plates & coils - jindal steel & power ltd

12

Upload: jindal-steels

Post on 13-Apr-2017

68 views

Category:

Business


3 download

TRANSCRIPT

Page 1: Plates & Coils - Jindal Steel & Power Ltd
Page 2: Plates & Coils - Jindal Steel & Power Ltd

2

About Jindal Steel & Power Ltd Jindal Steel and Power Limited (JSPL) is one of India's primary & integrated steel producers with a significant presence in sectors like Mining, Power Generation and Infrastructure.

With an annual turnover of over US$ 3.5 billion, JSPL is a part of the US$ 18 billion diversified O. P. Jindal Group and is consistently tapping new opportunities by increasing production capacity, diversifying investments, and leveraging its core capabilities to venture into new businesses. The company has committed investments exceeding US$ 30 billion in the future and has several business initiatives running simultaneously across continents.

From the widest flat products to a whole range of long products, JSPL has a product portfolio that caters to the varied needs in the steel market. The company also has the distinction of producing the world's longest 121 meter rails and large size parallel flange beams for the first time in India.

JSPL operates the largest coal-based sponge iron plant in the world and has an installed capacity of 3 MTPA of crude steel at Raigarh, Chhattisgarh.

The company has an installed capacity of

Ÿ 0.8 MTPA Rail and Universal Beam Mill at Raigarh, Chhattisgarh

Ÿ 0.6 MTPA Wire Rod Mill and 1.0 MTPA TMT Rebar mill at Patratu, Jharkhand

Ÿ 0.6MTPA Medium and Light Structural Mill and 1.0 MTPA Plate Mill at Raigarh, Chhattisgarh and

Ÿ 1.5 MTPA Plate Mill producing up to 5 meter wide plates at Angul, Odisha

The company aims for a fast-paced growth so as to contribute substantially to India's long term prosperity.

An enterprising spirit and the ability to discern future trends have been the driving force behind the company's remarkable growth story. The company has scaled new heights with the combined force of innovation, adaptation of new technologies and the collective skills of its 15,000 strong, committed workforce.

3

Plate Mill in Angul, Odisha

Page 3: Plates & Coils - Jindal Steel & Power Ltd

5 Meter Ultra Wide Angul Plate Mill

The newly commissioned plate mill from Siemens VAI, at Angul, Odisha produces plates up to a width of 5 meter. It is equipped with latest equipments and technologies like TMCR, MULPIC cooling, On-line & Off-line normalizing, Quenching, Tempering, Shearing Units & On-line ultrasonic flaw detection system.

The Angul Plate Mill features the world class processes and ultra-modern facilities like:

• A state-of-the-art plate mill with total production capacity of 1.5MTPA with steel refining and rolling

processes as exclusive to this mill

• Hydraulic Automatic Gauge Control, Continuous Variable Crown, Anti Bending System, Plan View Rolling

& Online Gamma Thickness Gauge

• Electric Arc Furnace, Ladle Refining Furnace, Vacuum Degassing

• 300mm Vertical Caster with Soft reduction in Six segments followed by Pile cooling

• 4Hi Reversible Powerful Mill with 10,000 tonnes of roll separating force

• MULPIC (Accelerated cooling and Direct Quenching)

• 100% Full body and Edges, Online Ultrasonic testing

• Furnace Normalized, Austenitized, Quenched & Tempered, Thermo Mechanical Control Processed

• Widest dimensional range

4

JSPL adheres to stringent international standards and the steel grades are manufactured under various specifications like IS,

ASTM, EN, JIS, API etc. The Angul Plate Mill is fully equipped with inspection facilities right from the steel making stage to finished

plate stage.

It is also equipped with the walking beam type reheating furnace which ensures excellent surface quality and high pressure

de-scaler. The slabs in this furnace are re-heated to a temperature ranging from 1100-1250°C based on grades and then rolled in a

4 Hi-reversing Mill to produce plates with excellent surface quality.

The Angul mill is also equipped with Level 2 Automation; Thickness and Width controlling system coupled with Heavy duty

Leveller which assures close dimensional tolerances and an increased level of flatness control during plate production.

Our Plate Mill is capable of producing value added grades and products meeting all specialized and latest industry requirements.

Angul Plate Mill’s Major Offerings

CONTINUOUS CASTER SLAB FINISH PLATE

Thickness - 150 mm - 300 mm Thickness - 5 mm - 150 mm

Width - 1000 mm - 2300 mm Width - 900 mm - 5000 mm

Length - 2600 mm - 4800 mm Length - 3000 mm - 24000 mm

Weight - 4.6 - 30 MT (Max.) Weight - 30 MT (Max.)

