monthly notifications register · information procedure page 2 monthly notifications register...

Information procedure

Monthly Notifications Register

Notifications registered at CCMC from 2013-05-01 to 2013-05-31

Register issued on : 2013-06-07

A list of subsectors can be found at the end of this document.




Sector A : SERVICES


Subsector A04: TRANSPORTATION SERVICES

Subsector : A04 Registration Date : 2013-05-28Organization : SNV Draft Issue Date : 2013-05-27Country : Switzerland Latest Date for Comments : 2013-07-05Project ID : CH130012/0001 Draft for public enquiryICS : 03.220.01National Ref : SN 671001Title : Public transport and rail freight

Basic Standard and Glossary

Relatedness :National : REV/AMD SN 671001 (2006)

** End of Subsector **

Subsector A06: BUILDING AND CONSTRUCTION SERVICES

Subsector : A06 Registration Date : 2013-05-14Organization : SIS Draft Issue Date : 2013-05-13Country : Sweden Latest Date for Comments : 2013-07-13Project ID : 00825630/0001 Project EstablishedICS : 13.060.30National Ref : 825630Title : Small wastewater systems for up to 50 PT - Microorganism reduction unitsScope : This standard specifies requirements, test methods, marking and evaluation of performance

for a microorganism reduction process for small scale domestic wastewater treatment with or without WC. The process can be integrated in a product according to SS-EN 12566-3, -6 and -7, and filterbeds, or as a stand-alone product after such units.

Relatedness :National : New

Subsector : A06 Registration Date : 2013-05-30Organization : SNV Draft Issue Date : 2013-05-28Country : Switzerland Latest Date for Comments : 2013-07-04Project ID : CH130013/0001 Draft for public enquiryICS : 91.010.20National Ref : SIA 126Title : Price changes due to inflation in planning services: Method using sliding scale price

formula



Subsector A11: SAFETY AND SECURITY

Subsector : A11 Registration Date : 2013-05-22Organization : TSECountry : TurkeyProject ID : tst12817/0001 Project EstablishedICS : 03.080.30, 29.130.01National Ref :

Title : Authorized services for electric panels -RulesScope : This standard includes rules for operating, physical characteristics, managership, technical

equipment, personnel specifications and certification of Competent services for electric panels.



Subsector A99: UNDETERMINED

Subsector : A99 Registration Date : 2013-05-27Organization : UNICountry : ItalyProject ID : 98000240/0001 Project EstablishedICS : 03.080.30National Ref : U98000240Title : Determination of the market value of properties Scope : The norm is aimed to defining the criteria for the estimation of market value of the

properties based on the definition provided by the Directive 2006/48/EC of the European Parliament and of the Council, implemented by the Law of 23 February 2007, n. 15 (published in the Official Gazette no. 46 of 24 February 2007), which specifies that «Market value» means the estimated amount for which the property should exchange on the date of valuation between a willing buyer and a willing seller in an arm's-length transaction after proper marketing wherein the parties had each acted knowledgeably, prudently and without compulsion. The market value shall be documented in a transparent and clear manner.


Subsector : A99 Registration Date : 2013-05-27Organization : UNICountry : ItalyProject ID : 98000250/0001 Project EstablishedICS : 03.080.30National Ref : U98000250Title : Property valuer - Definition of the requirements of knowledge, skills and competenceScope : The norm is aimed to defining the criteria for the requirements of knowledge, skills and

competence of the property valuer


Subsector : A99 Registration Date : 2013-05-27Organization : AFNORCountry : FranceProject ID : FA182734/0001 Project EstablishedICS :National Ref : PR XP X50-831-2Title : Beauty and wellness treatments - Part 2: Specific requirements on the quality of service

for nail design and prosthetic care


Subsector : A99 Registration Date : 2013-05-27Organization : AFNORCountry : FranceProject ID : FA182735/0001 Project EstablishedICS :National Ref : PR XP X50-831-3Title : Beauty and wellness treatments - Part 3 : Specific requirements on the quality of service

for eyelash care and design


Subsector : A99 Registration Date : 2013-05-17Organization : TSECountry : TurkeyProject ID : tst13346/0001 Project EstablishedICS : 03.080.10National Ref :Title : Work Places –General RulesScope : This standard includes the general rules for structural characteristics, management, storage

and personnel characteristics of work places.



** End of Sector **




Sector B : BUILDING AND CONSTRUCTION


Subsector B01: FIRE PROTECTION

Subsector : B01 Registration Date : 2013-05-24Organization : LVSCountry : LatviaProject ID : 00024006/0002 Draft for public enquiryICS : 13.220.01National Ref : prLVS 334Title : Specialized and technical equipment for fire fighting and rescue work

Scope : This Standard specifies the requirements for assembly of special and technical equipment

and facilities necessary for fire fighting and rescue work considering the size of the substantive and territorial units of the State Fire and Rescue Service.


Subsector : B01 Registration Date : 2013-05-21Organization : ASICountry : AustriaProject ID : 00025697/0001 Project EstablishedICS : 13.220.99, 13.340.60National Ref : ÖNORM F 1020Title : First aid salvage device for fire fighting purposes - Requirements, testing, maintenance -

Additional requirements to ÖNORM EN 1498 and ÖNORM EN 1865-1Scope : The present ÖNORM defines a first aid salvage device set, including a salvage sheet and a

carrying sheet, packed in a carrying bag. Furthermore the requirements for materials, definitions to design and composition, provisions for testing and designation as well as provisions for the holder are treated. In addition to the provisions of ÖNORM EN 1498 and ÖNORM EN 1865-1, this ÖNORM defines further requirements and designs for first aid salvage device sets for the use of fire and rescue services.


Subsector : B01 Registration Date : 2013-05-30Organization : EVSCountry : EstoniaProject ID : 00114114/0001 Project EstablishedICS : 13.220.10, 93.025, 93.160National Ref : EVS 812-6:2011/prA1Title : Fire safety of constructions - Part 6: Water supply - Amendment A1Scope : This Estonian standard provides the technical solution for design and installation town

mains and water network within buildings intended for fire service use. Its specifies performance requirements for fire service water supply capacity, pipe work and rated output discharge. The Amendment supplements requirements for cottages and summer-houses.

Relatedness :National : REV/AMD EVS 812-6:2012

Subsector : B01 Registration Date : 2013-05-27

Organization : UNICountry : ItalyProject ID : 70001730/0001 Project EstablishedICS : 13.220.20National Ref : U70001730Title : Fire fighting equipment - Dry pipe Fire Hydrant systems - Design, installation and

operationScope : This technical specification deals with the design, installation and operation of Dry Pipe

Fire Hydrant Systems to be installed in areas subject to freeze. It shall be used in conjunction with UNI 10779.


Subsector : B01 Registration Date : 2013-05-27Organization : UNICountry : ItalyProject ID : 70001741/0001 Project EstablishedICS : 13.220.10National Ref : U70001741Title : Fire fighting equipment - Fire extinguishers - Part 1: Initial verification and maintenanceScope : This standard specifies the criteria for initial verification, surveillance, regular control,

revision and testing of fire extinguishers in order to guarantee their operational efficiency. This standard does not apply to the activity of extinguishers installation.

Relatedness :National : REV/AMD UNI 9994:2003

Subsector : B01 Registration Date : 2013-05-21Organization : SUTNCountry : SlovakiaProject ID : 92300313/0001 Project EstablishedICS : 13.220.50, 29.060.20National Ref : STN 92 0205/Z1Title : Fire behaviour of construction products and building constructions. Circuit integrity

maintenance of cable systems. Requirements, testing and classification. Amendment 1

Relatedness :National : REV/AMD STN 92 0205

Subsector : B01 Registration Date : 2013-05-21Organization : SUTNCountry : SlovakiaProject ID : 92300413/0001 Project EstablishedICS : 13.220.50, 29.060.20National Ref : STN 92 1101-4Title : Products for electrical distribution, control and communications for the purposes of fire

safety of buildings. Part 4: Enclosures with fire protection for low-voltage switchgear and controlgear assemblies

Scope : The task is to establish requirements for fire-fighting properties of low-voltage switchgear and controlgear assemblies for the purpose of fire safety buildings

Relatedness :

National : REV/AMD STN 92 1101-4

Subsector : B01 Registration Date : 2013-05-27Organization : NBN Draft Issue Date : 2013-04-08Country : Belgium Latest Date for Comments : 2013-09-06Project ID : BE612288/0001 Draft for public enquiryICS : 13.220.10National Ref : NBN S 21-024Title : Fire-fighting hoses - Impermeable lay-flat hoses for connection to fire pumps and fire

engines


Subsector : B01 Registration Date : 2013-05-27Organization : AFNORCountry : FranceProject ID : FA182465/0001 Project EstablishedICS :National Ref : PR NF S61-938/A1Title : Fire safety systems (F.S.S.) . Manual control Device (M.C.D.) - Manual Centralized

Control Device (M.C.C.D.) - Control with indicating Device (C.I.D.) - Command Adapter Device (C.A.D.)

Relatedness :National : REV/AMD NF S61-938:199107 (S61-938)

Subsector : B01 Registration Date : 2013-05-31Organization : AENORCountry : SpainProject ID : P0041431/0001 Project EstablishedICS :National Ref : PNE 23510Title : Fire extinguishing systems in industrial kitchens. General requirements.Scope : This standard establishes general requirements for fire protection of industrial kitchens



Subsector B02: STRUCTURES

Subsector : B02 Registration Date : 2013-05-21Organization : ASICountry : AustriaProject ID : 00025696/0001 Project EstablishedICS : 91.040.01National Ref : ÖNORM B 1301Title : Object safety tests for Non-residential buildings - Regular test routines in the course of

visual inspections and assessmentsScope : The present Austrian Standard represents a collection of technical rules for the anticipatory

holistic consideration of physical security and for the provable implementation of relevant

Scope : inspections concerning mandatory and required caution in non-residential buildings (processed organizational knowledge on building security). The physical security inspection routines listed in this ÖNORM can be applied to non-residential buildings in the field of building construction. Residential buildings according to ÖNORM B 1300 as well as buildings in the field of civil engineering are not covered by this ÖNORM. Furthermore, this Austrian Standard does not apply to production plants operating within buildings which are subject to official approval procedures concerning factory management. Possible official procedure steps are not dealt with by this ÖNORM.


Subsector : B02 Registration Date : 2013-05-21Organization : ASICountry : AustriaProject ID : 00025701/0001 Project EstablishedICS : 91.010.30National Ref : ÖNORM B 1800 Beiblatt 1Title : Determination of areas and volumes of buildings - Supplement 1: Application examplesScope : This supplement contains examples of the application of ÖNORM B 1800 for the

determination of areas for specific individual cases.


Subsector : B02 Registration Date : 2013-05-31Organization : UNMZ Draft Issue Date : 2013-05-30Country : Czech Republic Latest Date for Comments : 2013-09-30Project ID : 73004313/0001 Project EstablishedICS :National Ref :Title : Chimneys and connecting flue pipes - Design, construction and instalation of heatings

appliancesScope : The aim of the amendmant Z2 is adressing the oulet flue gas fired appliances type "C" and

correct the errors of text in standard.

