64PB14-3/8 25 22 9 80.0 34 46.0 20314 1/2 R64PB14-1/2 25 27 12 84.5 34 50.5 232
Adjustable male branch tee - metric straight thread
1
M
L
N
J C 4
C
B
1 B Part number C C4 J L M N Weightg.
4 M5x0.8 S68PB4M5 10 10 5.00 36 18 24.5 206 M5x0.8 S68PB6M5 12 11 5.00 40 20 25.5 27
Adjustable male branch tee - BSPP
1
B
M
L
N
J C 4
C
1 B Part number C C4 J L M N Weightg.
4 1/8 S64PB4-1/8 10 14 6 36 18 26.5 264 1/4 S64PB4-1/4 10 19 9 36 18 31.5 416 1/8 S64PB6-1/8 12 14 6 40 20 30.0 336 1/4 S64PB6-1/4 12 19 9 40 20 33.0 448 1/8 S64PB8-1/8 14 14 6 44 22 30.0 428 1/4 S64PB8-1/4 14 19 9 44 22 35.0 548 3/8 S64PB8-3/8 14 22 9 44 22 36.0 6910 1/4 S64PB10-1/4 17 19 9 56 28 39.0 8510 3/8 S64PB10-3/8 17 22 9 56 28 40.0 10112 1/4 S64PB12-1/4 22 19 9 60 30 41.0 13312 3/8 S64PB12-3/8 22 22 9 60 30 42.0 13614 3/8 S64PB14-3/8 25 22 9 68 34 46.0 20314 1/2 S64PB14-1/2 25 27 12 68 34 50.5 232
Prestolok - Dimensions
Adjustable male run tee - metric straight thread
1 B Part number C C4 J L M N Weightg.
4 M5x0.8 R68PB4M5 10 10 5.00 42.5 18 24.5 206 M5x0.8 R68PB6M5 12 11 5.00 45.5 20 25.5 27
1
N
J
L
MC
C 4
B
Pneumatic 1.44
Adjustable male run tee - BSPT
1
NL
M
CC4
P
A
PTC
Threads are treated with Parker Teflon®
Coating (PTC) sealing material
1 A Part number C C4 L M N P Weightg.
4 1/8 R63PB4-1/8 10 10 44.5 18 26.5 111117.5 234 1/4 R63PB4-1/4 10 14 48.0 18 30.0 11.0 316 1/8 R63PB6-1/8 12 11 48.0 20 28.0 111117.5 286 1/4 R63PB6-1/4 12 14 51.0 20 31.0 11.0 388 1/8 R63PB8-1/8 14 14 52.0 22 30.0 111117.5 408 1/4 R63PB8-1/4 14 14 55.0 22 33.0 11.0 468 3/8 R63PB8-3/8 14 17 56.5 22 34.5 11.5 5810 1/4 R63PB10-1/4 17 17 68.0 28 40.0 11.0 7710 3/8 R63PB10-3/8 17 17 67.0 28 39.0 11.5 8412 1/4 R63PB12-1/4 22 19 72.0 30 42.0 11.0 13212 3/8 R63PB12-3/8 22 19 71.0 30 41.0 11.5 13512 1/2 R63PB12-1/2 22 22 74.5 30 44.5 15.0 14414 3/8 R63PB14-3/8 25 22 80.0 34 46.0 11.5 19714 1/2 R63PB14-1/2 25 22 82.5 34 48.5 15.0 207
Adjustable male branch tee - BSPT
1
M
L
NC
C4 P
APTC
Threads are treated with Parker Teflon®
Coating (PTC) sealing material
1 A Part number C C4 L M N P Weightg.
4 1/8 S63PB4-1/8 10 10 36 18 26.5 17.5 234 1/4 S63PB4-1/4 10 14 36 18 30.0 11.0 316 1/8 S63PB6-1/8 12 11 40 20 28.0 17.5 286 1/4 S63PB6-1/4 12 14 40 20 31.0 11.0 388 1/8 S63PB8-1/8 14 14 44 22 30.0 17.5 408 1/4 S63PB8-1/4 14 14 44 22 33.0 11.0 468 3/8 S63PB8-3/8 14 17 44 22 34.5 11.5 5810 1/4 S63PB10-1/4 17 17 56 28 40.0 11.0 7710 3/8 S63PB10-3/8 17 17 56 28 39.0 11.5 8412 1/4 S63PB12-1/4 22 19 60 30 42.0 11.0 13212 3/8 S63PB12-3/8 22 19 60 30 41.0 11.5 13512 1/2 S63PB12-1/2 22 22 60 30 44.5 15.0 14414 3/8 S63PB14-3/8 25 22 68 34 46.0 11.5 19714 1/2 S63PB14-1/2 25 22 68 34 48.5 15.0 207
Equal union
L
1O
1 Part number Circlips* L O Weightg.
4 HPB4 CIR4 33.0 10 115 HPB5 CIR5 34.5 11 156 HPB6 CIR6 36.0 12 138 HPB8 CIR8 38.0 14 1610 HPB10 CIR10 48.0 17 2712 HPB12 CIR12 48.0 21 5814 HPB14 CIR14 54.0 22 71
* Unions can be used as bulkhead unions. Simply mount two circlips inthe machined grooves provided. Three grooves are provided to allowfor a range of wall thickness : 1.5, 2 and 5 mm.
Equal union elbow
1
M
MC
1 Part number C M Weightg.
4 EPB4 10 18.0 126 EPB6 12 20.0 198 EPB8 14 22.0 2210 EPB10 17 28.0 3812 EPB12 22 30.0 7314 EPB14 25 34.0 116
Prestolok - Dimensions
Pneumatic 1.45
Equal union tee
1
M
L
MC
1 Part number C L M Weightg.
4 JPB4 10 36 18.0 165 JPB5 12 41 20.5 286 JPB6 12 40 20.0 228 JPB8 14 44 22.0 2910 JPB10 17 56 28.0 5712 JPB12 22 60 30.0 10014 JPB14 25 68 34.0 160
Tube end expander
2
L
L 1
1
1 2 Part number L L1 Weightg.
4 6 TEPB4-6 39 19 7
Tube end reducer
2
L
L 1
1
1 2 Part number L L1 Weightg.
6 4 TRPB6-4 40.0 22 88 4 TRPB8-4 39.5 22 108 6 TRPB8-6 41.5 22 1010 4 TRPB10-4 37.0 27 2710 6 TRPB10-6 43.0 27 1510 8 TRPB10-8 47.5 27 1612 6 TRPB12-6 38.0 27 2312 8 TRPB12-8 44.0 27 1712 10 TRPB12-10 52.0 27 2014 8 TRPB14-8 41.0 30 3114 10 TRPB14-10 51.0 30 2314 12 TRPB14-12 55.0 30 36
Plug
L
1
1 Part number L Weightg.
4 FNPB4 27 26 FNPB6 27 58 FNPB8 30 1210 FNPB10 30 2312 FNPB12 35 3514 FNPB14 36 46
Prestolok - Dimensions
Pneumatic 1.46
Bulkhead equal union
1
L
W
O
C 4C 4B
1 B Part number C4 L O W WeightMax. g.
4 M11x0.75 WPB4 16 33 11.5 6 186 M13x1 WPB6 19 35 13.5 6 228 M16x1.25 WPB8 22 36 16.5 6 2710 M18x1 WPB10 22 43 18.5 8 5512 M23x1.5 WPB12 27 46 23.5 10 10914 M24x1.5 WPB14 30 52 24.5 10 119
Single banjo - assembled
B
D
K ON
J
C
1
L
M
Y
These parts are delivered complete with sealing washer.
1 B Part number C D J K L M N O Y Weightg .
4 M5x0.8 COR8PB4M5 8 8.2 4.5 1.0 24.0 19.0 13.5 6.0 10 184 1/8 COR4PB4-1/8 14 14.4 6.0 1.5 29.5 22.5 19.5 8.5 14 316 1/8 COR4PB6-1/8 14 14.4 6.0 1.5 30.0 23.0 19.5 8.5 14 326 1/4 COR4PB6-1/4 17 18.4 9.0 2.0 33.0 24.5 21.0 9.0 17 488 1/8 COR4PB8-1/8 14 14.4 6.0 1.5 31.0 34.0 19.5 8.5 14 588 1/4 COR4PB8-1/4 17 18.4 9.0 2.0 34.0 25.5 21.0 9.0 17 8610 3/8 COR4PB10-3/8 22 21.6 9.0 2.5 43.0 32.0 25.5 11.0 22 122
Double banjo - assembled
B
D
K ON
J
C
1
L
M
Y
1 B Part number C D J K L M N O Y Weightg.
4 M5x0.8 COR8PB4DM5 8 8.2 4.5 1.0 38 19.0 13.5 6.0 10 234 1/8 COR4PB4D1/8 14 14.4 6.0 1.5 45 22.5 19.5 8.5 14 376 1/8 COR4PB6D1/8 14 14.4 6.0 1.5 46 23.0 19.5 8.5 14 386 1/4 COR4PB6D1/4 17 18.4 9.0 2.0 49 24.5 21.0 9.0 17 758 1/8 COR4PB8D1/8 14 14.4 6.0 1.5 48 24.0 19.5 8.5 14 76
These parts are delivered complete with sealing washer.
Prestolok - Dimensions
90O adjustable bulkhead union elbow
1 B Part number C C4 L L1 M O W WeightMax. g.
4 M11x0.75 WE6PB4 14 16 37 18.0 18.0 11.5 6 286 M13x1 WE6PB6 17 17 39 19.5 20.5 13.5 6 508 M16x1.25 WE6PB8 19 19 43 21.5 22.5 15.5 6 6510 M18x1 WE6PB10 22 22 54 29.0 28.5 18.5 8 12812 M23x1.5 WE6PB12 27 27 59 30.0 30.0 23.5 10 189
1
M
L
L1
W
C 4
C
O
B
Pneumatic 1.47
Stacking banjo bolt with seals
Single banjo bolt with seals
B
D
K
L
J
C
B
D
K
L
J
CB Part number C D J K L Weight
g.