5

Page 4: Plates & Coils - Jindal Steel & Power Ltd

• Scale Free Heat Treated Plates

• Online Direct Quenched Plates

• Ultrasonic Testing Machine online top down 102 probes

• Residual Stress Free Plates

• Customized Plates: Grades, Thickness, Width, Length

• Ultra Wide 5000mm Plates

• ½ ASTM Tolerances

• Metallurgical Process: DRI, EAF, LF, Vacuum Degassing, Vertical mould continuous Caster with Soft Reduction, Plate Rolling, Heat Treatment

• TMCP, MULPIC (ACC/DQ)

• Product and Strength Range: Thickness-5-150mm, Width- 900-5000mm Length- 3000-24000mm, YS-235-1800 Mpa

• Advanced OCTOPUS testing software

• 5 Meter Wide Plate Mill : M/s Siemens VAI UK• 280 MT/Hr. Reheating Furnace: M/s Fives Stein France• Roll Shop: M/s TENOVA Pomini Italy• Online Ultrasonic Testing M/c : M/s G E Inspection Technologies Germany• Detailed Engineering for Civil , Structural & Infrastructure by: M/s MECON India• Robotic Universal Testing M/c- M/s Zwick Roell, Germany • Impact Testing M/c & Hardness Testers: M/s Zwick Roell, Germany

• Phase I - 1.5 Million Tonnes per annum• Phase II - 2.0 Million Tonnes per annum• Width of Plate to be Rolled - 900mm to 5000mm • Maximum despatchable length - 24 Meters• Thickness of plate - 5 mm to 150mm

What makes our Angul Plate Mill Unique

Features

Technology Used

Capacity

6

Why JSPL Plates are Better than Others

From the raw material to the final product delivered to the customers, JSPL assures consistent quality at every step. Its strong quality assurance and control systems are equipped with state-of-the-art modern testing facilities and conform to stringent quality standards. Ultra clean steel owing to in-house iron ore, coal mines, better grain orientation and strength/ structural integrity for plates & sheets on account of cross rolling.

High end special steel grade plates such as High Strength Low Alloy (HSLA), Boiler & Pressure Vessel and API, are used in all structures, Boilers , Line Pipes, Automobiles, Ship Building, Wind Mills, Yellow Goods, Wagon Manufacturing, Defense & other Engineering applications.

Wide Dimensional Range

Plate Thickness from 5mm to 150mm, Width 900-5000mm & Length 3000-24000mm

Quality Assurance

Wide Application

Leading Technology Benefits

Compliance with Standards/ Customer Requirements

With Strict adherence to various national and International standards/ specifications like EN, DNV, BS, ASTM, API,JIS, LRS, ABS, IS etc; JSPL Plate Mill is capable of producing value added plate products to meet critical and the latest industry requirements.

• Automatic gauge control Accurate dimensions

• Work roll bending and Shifting equipment Increases profile and flatness control range

• Smart crown facility Better flatness

• Plan view rollingProper cross section and shape to ensure plate rectangularity

• Profile and flatness gauges Ensuring premium quality in plates

• Thermo-mechanical controlled rolling & MULPIC (Multi purpose interrupted cooling) process

For producing high-tensile steel plates with high and goodweldability for all major structural applications.

• Double side trim shear For trimming plates with tighter tolerances

• Slitting shear Center slitting

• Dividing shear sampling & cut to length Sampling & cut to length plates

• Heat treatment facility For normalizing, austenitising, quenching and tempering

• On-line Ultrasonic flaw detection system Automatic inspection and evaluation of the full body of the plates

7

Page 5: Plates & Coils - Jindal Steel & Power Ltd

*Offline Heat treatment Facilities available- Normalising, Quenching & Tempering

Process Flow

Slabs Yard

Hot Paint Marker

Walking Beam Reheating Furnace

High PressureDescaling

Cooling Bed 3(Thickness >50 mm)

Trolley Mounted

UT Machine

8

Inspection Bed(Plate Turnover Device)

Online Ultrasonic TestingCooling Bed 1

(Thickness<= 50 mm)

DRI Electric Arc Furnace

4 Hi Reversing Mill MULPIC Hot Leveller

Sampling & Testing

Packing & DispatchPaint Marking &

StampingGas Cutting

9

Double side trim shear

& Slitting ShearDivide shear

Paint Marking & Stamping

Packing & Dispatch

Ladle Refining Furnace Vaccum Degassing/RH Degassing

Slab Casting

Page 6: Plates & Coils - Jindal Steel & Power Ltd

Process Flow of Angul Plate Mill

The double row walking beam type digital furnace with a capacity of 280MT/hr is equipped with side burners having an independent on/off control for each burner, reducing the excess scale formation. The furnace is split into different control zones for uniform heat transfer through homogeneous heat & elimination of hot spots. The world's longest furnace 57 meter provided by Fives Stein further enhances soaking & improves the quality of heavy plates.

