plant closed global fabrication,...

WELL MAINTAINED LATE MODEL FABRICATING AND WELDING EQUIPMENTINCLUDING TRUMPF CNC PRESS BRAKE, PLASMA TABLE, PLATE AND ANGLE ROLLS,

CNC MACHINERY, WELDERS AND SUPPORT EQUIPMENT

WELL MAINTAINED LATE MODEL FABRICATING AND WELDING EQUIPMENTINCLUDING TRUMPF CNC PRESS BRAKE, PLASMA TABLE, PLATE AND ANGLE ROLLS,

CNC MACHINERY, WELDERS AND SUPPORT EQUIPMENTSee Instructions on Page 3

To Become a Qualified Bidder on the Internet

SALE DATE: WEDNESDAY, JANUARY 25TH, STARTING AT 9:00 AMSALE DATE: WEDNESDAY, JANUARY 25TH, STARTING AT 9:00 AMINSPECTION: TUESDAY, JANUARY 24TH, FROM 10:00 AM TO 4:00 PM

GLOBAL FABRICATION, INC.GLOBAL FABRICATION, INC.235 Beaver Drive – Dubois, Pennsylvania 15801

100 Miles Northeast of Pittsburgh, PA

Plant Closed

Wheelabrator Model A3-4482 Four-Head Roller Conveyor Pass-Thru Structural Steel ShotBlast Machine

(25) Late Model Miller Lincoln Mig & Tig Welders

220 Ton x 12’ Trumpf Model Trumabend V200 Multi-Axis CNC Press Brake

Gildemeister Model CTX-420 Linear CNC Turning Centerwith Live Tooling, C and Y Axis

10’ x 5/16” Roundo Model PS-205 Hydraulic Plate BendingRoll

NEW2004

NEW2003

NEW2003

NEW2004

NEW2000’s

CINCINNATIINDUSTRIALAUCTIONEERS

auctioneers | appraisers | since 1961

Sale Under The Management Of

Cincinnati Industrial Auctioneers2020 Dunlap St., Cincinnati, Ohio 45214Phone 513-241-9701 Fax 513-241-6760cia-auction.com | [email protected]

In Conjunction With

HGR Industrial Surplus20001 Euclid Ave., Cleveland, Ohio 44117Phone 216-486-4567 Fax 216-486-4779hgrinc.com | [email protected]

1748208G CIA-HGR Global Fabrication-4 1/4/17 9:17 AM

WEDNESDAY, JANUARY 25TH – 9:00 AMWEDNESDAY, JANUARY 25TH – 9:00 AM

STRUCTURAL BLASTLINEWheelabrator Model A3-4482 Four-Head RollerConveyor Pass-ThruStructural Steel Shot BlastMachine; s/n 6006, 36” High x24” Wide Opening, 20’ OverallTunnel Length, 15 HP BlastHeads, Reclaim System (New12/2004) SEE PHOTO

CNC PRESS BRAKE220 Ton x 12’ Trumpf ModelTrumabend V200 Multi-AxisCNC Press Brake; s/nB0106A0076, Three-Axis BackGauge, 160” Overall Bed Length,144” Max. Bet. Housings, TrumpfDA-69TW Control, Merlin LightCurtains (New 6/2004)

SEE PHOTOVarious Trumpf SegmentedPrecision Press Brake Dies

CNC PLASMABURNING TABLEMesser Model Titan 10/4LPHi-Definition CNC PlasmaCutting Table; s/nTITAN10/4LP-04-42, P.O. No.150178, Messer Touch ScreenCNC Control, 23’ Long x 11’Downdraft Cutting Table,Hypertherm Model HD4070Plasma Power Supply (New2004) SEE PHOTO

• Shop Built 1-CartridgeDust Collector

PLATE BENDINGROLL10’ x 5/16” Roundo ModelPS-205 Hydraulic PlateBending Roll; s/n 037084(New 2003) SEE PHOTO

PLATE SHEAR10’ x 1/2” Bystronic ModelMK13-3 Hydraulic PowerSquaring Shear; s/nMK/08/022/TE, 13-MM Cap.,Power Back Gauge (New 2003)

SEE PHOTO

IRONWORKER6-1/2” x 6-1/2” x 1/2” GekaModel HYD-110 HydraulicIronworker; s/n 19558, 24” x5/8” Flat Cap., 2” Bar Cap., FootPedal (New 2003)

SEE PHOTO

ANGLE BENDINGROLL3” x 3” x 5/16” AK BendModel APK-81 HydraulicHorizontal Angle, Flat andTube Bending Roll; s/n 81216,Pendant, Dies (New 2007)

