www.incledon.co.za

DPI TradingDPI Trading

www.dpitrading.co.za

PROUDLY IMPORTED BY

PLASTICA ALFA

Compression

Fittings

&

Pipe Saddles

For use

with

Polyethylene

Pipe

PRODUCT CATALOGUE

SANS 14236 & 1808-44

Technical Information

Assembly Instructions

PLASTICA ALFA

Compression Fittings

PN 16 for fittings from Ø 16 mm to 110mm SANS 14236 (ISO 14236)PN 10 for fittings with 3" and 4" female threads.

Body: black polypropylene (PP)Nut: blue polypropylene (PP)O-ring: nitrile rubber 70 Shore (NBR)Cliching ring: acetal resin 9(POM)Reinforcing ring: stainless steel “AISI 430"

(Maximum working pressure at the temperature of 20ºC.)

Special pieces suitable for the conveyance of drinking water, wine,drinks and alimentary fluids according to the applicable regulations in Italy and other countries.

The BLACK LINE compression fittings are in conformity with the standard UNI 9561, uni 9562, uni en 712-713-715, uni iso 7/1 and ISO 14236, AND SANS 14236

SANS 14236 & 1808-44

1

Coupling

Reducing Coupling

PLASTICA ALFA

Male Adaptor

16x½”

16x¾”

20x½”

20x¾”

25x½”

25x¾”

32x¾”

32x1¼”

40x1¼”

40x1½”

50x1½”

63x1½”

63x2½”

75x2½”

75x2"

75x3"

90x2"

90x3"

90x4"

110x3"

110x4"

Product Catalogue

* Dimensions all in mm

SANS 14236 & 1808-44

400600400601400602400603400604400605400606400607400608400605

Code

400630

400635

400640

400641

400646

400652

400655

400656

400657

400660

400661

400662

400665

400666

400670

400671

400636

Code

Code

400100

400101

400106

400107

400112

400113

400114

400121

400122

400123

400127

400128

400129

400136

400138

400148

400144

400146

400154

400156

400158

400162

400165

400168

400177

400180

* Also available in 50 x 32mm

* Also available in 50 x 1¼” 65 x 1¼

2

Female Adaptor

16x½”

16x¾”

20x½”

20x¾”

25x½”

25x¾”

32x¾”

40x1¼”

40x1½”

50x1¼”

50x1½”

75x2½”

PLASTICA ALFA

End Cap

90º Elbow

Product Catalogue

* Dimensions all in mm

SANS 14236 & 1808-44

400000

400001

400006

400007

400012

400013

400014

400021

400022

400027

400028

400029

400035

400036

400038

400046

400054

400056

400065

400077

400080

Code

Code

Code

401400

401401

401402

401403

401404

401405

401406

401407

401408

401409

401000

401001

401002

401003

401004

401005

401006

401007

401008

401009

** Reduced pressure PN 10

* Also available in 90 x 4"

3

*

*

90º Male Threaded Elbow

PLASTICA ALFA

16x½”

16x¾”

20x½”

20x¾”

25x¾”

32x¾”

40x1¼”

50x1½”

75x2½”

90º Female Threaded Elbow

Product Catalogue

* Dimensions all in mm

32x1¼”

32x¾”

25x¾”

25x½”

20x¾”

20x½”

16x½”

40x1¼”

40x1½”

50x1¼”

50x1½”

63x1½”

63x2½”

75x2½”

SANS 14236 & 1808-44

401200

401205

401206

401210

401211

401212

401216

401217

401218

401225

401226

401227

401235

401236

401238

401245

401247

401250

401255

401257

401259

401265

401269

401280

Code

Code

401030

401031

401035

401036

401041

401042

401046

401047

401055

401056

401066

401077

401085

401087

401095

401105

401110

* Reduced pressure PN 10

* Also available in 25 x ½” 50 x 2" 63 x 1½”

*

4

*

*

45º Elbow

45º Male Threaded Elbow

45º Female Threaded Elbow

PLASTICA ALFAProduct Catalogue

* Dimensions all in mm

SANS 14236 & 1808-44

Code

Code

Code

400900

400901

400800

400850

400851

5

90º Tee

90º Reducing Tee

PLASTICA ALFA

16x½”

16x¾”

20x½”

20x¾”

25x½”

25x¾”

32x¾”

40x1¼”

40x1½”

50x1½”

75x2½”

63x2½”

75x3"

90x4"

90º Male Threaded Tee

Product Catalogue

* Dimensions all in mm

SANS 14236 & 1808-44

401900

401901

401902

401903

401904

401905

401906

401907

401908

401909

Code

402255

402260

402265

402270

402271

402275

402280

402285

402290

Code

Code

402100

402105

402106

402111

402112

402116

402117

402135

402136

402137

402146

402148

402157

402156

402165

402167

402169

402175

402180

402185

402190

****

** Available on request

**

**

** Available on request

6

90º Female Threaded Tee

PLASTICA ALFA

Nut

Product Catalogue

* Dimensions all in mm

16x½”

16x¾”

20x½”

20x¾”

25x¾”

32x¾”

40x1½”

50x1½”

63x2½”

75x2½”

40x1¼”

SANS 14236 & 1808-44

Code

Code

401929

401930

401931

401936

401937

401941

401942

401950

401951

401952

401961

401973

401985

401987

401989

401995

402010

402020

401975

**

** Available on request* Reduced pressure PN10

*

*Also available25 x ½”50 x 1¼”90 x 4"