Relatedness :National : REV/AMD Amendment Z2 of ČSN 73 4201 (2010)

Subsector : B02 Registration Date : 2013-05-10Organization : TSECountry : TurkeyProject ID : tst92006/0001 Project EstablishedICS : 91.100.30National Ref :Title : Recommendations for the measurement of dynamic modulus of elasticityScope : This standard gives recommendations for the determination of dynamic modulus of

elasticity of plain concrete in the laboratory using resonance of vibration in the longitudinal mode.

Relatedness :National : NewEuropean : Modified BS 1881-209:1990

Subsector : B02 Registration Date : 2013-05-10Organization : TSECountry : TurkeyProject ID : tst92006/0001 Project EstablishedICS : 91.100.30National Ref :Title : Recommendations for the measurement of dynamic modulus of elasticityScope : This standard gives recommendations for the determination of dynamic modulus of

elasticity of plain concrete in the laboratory using resonance of vibration in the longitudinal mode.

Relatedness :National : NewInternational : Modified ASTM C 215:2008


Subsector B04: CEMENT

Subsector : B04 Registration Date : 2013-05-27Organization : AFNORCountry : FranceProject ID : FA182590/0001 Project EstablishedICS :National Ref : PR NF P15-319Title : Hydraulics binders - Sulphate resisting cement

Relatedness :National : REV/AMD NF P15-319:200609 (P15-319)


Subsector B08: DOORS AND WINDOWS

Subsector : B08 Registration Date : 2013-05-21Organization : ASICountry : AustriaProject ID : 00025698/0001 Project EstablishedICS : 91.190National Ref : ÖNORM B 5356Title : Cylinders for locks - Additional requirements and proportionsScope : This Austrian Standard is applicable only jointly with ÖNORM EN 1303. It specifies

additional requirements, concepts and dimensions as well as marking of conformity for cylinders for locks in form of profile cylinders. The main feature of this ÖNORM is to ensure the exchangeability of profile cylinders within adequate locks and hardware.


Subsector : B08 Registration Date : 2013-05-21Organization : ASICountry : AustriaProject ID : 00025700/0001 Project EstablishedICS : 13.220.01, 91.060.50, 91.090National Ref : ÖNORM B 3852

Title : Fire resisting doorsets - Vertical lifting, sectional overhead, tilting, rolling, sliding and folding doors - Requirements, testing and marking

Scope : The present Austrian Standard contains regulations for requirements, testing and marking of fire resisting doorsets out of quality controlled production of vertical lifting, sectional overhead, tilting, rolling, sliding and folding doors, according to fire resistance E 30, E 60 and E90, EI2 30, EI2 60 and EI2 90. Excluded of this Austrian Standard are miscellaneous fire resisting doorsets according to ÖNORM B 3850 and attic closures according to ÖNORM B 3860.


Subsector : B08 Registration Date : 2013-05-21Organization : ASICountry : AustriaProject ID : 00025704/0001 Project EstablishedICS : 13.220.01, 91.190National Ref : ÖNORM B 3859Title : Building hardware - Leverhandles for fire resisting doors - Dimensions and requirementsScope : This Austrian Standard includes specifications for design, testing and marking of door lever

handles, escutcheons and roses from quality controlled production for fire resisting closures and shutters according to ÖNORM B 3850, ÖNORM B 3851 and ÖNORM B 3852, in combination with door locks conforming to ÖNORM B 3858 and/or DIN 18250. Door fittings as specified in this Austrian Standard fulfil, even in case of fire, the conditions ensuring the function of fire doors.


Subsector : B08 Registration Date : 2013-05-08Organization : IPQ Draft Issue Date : 2013-04-16Country : Portugal Latest Date for Comments : 2013-05-16Project ID : C0981301/0001 Draft for public enquiryICS : 91.060.50National Ref : prNP 4517Title : Selection of windows, external doors and lightweight facades in function of their

exposureScope : This standard aims at the selection of minimal performance classes for external windows,

doors and light facades with glass to be installed in Portugal. This standard is intended to support the use of product standards NP EN 14351-1: 2008 EN 13830:2009 + 1 and NP EN 13830: 2009 in Portugal. This standard gives information to make the requirements profile as recommended in Annex D of the standard NP EN 14351-1:2008 + A1. This standard applies to external windows, doors and light facades with glass, whatever material is used


Subsector : B08 Registration Date : 2013-05-13Organization : TSECountry : TurkeyProject ID : tst12655/0002 Project EstablishedICS : 13.310, 91.060.50

National Ref :Title : Steel doors with burglar resistanceScope : This standard covers steel doors which prohibit unouthorited entrance to buildings



Subsector B09: THERMAL MATTERS

Subsector : B09 Registration Date : 2013-05-21Organization : ASICountry : AustriaProject ID : 00025705/0001 Project EstablishedICS : 91.120.10National Ref : ÖNORM B 8110-6Title : Thermal insulation in building construction - Part 6: Principles and verification methods -

Heating demand and cooling demandScope : This Austrian Standard specifies the principles for calculation of the heating demand and

the cooling demand. On the basis of the utilization profiles according to ÖNORM B 8110-5, it enables proof of evidence concerning the requirements according to ÖNORM B 8110-1.


Subsector : B09 Registration Date : 2013-05-21Organization : ASICountry : AustriaProject ID : 00025706/0001 Project EstablishedICS : 91.120.10National Ref : ÖNORM B 8110-8Title : Thermal insulation in building construction - Part 8: Tabulated design values for thermal

insulation of componentsScope : The present Austrian Standard provides technical design values for thermal insulation of

wall and ceiling components as well as of windows, doors and air layers, applicable to all kinds of calculations concerning structural physics, if no product-related characteristic values for thermal insulation according to the relevant Austrian Standards dealing with determination of characteristic values (e.g. ÖNORM B 6015-2 and/or ÖNORM B 6015-5) are available.


Subsector : B09 Registration Date : 2013-05-15Organization : DS Draft Issue Date : 2012-02-07Country : Denmark Latest Date for Comments : 2013-07-15Project ID : 0M261912/0001 Project EstablishedICS : 91.120.10National Ref : DSF/DS 452:2013Title : Code of Practice for thermal insulation of technical service and supply systems in

buildingsScope : See Danish scope.


Subsector : B09 Registration Date : 2013-05-08Organization : NENCountry : NetherlandsProject ID : 50001832/0001 Project EstablishedICS : 13.080.01National Ref : NEN 5725:2013 Concept nlTitle : Soil quality - Strategy for preliminary investigation prior to exploratory and main surveyScope : This standard describes priliminary investigation prior to field research. The purpose is to

collect relevant information about the location from the owner, government etc, and for interviews, field inspection and archive research.



Subsector B13: SOLAR ENERGY

Subsector : B13 Registration Date : 2013-05-21Organization : ASICountry : AustriaProject ID : 00025694/0001 Project EstablishedICS : 27.160National Ref : ÖNORM M 7777 Beiblatt 1Title : Solar thermal systems - Supplement 1: Examples of hydraulic circuits and worksheets

for data collection, commissioning and acceptanceScope : The present Supplement shall be applied to the planning, installation and operation of

thermal systems with solar collectors using heat transfer fluids. It refers to small and medium-sized solar thermal systems for water heating, heating support and general thermal use up to a gross collector surface of 50 m2, except drain-back and thermosiphon installations. The present Supplement contains standardized examples of hydraulic circuits and worksheets for data collection, commissioning and acceptance of solar thermal systems.



Subsector B14: GEOTECHNICS

Subsector : B14 Registration Date : 2013-05-16Organization : ISRM

Country :Former Yugoslav Republic of Macedonia

Project ID : 00042146/0003Published Standard

ICS : 93.020National Ref : МКС 1004:2013Title : Geotechnical investigation and testing – Field testing – Determination of bulk density -

Sand-Cone method

Scope : This Macedonian standard describes the procedure for determination of soil bulk density with Sand-Cone method in field conditions.Estimation of soil compaction and verification of density during execution of earthworks and construction of civil engineering structures


Subsector : B14 Registration Date : 2013-05-13Organization : TSECountry : TurkeyProject ID : tst06168/0001 Project EstablishedICS : 93.020National Ref :Title : Soil testing for civil engineering purposes - Chemical tests - Pore water extraction and

determination of the soluble salt content of soils by refractometerScope : This test method covers a rapid procedure for squeezing pore water from fine-grained soils

for the purpose of determining the amount of soluble salts present in the extracted pore water

Relatedness :National : NewInternational : Modified ASTM D 4542:2007

Subsector : B14 Registration Date : 2013-05-13Organization : TSECountry : TurkeyProject ID : tst06169/0001 Project EstablishedICS : 93.020National Ref :Title : Soil testing for civil engineering purposes - Chemical tests - Determination of the organic

matter contentScope : This procedure covers the determination of the percentage by dry mass of organic matter

present in a soil.



Subsector B17: LIGHTING EQUIPMENT AND LIGHTING APPLICATION TECHNOLOGY

Subsector : B17 Registration Date : 2013-05-27Organization : AFNORCountry : FranceProject ID : FA182400/0001 Project EstablishedICS :National Ref : PR XP X90-013Title : External light pollution - Control and calculation methods



Subsector B20: DRAINAGE EQUIPMENT

Subsector : B20 Registration Date : 2013-05-31Organization : UNMZ Draft Issue Date : 2013-08-30Country : Czech Republic Latest Date for Comments : 2014-02-28Project ID : 75003813/0001 Project EstablishedICS :National Ref :Title : Wastewater discharge and treatment from health facilitiesScope : The aim of revision is up-dating standard and bringing it into line with the ENs and ČSNs in

the field of water management and fire safety of buildings, updating normative references.

Relatedness :National : REV/AMD ČSN 75 6406 (1996)


Subsector B23: DISTRICT HEATING

Subsector : B23 Registration Date : 2013-05-10Organization : UNMZ Draft Issue Date : 2013-05-15Country : Czech Republic Latest Date for Comments : 2013-06-15Project ID : 38000413/0001 Project EstablishedICS :National Ref :Title : Water heating networks, except directly buried networksScope : The aim of the new standard is unification of related Czech Standards using of new

information for water heating networks, except directly buried networks

Relatedness :National : REV/AMD CSN 38 3378


Subsector B25: GAS DISTRIBUTION INSTALLATION AND RELATED EQUIPMENT

Subsector : B25 Registration Date : 2013-05-16Organization : ISRM

Country :Former Yugoslav Republic of Macedonia

Project ID : 00042968/0003Published Standard

ICS : 91.140.40National Ref : МКС 1007:2013Title : Gas pipelines and fittings indication labelsScope : This standard specifies requirements for indication labels for gas pipelines and fittings.


Subsector : B25 Registration Date : 2013-05-31Organization : AENORCountry : SpainProject ID : P0041362/0001 Project EstablishedICS :National Ref : PNE 60601

Title : Machines rooms and gas fired self contained apparatus for heating or cooling generation or cogeneration.

