Global ExcellenceLNG/FPSO Services

Project DeliverySafety • Performance • Quality

Oil & Gas

Harris Pye offers clients in the oil & gassector unique and innovative solutions,whilst still upholding exceptional performance,quality and safety levels.

Harris Pye offers in-situ repair, upgrade and conversion of rigs,semisubmersibles, trading tankers, FSU, FSO, FPSO and FSRU units, andinspection and consulting services for the LNG industry. Our state- of-the-art, in-house facilities enable us to provide comprehensive overhaul,conversion and refurbishment services. Our expertise includesautomation and control engineering; electrical work, construction steelworks, high and low-pressure pipework, specialist welding, heattreatment and mechanical works, including pumps and compressors,HVAC, accommodation modules and outfitting. We were involved inpioneering projects in the 1980s, when FPSOs and FSOs were stillexperimental. We made key contributions to developing the safe use ofdual fuel for boilers, as well as safe and practical application andinstallation methods. We have been involved in more than 45% of theworld's FPSOs from conversions to new builds.

Our underlying strengths

Quality• Compliance with all major

classification societies and clientrequirements

• API accredited• ISO 9001:2008• ASME ‘R’, ‘U’ and ‘S’ accreditation at

our Sharjah, Kingdom of Saudi Arabiaand Singapore facilities

Safety• BS OHSAS 18001:2007• Full liability cover• Full risk analysis

Environmental• ISO 14001:2004• Managed internal recycling

programmes• Environmentally friendly materials are

used wherever possible, from marinecoatings to stationery

• Green technology: the supply,installation and maintenance ofenvironmentally friendly systems andequipment, e.g. ballast watertreatment, exhaust gas scrubbing,low sulphur technology

Page 4 Harris Pye

Engineering DesignEngineering design is a series of stepswhich leads towards a complete solution.The lifecycle of a project is usuallyinitiated by a conceptual design or designrequirement. This process can then bebrainstormed and a preliminary feasibilityof the ideas and designs can be collated.This may consist of preliminary sketches,analytical decisions on the materials,construction, installation, manufacturingand fabrication process, maintenance,financial feasibility and the timescale ofthe project.

Once the plans have beenfinalised, the review processis required to investigate theenvironmental impact andefficiency of the design.

Design ProcessAll designs will be to a regulatory code orstandard, which outline the minimumrequirements for a particular region orarea. The codes and standards alsoprovide the analysis procedures requiredfor different types of structures. Thepurpose of these regulatory codes orstandards are to ensure a safe design lifefor the intended purpose of thestructure/building, in all eventualities.

Project PlanningDuring planning, we detail all stages ofthe project timescale, design andanalysis, construction/installation andmaintenance.

Project ExecutionHarris Pye offers a full turnkey solutionfor all client’s projects if required.

We can handle everything from the initialclient enquiry and on-site survey, throughto detailed design engineering, on-siteinstallation and final commissioning. Asenior project engineer is available 24/7and is able to mobilise at any time. HarrisPye ensures after sales support for allprojects undertaken.

Structural SteelHarris Pye is a key player in the provisionof marine and offshore structuralsteelwork, with our own in-house design,engineering, fabrication, installation andquality departments. This allows us toprovide full turnkey project packages toclients.

We have our own (class approved)welding and fabrication procedures,which eliminates the need for anyadditional costs to our clients.

With a vast range of the latesttechnology (including our own 3D LaserScanner and stress analysis software) wecan provide a second to none stress andalignment analysis service.

We offer the highest qualityand grades of materials toensure we meet therequirements of our clientsand also classification societyapproval.

Products supplied include:• Hull plates• Stiffeners• Foundation steelwork• Platforms

The fabrication workshop located in southWales is 98m x 46m, with two overheadgantries providing a 30 tonne liftingcapacity with 5m of head room. The sameworkshop has large roller shutter doors ateither end allowing for materials to enterthe workshop via the material controldepartment and straight in to the cutting

The welding section has an Armcocolumn and boom submerged arc-welding machine that can competentlyweld 4.5m in diameter, over a 6m trackwith roll manipulators. Our manualwelding capabilities are extensive, withhundreds of coded welders and weldingprocedures.

