pec power take-offs & quality clutch parts · pec power take-offs & quality clutch parts...

1

PEC Power Take-Offs & Quality Clutch Parts

PEC Power Take-Offs are designed to fit all internal combustion engines with stan-dard SAE flywheel housing dimensions from No. 6 through No. O. The clutchesrange in size from one plate 6” to three plate 14”. Suitable power take-offs areavailable for use with engines in industrial installations up to 583 horsepower.

A Power Take-Off consists of a complete clutch assembly with shaft and bearingsmounted in a cast iron housing that provides for easy engine installation.

PTO’s are used as a standard method for transmitting the power of engines in agreat variety of industrial applications such as: air compressors, agricultural ma-chinery, pump drives, crushers, road building machinery, cranes and shovels, oilfieldservice, etc.

PEC offers power take-offs for all industrial engines with sealed pilot bearings toeliminate the lubrication requirement and shaft rifle-drilling normally encounteredwith standard pilot bearings.

Actual design torque capacity of the clutches used in power take-offs is in excessof the horsepower rating listed. This permits PEC power take-offs in proper ad-justment to withstand temporary torque overloads. Rated torque can be trans-mitted while moderately slipping during short periods without permanent damage.

CO-STYLEPOWER TAKE-OFF

CN-STYLEPOWER TAKE-OFF

PEC Manufacturing1-800-255-99752

34

3233

31

2928

3027

26

24

25 17

23 2221

13

12

15

1614

17

18

19

6

7

8

9

1110

35 3637

38 39 40

41 42

43

45

44

47 48

46

4911

1

2

3

45

Assemblies: 7X-850-4 CONVERSION KIT W/1 7/16 OUTPUT7X-850-5 CONVERSION KIT W/1 7/16 OUTPUT7X-850-6 CONVERSION KIT W/1 7/16 OUTPUT7X-851-4 CONVERSION KIT W/1 3/4 OUTPUT7X-851-5 CONVERSION KIT W/1 3/4 OUTPUT7X-851-6 CONVERSION KIT W/1 3/4 OUTPUT

20

1 Plate 6" Model CO1-06-5A1 Plate 7" Model CO1-07-5A

3

ITEM NO. DESCRIPTION PART NO. QTY. 1 PLATE 6 " 1 PLATE 7" CO1-06-5A CO1-07-5A

1 HOUSING SAE #5 7X-291-5 12 HAND LEVER 10-214 13 HEX HEAD SCREW (incl. w/hand lever) 14X-253 14 ROUND HEAD SCREW 10-248 25 INSPECTION PLATE COVER 7X-316 16-8 GREASE HOSE ASSEMBLY 10-801 16 GREASE HOSE 10-227 17 FITTING 10-230 18 FITTING 10-229 19 LOCK WASHER 10-252 110 JAM NUT 10-247 111 FITTING 10-260 212-30 CLUTCH PACK CO1-06A CO1-07A 112-20 SLIDING SLEEVE ASSEMBLY 7X-500 112-15 BRASS COLLAR ASSEMBLY 10X-701 112 BRASS COLLAR 10X-123 113 HEX HEAD SCREW 10-244 214 HEX NUT 10-249 215 SHIM 10X-127 216 SLIDING SLEEVE 7X-304 117 COTTER PIN 10-264 818 LEVER LINK 7X-305 819 LEVER LINK PIN 7X-306 420 LEVER LINK PIN 7X-307 421-25, 17 ADJUSTING YOKE ASSEMBLY 7X-600 121 ADJUSTING YOKE 7X-299 122 ADJUSTING LOCK PIN SPRING 7X-303 123 ADJUSTING LOCK PIN 7X-302 124 LEVER PIN 7X-301 425 LEVER 7X-300 426 FLOATING PLATE 6X-323 7X-308 127 DRIVE PLATE (SOLID) 6X-099A 7X-100A 1

DRIVE PLATE (3 PIECE) 6X-099 7X-100 128-29 HUB & BACK PLATE ASSEMBLY 6X-324A 7X-296A 128 HUB & BACK PLATE 6X-324 7X-296 129 PLATE PIN 7X-283 130 RELEASE SPRING 7X-310 631 DRIVING RING 6X-325 7X-312 132 SHAFT WASHER 7X-313 133 SHAFT NUT 7X-314 134 PILOT BEARING * 7X-282 135 HEX HEAD SCREW 10-245 436 LOCK WASHER 10-250 437 BEARING RETAINER 7X-315 138 MAIN BEARING 7X-281 139 HUB KEY 7X-317 140 SNAP RING 7X-319 141 SHAFT (1 7/16 DRILLED) 7X-293 1

SHAFT (1 3/4 DRILLED) 7X-293A 1SHAFT (1 3/4 SOLID) 7X-293B 1

42 OUTPUT KEY ( 1 7/16 shaft) 11X-235 1OUTPUT KEY (1 3/4 shaft) 7X-318 1

43 FITTING 10-261 144 OPERATING SHAFT 7-295 145 WOODRUFF KEY 10-233 246 THROWOUT YOKE 10X-175 147 HEX HEAD SCREW (incl. w/yoke) 10-246 248 LOCK WASHER (incl. w/yoke) 10-251 249 FITTING 10-262 2

*See Bearing Interchange for Optional Bearings on page 20.


1 Plate 6" Model CN1-06-5A1 Plate 7" Model CN1-07-5A

35 3738

39

4041

42

39

36

43

45

44

46

47 4849 11

1

2

3

54

10

8

9

11

34

3233

31

2928

3027

26

212223

13

12

15

14

6

16

19

18

17

1725

24

720

Double BearingStyle

5

ITEM NO. DESCRIPTION PART NO. QTY. 1 PLATE 6" 1 PLATE 7" CN1-06-5A CN1-07-5A

1 HOUSING SAE #4 7X-750-4 1HOUSING SAE #5 7X-750-5 1HOUSING SAE #6 7X-750-6 1

2 HAND LEVER 10-214 13 HEX HEAD SCREW (incl. w/hand lever) 14X-253 14 ROUND HEAD SCREW 10-248 25 INSPECTION PLATE COVER 7X-316 16-8 GREASE HOSE ASSEMBLY 10-801 16 GREASE HOSE 10-227 17 FITTING 10-230 18 FITTING 10-229 19 LOCK WASHER 10-252 110 JAM NUT 10-247 111 FITTING 10-260 112-30 CLUTCH PACK C01-06A C01-07A 112-20 SLIDING SLEEVE ASSEMBLY 7X-500 112-15 BRASS COLLAR ASSEMBLY 10X-701 112 BRASS COLLAR 10X-123 113 HEX HEAD SCREW 10-244 214 HEX NUT 10-249 215 SHIM 10X-127 216 SLIDING SLEEVE 7X-304 117 COTTER PIN 10-264 818 LEVER LINK 7X-305 819 LEVER LINK PIN 7X-306 420 LEVER LINK PIN 7X-307 421-25, 17 ADJUSTING YOKE ASSEMBLY 7X-600 121 ADJUSTING YOKE 7X-299 122 ADJUSTING LOCK PIN SPRING 7X-303 123 ADJUSTING LOCK PIN 7X-302 124 LEVER PIN 7X-301 425 LEVER 7X-300 426 FLOATING PLATE 6X-323 7X-308 127 DRIVE PLATE (SOLID) 6X-099A 7X-100A 1