M5x0.8 SC8UDM5-4 8 8.2 4.5 1.0 29.5 161/8 SC4UD1/8-4 14 14.4 6.0 1.5 41.0 191/4 SC4UD1/4-6 17 18.4 9.0 2.0 46.0 28
B Part number C D J K L Weightg.
M5x0.8 SC8UM5-4 8 8.2 4.5 1.0 18.5 101/8 SC4U1/8-4 14 14.4 6.0 1.5 25.5 151/4 SC4U1/4-6 17 18.4 9.0 2.0 30.0 273/8 SC4U3/8-10 22 21.6 9.0 2.5 34.5 124
Prestolok - Dimensions
Single banjo body only
Double banjo body only
1
M
X
Y
1 1
M
L
X
Y
1 Part number Part No. Part No. M X Y Weightsingle bolt stacking bolt g.
4 CORPB4-5 SC8UM5-4 SC8UDM5-4 19.0 10 10 84 CORPB4-10 SC4U1/8-4 SC4UD1/8-4 22.5 14 14 166 CORPB6-10 SC4U1/8-4 SC4UD1/8-4 23.0 14 14 176 CORPB6-13 SC4U1/4-6 SC4UD1/4-6 24.5 14 17 218 CORPB8-10 SC4U1/8-4 SC4UD1/8-4 24.0 14 14 448 CORPB8-13 SC4U1/4-6 SC4UD1/4-6 25.5 14 17 5910 CORPB10-17 SC4U3/8-10 SC4UD3/8-10 32.0 17 22 127
1 Part number Part No. Part No. L M X Y Weightsingle bolt stacking bolt g.
4 CORPB4D5 SC8UM5-4 SC8UDM5-4 38 19.0 10 10 134 CORPB4D10 SC4U1/8-4 SC4UD1/8-4 45 22.5 14 14 226 CORPB6D10 SC4U1/8-4 SC4UD1/8-4 46 23.0 14 14 236 CORPB6D13 SC4U1/4-6 SC4UD1/4-6 49 24.5 14 17 478 CORPB8D10 SC4U1/8-4 SC4UD1/8-4 48 24.0 14 14 61
Pneumatic 1.48
Cylinder ControlAccessoriesPneumatic
Pneumatic 2.2
PWR-A PWR-H PWR-B PWR-E PWR-L 33•• 3250 VQB••• PWB
Symbol
Body material:
Metal
Thermoplastic
Mounting:
On cylinder
In line
Panel
On valve
Adjustment:
By tool
By hand
Micrometer adjustment
Sizes
1
3/4 12 mm
1/2 10 mm
3/8 8 mm
1/4 6 mm
1/8 4 mm
M5
Refer to page 2.4 2.5 2.6 2.7 2.8 2.9 2.10-2.11 2.12-2.13 2.14-2.15
Cylinder Control Accessories
Speed/flow controllers Blockers
Pneumatic 2.3
PWR-HB PWE PWR-HE P4Q •••5 PWS PWP PWD 3047 VB••• PWA
8 mm
6 mm
4 mm
2.14-2.15 2.16-2.17 2.16-2.17 2.18 2.19 2.20-2.21 2.22 2.23 2.24 2.25 2.26
Cylinder Control Accessories
SensorsPWS
UnloadersPWE
Non return valves
&
Shuttle valves Optim-isers
SoftStart
Pneumatic 2.4
Speed/Flow Control PWR-A
• For direct mounting on to cylinder
• Allen key adjustment with lock nut
• Threaded ports or push-in connection
• Wide range of sizes
Operating and additional information
Operating pressure: 1 to 10 barPermissible fluids: Air or neutral gas 50micron or filtration, lubricated or notFlow: See table belowOperating temperature: -15OC to +60OCStorage temperature: -40OC to +70OCVibration resistance: Conforming to section 19-2 of Bureau Veritas regulationsMaximum connecting torque: 1/8 = 8 Nm ; 1/4 = 12Nm; 3/8 = 30Nm; 1/2 = 35NmBody material: Zinc alloyConnection thread: BrassAdjustment mode: By allen keyAdjustment locking: By hexagonal lock nut
Main data for Speed Controls, PWR-A SeriesThread Port Number of Qmax input Weight Order code
thread turns at 6 bar, l/min* Kg
G1/8 4 10 350 0,06 PWR-A1448G1/8 6 10 450 0,06 PWR-A1468G1/8 8 14 650 0,10 PWR-A1488G1/4 6 14 750 0,10 PWR-A1469G1/4 8 14 900 0,09 PWR-A1489G1/4 10 14 1850 0,14 PWR-A1499G3/8 8 14 1750 0,14 PWR-A1483G3/8 10 14 2050 0,13 PWR-A1493G1/8 12 20 2750 0,52 PWR-A1412G1/8 14 20 2750 0,53 PWR-A1422
Thread Port Number of Qmax input Weight Order codethread turns at 6 bar, l/min* Kg
G1/8 G1/8 10 450 0,07 PWR-A1888
G1/4 G1/4 14 900 0,11 PWR-A1889
G3/8 G3/8 14 1950 0,15 PWR-A1833
G1/2 G1/2 20 2750 0,55 PWR-A1822
With threaded connection Allen keyadjustment and locknut
Symbol
Symbol
With push-in connection Allen keyadjustment and locknut
H
L
K
4
B/2
B
ØA
D
Order code ØA B D H K L L2
PWR-A1448 17 18 14 45 17 32PWR-A1468 17 18 14 45 17 32PWR-A1888 17 18 14 45 17 36,5PWR-A1488 22 21 14 55 21 39PWR-A1489 22 21 17 55 21 39PWR-A1469 22 21 17 55 21 39PWR-A1899 22 21 17 55 21 43,5PWR-A1499 27 28 17 60 26 50PWR-A1483 27 28 24 60 26 50PWR-A1493 27 28 24 60 26 50PWR-A1833 27 28 24 60 26 55,5PWR-A1412 31 33 27 77 35 66PWR-A1422 31 33 27 77 35 66PWR-A1822 31 33 27 77 35 63,0
H
L2
K
4
B/2
B
ØA
D
D
* Screw closed
Pneumatic 2.5
Speed/Flow Control PWR-H
• For direct mounting on to cylinder
• Manual barrel adjustment with lock nut
• Push-in connection
• Wide range of sizes
Operating and additional information
Operating pressure: 1 to 10 barPermissible fluids: Air or neutral gas 50micron or filtration, lubricated or notFlow: See table belowOperating temperature: -15OC to +60OCStorage temperature: -40OC to +70OCVibration resistance: Conforming to section 19-2 of Bureau Veritas regulationsMaximum connecting torque: 1/8 = 8 Nm ; 1/4 = 12Nm; 3/8 = 30NmBody material: Thermo plasticConnection thread: BrassAdjustment mode: Rotating barrelAdjustment locking: Knurled lock nut
Main data for Speed Controls, PWR-H SeriesThread Push-in Adjustment Qmax input Weight Order code
connection angle at 6 bar, l/min* Kg
G1/8 4 285O 370 0,06 PWR-H1448
G1/8 6 285O 660 0,06 PWR-H1468
G1/4 6 285O 830 0,06 PWR-H1469
G1/4 8 285O 1200 0,06 PWR-H1489
G3/8 8 285O 2000 0,12 PWR-H1483
G3/8 10 285O 2000 0,12 PWR-H1493
Symbol
With push-in connection barreladjustment and locknut
K
D
P
H
L
B ØA
Order code ØA B D H K L P
PWR-H1448 22,5 21 19 35,0 20,7 47,0 12,7
PWR-H1468 22,5 21 19 35,0 20,7 47,0 12,7
PWR-H1469 22,5 21 19 75,0 20,7 47,0 12,7
PWR-H1489 22,5 21 19 35,0 20,7 47,0 12,7
PWR-H1483 29,0 28 27 42,5 25,0 60,0 15,0
PWR-H1493 29,0 28 27 42,5 25,0 60,0 15,0
* Screw closed
Pneumatic 2.6
Main data for Speed Controls, PWR-B Series
Thread Push-in Adjustment Qmax input Weight Order codeconnection angle at 6 bar, l/min* Kg
M5** 4 12 50 0,02 PWR-E1145
G1/8 4 7 350 0,06 PWR-B1148
G1/8 6 7 620 0,06 PWR-B1168
G1/4 6 10 430 0,08 PWR-B1169
G1/4 8 10 510 0,08 PWR-B1189
Symbol
With push-in connection knobadjustment and locknut
** Flow rate adjustment carried out using a screw driver, no locknut - Body in plastic
Speed/Flow Control PWR-B
• For direct mounting on to valve
• For direct mounting on to single acting cylinders
• Adjustment by knob (PWR-E adjusted by screw driver)
• Wide range of sizes
Operating and additional information
Operating pressure: 1 to 10 barPermissible fluids: Air or neutral gas 50micron or filtration, lubricated or notFlow: See table belowOperating temperature: -15OC to +60OCStorage temperature: -40OC to +70OCVibration resistance: Conforming to section 19-2 of Bureau Veritas regulationsMaximum connecting torque: M5 = 1Nm; 1/8 = 8 Nm ; 1/4 = 12NmBody material: Zinc alloyConnection thread: BrassAdjustment mode: Knurled knobAdjustment locking: Hexagonal lock nut
Order code ØA B H+ H- K L
PWR-E1145 11 8 17 17 7,2 21,0
PWR-B1148 14 18 46 40 10,0 25,0
PWR-B1168 14 18 46 40 10,0 25,0
PWR-B1169 16 21 49 42 11,0 28,5
PWR-B1189 16 21 49 42 11,0 28,5
H
LB/2
B
ØA
K
* Screw closed
Pneumatic 2.7
Speed/Flow Control PWR-E
• For direct mounting on to cylinder
• Allen key adjustment with friction locking
• Protective cap
• Wide range of sizes
Operating and additional information
Operating pressure: 1 to 10 barPermissible fluids: Air or neutral gas 50micron or filtration, lubricated or notFlow: See table belowOperating temperature: -15OC to +60OCStorage temperature: -40OC to +70OCVibration resistance: Conforming to section 19-2 of Bureau Veritas regulationsMaximum connecting torque: M5 = 1Nm; 1/8 = 8 Nm ; 1/4 = 12Nm; 3/8 = 30NmBody material: Thermo plasticConnection thread: BrassAdjustment mode: Allen keyAdjustment locking: Friction cap
Main data for Speed Controls, PWR-E Series
Thread Push-in Number Qmax input Weight Order codeconnection of turns at 6 bar, l/min* Kg
M5** 4 12 50 0,02 PWR-E1445
G1/8 4 14 290 0,04 PWR-E1448
G1/8 6 14 650 0,04 PWR-E1468
G1/4 6 18 650 0,05 PWR-E1469
G1/4 8 18 1200 0,05 PWR-E1489
G3/8 8 18 1350 0,07 PWR-E1483
G3/8 10 18 2100 0,08 PWR-E1493
Symbol
With push-in connection Allen keyadjustment friction locking
* Screw closed** Flow rate adjustment carried out using a screw driver.