The 4 Hi reversible rolling mill along with cross rolling facilities has a roll separating force of 10,000 tonnes. This force helps in high shape factor rolling and thus reduces the internal discontinuities. The rolling mill is supported by high speed automatic gauge control, work roll anti bending and shifting equipment, smart crown facility, plan view rolling, profile & flatness gauges.

The thermo mechanical control process is a new generation rolling process for producing fine grain steel by rolling the steel plates in re-crystallization and non recrystallization region of austenite and for some applications in the dual phase region of austenite & ferrite and then using high rate (accelerated) cooling. Apart from the latest rolling, the mill also has Multi Purpose Interrupted Cooling (MULPIC) with features of Accelerated Cooling, Direct Quenching (DQ) & Quenching with Self Tempering (QST) facilities. A wide range of alloy design can be adapted for devising the rolling & cooling processes for achieving the desired properties. The combination of controlled rolling and accelerated cooling helps in producing high tensile steel plates with lower carbon equivalent with targeted properties, microstructures and excellent surface finish.

The hot leveller, with a capacity of 4,000 tonnes, provides excellent flatness and residual stress-free plates. Residual stress free plates are achieved by performing bending reversals, wherein, the plates are passed through a number of rolls separated by distance. The levelling force and the roll gap setting through hydraulic gauge control are calculated based on the strength, thickness, temperature etc. A plastification ratio of up to 80% can be offered depending on the tensile strength and thickness. The unit has automatic gauge control and shape system to ensure a high level of flatness. Residual stress free plates can be produced with most powerful leveller with a capacity of levelling heavy plates up to 100mm thickness.

Digital Reheating Furnace

Rolling Mill

Thermo-Mechanical Controlled Rolling and Accelerated Cooling

Hot Leveller

10

The online shearing units in the mill can shear plates of up to 50 mm thickness. The mill is equipped with heavy duty shear for plate shearing. With the help of double side trim shear, plates are supplied in trimmed and ready-to-use condition with tighter tolerance. Slitting shear on the other hand is used for central slitting where as dividing shear helps in sampling and final cut to length of plates.

The ultrasonic testing unit is on-line test equipment supplied by GE for automatic inspection and evaluation of the full body of the plates. The 102 probes ensure accurate examination of all flaws. As a result, on-line inspection of up to 50 mm covering 100% of the plate body and edges is done. Indications are recorded and evaluated to ensure precise monitoring of the internal quality of plates. The accuracy of this machine is such that a flat bottom hole of 2 mm diameter can be detected which supersedes any international standards so far in the Ultrasonic flaw detection. For thickness beyond 50mm, Ultrasonic testing shall be performed through trolley mounted multiprobe testing machine.

The mill is equipped with heat treatment facility with normalizing, austenising, quenching and tempering furnaces for achieving the desired texture of the steel plates. The plates are shot blasted before heat treatment and an inert atmosphere is maintained in the furnaces with indirect radiant type heating ensuring no scale formation on the surface of the plate.

Equipped with Hot paint marker, Cold paint marking & Stamper in impact unique and permanent identification. This ensures traceability right from the heat making stage to the finished product.

Shearing Units

Ultrasonic Testing

Heat Treatment

Marking and Traceability

11

Page 7: Plates & Coils - Jindal Steel & Power Ltd

The plate mill is a metallurgical tool that enables us to produce wide range of high quality plate products using different rolling techniques & heat treatment processes. Depending on the application, rolling techniques like As-Rolled, Normalized Rolled, Thermo-Mechanical Controlled process are adopted. These plates can further be processed in heat treatment (Normalizing and Quenching & Tempering) for improving the mechanical properties suiting the applications. Figure 1 shows the metallurgical principles followed for producing different range of plate products.

As rolled is a rolling procedure in which the final deformation is carried out in the austenitic region. General grades of steel plates are processed using this technique. With the advent of high powered mills, even the as rolled products offer good properties.