Scope : This standard establishes the requirements applicable to rooms or enclosures that house, well generators for the production of heat or cold by heat transfer fluid, excluding air and including water vapour with a maximum working pressure not exceeding 0,5 bar , whose combined rated output exceeding 70 kW, or cogeneration equipment with nominal heat input exceeding 70 kW, using gaseous fuels of the families defined in the standard UNE-EN 437. This standard also applies to stand-alone equipment, generating either heat or cold, or for cogeneration, outdoor installed.

Relatedness :National : REV/AMD UNE 60601:2006


Subsector B26: ROAD BUILDING AND MAINTENANCE

Subsector : B26 Registration Date : 2013-05-31Organization : BSICountry : United KingdomProject ID : 01301400/0001 Project EstablishedICS :National Ref : BS 7533-1Title : Pavements constructed with clay, natural stone or concrete pavers. Part 1

Design


Subsector : B26 Registration Date : 2013-05-31Organization : BSICountry : United KingdomProject ID : 01301401/0001 Project EstablishedICS :National Ref : BS 7533-2Title : Pavements constructed with clay, natural stone or concrete pavers. Part 2

Guidance on Installation


Subsector : B26 Registration Date : 2013-05-31Organization : UNMZ Draft Issue Date : 2013-07-30Country : Czech Republic Latest Date for Comments : 2013-09-30Project ID : 73006913/0001 Project EstablishedICS :National Ref :Title : Road Building - Hydraulically Bound Mixture Courses - Part 1: Construction and

evaluation of conformityScope : The aim of revision is up-dating of requirements contained in ČSN 73 6123-1:2008

according to EN 14227-1 to EN 14227-5.

Relatedness :

National : REV/AMD ČSN 73 6124-1 (2008)

Subsector : B26 Registration Date : 2013-05-31Organization : UNMZ Draft Issue Date : 2013-06-30Country : Czech Republic Latest Date for Comments : 2013-07-30Project ID : 73007013/0001 Project EstablishedICS :National Ref :Title : Road building - Concrete pavements - Part 1: Construction and conformity assessmentScope : The aim of revision is up-dating of requirements contained in ČSN 73 6123-1:2006

according to EN 13877-1 and EN 13877-2.

Relatedness :National : REV/AMD ČSN 73 6123-1 (2006)

Subsector : B26 Registration Date : 2013-05-14Organization : SNV Draft Issue Date : 2013-05-13Country : Switzerland Latest Date for Comments : 2013-06-24Project ID : CH130010/0001 Draft for public enquiryICS : 93.080.01National Ref : SN 641810Title : Utility analyzes and cost-effectiveness analyzes for road infrastructure projects


Subsector : B26 Registration Date : 2013-05-14Organization : SNV Draft Issue Date : 2013-05-14Country : Switzerland Latest Date for Comments : 2013-07-14Project ID : CH130011/0001 Draft for public enquiryICS : 93.080.01National Ref : SN 640075Title : Pedestrian traffic

Obstacle-free traffic area



Subsector B27: WATERPROOFING MATERIALS

Subsector : B27 Registration Date : 2013-05-27Organization : AFNORCountry : FranceProject ID : FA182886/0001 Project EstablishedICS :National Ref : PR FD DTU 43.11 P3Title : Building work - Impermeability of flat roofs with a masonry structural member in a

mountain climate - Part 3 : Guide intended for the contracting authority



Subsector B29: AGGREGATES

Subsector : B29 Registration Date : 2013-05-27Organization : NBNCountry : BelgiumProject ID : BE058307/0001 Project EstablishedICS : 91.100.15National Ref : NBN B 11-256Title : Aggregates and grounds - Determination of conventional organic matter content -

Method with hydrogen peroxide



Subsector B31: HEATING SYSTEMS IN BUILDINGS

Subsector : B31 Registration Date : 2013-05-27Organization : UNICountry : ItalyProject ID : 0208E380/0001 Project EstablishedICS : 17.200.10National Ref : E0208E380Title : Heat costs allocation based on indirect accounting by insertion time counter and shut-off

valves, with insertion time compensated by average temperature of the fluidScope : The Standard defines the indirect accounting method and the prescriptions for plants,

installation, use and testing of heat cost allocation systems based on insertion time counter and heat shut-off valves. The insertion time is compensated by the average temperature of the fluid. This systems are used to capture and account the proportionate thermal output of a consumer units for heat cost allocation.

Relatedness :National : REV/AMD UNI/TR 11388:2010


Subsector B99: UNDETERMINED

Subsector : B99 Registration Date : 2013-05-14Organization : SIS Draft Issue Date : 2013-05-05Country : Sweden Latest Date for Comments : 2013-07-05Project ID : 00003070/0001 Project EstablishedICS : 91.190National Ref : 3070Title : Door and window fittings – Electrically operated locking plates for fixed mounted locks –

Burglar resistance – Requirements and test methods


Subsector : B99 Registration Date : 2013-05-14

Organization : SIS Draft Issue Date : 2013-05-05Country : Sweden Latest Date for Comments : 2013-07-05Project ID : 00003072/0001 Project EstablishedICS : 91.190National Ref : 3072Title : Door and window fittings – Mechanical cylinder– Burglar resistance – Requirements and

test methods



** End of Sector **




Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS


Subsector C01: Food products

Subsector : C01 Registration Date : 2013-05-08Organization : NENCountry : NetherlandsProject ID : 50001814/0001 Project EstablishedICS : 67.100.01National Ref : NEN 6809:2013 Concept nlTitle : Milk and milk products - Enumeration of thermophilic aerobic sporeforming bacteriaScope : This standard describes a method for the determination of the content of thermophilic

aerobic sporeforming bacteria.


Subsector : C01 Registration Date : 2013-05-08Organization : NENCountry : NetherlandsProject ID : 50001816/0001 Project EstablishedICS : 67.100.01National Ref : NEN 6813:2013 Concept nlTitle : Milk and milk products - Enumeration of spores of mesophilic aerobic sporeforming

bacteriaScope : NEN 6813 describes a method for the determination of spores of mesophilic aerobic

sporeforming bacteria.


Subsector : C01 Registration Date : 2013-05-27Organization : AFNORCountry : FranceProject ID : FA182530/0001 Project EstablishedICS :National Ref : PR NF U47-311Title : Animal health analysis methods - PCR reagent control used in animal health


Subsector : C01 Registration Date : 2013-05-27Organization : AFNORCountry : FranceProject ID : FA182883/0001 Project EstablishedICS :National Ref : PR NF U47-600-2Title : Animal health analysis methods - PCR - Part 2 : requirements and recommandations for

the development and the validation of veterinary PCR


Subsector : C01 Registration Date : 2013-05-27Organization : AFNORCountry : FranceProject ID : FA182884/0001 Project EstablishedICS :National Ref : PR NF U47-600-1Title : Animal health analysis methods - PCR - Part 1 : requirements and recommandations for

the implementation of veterinary PCR


Subsector : C01 Registration Date : 2013-05-17Organization : TSECountry : TurkeyProject ID : t1002698/0001 Project EstablishedICS : 67.080.20National Ref :Title : Canned Green Beans With Meat-Ready To ServeScope : This standard applies to canned green beans with meat which is ready to serve.


Subsector : C01 Registration Date : 2013-05-17Organization : TSECountry : TurkeyProject ID : t1004890/0001 Project EstablishedICS : 67.080.01National Ref :Title : Fruit and Vegetable Products- Determination of Soluble Solids Content- Refractometric

MethodScope : The method is particularly applicable to thick products, to products containing suspendes

matter and to products rich in sugars. If the products contain other dissolved substabces, the results will be only approximate, nevertheless they may be considered conventionall as the soluble solids content. The principle as the soluble soldis


Subsector : C01 Registration Date : 2013-05-29Organization : TSECountry : TurkeyProject ID : t2001070/0001 Project EstablishedICS : 67.120.10National Ref :Title : Turkish sucukScope : This standard specifies Turkish sucuk, it doesn't specify heat-treated sucuk.


Subsector : C01 Registration Date : 2013-05-13Organization : TSECountry : TurkeyProject ID : t2004500/0001 Project EstablishedICS : 67.060National Ref :Title : Wheat FlourScope : This standard specifies by indivicually wheat floor which is prepared or mixing of triticum

aestivum, triticum compactum and tritium drum wheat.


Subsector : C01 Registration Date : 2013-05-17Organization : TSECountry : TurkeyProject ID : tst03522/0001 Project EstablishedICS : 67.220.20National Ref :Title : Bakers Yeast Scope : This standard applies to bakers yeast and produced at industry which is defined in 0.2.1. It

does not apply to beer yeast and wild yeast.


Subsector : C01 Registration Date : 2013-05-10Organization : TSECountry : TurkeyProject ID : tst12327/0001 Project EstablishedICS : 67.120.20National Ref :Title : Processed poultry carcass-WingsScope : This standard includes the processed poultry carcass wings


Subsector : C01 Registration Date : 2013-05-10Organization : TSECountry : TurkeyProject ID : tst13061/0001 Project EstablishedICS : 67.120.20National Ref :Title : Processed Turkey Carcass – BreastScope : This standart contains the identification, grading, characteristics sampling and presentation

of processed turkey breast meat.


Subsector : C01 Registration Date : 2013-05-13Organization : TSECountry : TurkeyProject ID : tst92142/0001 Project EstablishedICS : 67.080.20National Ref :Title : Frozen garnishScope : This standard specifies frozen garnish



Subsector C03: CHEMISTRY

Subsector : C03 Registration Date : 2013-05-13Organization : TSECountry : TurkeyProject ID : t4007808/0001 Project EstablishedICS : 65.020.30National Ref :Title : Livestock Marking Tags

Scope : This standard covers livestock Marking Tags



** End of Sector **




Sector F : FUNDAMENTAL STANDARDS


Subsector F12: INFORMATION PROCESSING SYSTEMS

Subsector : F12 Registration Date : 2013-05-21Organization : ASICountry : AustriaProject ID : 00025699/0001 Project EstablishedICS : 35.040National Ref : ÖNORM ISO/IEC 27005Title : Information technology - Security techniques - Information security risk management

(ISO/IEC 27005:2011)Scope : This ÖNORM provides an accurate guide to IT risk analysis and risk management in the IT

field for the Information Security Management ISMS. On the one hand includes a complete description of the risk management process as a whole and on the other hand, a detailed description of each step of the risk management and risk analysis. The annexes provide useful information for development of risk management in information security and the fulfillment of requirements of the ISMS standard ISO / IEC 27001.


Subsector : F12 Registration Date : 2013-05-31Organization : UNMZ Draft Issue Date : 2013-06-30Country : Czech Republic Latest Date for Comments : 2013-09-30Project ID : 01004113/0001 Project EstablishedICS :National Ref : 01 8245Title : Information system in public transport – National centre for real time informationScope : CISReal – National central system of real time information in public transport is a global

entity defined by this standard. Generally there is no centre in the Czech Republic which function is to control multimodal or monomodal transport (except air transport) and to organize public transport. There has been no standard to define this issue on national level. Nor technical specification CEN TS 15531 SIRI does not offer the possibility to build up a national information centre so this standard is unique European interoperable solution taking into account national specifics and the state of the art of information systems in public transport. This standard defines minimum requirements on the compatibility of real time information systems in public transport in the Czech Republic. This standard has been created especially for the following reasons: 1. It defines minimum requirements on operation of National central system of real time information in public transport (CISReal); 2. It contains the recommendations for equipment and functionality of real time information system (ISR); 3. It unifies the requirements on ISR of diferent carriers and at the same time provides guidance for procedure when designing system and its technical requirements which is important mainly for appliances for financial subventions to build-up such systems and technical requirements definition for public tenders; 4. It improves the possibilities to gain non-fragmented and national scale data in real time of PT vehicles providing a transport services among various regions; 5. It enables basic cooperation on European solution defined by CEN TS 15531 (SIRI) specifying interfaces and communication among the servers; 6. It is the basis for designing a distribution system for mutual communication of servers of local and integrated transport providers; 7. It is to profit from the existing National system of timetables (CIS JŘ) which contains the

Scope : necessary set of static data (planned data).



