newest, lightest and most powerful gas … battery type nimh 6v, 1.5ah nimh 6v, 1.5ah charging time...

INDUSTRY’S

Call or email [email protected] T: 03–8795 4600 NSW T: 02–4634 7600 QLD T: 07–3712 2600 WA T: 08–9408 9600SA T: 08–8346 5611 FNQ T: 0439 083 646 NT T: 0439 083 930 NZ T: +64–9415 2425

PlasterersMechanical Services

PlumbersElectricians

It’s what tradies need!email [email protected]

for a FREE demo

NEWEST, LIGHTEST AND MOST POWERFUL GAS TOOL

Lightweight (3,6kg)and shortestcontact arm in themarket (1,9cm): lessfatigue

Shoots 15mm-40mmnails with a diameterfrom 2,6mm to 3,7mm

Interchangeablemagazines available(long and short).Change long or shorttrak tool to suit theapplication

3,6kg

Pressed

Unpressed

1,9cm

Most powerfulgasnailer in itscategory: 112 Joules

1

6

Easy depthadjustment dial

2

Built indust cover

7

Swing trigger foreasier action

3

Direct fuel injection

4

New metal mesh suctionfilter - less maintenance

5

Smart fan: ventilator timecomputer adjusted totool and environmentaltemperature

8

Service indicator light

12

15-40mm

9

Shoots 15mm-40mmnails with a diameterfrom 2,6mm to 3,7mm

1110

[email protected] PERFORMANCE DATA IS AVAILABLE FOR ALL POWERS PRODUCTS Copyright © 2012 Powers Fasteners Australasia Pty Ltd (Powers). All rights reserved.

TRAK-IT® C5

FOR

CED EN

TRY - C5

55053

www.powers.com.auDETAILED PERFORMANCE DATA IS AVAILABLE FOR ALL POWERS PRODUCTS Copyright © 2012 Powers Fasteners Australasia Pty Ltd (Powers). All rights reserved.

TRAK-IT® C5

TRAK-IT® C5 TOOL TOOLS & ACCESSORIES

Part No Description qty qty

65301 C5 Trak-It Deluxe Tool Kit 1 n/a

65306 C5-ST Trak-It Deluxe Tool Kit (short trak tool for confined areas) 1 n/a

55583 Battery 2 n/a

55638 Charger Base 1 n/a

55620 Adapter Cord 1 n/a

54998 Pin Jam Clear Tool 1 n/a

TRAK-IT® POLE C5 POLE SYSTEM


55053 C5 Pole - 1.8 metres 1 n/a

55054 C5 Pole Bracket 1 n/a

TRAK-IT® C5 INTERCHANGEABLE MAGAZINES LONG OR SHORT TRAK OPTION TO SUIT THE APPLICATION


56351 Long Trak Magazine - 40 nail magazine 1 n/a

56307 Short Trak Magazine- 20 nail magazine 1 n/a

W LH

105 Joules C5 - 3.4kg

C5-ST - 3.3kg

LWA =113dBLPA =105dB

15 - 40mm Ø2.6mm-Ø3.0mm

C5 - 40

C5-ST - 20

Max. 900 fixings

x2 (6V, 1.5Ah)2500 fixingsper battery

Max. 150 min

L 438mmW 124mmH 373mm

W LH

L 334mmW 124mmH 373mm

65301

56351 56307

65306

54998

FOR

CED EN

TRY - C5-ST

55620

55638

55583

55054

FOR

CED EN

TRY - C5


TRAK-IT® C5 ACCESSORIES

TRAK-IT® GAS FOR C5 AND C5-ST


55301 C5 Trak-It Fuel Cell (Black) 20 80

TRAK-IT® STEP AND STRAIGHT SHANK & FUEL CELL FOR C5 AND C5-ST


55313 C5 Trak-It Pins 3.0 x 13mm Step Shank (Qty 800) & 1 Fuel Cell 800 4000

55320 C5 Trak-It Pins 2.6 x 20mm Straight Shank (Qty 800) & 1 Fuel Cell 800 4000

55336 C5 Trak-It Pins 2.6 x 35mm Straight Shank (Qty 800) & 1 Fuel Cell 800 4000

TRAK-IT® TWIST SHANK & FUEL CELL FOR C5 AND C5-ST


55336TS C5 Trak-It Pins 2.6 x 35mm Twist Shank (Qty 800) & 1 Fuel Cell 800 4000

TRAK-IT® PINS FOR HARD CONCRETE & FUEL CELL FOR C5 AND C5-ST


55317HC C5 Trak-It Pins 17mm Pins - hard concrete (Qty 800) & 1 Fuel Cell 800 4000

55322HC C5 Trak-It Pins 22mm Pins - hard concrete (Qty 800) & 1 Fuel Cell 800 4000

55313 / 55320 / 55336

55336TS

55317HC / 55322HC

APO

LO - C5-ST



STICK-E STRAP AND LATHING WASHERS STICK-E FASTENERS FOR TRAK-IT C5-ST

Part No Description mm qty qty

55062 Strap Washer 14 100 1000

55040 Lathing Washer 25 100 1000

M10 DOUBLE SHOT ROD HANGER STICK-E FASTENERS FOR TRAK-IT C5-ST - USE WITH POWERS 55322HC TRAK-IT PINS ONLY


55335 M10 Double Shot Rod Hanger 500 500

55335BOX14 Contractor Box #14 M10 Double Shot Rod Hanger - 55322HC Pins x 1000, 1 x Fuel Cell 500 500