In the Group’s UK workshop there arelarge areas of floor space which can beutilised for laying out and for fabricationassembly.

In addition to this, we have our own in-house blasting bay and separatetemperature controlled paint bay. Withinour main workshop, we have segregatedstainless steel pipework and fabricationshops.

section. From this section it movesthrough to the workshop and finallyundergoes stringent inspections underthe QA department’s strict standards.

The cutting section has a guillotine withthe ability to cut 20mm plate over a 3mlength. It also has a CNC plasma andflame cutting facility, capable of cutting100mm thick plate on a 2m x 4m bed.

Within the rolling department, there aretwo sets of plate rolls able to roll from5mm up to 65mm thickness over a 3mwidth, and able to pre-bend 55mm plate.There is also a section roll able to rollpipes up to 6 inches schedule 80.

We have two Pedrazzoli tube bendingmachines, with the capacity to bend to amaximum of 76mm OD X 6mm wall, aswell as various tube reshaping andpressing machines.

Oil & Gas

Page 6 Harris Pye

PipeworkHarris Pye offers clients a full design andinstallation service for pipework and highpressure pipe line systems. Pipeworksystems for cooling water, hydrauliccontrol systems, fire fighting systems,etc. are offered in a wide range ofspecialist materials such as:• Ferrous• Non-ferrous tubing, pipes and fittings• Cryogenic• PVC• GRP• Hydraulic• Stainless steel pipes and fittings

The full design service includes initialsurvey; production of drawings for Classapproval by way of a full CAD system; andpreparation of a full scope of work andspecification of materials. The design,supply and installation process is carriedout in full accordance with Harris Pye’sISO 9001:2008 Quality Assurance system.This system ensures full traceability of allaspects of a particular project.

Electrical SwitchgearMaintenance and servicing of marinecontrol and instrumentation is the coreactivity of Harris Pye. Our engineers havea wealth of experience in pneumatic andelectronic control systems in marine andland-based industries. We can offerservice and repairs to all types of controlequipment.

The servicing of high voltage electricalequipment and switchboards is of aspecialised nature. The competence ofour engineering staff means that we canundertake a wide scope of works,including:• Switchboard surveys• Thermographic imaging• Servicing / calibration of protection

devices• Servicing of breakers / current

injection testing• Design, installation and

commissioning of new or retrofitsystems

Instrumentation Services• Inert gas control systems• Process pressure / temperature / level

/ viscosity control systems• Cargo handling control systems• Fixed and portable tank gauging and

monitoring systems• Fire and safety system servicing and

certification• Service, repair, calibration and

certification of fixed and portable gasdetection equipment

Harris Pye's Electrical and Instrumentationdepartment has a team of experiencedengineers, with the ability to design,build, install, commission and maintainelectrical and instrumentation controlsystems. We work for the marine, oil andgas, petrochemical and power industriesin the following areas:• Boiler combustion control, burner

management and feedwater controlsystems

• Alarm, monitoring and dataacquisition systems

Oil & Gas

Page 8 Harris Pye

Repair and ConversionHarris Pye has more than three decadesof experience in all areas of ship repairsand conversions. Our expertise coverseverything from repainting to fullmechanical servicing - including engineoverhaul and reconditioning, in-situmachining, propeller servicing andrenewal. We also offer outfitting - softfurnishings, accommodation modules,refrigeration, HVAC, insulation, galley andstainless steel design, manufacturing andinstallation.

Services• Engine overhaul• In-situ machining• Propeller service• Outfitting and Accommodation• Galley and stainless steel design• Galley and stainless steel

manufacturing• Galley and stainless steel installations• Ballast water treatment• Exhaust gas scrubbing• Low sulphur technology• Boiler repairs, service, surveys, testing• Boiler troubleshooting and repair• Deck boilers• Electrical switchgear• Instrumentation and control• Pipework• Riding squads and yard services

ProtectiveCoatingsProtective coatings for tube plateprotection are 100% solid polymericepoxies, formulated to cope withconditions such as abrasion, corrosion,contamination and galvanic action.

