nexus 4000 series - alrux - software startup · pdf filehardness conversion rockwell, rockwell...

16
NEXUS 4000 SERIES

Upload: phamthuy

Post on 17-Mar-2018

244 views

Category:

Documents


1 download

TRANSCRIPT

NEXUS 4000 SERIES

NEXUS 4000 Series Vickers hardness tester

www.innovatest-europe.com 3

Features

High-end Vickers/Knoop/Brinell tester with low and high force ranging from 10gf/0.098N to 62.5kgf/61.2N. Closed Loop, Load Cell, Force Feedback technology for a reliable fast measurement procedure. Modular design, fits to almost any budget.

The NEXUS 4000 series of Micro/Macro Vickers, Knoop & Brinell hardness testers combines a practical design with universal specifications. State-of-the-art closed loop, load cell technology and a - Patent Pending - force feedback system, assure fast test results at the highest possible accuracy.

Unmatched consistency, repeatability and reliability now become affordable. The closed loop system applies force, calculates, filters and controls digital data in a 32-bits embedded CPU system.

The tester has a 4 position turret which can be customized by using different indentors, objectives, stages or IMPESSIONS indent measuring system, meeting your particular request and budget.

The NEXUS 4000 series meets or exceeds, ISO, ASTM, JIS (Nadcap) standards.

Test procedure control

Traditional hardness testing systems use a “dead weight” mechanical design or inaccurate spring force mechanism to apply the test force. Such systems are lacking test control, as there is no feed-back on the actual applied force.

The Closed Loop technology with a force feedback system, as applied in the NEXUS 4000 Series, constantly measures and controls the applied force on the tester’s indentor and tested surface. Consequently, this superior control system offers an almost unlimited selection of test loads and test rates for virtually any test condition imaginable.

TimeForce

SelectedForce

Comm

on d

ead

weig

ht sy

stem

s

Clo

sed

loop

forc

e fe

edba

ckOvershoot

CLOSEd LOOP VS dEAd wEIgHT

SUPErIOr FOrCE CONTrOL

Accuracy, reliability & efficiency

Elimination of overshoot due to sophisticated algorithms detecting contact between the indentor and the object’s surface.The application and removal of the test force is fully automatic, as well as the positioning of the indentor and the positioning of the pre-determined objective. The result is a flawless absolute vibration free operation while reducing the operator’s efforts to a minimum.

Time

Comm

on d

ead

weig

ht sy

stem

s

Clo

sed

loop

forc

e fe

edba

ck

Overshoot

Force

SelectedForce

CLOSEd LOOP VS dEAd wEIgHT

HIgH SPEEd MEASUrEMENT

4 www.innovatest-europe.com

NEXUS 4000 Series Vickers hardness tester

Upgrade your nexus later

The NEXUS 4000 series offers upgrades on request. For instance, your budget and your requirements allow a Vickers tester. Your choice could be a NEXUS Vickers/Knoop tester 4300. At any moment after your purchase you can upgrade your tester from for instance Vickers to Macro, Micro-Vickers or even to Brinell at fixed prices. The upgrades are possible in the 4300 or 4500 range. It requires simply a phone call to your distributor or to INNOVATEST® and the upgrade does not take more than a couple of hours, including calibration. Investing in a NEXUS series tester guarantees access to almost any load application in the Vickers, Knoop and Brinell range up to 62.5kg.

High accuracy, flexibility and pure efficiency are synonyms for the NEXUS 4000 series.

Available force configurations

NEXUS 4300 1kgf/9.8N, 2kgf/19.6N, 2.5kgf/24.5N, 3kgf/29.4N, 4kgf/39.2N, 5kgf/49N, 10kgf/98N, 20kgf/196.13N, 30kgf/294.19N

NEXUS 4301 1kgf/9.8N, 2kgf/19.6N, 2.5kgf/24.5N, 3kgf/29.4N, 4kgf/39.2N, 5kgf/49N, 6.25kgf/61.29N, 10kgf/98N, 15.625kgf/153.2N, 20kgf/196.13N, 31.25kgf/306.45N

NEXUS 4302 0.2kgf/1.96N, 0.3kgf/2.94N, 0.5kgf/4.9N, 1kgf/9.8N, 2kgf/19.6N, 2.5kgf/24.5N, 3kgf/29.4N, 4kgf/39.2N, 5kgf/49N, 10kgf/98N, 20kgf/196.13N, 30kgf/294.19N

NEXUS 4303 0.02kgf/0.19N, 0.025kgf/0.24N, 0.05kgf/0.49N, 0.1kgf/0.98N, 0.2kgf/1.96N, 0.3kgf/2.94N, 0.5kgf/4.9N, 1kgf/9.8N, 2kgf/19.6N, 2.5kgf/24.5N, 3kgf/29.4N, 4kgf/39.2N, 5kgf/49N, 10kgf/98N, 20kgf/196.13N, 30kgf/294.19N

