negarramdw - docherty® | flues, chimneys, wood burning ... mdw.pdf · appliances as well as modern...
TRANSCRIPT
NegarraMDWTwin wall insulated multi-fuel stainless steel chimney system
25mm cavity with high density insulation for rapid stabilisation of flue temperature and draught
Internal and external applications
1500mm lengths now available to reduce cost and installation time
T600 N1 D V2 L50040/50 G65 T600 N1 W V2 L50040/50 G65T450 H1 W V2 L50040/50 O65
Manufactured and approved to European Standard EN1856-1 with designations
316L inner liner material specification and 304L outer liner material specification with 10 year warranty
Specialist distributor of flues, chimneys & renewable appliances
www.docherty.co.uk
approved
Negarra MDW is a twin-walled insulated stainless steel chimney system designed and approved for use with all fuels including gas, oil and approved solid fuels.
Welcome toNegarra
NegarraMDW
NEGARRA is a specialist manufacturing company producing a wide range of flue and chimney products that are installed worldwide.
Mission, vision and valuesNEGARRA is a truly customer focused business, and we take pride in our commitment to continually improve.NEGARRA innovation is defined as taking on the impossible, doing the unconventional and delivering the products our customers want - when they want them.
QualityOur products are manufactured to the highest possible quality and safety standards and approved, where applicable, to the relevant European standard. A robust quality management system is in place to ensure that these standards are adhered to.
NEGARRA policy is to minimise our effect on the environment by managing the way in which we provide services to our customers.
Negarra has developed MDW to meet the requirements for a wide range of applications and a variety of fuels. MDW is suitable for traditional negative draught appliances as well as modern high efficiency condensing appliances. The range is the ultimate in design engineering and is CE approved and certified to European Standard EN 1856-1 with designations:
DistributionNegarra MDW is exclusively available in the UK through the Docherty Group, the largest specialist flue and chimney distributor with eleven branches strategically located around the country; further details can be found on the back
of this brochure.
www.negarra.es
2
T600 N1 D V2 L50040/50 G65 T600 N1 W V2 L50040/50 G65T450 H1 W V2 L50040/50 O65
Material Specification and WarrantyThe inner liner is manufactured from 316L grade stainless steel and the outer liner from 304L grade stainless steel. The product is supplied with a ten year conditional warranty.
DescriptionNegarra MDW is a twin-wall insulated stainless steel chimney system incorporating lengths, bends, tees, and terminals. The 25mm cavity is filled with high density insulation, providing a high level of thermal resistance to ensure rapid stabilisation of flue gas temperature and draught. Negarra MDW is suitable for use with multi-fuel appliances including wood and mineral fuels. It is also suitable for condensing applications at lower temperatures by the introduction of o-ring seals - available as an optional extra.
DimensionsNegarra MDW is available in a comprehensive range of diameters suiting all applications from 125mm to 250mm.
ApprovalNegarra MDW is manufactured and approved to the latest European Standard EN1856-1.
3
NegarraMDWMDW can be supplied painted to any BS or RAL colour.
125mm and150mm diameter MDW is available ex-stock, powder coated matt black.
Components
4
Single Wall toMDW Adaptor
Diameter (Ø)
Stub length (L)
Code
125mm
60mm
720151W
150mm
60mm
721151W
175mm
60mm
722151W
200mm
60mm
723151W
250mm
60mm
724151W
Long Tapered AdaptorNot to be fitted directly to the appliance
Diameter (Ø)
Length (L)
Code
125mm
980mm
720250W
150mm
980mm
721250W
175mm
980mm
722250W
200mm
980mm
723250W
250mm
980mm
724250W
Short Tapered AdaptorNot to be fitted directlyto the appliance
Diameter (Ø)
Length (L)
Code
125mm
82mm
720149W
150mm
82mm
721149W
175mm
82mm
722149W
200mm
82mm
723149W
250mm
82mm
724149W
MDW to Single Wall Adaptor
Appliance Adaptor Increaser
Diameter (Ø1-Ø2)
Stub length (L)
Code
100-125mm
170mm
720157W
125-150mm
170mm
721157W
150-175mm
170mm
722157W
175-200mm
170mm
723157W
200-250mm
170mm
724157W
Ø
L
Ø2
Ø1
L
Ø
A
B
Ø
L
Ø
L
Diameter (Ø)
Length (A)
Height (B)
Code
125mm
120mm
50mm
720251W
150mm
120mm
50mm
721251W
175mm
120mm
50mm
722251W
200mm
120mm
50mm
723251W
250mm
120mm
50mm
724251W
Visit www.planningportal.gov.ukfor current Building Regulations
Installation Instructions Negarra MDW must only be installed by a competent approved installer and in accordance with detailed installation instructions which are available on request or can be downloaded from our website.