Normalized rolling is a rolling procedure in which the final deformation is carried out above the Ar3, i.e, in the austenitic region equivalent to the normalizing temperature range. Normalized Rolled plate products are used as a substitute for Furnace Normalized steel plates. The normalized rolled products offer similar properties that of furnace normalized plates with improved mechanical properties like ductility, impact toughness etc. The mechanical properties are further retained even after normalizing of these plates.

Thermo mechanical control process(TMCP) is a new generation rolling process for producing fine grain steel by rolling the steel plates in recrystallization and non-recrystallization region of austenite and for some applications in the dual phase region of austenite & ferrite and then using high rate (accelerated) cooling. A wide range of TMCP plates can be processed by controlling the rolling and the cooling strategies like air cooling & accelerated cooling. The steel slabs are first homogenized in the reheating furnace for dissolution of micro-alloys and to form a homogenized coarse austenite with a defined drop out temperature.

Figure 1 Rolling and Heat Treatment Process

Time

“asrolled”(“AR”) N Q&T+ +

“TM(CP)”

TM

TM

TM+ACC

TM+DQ,QST

TM

Tem

per

atu

re

Hot Rolling

MLE

Air

Ar₃

Ar₁

Water

ACC

Ac₃T

N

MS

(g) (g+a)

a + g

gnot rec

grec

a

ProcessA B C D E F G

The rolling is split into two phases, one in the recrystallized austenite and another in the non-recrystallized austenite. In between the two phases the intermediate plate stock is allowed to oscillate in the roller table prior to achieving the recrystallization stop temperature. The final deformation & rolling sequences are given in the non-recrystallized phase for achieving favorable properties. The thermo-mechanical rolling is followed with accelerated cooling or air cooling depending on the service property requirements. TMCP plate helps in achieving high strength, high toughness with lower carbon equivalent.

Quenching is a heat treatment process of heating the steel plates above Ar3 (Approx 910°C), soaking for a stipulated duration at a very high rate of cooling. The quenched steel plates are very hard, low on ductility & toughness. The steel plates are further heat treated in a furnace in a wide range of temperature viz. 150°C to 700°C to produce steel plates with desired properties. The tempering is done to improve the ductility, impact toughness and achieving desired hardness.

Furnace Normalizing is a heat treatment procedure adopted to improve the mechanical properties of rolled steel plates. The principle of furnace normalizing is heating the steel plates above Ar3 temperature (Approx 910°C), soaking at that temperature and then allowing it to cool in still air. This process helps in reducing the internal stresses, the microstructural banding, and further helps in refining the grains to produce fine grains and homogeneous microstructures. The normalized plates offer improved ductility, fine grained microstructures, and excellent impact toughness. The process is carried out in a closed roller hearth furnace with advanced temperature controls for thinner plates and in bogie-hearth furnace for thicker plates.

A combination of thermo-mechanical controlled rolling and a very high rate of cooling is known as direct quenching. Direct quenching is an online cooling technique (MULPIC) that helps in achieving very high cooling rates to substitute quenched and tempered steel plates.

Depending on critical applications, the unit also has advanced mathematical models for performing quenching as well as self tempering. The self tempering helps in improving ductility and impact toughness.

Figure 2 Thermo - Mechanical Control Process

Heating

g(coarse)

Tempering

TEM

PER

ATU

RE

Thermo-Mechanical Rolling

TIME

g(fine)formed

αg(fine)

recrystallised

Cooling on air

Accelerated cooling

Grain refinement

Final rolling

Metallurgy of Plate Rolling

As Rolled

Normalized Rolled

Thermo-Mechanical Control Process

Thermo-Mechanical Controlled Rolling with Direct Quenching & Self Tempering

Furnace Normalized

Quenching (Hardening) and Tempering

12 13

Page 8: Plates & Coils - Jindal Steel & Power Ltd

JSPL Heavy Plates are finding wide application across verticals due to its

ultra wide range and grades produced using state-of-the-art technology.

