mx series network video recorder with …...mx series network video recorder with intel inside®...
TRANSCRIPT
MX SERIES NETWORK VIDEO RECORDERWITH INTEL INSIDE® FROM GAMMA SOLUTION
Quick User Guide
TITANUS MX-1000 & 2000 Series
1
Before You BeginPlease follow the instructions below before you begin using the high-performance NVR system.
The following steps must be completed:
• All devices including the MX NVR, IP cameras & network PoE switch should be installed and connected properly
• A LED monitor/TV must be connected to the MX NVR for local display operation
2
NVR Start Up & LoginSwitch on the NVR system at the main electrical outlet. The MX NVR will auto start up without having to manually press
the Power button. It will continue loading and stop at NVR log in screen.
Enter the default login information given below by using the virtual keyboard and press the Login button.
User name: admin
Password: admin
The NVR Live View screen will appear with auto start recording on all IP cameras.
Figure 1.1: Login Screen
Type in default user name & password User name : admin Password : admin
Press Login button to access into NVR live View
Virtual Keyboard button
Figure 1.2: Virtual Keyboard
3
Live View ScreenOn the Live View screen, the user can control the live display video without interrupting the NVR recording.
Figure 2.1: Live View Screen
Camera List
12
3 4 5 6
Date & Time
1
2
3
4View Mode Button
Camera Status
Channel View Control
NVR System Information
5
6 PTZ Control Panel
Display Mode
Event Log & Option
4
View Mode Button
Camera Status
NVR System Information
ModeLive ViewPlayback
Configuration
Logout
DescriptionTo control the monitoring instantaneouslyTo play and export the recorded video files
To configure the camera, recording, event, management, network, quick configuration and system
To leave NVR
Icon Description
Camera nameThe name of the camera is located in the top left corner of each video window. Users can rename the camera through the following path:
Configuration > IP Camera > Camera Settings
Video compression format
M-JPEG/MPEG-4/H.264
Audio
Once the camera supports audio, the NVR shows audio in blue. And
if not, the NVR shows audio in grey
EventWhen an event occurs, the NVR shows a warning to the user as an instant alert
Recording statusThe window shows whether the camera is recording or not
Disk and CPU loading indicator shows blue when loading is 70% or under, and shows red as a warning when it reach to more than 70%.
Figure 2.2: Live View Screen
CPU Loading
Recording Disk Status
5
Channel View Control
Mode
Snapshot
Digital zoom in/out
Drop
Drop all
Add all
DescriptionTake a snapshot on the camera that you have selected. It will be saved in the folder: Public > live view > snapshot. It can be accessed through Windows networking or FTP service at file sharing service on the configuration page
Select a channel to enable digital zoom function
Drop a particular camera from monitoring
Drop all cameras from monitoring
Add all cameras for monitoring
Display Mode
NVR supports multi-display modes for monitoring. Click the icon of display mode to monitor live view. When you click a display mode, the mode icons will turn into blue.
Icon Description Icon Description
1 Screen
4 screen
9 screen
12 screen
16 screen
3/25/30/36/42/49/56/64 Screen
5+1 Screens
Sequential mode
Full screen
NxN
Playback Screen Main Functions on Playback
The maximum concurrent playback channels are 4 Cameras. USB format for backup/export must use FAT32. NTSC format is not supported.
Video Playback Speed Control
1. Stop: To clear playback videos 2. Previous frame: To show the earlier image3. Speed down: To play at slower speeds4. Play/Pause: To play video file or to temporarily stop the playback 5. Speed up: To play at a faster speed 6. Next frame: To show the next image 7. Rewind: To let video automatically wind backward
Video Playback Speed Control
1. Camera2. Data and Time3. Play Select
316 17 18 19 20 21
2322 24
2
1
Export VideoThe Export function allows users to export files to the USB driver directly. Plug in the USB drive before proceeding with the video export.
Step 1: Select camera, date and recording type
Camera
Date
Recording type
Step 2: Click the Start/Stop Export button to start exporting a video. A window will pop up for backup video confirmation.
Step 3: Press the Yes button for the video exporting to begin. If the export is successful, the message will be shown as below.