For additional technical information contact [email protected] or call 01635 292400
5
Adjustable Lengths
Nominal length
Effective length (L)
Ø125mm
Ø150mm
Ø175mm
Ø200mm
Ø250mm
250mm - 450mm
215mm - 415mm
720108W
721108W
722108W
723108W
724108W
500 - 950mm
465mm - 915mm
720107W
721107W
722107W
723107W
724107W
Nominal length
Effective length (L)
Ø125mm
Ø150mm
Ø175mm
Ø200mm
Ø250mm
100mm
65mm
720103W
721103W
722103W
723103W
724103W
250mm
215mm
720104W
721104W
722104W
723104W
724104W
500mm
465mm
720105W
721105W
722105W
723105W
724105W
1000mm
965mm
720106W
721106W
722106W
723106W
724106W
1500mm
1465mm
720101W
721101W
722101W
723101W
724101W
15o Elbow Diameter (Ø)
Height (A)
Offset (B)
Code
125mm
138mm
15mm
720015W
150mm
139mm
15mm
721015W
175mm
143mm
16mm
722015W
200mm
148mm
16mm
723015W
250mm
152mm
17mm
724015W
30o Elbow Diameter (Ø)
Height (A)
Offset (B)
Code
125mm
151mm
34mm
720030W
150mm
157mm
36mm
721030W
175mm
163mm
38mm
722030W
200mm
170mm
39mm
723030W
250mm
182mm
43mm
724030W
45o Elbow Diameter (Ø)
Height (A)
Offset (B)
Code
125mm
158mm
57mm
720045W
150mm
167mm
61mm
721045W
175mm
175mm
65mm
722045W
200mm
184mm
68mm
723045W
250mm
202mm
76mm
724045W
Straight Lengths
Ø
A
B
Ø
L
Ø
L
Ø
A
B
Ø
A
B
A
B
A
B
Components6
100mm Connecting Length
250mm Connecting Length
500mm Connecting Length
1000mm Connecting Length
1500mm Connecting Length
Diameter (Ø) 125mm 150mm 175mm 200mm 250mm
Height (A)
Offset (B)
Height (A)
Offset (B)
Height (A)
Offset (B)
Height (A)
Offset (B)
Height (A)
Offset (B)
336mm
53mm
481mm
92mm
725mm
157mm
1209mm
286mm
1690mm
415mm
342mm
53mm
487mm
92mm
725mm
157mm
1210mm
286mm
1693mm
416mm
347mm
54mm
492mm
93mm
734mm
158mm
1216mm
287mm
1699mm
417mm
358mm
56mm
502mm
94mm
744mm
159mm
1227mm
289mm
1710mm
418mm
367mm
57mm
511mm
96mm
753mm
162mm
1236m
290mm
1719mm
421mm
100mm Connecting Length
250mm Connecting Length
500mm Connecting Length
1000mm Connecting Length
1500mm Connecting Length
Diameter (Ø) 125mm 150mm 175mm 200mm 250mm
Height (A)
Offset (B)
Height (A)
Offset (B)
Height (A)
Offset (B)
Height (A)
Offset (B)
Height (A)
Offset (B)
355mm
111mm
485mm
187mm
702mm
311mm
1134mm
561mm
1567mm
812mm
367mm
116mm
497mm
191mm
714mm
314mm
1147mm
566mm
1568mm
816mm
380mm
121mm
510mm
196mm
726mm
319mm