A
L
K
C
H
D
A
L
K
H
C
E
3 mm (1)
4 mm (2)
D
***
Order code ØA C D E H K L
PWR-E1445 11 4,0 8 17 7,2 21
* PWR-E1448 11 8,0 14 16,5 45 23,8 24
* PWR-E1468 11 8,0 14 16,5 45 23,8 24
** PWR-E1469 16 10,5 17 21,0 49,3 26,5 27
** PWR-E1489 16 10,5 17 21,0 49,3 26,5 27
** PWR-E1483 20 11,5 22 23,0 56,8 29,8 33
** PWR-E1493 20 11,5 22 23,0 56,8 29,8 33
Pneumatic 2.8
Main data for Speed Controls, PWR-L Series
Push-in Adjustment Qmax input Weight Order codeconnection angle at 6 bar, l/min* Kg
4 13 200 0,02 PWR-L1444
6 12 400 0,04 PWR-L1466
8 15 720 0,06 PWR-L1488
10 18 1360 0,13 PWR-L1499
12 20 1950 0,15 PWR-L1411
Symbol
With push-in connection knobadjustment and locknut
Speed/Flow Control PWR-L
• For inline or surface mounting
• Manual adjustment by knob with lock nut
• Instant push-in fitting
• High flow
• Wide range of sizes
Operating and additional information
Operating pressure: 1 to 10 barPermissible fluids: Air or neutral gas 50micron or filtration, lubricated or notFlow: See table belowOperating temperature: -15OC to +70OCStorage temperature: -20OC to +70OCVibration resistance: Conforming to section 19-2 of Bureau Veritas regulationsBody material: Thermo plasticAdjustment mode: Knurled knobAdjustment locking: Hexagonal lock nut
H e
B
L
H1
F
F1Type B F F1 e H+ H- H1 L Q
PWR-L1444 12,0 14 * 6 25,5 21,5 6,5 39,0 10,5
PWR-L1466 17,0 19 * 7 32,5 27,5 7,5 54,0 17,0PWR-L1488 18,5 24 11 7 34,5 28,5 9,0 60,5 19,0PWR-L1499 24,0 30 14 7 38,5 29,5 11,5 76,0 25,0PWR-L1411 28,0 32 14 8 42,0 32,0 12,5 86,0 28,0
* Screw closed
Pneumatic 2.9
Micrometer Flow Controls 33**
For detailed information see technical leaflet 2140
• Micrometer type adjustment
• Fine control
• Integral mounting hole
• Non-return and needle valves
E
C
G
H
J
1 9
1
0
F
A
D2
D1
B
Order Port A B C D1 D2 E F G H Jcode size open closed
337A G1/8 14,5 14,5 19 51 46 40 12 - - -337B G1/4 17,5 18,0 19 58 51 50 12 4,8 19 10338A G1/8 14,5 14,5 19 51 46 40 12 - - -338B G1/4 17,5 18,0 19 58 51 50 12 4,8 19 10
Micrometer Flow Control Valves - Dimensions
Flow Control with By-pass
Symbol
Flow Control with By-directional Control
Symbol
1
2
3
4
5
6
1 2 3 4 5 6 7 8 9 10 11 12 13
G1/8
G1/4
Num
ber
of t
urns
Litres/s
Operating and additional information
Operating pressure: 0 to 17 barFlow: See curve belowOperating temperature: -40OC to +80OCBody material: BrassControl knob: AluminiumAdjustment mode: Knurled knob
Thread Number Qmax input Weight Order codeof turns at 6 bar, l/min Kg
G1/8 5 300 0,076 337A
G1/4 6 780 0,134 337B
Thread Number Qmax input Weight Order codeof turns at 6 bar, l/min Kg
G1/8 5 300 0,078 338A
G1/4 6 780 0,132 338B
Pneumatic 2.10
Heavy Duty Inline Flow Regulator 3250
• Screw driver or hand adjustment
• Rugged brass bodies
• Panel mounted versions
• High flow rate
• High flow by-pass
• Wide range of sizes
Operating and additional information
Operating pressure: 0 to 28 bar for air - 0 to 55 bar oil or waterOperating temperature: -10OC to +80OCBody material: BrassControl knob: BrassAdjustment mode: Knurled knob or screw driver adjustment
Thread Number Qmax input Weight Order codeof turns at 6 bar, l/min* Kg
Symbol
Standard Type
Symbol
Panel Mounting Type
Symbol
Panel Mounted Hand Adjustment Type
G1/8 6 1320 0,114 B3250X
G1/4 5 2880 0,224 B3250AB
G3/8 5 6300 0,378 B3250BB
G1/2 5 7680 0,792 B3250CB
G3/4 4,5 10680 1,300 B3250DB
Thread Number Qmax input Weight Order codeof turns at 6 bar, l/min* Kg
G1/8 6 1320 0,120 B3250XP
G1/4 5 2880 0,226 B3250ABP
Thread Number Qmax input Weight Order codeof turns at 6 bar, l/min* Kg
G1/8 6 1320 0,128 B3250HX
G1/4 5 2880 0,238 B3250HA
Pneumatic 2.11
A
B
D
C
A
B
C
A
B
D
C
Flow Control Valves, Panel Mounted Hand Adjustment Type
Order code Port A B C Dsize
B3250HX G1/8 44 57 21 20
B3250HA G1/4 57 70 32 25
Dimensions, Flow Control Valves, B3250 Series
Flow Control Valves, Standard Type
Order code Port A B Csize
B3250X G1/8 44 40 21
B3250AB G1/4 57 51 28
B3250BB G3/8 68 64 35
B3250CB G1/2 79 78 41
B3250DB G3/4 90 92 51
Flow Control Valves, Panel Mounted Type
Order code Port A B C Dsize
B3250XP G1/8 44 40 21 20
B3250ABP G1/4 57 51 32 25
Heavy Duty Inline Flow Regulator 3250
Pneumatic 2.12
Thread Qmax input Weight Order codeat 6 bar, l/min* Kg
G1/4 1320 0,11 VQB22-Q-0WG-5
G1/2 3600 0,27 VQB42-Q-0WG-5
Speed Flow Control Valves VQB
• Integral mounting holes
• Screw driver adjustable
• Panel mounting option
• Roller for mechanical actuation available
For detailed information see technical leaflet 9127 0035-02
Working pressure Max 10 barWorking temperature -20 °C to +70 °C
Operating information
.