FPSO and FSO ConversionWe ensure that all stages ofprogramming and worksundertaken are subject to,and comply with, the latestClass, USCG and QualityAssurance regulations and areguaranteed accordingly.

All aspects of conversions are offered,including, but not limited to: remedialboiler works, installation of multi-fuelsystem burners and all associated servicelines - especially gas and crude oil supplysystems. All mechanical, control,electrical and automation aspects arecovered to complete conversions on aturnkey basis.

On-station repairs and inspections can becarried out during production, savingvaluable time and money.

Harris Pye has major experience withFPSO and FSO conversions.• We were involved in pioneer projects

when FPSOs and FSOs were still atthe experimental stage in the 1980s

• We made key contributions todeveloping the safe use of dual fuelfor boilers, as well as safe andpractical application and installationmethods

• We have been involved in more than45% of the world’s FPSOs, fromconversions to new builds

• There are currently 90 FPSO’s inoperation globally - we have beeninvolved in over 40 of them

Through all stages of conversion, fromconception to final commissioning, ourhighly experienced and dedicatedcontract engineering teams obtainrelevant approval, and undertake alldesign work, calculations, fabrication,installation and commissioning.

Oil & Gas

Page 10 Harris Pye

Boiler Surveys andInspectionOur team of highly qualified andexperienced personnel offer a full andcomprehensive worldwide inspection andreporting service for industrial and marineboiler plants, turbines, steam chests andvalves using state-of-the-art inspectionequipment and procedures.

BoilersFibre Optic InspectionsApart from normal visual inspection,internal tube inspections are carried outusing fibre optic equipment, which isfitted with a video copy processor capableof recording and printing any framedisplayed on the screen.

NDT ProceduresThe inspection process can includevarious NDT procedures such as:• Magnetic particle inspection• Ultrasonic thickness gauging• Hardness testing• Tensile testing• Replica grain analysis

Reports and InspectionsThe reports generated from inspectionscan form the basis of repair specificationsused for classification and underwritingrequirements, or form a database forfuture condition monitoring. Generalmarine plant can be surveyed using thefollowing:• Optical alignment• Vibration analysis• Thermographic analysis• Analysis of lube oil

Boiler Troubleshootingand ModellingBy adopting a scientific approach totroubleshooting, we are able to resolveeven the most complex and exclusiveissues, including efficiency improvementand redesign whilst still maintaining aremarkably high success rate.

Our boiler performancecomputer modelling facilityenables us to set up asimulated model of a boilerand assess an infinite numberof operating variables.

The effect of major changes in theheating surface or boiler geometry can beassessed in a matter of minutes, makingour equipment an extremely powerfulproblem solving tool.

Boiler Design, TenderPreparation, Contractand Site AdministrationWe are specialist boiler designers,constructors and problem solvers. Ourteam has built and designed boilers forsome of the largest boiler companies inthe world including B&W, NEI and ICAL.Many of the problems inherent in a boilerplant are caused by errors of judgementand short cuts taken in the originaldesign of the boiler. By correctlyspecifying the equipment from theoutset we can prevent such problemsfrom occurring. In addition, ourindependent assessment of the plant canidentify design flaws, which can berectified prior to the boiler coming on-line.

If you are planning on purchasing a newboiler we are happy to liaise with you atall stages of the boiler construction. Wecan either design and build your newboiler from scratch or operateindependently in the supervision of itsdesign and construction.

This would include the following stages• Tender preparation• Design appraisal and assessment• Contract and site supervision• Commissioning of the plant• Personnel training• Ongoing support

include - but are not limited to - thermaldesign and associated activities, skid andmodule design and layout, includingstress analysis, as well as navalarchitecture requirements.

Harris Pye will be responsible for allaspects of design engineering,manufacture, installation andcommissioning, including aftercare of theboilers and all associated module plantand equipment.

All boilers are designed andmanufactured in accordance with ASMEand BPVC codes.