1159mm
569mm
1592mm
817mm
392mm
123mm
522mm
198mm
739mm
323mm
1172mm
571mm
1605mm
823mm
417mm
131mm
547mm
206mm
764mm
331mm
1197mm
579mm
1630mm
829mm
15o Elbowcombination offsetdimensions
30o Elbowcombination offsetdimensions
45o Elbowcombination offsetdimensions
100mm Connecting Length
250mm Connecting Length
500mm Connecting Length
1000mm Connecting Length
1500mm Connecting Length
Diameter (Ø) 125mm 150mm 175mm 200mm 250mm 300mm
Height (A)
Offset (B)
Height (A)
Offset (B)
Height (A)
Offset (B)
Height (A)
Offset (B)
Height (A)
Offset (B)
356mm
176mm
462mm
279mm
639mm
459mm
992mm
813mm
1346mm
1164mm
374mm
184mm
480mm
288mm
656mm
465mm
1010mm
818mm
1363mm
1172mm
391mm
191mm
497mm
295mm
674mm
470mm
1028mm
825mm
1381mm
1177mm
409mm
198mm
515mm
302mm
692mm
477mm
1045mm
833mm
1399mm
1186mm
444mm
213mm
550mm
317mm
727mm
494mm
1081mm
847mm
1434mm
1201mm
480mm
225mm
586mm
330mm
762mm
508mm
1116mm
860mm
1469mm
1217mm
A
B
connecting length
connecting length
connecting length
7
90o Elbow
90o Tee
135o Tee
Tee Cap
Tee Capwith Drain
Rain Cap
Ø
A
B
Diameter (Ø)
Height (A)
Offset (B)
Code
125mm
176mm
157mm
720090W
150mm
189mm
179mm
721090W
175mm
201mm
182mm
722090W
200mm
214mm
195mm
723090W
250mm
239mm
220mm
724090W
Diameter (Ø)
Height (L)
Centre (A)
Offset (B)
Code
125mm
285mm
143mm
143mm
720109W
150mm
315mm
163mm
163mm
721109W
175mm
355mm
178mm
178mm
722109W
200mm
380mm
185mm
190mm
723109W
250mm
430mm
215mm
215mm
724109W
Diameter (Ø)
Height (L)
Centre (A)
Offset (B)
Code
125mm
435mm
335mm
228mm
720110W
150mm
470mm
365mm
266mm
721110W
175mm
530mm
404mm
296mm
722110W
200mm
545mm
423mm
312mm
723110W
250mm
605mm
466mm
350mm
724110W
Diameter (Ø)
Height (A)
Width (B)
Code
125mm
151mm
240mm
118112W
150mm
155mm
260mm
119112W
175mm
166mm
310mm
120112W
200mm
190mm
360mm
121112W
250mm
201mm
410mm
122112W
Diameter (Ø)
Height (A)
Code
125mm
20mm
118113W
150mm
20mm
119113W
175mm
20mm
120113W
200mm
20mm
121113W
250mm
20mm
122113W
Diameter (Ø)
Height (A)
Code
125mm
20mm
118145W
150mm
20mm
119145W
175mm
20mm
120145W
200mm
20mm
121145W
250mm
20mm
122145W
Ø
A
Ø
A
B
A complimentary Tee Cap is supplied with Tees.
A complimentary Tee Cap is supplied with Tees.
Not to be used with solid fuels unless BS EN 15287 Part 1 is complied with.
