RETAIL

PLUMBING TRADE SUPPLIES RYE

MARCH 2015

Client Plumbing Trade SuppliesDistributor Alvin MorrisFlooring Contractor The Hull Flooring Co Ltd

www.itecfloors.co.uk

0800 032 3970

P L U M B I N G T R A D E S U P P L I E S

Customers of Plumbing Trade Supplies centres up and down the country are set to test the performance and aesthetic attributes of Itec Contract Floors safety flooring as it is rolled out across the busy chain of stores in a nationwide re-fit programme.

With constant footfall from trade visitors, any flooring used in a PTS store would have to withstand extreme wear, and

Itec Contract Floors was able to deliver the performance criteria stipulated in the brief; whether it is healthcare, education or in this case the retail sector, Itec’s ability to supply a good looking floor that will stand the test of time ensures

it remains top of the list for clients, specifiers and contractors alike. In this instance, isafe One from Itec’s safety flooring stable was identified thanks to its hardwearing durability and non-slip credentials.

isafe One is a high performance safety floor covering providing an R11 rating for slip resistance to protect areas at risk from water spillage. The talents of

isafe One go much further than this, with Hyperguard+ PUR low maintenance technology ensuring an easy wipe option for when slips and spills occur, something PTS also demanded from a floor to ensure customers could

shop in a hazard free environment. The centres have experienced isafe One in its Gainsboro Grey design, this Class 43 choice suitable for heavy industrial use yet blending with its surroundings in effortless fashion, proving that aesthetics have been considered just as carefully.

Sean Dawson of Hull Flooring, one of the companies tasked with the installations in question, explains, “These floors are ideal for sites such as PTS where safety flooring is a must to avoid staff and customers slipping”. The floors also required the minimum of hassle to install, again increasing their popularity; “isafe One was very simple to install, in many cases utilising the cold weld system. With this in mind, it’s safe to say we will be using Itec safety flooring again on future projects”.

Tel: 0800 0323 970www.itecfloors.co.uk

“The centres have experienced isafe One in its Gainsboro Grey design, this Class 43 choice suitable for heavy industrial use yet blending with its surroundings in effortless fashion”

The counter at Plumbing Trade Supplies, Rye

isafe One is performing up and down the country

Gainsboro Grey 594 provides for a safe surface