muhammad salman arshidm. raqib irshad 64- jamil park near mansoorah multan chungi lahore pakistan....

MUHAMMAD SALMAN ARSHID

Hose # 155 Gulberg Khanewal,58150, Punjab, PAKISTAN Phone: (++92) 321 6897792, e-mail: [email protected]

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Objective:

To serve in an organization that can help me nurture my professional skills by providing me enabling and challenging environment, where I can contribute by applying my knowledge.

Education:

Session Degree/Certificate Institution %age/CGPA

2007-11 B.Sc. Electronics Engineering (Cont.)

University of Engineering & Technology, Taxila. 3.52/4.0 7th Semester

2004-06 H.S.S.C. (Pre-Engineering) Govt. Islamia Degree College Khanewal 75.72 2002-04 S.S.C. (Science Group) Govt. Model High School Khanewal 74.35 Final Year Project:

Industrial Study of Distributed Control Systems Class Projects:

• Fire alarm System • Study of High Power Amplifiers • Study of Industrial Temperature Sensors • Elevator Control Using PLC

Internships:

• PEL Pvt Ltd Lahore Technical Skills:

• MATLAB, PLC, Optisystems, Verilog soft wares • AutoCAD • Microsoft Office (Word, Excel, Power Point)

Honors, Awards and Achievements:

• Champions of Football And Volley ball

Extra Curricular Activities:

• Remained member of Campus Environment Protection Society • Member of Campus Sports Committee • Lead the teams responsible for Organizing Farewell Party

M. Raqib Irshad

64- Jamil park near mansoorah Multan chungi Lahore Pakistan. Ph # 0334-9826962 e-mail: [email protected]

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Objective:


Education:

Session Degree/Certificate Institution %age / C.GPA

2007-11 B.Sc. Electronics Engineering University of Engineering & Technology, Taxila 3.39 C.GPA 7th semester

2004-06 H.S.S.C. (Pre-Engineering) Govt Science college wahdat road Lahore. 76.09%

2002-04 S.S.C. (Science Group) Govt central model school lower mall Lahore. 71.17%

Final Year Project:

Industrial Control of “Distributed Control System”. Class Projects:

• Study the High Power Amplifiers • Fire Alarm System • Study of the Temperature Sensors used in Industry • Elevator Control using PLC

Work Experience:

• PELL Pvt.Ltd Lahore Technical Skills:

• PLC, Matlab, Opto System, Verilog software’s • AutoCAD • Microsoft Office (Word, Excel, Power Point)

Professional Activities/ Experience:

• Volunteered in establishing Engineering Electronics Laboratory in the university Honors, Awards and Achievements:

• Organizing the world Environment day in the University Extra Curricular Activities:

• Lead the teams responsible for Organizing Farewell Party • Executive Member of “Engineering Forum For Advanced Research” • Media Coordinator of “Environment Protection Society ” • Executive Member of Hiking Club

ABDUL REEHAN

House no 203.Mohallah sheikh lahori chenab road Jhang Sadar, Punjab, Pakistan

Phone: (++92) 336-4214363, e-mail: [email protected] - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Objective:


Education:


2007-11 B.Sc. Electronics Engineering University of Engineering & Technology, Taxila. 2.83/4 2004-06 H.S.S.C. (Pre-Engineering) Faran Model College,Jhang 69.3 2002-04 S.S.C. (Science Group) Al-Hamd Model School Jhang Sadar 81.41 Final Year Project:

Data encryption and decryption using microcontroller 8051. Class Projects: Traffic Light Control System through PLC Work Experience:

Two months experience at Pak Elektron Limited (PEL) in Quality Control Departments.

• Transformer assembling and testing • Switchgear panels designing & assembling • Energy meter programming, assembling & calibration.

Technical Skills:

1. During 4 years university programme designing and presenting the presentations on different technical, communication topics by using MS Office & Microsoft Applications.

2. Doing a work on Matlab application like digital filter designing in digital signal processing, digital image processing course, signals and system and control system and etc

3. Have some course work on Optisystem software in optoelectronics subject. 4. Different type of programmes designing on c++


During the course of internship, apart from getting practical knowledge about my area of interest. I also attended the Youth Empowerment Programme (YEP), a full day work shop which includes “Resume Writing Skill. Interview Preparation Skill and Emotional Intelligence” at PEL.


• Lead the teams responsible for Organizing Farewell/Welcome Parties • Captain of the college cricket team.

AQEEL UR REHMAN

Hose # 36,Block # 8,housing colony Bhakkhar. , Punjab, PAKISTAN Phone: (++92) 334-7601760, e-mail: [email protected]

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Objective:

To serve in an professional and dynamic organization that can help me nurture my professional skills by providing me enabling and challenging environment, where I can contribute by applying my knowledge as well as groom my technical , interpersonal abilities.and prove my leadership qualities

Education:

Session Degree/Certificate Institution %age 2006-11 B.Sc. Mechatronics Engineering University of Engineering & Technology, Taxila

Sub campus chakwal. 81.72 (c.g.p.a)

2005-06 H.S.S.C. (Pre-Engineering) Pakistan steel cadet college karachi 74.90 2002-04 S.S.C. (Science Group) Pakistan steel cadet college karachi 82..44 Final Year Project:

Optimization and fabrication of cnc Class Projects:

Design and manufacturing of fire fighting robot Design and manufacturing of automatic two storey elevator Study of working of printers Study Project on the working. And mechanism of shaper and planner. Study Project On responsibilities of engineer o as manager, leader and

consultant. Study project of automatic concrete mixing machine. Study project of light sensors Study project of human resource management

Work Experience:

• Worked as Internee in heavy industries taxila

Technical Skills:

• CNC , PLC software • C++, matlab • Microsoft Office (Word, Excel, Power Point)


• Volunteered in establishing robotics Laboratory in the university • Visits to KSB pumps Hassan abdal, dg cement factory klar khar, master

tiles gujranwala and .kohenoor taxtile mills chakwal


Most disciplined student of year Extra Curricular Activities:

• Lead the teams responsible for Organizing Farewell/Welcome Parties • Member Dramatics society

Muhammad Asad Irshad Address: Shaheen karyana Store Ghala Mandi Sangla Hill, Nankana Sahib.Mob: +923215871005 E-mail: [email protected]

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Objective:

Seeking a job in a professional and dynamic organization where I can serve as well as groom my technical and interpersonal abilities. Areas of Interest industrial automation and control.