Ø
A
Ø
A
B
L
Ø
A
B
L
Components8
Diameter (Ø)
Height (A)
Code
125mm
130mm
720111W
150mm
130mm
721111W
175mm
130mm
722111W
200mm
130mm
723111W
250mm
130mm
724111W
Top Stub/Conical Terminal
Anti-RainTerminal
Anti-WindTerminal
Anti-BirdTerminal
Flashing0o - 10o
Flashing5o - 35o
Flashing30o - 45o
Diameter (Ø)
Height (A)
Width (B)
Code
125mm
209mm
240mm
118123W
150mm
215mm
260mm
119123W
175mm
249mm
310mm
120123W
200mm
252mm
360mm
121123W
250mm
273mm
410mm
122123W
Diameter (Ø)
Height (A)
Width (B)
Code
125mm
162mm
288mm
118125W
150mm
165mm
313mm
119125W
175mm
164mm
338mm
120125W
200mm
164mm
363mm
121125W
250mm
166mm
412mm
122125W
Diameter (Ø)
Height (A)
Width (B)
Code
125mm
260mm
196mm
118127W
150mm
310mm
198mm
119127W
175mm
310mm
208mm
120127W
200mm
360mm
203mm
121127W
250mm
410mm
202mm
122127W
Diameter (Ø)
Height (A)
Base (B)
Code
125mm
90mm
461mm
118.129
150mm
90mm
485mm
119.129
175mm
100mm
518mm
120.129
200mm
100mm
541mm
121.129
250mm
130mm
620mm
122.129
Diameter (Ø)
Height (A)
Base (B)
Code
125mm
129mm
318mm
118.130
150mm
137mm
541mm
119.130
175mm
148mm
569mm
120.130
200mm
152mm
609mm
121.130
250mm
182mm
692mm
122.130
Diameter (Ø)
Height (A)
Base (B)
Code
125mm
140mm
620mm
118.147
150mm
160mm
620mm
119.147
175mm
173mm
620mm
120.147
200mm
182mm
620mm
121.147
250mm
182mm
753mm
122.147
For additional technical information contact [email protected] or call 01635 292400
A
Ø
B
A
Ø
B
Ø
A
B
A
Ø
A
B
A
B
A
B
Storm Collar
9
AdjustableWall SupportBracketSupports up to 10m MDW
AdjustableWall BracketNot load bearing
Base Support PlateSupports up to10m MDW
Support Plateand ClampUsed to support MDW at non-combustible floors.Supports up to 10m MDW.
Level SupportUsed to support MDW at floor level.Supports up to5m MDW.
Diameter (Ø)
Height (A)
Diameter (B)
Code
125mm
80mm
320mm
118.132
150mm
80mm
320mm
119.132
175mm
80mm
385mm
120.132
200mm
80mm
410mm
121.132
250mm
80mm
500mm
122.132
Diameter (Ø)
Offset (A)
Width (B)
Code
125mm
250mm
131mm
118.115
150mm
280mm
135mm
119.115
175mm
305mm
135mm
120.115
200mm
325mm
140mm
121.115
250mm
360mm
145mm
122.115
Diameter (Ø)
Height (A)
Code
125mm
110mm
720183W
150mm
110mm
721183W
175mm
110mm
722183W
200mm
110mm
723183W
250mm
110mm
724183W
Diameter (Ø)
(A)
(B)
(C)
Code
125mm
90mm
310mm
223mm
118.121
150mm
101mm
334mm
245mm
119.121
175mm
106mm
358mm
257mm
120.121
200mm
125mm
380mm
284mm
121.121
250mm
137mm
382mm
293mm
122.121
Diameter (Ø)
(A)
(B)
(C)
Code
125mm
385mm
54mm
30mm
118.182
150mm
410mm
45mm
30mm
119.182
175mm
435mm
45mm
30mm
120.182
200mm
460mm
45mm
30mm
121.182
250mm
510mm
45mm
30mm
122.182
Diameter (Ø)
Height (A)
Length (B)
Code
125mm
35mm
985mm
118.137
150mm
35mm
985mm
119.137
175mm
35mm
985mm
120.137
200mm
35mm
985mm
121.137
250mm
35mm
985mm
122.137
A
B
Ø
A
A
B
A
B
Ø
A
C
B
Ø
A
A
BC
Ø
Maximum distance between adjustable wall brackets is 3m.
To be used when connecting MDW to a lintel or pre-cast chamber.
