omc-dt, microset dual tech - amazon s3 · the microset dual tech sensor’s combination of...
TRANSCRIPT
PIRActivated
UltrasonicActivated
MicroSet
Occupancy Sensors- Ceiling Mount
www.coopercontrol.com 203 Cooper Circle P: 800-553-3879Peachtree City, GA 30269 F: 800-954-7016
Ordering
Catalog # Recommended Room Size Field of View Features
OMC-DT-0701-R
OMC-DT-2000-R
300 - 700 sq.ft.
700 - 2,000 sq.ft.
One Way (180°)
Two Way (360°)
w/BAS Relay
w/BAS Relay
The MicroSet Dual Tech sensor’s combination of Ultrasonic and PassiveInfrared technologies offers the most complete sensing equipment availabletoday. This pairing helps eliminate false activations or deactivations foradditional energy savings. The OMC-DT sensors are also equipped withMicroSet technology which provides a revolutionary adaptive and airflowtolerant technology, making them ideal for spaces which have increased airflowdue to higher occupant levels. MicroSet Dual Tech sensors drastically simplifyand reduce a contractor’s installation and adjustment time period. These self-adapting, dual technology sensors truly offer some of the most advancedtechnology available.
Sensors will automatically reset time delay to 10-minute default when left at installer setting
Microprocessor-based Airflow Tolerant Technologyfeatures patented rate of change technology
offices
conference rooms
storage areas
common areas
hallways
other indoor officespaces
Technology
Overview
Ultrasonic & Infrared sensing
The MicroSet technology continuously monitors multiple sub-frequencies in theevent that if a continuous Doppler shift occurs, such as those created byairflow from an air duct, the sensor will identify the noise as continuous andthen block it out of view at a select sub-frequency. It will continue to monitorother sub-frequencies for human motion. This avoids a false-activation, whilestill maintaining the high level of sensitivity that is necessary for sensing minormotion in a changing environment. Separate concurrent time delays for bothPassive Infrared and Ultrasonic technologies avoid false activations ordeactivations. The MicroSet Dual Tech sensor is also equipped with ourexclusive Energy Saver Mode, specifically designed for classrooms with 2 levellighting, which can be selected by a DIP Switch, ensures that when anoccupant enters the room only one zone of lamps will turn ON (typically thosefarthest away from the windows). In order to switch the other lamps ON youuse a low voltage switch on the wall that is connected to the sensor. Theswitch (Greengate model# AML switch) allows the user to toggle between thevarious settings and allows an override to OFF.
Applications
Catalog #
Project
Comments
Prepared by
Type
Date
OMC-DT, MicroSet Dual Tech
• Exclusive Energy Saver Mode
• Complete no-gap coverage
• Self adjustable delay of 10 minutes to30 minutes
• BAS compatible
• Manual ON/OFF feature when wired to anormally open momentary pushbutton (Greengate Model# AML Switch)
• NEMA WD7 Guide robotic method utilized to verify coverage patterns
Specifications:Technology: Passive Infrared (PIR) and Ultrasonic (US) Power Requirements:10-30 VDC from Greengate Switchpack or Greengatesystem. Maximum current needed is 25mA per sensor.Output:• Open collector output to switch up to ten Greengate Switchpacks. • Isolated Form C Relay in (-R) models.• Isolated Form C Relay Ratings: 1A 30 VDC/VAC
Time Delays: Self-adjustable from 10 min. to 30 min.Available Frequencies: 32 kHzOperating Environment: • Temperature: 60°F - 80°F (15°C - 26°C)• Relative humidity: Less than 95%, non-condensing• For indoor use only
Housing: Medium impact injection molded housing.ABS resin complies with UL 94V0. Paintable off-white.Size: 1-5/12”H x 3-3/4”W x 6-1/12”D
(37mm x 100mm x 154mm)LED lamp: Green LED for Ultrasonic
Red LED for Passive InfraredWireguard: ACWG-DTWarranty: Five year
UL Listed
www.coopercontrol.com203 Cooper Circle, Peachtree City, GA 30269
P: 800-553-3879 F: 800-954-7016
Cooper Controls, Greengate, Novitas, Yes Box, PCI Lighting Control Systems, VisionTouch, VisionSwitch,MicroSet, Digita, ControlKeeper, LiteKeeper, DMX Keeper, AnalogKeeper, TracKeeper, IntelliRelay arevaluable trademarks of Cooper Industries in the U.S and other countries. You are not permitted to useCooper Trademarks without the prior written consent of Cooper Industries.
ACC080171
OMC-DT, MicroSet Dual TechWiring Diagrams
OMC-DT-2000-R700 - 2,000 sq. ft.
OMC-DT-0701-R 300 - 700 sq. ft.
Coverage
Mounting
Factory Default Settings are:
1 - Auto ON /Manual ON
2 - Lighting Sweep Off /ON
3 - Self-Adjust /30 Minute Lock
4 - Normal /Energy Saver
5 - Not Used
6 - Normal /Low Sensitivity
7 - Either Mode /Both Mode
8 - Manual Override OFF /ON
DIP SWITCH SETTINGS
CLASS ROOM – ENERGY SAVER OPTION/DUAL LEVEL OPERATION
Maximum Mounting Height-12ft.
(Use GMDS Switch Only in Single Sensor Applications)
(Use GMDS Switch Only in Single Sensor Applications)