DRIVE PLATE (3 PIECE) 6X-099 7X-100 128-29 HUB & BACK PLATE ASSY. 6X-324A 7X-296A 128 HUB & BACK PLATE 6X-324 7X-296 129 PLATE PIN 7X-283 130 RELEASE SPRING 7X-310 631 DRIVING RING 6X-325 7X-312 132 SHAFT WASHER 7X-313 133 SHAFT NUT 7X-314 134 PILOT BEARING * 7X-282 135 HEX HEAD SCREW 10-245 136 LOCK WASHER 10-250 137 BEARING RETAINER LOCK 10-159 138 BEARING RETAINER 7X-340 139 MAIN BEARING 8X-285 240 HUB KEY 7X-317 141 SHAFT (1 7/16 SOLID) 7X-333 1

SHAFT (1 7/16 DRILLED) 7X-333A 1SHAFT (1 3/4 SOLID) 7X-334 1SHAFT (1 3/4 DRILLED) 7X-334A 1

42 OUTPUT KEY (1 7/16 SHAFT) 11X-235 1OUTPUT KEY (1 3/4 SHAFT) 7X-318 1

43 FITTING 10-261 144 OPERATING SHAFT 7-295 145 WOODRUFF KEY 10-233 246 THROWOUT YOKE 10X-175 147 HEX HEAD SCREW (incl. w/yoke) 10-246 248 LOCK WASHER (incl. w/yoke) 10-251 249 FITTING 10-262 2



1 Plate 8" Model CO1-08-3A1 Plate 10" Model CO1-10-3A1 Plate 11" Model C1-11-3A

33 32 31

30

28

29

2726

23

2122

2425

19

18 17

16

13

1412

15

1214

7

13 891011

54

2

1

3

1148

45

4746

43

44

38

414039

383736

35

34

20

6

42

52 5150 49

53

7*See Bearing Interchange for Optional Bearings on page 20.

ITEM DESCRIPTION PART NO. QTY.1 PLATE 8" 1 PLATE 10" 1 PLATE 11"CO1-08-3A CO1-10-3A C1-11-3A

1 HOUSING SAE #2 10X-101-2 1HOUSING SAE #3 8X-292-3 10X-101-3 1HOUSING SAE #4 8X-292-4 10X-101-4 1HOUSING SAE #5 8X-292-5 1

2 HAND LEVER 10-214 13 HEX HEAD SCREW (incl. w / hand lever) 14X-253 14 ROUND HEAD SCREW 10-248 25 INSPECTION PLATE COVER 10-272 1

COVER FOR SAE #5 7X-316 16-8 GREASE HOSE ASSEMBLY 10-801 16 GREASE HOSE 10-227 17 FITTING 10-230 18 FITTING 10-229 19 LOCK WASHER 10-252 110 JAM NUT 10-247 111 FITTING 10-260 112-29 CLUTCH PACK C01-08A C01-10A C1-11A 112-19 SLIDING SLEEVE ASSEMBLY 10X-501 112-15 BRASS COLLAR ASSEMBLY 10X-701 112 BRASS COLLAR 10X-123 113 HEX HEAD SCREW 10-244 214 HEX NUT 10-249 215 SHIM 10X-127 216 SLIDING SLEEVE 10X-191 117 COTTER PIN 10-264 118 LEVER LINK 10X-199 819 LEVER LINK PIN 10-203 820-25 ADJUSTING YOKE ASSEMBLY 10X-601 120 ADJUSTING YOKE 10X-172 121 ADJUSTING LOCK PIN SPRING 10X-188 122 ADJUSTING LOCK PIN 10X-185 123 LEVER PIN 10X-202 424 LEVER 10X-182 425 COTTER PIN 10-263 426 FLOATING PLATE 8X-309 10X-118 11X-418 127 DRIVE PLATE (SOLID) 8X-290A 10X-131A 11X-132A 1

DRIVE PLATE (3 PIECE) 8X-290 10X-131 11X-132 128 HUB & BACK PLATE 8X-297 10X-112 11X-413 129 RELEASE SPRING 8X-311 10X-212 630 DRIVING RING 8X-298 10X-149 11X-150 131 SHAFT WASHER 10-167 132 SHAFT NUT 10X-161 133 PILOT BEARING * 8X-284 10-216 134 HEX HEAD SCREW 10-245 135 LOCK WASHER 10-250 136 BEARING RETAINER LOCK 14X-160 10-159 137 BEARING RETAINER 8X-329 10-155 138 MAIN BEARING 8X-285 10-221 239 HUB KEY 10X-232 140 SHAFT (SOLID) 8X-294A 10X-136A 1

SHAFT (DRILLED) 8X-294 10X-136 141 OUTPUT KEY 8X-321 10X-231 142 FITTING 10-261 143 OPERATING SHAFT (SAE #2 & #3) 10X-142 1

OPERATING SHAFT (SAE #4 & #5) 7-295 144 WOODRUFF KEY 10-233 245 THROWOUT YOKE 10X-175 146 HEX HEAD SCREW (incl. w / yoke) 10-246 247 LOCKWASHER (incl. w / yoke) 10-251 248 FITTING 10-262 249-53 BALL BEARING SLEEVE ASSEMBLY 10X-512 149 SNAP RING (sleeve) 11X-365 150 COLLAR 11X-349 151 BALL BEARING 11X-362 152 SNAP RING (collar) 11X-364 153 SLIDING SLEEVE 11X-354 1


1 Plate 11" Model CO1-11-3A2 Plate 11" Model CO2-11-3A

54

53

5152

35

34

33

3231

46

45

47

36

37

3839

40

4142

43

40

44

50

2

12

4

3

129

3029

28 21 17

15

7

6 5

48 49

1211

109

8

20

1413

16

25

26 27

24

23

22

19

18

58 5756 55

59

9*See Bearing Interchange for Optional Bearings on page 20.

ITEM NO. DESCRIPTION PART NO. QTY. 1 PLATE 11 " 2 PLATE 11"CO1-11-3A CO2-11-3A

1 HOUSING SAE #1 11X-102-1 1HOUSING SAE #2 11X-102-2 11X-103-2 1HOUSING SAE #3 11X-102-3 11X-103-3 1

2 BEARING CARRIER 11X-102A 11X-103A 13 HAND LEVER 10-214 14 HEX HEAD SCREW(incl. w/ hand lever) 14X-253 15 ROUND HEAD SCREW 10-248 26 INSPECTION PLATE COVER 10-272 17-9 GREASE HOSE ASSEMBLY 10-801 14X-802 17 GREASE HOSE 10-227 14X-228 18 FITTING 10-230 19 FITTING 10-229 110 LOCK WASHER 10-252 111 JAM NUT 10-247 112 FITTING 10-260 113-31 CLUTCH PACK C01-11A C02-11A 113-20 SLIDING SLEEVE ASSEMBLY 11X-502 11X-503 113-16 BRASS COLLAR ASSEMBLY 11X-702 11X-703 113 BRASS COLLAR 11X-124 11X-125 114 HEX HEAD SCREW 10-244 215 HEX NUT 10-249 216 SHIM 11X-128 11X-129 217 SLIDING SLEEVE 11X-192 11X-196 118 LEVER LINK 11X-200 619 LEVER LINK PIN 10-203 620 COTTER PIN 10-264 621 ADJUSTING RING 11X-173 122 ADJUSTING LOCK PIN 11X-186 123 ADJUSTING LOCK PIN SPRING 11X-189 124 LEVER 11X-183 325 COTTER PIN 10-263 326 SPRING WASHER 11X-266 627 LEVER PIN 11X-205 328 FLOATING PLATE 11X-119 129 DRIVE PLATE (SOLID) (1)11X-132A (2)11X-132A