Components10
Diameter (Ø)
Width (A)
Length (B)
Code
125mm
120mm
150mm
118.136
150mm
120mm
150mm
119.136
175mm
120mm
150mm
120.136
200mm
120mm
150mm
121.136
250mm
120mm
150mm
122.136
Diameter (Ø)
(A)
(B)
Code
125mm
178mm
250mm
720004W
150mm
203mm
285mm
721004W
175mm
228mm
321mm
722004W
200mm
253mm
356mm
723004W
250mm
303mm
427mm
724004W
Diameter (Ø)
Height (A)
Code
125mm
35mm
118.117
150mm
35mm
119.117
175mm
35mm
120.117
200mm
35mm
121.117
250mm
35mm
122.117
Diameter (Ø)
Height (A)
Code
125mm
113mm
118.135
150mm
113mm
119.135
175mm
113mm
120.135
200mm
113mm
121.135
250mm
113mm
122.135
Diameter (Ø)
Code
125mm
118.114
150mm
119.114
175mm
120.114
200mm
121.114
250mm
122.114
Diameter (Ø)
Code
125mm
231.175
150mm
232.175
175mm
233.175
200mm
234.175
250mm
235.175
Roof RafterSuportBracket
Guy WireBracket
‘O’ Ring SealTo be used when MDW is serving condensing appliances
Locking BandA complimentary locking band is supplied with each fitting
StructuralLocking BandDesigned to replace the complimentary locking band where additional support is required for offsets and external joints above eaves height
AdjustableWall Sleeve
Where the chimney passes through a wall, the opening must be lined with a wall sleeve. Negarra provides two options for wall thicknesses of 250mm to 350mm and 450mm to 550mm
Maximum supported length is 5m.
Increases unsupported length by 1m - page 14 refers.
DecorativeTrim PlateTo tidy the internal aperture where the chimney exits the wall at 45o
Diameter (Ø)
Height (A)
Code 250mm-350mm
Code 350mm-450mm
125mm
165mm
720244W
720247W
150mm
190mm
721244W
721247W
175mm
215mm
722244W
722247W
200mm
240mm
723244W
723247W
250mm
290mm
724244W
724247W
A
B
WT
Ø
45o
A
B
A
Ø
A
Ø
Where MDW passes through a combustible floor, a ventilated fire stop plate must be used both above and below the aperture. A support clamp supports the weight of the chimney on the upper fire stop plate. Both plates must be secured using 6mm screws. The aperture must be constructed to maintain 65mm distance from the outer wall of the chimney to combustible materials. The aperture must additionally be lined with a fire resistant board. All subsequent floors having combustible floors must be treated in this way.Chimney joints must not be positioned in the thickness of floor or ceiling joist spaces or within 50mm of floor or ceiling.
Firestops are supplied in packs to include both fire stop plates and a support clamp. Three options are available with the ceiling fire stop supplied galvanised, painted white or painted black.
11
space whereappliance is
installed
Ventilated FirestopsPacks
Installation of fire stop components
Installation of chimney and enclosure around a fire stop
Diameter (Ø)
(A)
(B)
Code - white
Code - black
Code - galvanised
125mm
192mm
376mm
720001W
720002W
720003W
150mm
218mm
410mm
721001W
721002W
721003W
175mm
243mm
424mm
722001W
722002W
722003W
200mm
269mm
450mm
723001W
723002W
723003W
250mm
NA
NA
724001W
724002W
724003W
occupied space
Combustible floor
Aperture lined with fire resistant board
Adaptor to MDW
30 minute fire rated enclosure
Support clamp
Minimum 65mm air gap
Combustible floor
Minimum 150mm
Vitreous connecting pipe
Aperture lined with fire resistant board
Minimum 65mm airgap from the outer casing of the flue to the inner surface of a 30 minute fire rated enclosure
B
BA
Components12
Carbon Monoxide AlarmIn rooms where a solid fuel appliance is installed it is a legal requirement to fit an audible CO alarm conforming to BS EN 50291, positioned in accordance with Building Regulations Approved Document J.