The boilers and associated equipment areavailable either fully assembled or in flatpack form from the Harris Pyemanufacturing facilities in the UK, China,UAE, Singapore or Brazil, to service theemerging FPSO markets in these regions.

Boiler Circulation AnalysisGlobally, we are the only steam engineerswho can independently assess theinternal water circulation of any sub-critical boiler.

Our computer based circulation modellingfacility has been extensively field tested,with both conventional primary elementflow measurement equipment, andradioactive tracer techniques carried outby the Australian Atomic EnergyCommission.

Harris Pye Steam BoilersThese boilers, which are intendedprimarily for use on marine installations,can easily be adapted and modified foruse in any number of applications wherethere is a requirement for power and / orprocess steam.

Each boiler package will be custom-designed to meet the requirements ofindividual customers. We can undertakeall aspects of the design in-house. These

Oil & Gas

Page 12 Harris Pye

The 'H' design reduces draft loss andallows straight-through flow of gas overthe unit. Both of these factors facilitate aself-cleaning effect, which greatlyreduces fouling and the potential fordamaging and sometimes catastrophicsoot fires. The compact design of theseunits can realise a 50% saving in spacecompared to plain tube designs. This isanother important consideration in theever increasing necessity for space andweight savings.

At Harris Pye we place themost stringent qualityrequirements on our productsand services.

Our highly skilled and experiencedengineers ensure that all stages ofprogramming and works undertakencomply with all of the latest class andquality assurance regulations. Ourservices are guaranteed accordingly.Together with our promise of 24-7worldwide service, this means ourcustomers are confident that they cancompletely rely on Harris Pye in allsituations.

Extended Heating SurfacesHarris Pye offers comprehensive designand manufacturing facilities for both plaintube and extended surface exhaust gaseconomiser assemblies. Extended surfaceconfigurations include single and double'H' gilled, spiral wound and pin type tubes.

Helical Solid FinHelical solid fin tube is produced onstate-of-the-art, high frequency spiral fintube welding machines. Tube sizes rangefrom 25 mm to 115 mm OD and can befound with a range of fin heights from10-25 mm on varying pitches. This coversvirtually all configurations found inmarine service today.

'H' FINPairs of parallel shaped steel fins areresistance welded to the single pressuretube surface under carefully controlledconditions. The purpose built weldingmachine ensures precision indexing alongthe entire length of the tube and exactparallel attachment.

Steel 'H' fin was introduced in the 1950sdue to the requirement for reliability indirty and potentially corrosiveenvironments, specifically associatedwith waste heat units fitted to theuptakes of large diesel engines. Withdeteriorating fuel quality, this isparticularly crucial to the marine industry.

HP Economiser RangeThe 'HP' Economiser range is specificallydesigned to recover the waste heat inboiler exhaust gases, and to transfer asmuch energy as possible to the incomingboiler feed water stream by pre-heatingthe water before it enters the boiler.The design and construction of the HPEconomiser lends itself to installationinto most boiler exhaust gas outlet ducts.HP high efficiency tube banks arepurpose-designed units, constructedfrom selected finned steel tubing,manufactured on Harris Pye's ownspecialised, in-house 'Spiral' and 'H' typetube finning machines.

HP Economisers are designed andconstructed under strict QualityAssurance to meet the highestinternational standards. They can becomprised of standard carbon steel orhigh corrosion resistant materialsallowing for the highest possible heatrecovery with the longest life expectancy.This enables the continued minimisationof your energy costs.

Installation of an HP Economiser providesmany advantages:• Reduced energy costs• For each percentage point efficiency

the system gains, an equivalent fuelsaving is achieved. I.e. an increase inefficiency of 6% equates to a 6%saving in fuel costs

• Assists with meeting mandatoryenergy efficiency audit and reportingtargets

• Designs are suitable for most fuels• Less fuel burned results in lower

emissions• Lower CO2• Lower NOX• Lower particulates• Provides the possibility of a carbon

offset credit for some operators

Oil & Gas

Page 14 Harris Pye

Heat Exchangers and CondensersHarris Pye offers a worldwide service forheat exchangers and condensers.

