night photography photography 3 : project 2. objectives the student will demonstrate skill,...
out of 20
Post on 24-Dec-2015
Embed Size (px)
- Slide 1
- Night Photography Photography 3 : Project 2
- Slide 2
- Objectives The student will demonstrate skill, independent thinking, and craftsmanship (artisanship) in the use of media, techniques, and processes to achieve desired intentions in works of art and design. The student will investigate and describe the process of taking a photograph at night.
- Slide 3
- Project 2: Night Photography Taking photographs at night presents unique challenges. Exposure times must be very long, so hand- holding the camera is out of the question. However, with a steady place to rest the camera (which need not be a tripod), and a long exposure, the light gathering ability of your camera can greatly exceed the human eye, allowing you to capture a shot of something you could not normally see.
- Slide 4
- Project Criteria You will shoot 30 photographs using night photography techniques found during your research to document the following night themes: See following slides...
- Slide 5
- Outdoor Night Scene of Nature Head outside, find somewhere stable to rest your camera, and photograph a picturesque natural night scene. We want to see absolutely no motion blur due to camera movement in your shot. You may wish to use the self-timer mode on your camera to avoid the problem of moving the camera when you press the shutter button. As this is a night scene, your exposure time should be at least one or two seconds. For this nature requirement, you may will want to find a landscape illuminated by the sky and/or moon and/or artificial lights, but the subject should be nature (and not artificial objects). It's okay if there is an incidental amount of manmade stuff in your scene, but your photograph should be all or almost all natural, and the subject should clearly be nature.
- Slide 6
- Outdoor Night Scene of Architecture As in the last slide, take a night photograph of at least one or two seconds exposure with absolutely no motion blur, but this time your subject should be architecture. Example subjects include bridges, city streets, buildings, cityscapes, etc. Reminder: your photo should be well exposed, so we can see detail in the buildings and other objects -- don't make it so dark that all we can see are the lights.
- Slide 7
- Painting with Light Take a long-exposure photo in which you use a light source as if it were a painter's brush. You should move the light around to create the scene you want over the course of the exposure. You can do this by making a moving light source the subject as in our example, or by pointing the light at the parts of the scene you wish to be illuminated over the course of the exposure. For example, you may want to walk around in your scene during the exposure with a hand-held camera flash, firing it in places you would like to be illuminated. In general, you may use any light source you have available to you: bike lights, LEDs, candles, flashlights, or even your cell phone screen will all cast light into the scene in different ways. Be creative!creative
- Slide 8
- Light and Color Find a colored object and a strongly colored light source (such as an LED) such that the color of the object as photographed by your digital camera looks dramatically different under that light source versus under normal lighting. Take multiple photographs demonstrating this effect - one under normal lighting and one under colored lighting. Include in each photograph a white (neutral- colored) object as a comparison. You may have to experiment a bit. The effect will be strongest when using a light source with a narrow spectrum, such as the sodium lamps you find in parking lots or the LEDs on your electronics.
- Slide 9
- Color as a Pictorial Take a photo that is primarily monochromatic (i.e. grayscale or a single desaturated color like grayish-brown) that has one or more elements sharing a single common bright color. For example, a black-and-white photo with three red apples. You can achieve the effect with any combination of setup and Photoshop, meaning that your original photo doesn't have to satisfy the requirement as long as you use Photoshop to selectively saturate everything that's not your color accent. Be creative here, and have fun with this one! Make sure you document how you set up the shot and what, if anything, you did in Photoshop to achieve the effect. (You don't need to upload the pre-Photoshop shot, and again, you don't necessarily even have to use Photoshop if you can achieve the effect without it.)
- Slide 10
- Project Examples
- Slide 11
- Slide 12
- Slide 13
- Slide 14
- Slide 15
- Slide 16
- Slide 17
- Slide 18
- Slide 19
- Slide 20
- After you shoot: You will turn in a digital contact sheet to receive credit. We will have a class critique on the prints and discuss experiences. Choose best three photos to digitally edit and hand in for the final project. lastname_firstname_night01.jpg lastname_firstname_night02.jpg lastname_firstname_night03.jpg
View more >
Craftsmanship. Customization. Support. - ?· Craftsmanship. Customization. Support. ... Make / Model…
Computational Light Transport Computational Photography ... We demonstrate a new technique that allows