PRE ENGINEERED BUILDINGSWe Don't Just Build, We Create...

PRE ENGINEERED BUILDING

12

3

4

5

67

8

9

In structural engineering, a pre-engineered building (PEB) is designed by a PEB supplier or PEB manufacturer, to be fabricated using best suited inventory of raw materials available from all sources and manufacturing methods that can efficiently satisfy a wide range of structural and aesthetic design requirements.

Introduction - PEB

Pre-Engineered Building (PEB) is a metal building that consists of light gauge metal standing seam roof panels on steel purlins spanning between rigid frames with l ight gauge metal wal l cladding.

Pre-Engineered Buildings are designed and fabricated in the factory premises; shipped to site in CKD (Completely Knocked Down) condition; and all components are assembled and erected at site with nut-bolts, thereby reducing the time of completion.

The concept is designed to provide a complete building envelope system which is energy efficient, optimum in weight and cost and, above all, designed to fit user requirement like a well fitted glove.

Applications of PEB

Houses & Living Shelters

Factories

Warehouses

Sport Halls

Aircraft Hangers

Supermarkets

Workshops

Distribution Centres

Commercial Showrooms

Restaurants

Office Buildings

Labor Camps

Petrol Pumps/Service buildings

Schools

Community Centres

Railway Stations

Equipment Housing/ Shelters

Telecommunication Shelters

"Almost" any low-rise building"

PEB vs Conventional BuildingsPARAMETERS PRE-ENGINEERED BUILDINGS CONVENTIONAL STEEL

BUILDINGS

Design Quick and efficient: since PEBs are mainly formed of standard sections and connections, design time is significantly reduced. Basic designs are used over and over.

Slow: Each conventional steel structure is desinged from scratch by the Consultant, with fewer design aids available to the Engineer.

Delivery Average 6 to 8 weeks Average 20 to 26 weeks

Foundation Simple design, easy to construct and light weight

Extensive, heavy foundations required

Erection Cost & Time

Both costs & time of erection are minimized

The erection process is easy, fast, step by step and with hardly any requirement for equipments.

Typically,20% more expensive than PEB. In most of the cases, the erection costs and time are not estimated accurately.

Erection is slow and extensive field labor is required. Heavy equipment is often needed.

PARAMETERS PRE-ENGINEERED BUILDINGSCONVENTIONAL STEEL

BUILDINGS

Architecture Outstanding architectural design can be achieved at low cost using standard architectural features and interface details.

Special architectural design and features must be developed for each project, which often require research and thus resulting in much higher costs.

Future Expansion

PEB Building are designed with future expansion in mind. It is simple, easy and cost effective. One supplier can co-ordinate changes.

Future expansion would be more difficult and, more likely, costlier.

ResponsibilitySingle responsibility for design, supply and even erection of PEBs.

Multiple responsibilities can result in questions of who is responsible when components do not fit properly

PEB vs Conventional Buildings

Major Components & Accessories of PEB

COMPONENTS ACCESSORIES

Main framing or vertical columns FRP

End wall framing Turbo vent

Purlins, girts and eave struts Ridge vent

Sheeting and insulation or prefab panels Roof curb

Crane system Wire-mesh/PVC fiber mesh

Mezzanine system Insulation

Bracing system Louvers

Paints & finishes Sealents & fasteners

Advantages of PEB

Increased speed of construction, quicker return on investment

Ensured quality of material, design and construction

Unlimited architectural possibilities

Enhanced durability and seismic reliability

Easy construction, maintenance and refurbishing

Increased lifecycle performance and cost competitiveness

Environment friendly structures

Sustainability in construction through reuse of most materials

Suitability for Hilly regions & other geographically different areas

Advantages of PEB

Better Earthquake & wind pressure resistant

The building can be dismantled and relocated easily

Future extensions, expansion modifications can be easily accommodated without much hassle

Faster delivery and erection, saving upto 30-40% of project time

RICHA INDUSTRIES LIMITEDA leading Construction & Engineering company operational in

Pre-Engineered Building, Structural Steel, Turnkey solutions and Textile sectors.

Mahalaxmi TMT

ACCIL

SOMA

Why Richa Industries▐ Started its PEB division in 2008, Richa Industries has created an exclusive niche for itself in

the PEB industry with the excellent support of its well qualified and experienced team.

▐ Richa is committed to Design, Manufacture and Install Pre-Engineered Steel Buildings, which are 100% custom built and designed in accordance with sound principle of Engineering using Computer aided designing.

▐ We offer hi-tech solutions to our customers by utilizing MBS (Metal Building Software), Staad Pro (3D Structural analysis and design software) and Tekla (Model-based software) with highest precision to meet the structural requirements of the Pre-Engineered Steel Building Systems.

▐ Richa deputes qualified experienced safety inspectors to ensure complete project safety and provide good after sales service to its customers.

▐ Richa Industries has been able to supply around 300 buildings and is currently working on more than 100 projects.

▐ The company has presence in more than 120 cities across India with Sales office in more than 8 cities enriched with government as well as private clients.

▐ An ISO 9001:2008 certified company, Richa Industries is listed at Bombay Stock Exchange.

USPs Richa Industries

Richa is the only company

offering galvanized Flange brace angles,Sag rods and Streps

Richa provide galvanized (275 GSM) Secondary members

which enhance the life of Purlins and provide

maintenance free solutions

Richa offers galvanized Anchor

boalts (36 dia)

Our Resources

•Extensive knowledge base , high profile team of Design Engineers, Drafting team and Quantity Surveyor, equipped to provide end to end design and engineering solutions for PEBs irrespective of any extent of Engineering complexities.