Applications

18

• High strength and toughness

• Good weldability

• Corrosion and fatigue resistance

• Tight dimensional tolerances

Ÿ IS 2062 E250 to E450

Ÿ EN 10025 S235 to S450

Ÿ ASTM A36, A283/285, A588

Ÿ With Strict adherence to various national and International standards/ specification like IS, EN, DNV, BS, ASTM, JIS, LRS, ABS etc, JSPL Plate Mill is capable to produce value added plate products to meet specialized and latest industrial requirements

Construction / General Engineering

JSPL manufactures plates for bridges, dams, civil structures and for industrial fabrication work

Mechanical Properties

Grades

Ÿ Plates Thickness: 5 mm - 150 mm

Ÿ Width : 900 mm - 5000 mm

Ÿ Length : 3000 mm - 24000 mm

Ÿ Max. weight: 30 MT per plate

*Dimensional Tolerances as per relevant standards / customized specification

Dimensions

Ÿ As rolled

Ÿ Normalised rolled

Ÿ Thermo mechanically controlled process

Ÿ Quenched and Tempered

Delivery Conditions

19

Page 9: Plates & Coils - Jindal Steel & Power Ltd

JSPL manufactures hot rolled plates and coils for the ship building industry which can endure adverse loading conditions, face corrosive environment and low temperature conditions to give the required mechanical properties of

• High strength

• Low temperature toughness

• High corrosion resistance

• Excellent fatigue properties

• Tight dimensional tolerances

• Excellent weldability with Low carbon equivalent

Ship Building

Ÿ Thickness: 5 mm - 90 mm

Ÿ Width: 900 mm - 5000 mm

Ÿ Length: 3000 mm - 24000 mm

Ÿ Max. Weight: 30 MT per plate

*Dimensional Tolerances as per relevant standards / customized specification

Ÿ As rolled

Ÿ Normalised rolled

Ÿ Thermo mechanically controlled rolled

Ÿ Furnace Normalised

Ÿ Quenched and Tempered

Ÿ Reference Standards: ASTM, IRS, ABS, DNV, GL, NKK, LR,BV etc.

Dimensions

Delivery Conditions

20

Wind Mill

JSPL manufactures plates for windmills subjected to

high wind speeds and buckling loads due to blades rotation

• High strength and toughness

• Good weldability, formability

• Corrosion and fatigue resistance

• Weld bead bend test on demand

• Through thickness properties.

• Tower

• Supporting structure for generator

Wind Mill

Mechanical Properties

Applications

Grades

EN 10025 S355 JR/JO/J2/K2, EN 10025 460 NL/ML, EN 10025 690 QL

Ÿ As rolled

Ÿ Normalised

Ÿ Thermo-mechanically controlled

Ÿ Quenched and Tempered

Ÿ Thickness: 5 mm - 80 mm

Ÿ Width: 900 mm - 5000 mm

Ÿ Length: 6000 mm - 24000 mm

Ÿ Weight: 30 MT per plate

*Dimensional Tolerances as per relevant standards

Dimensions

Delivery Conditions

21

Page 10: Plates & Coils - Jindal Steel & Power Ltd

14

JSPL manufactures hot rolled plates as per International standards especially API grade steel for making line pipes for transportation of oil, gas and for offshore applications.

Line Pipes and Offshore Platforms

• High strength and toughness• Low temperature toughness• Corrosion and fatigue resistance• Wear and abrasion resistance• Tight dimensional tolerances

Ÿ Offshore StructuresŸ Oil and Gas Line Pipes

Mechanical Properties

Ÿ Thermo mechanically controlled processŸ NormalisedŸ Quenched and TemperedŸ Through thickness test (Z - Test)Ÿ Drop weight tear test (DWTT) and CTOD testŸ Impact tested & Stringent UT as per requirements

Ÿ Thickness : 5 mm - 100 mmŸ Width : 1500 mm - 5000 mm Ÿ Length : 3000 mm - 24000 mmŸ Max. weight : 30 MT per plate

*Dimensional Tolerances as per relevant standards / customized Impact tested & Stringent UT as per requirements

Ÿ API 5L Grade B, API 5L X-42/X-46/X-52/X-56/X-60/X-65/X-70/X-80Ÿ EN10225 S355+N, EN10225S355+M, EN10225S3420+M, EN10225S460+MŸ API 2H-50Z, API 2W-50Z, API 2W-60

Applications

Grades

Dimensions

Delivery Conditions

22

JSPL assures its customers of superior quality plates. Rigorous quality assurance plan and state-of-the-art testing facility ensures compliance to all national and international specifications.

Our Laboratory and Testing Facilities are equipped with:

• Robotic Universal Testing Machine 1200kN

• HIC/NACE Testing Facilities

• Simulation Furnace

• Vicker and Rockwell Hardness Testing Machine

• Spectrometer

• Through Thickness Testing (Z-Test)

• Weld Bead Bend Test

Mechanical testing such as Tensile test, Impact test, Bend test, Hardness test, Chemical analysis, Microstructure examination / Grain Size determination are done in accordance with the standard specifications as per order. JSPL produces steel plates under proper metallurgical quality control and product in spection at each stage.