NEXUS 4304 As 4303 + additional 6.25kgf/61.29N, 15.625kgf/153.2N, 31.25kgf/306.45NNEXUS 4305 0.01kgf/0.098N, 0.02kgf/ 0.19N, 0.025kgf/0.24N, 0.05kgf/0.49N, 0.1kgf/0.98N,

0.2kgf/1.96N, 0.3kgf/2.94N, 0.5kgf/4.9N, 1kgf/9.8N, 2kgf/19.6N, 2.5kgf/24.5N, 3kgf/29.4N, 4kgf/39.2N, 5kgf/49N, 6.25kgf/ 61.29N, 10kgf/98N

NEXUS 4500 1kgf/9.8N, 2kgf/19.6N, 2.5kgf/24.5N, 3kgf/29.4N, 4kgf/39.2N, 5kgf/49N,

10kgf/98N, 20kgf/196.13N, 30kgf/294.19N, 50kgf/490NNEXUS 4501 1kgf/9.8N, 2kgf/19.6N, 2.5kgf/24.5N, 3kgf/29.4N, 4kgf/39.2N, 5kgf/49N,

6.25kgf/61.29N, 10kgf/98N, 15.625kgf/153.2N, 20kgf/196.13N, 31.25kgf/306.45N, 62.5kgf/612N

NEXUS 4502 0.2kgf/1.96N, 0.3kgf/2.94N, 0.5kgf/4.9N, 1kgf/9.8N, 2kgf/19.6N, 2.5kgf/24.5N, 3kgf/29.4N, 4kgf/39.2N, 5kgf/49N, 10kgf/98N, 20kgf/196.13N, 30kgf/294.19N, 50kgf/490N

NEXUS 4503 0.1kgf/0.98N, 0.2kgf/1.96N, 0.3kgf/2.94N, 0.5kgf/4.9N, 1kgf/9.8N, 2kgf/19.6N, 2.5kgf/24.5N, 3kgf/29.4N, 4kgf/39.2N, 5kgf/49N, 10kgf/98N, 20kgf/196.13N, 30kgf/294.19N, 50kgf/490N

NEXUS 4504 As 4503 + additional 6.25kgf/61.29N, 15.625kgf/153.2N, 31.25kgf/306.45N, 62.5kgf/612N

www.innovatest-europe.com 5

Manual X-Y stagedigital manual X-Y stageMotorized X-Y stageMotorized X-Y-Z stage

Stages

Vickers, Knoop or Brinell or 2 of these simultaneously

Indentors

5x for 75x magnification10x for 150x magnification20x for 300x magnification40x for 600x magnification

Objectives

Electronic digital microscope with precision encoder providing 15x magnification

Eyepiece

Fully automatic 4 position turret for Micro-Vickers/Macro Vickers, Knoop or Brinell measurements.Featuring 3 objectives at choice, all 3 objectives can be used for measuring and observation.

Turret configuration

6 www.innovatest-europe.com

Hardness scales Micro-Vickers, Macro-Vickers, Knoop, Brinell Test force selection Test force selectable over menu operationTest procedure Automatic, loading/dwell/unloadingHardness value 5 digitsLoading speed Variable, depending on selected forceTurret 4 positions over 360°, fully automatic, memorized start position,

option for 2 indentors and 2 objectives or 1 indentor and 3 objectivesTest force accuracy <1% for test force from 100gr/0.98N to 30kgf/294.19N,

< 1.5% for test force below 100grTest loads 0.01kgf/0.098N, 0.02kgf/0.19N, 0.025kgf/0.24N, 0.05kgf/0.49N, 0.1kgf/0.98N,

0.2kgf/1.96N, 0.3kgf/2.94N, 0.5kgf/4.9N, 1kgf/9.8N, 2kgf/19.6N, 2.5kgf/24.5N, 3kgf/29.4N, 4kgf/39.2N, 5kgf/49N, 6.25kgf/61.29N, 10kgf/98N, 15.625kgf/153.2N, 20kgf/196.13N, 30kgf/294.19N, 31.25kgf/306.45N, 50kgf/490N, 62.5kgf/612N