Subsector F20: QUALITY ASSURANCE

Subsector : F20 Registration Date : 2013-05-27Organization : AFNORCountry : FranceProject ID : FA182506/0001 Project EstablishedICS :National Ref : PR NF X50-056Title : Services for resident persons


Subsector : F20 Registration Date : 2013-05-27Organization : AENORCountry : Spain Latest Date for Comments : 2013-06-23Project ID : P0040828/0002 Draft for public enquiryICS :National Ref : PNE 192001-10Title : Inspection procedure for establishments affected by major-accident hazards involving

dangerous substances. Part 10: Evaluation of the location of the emergency planScope : This standard develops the methodology to apply in order to assess the veracity and the

implementation of the Self- Protection Plan, defined as internal Emergency Plan in the Regulation of Serious Accidents involving Dangerous Substances.


Subsector : F20 Registration Date : 2013-05-31Organization : TSECountry : TurkeyProject ID : tst12394/0001 Project EstablishedICS : 95.020National Ref :Title : Demountable load carrying platforms Scope : This standard contains the relevant technical specifications for the determination of

technical features of demontable load carrying platforms.



Subsector F99: UNDETERMINED

Subsector : F99 Registration Date : 2013-05-27Organization : AFNOR

Country : FranceProject ID : FA182398/0001 Project EstablishedICS :National Ref : PR XP X50-144-5Title : Demonstration of the resistance to environmental factors ¿ Designing and performing

environmental tests - Part 5 : Guarantee corfficient


Subsector : F99 Registration Date : 2013-05-27Organization : AFNORCountry : FranceProject ID : FA182399/0001 Project EstablishedICS :National Ref : PR XP X50-144-6Title : Demonstration of the resistance to environmental factors - Designing and performing

environmental tests - Part 6 : Test factor



** End of Sector **




Sector I : MECHANICAL ENGINEERING


Subsector I09: SMALL TOOLS

Subsector : I09 Registration Date : 2013-05-22Organization : TSECountry : TurkeyProject ID : tst05878/0001 Project EstablishedICS : 25.100.70National Ref :Title : Abrasive Papers and ClothsScope : This standard covers abrasive papers and cloths.

Relatedness :National : NewEuropean : Modified BS 3431:1973






Relatedness :National : NewInternational : Modified ISO 21948:2001

Subsector : I09 Registration Date : 2013-05-22Organization : TSE

Country : TurkeyProject ID : tst05878/0001 Project EstablishedICS : 25.100.70National Ref :Title : Abrasive Papers and ClothsScope : This standard covers abrasive papers and cloths.



Subsector I11: MACHINE TOOLS

Subsector : I11 Registration Date : 2013-05-21Organization : ASICountry : AustriaProject ID : 00025703/0001 Project EstablishedICS : 25.100.01, 25.100.70National Ref : ÖNORM ISO 6104Title : Superabrasive products - Rotating grinding tools with diamond or cubic boron nitride -

General survey, designation and multilingual nomenclature Scope : This International Standard gives a general survey, and specifies the designation, of rotating

grinding tools with diamond or cubic boron nitride superabrasive section. It also gives a multilingual nomenclature concerning these tools.



Subsector I12: PULLEYS & BELTS

Subsector : I12 Registration Date : 2013-05-31Organization : BSICountry : United KingdomProject ID : 01301473/0001 Project EstablishedICS :National Ref : BS 6593:1985+A1:2009 CorrigendumTitle : On-site non-mechanical jointing of plied textile and steel reinforced conveyor

belting. Corrigendum



Subsector I15: EQUIPMENT FOR PETROLEUM INDUSTRY

Subsector : I15 Registration Date : 2013-05-31Organization : BSI Draft Issue Date : 2013-05-28Country : United Kingdom Latest Date for Comments : 2013-07-31Project ID : 01102832/0001 Draft for public enquiryICS :National Ref : PD 8010-5Title : PD 8010-5. Pipeline systems. Part 5. Subsea pipelines. Guide to operational

Title : practice



Subsector I28: FLUID POWER

Subsector : I28 Registration Date : 2013-05-31Organization : BSICountry : United KingdomProject ID : 01301559/0001 Project EstablishedICS :National Ref : BS 4368-1:1998Title : Metallic tube connectors for fluid power and general use. Part 1 Split collet

compression fitting. Amendment



Subsector I32: FLANGES

Subsector : I32 Registration Date : 2013-05-28Organization : TSECountry : TurkeyProject ID : tst12884/0002 Project EstablishedICS : 23.060.40National Ref :Title : Earthquake actuated automatic gas shut-off devicesScope : This standard covers the earthquake actuated automatic gas shut-off devices

Relatedness :National : NewInternational : Not Equivalent to ANSI Z 21.21:1995


Relatedness :National : NewInternational : Not Equivalent to ANSI Z 21:1970

Subsector : I32 Registration Date : 2013-05-28Organization : TSECountry : TurkeyProject ID : tst12884/0002 Project EstablishedICS : 23.060.40

National Ref :Title : Earthquake actuated automatic gas shut-off devicesScope : This standard covers the earthquake actuated automatic gas shut-off devices

Relatedness :National : NewInternational : Not Equivalent to ANSI/IEEE 334:1987


Relatedness :National : NewInternational : Not Equivalent to ASCE 25:1997


Subsector I40: INDUSTRIAL PIPING NETWORKS

Subsector : I40 Registration Date : 2013-05-31Organization : BSICountry : United KingdomProject ID : 01301348/0001 Project EstablishedICS :National Ref : BS 1710Title : Specification for identification of pipelines and services



Subsector I99: UNDETERMINED

Subsector : I99 Registration Date : 2013-05-28Organization : SFS Draft Issue Date : 2013-05-21Country : Finland Latest Date for Comments : 2013-07-22Project ID : 0000E293/0001 Draft for public enquiryICS :National Ref :Title : Accident recording system for lifts, lifting platforms, escalators and moving walks


Subsector : I99 Registration Date : 2013-05-10Organization : DINCountry : GermanyProject ID : 01200431/0001 Project EstablishedICS :National Ref : 01200431Title : Dispense systems for draught beverages - Part 5: Testing



** End of Sector **




Sector M : METALLIC MATERIALS


Subsector M01: STEEL

Subsector : M01 Registration Date : 2013-05-27Organization : AFNORCountry : FranceProject ID : FA182809/0001 Project EstablishedICS :National Ref : PR NF A35-080-1Title : Reinforcing steel - Weldable steel - Part 1 : bars and coils

Relatedness :National : REV/AMD NF A35-080-1:201010 (A35-080-1)

Subsector : M01 Registration Date : 2013-05-27Organization : AFNORCountry : FranceProject ID : FA182810/0001 Project EstablishedICS :National Ref : PR NF A35-080-2Title : Reinforcing steel - Weldable steel - Part 2 : welded fabric

Relatedness :National : REV/AMD NF A35-080-2:201010 (A35-080-2)

Subsector : M01 Registration Date : 2013-05-27Organization : AFNORCountry : FranceProject ID : FA182823/0001 Project EstablishedICS :National Ref : PR XPA04-800Title : Steel products - Non-melting assessment method of light scrap by the means of

shredding, magnetic sorting and washing - Determination of the content of the clean and dry magnetic product



Subsector M05: WELDING

Subsector : M05 Registration Date : 2013-05-27Organization : AFNORCountry : FranceProject ID : FA182396/0001 Project EstablishedICS :National Ref : PR NF A 81-362Title : Welding, soldering, brazing, braze-welding - Filler metals for soldering, brazing and

braze-welding - Classification, coding, acceptance testing

Relatedness :National : REV/AMD NF A81-362:201012 (A81-362)


** End of Sector **




Sector N : NON-METALLIC MATERIALS


Subsector N01: PAPER AND BOARD

Subsector : N01 Registration Date : 2013-05-08Organization : NENCountry : NetherlandsProject ID : 50001818/0001 Project EstablishedICS : 85.060National Ref : NEN 1761:2013 Concept nlTitle : Paper and board - Determination of machine direction and cross directionScope : NEN 1761 describes four methods for the determination of the machine direction and cross

direction of paper and board. The first two methods are fast orientating research.


Subsector : N01 Registration Date : 2013-05-08Organization : NENCountry : NetherlandsProject ID : 50001819/0001 Project EstablishedICS : 85.060National Ref : NEN 1764:2013 Concept nlTitle : Paper - Determination of wire sideScope : NEN 1764 describes three methods for the determination of wire side of paper. The

standard is applicable to all sorts of simple not coated paper.


Subsector : N01 Registration Date : 2013-05-08Organization : NENCountry : NetherlandsProject ID : 50001820/0001 Project EstablishedICS : 85.060National Ref : NEN 1827:2013 Concept nlTitle : Paper and board - Determination of the changes of dimensions after immersion in water

(Fenchel method)Scope : This standard describes a method for the determination of the changes of dimensions by

total immersion in water and is applicable to most sorts of paper and board with a mass per surface up to 250 gram/m2. The method is not suitable to crepe paper and corrugated cardboard. The changes of dimensions of paper and board by changes of the relative humidity is measured according to NEN 1856.


Subsector : N01 Registration Date : 2013-05-08Organization : NENCountry : NetherlandsProject ID : 50001821/0001 Project EstablishedICS : 85.060National Ref : NEN 1839:2013 Concept nlTitle : Paper - Determination of paper surface roughness with waterScope : NEN 1839 describes the determination of the surface roughness of paper under pressure

Scope : during the printing process.


Subsector : N01 Registration Date : 2013-05-08Organization : NENCountry : NetherlandsProject ID : 50001822/0001 Project EstablishedICS : 85.060National Ref : NEN 1857:2013 Concept nlTitle : Paper and board - Determination of surface abrasion - Taber methodScope : NEN 1857 describes a method for the determination of surface abrasion of paper or board

in wet or dry condition. The standard is applicable to all sorts of paper and board but not when the surface is treated with wax or similar products.


Subsector : N01 Registration Date : 2013-05-08Organization : NENCountry : NetherlandsProject ID : 50001823/0001 Project EstablishedICS : 85.060National Ref : NEN 1858:2013 Concept nlTitle : Paper and board - Determination of plybond strengthScope : NEN 1858 describes a method for the determination of plybond strength of board and

paper.