We specialise in the repair andrestoration of the following:• Main condensers• Auxiliary condensers• Feed heaters• Cargo heaters• Jacket water coolers• Oil coolers

We maintain large stocks of various sizesand grades of fully certified materials forimmediate delivery:• Copper alloys• Carbon steels• Inconel• SMO• Stainless steels• Super duplex• Titanium

Re-tubingBy deploying highly skilled teams oftechnicians around the world we can carryout total retubing of main and auxiliarycondensers, feed heaters, cargo heaters,jacket water coolers and oil coolers.

Tube InsertsWe can restore many failed units to fullworking order, where the defect is knownto be tube-end corrosion or erosion, byway of the tube insert method.

Chemical andMechanical CleaningOur cleaning system utilises severalmethods, including Teflon coated jetbrushes that are propelled through thetubes at high speeds using compressedair and water. In addition to this, we haveseveral other types of cleaning methodsavailable.

InspectionsInspections, with the aid of three ballmicrometres and full colour video opticequipment, are carried out by a team oftechnicians prior to repairs.

Skid ManufactureGroup has all the engineering disciplinesin-house to complete the mechanical,electrical and instrumentationrequirements of the skid.

The skids are manufactured in one of ourmany global facilities, depending on theclient's region of operation' and if requiredthey can be installed and commissioned.Our experience in carbon, stainless and

more exotic duplex materials means thatall requirements can be met locally. Thisreduces the time needed to put theequipment to work for meeting productiontargets. Full materials and equipmentselection is also available, and we willcooperate with specified sub suppliers ifapplicable.

Harris Pye has built a solid reputation forboth engineering design and manufactureof various skid mounted equipment foroffshore and onshore hydrocarbonrecovery and treatment applications.

Pumping, cooling, water treatment, ROand steam injection for recovery are allapplications where Harris Pye has suppliedmultiple clients with batches of skids. The

Oil & Gas

Page 16 Harris Pye

budgets. Our in-house design team usesstate-of-the-art, 360 degree scanningequipment and software to designminutely accurate solutions, and createstunning walkthrough 3D designs. Thisnegates errors whilst ensuring fastturnaround.

We work with the client’s contractors,ship builders and managers to arrive atthe most suitable layout, products andcoverings.

Accommodation ModulesThe modules offered by Harris Pye come ina range of sizes: 12.2m/40ft, 9.8m/32ft,7.8m/26ft and 6.1m/20ft. Modules can bemade to accommodate 1, 2, 4 or 8 mendepending on the cabin layouts andnumber of bunks per cabin specified.

Our modules can be delivered with eitherA60 windows or A60 hatches. In addition,all modules are equipped with wet roomsin each cabin. Modules can also be H60fire-rated if required, and are compliantwith current SOLAS regulations.

The standard features of our modulesinclude DNV (BS EN 12079) or ABScertification, HVAC system, A60 or H60fire-rating, fire and gas detection system,sprinkler system, emergency lighting, fullautomatic shutdown (CPFG panels –optional), fire dampers, PA/TV/Tel socketsand connections. Modules can be adaptedto suit a variety of needs including, but notlimited to, galleys, recreation rooms,canteens, laundries, locker rooms andoffices.

Accommodation modules can be utilisedas either standalone units or linked andstacked together to form multi-purpose,multi-level accommodation complexes.Linking kits are waterproof, providing awatertight barrier, and are supplied witheach module. The structures are designedto link together efficiently and thusminimise valuable installation time.

Manufacture andInstallationOur highly skilled and experiencedoutfitters ensure that all stages ofprogramming and works undertakencomply with all the latest class andquality assurance regulations. Ourservices are guaranteed accordingly.

Many clients require turnkey packages, soit’s common for our department to workwith other divisions within the Group onlarge projects. This greatly aids theplanning and execution of extensive workscopes.

Installations are carried out both duringvessel refits and whilst the ship is inservice. The latter requires a riding squadof engineers and fabricators. We are wellversed in this practice, with personnel onstandby to travel at short notice and towork at sea for extended periods onscheduled projects.