User display Length of diagonals, hardness value, converted value, test force, online statisticsdisplay resolution 0.1 HV, HK and HBHardness conversion rockwell, rockwell Superficial, Brinell, Leeb & TensileStandards Meets or exceeds, ISO, ASTM, JIS (Nadcap) standardsStatistics Total test, max, min, average, range, standard deviation,

all in real time after each testControl panel Start test, stop test, light intensity, dwell time, print, clear,

menu operation for date, time, scale and load settings, languageMemory Memory for batch testing results (20 test results)Connectivity rS-232 Bi-directionalLoading mechanism Fully automatic, closed loop, force feedback, loading, dwell, unloadingdwell time setting default 10 seconds,

user defined 1 to 60 seconds (1 sec increments)Printer Built-in, silent high speed thermal printerElectronic microscope Bright dual line filar eyepiece with 15x magnification, 0.01µm readingTest color (standard) Laboratory whiteLight source Halogen 12V, 30 watt, green filter, dimmableOptical path 2 way, eyepiece/video/ccd/cmos cameraworkpiece accommodation Vertical capacity 165mm (maximum workpiece height), Horizontal capacity 140mm (from center-line)Stage dimensions Stage 100mm x 100mm, Travel 20mm x 20mm, reading 0.01mmOperating temperature 10°C to 35°C, non-condensingHumidity 10% to 90% non-condensingMachine dimensions 250mm x 610mm x 650mmMachine weight 51kgPower consumption 390wPower supply 100VAC to 240VAC, 50/60Hz, single phase

Technical specifications

NEXUS 4000 Series

www.innovatest-europe.com 7 www.innovatest-europe.com 7

• Flatanvil,hardened,ø60mm• Vickerstestblock(2pcs)• ManualX-Y-Zstage• Objectives5x,10x,20x(4300,4301,4302and4500

all models) and 10x, 20x, 40x (4303, 4304 and 4305)• Electronicdigitaleyepiece15x• Setofworkpiecefixtures,vice,clamp• Sparehalogenlamp• Built-inthermalprinter• Fuse• Fouradjustablefeet• Powercable• INNOVATEST® certificate• Installation&usermanual• Color: Laboratory white

Standard delivery

• Certifiedindentors(ASTM,DIN,ISO)• Certifiedreferencehardnessblocks

(ASTM, dIN, ISO)• Customtestingtables• Objectives5x,40x• IMPRESSIONS™XT

Video indent measuring systems • MotorizedX-Ystage(smallorlarge)• MotorizedX-Y-Zstage(autofocus)• Solidtestertableandstoragecabinet

Optional accessories

NEXUS 4300 Vickers, Knoop, test forces 1kgf/9.8N, to 30kgf/294.19NNEXUS 4301 Brinell, test forces 1kgf/9.8N to 31.25kgf/306.45NNEXUS 4302 Macro Vickers, Knoop, test forces 0.2kgf/1.96N to 30kgf/294.19NNEXUS 4303 Micro/Macro Vickers, Knoop, test forces 0.02kgf/0.19N to 30kgf/294.19NNEXUS 4304 Micro/Macro Vickers, Knoop, Brinell, test forces 0.02kgf/0.19N to 31.25kgf/306.45NNEXUS 4305 Micro/Macro Vickers, Knoop, Brinell, test forces 0.01kgf/0.098N to 10kgf/98N

NEXUS 4500 Vickers, Knoop, test forces 1kgf/9.8N to 50kgf/490NNEXUS 4501 Brinell, test forces 1kgf/9.8N, to 62.5kgf/612NNEXUS 4502 Macro Vickers, Knoop, test forces 0.2kgf/1.96N to 50kgf/490NNEXUS 4503 Micro/Macro Vickers, Knoop, test forces 0.1kgf/0.98N to 50kgf/490NNEXUS 4504 Micro/Macro Vickers, Knoop, Brinell, test forces 0.1kgf/0.98N to 62.5kgf/612N

Order details

8 www.innovatest-europe.com

NEXUS 4000 Series IMPrESSIONSTM Video indent measuring system

www.innovatest-europe.com 9

Features

• Manual,semiautomatic,fullyautomaticindent measuring system with advanced functionality

• ManualorautomaticmeasurementoftheindentontheLCDscreen

• CaseHardnessDepth,store,file,handleimagesanddataonthe harddisk

• Optionalautofocus• Optionalautomaticilluminationsetting• IndentZOOMfunction

Table option 1Analogue stage micrometers

Table option 3Large motorized stage

Table option 2digital stage micrometers

10 www.innovatest-europe.com

NEXUS 4000 Series IMPrESSIONSTM Video indent measuring system

AUTOMATIC MEASUrEMENT MAgNIFIEd, FINE AdJUSTMENT

FULL SCrEEN, ZOOM rEPOrT gENErATOr

www.innovatest-europe.com 11

IMPrESSIONS XT V1.01 license (CCd camera and C-mount included)Software for on screen measurement of Vickers / Knoop, LCd industrial dVI touch screen included.