SEE PHOTO

SAWS18” x 20” Marvel Model 81ATilt Frame AutomaticVertical Band Saw; s/n E-393219-PCM, 24” Hydraulic BarFeed, Clamping SEE PHOTO

14” Dake Model 550STCold Saw (New 2004)

12” Dake Model SXC-11Vertical Band Saw

WELDERS ANDWELDING TABLES(2) 600 Amp Lincoln ModelDC-600 Welders(4) 450 Amp Miller Pipe Pro450RFC Welders w/ ModelPipe Pro 12RC SuitcaseWire Feeds SEE PHOTO

(2) 450 Amp LincolnPowerwave 455M Weldersw/ Model 10M Wire Feed,Cooler and Leads SEE PHOTO375 Amp Lincoln ModelAspect 375 Tig Welder w/Leads and Cool Arc 75Cooler(8) 350 Amp Miller Invision354 Mig Welders w/ Suitcase12RC Wire Feeds(3) 350 Amp LincolnPowerwave S350 Welders w/Model 10M Wire Feed, Coolerand Leads(2) 350 Amp LincolnInvertec V350 Mig Weldersw/ LF-72 Wire Feeds(3) 300 Amp MillerTigrunner Dynasty 300 TigWelders w/ Leads, Coolers andFoot Pedals SEE PHOTO(2) 300 Amp MillerDeltaweld 300 Mig Weldersw/ Wire Feed(3) Hypertherm Powermax1000 Plasma Cutters(3) 5’ x 8’ Acorn Style CastIron Welding Tables w/Stands SEE PHOTOLincoln LN-9 Squirt WelderSub Arc Wire Feed96” Long x 48” Wide BlucoDemmeler and AcornWelding Fit-Up Table w/Fixturing SEE PHOTO

WELDINGPOSITIONERS,MANIPULATOR ANDTANK ROLLS12’ x 8’ Pandjiris Model 61-M Welding Manipulator w/

Subarc DC-1000 PowerSupply SEE PHOTO

7,500 Lb. Pandjiris Model75MVRMT Tilting andRotating Welding Positioner;s/n W358, 56” Dia. Table

SEE PHOTO

3,000 Lb. Irco Model 3KTilting and RotatingWelding Positioner; s/n30147, 36” x 36” Table, 18”Chuck SEE PHOTO

800 Lb. All-Fab Model 804Tilting and RotatingWelding Positioner; s/n100705298, 20” Dia. Table, 12”Dia. Chuck

500 Lb. All-Fab Model 504Tilting and RotatingWelding Positioner; s/n100705299, 20” Dia. Table, 12”Dia. Chuck

60 Ton IRCO Model 60TONMotorized Tank TurningRoll Set w/ Idler; s/n 31346

SEE PHOTO

(2) Approx. 20 Ton IdlerRolls(4) Approx. 2,000 Lb.Motorized Tank Rolls (8) Manual Idler Rolls

PIPE FABRICATING Bug-O Model SEC-1590-ESaddle and Elbow PlasmaPipe Beveling Machine; s/nC010604, 16” Chuck, Pendant

SEE PHOTO

• Thermal DynamicsCutmaster 10 PlasmaPower Supply

12’ x 8’ Pandjiris Model 61-MWelding Manipulator w/Subarc DC-1000 Power Supply

3,000 Lb. Irco Model 3K Tilting andRotating Welding Positioner

JLG Model 2630ES Self TravelingElectric Scissor Lift Platform

4,000 Lb. Anver Model L400M8-190-4/44Vacuum Sheet Lifter

Large Quantity Lifting Equipment

(2) Torcup Model 7750008 and EP4000Hydraulic Torque Wrenches

10’ x 1/2” Bystronic Model MK13-3Hydraulic Power Squaring Shear

6-1/2” x 6-1/2” x 1/2” Geka Model HYD-110Hydraulic Ironworker

18” x 20” Marvel Model 81A Tilt FrameAutomatic Vertical Band Saw

3” x 3” x 5/16” AK Bend Model APK-81 HydraulicHorizontal Angle, Flat and Tube Bending Roll

Messer Model Titan 10/4LP Hi-Definition CNC Plasma CuttingTable

NEW2004

NEW2007

NEW2003

NEW2008

NEW2003


GLOBAL FABRICATION, INC.GLOBAL FABRICATION, INC.