Education:

Session Degree/Certificate Institution %age 2007-11 B.Sc. Mechatronics Engineering University of Engineering & Technology, Taxila. 2.88gpa 2004-06 H.S.S.C. (Pre-Engineering) Govt. Islamia College Civil Lines Lahore. 62.54 2002-04 S.S.C. (Science Group) GHS no.1 sangla hill District Nankana sahib. 78.23 Final Year Project:

CNC machine. Class Projects:

• Study the construction and working of fire fighting robot • Control motor speed using PWM. • Study of microelectromechanical systems (MEMS) • Study Project team building • CNC programming, PLC, Petri net modeling.

Work Experience: Sapphire fibres dyeing unit Pvt. Ltd Lahore Technical Skills:

• CNC , PLC software • AutoCAD • Matlab • Microsoft Office (Word, Excel, Power Point)


• Volunteered in establishing robotics Laboratory in the university • Developed ability to produce reports and presentations to a professional standard.


• Remained the top student of school from 2002 to 2004 Extra Curricular Activities:

• Lead the teams responsible for Organizing Farewell • Campus Sports Committee Member

MUHAMMAD FEHZAN RASHID

Hose # 02,Block V,Street J,New-Multan,Multan Punjab, PAKISTAN Phone: (++92) 3226166857, e-mail: [email protected]

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Objective:


Education:

Session Degree/Certificate Institution %age 2007-11 B.Sc. Electronic Engineering University of Engineering & Technology, Taxila. 3cppa 2004-06 H.S.S.C. (Pre-Engineering) Govt. College Multan 72% 2001-03 S.S.C. (Science Group) F.G.Boys Public School,Multan Cantt 73.3% Final Year Project:

Real time object identification & tracking Class Projects:

• Implementation of water pollution detector • Fire fighting robot • Control motor speed using PWM. • Line Tracking Robot. • Traffic lights control using PLC..

Work Experience:

• Sui northren gas pipelines limiled. Technical Skills:

• PLC software • AutoCAD • Microsoft Office (Word, Excel, Power Point) • Optiwave • Multisim


• Member of EPS of U.E.T Taxila • Member of EFAR of U.E.T Taxila


• Got SNPL scholarship Extra Curricular Activities:

• Lead the teams responsible for Organizing Farewell/Welcome Parties • Head of Dramatics in School • Member of debating society

MUBBASHAR MEHMOOD

House # MCB 9/1264 Mohallah Basti Allah Wali Chakwal, 48800, Punjab, PAKISTAN Phone: (+92) 313 5489767, +92-543-544180, e-mail: [email protected]

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Objective:

To establish my self as an Engineer in a company with a motivating, competitive and learning environment where my technical and managerial expertise can be put to use.

Education:

Session Degree/Certificate Institution CGPA/%AGE

2007-11 B.Sc. Mechatronics Engineering University of Engineering & Technology, Taxila. 2.91 2003-06 H.S.S.C. (Pre-Engineering) Fazaia Inter College Kallar Kahar, Chakwal 70.72 2001-03 S.S.C. (Science Group) Fauji Foundation Higher Secondary School No.

1Chakwal 76.70

Final Year Project:

Implementation of DCS (Distributed Control System) through Microcontroller. Class Projects:

• Study of Control System of Pak-American Fertilizer Limited Mianwali. • Study of Electronic Fuel Injection System (EFI) of Toyota Cars. • Study of Surface Finishing Processes in Mechanical Manufacturing. • Design and Working of Auto-conveyor belt. • Design of Line Follower Robot using controller 8051.

Work Experience:

• 4 Weeks Internship in Pak-American Fertilizers Limited Mianwali (now Agritech Fertilizers)

• 8 Weeks Internship in D.G Khan Cement Company, Khairpur Plant, District Chakwal.

• 4 Weeks Internship in HMC (Heavy Mechanical Complex) Taxila. Technical Skills:

• CNC , PLC software • AutoCAD • Microsoft Office (Word, Excel, Power Point) • Keil, Proteus, MPLAB


• Volunteered in establishing Embedded System Laboratory in the university. Honors, Awards and Achievements:

• Remained the top student of school from 2000 to 2003. • Won District Chakwal Merit Scholarship in 2007.


• Lead the teams responsible for Organizing Farewell/Welcome Parties. • Leader of Final Year Project. • Head of Dramatics in School.

ZARYAB ALI MIRZA

Hose # 159,rahimabad airport road chaklala rawalpindi,pakistan Phone: (++92) 334 534 6412, e-mail:[email protected]

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Objective:


Education:

Session Degree/Certificate Institution %age 2007-11 B.Sc. Electronics Engineering University of Engineering & Technology, Taxila. 3.26/4 2004-06 H.S.S.C. (Pre-Engineering) PCIT,Islamabad 68.45 2002-04 S.S.C. (Science Group) Sir Syed Public School Tipu Road, Rawalpindi 71.64 Final Year Project:

Design and Implementation of 32 bit MIPS Processor on FPGA. Class Projects:

• Implementation of “UART Transmitter” on FPGA. • Design and Implementation of “8 bit Processor” on FPGA. • Design and implement “Line Following Robort”. • Making a “stop watch” on FPGA kit using ModelSim and Xilinx. • Designed “Automatic Cooling System” using Microcontroller 8051. • Designed “Door lock” using Microcontroller 8051. • Design and implement “Electronics Stethoscope”. • Regulated DC Power supply.