DRIVE PLATE (3 PIECE) (1)11X-132 (2)11X-13230 CENTER PLATE 11X-121 131 HUB & BACK PLATE 11X-113 11X-114 132 SHAFT WASHER 10-167 11X-168 133 SHAFT NUT 11X-162 11X-163 134 PILOT BEARING * 10-216 135 DRIVING RING 11X-150 11X-151 136 HEX HEAD SCREW 10-245 137 LOCK WASHER 10-250 138 BEARING RETAINER LOCK 10-159 139 BEARING RETAINER 10-155 11X-156 140 MAIN BEARING 10-221 11X-222 241 HUB KEY 11X-235 11X-236 142 SHAFT (SOLID) 11X-137A 11X-138 1

SHAFT (DRILLED) 11X-137 11X-138A 143 OUTPUT KEY 11X-234 144 FITTING 10-261 145 OPERATING SHAFT 11X-143 146 WOODRUFF KEY 10-233 247 THROWOUT YOKE 11X-176 11X-181 148 HEX HEAD SCREW (incl. w/yoke) 10-246 249 LOCK WASHER (incl. w/ yoke) 10-251 250 FITTING 10-262 251 HEX HEAD SCREW 14X-254 652 LOCK WASHER 14X-255 653 ADJUSTING RING (coarse thread) 11X-173 C 154 HUB & BACK PLATE (coarse thread) 11X-113C 11X-114 C 155-59 BALL BEARING SLEEVE ASSEMBLY 11X-513 155 SNAP RING (sleeve) 11X-365 156 COLLAR 11X-350 157 BALL BEARING 11X-362 158 SNAP RING (collar) 11X-364 159 SLIDING SLEEVE 11X-359 1


2 Plate 11" Model CN2-11-3ALimited Attendance

44

42 43

4546

47

4849

5054 53

2

564

3

55

51

52

25

24

23 22

21

1920

19

18

1714 15

916

10 89

7

11

1213

27

26 28

2930

31

32

30

56

33

35

34

38

37

39

36

41

40

1

11

ITEM NO. DESCRIPTION PART NO. QTY. 2 PLATE 11" CN2-11-3A

1 HOUSING SAE #2 11X-103-2 1HOUSING SAE #3 11X-103-3 1

2 BEARING CARRIER 11X-103A 13 HAND LEVER 10-214 14 HEX HEAD SCREW (incl. w/hand lever) 14X-253 15 ROUND HEAD SCREW 10-248 26 INSPECTION PLATE COVER 10-272 17-21 CLUTCH PACK CN2-11A 17-10 SLIDING SLEEVE ASSEMBLY 11X-506 17 SLIDING SLEEVE 11X-193 18 LEVER LINK 11X-200 69 LEVER LINK PIN 10-203 610 COTTER PIN 10-264 611 ADJUSTING RING 11X-173 112 ADJUSTING LOCK PIN 11X-186 113 ADJUSTING LOCK PIN SPRING 11X-189 114 LEVER 11X-183 315 LEVER PIN 11X-205 316 SPRING WASHER 11X-266 617 COTTER PIN 10-263 318 FLOATING PLATE 11X-119 119 DRIVE PLATE (SOLID) 11X-132A 2

DRIVE PLATE (3 PIECE) 11X-132 220 CENTER PLATE 11X-121 121 HUB & BACK PLATE 11X-114 122 SHAFT WASHER 11X-168 123 SHAFT NUT 11X-163 124 PILOT BEARING * 11X-218 125 DRIVING RING 11X-151 126 HEX HEAD SCREW 10-245 127 LOCK WASHER 10-250 128 BEARING RETAINER LOCK 10-159 129 BEARING RETAINER 11X-156 130 MAIN BEARING 11X-222 231 HUB KEY 11X-236 132 SHAFT (SOLID) 11X-138 1

SHAFT (DRILLED) 11X-138A 133 OUTPUT KEY 11X-234 134 OPERATING SHAFT 11X-144 135 WOODRUFF KEY 10-233 236 THROWOUT YOKE 11X-177 137 HEX HEAD SCREW (incl. w/ yoke) 10-246 238 LOCK WASHER (incl. w/ yoke) 10-251 239 CAMROLL BEARING 11X-225 240 HEX NUT (incl. w/ camroll bearing) 10-249 241 STOP COLLAR 11-213 242-49 LOCATOR ASSEMBLY 11-901 142 NEUTRAL LOCK ARM 11-207 143 HEX HEAD SCREW 10-246 144 SNAP RING 11-268 145 SPRING 11-211 146 ROLLER PIN 11-210 147 RETAINING RING 11-269 148 DETENT ROLLER 11-209 149 HEADED PIN 11-208 150 HEX HEAD SCREW 14X-256 251 LOCK WASHER 10-251 252 DETENT LOCATOR 11-109 153 HEX HEAD SCREW 14X-254 654 LOCK WASHER 14X-255 655 FITTING 10-262 256 FITTING 10-260 1



1 Plate 14" Model CO1-14-1A2 Plate 14" Model CO2-14-1A3 Plate 14" Model CO3-14-1A

35

3432

33

3130

29

26 25

2724

28

23

22

21

1918 20

17

16

1314

1211

109

8

7

6 5

3

412

2

515250

4443

42

41

4039

3836

37

47

45

4948

46

15

53

54

55

56

1

2 Plate 14" - Small Bore

61

60 5958 57

13

ITEM NO. DESCRIPTION PART NO. QTY.1 PLATE 14" 2 PLATE 14" 3 PLATE 14"CO1-14-1A CO2-14-1A CO3-14-1A

1 HOUSING SAE #0 N/A 14X-105-0 14X-106-0 1HOUSING SAE #1 14X-104-1 14X-105-1 14X-106-1 1

2 BEARING CARRIER 14X-104A 14X-107 14X-108 13 HAND LEVER 14X-215 14 HEX HEAD SCREW(incl. w/ hand lever) 14X-253 15 ROUND HEAD SCREW 10-248 26 INSPECTION PLATE COVER (1) 10-272 (2) 10-2727-9 GREASE HOSE ASSEMBLY 14X-802 17 GREASE HOSE 14X-228 18 FITTING 10-230 19 FITTING 10-229 110 LOCK WASHER 10-252 111 JAM NUT 10-247 112 FITTING 10-260 113-31 CLUTCH PACK CO1-14A CO2-14A CO3-14A 113-20 SLIDING SLEEVE ASSEMBLY 14X-504 14X-505 113-16 BRASS COLLAR ASSEMBLY 14X-704 113 BRASS COLLAR 14X-126 114 HEX HEAD SCREW 10-244 215 HEX NUT 10-249 216 SHIM 14X-130 217 SLIDING SLEEVE 14X-197 14X-198 118 LEVER LINK 14X-201 819 LEVER LINK PIN 14X-204 820 COTTER PIN 10-263 821 ADJUSTING RING 14X-174 122 ADJUSTING LOCK PIN 14X-187 123 ADJUSTING LOCK PIN SPRING 14X-190 124 LEVER 14X-184 425 LEVER PIN 14X-206 426 SPRING WASHER 14X-267 827 COTTER PIN 14X-265 428 FLOATING PLATE 14X-120 129 DRIVE PLATE (SOLID) (1) 14X-133A (2) 14X-133A (3)14X-133A

DRIVE PLATE (3 PIECE) (1) 14X-133 (2) 14X-133 (3) 14X-13330 CENTER PLATE N/A (1) 14X-122 (2) 14X-12231 HUB & BACK PLATE 14X-115 14X-116 14X-117 132 SHAFT WASHER 14X-169 14X-170 14X-171 133 SHAFT NUT 14X-164 14X-165 14X-166 134 PILOT BEARING * 14X-217 14X-217 14X-220 135 DRIVING RING 14X-152 14X-153 14X-154 136 HEX HEAD SCREW 10-245 137 LOCKWASHER 10-250 138 BEARING RETAINER LOCK 14X-160 139 BEARING RETAINER 14X-157 14X-158 14X-158A 140 SNAP RING 14X-270 N/A 14X-271 141 MAIN BEARING 14X-223 14X-224 242 HUB KEY 14X-238 14X-240 14X-242 143 SHAFT(SOLID) 14X-139 14X-140 14X-141 1