Subsector : N01 Registration Date : 2013-05-08Organization : NENCountry : NetherlandsProject ID : 50001824/0001 Project EstablishedICS : 85.060National Ref : NEN 2014:2013 nlTitle : Paper and board - Determination of air permeability, Bekk methodScope : NEN 2014 describes the determination of the permeability of paper and board. The Bekk

method is applicable to densed paper.



Subsector N03: PETROLEUM PRODUCTS

Subsector : N03 Registration Date : 2013-05-22Organization : ISSCountry : Serbia Latest Date for Comments : 2013-06-25

Project ID : 00043369/0001 Draft for public enquiryICS : 75.160.20National Ref : SRPS B.H2.125:2013Title : Standard Specification for Aviation GasolineScope : This specification covers formulating specifications for purchases of aviation gasoline under

contract and is intended primarily for use by purchasing agencies. This specification defines specific types of aviation gasolines for civil use. It does not include all gasolines satisfactory for reciprocating aviation engines. Certain equipment or conditions of use may permit a wider, or require a narrower, range of characteristics than is shown by this specification.


Subsector : N03 Registration Date : 2013-05-22Organization : ISSCountry : Serbia Latest Date for Comments : 2013-06-25Project ID : 00043370/0001 Draft for public enquiryICS : 75.160.20National Ref : SRPS B.H2.126:2013Title : Standard Specification for Aviation Turbine FuelsScope : This specification covers purchases of aviation turbine fuel under contract and is intended

primarily for use by purchasing agencies. This specification does not include all fuels satisfactory for aviation turbine engines, but rather, defines the following specific types of aviation fuel for civil use: Jet A; and Jet A-1. The fuels shall be sampled and tested appropriately to examine their conformance to detailed requirements as to composition, volatility, fluidity, combustion, corrosion, thermal stability, contaminants, and additives.


Subsector : N03 Registration Date : 2013-05-22Organization : ISSCountry : Serbia Latest Date for Comments : 2013-06-25Project ID : 00043372/0001 Draft for public enquiryICS : 75.160.20National Ref : SRPS B.H0.502:2013Title : Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace

ContaminationScope : This practice covers the types of and preparation of containers found most suitable for the

handling of aviation fuel samples for the determination of critical properties affected by trace contamination.


Subsector : N03 Registration Date : 2013-05-22Organization : ISSCountry : Serbia Latest Date for Comments : 2013-06-25Project ID : 00043373/0001 Draft for public enquiryICS :National Ref : SRPS B.H0.501:2013Title : Standard Guide for Microbial Contamination in Fuels and Fuel Systems

Scope : This guide provides personnel who have a limited microbiological background with an understanding of the symptoms, occurrence, and consequences of chronic microbial contamination. The guide also suggests means for detection and control of microbial contamination in fuels and fuel systems. This guide applies primarily to gasoline, aviation, boiler, industrial gas turbine, diesel, marine, furnace fuels and blend stocks (see Specifications D396, D910, D975, D1655, D2069, D2880, D3699, D4814, D6227, and D6751), and fuel systems. However, the principles discussed herein also apply generally to crude oil and all liquid petroleum fuels. ASTM Manual 47 provides a more detailed treatment of the concepts introduced in this guide; it also provides a compilation of all of the standards referenced herein.


Subsector : N03 Registration Date : 2013-05-22Organization : ISSCountry : Serbia Latest Date for Comments : 2013-06-25Project ID : 00043829/0001 Draft for public enquiryICS :National Ref : SRPS B.H8.177:2013Title : Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus

Method Scope : This test method covers the automatic determination of color of a wide variety of

petroleum products such as undyed motor and aviation gasoline, aviation turbine fuels, naphthas, kerosine, pharmaceutical white oils, diesel fuel oils, heating oils, and lubricating oils by the automatic tristimulus method.


Subsector : N03 Registration Date : 2013-05-22Organization : ISSCountry : Serbia Latest Date for Comments : 2013-06-25Project ID : 00043830/0001 Draft for public enquiryICS : 75.160.20National Ref : SRPS B.H8.159:2013Title : Standard Test Method for Thermal Oxidation Stability of Aviation Turbine FuelsScope : This standard gives test method covers the procedure for rating the tendencies of gas

turbine fuels to deposit decomposition products within the fuel system. The differential pressure values in mm Hg are defined only in terms of this test method.


Subsector : N03 Registration Date : 2013-05-22Organization : ISSCountry : Serbia Latest Date for Comments : 2013-06-25Project ID : 00043831/0001 Draft for public enquiryICS : 75.160.20National Ref : SRPS B.H8.149:2013Title : Standard Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel Scope : This test method covers two procedures for determination of the smoke point of kerosine

Scope : and aviation turbine fuel, a manual procedure and an automated procedure, which give results with different precision. The smoke point is related to the hydrocarbon type composition of such fuels. Generally the more aromatic the fuel the smokier the flame. A high smoke point indicates a fuel of low smoke producing tendency.


Subsector : N03 Registration Date : 2013-05-22Organization : ISSCountry : Serbia Latest Date for Comments : 2013-06-25Project ID : 00043832/0001 Draft for public enquiryICS :National Ref : SRPS B.H8.128:2013Title : Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure Scope : This standard specifies test method that covers the atmospheric distillation of petroleum

products using a laboratory batch distillation unit to determine quantitatively the boiling range characteristics of such products as light and middle distillates, automotive spark-ignition engine fuels with or without oxygenates, aviation gasolines, aviation turbine fuels, diesel fuels, biodiesel blends up to 20 %, marine fuels, special petroleum spirits, naphthas, white spirits, kerosines, and Grades 1 and 2 burner fuels. The test method is designed for the analysis of distillate fuels; it is not applicable to products containing appreciable quantities of residual material. This test method covers both manual and automated instruments.


Subsector : N03 Registration Date : 2013-05-22Organization : ISSCountry : Serbia Latest Date for Comments : 2013-06-25Project ID : 00043833/0001 Draft for public enquiryICS :National Ref : SRPS B.H8.126:2013Title : Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark

Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet FluorescenceScope : This standard specifies test method that covers the determination of total sulfur in liquid

hydrocarbons, boiling in the range from approximately 25 to 400°C, with viscosities between approximately 0,2 and 20 cSt (mm 2/S) at room temperature.


Subsector : N03 Registration Date : 2013-05-22Organization : ISSCountry : Serbia Latest Date for Comments : 2013-06-25Project ID : 00043834/0001 Draft for public enquiryICS : 75.160.20National Ref : SRPS B.H2.127:2013Title : Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-

Ignition EnginesScope : This specification covers a fuel blend, nominally 75 to 85 volume % denatured fuel ethanol

Scope : (Ed75-Ed85) and 25 to 15 additional volume % hydrocarbons for use in ground vehicles with automotive spark-ignition engines. Fuel ethanol (Ed75-Ed85) shall conform to the performance requirements prescribed. Fuel ethanol (Ed75-Ed85) shall be visually free of sediment and suspended matter. The hydrocarbon/aliphatic ether blend content, vapour pressure, acidity, pH requirements, gum content, inorganic chloride, water requirements, copper requirements, and sulphur requirements shall be tested to meet the requirements prescribed.


Subsector : N03 Registration Date : 2013-05-22Organization : ISSCountry : Serbia Latest Date for Comments : 2013-06-25Project ID : 00043835/0001 Draft for public enquiryICS : 75.160.20National Ref : SRPS B.H2.128:2013Title : Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use

as Automotive Spark-Ignition Engine FuelScope : This specification covers nominally anhydrous denatured fuel ethanol intended to be

blended with unleaded or leaded gasolines at 1 to 10 volume % for use as automotive spark-ignition engine fuel covered by Specification D4814. spark-ignition engine fuel covered by Specification D4814. The significance of this specification is shown in Appendix X1.


Subsector : N03 Registration Date : 2013-05-31Organization : AENORCountry : SpainProject ID : P0041403/0001 Project EstablishedICS :National Ref : PNE 51603Title : Bitumen and bituminous binders. Framework for specifying anionic bituminous

emulsionsScope : This national standard specifies the requirements of the performance of different types of

anionic bituminous emulsions which are suitable for use in the construction and maintenance of roads, pavements of airports and other paved areas. It applies to emulsions of bitumen, or cut back bitumen and to emulsions of polymer modified bitumen, or of polymer-modified cut back bitumen, which also includes latex modified bituminous emulsions. The structure to specify the anionic bituminous emulsions of this national standard provides a basis for quality between supplier and customer agreements.



Subsector N05: TEXTILES

Subsector : N05 Registration Date : 2013-05-15Organization : LST Draft Issue Date : 2013-06-05Country : Lithuania Latest Date for Comments : 2013-08-04

Project ID : 10001381/0001Draft for public

enquiryICS : 97.160National Ref :Title : National and Presidential flags. Technical requirementsScope : This standard covers technical reguirements ( specifications) of textile materials from

natural or chemical fibers or their blends used for National and Presidential flags of Lithuania..



Subsector N07: SAWN TIMBER

Subsector : N07 Registration Date : 2013-05-31Organization : AENORCountry : SpainProject ID : P0041369/0001 Project EstablishedICS :National Ref : PNE 56810Title : Wood flooring. Installation. SpecificationsScope : This standard establishes general specifications for wood flooring installation in interior

uses. It also includes some specifications about control, inspection and maintenance of interior wood floorings. It does not apply to structural floor deckings, sport surfaces or applications, or to the use as support for other types of floor coverings or in exterior conditions.

Relatedness :National : REV/AMD UNE 56810:2010, UNE 56810:2010 ERRATUM:2011


Subsector N09: PLASTICS

Subsector : N09 Registration Date : 2013-05-27Organization : AFNORCountry : FranceProject ID : FA182643/0001 Project EstablishedICS :National Ref : PR NF T50-700-1Title : Plastics - Rotomoulding - Part 1 : Characterisation of meterials, including powders


Subsector : N09 Registration Date : 2013-05-27Organization : AFNORCountry : FranceProject ID : FA182644/0001 Project EstablishedICS :National Ref : PR NF T50-700-2Title : Plastics - Rotomoulding - Part 2 : Characterisation of rotomoulded items


Subsector : N09 Registration Date : 2013-05-31Organization : AENORCountry : SpainProject ID : P0041314/0001 Project EstablishedICS :National Ref : PNE 53016Title : Plastics. Determination of bulk factor of moulding materialsScope : This standard specifies a test method for determining of bulk factor of moulding materials.

Relatedness :National : REV/AMD UNE 53016:1982International : Not Equivalent to ISO 171:1980


Subsector N10: CORK

Subsector : N10 Registration Date : 2013-05-08Organization : IPQ Draft Issue Date : 2013-04-16Country : Portugal Latest Date for Comments : 2013-05-16Project ID : C0161301/0001 Draft for public enquiryICS : 79.100National Ref : prNP 2803-7Title : Cylindrical cork stoppers. Physical tests. Part 7: Determination of resistance to boiling

waterScope : This part of the NP 2803 specifies a test method for determining the resistance to boiling

water of the agglomerated cork stoppers, agglomerated cork stoppers with natural cork washers ("n" + "n"), stoppers for sparkling and gasified wines and of multipieces cork stoppers.