APOLO PVC SINGLE AND DOUBLE CONDUIT CLIPS APOLO FASTENERS FOR TRAK-IT C5-ST


55400* Quick-Clip Self Locking Polyamide Pipe Clamp 12mm to 13mm 12-13 100 900

55402 Quick-Clip Self Locking Polyamide Pipe Clamp 14mm to 18mm 14-18 100 600




55410 Quick-Clip Self Locking Polyamide Pipe Clamp 47mm to 50mm 47-50 n/a 50

* 55400 clip will not fit into Apolo Channel Strut

55402554045540655408

15 – 1815 – 18

5540055410

APO

LO A

ND

STICK-E - C5-ST



STICK-E CABLE BOW DOUBLE STICK-E FASTENERS FOR TRAK-IT C5-ST


55082 Trak-It Cable Bow Double (PVC) 50 500

APOLO METAL CONDUIT SADDLES 19MM TRAK-IT C5 BREAKFREE PINS OR EITHER 17MM & 2MM PINS FOR HARD CONCRETE


55385 Metal Conduit Saddles (Zinc) 20mm 20 100 900

55390 Metal Conduit Saddles (Zinc) 25mm 25 100 900

APOLO CABLE TIE FOR CABLE TIE MOUNT APOLO FASTENERS FOR TRAK-IT C5-ST


55074* Cable Tie Mount Deluxe - C5 Version 100 900

*Powers recommends the use of quality cable ties that can sustain similar load capacities as the mounts themselves

PREMIUM WEATHER-RESISTANT CABLE TIE UV STABILISED

Part No Description Length Width Strength qty qty

CT200HDUV* Premium weather-resistant Nylon Cable Tie - Black 200mm 7.6mm 55kgs 100 100

* To compliment Stick-E and Apolo cable tie mounts part numbers 55074, 55075, 55076. Powers recommends the use of quality cable ties that can sustain similar load capacities as the mounts themselves.

UltimateTensile Load

APO

LO - C5-ST



METAL ANGLE CLIP FOR TRAK-IT C5-ST


55077-AAT Metal Angle Clip (Zinc) 100 900

APOLO PVC SINGLE AND DOUBLE CONDUIT CLIPS APOLO FASTENERS FOR TRAK-IT C5-ST


55340 PVC Conduit Clip 16mm 16 100 900



55372 PVC Double Conduit Clip from 16mm to 19mm 16-19 100 600



553405535055360

553725537555376

APOLO CHANNEL STRUT APOLO FASTENERS FOR TRAK-IT C3-ST


55450 PVC - Channel Strut for self locking Pipe Clamps 1 metre length 1 30 25mm wide 11mm height

55452 Galvanised Metal - Channel Strut for self locking Pipe Clamps 2 metre length 1 24 20mm wide 8mm height

VIC T: 03–8795 4600 NSW T: 02–4634 7600 QLD T: 07–3712 2600 WA T: 08–9408 9600SA T: 08–8346 5611 FNQ T: 0439 083 646 NT T: 0439 083 930 NZ T: +64–9415 2425

TRA

K-IT C3 A

ND

C5

TRAK-IT® C5 SPECIFICATIONS

C3 ST

TRAK-IT® TOOL SPECIFICATIONSC3 AND C5 MODELS

MODEL C3 C3-ST C5 C5-ST

Tool Body Precision Moulded Aluminium and Plastic Precision Moulded Aluminium and Plastic

Tool Length 440mm 339mm 438mm 334mm

Tool Height 389mm 389mm 373mm 373mm

Tool Width 106mm 106mm 124mm 124mm

Tool Weight 3.7kgs 3.6kgs 3.4kgs 3.3kgs

Power Capacity 90 Joules 105 Joules

Magazine Pin Capacity 42pin 22pin 42pin 22pin

Pin Length Capacity (range) 13mm - 38mm 13mm - 38mm

PINS

Pin Length (Standard Pins) Ø 2.6mm 13mm, 19mm, 25mm, 32mm & 38mm 20mm, 35mm

Pin Length (Standard Pins) Ø 3.0mm n/a 13mm

Pin Length (Standard Pins) Ø 3.7mm n/a n/a

Pin Length (Hard Concrete) Ø 2.6mm 17mm & 22mm 17mm & 22mm

Pin Length (Twist Shank) Ø 2.6mm 32mm 35mm

FUEL CELLS

Approximate Shots per Fuel Cell 1000 Pins 800 Pins

BATTERY

Battery Type NiMh 6v, 1.5Ah NiMh 6v, 1.5Ah

Charging Time 150 minutes - max 150 minutes - max

APPROVALS

International Code Council Evaluation Service (ICC-ES), ESR-2036 Evaluation Service (ICC-ES), ESR-2036

ALLOWABLE WORKING LOADS IN SOLID CONCRETEShank Dia Min Embed Min Spacing Min Edge Distance 32 MPa Concrete

mm mm mm mm Tension kg Shear kg

2.616 100 85 55 66

22 100 85 82 98

Note: 1. Allowable load capacities listed are calculated using a safety factor of 5.0 or greater. Consideration of safety factors of 10 or higher may be necessary depending on the application - such as life safety or overhead.

2. Where fixings have caused concrete to spall, a new fixing away from the spalled area must be installed.

newest, lightest and most powerful gas … battery type nimh 6v, 1.5ah nimh 6v, 1.5ah charging time...

Documents