peripherals: accessories & wearables - loctite · peripherals: accessories & wearables. 2 |...
TRANSCRIPT
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the U.S. and elsewhere. ® = registered in the U.S. Patent and Trademark Office. © 2014 Henkel Corporation. All rights reserved. 13418/LT-7059 (11/14)
U.S.A
Henkel Corporation
One Henkel Way
Rocky Hill, Connecticut 06067
Tel: 1.800.LOCTITE (562.8483)
Tel: + 1 860 571 5100
Fax: + 1 860 571 5465
www.loctite.com/hhdd
ASIA PACIFIC & CHINA
928 Zhangheng Road
Zhangjaiang High-Tech Park
Pudong New DIstrict
Shanghai 201203, P.R. China
Tel: +86 21 2891 8000
Fax: +86 21 2891 8971
Peripherals:Accessories & Wearables
2 | Peripherals Peripherals | 3
For more information, visit
loctite.com/hhdd
APPLICATION PRODUCT(S) RECOMMENDED BENEFITS
MEMBRANE SYSTEM
Membrane + Voice CoilUV Acrylic Adhesive• LOCTITE® 3040™ Light Cure Adhesive
• Apply to high and low audio frequency voice coil• Adapt to most membrane materials bonding• Good fluidness to avoid adhesive oozing
Membrane Damping
Light Cure Adhesives• LOCTITE® 3198DM™ Light Cure Adhesive• LOCTITE® 5192DM™ Light Cure Adhesive
• Enables good audio quality• Easily used in production line• Fast fixture• Constant application and performance
Membrane + Frame
PUR™ Hot Melt Adhesives• LOCTITE® 3542™ Structural Adhesive • LOCTITE® 3572™ Structural Adhesive• LOCTITE® 3580™ Structural Adhesive• LOCTITE® HHD 3582™ Structural Adhesive
MS Polymer Adhesive• LOCTITE® HHD 9393™ Structural Adhesive
• High strength • Good thixotropic performance for easy application• Soft enough
MAGNET SYSTEM
Magnet + Magnet Fillet
1-Part Epoxy Adhesive• LOCTITE® 3212™ Adhesive
Structural Anaerobic Adhesive• LOCTITE® 3275™ Adhesive
• Ideal for nickel plating and galvanized plating substrates bonding
• High strength before and after aging• Fast cure in manual and auto line process
WIRE FIXING
Wire Fixing
UV Acrylic Adhesives• LOCTITE® 3334™ Light Cure Adhesive• LOCTITE® 3523™ Light Cure Adhesive
• Fast cure• Easy application• High strength• Appropriate hardness• Appropriate viscosity
FINAL ASSEMBLY
Frame + Front Cover
PUR™ Hot Melt Adhesives• LOCTITE® 3542™ Structural Adhesive • LOCTITE® 3572™ Structural Adhesive• LOCTITE® 3580™ Structural Adhesive• LOCTITE® HHD 3582™ Structural Adhesive
MS Polymer Adhesive• LOCTITE® HHD 9393 Structural Adhesive
• High strength• Fast cure• Easy application
Front Cover SealingUV Acrylic Adhesive• LOCTITE® 3106™ Light Cure Adhesive
• High strength• Fast cure• Easy application
Flat Panel Speaker (FPS) Applications
Magnet Fillet
Front Cover
Membrane
Voice Coil
Basket
Magnet
Magnet Tile
Pole Piece
Frame
EarphoneApplications
Sub-enclosure
Cabinet/ Basket
Magnet Voice Coil
MembraneSub-enclosure
SPEAKER
APPLICATION PRODUCT(S) RECOMMENDED BENEFITS
Sub-Enclosures Bonding for Housing Forming
PUR™ Hot Melt Adhesives• LOCTITE® 3542™ Structural Adhesive• LOCTITE® 3572™ Structural Adhesive
• Fast cure and long open time• High flexibility, good impact strength• Good bonding strength on various substrates• Low outgassing, no damage to membrane
Voice Coil to Membrane Bonding
UV Acrylic Adhesive• LOCTITE® 3040™ Light Cure Adhesive
• Bonding for high and low audio frequency voice coil• Bonding of most membrane materials• High rheology to avoid adhesive oozing
Membrane to Cabinet Bonding
UV Acrylic Adhesive• LOCTITE® 3040™ Light Cure Adhesive
PUR™ Hot Melt Adhesive• LOCTITE® 3573™ Structural AdhesiveMS Polymer Adhesive• LOCTITE® HHD 9393™ Structural Adhesive
• High strength• Flexible• Good thixotropic performance for easy
application
Magnet to Frame Bonding
1-Part Epoxy Adhesive• LOCTITE® 3212™ AdhesiveStructural Anaerobic Adhesive• LOCTITE® 3275™ Adhesive
• Ideal for bonding nickel plated and galvanized plated substrates
• High strength before and after aging• Fast cure in manual and auto line process• High dynamic resistance
Combox/Remote: Cover to Frame Bonding
PUR™ Hot Melt Adhesive• LOCTITE® 3542™ Structural Adhesive2-Part Acrylic Adhesive• LOCTITE® HF8075LV™ Structural Adhesive
• Structural adhesive provides good bond strength• Good impact resist performance