NEGARRA MDW chimney systems are manufactured to the highest quality standards. Under normal operating conditions, NEGARRA MDW provides many years of reliable service and carries a 10 year conditional warranty depending on application, installation and maintenance.
The components within the range can be vulnerable when exposed to the products of combustion from solid fuel appliances and this is especially true for terminals. Condensate collectors are also vulnerable, particularly if the flue system is not regularly maintained and cleaned.These components are considered ‘incidental‘ and their life expectancy will vary depending on location, application, fuel usage and maintenance. For this reason, these fittings are covered by a 2 year warranty and not the 10 year conditional warranty.NEGARRA MDW chimney system carries a 10 year conditional warranty for any defect due to faulty manufacture, this is provided the system has been installed in accordance with NEGARRA installation instructions, and has been used for the purpose it was designed for. Furthermore, the system must be regularly cleaned, maintained and inspected. This should be carried out at least once per year, and more regularly if the appliance is used continuously or frequently, by a member of one of the HETAS recognised chimney sweep associations (APICS, GMCS or NACS) or a HETAS Approved Engineer. Written documentation to demonstrate the inspection and cleaning of the chimney must be kept to validate the ten year warranty.When burning mineral fuel or smokeless fuel in your appliance, care should always be taken to use a high quality fuel. Only HETAS or SFA (Solid Fuel Association) approved fuels must be used with NEGARRA MDW. For guidance on fuel choices please visit www.hetas.co.uk.Under no circumstances should an appliance be located where there is the potential of chemical contamination of the combustion air.Where the chimney system is exposed to severe coastal locations, you must ensure adequate protection to the outer components of NEGARRA MDW.A chimney fire will invalidate the warranty; in the event of a chimney fire it is always advisable to replace the complete chimney system.
Warranty terms and conditions
13
Installation GuideAlso see illustrations pages 14-15
MDW must only be installed by a competent approved installer and in accordance with the full installation instructions that are available on request.
Chimney and flue designThe chimney and flue design is the responsibility of the engineer or installer and should conform to the requirements of Approved Document J and, where appropriate, BS EN 15287 part 1.Any variation will require the designer to ensure the performance of the chimney meets the requirements of the appliance by calculation using the methods given in BS EN 13384 part 1 or any proprietary software program based on this standard.
Regulations and standardsThe regulations and standards covering the design and installation of a chimney system in the UK are as follows:
Building RegulationsEngland and Wales -- Approved Document J - Combustion Appliances and Fuel Storage Systems.Scotland -- Scottish Building Standards Technical Hand Book Section 3.Northern Ireland – Building Regulations Part L – Combustion Appliances and Fuel Storage Systems.
StandardsBS EN 15287 part 1 - Chimneys. Design, installation and commissioning of chimneys Part 1: Chimneys for non-room sealed heating appliances.BS EN 13384 part 1 - Chimneys. Thermal and fluid dynamic calculation methods.
Flue sizingThe sizing of flues for appliances should be based on the type of fuel and the appliance to be used.• Gas AppliancesIn the case of gas appliances the Building regulations Approved Document J table 5, the gas safety in use regulations and in all cases as required by the manufacturers’ installation instructions.• Oil AppliancesFlues for oil appliances should be sized in accordance with the requirements of Approved Document J Paragraphs 4.4 and 4.5.• Solid Fuel AppliancesThe size of flues for solid fuel appliances should be in accordance with the requirements of Approved Document J Paragraphs 2.4 to 2.7 and as given in table 2 of ADJ.For solid fuel appliances with back or side flue outlet, the maximum permitted length of horizontal chimney or flue pipe is 150mm.
