pet stretch blow molding machines
TRANSCRIPT
BLOW MOLDING TECHNOLOGIESFlexibility, Speed and Quality are Key for Custom Blow Molders
BUILT SPECIFICALLY FORCUSTOM BLOW MOLDERS
As a custom blow molder, you demand
more from your equipment. At Amsler, we
deliver machines that are simple to run
and maintain with fewer moving parts.
Our quick changeovers are a must have.
Amsler machines range from 1 to 4 cavities
with outputs of 1,500 to 6,000 bottles per
hour. Consistent, quality output is built into
everything we make.
In addition to providing top quality
equipment, we will partner with you to help
develop and test your package.
Amsler is the only North American
manufacturer of all-electric linear PET stretch
blow molders, 100% designed, built and
serviced in North America.
ADVANTAGES
ENERGY EFFICIENCY
» Servo electric movements to save energy
» Closely spaced preforms saves energy
» Less air consumption saves energy
RELIABILITY
» Easy to maintain» Machines require 75% less maintenance
than hydraulic machines
PRODUCTIVITY
» Output speeds of up to 6,000 bottles/hr
» Proven efficiencies and repeatability
» Use Blow Molds from other brands including Sidel and MAG
»
L32 - 3 CAVITY CONVERTIBLE MACHINE
VERSATILITY
» Available in 1,2, 3 and 4 cavity models » Fast changeovers; 20 minutes to 2 hours» Few moving parts means higher reliability
FAST CHANGE-OVERS
» Perform carrier changes without tools» Quick oven adjustments» Easy access to all parts of the machinery
SIMPLE AND RUGGED
» Few moving parts» Heavy tubular welded construction» Very low maintenance
» DELIVERING MORE FROM YOUR BLOW MOLDING EQUIPMENT
» Adjustable air flow in the ovens
» Unblown preform rejection system
» Safety warnings and machine shutdown on low air pressure
» Individual low pressure blowing with flow control valves
» Checklists on the touchscreen operator panel
» Adjust the mold closing speed on the touchscreen operator panel
» Adjust preform transport speed on the touch screen operator panel
» Adjustable preform rotation speed on the touch screen operator panel
» All settings are stored in the recipe memory
» Fault screen with real time display
» Automatic starting and stopping with bottle back up sensors on the downstream conveyor.
» Closed loop oven control
» Servo operated stretch rods (most models)
» Servo electrical mold clamping system
» All mechanical settings have scales for repeatability
» Quick mold change
» Quick preform carrier change
» Operator height mold access
» Molds are interchangeable between most models
» Major competitor’s molds can be fitted
» Blowing inhibit system for preforms that do not meet the right temperature.
» Color operator interface
» Automatic fault display
» Diagnostic screens
» Recipe Storage
» Separate cooling circuits for bottom inserts
» Preform temperature monitoring with alarm
» Electronic mold protection
» Height adjustable take out system to suit your conveyor system
CONVERTIBLE SERIES FOR THE CUSTOM BLOW MOLDER - FLEXIBLE CAVITATION
» L32 Convertible: Run 1, 2 or 3 cavities depending on the bottle size and output requirement. Necks up to 63mm.
» L42 Convertible: Run four cavities up
to 2 liter or two cavities up to 5 liter.
MACHINE TYPES
» Narrow Neck Series: L12, LM12, L15, LM15, L22X, L25, L32C, L32X, L42C, L43C (LM=manual loading of the preforms)
» Wide Mouth Jars: L15 JAR, L25 JAR,
» Large Format Containers: L110, LM120, L120 Convertible, L215
» Complete product chart available at amsler equipment.net
MACHINE CAPABILITY
» Hot Fill Containers
» Preferential heating
» Neck Orientation
» Wide Mouth Jars
» Small footprint
LARGE COLOR TOUCH SCREEN OPERATOR PANEL WITH ONSCREEN DIAGNOSTICS
» On Screen System Monitoring
» On Screen Diagnostics
» Water Flow Monitoring
» Water temperature Readout and Alarm
» Air Pressure Readout and Alarm
» Oven Temperature Readout
» Individual Preform Temperature Readout
STANDARD FEATURES
ABOUT US
W. Amsler Equipment Inc. is a Canadian company founded by Werner Amsler. Since 1994 the Amsler group has been helping plants in North America and worldwide with Blow Molding Machines and ancillary equipment such as: Leak Testers, Spin Trimmers, Air Compressors, Process Chillers, Mold Temperature-Control Units, Gaylord Dumpers, Palletizers, Labelers, Vacuum Conveyors, Blow Molds, Mold Testing, Pilot Production and Turn
Key Plant Design and Installation.
W. Amsler Equipment Inc. is the only North American manufacturer of all-electric linear PET stretch blow molding equipment, 100%
designed, built and serviced in North America.
Amsler Packaging Solutions can offer filling equipment and turnkey installations for Liquid Filling Projects.
SERVICE AND TECHNICAL SUPPORT
Our service technicians are based in the US, Canada and Mexico. They are available for both onsite and phone support.
You can reach support by emailing [email protected] or by calling toll-free 1-877-738-2569 (US, Canada), or 905-707-6704.
NEXT DAY PARTS DELIVERY ACROSS NORTH AMERICA
More details are available at www.amslerequipment.net/sales
CONTACT INFORMATION
CANADA
Phone: 905-707-6704Toll Free: 1-877-738-2569Fax: 905-707-6707
W. Amsler Equipment Inc., 1245 Reid Street Unit #1, Richmond Hill, Ontario, Canada, L4B 1G4
UNITED STATES Toll Free: 1-877-738-2569
MEXICO, LATIN AMERICA, CARIBBEANPhone: 905-707-6704
www.amslerequipment.net