HYDRAULIC TORQUEWRENCHES ANDGAUGES(2) Torcup Model 7750008and EP4000 HydraulicTorque Wrenches; s/nD1015Y3 and E1220F1

SEE PHOTO

(2) Hydraulic Test Standsw/ Gauges

CNC HORIZONTALMILLFryer Model HR-60 Three-Axis CNC Bed TypeHorizontal Milling Machine;s/n 60815, Anilam 6000 TouchCNC Control, 72” x 24” Table,60” X-Axis, 28” Y-Axis, 30” Z-Axis SEE PHOTO

CNC TURNINGCENTERGildemeister Model CTX-420 Linear CNC TurningCenter with Live Tooling, Cand Y Axis; s/n 7011310,Heidenhain Control, 10” Chuck,26” Max. Swing, 22” Swing OverCross Slide, 23” Max. TurnLength, 12-Station Turret, Y-Axis,Chip Conveyor (New 2003)

SEE PHOTO

MISC. MACHINERYRidgid Model 1224 PipeThreader

Hotsy Model 1075SSESteam CleanerGraco Model Xtreme X35Pneumatic Paint PumpRoyson Vibratory Parts Tub40” Long x 20” Wide x 18”Tub DimensionsGullco Model KBM-18Portable BevellerRusch Machine Model 800Tube and Pipe NotchingMachine (New 2004)

Scotchman Model GritflexBelt Grinder; 6” Belt Width(2) George Fischer ModelREB-6 Pipe End DeburrsH.M. Machinery ModelSE2036M Geared Drill; s/n354321, 22” Long x 18” WideTableEnco Bench Top Mill Drill;29” x 8” Table6” Belt / 14” Disc WiltonCombination Sander

LIFTING EQUIPMENTOptima Model OP-925Digital Crane Scale4,000 Lb. Anver ModelL400M8-190-4/44 VacuumSheet Lifter SEE PHOTO

3,300 Lb. Kilner VaccumPlate Lifter; s/n 13731, 27’Long (New 2012)

1,500 Lb. Anver ModelL150M6-86-3/44 VacuumSheet Lifter750 Lb. Anver Model VLM-W/PA145-5-3 Single CupVacuum Lifter300 Lb. Walker MagneticsModel WBM-13PB ElectricLifting Magnet; S/N 394

AIR COMPRESSOR30- HP Gardener DenverModel EBE99N15 RotaryScrew Horizontal Tank AirCompressorGardner Denver ModelRNC150A1C2 Air Dryer; S/NGD150A1150406041

FORK LIFTS /SCISSOR LIFT2011 - 15,000 Lb. YaleModel GDC155 DieselPower Cushion Tire LiftTruck; S/N D879V01840J,Cummins B.3.3 Engine, 2-StageMast, 94” Lift Height, 86” MastHeight, 72” Forks, ForkPositioning, Techtronix 332Transmission, 3,692 Hours

SEE PHOTO

2013 - 8,000 Lb. HysterModel H80FT LP Gas SolidPneumatic Tire Lift Truck;S/N P005V05200K, 2-StageMast, 128” Lift Height, 88” MastHeight, Cab Enclosure, Monotrol

Fingertip Cotnrols, HydraulicFork Positioning, 48” Forks,13,720 Lb Weight, 9,210 Hours

SEE PHOTO

2012 - 5,000 Lb. HysterModel S50T LP GasCushion Tire Lift Truck; S/NF187V21100K, 2-Stage Mast,129” Lift Height, 83” MastHeight, 48” Forks, Side Shift,Fork Positioning, FingertipControls, 10,063 HoursJLG Model 2630ES SelfTraveling Electric ScissorLift Platform; s/n 0200183646(New 2008) SEE PHOTO

ALTO Model 575-100Electric Sit-Down FloorScrubber; S/N 360487, 586Hours

SHOP EQUIPMENT(5) Self Dumping Hoppers(100+) Pipe Stands(40) Rigid Tristands(25+) Step Ladders - 3’ to12’(10+) HD Electric Grinders,Hand Tools, C-Clamps, Magnetic Levels,Metal Plate Stock Racks,(10+) Shop Pedestal Fans,(20+) Sections PalletRacking with Contents

(2) 450 Amp LincolnPowerwave 455M Welders

(4) 450 Amp Miller Pipe Pro 450RFCWelders w/ Model Pipe Pro 12RC SuitcaseWire Feeds

(3) 300 Amp Miller Tigrunner Dynasty300 Tig Welders

WEBCAST BIDDER INSTRUCTIONS➢ All Internet bidders must register for this auction at www.bidspotter.com at least 48-Hours Prior to the Sale Date, if

you do not you will not be approved.