Automatic Impact T esting Machine 750J

1000kN Capacity Bend T esting Machine

Drop Weight T ear T esting (DWTT -100,000 J capacity)

Multi Probe UT Scanning Device

Metallurgical Microscope & Image A nalyser

Testings Lab

Inspection & Testing Facility

Page 11: Plates & Coils - Jindal Steel & Power Ltd

Plate-cum-Coil Mill at Raigarh

16

Our Plate- cum-Coil Mill at Raigarh (Chattisgarh) produces plates up to 3500mm wide and coils upto 2500 mm wide in various steel grades as per Indian and International standards. JSPL Plates & Coils are of premium quality in terms of dimensional adherence & internal soundness owing to its clean raw material, sound steel refining facilities and an efficient rolling mill. JSPL produces plates and coils complying to IS 2062 specifications upto E450 grades besides a wide range of international standards and steel grades as per EN, DIN, JIS, ASTM, API etc. The mill is approved by various certifying agencies such as LRS, DNV, ABS, GL, BV, IRS and NKK for shipbuilding steel; AD2000,PED, LR and IBR for boiler quality and CE marking for export. Beside these this mill is also accredited with : ISO 9001:2008, ISO 14001:2004 , OHSAS 18001and NABL certification for chemical and mechanical lab.

Product Dimensions

GradesFamily of grades produced

• Low strength plain carbon, standard structural and boiler steel

• High strength plain carbon, solution hardened steel

• Precipitation hardened HSLA steel

• Control-rolled “Line Pipe” grade steel

• Corrosion/Heat resistant steel

• Low alloy steel

• Cu bearing grades

Plate-cum-Coil Mill at Raigarh

HOT ROLLED COILS

Thickness: 5 mm-25 mm

Width: 1500 mm-2500 mm

Coil ID/OD: 700 mm/2000 mm

DISCRETE PLATES

Thickness: 5 mm - 120 mm

Width: 1500 mm - 3500 mm

Weight: 24 MT (Max.)

CUT TO LENGTH PLATES

Thickness: 5 mm-25 mm

Width: 1500 mm-2500 mm

Length: 6000 mm-12500 mm

Length: 3000 mm - 13500mm

FURNACE NORMALISED/ ONLINE NORMALISED PLATES

Thickness: 5 to 80 mm

Coil Weight: 25 MT (Max.)

17

Page 12: Plates & Coils - Jindal Steel & Power Ltd

Contact DetailsCertifications

ISO 18001 ISO 14001:2004ISO 9001:2008 ABS Certification

NKK CertificationGL CertificationDNV CertificationLR Certification

PGCIL Approval RDSO Approval CE Marking Well known steel maker

BIS BIS BV IRS

Kharsia Road,Raigarh - 496 001,Chhattisgarh, INDIATel: +91 7762 227001-05 Fax: +91 7762 227022-23 E-mail: [email protected]

Raigarh

PatratuBalkudra, Patratu,Distt. Ramgarh, Jharkhand - 829 143, INDIATel: +91 6553 275724/275726Fax: +91 6553 275744

BarbilIron Ore Pellet PlantCommercial Office,Plot No. 507/365,Barbil-Joda Highway,Barbil - 758035, Odisha, INDIATel: +91 6767 248621/248625Fax: +91 6767 248620

Raipur13 K. M. Stone,G.E. Road, Mandir Hasaud,Raipur - 492 101, Chhattisgarh, INDIATel: +91 771 2471205-07Fax: +91 771 2471214, 2471120E-mail: [email protected]

AngulJindal Steel & Power Ltd.Chhendipada Road, SH-63,At\Po : Jindal Nagar, Pin-759111Dist : Angul (ODISHA) Tel: +91 6761 254191-95 Fax: +91 6761 254141-144Email: [email protected]

Works

Registered OfficeO.P. Jindal MargHisar - 125 005,Haryana, INDIATel: +91 1662 222471-84Fax: +91 1662 220476

Corporate OfficeJindal Centre,12, Bhikaiji Cama Place,New Delhi - 110 066, INDIATel: +91 11 26188340-50Fax: +91 11 26161271

Marketing Offices

Bhubaneshwar

Chennai

Chandigarh

Jindal Steel & Power LimitedFlat No. 204/205, Plot No. 428/1869Basudev Enclave, Near Swaranapuri,Bhubaneswar - 751 029Tel: +91 674 2726500Fax: +91 674 2726889E-mail: [email protected]

