Necklace making ideas-pearl and chain fringe necklace diy

It’s a distinctive piece among plenty of necklace

making ideas. So since you’re planning to design a

piece of normal necklace for your own or some

beloved ladies, it would be fun to do up this pearl

and chain fringe necklace diy project, in which you’ll

just need multiple strands of chain and several

glossy pearl beads.

Things you’ll need in fringe necklace diy:

3 strands of chain

Pearl Bead

Headpin

Eyepin

Lobster Claw Clasp

Jumpring

Flat Nose Plier

How to start the necklace making ideas?

Step1: chain preparations

1. Cut 20cm long sections of each type of chain;

2. Add one jumpring at one end to hold three

strands together;

3. Slide one pearl bead onto Eyepin, form a simple

loop at the other end and remove the excess pin;

4. Cut another three strands of 5cm long chain;

5. Open the two loops on eyepin and hook the last

links of chain strands, one for the long and the other

for the short;

6. Design the central focal chain part. You may need

to keep your chain about 10cm long. After that,

connect it with the short chains by the component

consist of eyepin and one pearl bead;

7. Make a mirror image for the other side.

In the necklace making ideas, my favorite version is always the one mixed with a strand of chain and

fringe! That must bring lots of fun while whip this pearl and chain fringe necklace diy item up!

Step2: design the fringe part

In my fringe necklace diy, the fringes are simply

made up of chains and pearl beads.

1. Snip 5 pairs of chain segments, the length should

be like: 2.5cm*4, 5cm*4 and 7.5cm*4;

2. Match 10 pieces of pearl beads with 10 headpins

and loop the end as you did in above step. Then

hook the 10 components onto the end of chains

respectively;

3. Make another 10 pieces of elements out of

headpin and pearl bead. Affix the chain segments to

the central long chain one after one. Make the

pattern be symmetrical.

Step3: add on the clasp

There you’ve finished off the funky pearl and chain fringe necklace diy project! The collocation of

chains and pearl beads, cool feelings and feminine taste may further the necklace a sense of pretty

and classic. And the amazing fringe will accent any of your outfit. What do you think? Isn’t an

ingenious piece among the necklace making ideas?

Search for a variety of shell &pearl please click:

http://www.pandahall.com/wholesale-Shell-Pearl/233.html

Add a large jumpring and your lobster claw clasp

to the ends of necklace. Additionally, add on an

extra chain to the side with clasp for a bit of

cuteness you want.

Tada!