Accommodation Outfitting,Galleys and ModulesOutfitting CapabilitiesHarris Pye has gained a formidablereputation over the years for the design,manufacture and installation of a myriadof elements, which allows us to providecomplete packages.

We create the right designsolution tailored to theclient’s needs and budgets.

From our specialist workshops, we cancarry out all elements of themanufacturing process in-house, to thehighest standards. Installations can becarried out by our skilled fitters duringrefits, new builds or whilst in serviceworldwide, via our mobile work squads.

DesignOperating both in marine and land basedenvironments, our outfitting departmentoffers bespoke design concept services toour clients, ensuring that the bestsolution is chosen to meet needs and

Oil & Gas

Galleys and BespokeStainless SteelWe have vast experience of installinggalley equipment on ships worldwide, andworking to tight deadlines.

We design, manufactureand install state-of-the-artgalleys.

These are completely built on ourpremises so that clients can view theinstallation prior to fitting. Theemergence of Norovirus on cruise vesselshas led to enhanced regulations forhygiene standards on ships. Theseparticularly apply to the constructionmethods used to manufacture foodpreparation facilities. Both the UnitedStates Public Health (USPH) and UnitedKingdom Public Health (UKPH) agenciesare placing great emphasis on thesematters. All our marine installationscomply stringently with both USPH andUKPH requirements.

Harris Pye also has an excellent trackrecord in onshore projects – namelystainless steel pipework. Our teams offercomplete solutions, from design andmanufacture to installation, according tothe client’s requirements. The team hascompleted extensive projects, includingfood preparation areas, galley equipment,beverage stations, galley troughs,washrooms, deck clearing stations, barsand pantries.

Page 18 Harris Pye

Marine and OffshoreRefrigeration and HVACRefrigeration Provision Plant /Cold RoomsOur highly qualified and experiencedteam offers a full design service,including insulated cold rooms for chilland deep freeze, and a repair service forall refrigeration equipment - compressors,condensers, evaporators, receivers, oilseparators and more. We use state-of-the-art equipment and deal with all theleading manufacturers, such as Carrier,York, Bitzer and Sabroe Daikin.

Our team can also retrofit refrigerants toconform with the latest legal (flag state)requirements.

Air Conditioning SystemsWe offer full design of new systems orrepair / upgrade of existing systems,including all refrigeration equipment,AHUs (air handling units), ductwork, firedampers, air outlets, insulation (thermaland fire), and full electrical and automaticcontrols, all of which fully conform toclassification requirements.

We offer turnkey chilledwater design, supply andinstallation packages.

We also offer packaged air conditioningunits for engine control rooms, cargocontrol rooms and smaller workshopareas, with a full range of explosion-proof,zone-rated equipment.

Cargo SystemsIn addition to the above, we offerservicing, repair and overhaul forclassification requirements for cooling(primary) for L.P.G. cargo systems andinert gas cooling systems, along with allrefrigerated cargo plants.

HVAC DuctworkOur experienced teams offer full design,manufacture and installation of HVACductwork.

Our system offers excellent thermal andacoustic performance in a fire-safesystem, providing an economical andefficient solution.

Oil & Gas

We offer pre-insulated spiral woundductwork and bespoke ductwork, allmanufactured in accordance with thelatest ASHRAE guidelines, SOLASRegulations and DW144 specifications.

We offer a system which excels in terms ofthermal performance, producing significantenergy savings whilst remaining durableand suitable for all acoustic applications,with superior sound attenuation.

Furniture and FurnishingsAll furniture can be individually designedand made to measure:• Steel – available in a wide variety of

RAL colours• Laminate – available in many styles

and varieties, including ‘new wood’style laminate finishes

• Upholstery and curtains – wideselection of fabrics and leathers; allIMO approved

• Flooring – all styles of laminate, hardflooring, carpets and vinyl suppliedand fitted, including ‘Amtico’ styleflooring

• Joinery• French polishing

InsulationOur range of marine products providesexcellent fire, thermal and acousticperformances combined with substantialweight savings. We have an extensiveteam who can install industrial thermalinsulation and cladding to both high andlow temperature piping, containmentvessels and exhaust systems. They canalso provide assistance on plant shutdowns. Our specialist teams offermaintenance of insulated plant andequipment, acoustic insulation solutionsfor noise problems, and passive fireprotection.