Symbol
Flow Control Valves with By-pass
Symbol
Flow Control Valves with By-directional Control
Symbol
Roller Operated, Flow Control Valves with By-pass
knob and nut for Panel Mounting
Thread Number Qmax input Weight Order codeof turns at 6 bar, l/min* Kg
G1/8 13 72 0,03 VQB12-Q-0X-5*G1/8 13 240 0,03 VQB12-Q-0-5G1/4 13 1320 0,07 VQB22-Q-0-5G1/2 13 3600 0,27 VQB42-Q-0-5
Thread Number Qmax input Weight Order codeof turns at 6 bar, l/min* Kg
G1/8 13 72 0,03 VQB12-0X-5*G1/8 13 240 0,03 VQB12-0-5G1/4 13 1320 0,07 VQB22-0-5G1/2 13 3600 0,26 VQB42-0-5
To Suit Weight Order codeKg
VQB12 0,008 9128 1772-12VQB22 0,014 9128 1772-22VQB42 0,037 9128 1772-42
* Extra fine adjustment
Pneumatic 2.13
P
O
KI
T
G
S
LH
A
B
C
DR
M
F
E
J
BO
D
E
F
G
C
L
S
A
H K
X
Order A B C D E F G H Icode
VQB12-Q-OX-5 49 42 22 15 6,5 G1/8 5,8 24 M12x1VQB12-Q-O-5 49 42 22 15 6,5 G1/8 5,8 24 M12x1VQB22-Q-O-5 64 53 30 21 8,5 G1/4 7,0 32 M16x1VQB42-Q-O-5 99 85 50 36 16,5 G1/2 7,0 50 M24x1,5
Flow Control Valves - Dimensions
Order K L M O P R S Tcode
VQB12-Q-OX-5 1,2 32 15 - - - 13,5 8,8VQB12-Q-O-5 1,2 32 15 - - - 13,5 8,8VQB22-Q-O-5 1,2 42 20 6,0 M4 7 16,0 10,0VQB42-Q-O-5 1,8 62 30 19,5 M4 7 20,5 15,2
Dimensions, Flow Control Valves, VQB Series
Order A B C D E F G Hcode
VQB22-Q-OWG-5 64,5 42 20 68 55 30 21 18,5VQB42-Q-OWG-5 64,5 62 30 88 75 50 36 5,0
Roller operated, Flow Control Valves - Dimensions
Order J K L O S Xcode
VQB22-Q-OWG-5 16 6 8,5 32 7 G1/4VQB42-Q-OWG-5 16 6 16,5 50 7 G1/2
Speed Flow Control Valves VQB
Pneumatic 2.14
Blocker and Blocker/Flow regulator PWB/PWR-HB
Operating pressure: 1 to 10 barPermissible fluids: Air or neutral gas 50micron or filtration, lubricated or notFlow: See table oppositeOperating temperature: -15OC to +60OCStorage temperature: -40OC to +70OCNo. of operations with dry air at 6 bar 20OC 1 Hz: 10 millionMaximum operating freqency: 10HzVibration resistance: Conforming to section 19-2 of Bureau Veritas regulationsMaximum connecting torque: 1/8 = 8Nm ; 1/4 = 12Nm; 3/8 = 30Nm; 1/2 = 35NmBody material (Blocker): Zinc alloyBody material (Blcoker/Flow Regulator): Thermo plasticConnection thread: BrassAdjustment mode (Blocker/Flow Regulator): Rotating barrelAdjustment locking (Blocker/Flow Regulator): Knurled lock nut
• For direct cylinder mounting
• Blocker only or multifunction options
• Threaded or push-in ports
• Blocker/Flow Regulator device adjustablewith manual barrel
• Wide range of sizes
Operating information
Connection Thread Connection for Qmax input Weight Orderfor pilot port tube ,Ømm at 6 bar, l/min* kg code
Ø4mm G1/8 4 330 0,13 PWR-HB1448G1/8 6 410 0,13 PWR-HB1468G1/4 6 420 0,13 PWR-HB1469G1/4 8 420 0,13 PWR-HB1489G3/8 8 1150 0,18 PWR-HB1483G3/8 10 1150 0,18 PWR-HB1493
Symbol
With Push-in Connection, Barrel Adjustment and Locknut
Connection Thread Connection for Qmax input Weight Orderfor pilot port tube ,Ømm at 6 bar, l/min* kg code
Push-in Ø4mm G1/8 G1/4 500 0,18 PWB-A1898G1/4 G1/4 650 0,18 PWB-A1899
M5* G3/8 G3/8 1300 0,19 PWB-A1833G1/2 G1/2 2300 0,48 PWB-A1822
Symbol
With Threaded Connection
* Available with Ø4mm push-in connection, add4 to the end of the Order code; example: PWB-A18994
Connection Thread Connection for Qmax input Weight Orderfor pilot port tube ,Ømm at 6 bar, l/min* kg code
Push-in Ø4mm G1/8 6 500 0,15 PWB-A1468G1/4 6 650 0,15 PWB-A1469G1/4 8 650 0,15 PWB-A1489G3/8 8 1300 0,18 PWB-A1483G3/8 10 1300 0,18 PWB-A1493G1/2 12 2300 0,50 PWB-A1412
Symbol
With Push-in Connection
Pneumatic 2.15
2bar 4bar 6bar 8bar 2bar 4bar 6bar 8barrrrrPWR-HB1448 2,3 2,7 3,05 3,4 1,5 1,8 2,15 2,4PWR-HB1468 2,3 2,7 3,05 3,4 1,5 1,8 2,15 2,4PWR-HB1469 2,3 2,7 3,05 3,4 1,5 1,8 2,15 2,4PWR-HB1489 2,3 2,7 3,05 3,4 1,5 1,8 2,15 2,4PWR-HB1483 2,45 2,75 3,05 3,4 1,4 1,7 2,0 2,35PWR-HB1493 2,45 2,75 3,05 3,4 1,4 1,7 2,0 2,35
Pilot Depilot
operating pressure operating pressure
Combined speedcontrollers& blockers
2bar 4bar 6bar 8bar 2bar 4bar 6bar 8barrrrrPWB-A1898 2,3 2,7 3,05 3,4 1,5 1,8 2,15 2,4PWB-A1899 2,3 2,7 3,05 3,4 1,5 1,8 2,15 2,4PWB-A1833 2,45 2,75 3,05 3,4 1,4 1,7 2,,0 2,35PWB-A1822 3,05 3,4 3,7 4,05 1,75 2,1 2,4 2,8
Blockers Pilot Depilot
operating pressure operating pressure
Order ØA B D H K Lcode
PWB-A1468 22 21 24 59 19,5 39PWB-A1469 22 21 24 53 13,5 39PWB-A1489 22 21 24 53 13,5 39PWB-A1483 27 28 24 53 14,0 50PWB-A1493 27 28 24 53 14,0 50PWB-A1412 31 33 30 66 24,0 66
Blocker with push-in connection - dimensions
ØA
H
K
B
L
D
ØA
H
K
B
L
D
D
Order ØA B D H K Lcode
PWB-A1898 22 21 24 59 19,5 43,5PWB-A1899 22 21 24 53 13,5 43,5PWB-A1833 27 28 24 53 14,0 55,5PWB-A1822 31 33 30 66 24,0 63,0
Blocker with threaded connection - dimenesions
H
P
KØ
A
L
D
B
Order ØA B D H K L Pcode
PWR-HB1448 22,5 21 24 59 19,5 47,0 12,5PWR-HB1468 22,5 21 24 59 19,5 47,0 12,5PWR-HB1469 22,5 21 24 53 13,5 47,0 12,5PWR-HB1489 22,5 21 24 53 13,5 47,5 12,5PWR-HB1483 29,0 28 24 53 15,5 60,0 15,0PWR-HB1493 29,0 28 24 53 15,5 60,0 15,0
Blocker/Flow regulator - dimensions
Blocker and Blocker/Flow regulator PWB/PWR-HB
Pneumatic 2.16
Unloader and Unloader/Flow Regulator PWE/PWR-HE
Operating pressure: 1 to 10 barPermissible fluids: Air or neutral gas 50micron or filtration, lubricated or notFlow: See table belowOperating temperature: -15OC to +60OCStorage temperature: -40OC to +70OCNo. of operations with dry air at 6 bar 20OC 1 Hz: 1 millionMaximum operating freqency: 1HzVibration resistance: Conforming to section 19-2 of Bureau Veritas regulationsMaximum connecting torque: 1/8 = 8Nm ; 1/4 = 12Nm; 3/8 = 30Nm; 1/2 = 35NmBody material (Unloader): Zinc alloyBody material (Unloader/Flow Regulator): Thermo plasticConnection thread: BrassAdjustment mode (Unloader/Flow Regulator): Rotating barrelAdjustment locking (Unloader/Flow Regulator): Knurled lock nut
• For direct cylinder mounting
• Unloader only or multifunction options
• Threaded or push-in ports
• Unloader/Flow Regulator device adjustable withmanual barrel
• Wide range of sizes
Operating information
Symbol
Combined Unloader/Flow Control with Push-in Connection
Barrel adjustment and locknut
Connection Thread Connection for Qmax input Weight Orderfor pilot port tube ,Ømm at 6 bar, l/min* kg code
Push-in Ø4mm G1/8 6 1450 0,13 PWE-A1468G1/4 8 2800 0,15 PWE-A1489G3/8 10 3950 0,18 PWE-A1493G1/2 12 4750 0,50 PWE-A1412
Symbol
Unloader with Push-in Connection
Connection Thread Connection for Qmax input Weight Orderfor pilot port tube ,Ømm at 6 bar, l/min* kg code
Push-in Ø4mm G1/8 G1/4 1450 0,13 PWE-A1898G1/4 G1/4 2800 0,16 PWE-A1899G3/8 G3/8 3950 0,19 PWE-A1833G1/2 G1/2 4750 0,48 PWE-A1822
Symbol
Unloader with Threaded Connection
Connection Thread Connection for Qmax input Weight Orderfor pilot port tube ,Ømm at 6 bar, l/min* kg code
Push-in Ø4mm G1/8 4 1450 0,10 PWR-HE1448G1/8 6 1450 0,10 PWR-HE1468G1/4 6 2800 0,10 PWR-HE1469G1/4 8 2800 0,10 PWR-HE1489G3/8 8 3950 0,18 PWR-HE1483G3/8 10 3950 0,18 PWR-HE1493
Pneumatic 2.17
Unloader and Unloader/Flow Regulator PWE/PWR-HE