. Work Experience:

• PTCL Exchange, Rawalpindi. Languages :

• C++ • Verilog HDL • Assembly • Matlab programming

Tools:

• Xilinx • Keil • Proteous • ModelSim • Matlab • OptiSystem


• Take 1st position in singing competition. • Member of school cricket team.

MUHAMMAD FARHAN

House # MCB 9/1143 Mohalla Sargojra Gharbi St # 3B Chakwal, Punjab, PAKISTAN Phone: (++92) 331 5791510, e-mail: [email protected]

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Objective:


Education:

Session Degree/Certificate Institution %age 2007-011 B.Sc. Electronics Engineering University of Engineering & Technology, Taxila. 3.92cgpa 2005-06 H.S.S.C. (Pre-Engineering) Govt. College Chakwal. 78.81% 2003-04 S.S.C. (Science Group) Fauji Foundation School Chakwal. 75.88% Final Year Project:

Design and Implementation of GSM Based Weather Station. Class Projects:

• Developed a Line Follower Robot using Atmel 89c51 micro-controller. (Microprocessor).

• Designed Electronic Stethoscope using OP Amplifiers. • Made various projects on FPGA. • Designed FM transmitter . • Implementation of wireless transmission on Electronic stethoscope. • PLC based Elevator. • Design and implementation of GSM based weather station

Work Experience:

• PTCL • NTC.

Technical Skills:

• PLC software • AutoCAD • Circuit Maker and Electronic Workbench • Lab view • Matlab • Optiwave • Microsoft Office (Word, Excel, Power Point)


• Member of Electronic forum for advanced research and studies UET Taxila. • Member of auditorial board of Campus magazine Almohandis.


• Listed five times on the Dean's Merit List. • Ranked on top in the 2007 session with cgpa of 3.92/4. • Got 1st position in Project competition on Wireless Electronic stethoscope • Participated in 2nd all Pakistan Electronics OLYMPIAD held at GIKI.


• Head of Dramatics in School • Member of campus poetic society.

Address

Near Al-Noor Mosque, Moh. Badar Din, Teh. Sarai Alamgir, Distt. Gujrat, Punjab, PAKISTAN

Profile

Objective

Seeking a challenging career opportunity in a dynamic organization, which offers diverse job responsibility in Electronics engineering

and will fully utilize both my technical and managerial abilities and also I can work in teamwork environment to achieve organizational

vision. Availability Available for full time employment.

Education

2007 to 2011 Bachelor in Electronics Engineering University of Engineering & Technology Taxila

3.51 CGPA

2004 to 2006 F.Sc. in Pre-Engineering F.G. Inter college, Jhelum Cantt, Pakistan 69.63%

2002 to 2004 Matric in Science (Phys. Chem. Math & Bio) F.G Boys Public School Jhelum Cantt, Pakistan 71.29%

Projects

Final Year Project

PLC BASED FUEL CONTROL OF BURNER AND SPEED CONTROL OF

ROTARY KILN. (A cement industry process in which our goal is to control the functions with PLC Programming and also imminent of components used.)

Class Projects

Study, Design and Implementation of FM Radio Receiver Design of Water Level Indicator Design and implementation of Variable Power Supply Design Hardware and Control of Traffic Light Signals Using PLC PLC Programming

Muhammad Haris Zafar (Electronics Engineer) sS/O Mirza Zafar Mehmood

Citizenship : Pakistani Date of Birth : 10 January 1989

Contact Cell : 0332 5353144

E-mail : [email protected]

Key Skills Proficient or familiar with a number of tools, programming languages, concepts and

technologies including

Programming Languages

MATLAB C++ Verilog HDL Assembly

Engineering Software’s

WinPro Ladder CXONE V 1.1 Auto CAD 2004 Proteous (PCB Design)

Others MS Office Photo Impact Software

Professional Activities/ Experience

Management Experience in Organizing Events and Functions Teaching Experience

Extra Curricular Activities

Anchor (throughout Academic Carrier) Part of the team responsible for Organizing Welcome Party Vice Incharge in Dramatic Society Executive member in Sports Executive member in Environmental Protection Society Good Player of Football

Languages

English (proficient in speaking, reading & writing)

Urdu (native)

CCUURRRRIICCUULLUUMM VVIITTAAEE

Jamal Abdullah com.hotmail@47boy_decent, [email protected]: ailEm

Chakwal. Choa Saiden Shah Distt. Waulah Teh. O.P@ village : Postal Address : +92-543421738 : +92-3445373528

CAREER OBJECTIVE

To seek a technical career position within an organization, where professional education, & my personal abilities would be an advantage to the growth of the organization and me, which would help me to learn and progress to achieve common objectives and enhance my potential for senior technical / management position

eventually.