Jindal Steel & Power LimitedA Block, 6B, 6th Floor,Meena-Kampala Arcade,Old No. 113 & 114, New No. 20 & 18,Sir Theyagaraya Road, T. Nagar, Chennai - 600 017Tel: 044 443446950-61, 24323530Fax: +91 44 42132334E-mail: [email protected]

Jindal Steel & Power LimitedSCO- 24, Sector 26,Madhya Marg, Chandigarh-160 019Mob: +91 8427822311Email: [email protected]

Hyderabad

Jaipur

Jamshedpur

Jindal Steel & Power LimitedSuite No. 102, 1st FloorCyber Heights, Banjara Hills,Road No. 2, Hyderabad - 500 034Tel: +91 40 40024878E-mail: [email protected]

Jindal Steel & Power Limited501 &504, Pashupati Akshat HeightsBani Park, Jaipur - 302 016Mob: +91 9694085333E-mail: [email protected]

Jindal Steel & Power LimitedFlat No. A1/1, Niroda Apartment,‘L’ Road, P.O. Bistupur,Jamshedpur - 831 002Mob: +91 9934010544E-mail: [email protected]

Kanpur

Kochi

Kolkata

Jindal Steel & Power LimitedSai Square (3rd Floor)45, Bhargava Estate,Civil Lines, Kanpur - 208 001Mob: +91 9971667034Email: [email protected]

Jindal Steel & Power Limited32/1577 - C2 (2nd Floor) Springs Cascade,Opp. Ernakulam Medical Centre,Bye Pass Road, Palarivattom,Kochi - 682 025Tel: +91 484 4019808Mob: +91 9567761233E-mail: [email protected]

Jindal Steel & Power LimitedRoom No. 61 & 63, 6th Floor,Circular Court, 8 A.J.C. Bose Road,Kolkata - 700 017,Tel: +91 33 - 40218100-20Fax: +91 33 - 40218116Mob: +91 9163878190E-mail: [email protected]

Mumbai

Raipur

Visakhapatnam

Jindal Enclave, 1st Floor, Behind Marathe Udyog BhawanNew Prabhadevi Road, PrabhadeviMumbai - 400 025 Tel: +91 22 66241000, 66241031Fax: +91 22 66241020e-mail: [email protected]

Jindal Steel & Power Limited13 K.M. StoneG.E. Road, Mandir HasaudRaipur - 492 101Chhattisgarh, INDIATel: +91 771 2471205-7Fax: +91 771 3054671/2471001E-mail: [email protected]

Jindal Steel & Power Ltd 2nd Floor, Pavan Commercial Complex,(Above Syndicate Bank)Main Road, Daba Gardens,Visakhapatnam-530020Andhra Pradesh

Head Office/International Sales Division

Ahmedabad

Bengaluru

Bhopal

Jindal Steel & Power LimitedPlot No-2, Sector-32,Near Exit-10, Gurgaon - 122 001,Haryana, INDIATel: +91 124 6612000 (Board)Fax: +91 124 6616202E-mail: [email protected]

Jindal Steel & Power Limited1208, MATRIX, Behind Divya Bhaskar Office,SG Road, Prahladnagar, Satellite,Ahmedabad - 380 051Tel: +91 79 65255502/3E-mail: [email protected]

Jindal Steel & Power LimitedN-306, IIIrd Floor, Manipal Centre,47, Dickenson Road, Bengaluru - 560 042Tel: +91 80 42127132E-mail: [email protected]

Jindal Steel & Power LimitedFM-5A, 1st Floor, Block - A,Mansarover Complex,Hoshangabad Road, Bhopal - 462 011Tel: +91 755 4061630E-mail: [email protected]

Stockyards

MUMBAIJINDAL STEEL AND POWER LTD.C/o DAMANI SHIPPING PVT LTD.PLOT NO 147/2, 140/2, 147,3OPP ASIS LOGISTICS, USATNE AMBERNATH,TALOJA BY PASS ROADTHANE 421502.