3bar 6bar 8bar 3bar 6bar 8barrrrrPWE-A1468/1898 1,75 3,35 4,5 0,95 2,05 2,75PWE-A1489/1899 2,35 4,3 5,9 0,95 2,05 2,75PWE-A1493/1833 2,0 4,1 4,8 0,90 2,0 3,0PWE-A1412/1822 1,4 3,35 5,0 0,90 2,2 3,5
Unloaders Pilot Depilot
operating pressure operating pressure
3bar 6bar 8bar 3bar 6bar 8barrrrrPWR-HE1448 1,75 3,35 4,5 0,95 2,05 2,75PWR-HE1468 1,75 3,35 4,5 0,95 2,05 2,75PWR-HE1469 2,35 4,3 5,9 0,95 2,05 2,75PWR-HE1489 2,35 4,3 5,9 0,95 2,05 2,75PWR-HE1483 2,0 4,1 4,8 0,90 2,0 3,0PWR-HE1493 2,0 4,1 4,8 0,90 2,0 3,0
Pilot Depilot
operating pressure operating pressure
Combinedspeed controllers& unloaders
ØA
H
K
D
ØA
H
K
D
D
H
P
KØ
A
L
D
B
Order ØA B D H K Lcode
PWE-A1468 22 21 24 54 13 39PWE-A1489 22 21 24 54 13 39PWE-A1493 27 28 24 62 16 50PWE-A1412 31 33 30 73 24 66
Push-in Connection
Unloaders - Dimensions
Order ØA B D H K L2code
PWE-A1898 22 21 24 54 13 43PWE-A1899 22 21 24 54 13 43PWE-A1833 27 28 24 62 16 55PWE-A1822 31 33 30 73 24 63
Threaded Connection
Order ØA B D H K L Pcode
PWR-HE1448 22,5 21 24 59 19,5 47,0 12,5PWR-HE1468 22,5 21 24 59 19,5 47,0 12,5PWR-HE1469 22,5 21 24 53 13,5 47,0 12,5PWR-HE1489 22,5 21 24 53 13,5 47,5 12,5PWR-HE1483 29,0 28 24 53 15,5 60,0 15,0PWR-HE1493 29,0 28 24 53 15,5 60,0 15,0
Unloaders/Flow Regulators - Dimensions
B
L2
B
L
Pneumatic 2.18
Quick exhaust valves P4Q
• Increases piston speeds, super sensitive diaphragm
• Extremely low operating differential
• Virtually stiction free
• May be used as differential shuttle valve
• High temperature option
Symbol
Order Port A B Ccode Size
P4Q-B*12 G1/4 52 25 62P4Q-B*13 G3/8 52 25 62P4Q-B*14 G1/2 73 38 86P4Q-B*16 G3/4 73 38 86
Quick Exhaust Valves - Dimensions
B
A
C
Port Cv Weight OrderSize Rating kg Code
G1/4 2,3 0,20 P4Q-BA12G3/8 3,6 0,18 P4Q-BA13G1/2 6,6 0,50 P4Q-CA14G3/4 7,3 0,44 P4Q-CA16
Standard version
Port Cv Weight OrderSize Rating kg Code
G1/4 2,3 0,20 P4Q-BV12G3/8 3,6 0,18 P4Q-BV13G1/2 6,6 0,50 P4Q-CV14G3/4 7,3 0,44 P4Q-CV16
High temperature version
Operating informationOperating pressure: 0,2 to 10 barOperating temperature (Standard): -10OC to +80OCOperating temperature (High): -10OC to +180OCBody material: AluminiumDiaphragm material (Standard): NitrileDiaphragm material (High): Viton
Pneumatic 2.19
Shuttle Valves
Operating information
• Allows two separate signals to be applied to the air pilot
• 0,6 bar differential, Viton seals as standard
Port Qmax input Weight OrderSize at 6 bar, l/min* kg Code
M5 36 0,040 M33005G1/8 509 0,100 B43005BG1/4 1076 0,172 B53005A
Symbol
Order Port A B C D E F G Hcode Size
M33005 M5 27,5 24 15 16,0 15 6 6,3 3,2M43005B G1/8 44,0 24 15 16,0 25 6 9,5 4,5B53005A G1/4 52,0 30 22 20,5 35 10 8,5 5,5
Shuttle Valves - Dimensions
P
¯HG E
B
A C
D
Operating pressure: 1,3 to 17 barFlow: See table belowOperating temperature: -10OC to +60OCBody material M5 and G1/8: AluminiumBody material G1/4 ZincShuttle ball material: Plastic
Pneumatic 2.20
Operating pressure: 0 to 10 barPermissible fluids: Air or neutral gas 50micron or filtration, lubricated or notOperating temperature: -15OC to +60OCStorage temperature: -40OC to +70OCNo. of operations with dry air at 6 bar 20OC 1 Hz: 10 millionMaximum operating frequency: 10 HzOutput characteristics: Pneumatic: Flow @ 6 bar 90l/m
Electrical: C/contact 2,5A/250V AC, 5W 48V DCElectronic: PNP N/C or N/O 10 to 30V 75 mA DC
Maximum connecting torque: M5 = 1Nm; 1/8 = 8Nm; 1/4 = 12Nm; 3/8 = 30Nm; 1/2 = 35NmBody material: Thermo plasticConnection thread: Brass
Operating information
Back Pressure Sensor - Modular PWS
• Detects stoppage of a cylinder due to a pressuredrop in the exhaust chamber
• For direct mounting to cylinders
• Choice of pneumatic, electrical or electronic output
• Wide range of sizes
Sensing Output Output Output Weight Orderfunction function Connection characteristics kg code
Exhaust back Pneumatic Push-in NO valve flow rate 0,09 PWS-P111pressure decay Ø4mm at 6 bar 1,5 l/s
Electrical 3 wires CO contact 0,08 PWS-M1012~Ve = 3A 0,5mm2 12 to 230V ~ / 10VA*
length 2m 12 to 48 VDC/5W*
Solid state 3 wires PNP type NC 0,07 PWS-E1010,1mm2 10/30VDC**length 2m 75 mA, NO 0,07 PWS-E111
Plug-in Sensors
* Suitable for low currents : 250 V ~ / 4 mA ; 24 VDC / 10 mA ** Including ripple
Assembly
Allen screw
Lockingclip Ø4 mm push-in
connection
Black(BK) Blue
(BU)
Brown(BN)
Black(BK)
Blue(BU)
Brown(BN)
Banjo socket
Plug-in sensor
Connection
BKBU
BN
Pneumatic output sensor: Ø4 mm push-in
Output signal connection
load
2BK
-3 BU
+
-
C1
+1 BN
Electric output sensor
Solid state output sensor
Banjo SocketsThread Size for Female Tool Required Weight Order codeCylinder Port Thread Kg
M5 M5 8mm flat spanner 0,04 PWS-B155G1/8 G1/8 5mm Allen key 0,04 PWS-B188G1/4 G1/4 8mm Allen key 0,05 PWS-B199G3/8 G3/8 10mm Allen key 0,07 PWS-B133G1/2 G1/2 12mm Allen key 0,11 PWS-B122
Dimensions and pilotingpressures opposite page
All back pressure sensors are a combination of two distinct parts:a banjo socket + a plug-in sensor.
Pneumatic 2.21
Back Pressure Sensor - Mono block PWS
&
Back Pressure Sensor for Cylinder Mounting
Thread Thread Bore Weight Order codeCylinder Port Supply Port Ømm Kg
M5 M5 2 0,10 PWS-C5145G1/8 G1/8 5 0,11 PWS-C5148G1/4 G1/4 7 0,10 PWS-C5149G3/8 G3/8 10 0,17 PWS-C5143G1/2 G1/2 14 0,15 PWS-C5142
Symbol
Operating pressure: 0 to 10 barPermissible fluids: Air or neutral gas 50micron or filtration, lubricated or notOperating temperature: -15OC to +70OCStorage temperature: -20OC to +70OCNo. of operations with dry air at 6 bar 20OC 1 Hz: 10 millionMaximum operating frequency: 1 HzOutput characteristics: Flow @ 6 bar 90l/mMaximum connecting torque: M5 = 1Nm; 1/8 = 8Nm; 1/4 = 12Nm; 3/8 = 30Nm; 1/2 = 35NmBody material: Zinc alloy / Thermo plasticConnection thread: Brass
Operating information
• Detects stoppage of a cylinder due to a pressuredrop in the exhaust chamber
• Single unit design
• For direct mounting to cylinders
• Pneumatic output
• Wide range of sizes
H
LB/2
ØA
Ø4
B
Order ØA B H Lcode
PWS-CS145 19 11,0 16,0 42PWS-CS148 22 16,5 29,0 40PWS-CS149 22 23,5 26,0 43PWS-CS143 22 23,5 36,5 43PWS-CS142 22 32,0 29,5 48
Back Pressure Sensors - Mono block - Dimensions
H
K
C
B
LB/2
18,5
24,5
2m32
Ø16
22
20
18 X 14
2m32
Order C B H K Lcode
PWS-B155 8 11 16,5 10 17PWS-B188 5 16 20,0 10 20PWS-B199 8 21 20,0 10 22PWS-B133 10 28 22,0 12 25PWS-B122 12 33 26,0 14 26
Back Pressure Sensors - Modular - Dimensions
Plug-in & Monoblockback pressure sensors
6bar 6barPWS-P111 4,4 0,4PWS-M1012 1,0 0,6PWS-E101 & E111 0,7 0,5PWS-C 1,6 ±0,2 0,3
Pilot Depilot
operating pressure operating pressure
Pneumatic 2.22
Optimisers PWP
Thread size for Push-in Qmax input Weight Ordercylinder port Connection, Ømm at 6 bar, l/min* kg code
G1/8 6 570 0,30 PWP-B1268G1/4 6 530 0,30 PWP-B1269G1/4 8 870 0,30 PWP-B1289G1/4 10 1400 0,54 PWP-B1299G3/8 10 1530 0,55 PWP-B1293
Symbol
With Push-in Connection
* Adjustment is carried out using a 6mm Allen key or a knurled knob.
