Pro-formance

mcB / fiBerflex

gem

flair

Tradie

sk8ey

flOW

shaddOW

gun

s.w.a.t.

fanG

semi-Gun

da-Grom

dart

misfitshapes.com

“To me being a shaper is all about progression; working closely with surfers to better my boards, always thinking about future designs and innovation, and not ever being content with perfecting mediocrity. I’ve learnt the fundamentals of the art and I’m committed to separating my boards from the pack, like a true misfit”

- Dave Howell

ProGressive surfBoards for ProGressive surfers

Introducing

The Pro-formance model is designed with pro-gressive surfing in mind. This high performance shortboard draws it’s responsiveness from its refined low volume foil

and deep single concave. This is the premier model in the Misfit range and is the most popular short-board amongst advanced surfers.

Wave Height: 2 - 6 ftSkill Level: Intermediate - Advanced

Available Between: 5’11 - 6’4

the pro-formance

PAGE 3

Introducing

The GEM is our new variation model of the original Proformance board. The main differences being a different rocker curve, which is flatter between your feet allowing more

drive and more curve through the entry allowing the nose of board to fit in the pocket of the wave. The model also has a slightly boxier rail making it a fairly forgiving, all round

board. Order 1” shorter and 1/16 thinner than Pro-formance board.

Wave Height: 2 - 6 ftSkill Level: Intermediate - Advanced

Available Between: 5’9 - 6’2

the gem

PAGE 4

Introducing

The S.W.A.T. model is designed for attacking those small wave days while still riding a conventional shortboard outline. There is added width in the nose and tail and the entry rocker is lowered to allow easy access onto waves. A slight hip and increase in the tail

rocker also allow release and pivot in turns. Order this board 1–2” shorter and 1/4” wider than your pro-formance board.

Wave Height: 1 - 4 ftSkill Level: Intermediate - Advanced

Available Between: 5’6 - 6’2

the s.w.a.t.

PAGE 6

Introducing

The Flair is our new high performance small board model. Designed to be ridden short, and for waves in the 2 - 5ft+ range, this board has a flatter rocker for paddling ease, but draws performance and responsiveness from the curvy planshape, double concave and vee in the tail

and super refined foil in last third of board. Ride 6 - 8” shorter and approx same width/ thickness as your proformance board.

Wave Height: 2 - 5 ftSkill Level: Intermediate - Advanced

Available Between: 5’3 - 5’10

the flair

PAGE 7

Introducing

The Fang is our next generation hybrid small board. It is a refined step up alternative of our existing small board model, the ‘flair’, for waves in the 4’ to 8’ range while maintaining maneuverability and

solid tube riding ability. It has a single concave running from entry to the back fin with the nose and tail pulled in from the original Flair. The Fang comes standard with a rounded pin to compliment

the shape and design. Ride 2” longer than regular Flair dimensions.

Wave Height: 4 - 8 ftSkill Level: Intermediate - Advanced

Available Between: 5’5 - 6’0

the fang

PAGE 8

Introducing

Great in punchy waves and for explosive surfing, the Shaddow is designed to be ridden 2” shorter and 1/2” wider than your pro-formance board. This model has a curvy yet clean plan shape for tight turns in the pocket and smooth rail-to-rail transitions. It also combines a low entry curve and increase in tail rocker with a

deep single concave for added drive and squirt off bottom hand turns.

Wave Height: 2 - 6 ftSkill Level: Intermediate - Advanced

Available Between: 5’8 - 6’2

the shaddow

PAGE 9

Introducing

The Semi-Gun is an extension of your short board, designed for bigger waves. These boards have increased length for paddling power and are refined through the nose and tail for hold in steep, powerful faces. The bottom shape is a single/ double

concave with a flat/ vee running through the tail. Order the semi-gun 4-8” longer than your pro-formance board. Also available in quad set up.

Wave Height: 4 - 9 ftSkill Level: Intermediate - Advanced

Available Between: 6’4 - 6’10

the semi-gun

PAGE 11

Introducing

Shaped on the basis of where you are planning to surf, the Gun is for bigger, heavier waves that require length anywhere up to 9’6”. They have increased thickness

for improved paddling and a slightly tapered rail for hold in heavy conditions. The bottom shape is a combination of flat/ double and vee. Order as

big as you are planning to go! Sizes range from 7’0.

