milestek 2013 winter/spring dealer catalog

92

Upload: -

Post on 10-Mar-2016

235 views

Category:

Documents


6 download

DESCRIPTION

Milestek Winter/Spring 2013 Dealer Catalog

TRANSCRIPT

Page 1: Milestek 2013 Winter/Spring Dealer Catalog
Page 2: Milestek 2013 Winter/Spring Dealer Catalog

7 a.m. to 6 p.m., Central Time, M-F, except holidays. Fax Orders: 940-484-9402 – 24 hours a day, 7 days a week

PHONE ORDERS AND TECHNICAL SERVICE: 1-800-524-7444 or 940-484-9400

INTRODUCTION

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T

Ordering Information

INTERNET ORDERS: www.milestek.com – 24 hours a day, 7 days a week

ORDERS: Telephone, fax or mail orders welcomed. Most items are in stock; Ifpartial shipment requested, shipping/handling charges will be addedto each shipment.

F.O.B. POINT: Shipping Point. Freight charges are added to invoice.

PRICES: Subject to change without notice.

PAYMENT TERMS:

Credit Cards:Visa, MasterCard, American Express and Discover accepted.

Prepayment: Money order, company or personal check (personal check willdelay order about 2 weeks).

Commercial Open Account: Net 30 terms extended to companies with approved credit. Openaccount may be set up by faxing, emailing or mailing trade andbank references.

Government: MilesTek Corporation is a small business concern. Government(federal, state, county, city school districts, etc.) purchase orders are accepted with Net 30 terms. Government IMPACVisa/Mastercard is accepted.

International: Prices are in United States Dollars and F.O.B. shipping point,excluding any applicable taxes, custom duties or permit fees.

Payment in Advance via one of the following methods is acceptable:

1. Bank Transfer - Wire Routing information is available byrequest. Please contact our Accounts Receivable department [email protected] or by phone 940-484-9400. Please add$25.00 to your wire transfer to cover our bank charge for thewire transfer.2. Cashier's Check, Certified Check or International MoneyOrder - Check must be payable in US Dollars. Sending check ormoney order via overnight courier will improve service.3. Company Check - Check must be drawn on a US Bank and issubject to MilesTek approval of sufficient funds.

WARRANTY:MilesTek warrants its products to be free from defects of workmanship and material. If any such defects occur,replacementwill be made without charge to our customers. This warranty doesnot cover normal wear and tear, or abuse. The warranty perioddepends upon the product.

RETURN POLICY: All returns must have MilesTek authorization with return authorizationnumber. All returns must be made within 30 days from shipmentdate and will be subject to a 20% restocking fee. RMA will beissued, but shipment of products back to MilesTek is customer’sresponsibility. Shipping charges for returns due to MilesTek error orevaluation for defect, will be covered at MilesTek’s expense. RMAwill be issued along with shipping label and instructions. ProductsMUST be in original packaging, not be damaged or marked on inany way, and contain all original piece parts. Any items that arereturned and are not in re-sellable condition will not be consideredfor credit. For full version of MilesTek’s return policy, visit ourwebsite at MilesTek.com.

TRADE MARKS: All trade marks referenced are the service marks or trademarks oftheir respective owners.

DISPUTE RESOLUTION: It is hereby agreed and understood that any dispute, difference ordisagreement of any kind whatsoever, whether statuary or contractual,which arises from the services/products provided or relates in anyway to the general business relationship of the parties to this agreement,shall be, as the sole available remedy, resolved through mediationor binding arbitration, rather than litigation. Any such mediation orarbitration shall be governed by the Federal Arbitration Act andconducted in accordance with the Rules of Mediation and Arbitration.

Quick Order:Instantly place items in your cart just by entering the part numbers.Multiple part number entry is supported. Just one click from anywhereon the site from the Acct/Order Management at the top of everyMilesTek.com page.

Page 3: Milestek 2013 Winter/Spring Dealer Catalog

Inventory Search:You can find the products you need quickly and easily. Search by keyword,MilesTek part number and even by manufacturer's part number.

Order Status:Our site now has a new order status function that allows customers toview the current status of any open or shipped order that was placedeither over the web or over the phone, and provides customers withthe ability to drill right down to the item detail level on each order.Our new order status function also allows customers to view theirassigned tracking numbers for all UPS shipments, and provides alink to allow customers to directly view tracking information forthese numbers through the UPS Tracking System.

Account Management:We have located all the account and order management tools withinone click from anywhere on our site. Just click on the Acct/OrderManagement link at the top of any page. Once you are logged intothe site, you can change passwords, contact information, and reviewpurchasing history.

Web Order Purchasing History:View web orders you've placed by date or invoice number and go toindividual orders to view all their detail.

Shipping Options:We’ve added the ability to select expedited shipping. Customers canalso enter their own UPS or FedEx account number for their order.UPS is MilesTek’s standard/preffered carrier.

Shopping Menu:Navigate easily throughout our site and go directly where you needto go fast with our new shopping menu.

Download Catalogs:Now you can download our latest catalogs and see our latest productseven before they hit your mailbox.