Where the chimney passes through a wall, the opening must be lined with a wall sleeve.The termination height of the chimney will depend on appropriate regulations and standards.The connection between a connecting flue to MDW must be made in the same room as the appliance. According to the UK Building Regulations, the chimney must be accessible for inspection and cleaning. We recommend the inclusion of a tee to provide easy access.Each chimney section and connected fittings shall be used as manufactured for assembly on site without any alteration. Please make sure that all elements are installed the right way up.The system must be adequately supported with elements supplied by NEGARRA. The support components must be used at intervals depending on the load bearing criteria quoted on pages 14 and 15. Wall brackets are not load bearing and should be used to provide lateral stability only, and at intervals not exceeding the criteria quoted.Where the chimney passes through a combustible floor a ventilated fire stop plate must be used both above and below the aperture. A support clamp supports the weight of the chimney on the upper fire stop plate. Both plates must be secured using 6mm screws. The aperture must be constructed to maintain 65mm distance from the outer wall of the chimney to combustible materials. The aperture must additionally be lined with a fire resistant board. All subsequent floors having combustible floors must be treated in this way.Chimney joints must not be positioned in the thickness of floor or ceiling joist spaces or within 50mm of floor or ceiling.Where the chimney passes through any occupied space other than the room in which the appliance is installed, it must be fully enclosed with fire resistant material maintaining the 65mm clearance to the outer wall of the chimney. The enclosure is to prevent damage to the chimney, to prevent human contact and to ensure no combustible material can be placed too close to the chimney. The enclosure must have an access panel measuring at least 10,000mm2.Where the chimney passes through a roof space, it is essential that it is adequately supported by bracing to roof timbers. If there is a chimney run of more than 1.5m from the ceiling support to the roof support, use a bracing bracket and rigid stays for such application. Also, provision must be made to ensure that no accidental placement of combustible product can occur within 65mm of the external casing of the chimney. For example, a mesh or screen around the chimney. This must cover the first 1m of the chimney and must go down to the upper face of the ceiling. Any change of direction in a flue will create resistance to the flue gas movement. Building Regulations do not allow any part of the chimney system to form an angle greater than 45 degree from the vertical. Where the system is used for solid fuels and oil, no system can be constructed with more than two separate offsets in the chimney. If a 90 degree tee is used on the back of the appliance, this constitutes one offset. The length of chimney between two elbows must not exceed 20% of the total length of the chimney.
NegarraMDW
Structural Locking Band When fitted increases unsupported length to 3.0 metres
Top Stub or Rain Cap
Adjustable Wall BracketMaximum distance between wall brackets 3.0 metres
30° Elbows
Adjustable Wall BracketMaximum distance between wall brackets3.0 metres
Length
Locking Band
135° Tee
Adjustable Wall Sleeve
Wall Support BracketSupports up to 10 metres of chimney
Tee Cap and Drain
Adaptor to MDW
45° Vitreous Elbow with Door
Vitreous Enamel Connecting Flue
Where a drain can be incorporated in the tee at the base of the chimney then a top stub should be used.Note: Rain water ingress can be reduced by use of a terminal where a drain cannot be included
It is not a requirement, but ideally 30° elbows should be used to form the offset as this reduces risk of blockage and corrosion of the inner skin