Subsector : N10 Registration Date : 2013-05-08Organization : IPQ Draft Issue Date : 2013-04-16Country : Portugal Latest Date for Comments : 2013-05-16Project ID : C0161302/0001 Draft for public enquiryICS : 79.100National Ref : prNP 4516Title : Bartop stoppers. Verification of gluingScope : The presente Standard specifies the method used for determining the efficacy of the gluing

in cork stoppers with capsule. It applies to all types of bartop cork stoppers



Subsector N21: GASEOUS FUELS AND COMBUSTIBLE GAS

Subsector : N21 Registration Date : 2013-05-31

Organization : BSICountry : United KingdomProject ID : 01301363/0001 Project EstablishedICS :National Ref : BS 4250Title : Specification for commercial butane and commercial propane



** End of Sector **




Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT


Subsector S01: ACOUSTICS AND SOUND INSULATION

Subsector : S01 Registration Date : 2013-05-21Organization : ASICountry : AustriaProject ID : 00025702/0001 Project EstablishedICS : 91.120.20National Ref : ÖNORM B 8115-2Title : Sound insulation and room acoustics in building construction - Part 2: Requirements for

sound insulation - BasicsScope : The present Austrian Standard shall be applied to buildings and parts thereof which are

intended for longer residence of humans or the use of which allows for rest. It covers particularly residential buildings, residential homes, office buildings, accommodation facilities, schools, kindergartens, hospitals, etc.This ÖNORM provides basic principles and methodology for the determination of the noise protection level.This ÖNORM does not deal with the protection against the outwards noise emitted by the building.


Subsector : S01 Registration Date : 2013-05-27Organization : AFNORCountry : FranceProject ID : FA182507/0001 Project EstablishedICS :National Ref : PR NF S31-010Title : Acoustics - Environmental noise characterization and measurement - Special measuring

methods



Subsector S09: WATER QUALITY AND WATER SUPPLY

Subsector : S09 Registration Date : 2013-05-08Organization : NENCountry : NetherlandsProject ID : 50001826/0001 Project EstablishedICS : 13.060.70National Ref : NEN 9407:2013 Concept nlTitle : Water - Hydrobiology - PhytoplanktonScope : In ecological studies, the (relative) density of different kinds and/or groeps of plankton is

important. During testing two problems occur: 1. taking representative and quantitative samples; 2. numerical evaluation of a large amount of small organisms in these samples. This clarification the backgrounds of the determination of the density, biovolume and size structure of zooplankton in surface water samples. The described method is suitable for the determination of the composition of Cladocera, Copepoda and Rotifera.


Subsector : S09 Registration Date : 2013-05-08

Organization : NENCountry : NetherlandsProject ID : 50001827/0001 Project EstablishedICS : 13.060.70National Ref : NEN 9408:2013 Concept nlTitle : Water - Hydrobiology - AlgaeScope : Methods for the sampling and analysis of decorational algae and the registration of meta

data. The standard is applicable to decorational algae in fresh or brackish water, still or running waters.


Subsector : S09 Registration Date : 2013-05-08Organization : NENCountry : NetherlandsProject ID : 50001828/0001 Project EstablishedICS : 13.060.70National Ref : NEN 9409:2013 Concept nlTitle : Water - Hydrobiology - DiatomsScope : Methods for the sampling and analysis of diatoms and the registration of meta data. The

standard is applicable to diatoms in fresh or brackish water, still or running waters.


Subsector : S09 Registration Date : 2013-05-08Organization : NENCountry : NetherlandsProject ID : 50001829/0001 Project EstablishedICS : 13.060.70National Ref : NEN 9410:2013 Concept nlTitle : Water - Hydrobiology - Zooplankton in water and surface waterScope : Methods for the sampling and analysis of zooplankton samples and the registration of meta

data. The standard is applicable to zooplankton in fresh or brackish water, still or running waters.


Subsector : S09 Registration Date : 2013-05-08Organization : NENCountry : NetherlandsProject ID : 50001830/0001 Project EstablishedICS : 13.060.70National Ref : NEN 9411:2013 Concept nlTitle : Water - Hydrobiology - Vegetation in surface waterScope : Methods for the sampling and analysis of vegetation in surface water and the registration of

meta data. The standard is applicable to zooplankton in fresh or brackish water, still or running waters.

Relatedness :

National : New

Subsector : S09 Registration Date : 2013-05-08Organization : NENCountry : NetherlandsProject ID : 50001831/0001 Project EstablishedICS : 13.080.05National Ref : NEN 5717:2013 Concept nlTitle : Soil - Sediment - Strategy for the preliminary study for exploratory and main surveyScope : This standard gives guidance for the execution of preliminary investigation preceding

preliminary site investigation of sediment. The purpose of preliminary study is to collect relevant information of the location from owner, government and other important parties.


Subsector : S09 Registration Date : 2013-05-27Organization : AFNORCountry : FranceProject ID : FA182801/0001 Project EstablishedICS :National Ref : PR NF T90-431Title : Water quality - Detection and enumeration of Legionella spp and Legionella

pneumophilia - Method by direct inoculation and after concentration by membrane filtration of centrifugation



Subsector S10: SURGICAL IMPLANTS

Subsector : S10 Registration Date : 2013-05-27Organization : AFNORCountry : FranceProject ID : FA182585/0001 Project EstablishedICS :National Ref : PR NF S94-080-4Title : Surgical implants - Titanium alloy Ti 6 AI 4V - Part 4 : semi-finished products obtained

by forging or by machining

Relatedness :National : REV/AMD NF S94-080-4:200712 (S94-080-4)


Subsector S19: FIRST AID EQUIPMENT AND RESCUE SYSTEMS

Subsector : S19 Registration Date : 2013-05-31Organization : BSICountry : United KingdomProject ID : 01301472/0001 Project EstablishedICS :

National Ref : BS 8599-2Title : Motor Vehicle First Aid Kits. Specification of equipment required

and positioning in vehicles



Subsector S23: PERSONAL & PROPERTY PROTECTION AGAINST AGGRESSION/ BURGLARY

Subsector : S23 Registration Date : 2013-05-08Organization : NENCountry : NetherlandsProject ID : 50001817/0001 Project EstablishedICS : 13.310National Ref : NEN 8131:2013 Concept nlTitle : Alarm systems - Intruder and hold-up systems - System and quality requirements and

application guidelines based on the European standards for intruder and hold-up alarm systems

Scope : Alarm systems - Intruder and hold-up systems - System and quality requirements and application guidelines based on the European standards for intruder and hold-up alarm systems



Subsector S24: SOIL QUALITY

Subsector : S24 (Secondary Subsector)

Registration Date : 2013-05-08

Organization : NENCountry : NetherlandsProject ID : 50001831/0001 Project EstablishedICS : 13.080.05National Ref : NEN 5717:2013 Concept nlTitle : Soil - Sediment - Strategy for the preliminary study for exploratory and main surveyScope : This standard gives guidance for the execution of preliminary investigation preceding

preliminary site investigation of sediment. The purpose of preliminary study is to collect relevant information of the location from owner, government and other important parties.



Subsector S26: ENVIRONMENTAL MANAGEMENT

Subsector : S26 Registration Date : 2013-05-21Organization : ASICountry : AustriaProject ID : 00025695/0001 Project EstablishedICS : 13.020.40National Ref : ONR ISO/TS 14067

Title : Carbon footprint of products -- Requirements and guidelines for quantification and communication (ISO/TS 14067:2013)

Scope : This International Standard specifies principles, requirements and guidelines for the quantification and communication of the carbon footprint of a product (CFP), based on International Standards on life cycle assessment (ISO 14040 and ISO 14044) and on environmental labels and declarations (ISO 14020, ISO 14024, ISO 14025). Requirements and guidelines for the quantification and communication of a partial carbon footprint of a product (partial CFP) are also provided. This International Standard is applicable to CFP studies and different options for CFP communication based on the results of such studies. Where the results of a CFP study are reported according to this International Standard, procedures are provided to support both transparency and credibility and also to allow for informed choices. This International Standard also provides for the development of CFP-product category rules (CFP-PCR), or the adoption of product category rules (PCR) that have been developed in accordance with ISO 14025 and that are consistent with this International Standard. This International Standard addresses only one impact category, climate change. Offsetting is outside of the scope of this International Standard.



** End of Sector **




Sector T : TRANSPORT, MECHANICAL HANDLING AND PACKAGING


Subsector T01: SHIPBUILDING AND MARITIME STRUCTURES

Subsector : T01 Registration Date : 2013-05-31Organization : AENORCountry : SpainProject ID : P0041371/0001 Project EstablishedICS :National Ref : PNE 27441Title : Civil shipbuilding and ship repairing. Selective lists. Piping and fittings: Slip-on steel

flanges.Scope : This standard deals with the determination of sizes, details and material qualities for slip-on

steel flanges, suitable for installation on sea-going vessels fulfilling their normal service requirements.


Subsector : T01 Registration Date : 2013-05-31Organization : AENORCountry : SpainProject ID : P0041372/0001 Project EstablishedICS :National Ref : PNE 27442Title : Civil shipbuilding and ship repairing. Selective lists. Piping and fitting: Loose flange with

ring.Scope : This standard defines the selection of loose flanges with ring of preferred use for the

fabrication and assembling of pipe systems and services in sea-going vessels and other marine crafts, fulfilling their normal service requirements


Subsector : T01 Registration Date : 2013-05-31Organization : AENORCountry : SpainProject ID : P0041373/0001 Project EstablishedICS :National Ref : PNE 27443Title : Civil shipbuilding and ship repairing. Selective lists. Piping and fittings: Loose flange with

neck collar.Scope : This standard defines the selection of loose flanges with neck collar of preferred use for the

fabrication and assembling of pipe systems and services in sea-going vessels and other marine crafts, fulfilling their normal service requirements


Subsector : T01 Registration Date : 2013-05-31Organization : AENORCountry : SpainProject ID : P0041374/0001 Project EstablishedICS :National Ref : PNE 27488

Title : Civil shipbuilding and ship repairing. Selective lists. Piping and fittings: ASTM slip-on steel flange.

Scope : This standard defines the selection of ASTM slip-on steel flanges of preferred use for the fabrication and assembling of pipe systems and services in sea-going vessels, specifying the geometry, dimensions, and material for these steel flat flanges, fulfilling their normal service requirements.


Subsector : T01 Registration Date : 2013-05-31Organization : AENORCountry : SpainProject ID : P0041375/0001 Project EstablishedICS :National Ref : PNE 27663Title : Civil shipbuilding and ship repairing. Standardised components. Pipe supports: One leg

type "A" flat bar pipe support with flat bar pipe clamp.Scope : This standard specifies the design, dimensions and technical requirements for one leg type

"A" flat bar pipe support with flat bar pipe clamp suitable for installation on sea-going vessels fulfilling normal service requirements



Subsector T03: ROAD VEHICLES

Subsector : T03 (Secondary Subsector)


Organization : BSICountry : United KingdomProject ID : 01301472/0001 Project EstablishedICS :National Ref : BS 8599-2Title : Motor Vehicle First Aid Kits. Specification of equipment required

and positioning in vehicles


Subsector : T03 Registration Date : 2013-05-08Organization : NENCountry : NetherlandsProject ID : 50001815/0001 Project EstablishedICS : 43.120National Ref : NEN 9140:2013 Concept nlTitle : Safe working on e-vehiclesScope : NEN 9140 contains specific requirements for safe working on e-vehicles by removing

electric hazards, storage of (probably) damaged e-vehicles en electric parts of e-vehicles.