EDUCATION

BE (MECHATRONICS) UET TAXILA 3.15 CGPA SESSION (2007-2011)

F.S.c (Pre-Engg.) FBISE Passed Session (2004-2006)

Matriculation BISE Passed Session (2002-2004) INDUSTRIAL EXPERIENCE

♦ 4 Weeks Internship with Bestway Cement Ltd.(Chakwal), Pakistan ♦ 4 Weeks Internship with D.G Khan Cement Ltd.(Chakwal), Pakistan ♦ 6 Weeks Internship with ICI Khewra, Pakistan ♦ Industrial tour at Master Tiles Gujranwala, Pakistan ♦ Industrial tour at POL (Pakistan Oil Field) Pendori, Pakistan ♦ Study project at ICI Ltd. Khewra, Pakistan

CERTIFICATE AND TRANNING

♦ 2nd prize in Project Exhibition held by EFARS at UET Taxila in 2008. ♦ 2nd prize in Project Exhibition held by EFARS at UET Taxila in 2010.

AREA OF INTEREST

♦ Instrumentation ♦ Electromechanical control ♦ Programming

MAJOR SUBJECTS

♦ Engineering Management ♦ Engineering Mechanics( Static, Dynamic) ♦ Engineering drawing ♦ Mechanics of Material ♦ Theory of Machine ♦ Machine Design ♦ Machine Tools ♦ Workshop Technology ♦ Mechatronics System Design ♦ Special Topics In Mechatronics (image processing, neural

networks) ♦ Industrial Control & Manufacturing Systems (PLC) ♦ Instrumentation & Feedback Control Systems ♦ Hydraulics & Pnemautic Systems ♦ Electronics Devices ♦ Microcontroller Interfacing & Programming (8051, using C-

language) PROJECTS

♦ Automation of water purification plant using PLC(Programmable

logic controller) (Final Year project)

♦ Design & Actuation Of Two-finger Mechanical Gripper ♦ Automatic Car Barrier

SKILLS

♦ MATLAB ♦ Proteus ♦ PLC Programming Software’s (PSIM, CX Programmer) ♦ MS Word, MS Excel, MS Power point

PERSONAL PROFILE

♦ Energetic and willing to take challenges and meet Challenges. ♦ A good team member, ability to lead, regarding meeting

deadlines. ♦ Try to build on the basic concept and go for an innovation if the

situation demands. ♦ Willing to implement my knowledge to the best interest of your

organization. ♦ Spread my knowledge to others as I can.

LANGUAGES

♦ Urdu ♦ English ♦ Punjabi

HOBBIES

♦ Computer ♦ Internet ♦ Reading Books

KKhhaawwaarr JJaavveedd Cell No # 0334-8763680 Add: P/O Waulah Tehsil Choa Shaidin Shah Distt Chakwal E-mail: [email protected]

OObbjjeeccttiivveess To be given a chance to exhibit my skills as a Mechatronics Engineer and use my knowledge as

a positive influence with reputable company. Willing to implement my knowledge to the best interest to the organization. willing to take challenges and meet Challenges. Try to build on the basic concept and go for an innovation if the situation demands. A good team member, ability to lead, regarding meeting deadlines.

EEdduuccaattiioonn

2007-2011 | BSc Mechatronics Engineering (CGPA up to 7t h Semester = 3.35) University Of Engineering & Technology Taxila Sub Campus Chakwal 2005 | FSc Pre Engineering (1s t div ision ) (66.09%) Fazaia Inter College Kallar Kahar 2003 | S.S.C Science Group (1s t div ision ) (69.05%) Board Of Intermediate And Secondary Education Rawalpindi

AAcchhiieevveemmeennttss Final Year | Project Distributed Control System (DCS) Selection of controllers and there programming Design of communication system Design of HMI (Human Machine Interface) for the whole system 3r d year | Class Project Self Controlled Automatic Guided Vehicle An automatic vehicle that can sense load or object placed on it, and can automatically

deliver that part in different industrial zones by following a track. Mechanical design of the vehicle Selection and design of sensors and actuators PCB design 2n d year | Class Project Automatic conveyer belt for material handling Automatic conveyer belt that starts only when the part is present on the belt and convey

that part from one end to another. Design of mechanical structure of the conveyer Design of sensors and actuators

TTrraaiinniinngg 8 Weeks | Internship At D.G.Khan Cement Company Limited (Khairpur Project) Pakistan Instrumentation workshop activities Study of control system and PLC

SSkkiillllss

• Software Proficiency:

• MATLAB • KEIL 8.0 (C compiler for embedded systems) • Labview (National Instruments) • Logixpro500 (Ladder Logic Programmer) • Proteus (Electronic Simulator) • Micro C (C compiler for embedded systems) • CNC Simulator • MP LAB (Assembly compiler for embedded

systems) • PSIM (PLC Simulator) • Electronic work bench • VisObjNet20a (Petri Net Simulator)

• Programming skills:

C\C++ , Mat lab , Assembly language ,PLC Ladder Logic Programming

• Languages: Punjabi , Urdu , English

MUNIB AFZAL

Chak # 261 / p ,tehsil Sadiqabad distt. Rahim yar khan,, Punjab, PAKISTAN Phone: (++92) 300 8772881 e-mail: [email protected]

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Objective:


Education:

Session Degree/Certificate Institution %age 2007-11 B.Sc. Mechatronics Engineering University of Engineering & Technology, Taxila. 3.22

C.GPA 2005-06 H.S.S.C. (Pre-Engineering) MTB higher secvondary school sadiqabad 76.36 2002-04 S.S.C. (Science Group) Shama public school bangla manthar 75.52 Final Year Project:

Optimization of low cost CNC . Class Projects:

• Design of fire fighting robot • Control motor speed and direction • Make a Keypad in PIC controller. • Line Tracking Robot. • CNC programming, PLC, Petri net modeling.

Work Experience: • Fatima fertilizer company limited .