SHAFT (DRILLED) 14X-139A 14X-140A 14X-141A 144 OUTPUT KEY 14X-237 14X-239 14X-241 145 OPERATING SHAFT SAE #0 N/A 14X-148 1

OPERATING SHAFT SAE #1 14X-147 146 WOODRUFF KEY 10-233 247 THROWOUT YOKE 14X-180 148 HEX HEAD SCREW (incl. w/ yoke) 10-246 249 LOCK WASHER (incl. w/ yoke) 10-251 250 FITTING 10-262 251 HEX HEAD SCREW 14X-253 652 LOCK WASHER 14X-255 653 SHAFT (Drilled) 14X-327 154 MAIN BEARING 14X-328 255 SLIDING SLEEVE (3" Bore) 14X-322 156 HUB & BACK PLATE (Small Bore) 14X-116 A 157-61 BALL BEARING SLEEVE ASSEMBLY 14X-514 14X-515 157 SNAP RING(sleeve) 14X-366 158 COLLAR 14X-351 159 BALL BEARING 14X-363 160 SNAP RING (collar) 14X-367 161 SLIDING SLEEVE 14X-360 14X--361 1



1 Plate 14" Model CN1-14-1A2 Plate 14" Limited Attendence Model CN2-14-1A3 Plate 14" Model CN3-14-1A

25

2422

23

21

20

1918

17

16 15

14

9

1011

13 12

9 7

65

457

2

555654

51

53

52

41

40

42

37

38

36

35

34

3332

31

3029

2826

27

3

1

4950

4847

46

4443

45

39

8

15

ITEM NO. DESCRIPTION PART NO. QTY.1 PLATE 14" 2 Plate 14" 3 PLATE 14"CN1-14-1A CN2-14-1A CN3-14-1A

1 HOUSING SAE #0 N/A 14X-105-0 14X-106-0 1HOUSING SAE #1 14X-104-1 14X-105-1 14X-106-1 1

2 BEARING CARRIER 14X-104A 14X-107 14X-108 13 HAND LEVER 14X-215 14 HEX HEAD SCREW(incl. w/ hand lever) 14X-253 15 ROUND HEAD SCREW 10-248 26 INSPECTION PLATE COVER (1)10-272 (2)10-2727-21 CLUTCH PACK CN1-14A CN2-14A CN3-14A 17-10 SLIDING SLEEVE ASSEMBLY 14X-507 14X-508 17 SLIDING SLEEVE 14X-194 14X-195 18 LEVER LINK 14X-201 89 LEVER LINK PIN 14X-204 810 COTTER PIN 10-263 811 ADJUSTING RING 14X-174 112 ADJUSTING LOCK PIN 14X-187 113 ADJUSTING LOCK PIN SPRING 14X-190 114 LEVER 14X-184 415 LEVER PIN 14X-206 416 SPRING WASHER 14X-267 817 COTTER PIN 14X-265 418 FLOATING PLATE 14X-120 119 DRIVE PLATE (SOLID) (1) 14X-133A (2)14X-133A (3)14X-133A

DRIVE PLATE (3 PIECE) (1)14X-133 (2)14X-133 (3)14X-13320 CENTER PLATE N/A (1)14X-122 (2)14X-12221 HUB & BACK PLATE 14X-115 14X-116 14X-117 122 SHAFT WASHER 14X-169 14X-170 14X-171 123 SHAFT NUT 14X-164 14X-165 14X-166 124 PILOT BEARING * 14X-219 14X-219 14X-220 125 DRIVING RING 14X-152 14X-153 14X-154 126 HEX HEAD SCREW 10-245 127 LOCK WASHER 10-250 128 BEARING RETAINER LOCK 14X-160 129 BEARING RETAINER 14X-157 14X-158 14X-158A 130 SNAP RING 14X-270 N/A 14X-271 131 MAIN BEARING 14X-223 14X-224 232 HUB KEY 14X-238 14X-240 14X-242 133 SHAFT (SOLID) 14X-139 14X-140 14X-141 1

SHAFT (DRILLED) 14X-139A 14X-140A 14X-141A 134 OUTPUT KEY 14X-237 14X-239 14X-241 135 OPERATING SHAFT SAE #0 N/A 14X-146 1

OPERATING SHAFT SAE #1 14X-145 136 WOODRUFF KEY 10-233 237 THROWOUT YOKE 14X-178 14X-179 138 HEX HEAD SCREW (incl. w/ yoke) 10-246 239 LOCK WASHER (incl. w/ yoke) 10-251 240 CAMROLL BEARING 14X-226 241 HEX NUT (incl. w/ camroll) 10-249 242 STOP COLLAR 11-213 243-50 LOCATOR ASSEMBLY 11-901 143 NEUTRAL LOCK ARM 11-207 144 HEX HEAD SCREW 10-246 145 SNAP RING 11-268 146 SPRING 11-211 147 ROLLER PIN 11-210 148 DETENT ROLLER 11-209 149 RETAINING RING 11-269 150 HEADED PIN 11-208 151 HEX HEAD SCREW 14X-256 252 DETENT LOCATOR SAE #0 N/A 14X-111 1

DETENT LOCATOR SAE #1 14X-110 153 LOCK WASHER 10-251 254 FITTING 10-262 255 HEX HEAD SCREW 14X-253 656 LOCK WASHER 14X-255 657 FITTING 10-260 1


16

Lightduty

4040.15

5353.05

6463.57

9796.79126

126.05239

236.71204

217.50389

378.13583

557.50

Max. TorqueRecom-mendedlb-ft/kg

17821.91234

26.12282

29.38427

48.50553

65.161090

129.39900

123.391710

235.162565

353.38

LIGHT DUTY

AGITATORS, pure liquids.

BLOWERS, certrifugal, vane.

CONVEYORS, uniformly loaded orfed, all types except reciprocatingand vibrating.

GENERATORS

ELEVATORS, BUCKET, uniformlyloaded or fed, all types.

FEEDERS, disc type.

PUMPS, centrifugal

SCREENS, rotary, uniformly fed.

MACHINES of all types withuniform loads non-reversing.

NORMAL DUTY

AGITATORS, (solids or semi solids).

COMPRESSORS, centrifugal,reciprocating (3 or more cylinders).

CONVEYORS, not uniformly loadedor fed, all types except reciprocat-ing and vibrating.

ELEVATORS, BUCKET, not uni-formly loaded or fed.

FEEDERS, (under bins, hoppersetc.) apron, belt, screw rotaryvane.

HOISTS

KILNS, DRYERS, rotary.

MILLS, ball pebble tube.

PUMPS, reciprocating (3 or morecylinders).

MACHINES of all types with moder-ate pulsating load, non-reversing.

HEAVY DUTY

COMPRESSORS, reciprocating(single or 2 cylinder).

CONVEYORS, reciprocating andvibrating (natural frequency).

CRUSHERS

FEEDERS, reciprocating

MILLS, hammer, rolling.

PAPER MACHINERY, chipperand debarkers.

MACHINES of all types withsevere impact loads or speedvibration and reversing type.

PTOSpecifications

PECPTO

Model#

CO1- 06

C01- 07

C01- 08

C01- 10

CO1-11

CO2-11CN2-11CO1-14CN1-14CO2-14CN2-14CO3-14CN3-14

AvailbleSAE

HousingNumber

4, 5

4, 5

3, 4, 5

2, 3, 4

2, 3

2, 3

1

0, 1

0, 1

Note: shaded areas are metric.