We can offer expert assistance and adviceon the design and installation of marinefire divisions. The Group offers access toan extensive knowledge database oninsulation issues associated with criticalareas such as engine rooms, vehicledecks, bulkheads, deckheads andpenetrations.

Our insulation division can provide wholeof life vessel support and maintenancearrangements for fire divisions. Thisincludes the supply and installation ofother fire boundary devices such as doors,dampers and penetrations, profile wrapfire divisions, modular panel systems andhigh temperature exhaust systeminsulation, in compliance withclassification society requirements.

Our team has extensiveexperience within theconventional marine andhigh-speed craft industry.

We have developed insulation solutionsfor structural fire protection, to meetstringent International MaritimeOrganisation, commercial and militarystandards.

ElectricalOur extensive team of skilled electriciansand technicians can offer full design,procurement and installation of allelectrical works, including:• Small power and lighting systems• Fire and gas detection systems• Variable speed drives (ventilation)

We can provide and install new galleysupplies, as per client specifications andrequirements, as well as design andinstall distribution boards.

Our services allow for integration intoexisting systems including PA/GA and IT.Our projects are completed in accordancewith all statutory and regulatoryrequirements. This is supported by acomplete set of test and commissioningdocumentation which is provided to theclient.

Plumbing and PipefittingHarris Pye has a solution for all types ofpipe installations. Our design team cantackle any problem, from new build toretrofit. We build off-site using the latestlaser scan technology. Our experiencedengineers are fully conversant with alltypes of plumbing and pipe fitting, andwork to the highest standards. Wemobilise riding crews globally 24/7, for allkinds of marine and offshore projects,from plumbing in a wet unit to highpressure pipe installations.

Our engineers have been trained in alltypes of standard marine and offshoreinstallations and in the use of allmaterials, including carbon steel, copper,cupronickel, stainless steel and UPVC, forsanitary, fresh water and chilled waterapplications, and refrigerant gradecopper.

Specialist materials include:• Instaflex Fusion welded UPVC• Loro – black and grey water pipework• Refrigerant grade copper• High pressure pipework and gas lines• Mapres – stainless steel seamless

pipe

EuropeHarris Pye Engineering Group LtdDavid Davies RoadNo.2 Barry DockBarrySouth WalesUnited KingdomCF63 4ABTel: + 44 1446 720066Fax: + 44 1446 700801E-Mail: hpuk@harrispye.com

Middle EastHarris Pye JLTPO Box 12796912th Floor Mazaya BB-1Jumeirah Lakes TowersDubai, United Arab EmiratesTel: + 971 4324 1535Fax: + 971 4324 3585E-Mail: hpoffshore@harrispye.com

AsiaHarris Pye Singapore Pte Ltd17 Gul Street 4,Singapore 629242Tel: + 65 6863 3188Fax: + 65 6863 3166E-Mail: boiler@harris-pye.com.sg

South AmericaHarris Pye Brasil LtdaRua Academico PauloSérgio Carvalho de VasconcelosN.º 780,Novo CavaleirosMacae – RJ – Brasil –Postal code / CEP: 27930-260Tel: + 55 22 2765 9950Fax: + 55 22 2765 9967E-Mail: harrispyebrazil@harrispye.com

North AmericaKeppel Marine Agencies5177 Richmond AvenueSuite 1065Houston, Texas77056USATel: + 1713 600 8371Fax: + 1713 600 8374E-Mail: mike.holcomb@kmaihouston.com

AustraliaHarris Pye Australia Pty Ltd10/11-13 Brookhollow Avenue,Baulkham HillsNSW 2153AustraliaTel: + 61 02 9894 2655Fax: + 61 02 9634 8811E-Mail: enquiries@harris-pye.com.au

www.harrispye.com