Subsector : T03 Registration Date : 2013-05-29Organization : TSECountry : TurkeyProject ID : tst04457/0001 Project EstablishedICS : 01.040.43National Ref :Title : Road Vehicles- Types- Terms and DefinitionsScope : This standard covers terms, definitions and classification of road vehicles.



Subsector T09: MATERIALS HANDLING AND STORAGE EQUIPMENT

Subsector : T09 Registration Date : 2013-05-03Organization : SFS Draft Issue Date : 2011-03-16Country : Finland Latest Date for Comments : 2011-05-16Project ID : 002010-2/0001 Draft for public enquiryICS :National Ref :Title : Tanks and IBC-packagings for flammable liquids. Tanks are used for the transfer of the

flammable fluids on the sites and farms without emptying tanks. IBC –packagings are used for transportation by road. Cylindrical, aboveground metallic tanks with a capacity between 450 l and 1000 l.



Subsector T11: STEEL WIRE ROPES

Subsector : T11 Registration Date : 2013-05-10Organization : TSECountry : TurkeyProject ID : tst01228/0001 Project EstablishedICS : 53.020.99National Ref :Title : Steel Wire Rope JacksScope : This standard covers steel wire rope jacks.

Relatedness :National : NewEuropean : Modified DIN 15401-1:1982

Subsector : T11 Registration Date : 2013-05-10Organization : TSECountry : TurkeyProject ID : tst01228/0001 Project EstablishedICS : 53.020.99National Ref :Title : Steel Wire Rope Jacks

Scope : This standard covers steel wire rope jacks.







Subsector T12: INDUSTRIAL TRUCKS

Subsector : T12 Registration Date : 2013-05-27Organization : AFNORCountry : FranceProject ID : FA182822/0001 Project EstablishedICS :National Ref : PR NF H96-203Title : Machines for compacting waste materials or recyclable fractions - Compactors -

Interface between the static compactor and the container - Functional dimensions and specific requirements



Subsector T14: PACKAGING



Organization : IPQ Draft Issue Date : 2013-04-16Country : Portugal Latest Date for Comments : 2013-05-16

Project ID : C0161301/0001 Draft for public enquiryICS : 79.100National Ref : prNP 2803-7Title : Cylindrical cork stoppers. Physical tests. Part 7: Determination of resistance to boiling

waterScope : This part of the NP 2803 specifies a test method for determining the resistance to boiling

water of the agglomerated cork stoppers, agglomerated cork stoppers with natural cork washers ("n" + "n"), stoppers for sparkling and gasified wines and of multipieces cork stoppers.




Organization : IPQ Draft Issue Date : 2013-04-16Country : Portugal Latest Date for Comments : 2013-05-16Project ID : C0161302/0001 Draft for public enquiryICS : 79.100National Ref : prNP 4516Title : Bartop stoppers. Verification of gluingScope : The presente Standard specifies the method used for determining the efficacy of the gluing

in cork stoppers with capsule. It applies to all types of bartop cork stoppers



Subsector T20: TRAM- AND RAILWAY ENGINEERING

Subsector : T20 Registration Date : 2013-05-31Organization : ASROCountry : RomaniaProject ID : 13353-4_/0001 Project EstablishedICS :National Ref : SR 13353-4:2013Title : Public urban passenger transport. Tramway track. Part 3: General design specification

on superstructure

Relatedness :National : REV/AMD SR 13353-4:1997

Subsector : T20 Registration Date : 2013-05-31Organization : UNMZ Draft Issue Date : 2013-05-30Country : Czech Republic Latest Date for Comments : 2013-06-30Project ID : 73005313/0001 Project EstablishedICS :National Ref :Title : Railway level crossings and pedestrian crossingsScope : The aim of the amendment Z3 is ensuring safety at railway level crossings and pedestrian

crossings.

Relatedness :

National : REV/AMD Amendment Z3 of ČSN 73 6380 (2004)

Subsector : T20 Registration Date : 2013-05-31Organization : UNMZ Draft Issue Date : 2013-07-30Country : Czech Republic Latest Date for Comments : 2013-09-30Project ID : 73009213/0001 Project EstablishedICS :National Ref :Title : Railway level crossings and pedestrian crossingsScope : The aim of the amendment Z4 is ensuring safety at railway level crossings and pedestrian

crossings.

Relatedness :National : REV/AMD Amendment Z4 of ČSN 73 6380 (2004)

Subsector : T20 Registration Date : 2013-05-27Organization : AFNORCountry : FranceProject ID : FA182390/0001 Project EstablishedICS :National Ref : PR NF F31-118Title : Railway rolling stock - Vandal-proof covering - Characteristics and tests

Relatedness :National : REV/AMD NF F31-118:199211 (F31-118)

Subsector : T20 Registration Date : 2013-05-27Organization : AFNORCountry : FranceProject ID : FA182401/0001 Project EstablishedICS :National Ref : PR NF F01-281-2Title : Railway rolling stock - Parts in fibre-reinforced thermosetting composites - Part 2 : fire

behaviour


Subsector : T20 Registration Date : 2013-05-27Organization : AFNORCountry : FranceProject ID : FA182402/0001 Project EstablishedICS :National Ref : PR NF F01-281-1Title : Railway rolling stock - Parts in fibre-reinforced thermosetting composites - Part 1 :

specifications, test methods, manufacturing, qualification and assessment of conformity


Subsector : T20 Registration Date : 2013-05-17

Organization : TSECountry : TurkeyProject ID : tst03034/0001 Project EstablishedICS : 43.040.50National Ref :Title : Road vehicles - Suspension systems - Shock absorbersScope : This standard covers the telescopic and strut shock absorbers used at suspension systems of

road vehicles and specifies their identifications, classifications, sampling, inspection, testing and marketing.

Relatedness :National : NewInternational : Modified JASO C602:2001

Subsector : T20 Registration Date : 2013-05-17Organization : TSECountry : TurkeyProject ID : tst03034/0001 Project EstablishedICS : 43.040.50National Ref :Title : Road vehicles - Suspension systems - Shock absorbersScope : This standard covers the telescopic and strut shock absorbers used at suspension systems of

road vehicles and specifies their identifications, classifications, sampling, inspection, testing and marketing.

Relatedness :National : NewInternational : Modified JASO C611:1993


** End of Sector **

2011-06

List of non-electrotechnical subsectors

Sector A: Services

Subsector Title ISO/TC CEN/TC

reference reference

A01 Tourist services / 329; CEN/WS ETO

A02 Cleaning services / 328

A03 Postal services / 331

A04 Transportation services / 320; CEN/WS 016; CEN/WS SCUTUM

A05 Maintenance services / 319

A06 Building and construction services / 330

A07 Translation services /

A08 Funeral services / CEN/BT/TF 139

A09 Facility management / 348

A10 Services of Real Estate Agents / CEN/BT/TF 180; 373

A11 Security Services / CEN/BT/TF 167; 391; 384; 370; CEN/WS 044; CEN/CLC/TC 4

A12 Consultancy Services / 395; 381

A13 Expertise Services / 405

A14 Aesthetic Services / 403;409

A99 Undetermined / CEN/WS 002; CEN/WS 004; CEN/WS 037; CEN/WS 039; CEN/WS 041; CEN/WS 051; 375; 374; 376; 385; 404

Sector B: Building and construction


reference reference

B01 Fire protection 21 70; 72; 191; 192

B02 Structures 59; 98 166; 167; 250; 277; 346; 349; 284; 288; 297; 340

B03 Concrete 71 104; CEN/WS 009

B04 Cement 74; 77 51

B05 Fire tests 92 127

B06 Gypsum / 241

B07 Glass 160 129

B08 Doors and windows 162 33

B09 Thermal matters 163 88; 89; 371; CEN/BT WG 173; CEN/WS 036

B10 Timber structures 165 124

B11 Metal structures 167 135

B12 Masonry 179; 196 125; 246

B13 Solar energy 180 312

B14 Geotechnics 182 341; 396

B15 Sanitary appliances / 163; 7

B16 Taps / /

B17 Lighting equipment and lighting / 50; 169 application technology

B18 Scaffolding / 53

B19 Ceramic tiles 189 67

B20 Drainage equipment / 165

B21 Baths / /

B22 Wallcoverings / 99

B23 District heating / 107

B24 Auxiliary and handicraft work / /

B25 Gas distribution installation and / 234; 235; 282 related equipment

B26 Road building and maintenance / 178; 227

B27 Waterproofing materials / 128; 254; 361; 314

B28 Floor coverings 38/SC 12 134

B29 Aggregates / 154

B30 Floor and surfacing / 217; 303; 323; 390

B31 Heating systems in buildings / 228; 247

B32 Precast concrete products / 177; 229

B33 Building design 205 315; 325; 388

B34 Building and construction – Environmental aspect 350; 351

B99 Undetermined / /

Sector C: Chemicals, chemical engineering and food products


reference reference

C01 Food products 34 174; 275; 302; 360; 307; 327; 338; 387; CEN/WS 008; CEN/WS 018; CEN/WS 054

C02 Paints and related products 35 139; 298; 173

C03 Chemistry 47 317; 363

C04 Laboratory glassware 48 332

C05 Lac / /

C06 Essential oils 54 /

C08 Pesticides 81 /

C09 Surfactants 91 276

C10 Starch 93 /

C11 Tobacco 126 401

C12 Glass plant / /

C13 Fertilizers 134 223; 260

C16 Wood preservatives / /

C17 Trees and plants / /

C18 Adhesives / 193

C19 Chemical analysis 201; 202 382; 347

C20 Explosives and firework / 212; 321

C21 Cosmetics 217 392

C22 Bio-Based products / 411

C99 Undetermined / 386

Sector F: Fundamental standards


reference reference

F01 Technical drawings 10 /

F02 Units & symbols 12 /

F03 Preferred numbers 19 /

F04 Sieves 24 /

F05 Measuring instruments 30; 113 92; 171; 176; 237;

294; 318; 244; 367; 141; CEN/WS 011

F06 Terminology principles 37 /

F07 Documentation and information 46 304; CEN/WS 024 CEN/WS 010 CEN/WS 023 CEN/WS 028 CEN/WS 014 CEN/WS 050 CEN/WS 006 368

F08 Surfaces / 290

F09 Banking 68 /

F10 Statistics 69 /

F12 Information processing systems 204 224; 225; 251; 278; CEN/WS CPF CEN/WS CIS CEN/WS ODR CEN/WS CID 287; 311; 365

F13 Environmental tests / /

F14 Graphical technology, 130 / sign-boards and nameplates

F15 Material testing in general 135 138; CEN/WS 007 CEN/WS 021 CEN/WS 033

F16 Graphical symbols 145 /

F17 Administrative documents 154 CEN/WS MMU

F18 Micrographics 171 /

F19 Optics 172; 187 123; 170

F20 Quality assurance 176 CEN/CLC/TC1 CEN/CLC/WG QS CEN/WS 030 362

F21 Value analysis and project / 279 network

F22 Logistics / 379; 273

F23 Energy 203 CEN/CLC/JWG 1; CEN/CLC/JWG 2;