ClutchDia.

ins/mm

6 1/2165.107 1/2

190.508

203.2010

254.011

279.411

279.414

355.614

355.614

355.6

Normalduty

2727.25

3535.06

4343.60

6565.90

8484.69159

155.65136

138.13259

246.43389

351.98

Heavyduty

2020.28

2727.41

3232.24

4949.56

6363.70120

107.88102

102.61195

169.48292

226.60

SolidPlate

3500

3200

3100

3100

2850

2850

2400

2500

2500

SplitPlate

3500

3200

3050

2650

2200

2200

1950

1950

1920

Max. engine H.P./M.H.P.Recommended

Max. safe operatingspeed (RPM)

Approx.Net

Weightlb/kg

5324.00

5524.92

7232.62115

52.10141

63.88155

70.23260

117.80328

148.61408

184.86

17

Approx.Net

Weightlb/kg

2-3/41.25

3-3/81.53

4-1/41.93

73.17

83.62

188.16

16-1/27.48

25-3/411.67

32-5/814.78

E

—

—

—

—

—

—

1/212.7

1/212.7

1/212.7

D

5/815.8

5/815.8

5/815.8

7/822.2

7/822.2

1-7/847.6

1-1/828.6

2-3/860.33

3-3/885.73

C(Nominal)

7177.8

7-13/16198.4

8-1/2215.9

10-1/2266.7

12304.8

12304.8

14-3/4374.6

14-3/4374.6

14-3/4374.6

DRIVING RING DETAILSPEC

DrivingRing

#

6X-325

7X-312

8X-298

10X-149

11X-150

11X-151

14X-152

14X-153

14X-154

DrivingRingType

A

A

A

A

A

A

B

B

B

A

8-1/2215.9

9-1/2241.3

10-3/8263.5

12-3/8314.3

13-7/8352.4

13-7/8352.4

18-3/8466.7

18-3/8466.7

18-3/8466.7

F

—

—

—

—

—

—

16406.4

16406.4

16406.4

No.

6

8

6

8

8

8

8

8

8

Size

21/648.33

21/648.33

13/3210.3

13/3210.3

13/3210.3

13/3210.3

17/3213.5

17/3213.5

17/3213.5

TeethNo.

42

47

51

63

72

72

59

59

59

Holes


B

7-7/8200.0

8-3/4225.4

9-5/8244.5

11-5/8295.3

13-1/8333.4

13-1/8333.4

17-1/4438.1

17-1/4438.1

17-1/4438.1

18

PEC#

6X-099

6X-099A

7X-100

7X-100A

8X-290

8X-290A

10X-131

10X-131A

10X-131B

11X-132

11X-132A

11X-132B

14X-133

14X-133A

14X-134

14X-134A

14X-134B

18X-135

T.D.#

A-3507-E

A-3507-D

A-5436-A

A-5436

6479-S

6479

5878-S

5878

06314-F

A-5579-A

A-5579

06310-L

5659-L

5659-Y

5659-N

5659-M

05499-E

5658-H

OutsideDiameterDim. A

7-1/4

7-1/4

8-1/4

8-1/4

8-3/4

8-3/4

10-3/4

10-3/4

10-3/4

12-1/4

12-1/4

12-1/4

15-5/32

15-5/32

15-5/32

15-5/32

15-5/32

19-1/8

InsideDiameterDim. B

3-5/8

3-5/8

4-1/2

4-1/2

5-1/2

5-1/2

5-1/2

5-1/2

5-1/2

6-1/4

6-1/4

6-1/4

7

7

9-1/4

9-1/4

9-1/4

12-1/2

#Teeth

42

42

47

47

51

51

63

63

63

72

72

72

59

59

59

59

59

75

ThicknessDim.C

7/16

7/16

7/16

7/16

7/16

7/16

7/16

7/16

7/16

7/16

7/16

7/16

5/8

5/8

5/8

5/8

5/8

5/8

#Segments

3

1

3

1

3

1

3

1

1

3

1

1

3

1

3

1

1

3

Drive Ring #

6X-325

6X-325

7X-312

7X-312

8X-298

8X-298

10X-149

10X-149

10X-149

(1) 11X-150(2) 11X-151(1) 11X-150(2) 11X-151(1) 11X-150(2) 11X-151(1) 14X-152(2) 14X-153(3) 14X-154(1) 14X-152(2) 14X-153(3) 14X-154(1) 14X-152(2) 14X-153(3) 14X-154(1) 14X-152(2) 14X-153(3) 14X-154(1) 14X-152(2) 14X-153(3) 14X-154

DRIVE PLATE SPECIFICATIONS

19

HOUSING SPECIFICATIONS

PTO ASSEMBLY DRAWING

INSTALLATION DETAILS

SAEHousingNumber

6

5

4

3

A

10-1/2266.7

12-3/8314.3

14-1/4361.9

16-1/8409.5

S

12-1/8307.9

14355.6

15-7/8403.2

17-3/4450.8

No.

8

8

12

12

TNo.