IMP-1 Indent measuring software, included CCd camera (see above specifications)IMP-2 Indent measuring software, included CCd camera and dVI touch screen (see above specifications)IMP-3 Indent measuring software, included CCd camera and dVI touch screen (see above specifications)IMP-4 Indent measuring software, included CCd camera and dVI touch screen (see above specifications)IMP-5V Indent measuring software, included CCd camera and dVI touch screen (see above specifications)IMP-6V Indent measuring software, included CCd camera and dVI touch screen (see above specifications)

Order details

IMP-1 (Basic)

IMPrESSIONS XT V1.01 license, (for manual X-Y stage). (CCd camera and C-mount included)Software for manual and automatic measurement of Vickers / Knoop, Indent zoom function, automatic light adjustment, LCd industrial dVI touch screen included.

IMP-2 (Standard)

IMPrESSIONS XT V1.01 license, (manual 1 axis digital X-Y stage). (CCd camera and C-mount included) Software for manual and automatic measurement of Vickers / Knoop, Indent zoom function, digital micrometer (1) on X-Y stage, automatic light adjustment, LCd industrial dVI touch screen included.

IMP-3 (With one stage micrometer)

IMPrESSIONS XT V1.01 license, (manual 2 axis digital X-Y stage). (CCd camera and C-mount included) Software for manual and automatic measurement of Vickers / Knoop, Indent zoom function, digital micrometers (2) on X-Y stage, automatic light adjustment, LCd industrial dVI touch screen included.

IMP-4 (With two stages micrometers)

IMPrESSIONS XT V1.01 license, (motorized X-Y stage). (CCd camera and C-mount included)Software for manual and automatic measurement of Vickers / Knoop, Indent zoom function, automatic light adjustment, coordinate multi pattern testing module, motorized X-Y stage, LCd industrial dVI touch screen included, virtual mouse function.

IMP-5V (With motorized XY stage)

IMPrESSIONS XT V1.01 license, (motorized X-Y stage and motorized Z-axis, auto focus). (CCd camera and C-mount included)Software for manual and fully automatic measurement of Vickers / Knoop, Indent zoom function, automatic indent focus, automatic light adjustment, coordinate multi pattern testing module, motorized X-Y stage, LCd industrial dVI touch screen included, virtual mouse function.

IMP-6V (With motorized XY stage & AF)

12 www.innovatest-europe.com

www.innovatest-europe.com 13

Technical drawing NEXUS 4000

All dimensions are in mm

250

650

550

MA

X 1

65 MAX 140

MAX 160

250

40

100

14 www.innovatest-europe.com

www.innovatest-europe.com 15

All dimensions are in mm

Technical drawing NEXUS 4000

250

650

550

MA

X 1

65 MAX 140

MAX 160

250

40

100

Changes in products and/or product specifications can emerge due to new technologies and continuous development.We reserve the right to change or modify specifications of products without prior notice.We recommend you to contact our sales office for up-to-date information.© All rights reserved

Represented by:

IN12-1

50

090315

CORPORATE HEAD OFFICEINNOVATEST Europe BVmANuFACTuRINg, DISTRIBuTION & SERVICEBorgharenweg 1406222 AA Maastricht (The Netherlands)Phone: +31 43 3520060Fax: +31 43 3631168E-mail: [email protected]: www.innovatest-europe.com

BRANCHE OFFICESINNOVATEST Benelux BVBASAlES & SERVICEPhone: +32 12 779002Fax: +32 12 779003E-mail: [email protected]: www.innovatest-europe.com

INNOVATEST Shanghai Co., ltd.ASIA & CHINA SAlES & SERVICEBuilding 2, No.123, 1165 Nong Jindu Road,South Metropolis Industrial ParkMinhang District, Shanghai, P.R. ChinaZip code: 201108E-mail: [email protected]: www.innovatest-shanghai.com

Changes in products and/or product specifications can emerge due to new technologies and continuous development.we reserve the right to change or modify specifications of products without prior notice.we recommend you to contact our sales office for up-to-date information.© All rights reserved

represented by:

IN12-1

49

201015

CORPORATE HEAD OFFICEINNOVATEST Europe BVMANUFACTURINg, DISTRIBUTION & SERVICEBorgharenweg 1406222 AA Maastricht (The Netherlands)Phone: +31 43 3520060Fax: +31 43 3631168E-mail: [email protected]: www.innovatest-europe.com

BRANCHE OFFICESINNOVATEST Benelux BVBASAlES & SERVICEPhone: +32 12 779002Fax: +32 12 779003E-mail: [email protected]: www.innovatest-europe.com

INNOVATEST Shanghai Co., ltd.ASIA & CHINA SAlES & SERVICEBuilding 2, No.123, 1165 Nong Jindu road,South Metropolis Industrial ParkMinhang district, Shanghai, P.r. ChinaZip code: 201108E-mail: [email protected]: www.innovatest-shanghai.com