Technical Skills:

• CNC , PLC software • AutoCAD, matlab • Microsoft Office (Word, Excel, Power Point)


• Volunteered in establishing Engineering embaded system Laboratory in the university

• Teaching Experience in City School (six months) Honors, Awards and Achievements:

• Best story writer award for university magazine • Best sports man of year • Remained the top student of school from 2001 to 2003



HUSNAIN MURAD

Village Jajjay p/o Kulluwal The.Sambrial Dist. Sialkot Punjab, PAKISTAN Phone: (++92) 333-8719396, E-mail: [email protected]

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Objective:

To be a successful member of corporate team in dynamic organization where my expertise in any field where I contribute essentially in achieving organization

aims is being utilized. Education:

Session Degree/Certificate Institution Result 2007-10 B.Sc. Electronics

Engineering University of Engineering & Technology, Taxila.

3.31

2003-05 H.S.S.C. (Pre-Engineering) Govt.Jinnah Islamia College Sialkot 812 2001-03 S.S.C. (Science Group) Govt.H/S Kulluwal Sialkot 612 Final Year Project:

WCDMA based transmitter and Rake receiver using Matlab 7.09 and Simulink for simulation and implementing FPGA based hardware.

Class Projects:

• Study the interfacing of LCD with PIC microcontroller. • Study and hardware Implementation of digital to analog

converter • Hardware implementation of Field strength meter. • Traffic control system using P.L.C controller. • Detail study of CDMA technologies +mobile communication.

Work Experience:

Worked at ATC Department, Sialkot International Airport for 3 months. Technical Skills:

• Cisco Packet Tracer • Matlab 7.09. • Microsoft Office (Word, Excel, Power Point) • Optisystem • Electronic Workbench

Extra Curricular Activities/ Experience:

• Member of Engineers Forum For Advance Research. • Member of Environment Protection Society. • Member of Dramatic Society. • Member of Blood Donation Society.


• Awarded a certificate by ITALIAN company during installation at Sialkot international airport

• Cisco Certified Networking Authentication(4 months) from TNA Islamabad, Master in configuring all types of switches and routers )

Reference: May produce if organization demanded.

M U H A M M A D W A S E E M MECHATRONICS ENGINEER Street # 22 ward # 5 Kabirwala.

District Khanewal. [email protected] +92 0346 5737870, 065 2014321

NIC No: 36102-9823303-5 Date of birth: 07-02-1987

OBJECTIVE:

To be the part of a challenging professional environment where I can effectively utilize and

enhance my innate capabilities and can enhance my theoretical knowledge through practical experience.

EDUCATION:

Session Degree/Certificate Institution %age 2005-09 B.Sc. Mechatronics Engineering University of Engineering & Technology, Taxila. 72.67 2002-05 H.S.S.C. (Pre-Engineering) Govt. College Kabirwala. 73.36 2000-02 S.S.C. (Science Group) Govt. High School, Kabirwala. 82.58

MAJOR SUBJECTS:

• Industrial Automation and Robotics • Mechatronics and System Dynamics • Feedback Control Systems • Mechatronics Instrumentation • Electrical Machines and Drives • Micro Controllers and Processors • Programming C++

FINAL YEAR PROJECT:

Optimization of EFI Engine in Motor Bikes:

With the aim of fuel Optimization (meter and measure the air and fuel

flow into the engine cylinders) Objective:

• To study flow velocity and mass flow rate distribution through different runners at unsteady conditions.

• Compare the Engine Analyzer Pro data with experimental data. • Compare the Fuel Injector Calculator data with experimental

data. • To suggest for performance improvement based on the analysis

results.

Methodology: • Study and compare the principles of both Carburetor and EFI engines. • Study and compare the hardware of both Carburetor and EFI engines.

(Study of different Sensors necessary to convert Carburetor into EFI kit.) • Collection of the data of Atlas Honda CG 125 and put the

specification in software. • Calculate the performance measure of motor cycle and put the

data in software for modeling and graphing. • Obtaining results using the solvers Engine Analyzer Pro ,

Fuel Injector Calculator • Compare the both software data and comments about

difference.

CLASS PROJECTS:

• CNC Programming, PLC(logics pro), Petri Net Modeling. • Automatic Opening and Closing of Door. • Control Motor Speed Using PWM. • Make a Keypad In PIC Controller. • Line Tracking Robot.

WORK EXPERIENCE:

Two Month Internship in Nestle Pakistan Ltd Kabirwala Factory.

(From 28 Aug 2008 to 28 Oct 2008) During this period,

• I gain a sound knowledge about variety of Instruments such as Temperature, Pressure, Flow and Level measuring Sensors and Switches.

• Learn to Calibrate these Instruments. • Final Report and Suggestions to improve the performance of these

Instruments.

AREAS of INTEREST:

• Industrial Robotics and Factory Automation using PLC’s. • Keenly interested in SCADA and DCS in “PROCESS INDUSTRIES”

REFERENCE:

• Shall be furnished on demand

Shoukat Hussain

Mouza Rang Ali post office Lar,Tehsil and District Multan, Punjab, Pakistan Phone: (++92) 345-7353116, e-mail: [email protected]

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Objective:


Education:


2007-11 B.Sc. Electronics Engineering University of Engineering & Technology, Taxila. 3.38/4 2004-06 H.S.S.C. (Pre-Engineering) Govt. college Bosan road Multan 76.6 2002-04 S.S.C. (Science Group) Govt. Higher secondary school Lar, Multam 75.8 Final Year Project:

Distributed control system (DCS). Class Projects: Traffic Light Control System using PLC Work Experience: Six weeks internship at National Telecommunication Corporation (NTC) Lahore 1. Orientation in Data Networks NTC Lahore 2. Orientation in Switching NTC Lahore Technical Skills:

5. During 4 years university programme designing and presenting the presentations on different technical, communication topics by using MS Office & Microsoft Applications.