12

12

16

P

9-3/4247.6

9-3/4247.6

12-3/4323.8

SAEHousingNumber

2

1

0

T

HousingLength

D

5-9/16141.30

5-9/16141.30

7-1/16179.40

7-1/16179.40

7-1/16179.40

8-5/8219.07

9-1/4234.95

9-5/8244.47

12-1/8307.97

13-3/4349.25

14-1/2368.30

Dia.F+0.000-0.001+0.000-0.026

1-7/1636.50

1-7/1636.50

1-7/1636.50

1-7/1636.50

1-3/444.45

2-1/457.15

2-1/457.15

2-1/263.50

376.20

3-1/288.90

3-15/16100.00

Length

E

3-1/288.9

3-1/288.9

3-1/288.9

3-1/288.9

6152.40

5-1/2139.70

6-1/2165.10

6-1/2165.10

8-1/2215.90

10254.00

10254.00

3/8 x 3/169.52 x 4.76

3/8 x 3/169.52 x 4.76

3/8 x 3/169.52 x 4.76

3/8 x 3/169.52 x 4.76

1/2 x 1/412.7 x 6.35

5/8 x 5/1615.87 x 7.94

5/8 x 5/1615.87 x 7.94

5/8 x 5/1615.87 x 7.94

3/4 x 3/819.05 x 9.52

7/8 x 7/1622.22 x 11.11

1 x 1/225.4 x 12.7

Clutchdia.B

6-1/2165.1

7-1/2190.5

6-1/2165.1

7-1/2190.5

8203.20

10254.0

11-3/8288.92

11-3/8288.92

14355.6

14355.6

14355.6

C

2-13/1671.44

2-13/1671.44

2-13/1671.44

2-13/1671.44

3-15/16100.0

3-15/16100.0

3-15/16100.0

3-15/16100.0

3-15/16100.0

3-15/16100.0

3-15/16100.0

H

7/822.22

7/822.22

2-11/3259.53

2-11/3259.53

2-11/3259.53

3-3/495.25

3-3/495.25

376.20

3-7/1687.31

3-3/885.72

3-3/885.72

J

4-1/2114.3

4-1/2114.3

5127.0

5127.0

5127.0

5-3/4146.05

5-3/4146.05

6-1/2165.10

6-21/32169.00

7-1/2190.50

7-1/2190.50

0+0.0000-0.0005+0.0000-0.0125

2.047251.99

2.047251.99

2.047251.99

2.047251.99

2.440961.99

2.834671.99

2.834671.99

2.834671.99

3.149679.99

3.149679.99

3.9370100

Width+0.000-0.005+0.000-0.125

0.585614.87

0.585614.87

0.585614.87

0.585614.87

0.664318.87

1.182530.03

1.182530.03

1.182530.03

1.37034.80

1.37034.80

1.771745

Type

205 SF

205 SF

205 SF

205 SF

305 SF

306 SFFC

306 SFFC

306 SFFC

307 SFFC

307 SFFC

309 SFFC

V

376.20

376.20

376.20

376.20

376.20

376.20

376.20

3-3/495.25

4-1/2114.30

4-1/2114.30

4-1/2114.30

W

2-1/853.97

2-1/853.97

2-1/853.97

2-1/853.97

1-7/847.62

250.80

3-3/1680.96

4-1/16103.20

5-7/16138.11

6-5/8168.27

7-3/4196.85

X

1-5/1633.33

1-5/1633.33

1-5/1633.33

1-5/1633.33

1-1/431.75

1-9/1639.70

1-15/1649.20

250.80

2-9/1665.10

2-7/1661.90

2-1/263.50

Y

1-5/841.27

1-5/841.27

1-5/841.27

1-5/841.27

1-1/238.10

1-13/1646.04

2-3/860.32

2-3/860.32

2-15/1674.60

2-15/1674.60

2-15/1674.60

L

1-3/1630.16

1-3/1630.16

1-3/1630.16

1-3/1630.16

2-7/1660.90

2-1/853.97

1-9/1639.70

1-9/1639.70

125.40

125.40

125.40

HandLeverTravelOC

13°

13°

13°

13°

17°

15°

15-1/2°

15-1/2°

18°

18°

18°

Z

15-3/8390.52

15-3/8390.52

15-3/8390.52

15-3/8390.52

15-3/8390.52

15-3/8390.52

15-3/8390.52

15-3/8390.52

23-3/8593.72

23-3/8593.72

23-3/8593.72

DrivingRing

NumberK

6X-325

7X-312

6X-325

7X-312

8X-298

10X-149

11X-150

11X-151

14X-152

14X-153

14X-154

Shaft Pilot Bearing U

PTOModel

001-06

001-07

CN1-06

CN1-07

C01-08

C01-10

C01-11

C02-11CN2-11

C01-14CN1-14

C02-14CN2-14

C03-14CN3-14

Keyway

G


P

7-3/4196.8

7-3/4196.8

7-3/4196.8

9-3/4247.6

R

11-1/4285.7

13-1/8333.3

15381

16-7/8428.6

Dia.13/3210.3

13/3210.3

13/3210.3

13/3210.3

Dia.

13/3210.3

15/3211.9

17/3213.5

R

18-3/8466.7

20-7/8530.2

26-3/4679.4

S

19-1/4488.9

21-3/4552.4

28711.2

A

17-5/8447.6

20-1/8511.2

25-1/2647.7

20

BEARING INTERCHANGEPEC TWIN DISC NTN SKF TIMKEN MCGILL MRC FAFNIR ND IKO

7X-281 M-177 6308-LL 6308-2RS 308-SZZ 308-NPP Z-99308

7X-282 M-141-A 6205-LL 6205-2RS 205-SZZ 205-KPP Z-99505

7X-326 M-141 6205-Z 6205-Z 205-SF 205-KD 7507

7X-356 NAF25 x 40 x 17

8X-284 M-163-A 6305-LL 6305-2RS 305-SFF 305-KDD Z-99605

8X-285 M-1590 25521/25584 25521/25584 25521/25584

8X-372 5203 LL

10-216 M-224-A 63306LLBC 462306 306-SFFC W-306-PP

10-221 M-207 395/394-A 394A/395 394A/395

10X-277 M-167 6306LL 6306-2RS

10X-278 M-2262-A 63206LL 462206 206-SFFC W-206-PP

10X-331 M-1687 5206CZZ

10X-332 63306ZZ

11X-218 M-2467 RA1562EBL

11X-222 M-2196 3920/3984 3920/3984 3920/3984

11X-225 M-2292 CF-3/4-SB CR-12-UU

11X-330 M-224 5306AZZ

14X-217 M-1985-A 63307LLBC 462307 307-SFFC W-307-PP

14X-219 M-2529 RA1567EBL

14X-220 M-2713 RA1572EBL

14X-223 M-282 563/568 563/568 563/568

14X-224 M-215 592-A/594 592-A/594 592-A/594

14X-226 M-2241 CF-7/8-SB CR-14-UU

14X-328 M-214 592-A/593 592-A/593 592-A/593

14X-334 M-2137 NU2309LLU

14X-336 5207AZZ

14X-337 M-2327 63309LL

21

TWIN DISC PECM2033BE ....................... 10X-231M2033BJ........................ 11X-234M2033BK ....................... 14X-242M2034P ......................... 14X-237M2034AL........................ 14X-239M2034BF........................ 14X-241M2035AB ....................... 14X-238M2035AC ....................... 14X-2402042 ................................ 7X-302M2046L............................ 10-250M2046S ........................... 10-251M2046AF.......................... 10-252M2047AA ....................... 14X-255M2111H ........................... 11-268M2115C ......................... 11X-266M2115D ......................... 14X-2672137 .............................. 10X-191M2137 ........................... 14X-334B2147 .............................. 10-155M2196 ........................... 11X-222M2220 ........................... 11X-362M2241 ........................... 14X-2262245 .............................. 10X-185M2262A ......................... 10X-278A2286 .............................. 7X-310M2292 ........................... 11X-225B2340 ............................ 11X-186B2341 ............................ 14X-187XB2343 ........................ 11X-119AXB2345 ........................ 14X-120A2411 ................................ 7X-300M2467 ........................... 11X-218M2529 ........................... 14X-2192617 .............................. 11X-200A2622A .......................... 14X-366A2622C .......................... 11X-365A2622F .......................... 14X-270A2622K .......................... 14X-341A2622L .......................... 14X-271A2669AM ....................... 11X-364A2669W ......................... 14X-367A2680 .............................. 8X-329A2701BD ........................ 11X-189A2702BE ........................ 14X-190A2704BB .......................... 11-211M2713 ........................... 14X-2202727 ................................ 7X-3142757 .................................. 7-2952815 ................................ 10-2722815X ............................ 11X-2752816 .............................. 14X-274A2888B .......................... 14X-258

TWIN DISC PECH18 ................................ 7X-296AH23 ................................ 6X-324A103F .............................. 10X-182110D3 .............................. 7X-283115 ................................ 10X-188X117 .............................. 11X-702X117B14 ........................ 14X-704X117C8 .......................... 10X-701X117C10 ........................ 11X-703119B2 ............................ 10X-199119B14 .......................... 14X-201120 ................................ 11X-128120C8 ............................ 10X-127X125A ............................ 11X-176M141 ............................... 7X-326M141A ............................. 7X-282M163A ............................. 8X-284M167 ............................. 10X-277M177 ............................... 7X-281M207 ............................... 10-221M214 ............................. 14X-328M215 ............................. 14X-224M224 ............................. 11X-330M224A ............................. 10-216M268 ............................... 10-260M282 ............................. 14X-223M287 ............................... 10-261M303 ............................. 14X-363M503 .............................. 10--262A1002 .............................. 7X-319X1037 ............................ 10X-175A1069 ............................ 10X-2121086 .............................. 14X-1641092 .............................. 11X-1621092A ............................ 10X-1611094C ............................ 14X-1471144E ............................ 11X-1431144F ............................ 10X-1421144X ............................ 14X-1461144Z ............................ 14X-1451144AK .......................... 11X-144A1181 .............................. 7X-3151216 ................................ 10-1591242 ................................ 11-213M1283 ............................. 10-229B1284 ............................ 14X-1841293 .............................. 14X-1301294 .............................. 11X-129B1297D ............................ 11-208B1304 ............................ 11X-183M1332 ........................... 14X-3361382 ................................ 7X-303