➢ All Internet bidders must Post a Deposit of Approx. 25% of Your Planned Spending Budget or$5,000.00 Minimum with Cincinnati Industrial Auctioneers in Order to be approved to Bid.Those who do Not Post the Deposit Will Not be Approved. Period.

(3) 5’ x 8’ Acorn Style Cast Iron WeldingTables w/ Stands

60 Ton IRCO Model 60TON Motorized TankTurning Roll Set w/ Idler

Bug-O Model SEC-1590-E Saddle and ElbowPlasma Pipe Beveling Machine

96” Long x 48” Wide Bluco Demmeler andAcorn Welding Fit-Up Table w/ Fixturing

7,500 Lb. Pandjiris Model 75MVRMT Tiltingand Rotating Welding Positioner

Fryer Model HR-60 Three-Axis CNC BedType Horizontal Milling Machine

2011 - 15,000 Lb. Yale Model GDC155 Diesel Power CushionTire Lift Truck

2013 - 8,000 Lb. Hyster Model H80FT LP Gas SolidPneumatic Tire Lift Truck

NEW2004


FIRST CLASS MAIL!

Important MailTO BE DIRECTED TO THE ATTENTION OF EXECUTIVE PERSONNEL☞

All equipment described herein will be sold “asis”, “where is” to the highest bidder or biddersfor cash in accordance with our regular termsand conditions of sale. Unless other satisfactoryarrangements are made, a 25% deposit in cash,certified or cashier’s check payable to CincinnatiIndustrial Auctioneers, Inc., is required on allpurchases. Firm and personal checks acceptedonly if accompanied by a letter from your bankguaranteeing your funds. All sales are subjectto state and/or local taxes unless a signedexemption form is presented at the time of pur-chase. All balances are due at the conclusionof the sale. No merchandise may be removedwhile the sale is in progress. All bidders mustcomply with our Standard Terms of Sale,copies of which will be available at the sale siteor can be obtained from our website.

15% ONSITE BUYER’S PREMIUM18% ONLINE BUYER’S PREMIUM

TERMS OF SALE

100 Miles Northeast ofPittsburgh, PA

Please Use Your GPS

DIRECTIONS

WEDNESDAY, JANUARY 25THWEDNESDAY, JANUARY 25TH

GLOBALFABRICATION, INC.

Although information has been obtained fromsources deemed reliable, the auctioneer makes nowarranty or guarantee, expressed or implied, as tothe accuracy of the information herein contained. It is for this reason that buyers should avail them-selves of the opportunity to make inspection prior to the sale. This brochure is intended to provide general information of the equipment being offered and is subject to errors, omissions, additions or deletions.Please check with the Auctioneer’s Office for a final listing. Items offered may or may not necessarily besold as described and/or photographed in this brochure.

MAIL BIDS ACCEPTED WITH A 25% DEPOSIT

IMPORTANT NOTICE:

PRE-SORTFIRST CLASS

U.S. POSTAGEPAID

CINCINNATI, OHIOPERMIT NO. 3593

Plant Closed


235 Beaver DriveDubois, Pennsylvania 15801


(25) Welders(25) Welders(25) Welders Late Model Fork LiftsLate Model Fork LiftsLate Model Fork Lifts

Trumpf CNC BrakeTrumpf CNC BrakeTrumpf CNC Brake Roundo Plate RollRoundo Plate RollRoundo Plate Roll


Plant Closed

GLOBALFABRICATION, INC.235 Beaver Drive – Dubois, Pennsylvania 15801


SALE DATE:Wednesday, January 25th

STARTING: 9:00AMINSPECTION:

Tuesday, January 24th10:00 AM to 4:00 PM



Contact Information2020 Dunlap St.Cincinnati, Ohio 45214Phone 513-241-9701Fax 513-241-6760www.cia-auction.com

Cincinnati Industrial Auctioneers –PA License No. AY002219

Jeffrey L. Luggen – PA License No. AU003274RJoseph M. Luggen – PA License No. AU005954

AUCTIONEERS



Sale Under The Management Of

Cincinnati Industrial Auctioneers2020 Dunlap St., Cincinnati, Ohio 45214Phone 513-241-9701 Fax 513-241-6760cia-auction.com | [email protected]

In Conjunction With

HGR Industrial Surplus20001 Euclid Ave., Cleveland, Ohio 44117Phone 216-486-4567 Fax 216-486-4779hgrinc.com | [email protected]


plant closed global fabrication,...

Documents