6. Doing a work on Matlab application like digital filter designing in digital signal processing, digital image processing course, signals and system and control system and etc

7. Have some course work on Optisystem software in optoelectronics subject. 8. Different type of programmes designing on c++


I have been member of school debating society. Extra Curricular Activities:

• Lead the teams responsible for Organizing Farewell/Welcome Parties • Captain of the school cricket team.

Sultan Fateh Ali Khan

Khumani Chowk, Tatral Road,Moh. Kot Ganish,Chakwal, Punjab, PAKISTAN Phone: (++92) 345 577 3877, e-mail: [email protected]

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Objective:


Education:

Session Degree/Certificate Institution %age/C.G.P.A

2007-11 B.Sc. Mechatronics Engineering University of Engineering & Technology, Taxila. 2.79 2004-06 H.S.S.C. (Pre-Engineering) K.K. ScienceH\S School, Kallar Kahar, Chakwal 71.36 2002-04 S.S.C. (Science Group) Govt. High School No. 1 Chakwal 70.35 Final Year Project:

Design and Implementation of Distributed Control System. Class Projects:

• Study the working of Electronic Power Stearing. • Design of Auto-Start Conveyor for material transportation. • Control motor speed using PWM. • Serial Communication in PIC controller. • Line Tracking Load Carrying Robot. • CNC programming, PLC, Petri net modeling.

Work Experience:

• Internship at D.G. Khan Cement Factory Khairpur , Chakwal. Technical Skills:

• CNC , PLC softwares • AutoCAD • Microsoft Office (Word, Excel, Power Point)


• Volunteered in establishing Embaedded Systems Laboratory in the university • Quaid.e.Azam Scout.


• Player of Cricket, Football, Table Tennis at School, College and University levels

WAQAS ASHRAF

H# 269 E-Block Tajpura Scheme, Lahore, Punjab, PAKISTAN Phone: (++92) 0333 4657860, e-mail: [email protected]

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Objective:

To pursue a career in an excelling organization to groom my technical, management and interpersonal abilities and render all possible services in my capacity to the firm.

Education:

Session Degree/Certificate Institution %age 2005-09 B.Sc Electronics Engineering University of Engineering & Technology, Taxila. 2.85 2003-05 H.S.S.C. (Pre-Engineering) Govt. Islamia college Railway Road, Lahore 1Division 2001-03 S.S.C. (Science Group) Minhaj-ul-Quran model School, Lahore 1Division Final Year Project:

Industrial automation using programmable logic controller (PLC). Class Projects:

• Traffic control signals INTERNSHIP Experience:

• Pak-American Fertilizer, Iskandarabad • Packages Limited, Lahore • Gain Electrical & Control systems

Technical Skills:

• PLC simulator software, electronics workbench • Microsoft Office (Word, Excel, Power Point, Visio), Photoshop, Paint ShopPro.


During my stay at GAIN Electrical & Control Systems, I have participated in • OHSAS (Occupational Health & safety)

Two Days workshop by Pakistan Engineering Council (PEC)

• ISO 9001:2000 (Quality management systems) • ISO 14000 (Environmental management systems) • ISO 17025 (Laboratory management systems)


• Voluntarily organized Blood donation camp organizing at campus • Creative member in University Dramatic society • Exective member EFARS


• Participated in inter university competitions • Organizers in university Farewell/Welcome Parties • Member of Dramatics & Poetic society in university

Abdul Rahman

Hose # 5 St. # 1 Javed Town Okara, Punjab, PAKISTAN Phone: (++92) 321 5465253, e-mail: [email protected]

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Objective:

To contribute towards the growth of a prestigious organization in the fields of Quality, Environment, Economy, Health, Safety & Security with help of engineering knowledge that I have attained during my academics.

Education:

Session Degree/Certificate Institution %age/C.G.P.A 2007-11 B.Sc. Mechatronics Engineering University of Engineering & Technology, Taxila. 3.78 c.g.p.a 2004-06 H.S.S.C. (Pre-Engineering) D.P.S & C Okara 73% 2002-04 S.S.C. (Science Group) Govt. High School 18 G/D Okara 78% Final Year Project:

Automation of Tanning Process via PLC & Wireless Control Room Class Projects:

• PCB implementation with DC power supply • Light Seeking Robot (LDR & Relay implementation) • Automatic car washing workshop (Microcontroller based workshop) • Industrial Study Project at Packages Lahore • CNC programming, PLC, Petri net modeling.

Work Experience:

• 6 weeks internship in Atlas Honda Ltd Lahore • 4 weeks internship in PakArab Fertilizer Multan

Technical Skills:

• CNC , PLC , Matlab , Cam Spectra ,Micro C, Ares Software • AutoCAD • Microsoft Office (Word, Excel, Power Point)


• Volunteered in establishing Robotics & Automation Laboratory in the university • Member of Team for PEC visit


• Position Holder Scholarships (University) Two 1st Positions (5th & 6th Semester) Three 2nd Positions (3rd,4th,7th Semester)

• University Quiz Competition Winner Extra Curricular Activities:

• Surfing Web & Interacting People

• Registration Committee In charge of EFARS Society in University • Ex CR of class

WAQAR SHABBIR

MCB-6/1087 MOH MINHAS ABAD STREET NO. 2 NEAR SARPAK CHAKWAL Email: [email protected] , Phone :+92-333-5906451

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Objective: I’m looking to enhance and implement my professional, managerial and technical skills to excel in the creative, innovative and challenging environment. Education:

Session Degree/Certificate Institution %age 2007-11 B.Sc. Mechatronics Engineering University of Engineering & Technology, Taxila. 3.08 CGPA 2004-06 H.S.S.C. (Pre-Engineering) Fazaia inter college Kallar Kahar Chakwal. 64.91 2002-04 S.S.C. (Science Group) Fazaia inter college Kallar Kahar Chakwal. 71.65 Final Year Project:

RENEWABLE ENERGY (Vertical axis wind turbine) Class Projects:

• Security alarm system • Line following robot • Control motor speed using PWM. • Controller based robotic arm. • CNC programming, PLC, Petri net modeling. • Process industry (Spinning mill) study project • Project Management

Work Experience:

• PAC Kamra • Toyota Azad Motors Mirpur Azad Kashmir

Technical Skills:

• CNC , PLC software, Auto cad, Mat lab ,C++ • Pspice, Keil, EWB, Proteus, Livewire • Microsoft Office (Word, Excel, Power Point


• President of Chakwal engineering Students Federation • President Engineers Hiking Club. • Executive member Blood Donation Society. • Executive member Dramatic and cultural society

Personal Interests

• Cricket |Badminton | Bridge, chess | International current affairs

MUHAMMAD FAISAL

Awan Kot, Near Charagh Masjid, Mohallah Alamabad,Behal Road, Bhakkar. - 30000, Punjab, PAKISTAN

Phone: (++92) 333 940 8796, e-mail: [email protected] - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Objective:

To work in organizations under professionals & to cooperate with them in order to groom self abilities & capabilities, to ensure perfection in all kinds of conditions for future opportunities.

Education:

Session Degree/Certificate Institution %age 2007-11 B.Sc. Mechatronics

Engineering* (8th Semester) University of Engineering & Technology, Taxila. -------

2004-06 H.S.S.C. (Pre-Engineering) Government College For Boys Bhakkar 69.9% 2001-03 S.S.C. (Science Group) District Public School Bhakkar 83% Final Year Project:

Development of Automobiles as a Mechatronic System (Hybrid Cars). Class Projects:

• Object Counter using Microcontroller (8951C). • Automated Object Security System. • DC power Supply. • PCB Designing. • Study Of UCAV (Unmanned Combat Air Vehicle).

Internships:

• Descon Engineering Limited , Lahore. • D.G.Khan Cement Kallar Kahar.

Technical Skills:

• PSIM, Cnc Simulator, Petri-Net Modeling • Primavera Project Planner (P3 & P6). • Matlab, AutoCAD. • Microsoft Office (Word, Excel, Power Point).


• Volunteered in establishing Embedded System Laboratory & Robotics Laboratory in the university

• Teaching Experience in City School (One Year) Honors, Awards and Achievements:

• Best Student in English Grammar in Matric. • Ist prize in District Science Competition in HSSC. • Remained the top student of school from 2001 to 2003


• Vice Incharge Sports in University. • Advisor Sports University. • Vice Captain University Football Team (2 years Champion) • Captain Volley Ball Team (2 Years Champion) • Member Debating society & Poetic Society

Muhammad Imran Khan

Village Dhoke Gujjar p.o box Ara the Choa Saidan Shah dist Chakwal, Punjab, PAKISTAN Phone: (++92) 321 522 7275, e-mail: [email protected]

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Objective:


Education:

Session Degree/Certificate Institution %age/GPA 2007-11 B.Sc. Mechatronics Engineering University of Engineering & Technology, Taxila. 2.91 CGPA 2004-06 H.S.S.C. (Pre-Engineering) F.G. Sir Syed College The Mall Rawalpindi Cantt. 68.91 2002-04 S.S.C. (Science Group) Govt High School Ara Chakwal. 80.35 Final Year Project:

Renewal energy system (Wind Turbine). Class Projects:

• Study the construction and working of Gyroscope. • Motors Interfacing. • Controller base Robotic Arm. • Line Following Robot. • CNC programming, PLC, Petri net modeling.

Work Experience:

• ICI Soda Ash, Jhelum. • Fauji fertilizer company,Goth machhi. • DG Cement Limited,Chakwal. • Bestway Cement Limited,Chakwal.

Technical Skills:

• CNC , PLC software • AutoCAD • Microsoft Office (Word, Excel, Power Point)

Professional Activities/ Experience: Honors, Awards and Achievements:

• Remained the top student of school from 2002 to 2004. • Best semester project in the class.


• Executive member of Engineering Hiking Club.

S M HUSSAIN KIRMANI

518 Nargis block Allama Iqbal town Lahore Phone: (++92) 3224564326, e-mail: [email protected]

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Objective:


Education:


CGPA 2003-06 H.S.S.C. (Pre-Engineering) Aitchison College Lahore. 75% 2001-03 S.S.C. (Science Group) Aitchison College Lahore. 77.05% Final Year Project:

INTELLIGENT LIVING ROOM. Class Projects:

• Automatic light control. • James bond gadgets car project. • CNC programming, PLC, Petri net modeling. • Study project of cruise missiles. • Study project of engine assembly plant

Work Experience:

• Millat tractors limited Lahore

Technical Skills:



• Volunteered in Blood donation camp. Honors, Awards and Achievements:

• 1st position in class 8


• Member of cricket Team.

MALIK OMER TAHIR

Molladad Coloney Civil Line near rest house Jail Road Gujrat Pakistan Phone: (++92) 3137882925, e-mail: [email protected]

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Objective:


Education:


CGPA 2003-06 H.S.S.C. (Pre-Engineering) Govt.Zamindara Degree College Gujrat. 74% 2001-03 S.S.C. (Science Group) Municipal Model High School for boys Gujrat 84% Final Year Project:

Automatic Sorting Transportation And Storage. Class Projects:

. • Auto Guided Vehicle (AGV). • Box Sorting Robot • Water Level Sensing • CNC programming, PLC, Petri net modeling.