PARTS INTERCHANGE

TWIN DISC PECB1430 ............................ 11X-1561442 .............................. 14X-1661473 ................................ 8X-311B1509B .......................... 11X-163B1509T........................... 14X-165B1511E .......................... 11X-168B1511L .......................... 14X-170B1535B ............................ 10-264B1535C ............................ 10-263B1535D .......................... 14X-265B1537A ............................ 7X-301B1537B ............................ 7X-307B1537C ............................ 7X-306B1537D ............................ 10-203B1538A .......................... 11X-205B1538B .......................... 14X-204B1538D .......................... 10X-202B1540A .......................... 14X-2061580A ............................ 14X-148A1587 .............................. 7X-313A1588 .............................. 10-167A1589 ............................ 14X-169A1590 ............................ 14X-171M1590 ............................. 8X-285M1687 ........................... 10X-331M1817 ............................. 11-269B1832A ............................ 11-210B1833A ............................ 11-209M1930F ............................ 10-2491965 ................................ 7X-3161965A .............................. 7X-357A1983 ............................ 14X-160M1985A ......................... 14X-2171990 .............................. 10X-172M2001E............................ 10-245M2001H ......................... 14X-254M2002D ......................... 14X-256M2002G ......................... 14X-259M2002N ......................... 14X-257M2002AG ......................... 10-246M2002BB ......................... 10-244M2004R ........................... 10-243M2004W ........................ 14X-253M2022Z ........................... 10-233M2023F ............................ 10-248M2027AN ......................... 10-247M2032X............................ 7X-317M2032Z ......................... 10X-232M2032BE ....................... 11X-235M2033D ........................... 7X-318M2033X.......................... 11X-236M2033AE ......................... 8X-321

22

TWIN DISC PEC2968 ................................ 7X-3052969 ................................ 7X-304XB3001 .......................... 11X-177B3002 ............................ 11X-193B3003 ............................ 11X-109A3024 .............................. 6X-324XA3026 ............................ 7X-293XA3026AN ...................... 7X-293AXA3026BA ...................... 7X-293BA3050 ............................ 14X-157A3087 .............................. 7X-308A3088 .............................. 7X-296A3169 .............................. 8X-309ZA3177C .......................... 8X-2973206 ................................ 7X-299A3308 .......................... 14X-158AA3308B .......................... 14X-158A3507D .......................... 6X-099AA3507E ............................ 6X-099X3507 ............................ 11X-181X3799 .............................. 10-214A3826 .............................. 8X-294A3826H .......................... 8X-294A3951 ................................ 6X-323A4237 ............................ 11X-192A4238 ............................ 11X-173A4241 ............................ 14X-174A4362A .......................... 11X-349A4422 ............................ 11X-196A4434 ............................ 11X-359A4440A ............................ 11-207A4441A .......................... 14X-110A4441B .......................... 14X-111A4455 ............................ 11X-354A4494 ............................ 11X-350A4507 ............................ 10X-355A4511 ............................ 11X-3414879 .............................. 10X-1364879AU ........................ 10X-136AB5027 .......................... 14X-140AB5027A .......................... 14X-140X5091 ............................ 14X-180

TWIN DISC PECA5188 ............................ 11X-137A5188A ........................ 11X-137BA5188AZ ...................... 11X-137AA5189 ............................ 14X-327A5190 .......................... 14X-139AA5190AO ........................ 14X-139A5190B ........................ 14X-139BA5194 ............................ 14X-108A5195 ............................ 14X-107A5436 ............................ 7X-100AA5436A ............................ 7X-100A5579D ........................ 11X-132AA5579E .......................... 11X-1325658H ............................ 18X-1355658P .......................... 18X-135A5659L ............................ 14X-1335659M ......................... 14X-134A5659N ............................ 14X-1345659Y .......................... 14X-133A5712B ............................ 14X-1525713D ............................ 14X-1535752 .............................. 10X-1185791 .............................. 11X-4185805A .............................. 8X-2985878Q .......................... 10X-131A5878R ............................ 10X-1316030 .............................. 10X-1126158 .............................. 11X-4136187E ............................ 10X-1496479C ............................ 8X-290C6479K ............................ 8X-290A6479L .............................. 8X-290ZA6505A ........................ 11X-113A6506B .......................... 11X-119ZA6511A ........................ 14X-117A6512C .......................... 14X-120A6513 ............................ 14X-122A6514 ............................ 14X-198A6514A .......................... 14X-322A6514B .......................... 14X-197A6515 .......................... 14X-141CA6518A .......................... 14X-154

TWIN DISC PECZA6519A ...................... 14X-116AZA6519E ........................ 14X-116A6603 ............................ 14X-351A6619 .......................... 14X-141AA6619K .......................... 14X-141ZA6620A ........................ 14X-1156625A .......................... 11X-150C6625D ............................ 11X-150A6635 ............................ 14X-361A6635B .......................... 14X-3606661 ................................ 7X-312ZA6684A ........................ 11X-114A6690 ............................ 11X-121A6691 .......................... 11X-138AA6691AC ........................ 11X-138A6691D ........................ 11X-138BA6691K .......................... 14X-141A6709 ............................ 14X-194XA6710 .......................... 14X-178A6821 ............................ 14X-195XA6822 .......................... 14X-1796931 ............................ 11X-151C6931T ............................. 11X-1516939 ................................ 6X-325CL6952 ........................ 10X-131RX7441T ........................... 14X-2157958 ............................. 7X-291-58247 ........................... 11X-102-28251 ........................... 11X-102-18252 ........................... 11X-102-38255 ........................... 10X-101-38424 ........................... 14X-104-18718 ........................... 14X-105-18719E ......................... 14X-105-08879 ........................... 10X-101-49118 ............................. 8X-292-59120 ............................. 8X-292-49121 ............................. 8X-292-39584 ........................... 14X-106-19617A ......................... 14X-106-09682 ........................... 11X-103-29977A ......................... 11X-103-3

NOTES

23

ASSEMBLY INTERCHANGETWIN DISC PEC DESCRIPTIONPART NUMBER PART NUMBER

A16 ............................. 7X-600 ...................... Adjusting Yoke AssemblyA60 ............................. 10X-601 .................... Adjusting Yoke Assembly

XA-4440-A ................... 11-901 ...................... Locator Assembly

A-1663 ........................ 10-801 ...................... Grease Hose AssemblyA-1663-A ..................... 14X-802 .................... Grease Hose Assembly

X117-C8 ...................... 10X-701 .................... Brass Collar AssemblyX117 ........................... 11X-702 .................... Brass Collar AssemblyX117-C10 .................... 11X-703 .................... Brass Collar AssemblyX117-B14 .................... 14X-704 .................... Brass Collar Assembly

S-384 .......................... 10X-501 .................... Sliding Sleeve AssemblyS-387 .......................... 7X-500 ...................... Sliding Sleeve AssemblyS-598 .......................... 14X-505 .................... Sliding Sleeve AssemblyS-600 .......................... 14X-509 .................... Sliding Sleeve AssemblyS-601 .......................... 11X-502 .................... Sliding Sleeve AssemblyS-620 .......................... 14X-504 .................... Sliding Sleeve AssemblyS-630 .......................... 14X-514 .................... Sliding Sleeve AssemblyS-634 .......................... 11X-503 .................... Sliding Sleeve AssemblyS-641 .......................... 14X-507 .................... Sliding Sleeve AssemblyS-644 .......................... 10X-512 .................... Sliding Sleeve AssemblyS-650 .......................... 10X-511 .................... Sliding Sleeve AssemblyS-651 .......................... 11X-510 .................... Sliding Sleeve AssemblyS-670 .......................... 11X-513 .................... Sliding Sleeve AssemblyS-672 .......................... 14X-508 .................... Sliding Sleeve AssemblyS-697 .......................... 14X-515 .................... Sliding Sleeve AssemblyS-704 .......................... 11X-506 .................... Sliding Sleeve Assembly