•All work in design office is closely reviewed, cross checked and verified to meet customer requirements.

•Design and drawing outputs are verified in compliance with Design codes and regulatory requirement. The system is wholly computerized.

Richa has a dedicated R&Dteam which always ensures:

•The latest engineering development and code upgrades are followed.

•High quality raw materials used.

•Efficient procedures and systems are in place to provide quick response to customers.

PEB Manufacturing Plant

(8th Km Stone, Ram Nagar Road, Disst. Udham Singh Nagar, NH-121, Kashipur-244713, Uttarakhand - India)

KASHIPUR PLANT

The fully operational state-of-the art PEB manufacturing unit in Kashipur, Uttarakhand is spread over the area of approximate 3,50,000 square feet and has a manufacturing capacity of ~72,000 MT annually (Pro-rata basis). The Plant is equipped with latest range of machineries for the production of premium quality Structural Steel buildings.

LANDMARK PEB PROJECTS

BY RICHA INDUSTRIES LIMITED

Manufacturer of one of the highest PEB building in Gujarat and India

Richa Industries Limited has developed a Silica Processing plant for Madhu Silica Pvt. Limited in Bhavnagar, Gujarat. It is one of the tallest Multistorey PEB structure in India with approximate 36 meters of height.

Madhu Silica Pvt. Ltd. Silica Processing Plant

Biggest Clear Span Building

NRB Industrial Building

Area 7000 Sqmt

Type Biggest clear span (54m)

Location Aurangabad

Special Feature

Biggest clear span building with mezzanine & Fascia.

Project Value 5.0 Cr.

Highest Capacity Crane Building

Crompton Greaves Industrial Building

Area 9300 Sqmt

Type Multi Span with Lean To

Location Bhopal, (MP)

Special Feature

Nos. Of heavy cranes (Max 80MT)

Various types of cranes are there like EOT,Monorail, Wall mounted crane, underslung crane etc.

Project Value 8.0 Cr.

Biggest Single Warehouse

Sumeet Developers Warehouse

Area 38500 Sqmt

Type Biggest Single Warehouse

Location Bhiwandi, Maharashtra

Special Feature 202m width (Multi span) with 4.5m reversed canopy at both end wall.

Project Value 8.2 Cr.

Multistorey OfficeMultistorey Office Building

Richa Industries Corporate Office

Area 2000 Sqmt

Type G+5 (Mezzanine)

Location Faridabad

Special Feature Multi floor office building in Steel.

Project Value 6.0 Cr.

SANDEN

Our ClienteleLarsen

& Toubro

DMRC

Lafarge

Essar Steel

Magadh

Crompton Greaves

Sunflame

Indiabulls

Wipro

BHEL

BSWC

Hero Motors

ACCIL

Apeejay Surrendra

Mahalaxmi TMT

Richa has prestigious clients across the Nation which include government as well as private sector clients. Richa's client list represents the foremost client name in their respective industry/organization.

NRB

Lohia

Management TeamMr. Sushil Gupta (Chairman)An IIT engineer by profession, Mr. Sushil Gupta is the Chairman & Managing Director of the company. With an experience of more than 25 years in the industry, Mr. Gupta has been the driving force behind the Company ’s evolution.His core area of focus remains on R&D, cost effectiveness and New Developments.

Dr. Sandeep Gupta (Jt.MD)Dr. Sandeep Gupta is the Joint Managing Director of the company. With more than 14 years of experience in the industry, he has left no stone unturned in taking the organization to the zenith of success. Highly motivated and results-driven professional, Dr. Gupta focuses on developing and maintaining the corporate strategies, expansion & growth plans of the company, resource mobilization and Finance, Marketing and HR initiatives of Richa Industries Limited.

Mr. Manish Gupta (Director)Mr. Manish Gupta is the Director of the Company. Striving towards economic, environmental and social progression of the organization and the society on the whole, Mr. Manish Gupta firmly believes in the principles of respect, rigor and involvement. Mr. Gupta is the leading light in product development and innovation insuring quality at all levels of operations.

Awards & RecognitionRicha Industries has been awarded as "Best Promising Pre-Engineering Steel Building Manufacturer from India" by Indian Achievers Podium in their 10th All India Excellence Award & 6th Realty award

RICHA INDUSTRIES LIMITED

Richa Industries has received Second Runner up award in the "Emerging India Awards" at London in 2008 organized by ICICI Bank & CNBC TV 18

Certificate of achievement "Innovation in Structural Engineering" presented to Richa Industries in recognition of the achievement as a Nominee in the 2013 BE INSPIRED AWARDS by Bentley

The Second Annual Inc. India 500 awards

presented to Richa Industries in

recognition of exemplary growth

and sustainable success

Contact us

CORPORATE CUM REGISTERED OFFICE :

Plot No 29, DLF Industrial Area, PH-IIFaridabad -121003, Haryana

Ph: +91-129-4009262 Fax: +91-129-4133969Email : richa@richa.in

MANUFACTURING PLANT : 8th Km Stone, Ram Nagar Road ,

Distt Udham Singh Nagar, NH-121, Kashipur-244713,

Uttarakhand Ph: +91-9547-223073

Email : kashipur@richa.in

For all the latest updates, follow us on http://richaindustries.wordpress.com/

Thank you for your valuable time !