Wire Fixing / Soldered Dot Protection
UV Acrylic Adhesive• LOCTITE® 4305™ Flash Cure
Light Cure Instant Adhesive
• Flexibility - enhances the load-bearing and shock- absorbing characteristics
• Excellent adhesion to a wide variety of substrates
UV Acrylic Adhesives• LOCTITE® 190024™ Light Cure Adhesive• LOCTITE® 3334™ Light Cure Adhesive
• Flexibility - enhances the load-bearing and shock- absorbing characteristics
• Excellent adhesion to a wide variety of substrates
HeadphoneApplications
Ear CushionBaffle / Driver
Faceplate
Earcup
DriverSupport
Enclosure
Yoke/ Frame
Magnet
RingVoice Coil Membrane/
Diaphragm
Outer Housing
DRIVER UNIT
APPLICATION PRODUCT(S) RECOMMENDED BENEFITS
Ear Cushion Bonding
PUR™ Hot Melt Adhesives• LOCTITE® 3542™ Structural Adhesive• LOCTITE® 3572™ Structural AdhesiveMS Polymer Adhesive• LOCTITE® HHD 9393™ Structural Adhesive
• Good bonding strength on various substrates• Easy to rework before fully cured
Wire Fixing / Soldered Dot Protection
UV Acrylic Adhesive• LOCTITE® 190024™ Light Cure Adhesive
• Flexibility - enhances the load-bearing and shock- absorbing characteristics
• Excellent adhesion to a wide variety of substrates
Wire Fixing Cyanoacrylate Adhesives• LOCTITE® HF403™ Instant Adhesive• LOCTITE® HF4305™ Instant Adhesive
• Low blooming• Excellent adhesion to a wide variety of substrates
Combox/Remote Enclosure Assembly
PUR™ Hot Melt Adhesive• LOCTITE® 3542™ Structural Adhesive2-Part Acrylic Adhesive• LOCTITE® HF8075LV™ Structural Adhesive
• Structural adhesive provides good bond strength• Fast fixture
Headband Bonding
Cyanoacrylate Adhesives• LOCTITE® 4850™ Instant Adhesive• LOCTITE® 4860™ Instant Adhesive
• Specifically formulated to provide flexible bondlines• Designed for the assembly of difficult-to-bond materials• Rapid bonding of a wide range of materials
Baffle to Ear Cushion Bonding
MS Polymer Adhesives• LOCTITE® HHD 9391™ Structural Adhesive• LOCTITE® HHD 9393™ Structural Adhesive
• Good bonding strength• Easy to rework before fully cured
Driver Support Enclosure to Baffle Bonding
2-Part Acrylic Adhesive• LOCTITE® HF8075LV™ Structural Adhesive
• Rapid cure, forming tough & resilient bonds• Excellent bonding strength• Low viscosity• Typically suitable for bonding plastic and metal
components that must withstand vibrations and impacts
Earcup to Baffle Sealing
Light Cure Silicone• LOCTITE® 5240™ Nuva-Sil® Medical
Device Sealant
• Cured-in-place gasket• UV and moisture dual cure system• High elongation and low modulus• No corrosion
Hole Air Tight for Cable Routing
MS Polymer Adhesive• LOCTITE® HHD 9393™ Structural AdhesiveUV Acrylic Adhesive• LOCTITE® 5425™ Light Cure Adhesive
• Fast cure and long open time• High flexibility, good impact strength• Good bonding strength on various substrates
Threadlocking Anaerobic Threadlocker Adhesive• LOCTITE® 243™ Threadlocker,
Medium Strength
• Prevent loosening from shock and vibration• Stop rust and corrosion• Seal threads – allow through-hole tapping• Available in a variety of viscosities and strengths
APPLICATIONPRODUCT(S) RECOMMENDED
BENEFITS
Magnet to Yoke/Plate Bonding
1-Part Epoxy Adhesive• LOCTITE® 3212™
AdhesiveStructural Anaerobic Adhesive• LOCTITE® 3275™
Adhesive
• Ideal for bonding nickel plated and galvanized plated substrates
• High strength before and after aging
• Fast cure in manual and auto line process
• High dynamic resistance
Membrane Damping
Light Cure Adhesives• LOCTITE® 3198DM™
Light Cure Adhesive• LOCTITE® 5192DM™
Light Cure Adhesive
• Enables good audio quality
• Easily used in production line
• Fast fixture• Constant application
and performance
Voice Coil to Membrane Bonding
UV Acrylic Adhesive• LOCTITE® 3040™ Light
Cure Adhesive
• Bonding for high and low audio frequency voice coil
• Bonding of most membrane materials
• High rheology to avoid adhesive oozing
Membrane to Driver Support Enclosure Bonding
PUR™ Hot Melt Adhesive• LOCTITE® 3542™
Structural AdhesiveMS Polymer Adhesive• LOCTITE® HHD 9393™
Structural Adhesive
• High strength• Good thixotropic
performance for easy application
• Flexible
SUB-ASSEMBLY: DRIVER UNIT