peak date - pinnacle architectural lighting 2013 website/spec... · photometrics peak / si mount....
TRANSCRIPT
L U M I N A I R E S P E C I F I C A T I O N
P__- CF__- SI- ___- w- __1_-
Specifications and dimensions subject to change without notice. Specification sheets that appear on pinnacle-ltg.com are the most recent version and supersede all other previously printed or electronic versions.
HOUSING LAMPS / LENGTH MOUNTING VOLTAGE CIRCUITING FINISH OPTIONS
Compact Fluorescent Semi-Recessed, Ceiling Mount
Project Name
TypeCatalog Number
DatePEAK
Baffle2
Visor2B-V-
CF26-CF32-CF42-
(1) 26W CFL(1) 32W CFL(1) 42W CFL
Matte White
W-
1Some Peak configurations will not accommodate all electrical options. Consult factory. 2Color will match housing unless otherwise specified.
120 V277 VUNV (120/277)
120-277-UNV-
LAMP LENGTH
12”12”12”
1C-1D-1B-
Single CircuitSingle Circuit with Dimming1
Single Circuit with Battery Pack1
Sample Catalog #: PS-CF26-SI-120-1C-W-V
SI- Ceiling Semi-Recessed, Integral Ballast
PS- Peak indoor luminaire, Smooth Housing, dry/damp labelPR- Peak indoor luminaire, Ribbed Housing, dry/damp label
INTEGRAL BALLAST
4-11/16"
2-3/4"
5-15/16"
(1) 26W CFL(1) 32W CFL(1) 42W CFL
12"
13-5/8"
CONSTRUCTION Extruded aluminum housing, die-cast gasketed end caps. Luminaire head mechanically attaches to cold rolled steel recessed box in one of four adjustable positions.
REFLECTOR Highly reflective specular anodized aluminum.
FINISH Standard powder-coat white textured painted finish. Consult factory for custom color and finish.
LABELS UL and cUL Listed and approved for dry/damp location.
LENS Micro-prismatic tempered glass and die-formed aluminum trim (spring secured) for toolless lamp access.
MOUNTING Fully rotatable head mounts to structure at ceiling.
ELECTRICAL Standard 120/277 volt integral electronic ballast with a power factor greater than 90% and less than 15% THD. Consult factory for battery packs and dimming. Each ballast provided with disconnects to meet luminaire disconnect code requirement.
®
Designed and Fabricated in Denver ColoradoPhone 303.322.5570 www.pinnacle-ltg.com
© 2012 Pinnacle Architectural Lighting ® April 2012
YEARWARRANTY
ConvertibleLED
ConvertibleLFL
LFL LED
YEARWARRANTY
ConvertibleLED
ConvertibleLFL
LFL LED
P H O T O M E T R I C S P E A K / S I M O U N T
Application: External Baffle controls glare and reduces light output by 15%. Recommended when lengthwise shielding of lamp is required.
Ordering Information: Indicate “B” in the Options section of the part number. (Sample Catalog #: PS-CF32-SI-120-1C-W-B).
41°
1"
Ordering Information: Indicate a “V” in the Options section of the part number. (Sample Catalog #: PS-CF32-SI-120-1C-W-V)
Application: Provides 30 degrees of shielding with no interference to peak beam angle. Recommended when glare from the lens or reflector must be shielded.
30°
5-13/16"
Construction: Straight baffles are high reflective white painted aluminum blades. Blade height is 1-1/8” and spaced 1” on center. Baffles are factory installed and can be easily removed for lamp replacement.
Construction: Solid formed visor mounts to fixture with 2 screws. Visors are field installed. Visors are painted to match fixture housing unless otherwise specified.
Test # 18949Catalog # PS-CF26Total Luminaire Efficiency = 52.70%
356
267
178
89
®
Fixture achieves optimal beam angle (a) when "aiming notch" (b) aligns with horizontal or vertical axis. Luminaire head rotates and locks for easy field adjustability.
To light the wall To light the ceiling
25a
b25
a
b
EXTERNAL BAFFLE VISOR
AIMING
Specifications and dimensions subject to change without notice. Specification sheets that appear on pinnacle-ltg.com are the most recent version and supersede all other previously printed or electronic versions.
Designed and Fabricated in Denver ColoradoPhone 303.322.5570 www.pinnacle-ltg.com
© 2012 Pinnacle Architectural Lighting ® April 2012