petenetlive - kb0000495 - hp _ 3com - setup the v1910-24g switch

4
20/ 11/ 12 Pet eNet Li ve - KB0000495 - HP / 3CO M - Set up t he V1910- 24G Swi t ch 1/ 4 www. pet enet l i ve. com/ KB/ Art i cl e/ 0000495. ht m 18 KB 0000495 Dated 20/08/11 Revision 0.01 HP / 3COM - Setup the V1910-24G Switch Problem I was surprised this week when I went to fit one of these switches, I know HP bought 3Com some time ago but when I popped open the HP box I did not expect to see a 3Com switch. Anyway, heres a very quick run down on initial setup (assign IP and secure the system passwords). Solution 1. On the chassis locate the sticker with the serial number on it, on here it will show you the IP address that its set to by default, this is an IP in the 169.254.x.x range so providing you have a laptop/PC set up for DHCP simply connect it to the Switch (any port) and you can open a web browser session to it. 2. Default access is user name admin with a blank password.

Upload: pernandos

Post on 30-Oct-2014

109 views

Category:

Documents


3 download

TRANSCRIPT

Page 1: PeteNetLive - KB0000495 - HP _ 3COM - Setup the V1910-24G Switch

20/ 11/ 12 Pet eNet Live - KB0000495 - HP / 3CO M - Set up t he V1910- 24G Swit ch

1/ 4www. pet enet live. com / KB/ Ar t icle/ 0000495. ht m

18

KB 0000495

Dated 20/08/11

Revision 0.01

HP / 3COM - Setup the V1910-24G Switch

Problem

I was surprised this week when I went to fit one of these switches, I know HP bought3Com some time ago but when I popped open the HP box I did not expect to see a 3Comswitch.

Anyway, heres a very quick run down on initial setup (assign IP and secure the systempasswords).

Solution

1. On the chassis locate the sticker with the serial number on it, on here it will show youthe IP address that its set to by default, this is an IP in the 169.254.x.x range soproviding you have a laptop/PC set up for DHCP simply connect it to the Switch (any port)and you can open a web browser session to it.

2. Default access is user name admin with a blank password.

Page 2: PeteNetLive - KB0000495 - HP _ 3COM - Setup the V1910-24G Switch

20/ 11/ 12 Pet eNet Live - KB0000495 - HP / 3CO M - Set up t he V1910- 24G Swit ch

2/ 4www. pet enet live. com / KB/ Ar t icle/ 0000495. ht m

3. To change the password, select Users >Modify.

4. Select the admin user and change the password below. Note: You can add additionalusers here as well.

5. To change the management IP address, select Network > VLAN Interface > Modify.

Site Search.. Suka 0powered by

Socialbar

Page 3: PeteNetLive - KB0000495 - HP _ 3COM - Setup the V1910-24G Switch

20/ 11/ 12 Pet eNet Live - KB0000495 - HP / 3CO M - Set up t he V1910- 24G Swit ch

3/ 4www. pet enet live. com / KB/ Ar t icle/ 0000495. ht m

6. Out of the box you will only have one VLAN, change the setting to manual.

7. Set the required IP and Subnet mask > Apply (At this point you will be kicked out of themanagement console, connect the switch to your live network and you will be able toconnect to its new address).

Page 4: PeteNetLive - KB0000495 - HP _ 3COM - Setup the V1910-24G Switch

20/ 11/ 12 Pet eNet Live - KB0000495 - HP / 3CO M - Set up t he V1910- 24G Swit ch

4/ 4www. pet enet live. com / KB/ Ar t icle/ 0000495. ht m

If this post helped you, PLEASE take the time to +1 it. 18

Please be aware, all information is provided free, but it does cost me to have this sitehosted, if I've helped you in any way, or saved you some time/cost please take time tomake a donation.

If you have anything to add to an article, or have an article you would like us to publishplease feel free to contact PeteNetLive. (Please be aware I get a LOT of email, I cannotassist and fix everyone's problems, please do not be offended if you do not get aresponse).

Related Articles, References, Credits, Or External Links

NA

PeteNetLive ©2012 : Privacy Policy