With setting indicator*
Thread size for Push-in Qmax input Weight Ordercylinder port Connection, Ømm at 6 bar, l/min* kg code
G1/8 G1/8 570 0,34 PWP-B1888G1/4 G1/4 870 0,34 PWP-B1899G3/8 G3/8 3200 0,62 PWP-B1833
Symbol
With Threaded Connection
* Adjustment is carried out using a 6mm Allen key or a knurled knob.With setting indicator*
Clip-in knurled adjustment knob for optimisers Weight kg Order code
0,03 PWP-Z13
Operating pressure: 1 to 8 barPermissible fluids: Air or neutral gas 50micron or filtration, lubricated or notFlow: See table belowOperating temperature: -15OC to +70OCStorage temperature: -20OC to +70OCMaximum connecting torque: 1/8 = 8Nm ; 1/4 = 12Nm; 3/8 = 30NmBody material: Zinc alloyConnection thread: BrassAdjustment mode: Allen key
• Adjusts the actuating force developed by a cylinder
• For direct mounting to power valve
• Threaded or push-in ports
• Adjustment by allen key or knurled knob
• Wide range of sizes
Operating information
Order ØA B D H K L L2code
PWP-B1268 22 21 19 58,0 13,5 39PWP-B1269 22 21 19 58,0 13,5 39PWP-B1289 22 21 19 58,0 13,5 39PWP-B1299 27 28 19 65,5 16,5 50PWP-B1293 27 28 27 65,5 16,5 50PWP-B1888 22 21 19 58,0 13,5 43PWP-B1899 22 21 19 58,0 13,5 43PWP-B1833 27 28 27 65,5 16,5 55
Dimensions
H
L
K
6
B/2
B
ØAD
H
L2
K
6
B/2
B
ØA
D
D
Pneumatic 2.23
Soft Start PWD
Thread Push-in Flow rate at Weight OrderConnection, Ømm 6 bar, l/min kg code
G1/4 8 1500 0,07 PWD-P2489G1/4 8 2000 0,12 PWD-P2499G3/8 10 2000 0,13 PWD-P2493
Symbol
With Push-in Connection
H
L
K
B/2
ØA
D
BC
Order ØA B ØC D H K Lcode maxi
PWD-P2489 15,0 20 G1/4 17 61 8,5 27,5PWD-P2499 19,5 25 G1/4 22 62 11,8 41,0PWD-P2493 19,5 25 G3/8 22 62 11,8 41,0
Dimensions
Operating pressure: 3 to 10 barPermissible fluids: Air or neutral gas 50micron or filtration, lubricated or notFlow: See table belowOperating temperature: -15OC to +70OCStorage temperature: -20OC to +70OCNo. of operations with dry air at 6 bar 20OC 1 Hz: 1/4 : 10 million; 3/8 : 5 millionMaximum operating frequency: 1 HzMaximum connecting torque: 1/4 = 12Nm; 3/8 = 30NmBody material: Thermo plasticConnection thread: BrassAdjustment mode: Allen key
• Enables a gradual increase in pressure
• For direct mounting to power valve
• Instant push-in connections
• Adjustment by allen key
Operating information
Allen key adjustment of flow ratefor slow pressure increase.
Operation
These compact devices with push-intube connection are fitted to the N°1port of the power valve.
Supplypressure
TimeAdjustable T
With Soft Starter
P
~ 0,5 P
Allen key
Flat spanner
Supplypressure
Operating pressure
Soft Starter
A Soft starter provides a progressive increase inpressure, in a section of a pneumatic system.When pressure reaches half the supply pressure,full pressure is applied automatically.
Adjustment Mounting
Pneumatic 2.24
Non return valve - Male thread 3047
• Rugged brass body design
• Standard or high temperature options
• Low 0,1 bar operating pressure
• Full flow in one direction only
• Compact design
BA
Standard version
Symbol
Order Port A Bcode Size
3047X/XV G1/8 51 213047B/BV G1/4 49 21
Dimensions
Thread size Weight Orderkg code
G1/8 0,68 3047XG1/4 0,72 3047B
High temperature version
Symbol Thread size Weight Orderkg code
G1/8 0,68 3047XVG1/4 0,72 3047BV
Operating informationOperating pressure: 0,1 to 17 barFlow: Qmax at 6 bar, l/min* 1/8 = 1200L/m; 1/4 - 1350 L/mOperating temperature: Standard: -26OC to +85OC
High: -26OC to +230OCBody material: BrassSeal material Standard: Nitrile
High: Viton
Pneumatic 2.25
Non return valve - Female VB
• Aluminium bodies
• Long life
• Low opening pressure
• Full flow in one direction only
L
N F
Order F L Ncode
VB12-Q-NQ-5 G1/8 31 14VQB22-Q-NQ-5 G1/4 40 17VB42-Q-NQ-5 G1/2 59 27
Dimensions
VB - Aluminium
Symbol Port size Weight Orderkg code
G1/8 0,01 VB12-Q-NQ-5G1/4 0,01 VB22-Q-NQ-5G1/2 0,05 VB42-Q-NQ-5
Operating informationOperating pressure: 0,1 to 10 barOperating temperature: -20OC to +70OCBody material: Anodised aluminiumSeal material Nitrile
Pneumatic 2.26
Non Return Valve - Push-in PWA
ØH
L
Order ØH Lcode
PWA-L1444 11,0 43,0PWA-L1466 13,0 49,5PWA-L1488 13,5 55,0
Dimensions
• Low 0,1 bar operating pressure
• Full flow in one direction only
• Compact design
• Instant push-in connections
Line Mounted Non-return Valves
Push-in Flow Rate at Weight Order codeConnection Ømm 6 bar, l/s Kg
4 200 0,01 PWA-L1444
6 660 0,02 PWA-L1446
8 1600 0,02 PWA-L1448
Symbol
Sold in lots of 10
Operating informationOperating pressure: 0,2 to 10 barFlow: See belowOperating temperature: -15OC to +70OCStorage temperature -20OC to +70OCBody material: Thermo plastic
Pneumatic 2.27
Terminal Block Subbases for Cylinder Controls*
For Mounting Other Push-in Bore Weight Order codeCylinder Controls Connection Ømm Ømm Kg
G1/8 6 4 0,05 PZC-B2268
G1/4 8 6 0,05 PZC-B2289
* For remote mounting of all cylinder controls, when mounting on power valves orcylinders is impractical.The subbase is designed for mounting two components side by side.
Terminal Block Sub-bases PZC-B
• For the remote mounting of cylinder control accessories
• Suitable for use with - Flow regulators
- Blockers- Unloaders- Combined devices- Optimisers- Soft start
Operating informationOperating pressure: 0,2 to 10 barFlow: See belowOperating temperature: -15OC to +70OCStorage temperature -20OC to +70OCBody material: Thermo plastic
1319
== 31
= =
60
9 18,5
48
15,5
8,5 27
35,5
Dimensions
Test point
Pneumatic 2.28
Flexible TubingPneumatic
Pneumatic 3.2
Index
Thermoplastic Single Tubes and Pneumo-Tube Bundles
Page
Thermoplastic Single Tubes and Pneumo-Tube Bundles 3.3
Polyamide tubing 3.4 - 3.6
Polyurethane tubing 3.7 - 3.9
Accessories 3.10
Pneumatic 3.3
Thermoplastic Single Tubes and Pneumo-Tube Bundles
All Parker tubes are manufactured to Internationalstandards and are fully compatible with Parker'swide range of push-in, compression and screw typetube fittings, for example Parflex thermoplasticfittings such as Fast & Tite, True SealTM, Par-Bardand Mini-Barb as well as components from theParker Pneumatics Manual.
Standard packaging of all Parker single tubeproducts is polyethylene bags.
Dispensing cardboard boxes (K) are available onrequest.
Principle
Applications
Pneumatics Paint Systems
Lubrication Systems Automation Systems
Process Control Lines Medical Applications
Instrumentation and Control Food and Beverage Applications
Robotics Systems Fluid Applications
Pressurised Air Tools
Pneumatic 3.4
Parker calibrated nylon tubing is extruded in polyamide (PA11/12) for use with pneumatic fittings.This is manufactured within the limits of DIN 73378, BS 5409 PT1 and CETOP RP54 P recommendations, and isideal for pneumatic applications.For continuous use at high temperature we recommend tube which is protected against heat and light.
Parker calibrated nylon tubing
Nylon Tube
- Good vibration/damping properties, - High abrasion resistance- Tubing available in several colours for easy - Low pressure drop,
identification - No thermal expansion
Advantages
Working pressure (bar)
Technical Features
OC -40 -20 0 20 30 40 50 60 70 80 90 100
Tube size
3 x 0.60 27 27 27 27 23 20 18 16 14 13 12 11
4 x 0.65 21 21 21 21 18 15 14 12 11 10 9 8
4 x 1 39 39 39 39 32 28 25 22 20 18 17 11
5 x 1 29 29 29 29 24 21 19 17 15 14 13 10
6 x 1 24 24 24 24 20 17 15 13 12 11 10 8
8 x 1 17 17 17 17 14 12 11 10 9 8 8 6
10 x 1 13 13 13 13 11 10 9 8 7 6 6 5
10 x 1.25 18 18 18 18 15 13 11 10 9 8 8 6
10 x 1.5 22 22 22 22 18 16 14 13 11 10 10 8
12 x 1 11 11 11 11 9 8 7 6 6 5 5 4
14 x 1.5 15 15 15 15 12 11 10 9 9 7 7 5
16 x 1.5 13 13 13 13 11 9 8 7 7 6 6 5
Burst pressure (bar)
OC -40 -20 0 20 30 40 50 60 70 80 90 100
Tube size
3 x 0.60 81 81 81 81 69 60 54 48 42 39 36 33
4 x 0.65 64 64 64 64 53 46 41 37 33 30 28 23
4 x 1 116 116 116 116 96 83 74 66 60 51 51 42
5 x 1 87 87 87 87 72 63 56 50 45 41 38 31
6 x 1 71 71 71 71 59 51 45 40 37 33 31 25
8 x 1 52 52 52 52 43 37 33 29 27 24 23 19
10 x 1 40 40 40 40 33 29 26 23 21 19 18 15
10 x 1.25 53 53 53 53 44 38 34 30 27 25 23 19
12 x 1 33 33 33 33 27 24 21 19 17 16 15 12
14 x 1.5 45 45 45 46 37 32 29 26 23 21 20 16
16 x 1.5 39 39 39 39 32 28 25 22 20 18 17 14
Working pressure of nylon tubing is dependant on the operating temperature.