Wave Height: 8ft +Skill Level: Intermediate - Advanced

Available Between: 7’0 +

the gun

PAGE 12

Introducing

This model is for frothing groms that eat, sleep and dream surfing! Refined from nose to tail with low volume, these high performance, super light blades

challenge and enable groms to go to the next level of their surfing and beyond! Da future is here groms, so stop looking and just get one!!!

Wave Height: 2 - 6 ftSkill Level: Beginner - Advanced

Available Between: 5’0 - 5’10

da grom

PAGE 13

Introducing

The TRADIE is our Pro-formance model for the bigger surfer who wants something progressive. The nose and the tail are still refined but there is additional foam carried out toward the rails and under the chest. The board has slightly shallower concaves but the same bottom curve as Pro-formance with adjusted nose and tail rockers to

suit a bigger surfer.

Wave Height: 2 - 6 ftSkill Level: Intermediate - Advanced

Available Between: 6’3 - 6’8

the tradie

PAGE 14

PAGE 16

Introducing

The Dart is the new semi-fish that is based on the fundamentals of a high performance shortboard but with increased width in the nose and tail. The outline is curvy for explosive

surfing in smaller waves and extra foam is kept to the rails for ease of paddle. These boards are designed for a thruster, quad or have the option of a 5-fin setup. Order this model

approx 4” shorter and around 3/4” wider than your pro-formance board.

Wave Height: 1 - 5 ftSkill Level: Intermediate - Advanced

Available Between: 5’6 - 6’2

the dart

PAGE 17

Introducing

The Sk8ey model is the new, explosive skateboard inspired fish for the summer. The outline is similar to the original Fish but flyers, extreme double/ vee concave and a quad fin setup have been added for increased drive and squirt in critical parts of the wave. Order the SK8ey around 8-10” shorter, approx 11/4” wider and about

1/4” thicker than your Pro-formance board.

Wave Height: 1 - 4 ftSkill Level: Intermediate - Advanced

Available Between: 5’0 - 5’8

the sk8ey

PAGE 18

Introducing

The Fish is designed for maximum fun in small to medium wave conditions. This model has low entry rocker and plenty of surface area for ease of paddling and planing over dead sec-tions. Deep double concave and vee in the tail also make this board fast and maneuverable. Order the fish 4-6” shorter, 1” wider and approx. 1/8” thicker than your pro-formance board.

Wave Height: 1 - 5 ftSkill Level: Beginner - Advanced

Available Between: 5’6 - 6’6

the fish

PAGE 19

Introducing

A tasty little addition to our summer series, this board is designed to easily paddle into small waves and hover over fat sections. It has a slight single concave running through

the entry and out the tail, comes standard with a quad fin setup and a crescent tail. Order approx 6” shorter, 1 ¼” wider and 1/8” thicker than your pro-formance board.

Wave Height: 1 - 4 ftSkill Level: Beginner - Advanced

Available Between: 5’3 - 6’0

the flow

PAGE 22

Introducing

The Misfit Custom Built board is the model personalized to your requirements. Modify tails, rails, curves, concaves, rocker, foil, length, thickness or width. This model allows you to get

creative and have more input into your new board.

custom built

PAGE 23

Introducing

The epoxy FiberFlex EPS is a completely custom surfboard shaped out of high density EPS foam with a parabolic carbon fiber frame to create a board with a high energy, rapid spring back resulting in ultimate speed and drive. The final process in manufacturing the board is the epoxy

laminate, which is glassed very similarly to a standard PU surfboard only that we use a high quality, UV resistant epoxy resin system. The epoxy resin system creates a highly flexible

laminate, resilient to cracking and fracturing and has a flexural life span 2-3 times a polyester resin. The technology greatly compliments the majority of the Misfit Shapes range, but is excep-

tional in high performance shortboards, small board hybrids and performance fishes.

fiberflex

PAGE 24

All performance shortboard, hybrid and fish models available in fiberflex EPS. Quad fin setup and FCS, Futures or fixed fins available in all models.

pro-formance

gun da-grom tradie dart sk8ey fish flow

gem swat flair fang shadow semi-gun

SurfersEllis Ericson Jordi Watson

Mitch Vanderveer

Art DirectionJosh Secomb, Danny Johnson - aestheticpoetry.com

PhotographyMatty J - thesealife.com.au

Murray and Barnaby - sproutdaily.com Zander Snape - zanderphotography.com.au

Chris Cooney

2/1329 pi t twatter rd, narrabeen nsw, austra l ia 2101 p. 02 99 133 334 | f . 02 9913 3336

info@misf i tshapes.com

misfitshapes.com