Work Experience:

• Service Industries Gujrat • Master Tiles Gujranwala

Technical Skills:



• Lead the teams responsible for Sports Committee of University. • Participated in Dramas, Skits in University


• 2nd Position Holder in 6th Semester in University. • Awarded 2nd position in project competition in UET Taxila.


• Captain of University Football Team. • Member of Dramatic society

AAMER MEHMOOD

Mohallah Faridia post office Gogran District Lodhran Punjab, PAKISTAN Phone: (++92) 3464934559, e-mail: [email protected]

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Objective:


Education:

Session Degree/Certificate Institution %age 2007-11 B.Sc. Mechatronics Engineering University of Engineering & Technology, Taxila. 3.08 CGPA 2003-06 H.S.S.C. (Pre-Engineering) Sadiq Egerton College Bahawalpur 69.09 2001-03 S.S.C. (Science Group) Govt. High School, Gogran (Lodhran) 76.50 Final Year Project:

Design And Implementation of Automatic Bottle Filling Plant Controlling through SCADA System

Class Projects:

• Design and Implementation of Automatic Door Opening And closing. • Automatic Water Level Detection.. • Line Tracking Robot. • CNC programming, PLC, Petri net modeling.

Work Experience:

• Engro Fertilizers Company Daharki Technical Skills:

• CNC , PLC software • AutoCAD • Microsoft Office (Word, Excel, Power Point) • Matlab • Protious


• Volunteered in establishing Engineering Mechanics Laboratory in the university • Member of Environmental Protection Society(EPS) in the university


• Awarded 3rd position in projects competition at UET • Awarded 2nd position in debating competition at UET

Curricular Activities:


SAJJAD ALI

Chak#455/E.B Tehsil Burewala District Vehari - 61010, Punjab, PAKISTAN Phone: (++92) 3347197964, e-mail: [email protected]

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Objective:


Education:


CGPA 2003-05 H.S.S.C. (Pre-Engineering) Govt.Degree College Burewala. 71.72 2001-03 S.S.C. (Science Group) Chak#455/E.B Burewala (Vehari). 74.47 Final Year Project:

Design and Implementation Of Automatic Bottle Filling Plant With SCADA. Class Projects:

• Study the construction and working of Boiler. • Automatic Door Opening And Closing. • Auto Guidid Vehicle (AGV). • Control motor speed using PWM. • Line Tracking Robot. • CNC programming, PLC, Petri net modeling.

Work Experience:

• Pakistan Aeronetical Complex (PAC) KAMRA. Technical Skills:



• Volunteered in establishing Engineering Mechanics Laboratory in the university • Lead the teams responsible for Sports Committee Of University.


• 3rd Position Holder in 7th Semester in University. • Awarded 3rd position in project competition in UET Taxila. • Remained the top student of school from 2001 to 2003


• Lead the teams responsible for Sports Committee Of University. • Captain of University Football Team. • Member of Dramatic society

Saeed Akhtar

Near Hafiz General Store,27 Area, New Gudwal ,Wah Cantt –Punjab, PAKISTAN Phone: (++92) 333 5940928, e-mail: [email protected]

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Objective:


Education:

Session Degree/Certificate Institution %age 2005-09 B.Sc. Mechatronics Engineering University of Engineering & Technology, Taxila. 94.00 2003-05 H.S.S.C. (Pre-Engineering) MRF Degree College, Kamra 68.04 2001-03 S.S.C. (Science Group) PAF Degree College Rafiqui, Shorkot Cantt 78.05 Final Year Project:

Design and Implementation of Surveillance Mission Robot using Motion Planning Techniques.

Class Projects:

• Design of Automated Guided Vehicle (AGV). • Design of Fire Alarm using Logic gates. • Control motor speed using PWM. • LCD interfacing using 89C51 Micro-controller. • Line Tracking Robot. • CNC programming, PLC, Petri net modeling.

Technical Skills:



• Internship at Heavy Mechanical Complex-3, Taxila • Internship at Oil & Gas Training Institute (OGTI), Islamabad • Internship at Capital Engineering & Services, Islamabad


• 1st Prize in Project Exhibition in University. • Merit Scholarship Holder During Engineering


• PC Games • Cricket • Hockey

Muhammad Nauman Habib

Hose #E-88,Street no.5, Mohalla Chaudhry Hayat Baksh, Near Alam Khan Road, Rawalpindi – 46000,Punjab, PAKISTAN

Phone: (++92) 331 504 9661, e-mail: [email protected] - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Objective:


Education:

Session Degree/Certificate Institution %age 2005-09 B.Sc. Mechatronics Engineering University of Engineering & Technology, Taxila. 78.75 2003-05 H.S.S.C. (Pre-Engineering) F.G. Degree Quaid-e-Azam College, Chaklala

Scheme3, Rawalpindi Cantt. 72.09

2001-03 S.S.C. (Science Group) Capital Public School, Rawalpindi 77.52 Final Year Project:

Design and Implementation of Surveillance Mission Robot using Motion Planning Techniques.

Class Projects:

• Design of Automated Guided Vehicle (AGV). • Design of Fire Alarm using Logic gates. • Control motor speed using PWM. • LCD interfacing using 89C51 Micro-controller. • Line Tracking Robot. • CNC programming, PLC, Petri net modeling.

Technical Skills:



• Internship at Heavy Mechanical Complex-3, Taxila • Internship at Oil & Gas Training Institute (OGTI), Islamabad • Internship at Capital Engineering & Services, Islamabad


• 1st Prize in Project Exhibition in University. • Benolvent Fund Scholarship during 3rd year of Engineering


• PC Games • Cricket • Hockey

muhammad salman arshidm. raqib irshad 64- jamil park near mansoorah multan chungi lahore pakistan....

Documents