External Trim Plate
Internal Trim Plate
The use of a secured guy wire bracket can increase unsupported length by 1.0 metre
Standard Unsupported LengthMaximum 1.5 metres
Minimum height of 600mm before an offset
Full installation instructions on request
Structural Locking Band
Installation External Application14
15Installation Internal Application NegarraMDW
Storm Collar
Wire MeshShields chimney in loft space
Ventilated Fire Stop and Clamp
Length
Tee Cap
150mm maximum
Adaptor to MDW
Vitreous Enamel Connecting Flue
Roof Flashing
Rafter Support
Ventilated Firestop
Ventilated Fire Stop
90° Vitreous Tee
Ventilated Fire Stop and Clamp
425mm minimum
Locking Band
Fire Rated Board Around Aperture
Rain Cap or Top Stub
Where a drain can be incorporated in the tee at the base of the chimney then a top stub should be used.Note: Rain water ingress can be reduced by use of a terminal where a drain cannot be included
Must cover at least 1.0 metre above floor level
Minimum 65mm clearance from the outer casing of the chimney to the inner surface of a 30 minute fire rated enclosure
Minimum 65mm clearance to combustibles
Minimum 65mm clearance to rafters
Minimum 65mm clearance to combustibles
Must have access panel at least 100mm x 100mm
Adjustable Wall Support
Full installation instructions on request
Fire Rated Board Around Aperture
9
Group Head Office Units 15/16 Colthrop Business ParkColthrop Lane, Thatcham Berkshire, RG19 4NB T: 01635 292400 F: 01635 201737 E: [email protected]
The Docherty Group in the UK
www.docherty.co.uk
Specialist distributor of flues, chimneys & renewable appliances
Docherty GroupFlue House, 55 Woodburn RoadBirminghamWest Midlands, B66 2PUT: 0121 555 6789 F: 0121 555 6727
5
3
Docherty GroupUnit 15, Robin Hood Street Ind. Est.off Alfred Street SouthNottingham, NG3 1GET: 01159 584734 F: 01159 502899
4
2
Docherty GroupCrowley Road, SwalwellGatesheadTyne and Wear, NE16 3HET: 0191 488 1111 F: 0191 488 0088
Moving soon to:Unit 15, Kingsway InterchangeTeam Valley Trading EstateGateshead, NE11 0JY
1
Docherty Group Flue House, Portway Trading EstatePortview RoadBristol, BS11 9LQT: 0117 982 8252F: 0117 982 8225
6
Docherty GroupUnit C Station Yard, Coombe RoadNorbiton, KingstonSurrey KT2 7AZT: 020 8391 0093F: 020 8397 7687
8
Docherty GroupUnits 15/16 Colthrop Business ParkColthrop Lane, Thatcham Berkshire, RG19 4NB T: 01635 292400 F: 01635 201737
7
Docherty GroupUnit 20, Flightway Business ParkDunkeswell, Devon, EX14 4RDT: 01404 890098 F: 01404 891112
9
Sure Fire Training ServicesUnit E, Fairview BuildingsHeage Road Industrial EstateRipley, Derbyshire, DE5 3GHT: 01773 570408 • 0345 260 0166F: 01773 745414 • 0345 260 0266E: [email protected]
10
Damian Tyrrell07771 654 [email protected] areas: AB, CA, DD, DG, DH, DL, EH, NE, KY, KW, HS, IV, PH, PA, FK, G, ML, KA, SR, ZE, TD, TS
Darren Willetts07850 994 [email protected] areas: B, CV, DE, DY,HR, LD, ST, SY, TF, WS, WV, WR, GL
Jason Edwards07918 561431 [email protected] areas: BA, BS, CF, DT, EX, NP, PL, SA, TA, TR, TQ
Alan Smith07545 [email protected] areas: BH, HA, OX, RG, SL, SO, SP, TW, UB, W, HP, SN
Sacha Aarons07974 975 [email protected] areas: BN, BR, CR, CT, DA, E, EC, GU, ME, N, NW, RH, SE, SW, TN, WC, PO, SM, KT
Andy Bishop07595 205 [email protected] areas: AL, CM, CO, IG, IP, MK, NN, NR, PE, RM, SG, SS, EN, LU, CB, WD, NG, LE
7
2
3
4
5
8
1
6
9
10
Area Sales Managers
Docherty Group Unit 7, Overland ParkGelderd RoadLeeds, LS27 7JNT: 01132 381200 F: 01132 381044
Docherty GroupUnit 2, Rivington CourtHardwick GrangeWarrington, WA1 4RTT: 01925 807950 F: 01925 807959
Marc Foster07918 561430 [email protected] areas: BB, BL, CH, CW, FY, IM, L, LA, LL, M, OL, PR, SK, WA, WN
Sam Lowe07966 471 [email protected] areas: BD, HD, HG, HU, HX, LS, WF, YO, S, LN, DN
Adina Heating ProductsUnit C, Fairview BuildingsHeage Road Industrial EstateRipley, Derbyshire, DE5 3GHT: 01773 571 330 F: 01773 367 989 E: [email protected]
1111
Issu
e: M
ay 2
015