Working pressures shown are based on a design factor of 3:1
Pneumatic 3.5
Nylon Tube
To ensure the correct functioning of both tubefitting and pneumatic system it is important notto exceed the minimum bend radius of the tube.
Parker calibrated nylon tubing
Tube bend radius
Tube Minimumsize bend radius (mm)
3 x 0.60 154 x 0.65 204 x 1 205 x 1 356 x 1 358 x 1 4510 x 1.25 6010 x 1 6012 x 1 7014 x 1.50 8516 x 1.50 95
Tube outside diametertolerances
Tube ToleranceOD (mm)
3 to 5mm + 0.05-0.08
6 to 16mm +0.05-0.10
Chemical compatibility
Parker nylon tubing is suitable for use with a wide variety of fluids. The table below shows typical fluids used withnylon tubing.
Working temperature
-20OC +20OC +60OC
Cutting oil A A A
Cutting fluids A A AWater A A AHydraulic oils A A AMineral oils / greases A A ACarbon dioxide A A AAcetone A A AGasoline B B BTrichloroethylene - C C
Fluid
A = excellent, B = medium, C = poorFor other fluids please contact us
Pneumatic 3.6
Tube Outside Wall Colour Order code Order codeSize Ømm Thickness 25 m length 100 m length
3x1,7 3 0,6 Clear P6T-NW03060-025 P6T-NW03060-1003x1,7 3 0,6 Blue P6T-NB03060-025 P6T-NB03060-1003x1,7 3 0,6 Black P6T-NC03060-025 P6T-NC03060-1003x1,7 3 0,6 Yellow P6T-NY03060-025 P6T-NY03060-1003x1,7 3 0,6 Red P6T-NR03060-025 P6T-NR03060-1003x1,7 3 0,6 Green P6T-NG03060-025 P6T-NG03060-100
4x2 4 1,00 Clear P6T-NW04100-025 P6T-NW04100-1004x2 4 1,00 Blue P6T-NB04100-025 P6T-NB04100-1004x2 4 1,00 Black P6T-NC04100-025 P6T-NC04100-1004x2 4 1,00 Yellow P6T-NY04100-025 P6T-NY04100-1004x2 4 1,00 Red P6T-NR04100-025 P6T-NR04100-1004x2 4 1,00 Green P6T-NG04100-025 P6T-NG04100-100
4x2,7 4 0,65 Clear P6T-NW04065-025 P6T-NW04065-1004x2,7 4 0,65 Blue P6T-NB04065-025 P6T-NB04065-1004x2,7 4 0,65 Black P6T-NC04065-025 P6T-NC04065-1004x2,7 4 0,65 Yellow P6T-NY04065-025 P6T-NY04065-1004x2,7 4 0,65 Red P6T-NR04065-025 P6T-NR04065-1004x2,7 4 0,65 Green P6T-NG04065-025 P6T-NG04065-100
5x3 5 1,00 Blue P6T-NB05100-025 P6T-NB05100-100
6x4 6 1,00 Clear P6T-NW06100-025 P6T-NW06100-1006x4 6 1,00 Blue P6T-NB06100-025 P6T-NB06100-1006x4 6 1,00 Black P6T-NC06100-025 P6T-NC06100-1006x4 6 1,00 Yellow P6T-NY06100-025 P6T-NY06100-1006x4 6 1,00 Red P6T-NR06100-025 P6T-NR06100-1006x4 6 1,00 Green P6T-NG06100-025 P6T-NG06100-100
8x6 8 1,00 Clear P6T-NW08100-025 P6T-NW08100-1008x6 8 1,00 Blue P6T-NB08100-025 P6T-NB08100-1008x6 8 1,00 Black P6T-NC08100-025 P6T-NC08100-1008x6 8 1,00 Yellow P6T-NY08100-025 P6T-NY08100-1008x6 8 1,00 Red P6T-NR08100-025 P6T-NR08100-1008x6 8 1,00 Green P6T-NG08100-025 P6T-NG08100-100
10x8 10 1,00 Clear P6T-NW10100-025 P6T-NW10100-10010x8 10 1,00 Blue P6T-NB10100-025 P6T-NB10100-10010x8 10 1,00 Black P6T-NC10100-025 P6T-NC10100-10010x8 10 1,00 Yellow P6T-NY10100-025 P6T-NY10100-10010x8 10 1,00 Red P6T-NR10100-025 P6T-NR10100-10010x8 10 1,00 Green P6T-NG10100-025 P6T-NG10100-10010x8 10 1,00 Grey P6T-ND10100-025 P6T-ND10100-100
12x10 12 1,00 Clear P6T-NW12100-025 P6T-NW12100-10012x10 12 1,00 Blue P6T-NB12100-025 P6T-NB12100-10012x10 12 1,00 Black P6T-NC12100-025 P6T-NC12100-10012x10 12 1,00 Yellow P6T-NY12100-025 P6T-NY12100-10012x10 12 1,00 Red P6T-NR12100-025 P6T-NR12100-10012x10 12 1,00 Green P6T-NG12100-025 P6T-NG12100-100
14x11 14 1,50 Clear P6T-NW14150-025 P6T-NW14150-10014x11 14 1,50 Blue P6T-NB14150-025 P6T-NB14150-10014x11 14 1,50 Black P6T-NC14150-025 P6T-NC14150-100
Nylon tubes, 25m and 100m
Nylon Tube
Number of Tube Sheath Min bend Order codetubes Size colour radii 20° 100 m length
3 4x2,7 Black P6T-MC04N03-100 5 4x2,7 Black P6T-MC04N05-100 7 4x2,7 Black P6T-MC04N07-10012 4x2,7 Black P6T-MC04N12-10019 4x2,7 Black P6T-MC04N19-100
3 6x4 Black 40 P6T-MC06N03-100 5 6x4 Black 105 P6T-MC06N05-100 7 6x4 Black 115 P6T-MC06N07-10012 6x4 Black 150 P6T-MC06N12-10019 6x4 Black 160 P6T-MC06N19-100
Multitube - nylon tube - PVC sheath, 25m and 100m
Pneumatic 3.7
Polyurethane Tube
Parker calibrated polyurethane tubing is obtained by extrusion. The material hardness is 95 Shore A (slightly higherthan 40 Shore D).Its very high flexibility allows a small minimum bend radius for compact installations.A dimensional inspection system based on advanced laser technology maintains a tight tolerance on the outsidetube diameter.
Parker calibrated polyurethane tubing
- Extreme flexibility with bend radii up to three times - Good vibration resistance,better than polyamide tubing allows compact installations - Light weight,
- Tube available in several colours for line identification. - Reduced fitting time.
Advantages
Working pressure (bar)
Technical Features
OC -40 -20 0 20 30 40 50 60 70 80
Tube size
3 x 0.5 10 10 10 10 8 7 6 6 5 5
4 x 0.75 11 11 11 11 9 8 7 6 6 5
5 x 1 12 12 12 12 10 9 8 7 6 6
6 x 1 10 10 10 10 8 7 6 6 5 5
8 x 1.25 9 9 9 9 8 7 6 6 5 5
10 x 1.5 9 9 9 9 7 6 6 5 5 4
12 x 2 10 10 10 10 8 7 6 6 5 5
Working pressure of polyurethane tubing is dependant on the operating temperature.
Working pressures shown are based on a design factor of 3:1
Burst pressure (bar)
OC -40 -20 0 20 30 40 50 60 70 80
Tube size
3 x 0.5 30 30 30 30 24 22 19 17 15 14
4 x 0.75 33 33 33 33 27 24 21 19 17 15
5 x 1 37 37 37 37 30 26 23 21 19 17
6 x 1 30 30 30 30 24 21 19 17 15 14
8 x 1.25 28 28 28 28 23 20 18 16 14 13
10 x 1.5 26 26 26 26 22 19 17 15 14 12
12 x 2 30 30 30 30 25 22 19 17 16 14
Pneumatic 3.8
Polyurethane Tube
To ensure the correct functioning of both tubefitting and pneumatic system it is important notto exceed the minimum bend radius of the tube.
Parker calibrated polyurethane tubing
Tube bend radius
Tube Minimumsize bend radius (mm)
3 x 0.5 134 x 0.75 175 x 1 226 x 1 278 x 1.25 3710 x 1.50 5412 x 2 62
Polyurethane tubing outsidediameter tolerances
Tube ToleranceOD (mm)
3 to 8mm ±0.1
10 to 12mm ±0.15
Chemical compatibility
Parker polyurethane tubing is suitable for use with a wide variety of fluids. The table below shows typical fluidsused with polyurethane tubing.