C-106 .......................... C01-06A .................... Clutch PackC-107 .......................... C01-07A .................... Clutch PackC-108 .......................... C01-08A .................... Clutch PackC-110 .......................... C01-10A .................... Clutch PackC-111 .......................... C1-11A ...................... Clutch PackSP-111 ........................ CO1-11A .................... Clutch PackSP-211 ........................ CO2-11A .................... Clutch PackSP-114 ........................ CO1-14A .................... Clutch PackSP-214 ........................ C02-14A .................... Clutch PackSP-314 ........................ C03-14A .................... Clutch PackSPE-211 ...................... CN2-11A .................... Clutch PackSPE-114 ...................... CN1-14A .................... Clutch PackSPE-214 ...................... CN2-14A .................... Clutch PackSPE-314 ...................... CN3-14A .................... Clutch PackX-9586 ........................ CX2-14A .................... Clutch Pack (small bore)

COMPLETE POWER TAKE OFF ASSEMBLIESTwin Disc Part Number PEC Part Number

C-106-SP5 .............................................. C01-06-5AC-107-SP5 .............................................. C01-07-5AC-108-HP5 .............................................. C01-08-5AC-110-HP4 .............................................. C01-10-4AC-111-HP3 .............................................. C1-11-3ASP-111-HP3 ............................................ C01-11-3ASP-211-HP3 ............................................ C02-11-3ASP-114-P1............................................... C01-14-1ASP-214-P1............................................... C02-14-1ASP-314-P1............................................... C03-14-1ASPE-211-HP3 .......................................... CN2-11-3ASPE-114-P1 ............................................ CN1-14-1ASPE-214-P1 ............................................ CN2-14-1ASPE-314-P1 ............................................ CN3-14-1A

24

Allowable Side-Pull Loads ForPOWER TAKE-OFFS


For determination of actual applied load,the following formula should be used.

L (lbs.) = 126000 x H.P.

x FN x D (inch)

L (Kgs.) = 1430000 x H.P. (Metric)

x F N.D. (mm)

WHERE:L = Actual load applied.N = Shaft speed in RPM.D = Pitch dia. of sheave.F = Load factor.

★ 1.0 for chain or gear drive.★ 1.5 for timing belts.★ 2.5 for all V belts.★ 3.5 for flat belts.

For all the severe shock drives, multiplyabove factors by 2.1 for added safety.

C L

‘X’ DISTANCE, INCHES / MM (See Sketch)PTO RPM

1/25 2/50 3/75 4/100 5/125 6/150 7/175 8/200 9/225

835 625 475C01-06 1000 380 284 215

665 595 475C01-07 2000 302 270 215

585 525 4753000 265 238 215

1075 795 635CN1-06 1000 488 360 288

1075 795 635CN1-07 2000 488 360 288

1075 795 6353000 488 360 288

1495 1110 885 735 630C01-08 1000 680 505 403 334 286

1495 1110 885 735 6302000 680 505 403 334 2861495 1110 885 735 6303000 680 505 403 334 286

2740 2190 1730 1430 1216C01-10 1000 1245 995 786 650 552

2420 2190 1730 1430 12161500 1098 995 786 650 5522230 2070 1730 1430 12162000 1100 940 786 650 5522050 1910 1730 1430 12162600 1013 868 786 650 552

2790 2600 2240 1840 1570C01-11 1000 1268 1182 1018 836 713

2630 2450 2240 1840 15701500 1195 1113 1018 836 7132330 2170 2030 1840 15702000 1059 986 922 836 7132140 1990 1865 1750 15702400 972 904 847 795 713

4540 3395 2710 2255 1930 1690C02-11 1000 2063 1543 1231 1025 877 768

4370 3395 2710 2255 1930 1690CN2-11 1500 1986 1543 1231 1025 877 768

3900 3395 2710 2255 1930 16902000 1772 1543 1231 1025 877 7683550 3330 2710 2255 1930 16902400 1613 1513 1231 1025 877 768

3390 2600 2120 1780 1535 1350 1210 1090C01-14 1000 1540 1181 963 809 697 613 505 495

3390 2600 2120 1780 1535 1350 1210 1090CN1-14 1500 1540 1181 963 809 697 613 505 495

3390 2600 2120 1780 1535 1350 1210 10902000 1540 1181 963 809 697 613 505 4953390 2600 2120 1780 1535 1350 1210 10902200 1540 1181 963 809 697 613 505 495

5980 4700 3880 3290 2870 2540 2270 2060C02-14 1000 2718 2137 1763 1495 1304 1154 1031 936

5980 4700 3880 3290 2870 2540 2270 2060CN2-14 1500 2718 2137 1763 1495 1304 1154 1031 936

5980 4700 3880 3290 2870 2540 2270 20602000 2718 2137 1763 1495 1304 1154 1031 9365980 4700 3880 3290 2870 2540 2270 20602200 2718 2137 1763 1495 1304 1154 1031 936

6170 5120 4200 3570 3100 2740 2460 2220 2035C03-14 1000 2804 2327 1909 1622 1409 1245 1118 1009 925

5350 5120 4200 3570 3100 2740 2460 2220 2035CN3-14 1500 2431 2327 1909 1622 1409 1245 1118 1009 925

5025 4750 4200 3570 3100 2740 2460 2220 2035With 80mm 2000 2284 2159 1909 1622 1409 1245 1118 1009 925Pilot Bearing 4850 4650 4200 3570 3100 2740 2460 2220 20352200 2204 2113 1909 1622 1409 1245 1118 1009 925

6170 5850 5580 4720 4110 3630 3260 2945 2690C03-14 1000 2804 2659 2536 2146 1868 1650 1431 1338 1222

5350 5120 4850 4650 4110 3630 3260 2945 2690CN3-14 1500 2431 2327 2204 2113 1868 1650 1431 1338 1222

5025 4750 4450 4650 4110 3630 3260 2945 2690With 100mm 2000 2284 2159 2022 2113 1868 1650 1431 1338 1222Pilot Bearing 4850 4650 4350 4150 4000 3630 3260 2945 26902200 2204 2113 1977 1886 1818 1650 1431 1338 1222

25

WARRANTY

PEC Manufacturing guarantees all parts and assembled products against defective materials andworkmanship for a period of 1 year or 2000 hours from the date such part or product is put intoservice.

PEC Manufacturing reserves the right to repair, replace or issue credit for any parts or productsfound by PEC to be defective in material or workmanship.

This warranty is void if the part or product failure is found by PEC to be the result of an accident,neglect, abuse or improper installation.

All parts or products for which warranty is claimed, must be returned to PEC Manufacturing withinthe warranty period, with transportation charges prepaid.

This warranty does not provide for labor or other costs incurred by buyer for removal and reinstallationof part or product covered by this warranty. Buyer assumes full responsibility for such labor andother costs.

Buyer agrees to indemnify and hold PEC Manufacturing harmless from and against any loss, liability,damages or expenses resulting from injury to persons or property, without limitation, due to acts oromissions of the buyer, its agents and employees in the installation, use and operation of productsof PEC Manufacturing origin, and shall assert no claim against PEC Manufacturing for consequentialdamages.

PEC Manufacturing reserves the right to improve its products through changes in material or designwithout being obligated to incorporate such changes in products or prior manufacture. Any suchchanges in material or design cannot be used by buyer as proof of insufficiency or inadequacy ofprior material or design.

This written warranty is the only warranty provided by PEC Manufacturing and supersedes all otherwarranties, express or implied.

PEC Manufacturing

pec power take-offs & quality clutch parts · pec power take-offs & quality clutch parts...

Documents