7

*

*

D

L

L1H

d d1 F

Flange Adaptor

Code D L L1 H d d1 F

400300 50 x 1½” 91 163 114 17.5 58.5 89.5 152

400302 50 x 2" 99 163 114 17.5 77.0 103.0 165

400310 63 x 2" 99 183 95 17.5 77.0 103.0 165

400320 75 x 2" x ½” 118 185 113 17.5 88.0 122.0 185

400321 90 x 3" 144 197 141 20.0 108.0 138.0 200

400330 90 x 4" 169 177 141 24.0 131.0 158.0 220

440430 110 x 4" 169 225 167 24.0 131.0 158.0 220

Thrust Ring

O’Ring

Clinching Ring

PLASTICA ALFAProduct Catalogue

* Dimensions all in mm

SANS 14236 & 1808-44

8

Technical Information

1. After locating the site, prepare theclamp saddle, the bolts and the o’ring

2. Position the saddle lower part on the pipe

3. After inserting the o’ring in its proper seat, position the saddle upper part and start screwing the bolts.

4. Screw the bolts with a key to make the saddle adhere to the pipe.

5. Drill the pipe perpendicularly. The threaded part is ready to be connected.

Assembly Instructions

Clamp Saddles

PLASTICA ALFA

10 BAR without reinforcing ring ø 20÷ ø 315mm16 BAR with reinforcing ring : ø 20 ÷ ø 6312.5 BAR with reinforcing ring ø 75 ÷ ø 315(maximum working pressure at the temperature of 20ºC)

CLAMP SADDLEBody: black polypropyleneGaskets: nitrile rubber 70 Shore (NBR)Bolts: galvanized steelReinforcing ring: stainless steel “AISI 430"

POLYPROPYLENE 100ºC

Special qualified pieces to the conveyance of drinking water and alimentary fluids.

The Clamp saddles are in conformity with the standard UNI EN ISO 13460 e UNI EN 10226/1, ANSI/ASME B1.20.1For PE pipes in conformity with the standard UNI 7990, INI EN 12201 - 2 - UNI EN ISO 15494/ SANS 1808-44

SANS 14236 & 1808-44

9

Clamp Saddle for PE and PVC Pipes

25 x ½”25 x ¾”32 x ½”32 x ¾”32 x 1"40 x ½”40 x ¾”40 x 1"50 x ½”50 x ¾”50 x 1"50 x 1¼”63 x ½”63 x ¾”60 x 1"63 x 1¼”63 x 1½”75 x ½”75 x ¾”75 x 1"75 x 1¼”75 x 1½”75 x 2"90 x ½”90 x ¾”90 x 1"90 x 1¼”90 x 1½”90 x 2"110 x ½”110 x ¾”110 x 1"110 x 1¼”110 x 1½”110 x 2"110 x 2½”110 x 3"125 x ¾”125 x 1"125 x 1¼”125 x 1½”125 x 2"125 x 2½”140 x 1"140 x 1¼”140 x 1½”140 x 2"140 x 3"160 x ½”160 x ¾”160 x 1"160 x 1¼”160 x 1½”160 x 2"160 x 3"160 x 4"200 x ¾”200 x 1"200 x 1¼”200 x 1½”200 x 2"200 x 3"200 x 4"225 x ½”225 x ¾”225 x 1"225 x 1¼”225 x 1½”225 x 2"225 x 3"225 x 4"250 x 1"250 x 1¼”250 x 1½”250 x 2"250 x 3"250 x 4"315 x 1"315 x 1¼”315 x 1½”315 x 2"315 x 3"315 x 4"

without reinforcing ring

with reinforcing ring

PLASTICA ALFAProduct Catalogue

No.Bolts

Sizeof Bolts

O-RingSize

WeightMass

Grams

* Dimensions all in mm

A

B

SANS 14236 & 1808-44

Code

117598117716117600117601117602117717117605117606117174117175117176117192117179117180117181117620117619117400117182117183117622117621117193117177117184117185117623117625117624117188117186117187117190117189117191117718117603117401117402117403117404117405

117406117407

117719

117408117409117720

117195117410117411117194117616117721

117197117300117412117198117617117618

117722117723117724117725117726117727117199117728117413117196117729117730117731117732117733117734117735117736

117122116116117123124123130135140139248250260252250287297301305307301347339348340342365443450449458454475480480463449475475470475817814814877866865865865875887875908969

206520652030213520352073208021602160216027122164219722282220271227122712271327502765400540104020405040654125

117245117615

117268117269

117261

10

PLASTICA ALFASANS 14236 & 1808-44

DISCLAIMERWhilst every care was taken in compiling this data, information and related material contained herein are subject to change without notification. All detail that this document contains are provided in good faith and therefore no representation or warranty whatsoever regarding the completeness, accuracy, “up to date”, or adequacy of, suitability, functionality, ommission, or operation is specifically disclaimed of any liability for direct, indirect or consequential loss or damage, however so arising, from the use or reliance on information herein thereafter provided.

INCLEDONGERMISTON Tel: 011 323 0800

KLERKSDORP Tel: 018 462 0009

BLOEMFONTEIN Tel: 051 408 9200 KATHU Tel: 053 723 2213

NELSPRUIT Tel: 013 752 3121

SECUNDA Tel: 017 631 4200

EAST LONDON Tel: 043 736 6022 PORT ELIZABETH Tel: 041 409 8000DURBAN Tel: 031 716 2200

POLOKWANE Tel: 015 292 8660LEPHALALE Tel: 014 763 5824

BURGERSFORT Tel: 013 231 7224

DPI TRADING (Western Cape)CAPE TOWN Tel: 021 957 5600 GEORGE Tel: 044 874 2327

WELKOM Tel: 057 396 1131RUSTENBURG Tel: 014 591 7700 UPINGTON Tel: 054 332 1089