Working temperature
-20OC +20OC +60OC
Cutting oil A A A
Cutting fluids A A AWater A A AHydraulic oils A A AMineral oils / greases A A ACarbon dioxide A A AGasoline B B BTrichloroethylene - C CAcetone - C C
Fluid
A = excellent, B = medium, C = poorFor other fluids please contact us
Pneumatic 3.9
Tube Outside Wall Colour Order code Order codeSize Ømm Thickness 25 m length 100 m length
3x2 3 0,5 Clear P6T-PW0305-025 P6T-PW0305-1003x2 3 0,5 Blue P6T-PB0305-025 P6T-PB0305-1003x2 3 0,5 Black P6T-PC0305-025 P6T-PC0305-100
4x2,5 4 0,75 Clear P6T-PW04075-025 P6T-PW04075-1004x2,5 4 0,75 Blue P6T-PB04075-025 P6T-PB04075-1004x2,5 4 0,75 Black P6T-PC04075-025 P6T-PC04075-100
6x4,0 6 1,00 Clear P6T-PW06100-025 P6T-PW06100-1006x4,0 6 1,00 Blue P6T-PB06100-025 P6T-PB06100-1006x4,0 6 1,00 Black P6T-PC06100-025 P6T-PC06100-100
8x5,5 8 1,25 Clear P6T-PW08125-025 P6T-PW08125-1008x5,5 8 1,25 Blue P6T-PB08125-025 P6T-PB08125-1008x5,5 8 1,25 Black P6T-PC08125-025 P6T-PC08125-100
10x7,0 10 1,50 Clear P6T-PW10150-025 P6T-PW10150-10010x7,0 10 1,50 Blue P6T-PB10150-025 P6T-PB10150-10010x7,0 10 1,50 Black P6T-PC10150-025 P6T-PC10150-100
12x8,0 12 2,00 Clear P6T-PW12200-025 P6T-PW12200-10012x8,0 12 2,00 Blue P6T-PB12200-025 P6T-PB12200-10012x8,0 12 2,00 Black P6T-PC12200-025 P6T-PC12200-100
14x9,5 14 2,25 Clear P6T-PW14225-025 P6T-PW14225-10014x9,5 14 2,25 Blue P6T-PB14225-025 P6T-PB14225-10014x9,5 14 2,25 Black P6T-PC14225-025 P6T-PC14225-100
Main data for Polyurethane tubes, 25m and 100m
Polyurethane Tube
Pneumatic 3.10
Weight Order codeKg
0,030 P6T-C
Tube cutter
Min Max length Colour Weight Order codebundle bundle m Kg
10 mm 40 mm 25 Grey 1,000 PZT-X0519 mm 100 mm 25 Grey 1,000 PZT-X20
Main data for Spiral conduit for tube bundles
Sold in rolls of 25m
Accessories
Exhaust SilencersPneumatic
Pneumatic 4.2
Exhaust silencers
P6M-PA... 9090... 9721... PZC P6M-MA 48021000Porous Sintered bronze Heavy duty Self Cleaning
polythene Male Female all metal
Adjustable restrictor
Exhaust silencing
Oil removal
Disposable
Renewable element
Cleanable
Modular
Optional manifold
No of connections 1 1 1 1 1 1
Push-in
Male ports
Female ports
Size
G1
G3/4
G1/2
G3/8 8 mm
G1/4 6 mm
G1/8 4 mm
M5
Refer to page 4.4 - 4.5 4.4 - 4.5 4.4 - 4.5 4.4 - 4.5 4.4 - 4.5 4.4 - 4.5
Exhaust silencers
Pneumatic 4.3
Exhaust silencers
0069301 9126 P6R-CB.. 351... ECS..Collectair Metal Plastic
body body
6+ 1+ 1
4.6 4.6 4.7 4.8 - 4.9 4.8 - 4.9
Restrictor silencers Reclassifier silencers
Pneumatic 4.4
Exhaust silencers
• All plastic ultra light weight versions
• Sintered metal
• All metal versions for heavy duty applications
• Versions with push-in connections
• High noise level reduction
• Low back pressure generation
Plastic Working temperature: -100C to +800CEfficiency 92%
Metal Working temperature: -100C to +740C Working pressure up to 17 bar
Operating and additional information
500 Plastic Series
Port Ø Weight Order codethread A B C g
M5 23 6,5 4 0,01 P6M-PAC5
G1/8 29 14 6 0,02 P6M-PAB1
G1/4 34 17 6 0,04 P6M-PAB2
G3/8 60 25 9 0,06 P6M-PAB3
G1/2 64 25 11 0,10 P6M-PAB4
G3/4 140 38 14 0,50 P6M-PAB5
G1 160 48 20 0,62 P6M-PAB6
Push-in Series
Symbol
Symbol Port Height on Weight Order codemm Push-in g
4 20,0 0,040 PZC-X14
6 35,5 0,025 PZC-S1006
8 34,0 0,030 PZC-S1008
BC
A
Pneumatic 4.5
Exhaust silencers
Port Ø Weight Order codeFemale A B C g
G3/8 83 37 - 0,124 P6M-MA13
G1/2 105 51 - 0,362 P6M-MA14
G3/4 143 73 - 0,670 P6M-MA16
G1 143 73 - 0.666 P6M-MA18
Heavy Duty Series
Sintered bronze Series
Port A/F Weight Order codethread A B C g
M5 23 6,5 4 0,003 9721 9000-05
G1/8 24 10 12 0,009 9090 0507-00
G1/4 32 11 16 0,019 9090 0508-00
G3/8 43 13 21 0,041 9090 0509-00
G1/2 60 16 24 0,068 9090 0510-00
G3/4 75 10 32 0,126 9090 0511-00
G1 77 12 37 0,188 9090 0515-00
Port Ø A/F Weight Order codemm A B C g
G1/8 15 8 13 0,060 9721 9004-04
Sintered Bronze Series (female)
Self Cleaning, 48 Series
Symbol
Symbol
Symbol
Symbol
A
B
C
A
B
C
Port Ø A/F Weight Order codethread A B C E g
G1/8 52 16 8 12 0,010 48021000
G1/4 53 22,5 10 17 0,018 48041000
G3/8 78 32 12,7 24 0,042 48061000
G1/2 78 32 14 24 0,042 48081000
G3/4 12 39 16 33 0,082 48121000
G1 120 39 20 33 0,082 48161000
A B
CA
B
ØFE hexagone
Pneumatic 4.6
Exhaust silencers
• Metal, stainless steel or plastic versions
• Screwdriver adjustment
• Simple control of cylinder speeds
• High noise level reduction
Sintered Metal Series
Port A/F Weight Order codethread A B C g
M5 16 11 7,6 0,04 33006
R1/8 33 25 13 0,16 43006*
R1/4 49 35 17,5 0,24 T53006
R3/8 68 52 27 0,56 T63006A
G1/2 64 45 27 0,60 B73006
* Sleeve type hand adjusted
Sintered Plastic Series
Port Ø Weight Order codethread A B C g
G1/8 23 16 7 0,002 9301 0509-01
G1/4 32 23 9 0,004 9301 0509-02
G3/8 40 30 10 0,010 9301 0509-03
G1/2 50 38 12 0,050 9301 0509-04
Sintered Stainless Steel Series
Port Ø Weight Order codethread A B C g
G1/8 33 25 13,0 0,040 9126 9001-95
G1/4 49 35 17,5 0,040 9126 9001-96
Restrictor - Silencers
Symbol
Symbol
C
A
B
A
B
C
Symbol
C
A
B
Pneumatic 4.7
Exhaust silencers
Reclassifier - Silencers
• Removes oil mist from exhaust airs
• Efficiently silences exhaust air
• Easily replaceable element
• Up to 6 exhaust lines
• Gauge messurement of element efficiency
• Modular design
Plastic Working temperature: -00C to +660CEfficiency >99%
Flow rate Max 30l/s
Operating and additional information
Collectair Series, complete units
Portthread A A1 B B1
G1/4 102 185 252 202
G3/8 102 185 252 202
G1/2 102 185 252 202
G3/4 102 185 252 202
Port Type of Weight Order codesize Reclassifier kg
None Collectair 1,076 P6R-CA00N
None Replacement filter cartidge 0,122 P6R-CK00E
Collectair Series, basic modules
Weight Order codeC C1 C2 kg
91 116 117 1,200 P6R-CB12B*
91 116 117 1,200 P6R-CB13B*
91 116 117 1,200 P6R-CB14B*
91 116 117 1,200 P6R-CB16B*
The Collectair enables the collection of all the exhaust lines in asystem to be routed through a filter element which efficientlyremoves solid particles and oil vapours. It also silences theexhausting air to approximately 25 dBa. A special gaugeshows the level of filter contamination by measuring the overpressure in the element.
Available with either G1/4 , G3/8, G1/2 or G3/4 modular portblocks, the top face of the unit also features 4 rubber grommetsfor push-in connection of Ø4 mm to Ø10 mm flexible tubing.
*Supplied complete with port blocks, wll mounting bracketand pressure guage to indicate condition
Supplied complete less port blocks, wall bracketsand pressure guage.
Note: To connect units in series order a complete unit plus one bodyconnector per additional unit.Body connector Part No P3E-KA00CBN
Symbol
Pneumatic 4.8
Exhaust silencers
Reclassifier - SilencersMetal Series, Repairable andDisposable versions
• Removes oil mist from exhaust airs
• Efficiently silences exhaust air
• Improves working conditions
Operating and additional information
Metal Repairable Series
Port A/F Weightthread Type A Ø B kg Order code
G1/2 Small 182 110 50 0,572 3514S
G3/4 Small 182 110 50 0,592 3516S
G3/4 Large 297 110 55 1,100 3516
G1 Large 297 110 55 1,100 3518
Metal repairable version
Working temperature 0 °C to 66 °C max.Working pressure Max 7 barEfficiency Better than 99%Maximum flow rate G1/2, G3/4 small unit 27,8 l/s
G3/4, G1 large unit 50 l/s
Disposable version
Working temperature 0° C to 52 °C max.Working pressure Max 7 barEfficiency Better than 99%Maximum flow rate See graph
Replacement Weight OrderElement kg code
Small 0,200 3514S-2
Large 0,200 3516-2
Symbol
Ø110
B
A
Pneumatic 4.9
Exhaust silencers
No Weight Order codeports kg
5 0,270 M3516-5
7 0,432 M3516-7
9 0,574 M3516-9
11 0,722 M3516-11
13 0,870 M3516-13
Wall mounting kit 0,040 3516-W
Manifold for Metal Repairable version
The manifole is available for G3/4 sizes only.For other sizes consult Technical Sales Dep't.
Port Weight Order codesize kg
G1/2 0,104 ECS B-2
G3/4 0,134 ECS B-4
Disposable version
Symbol