RaipurM/s Shri Kirshna LogisticsTransport Nagar, Patrapali,Distt. Raipur Chattisgarh - 496 001Mob: +91 9907185595E-mail: [email protected]

NagpurM/s Rita Steel253/K-2 16 K.M. Milestone, Bhandara Road, MahalgaonTehsil Kamptee, Distt. NagpurMaharastra - 441 202Mob: +91 9923824063E-mail: [email protected]

PatnaM/s Shri Tejasawi YadavMarch Marchi Road,Patna (Bihar)Mob: +91 9771424228E-mail: [email protected]

CuttackM/s Baba Lingaraj EnterprisesAt Govindpur Chak PO: Baichuna,Tangi, Cuttack - 754 022Mob: +91 9777444936E-mail: [email protected]

DelhiM/s LMJ Logistics LtdKhsra No. 42/29, Bakoli,GT Karnal Road, New Delhi- 110009Mob: +91 9873973209E-mail: [email protected]

FaridabadM/s Sumer Sons Pvt LtdVillage Bhakri, Batkal-Pali RoadFaridabad - 121 009Mob: +91 9999700550E-mail: [email protected]

GhaziabadM/s Daya Steel Jindal Polyflex JV Pvt LtdA-3, Udyog Kunj, UPSIDC Industrial Area27 KM Stone, Hapur Bypass, NH 24 Ghaziabad - 201 001Mob: +91 9997307666E-mail: [email protected]

M/s Chachan Metals Pvt. LimitedKhasra No.387-389 & 39 -394Reliance Road, Gram: Bhavapur, Jindal Nagar, Ghaziabad - 201 302

GUWAHATIJINDAL STEEL AND POWER LTD.DAG no. 35,PATTA no. 102,Old 1474, New situated at Satgaon,Mauza Deltola,Kmrup Metro,Assam-781171

M/s Sumer Sons Pvt LtdC-11, Jhotwara Industrial Area,Jaipur - 302 012,Mob: +91 9166910666E-mail: [email protected]

KanpurM/s Shree Gopal Industries873 A, Kalpi RoadGram Umran, Rania, Kanpur - 209 311Mob: +91 9971667034E-mail: [email protected]

KolkataM/s Balmer Lawrie & Co. Ltd.1, Sonapur Road,Near Jainkund Petrol PumpKolkata - 700 088Mob: +91 9007148468E-mail: [email protected]

LudhianaM/s Sumer Sons Pvt LtdVillage Rajgarh, Tehsil Payal,Near Doraha, Ludhiana - 141 421Mob: +91 8427629955E-mail: [email protected]

MumbaiM/s Jyoti Logistics Pvt ltdSurvey No. 72, NH-4Old Mumbai-Pune HighwayKhalapur,Distt. Raigad - 410 203Mob: +91 9820811555E-mail: [email protected]

JaipurM/s Continental Carriers of IndiaGate No 44, Near Rahuri Railway Station,Tandulwadi, Post-Rahuri,Ahmednagar, Maharashtra - 413 705,Mob: +91 9923001951E-mail: [email protected]

RudrapurKhasra No. 642, On NH 74,10 Mile Stone, Rudrapur, Kashipur Road,Near IBP Petrol Pump, Vill. dhaulpur, Post,Khanpur, Udhamsingh Nagar, UttrakhandMob: +91 9557064666E-mail: [email protected]

VishakapatnamM/s. Maha Maruti Logistcs (P) Ltd.SYNO. 27/5, Seshadri Nagar,Chamalapalli Village Vepagunta,Vishakapatam - 530 047Mob: +91 8008655007E-mail: [email protected]

RahuriAhmedabadM/s Raghav Steel156/157, Mouje Eyava, Near Hipolin Ltd.,Sanand Viramgam HighwaySanand, Ahmedabad - 382 110, INDIA Mob: +91 9909964648E-mail: [email protected]

BANGALOREJINDAL STEEL AND POWER LTD.No.97/98, Goravigere Gate,Bidarhalli, Hobili, Hoskote-Whitefield Road,Post - Kannamangala,Bangalore -560067M -+91-9036662106

BhopalM/s Sanjay ShuklaSurvey No. 234, 235, Gram Sukhi, Sevania,Vidisha Road, Bhopal - 462 010Mob: +91 9827478327E-mail: [email protected]

ChandigarhM/s VTC Transport Pvt Ltd131 Industrial Area, Phase 1Chandigarh - 160 101Mob: +91 9814492033E-mail: [email protected]

ChennaiM/s Sri Balaji Steel AgenciesPlot No.4, Survey No. 110/2Kadappakkam Village, Near Manali New Town,Vichoor Road, ManaliChennai - 600 103, Mob: +91 9840237966 E-mail: [email protected]

KEY LOCATIONS & SALES NETWORK

DumkaIndra Palace, Nag Path,Shiv Pahar, Dumka - 814 101,Jharkhand, INDIA Tel: +91 6434 231045Fax: +91 6434 231044