CEN/CLC/JWG 3; CEN/CLC/JWG 4; CEN/WS 027

F99 Undetermined / 389; CEN/WS 057; CEN/WS 058; CEN/WS 060

Sector H: Products for household and leisure use


reference reference

H01 Cinematography 36 372

H02 Photography 42 /

H03 Consumer questions / 291

H04 Sports equipment 83 136

H05 Oil and gas burners / 47; 131

H06 Horology 114 /

H07 Space heating 116 62; 110; 130; 179; 180

H08 Sizing systems 133; 137 /

H09 Furniture 136 207

H10 Sewing machines 148 /

H11 Heater controls 161 58

H12 Ceramic and glass-ware for food 166 /

H13 Jewellery 174 CEN/WS 047

H14 Caravans 177 245

H15 Toys 181 52

H17 Oil stoves / 46

H18 Central heating boilers / 48; 57; 109; 269

H19 Non-electric cookers and barbecues / 49; 281; 295

H22 Smokers’ lighters and matches / 355; 87

H23 Ladders / 93

H24 Tactile danger warnings / /

H25 Large gas appliances / 106; CEN/CLC/JWG FCGA

H26 Sealing materials / 108; 208

H27 Educational equipment / /

H28 Hunting 191 /

H29 Heat pumps / 113

H30 Equipment for children / 252

H31 Dedicated LPG appliances / 181

H32 Culinary utensils 186 194

H33 Footwear (excluding protective / 309 footwear)

H34 Child safety / CEN/BT/WG 117 398

H99 Undetermined / 299; 364; 369; 402

Sector I: Mechanical engineering


reference reference

I01 Screw threads 1 /

I02 Fasteners 2 185

I03 Limits & fits / /

I04 Rolling bearings 4 /

I05 Iron pipes 5 203

I06 Pressure vessels 11 54

I07 Shafts 14 /

I08 Agricultural machines 23 144, 334

I09 Small tools 29 213

I10 Splines / /

I11 Machine tools 39 142; 143; 145; 255

I12 Pulleys & belts 41 188

I13 Gas containers 58 23; 286

I14 Gears 60 /

I15 Equipment for petroleum industry 67 12

I16 Internal combustion engines 70; 192 270

I17 Machinery in general 72; 199 114; 153; 214; 313 (including safety) 271, 337; 399; 397 CEN/WS 025

I18 Mining 82 196

I19 Nuclear energy 85 /

I20 Refrigeration 86 44; 182

I21 Chains and chain wheels 100 /

I22 Vacuum technology 112 /

I23 Pumps 115 197

I24 Industrial fans 117 356

I25 Compressors 118 232

I26 Plain bearings 123 /

I27 Earth moving and construction 127; 195 151 equipment

I28 Fluid power 131 /

I29 Gas cleaning / 195

I30 Air distribution / 156

I31 Valves 153; 185 69; 236; 105

I32 Flanges / 74

I33 Information processing in 184 310 automation

I34 Non-ferrous metallic pipes / /

I35 Leisure and recreational machines / 152

I36 Thermoprocessing technology / 186

I37 Printing and paper machines / 198

I38 Leather production, tannery and / 200; 201 related machinery

I39 Machines for metal processing / 202; 322

I40 Industrial piping networks / 267

I41 Membrane filters / 272

I42 Potentially explosive atmospheres / 305

I43 Hydrogen energy 197 /

I44 Nanotechnologies 229 352

I99 Undetermined / CEN/CLC/JTF PE; CEN/CLC/TC 2; 65, 157; CEN/WS 059

Sector M: Metallic materials


reference reference

M01 Steel 17 CEN/TC 342; 344; ECISS/TC 6 ECISS/TC 7 ECISS/TC 9 ECISS/TC 10 ECISS/TC 11 ECISS/TC 12 ECISS/TC 13 ECISS/TC 15 ECISS/TC 19 ECISS/TC 20 ECISS/TC 21 ECISS/TC 22 ECISS/TC 23 ECISS/TC 24 ECISS/TC 26 ECISS/TC 27 ECISS/TC 28 ECISS/TC 29 ECISS/TC 5 ECISS/TC 14 ECISS/TC 100 ECISS/TC 102 ECISS/TC 103 ECISS/TC 104 ECISS/TC 105 ECISS/TC 106 ECISS/TC 107 ECISS/TC 108 ECISS/TC 109 ECISS/TC 110

M02 Zinc / 209

M03 Foundry technology, 25 190; ECISS/TC 31 ECISS/TC 111 including cast iron

M04 Copper 26 133

M05 Welding 44 121

M06 Dimensions of wrought products / /

M07 Manganese and chromium 65 /

M08 Light alloys 79 132

M09 Iron ores 102 /

M10 Metallic coatings 107 240

M11 Powder metallurgy 119 /

M12 Aluminium ores 129 /

M13 Ferroalloys 132 /

M14 Nickel 155 /

M15 Metallic corrosion 156 262; 219

M16 Mechanical tests for metals 164 ECISS/TC 1 ECISS/TC 2 ECISS/TC 101

M17 Heavy metal ores 183 /

M18 Metal wire products / ECISS/TC 30; CEN/BT/TF 196; 378; 407

M20 Tin and tin alloys / 220

M21 Precious metals / 283

M22 Lead and lead alloys / 306

M99 Undetermined / /

Sector N: Non-metallic materials


reference reference

N01 Paper and board 6 172

N02 Solid fuels 27 335; 343;383; CEN/WS 019

N03 Petroleum products 28 19; 336; CEN/WS 038; CEN/WS 061

N04 Refractories 33 187

N05 Textiles 38 189; 248

N06 Rubber 45 218; 366 CEN/WS 003

N07 Sawn timber 55 38; 175

N08 Mica / /

N09 Plastics 61 249

N10 Cork 87 /

N11 Wood-based panels 89 112

N12 Timber products 99 /

N13 Leather 120 289

N14 Plastics pipes 138 155

N17 Fluorspar 175 /

N18 Glass-fibre reinforced plastics / /

N19 Tapes / 253

N20 Ceramics 206 184

N21 Gaseous fuels and combustible gas 158; 193 238; 408

N22 Feather and related materials / 222

N23 Diamond / 410

N99 Undetermined / /

Sector S: Health, environment and medical equipment


reference reference

S01 Acoustics and sound 43 126; 211 insulation

S02 Transfusion equipment 76 /

S03 Syringes 84 /

S04 Protective clothing and equipment 94 85; 158; 159; 160; 161; 162; CEN/WS 026; CEN/WS 043

S05 Dentistry 106 55

S06 Vibration & shock 108 231

S07 Anaesthetic and respiratory 121 215 equipment

S08 Air quality 146 137; 243; 264; CEN/CLC/JWG CMI

S09 Water quality and water supply 147 164; 230; CEN/WS 001 CEN/WS 034

S10 Surgical implants 150 285; CEN/CLC/JWG AIMD

S11 Contraceptives 157 /

S12 Gas analysis / /

S13 Ergonomics 159 122

S14 Prosthetics 168 /

S15 Surgical instruments 170 /

S16 Aids for the disabled 173 293

S17 Respiratory protective devices / 79

S18 Sterilization of equipment 198 102; 204

S19 First aid equipment and rescue systems / 239

S20 Waste collection, handling and / 183 transportation

S21 Laboratory medicine, clinical 194 140; 206; 233; pathology and biosafety 257; 258; 316; CEN/CLC/TC 3; CEN/WS 031; CEN/WS 053; CEN/WS 055

S22 Energy saving / CEN/WS 005 CEN/WS 015

S23 Personal & property protection against aggression/Burglary protection / 263

S24 Soil quality 190 345; CEN/WS 032

S25 Chemical disinfectants and / 216 antiseptics

S26 Environmental management 207 CEN/TC 406; CEN/WS 040

S27 Waste - Characterization, treatment / 292; 308; and streams CEN/BT/TF 120

S28 Demining / CEN/WS 029 CEN/WS 013

S99 Undetermined / 205; CEN/BT/TF 127 394; 259; 357; 358; 359; 380; 400; CEN/WS PCEC CEN/WS 012 CEN/WS 020

Sector T: Transport, mechanical handling and packaging


reference reference

T01 Shipbuilding and maritime 8; 188 15; 300 structures

T02 Aerospace 20 274; AECMA; ECSS ;377

T03 Road vehicles 22 301; 326 CEN/WS IMA

T04 Tyres 31 /

T05 Pallets 51 /

T06 Metal and plastic containers 52 210; 221; 265; 266; 268; 296 393

T07 Glass containers 63 /

T08 Cranes 96 147

T09 Materials handling and 101 148; 149 storage equipment

T10 Freight containers 104 119; 280

T11 Steel wire ropes 105 /

T12 Industrial trucks 110 150; 324

T13 Lifting chains, hooks and ropes 111 168

T14 Packaging 122 261; 120

T15 Cycles 149 333

T16 Lifts & escalators 178 10; 242

T17 Builders hoists / /

T18 Elevating platforms / 98

T19 Road safety / 226; 339

T20 Tram- and railway engineering / 256; / CEN/CLC/WG FPR

T21 Packaging machines / 146

T22 Off-road vehicles / 354

T99 Undetermined / CEN/WS TAF

Sector Z: Information technology


Z01 Radiocommunication for IT / /

Z02 Telephony, telegraphy for IT / CEN/CLC - ETSI

Z03 Common O.S.I. activities / CEN/CLC - EWOS

Z99 Undetermined / 353; CEN/WS ADN; CEN/WS AUT; CEN/WS BII; CEN/WS CAT; CEN/WS CST; CEN/WS CTC; CEN/WS DFA; CEN/WS DIR; CEN/WS DIS; CEN/WS DPA; CEN/WS DPP; CEN/WS EBE; CEN/WS ECH; CEN/WS ECO; CEN/WS EFI; CEN/WS EMD; CEN/WS ESI; CEN/WS ESR; CEN/WS EUR; CEN/WS FAS; CEN/WS FIN; CEN/WS FS2; CEN/WS FUN; CEN/WS GEN; CEN/WS HIC; CEN/WS ICT; CEN/WS IEC; CEN/WS IHM; CEN/WS INV2; CEN/WS ISD; CEN/WS JXF; CEN/WS KMA; CEN/WS LCT; CEN/WS LTS; CEN/WS MDC; CEN/WS MEE; CEN/WS MES; CEN/WS MET; CEN/WS MLX; CEN/WS MMI; CEN/WS NEA; CEN/WS NOM; CEN/WS ORC; CEN/WS POR; CEN/WS QIS; CEN/WS SAN; CEN/WS SCE; CEN/WS TEX; CEN/WS TWE; CEN/WS UDP; CEN/WS URI; CEN/WS WAC;

CEN/WS XFS; CEN/WS XML; CEN/WS eGo; CEN/WS eIN; CEN/WS ePR

monthly notifications register · information procedure page 2 monthly notifications register...

Documents