nbar .0075 ratio 3.00 bwa -0.0020 roundhouse marke … · this digicode file is considered original...
TRANSCRIPT
Fios Home Router
Action requiredDownload and install the My Fios app for personalized setup instructions.
Don’t have internet access? Use the installation instructions inside.
If the light is red or flashing red, Verizon support is needed.
For installation help, use the My Fios app or visit verizon.com/routersupport.
Troubleshooting
©2019 Verizon. All rights reserved.
FIOS HOME ROUTER INSTALL GUIDE
09-19
0%5%25%50%75%95%100%
DigiCode Data FileACCOUNT: 8631402 ROUNDHOUSE MARKETING SERVICESORDERED BY: LYNN MAIERP.O. NUMBER: VER10882INVOICE NO.: 1593740 (PC EPS via EMAIL)
Created on 6-27-19 at 9:59:50by
SYMBOLOGY, INC.Maple Grove, Minnesota, 55369
763-315-8080
NOTICE:This DigiCode file is considered original artwork.It must be inspected and approved by the purchaser.Use of this file confirms acceptance.See the back of the Symbology invoice for Limitation of Warranty
11367280
NBAR .0075 RATIO 3.00 BWA -0.0020 FIOS HOME ROUTE INSTALL GUIDE
6/27/2019 9:59:50 AM 1593740/1-234-1 ROUNDHOUSE MARKE Encode: *11367280* PU
11367281
NBAR .0075 RATIO 3.00 BWA -0.0020 FIOS HOME WIFI EXTENDER INSTALL GUIDE
6/27/2019 9:59:50 AM 1593740/1-234-2 ROUNDHOUSE MARKE Encode: *11367281* PU
Includes:Fios Home Router ( 1 ) Power adapter ( 1 ) Ethernet cable ( 1 ) Coax cables ( 2 ) Coax splitter ( 1 )
2. Connect your devices
Wired or Wi-Fi? Your choice.
WiredA. Connect the Ethernet cable to any yellow LAN port
on your router.
B. Connect the other end to your computer.
Wi-Fi
A. Get the Wi-Fi name and password off the label on your router.
B. On your device, choose your Wi-Fi name when it appears.
C. Enter the Wi-Fi password exactly as it appears on your router label.
Note: The Fios Home Router has one Wi-Fi name that supports both 2.4GHz and 5GHz signals. The Self-Organizing Network (SON) feature allows your devices to move between the two signals automatically for an optimized Wi-Fi connection.
3. Activate your router
Open an internet browser and follow the prompts.
1. Connect your cables
A. Connect the coax cable from the coaxport on your router to a coax outlet.
B. If you ordered internet speeds greaterthan 100 Mbps, connect the Ethernetcable from the WAN port on your routerto an Ethernet outlet.
C. Connect the power cord from the routerto an electrical outlet.
D. Router will take up to 10 minutes to powerup completely. Move on when the front lightis solid white.
Note: If home is wired Ethernet, follow same steps as above using an Ethernet cable instead of a coax cable.
Installation instructions