A More Intuitive Design:Our new stylish design is simple and easy to navigate. We've chosencolors that are easy on your eyes and page layouts that are clear andeasy to follow.

Technical Blogs, Videos and Information:Our new technical blog provides an interactive forum for technicaldiscussion regarding current and relevant industry trends. Check outour new application videos for MIL-AERO/MIL-STD-1553B andDS3 Telco Central Office business applications. Technical drawingsare available for many devices, cables and connectors.

Quick summary of some of our website’s features:

• Our websiteÊs Cable Assembly Wizard helps you find the assembly you need· Search by cable type and connector ends· Create a custom-length cable assembly, and place it in your cartto purchase.

· Same-Day Shipping!· Supports Metric (cm) or English (inch) lengths

• Find Adapters quickly and easily with our Adapter Wizard

• New homepage Quick-Order feature allows fast and easy orderingfrom any MilesTek catalog or milestek.com

• Over 10,000 products available, including products for Mil-Std-1553B,DS3 Telecom, and Ethernet Networking!

• Enhanced security features· PCI Compliant and high-encryption keeps your sensitive information 100% secure

We hope you find MilesTek.com providesthe excellent experience you deserve.

INTRODUCTION

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

For Expert Customer Service,Call Our Sales Team Today! 1

Easy Online Ordering

Page 4: Milestek 2013 Winter/Spring Dealer Catalog

INTRODUCTION The MilesTek Advantage

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T2

Dear Valued Customer, For over 30 years, MilesTek’s commitment to quality and service as acomplete connectivity solutions provider has helped MilesTek gain thetrust of thousands of commercial and residential IT/networking and AVsystem integration dealers all over the world. With our goal of always looking forward and improving, MilesTek isproud to introduce our new 88-page Winter-Spring 2013 Catalog,which contains an updated offering of our top selling core productsalong several new product solutions to meet the ever evolving demandsof our customers’ applications and projects. Organized sections includeNetworking, AV Distribution, Coaxial, Racks & Accessories, andCable Management. MilesTek makes a concerted effort to keep up with new industry trendsand technology for the benefit of our customers. HD video distributioncontinues to be a hot topic, specifically the ability to convert and extendHD signals further distances. We’re excited to feature in this catalogseveral new solutions that do just that, including new HDMI HDBaseT

devices allowing extension of HD signals over CAT5E/CAT6 up to 300ft., and new HDMI over Fiber devices that can push HD signals up to1,600 ft. with commonly used multimode fiber optic cabling! MilesTek’s HDMI converters are also very popular. We expanded theline with several new converters including SDI to HDMI and a uniqueHDMI Audio Extractor that takes audio from HDMI source andallows output of the audio signal via toslink, coaxial digital or 3.5mmstereo audio. Providing quality devices with technical support and at unbeatablevalue, AV distribution solutions continue to be area of success andfocus. SEE INSIDE BACK COVER of this catalog for new solutionsthat might fit your project requirements. Additionally, our special offer of “Free Freight on $750 Orders” stillremains. See back over for details.Technical expertise, customer service and unbeatable value –that’s the MilesTek Advantage.

Networking .............................. 3 - 15 CAT5E and CAT6 Bulk Cable Wall Plates and Jacks / Patch Cords and PanelsNetwork Ethernet Switches / Media Converters

Cable Management ................ 76 - 81 RHINO Label Printers / Surface Raceway SystemIn-Wall Raceway / Ducting / Tools / Cable Ties

Racks & Accessories ................ 64 - 75 Rack Enclosures / Wall Mount Racks / Rack ShelvesHorizontal Managers / Ladder Racks

AV Distribution ....................... 16 - 54 HDMI / VGA/ DVI / Component Video Composite Video / AVt Over CAT5 / Wall Plates

Coaxial .................................. 55 - 63 BNC Connectors and Adapters / Bulk Cable Cable Assemblies / Tools / Racks / Panels

Page 5: Milestek 2013 Winter/Spring Dealer Catalog

NETWORKING

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

For Expert Customer Service,Call Our Sales Team Today!

CAT5E/CAT6 Bulk, RJ45 Plugs

3

CAT5E Direct Burial Cable24 AWG / 4 Pair • Solid BC • 1000 ft.

PVC 1000’ PULL BOX PLENUM 1000’ PULL BOX30-50013-Black 30-50014-Black30-50013-Blue 30-50014-Blue30-50013-Gray 30-50014-Gray30-50013-Green 30-50014-Green30-50013-Orange 30-50014-White30-50013-Red 30-50014-Yellow30-50013-White ·30-50013-Yellow ·

DEALER PRICE DEALER PRICE $88.00 $180.00

PART # COLOR DEALER PRICE 30-50112 Black $164.00

CATEGORY UTP CABLEToday's advanced fast ether-net and gigabit computer net-works require CAT5E orCAT6 high-speed cabling todistribute data, voice andvideo. Our CAT5E cableswill handle bandwidth inten-sive applications up to 350MHz and beyond.The CAT6 standard addressesthe need for improving theperformance of twisted pair ca-bling to support emerging high-speed applications. Thetransmission parameter requirements exceed CAT5Eand are specified up to 550 MHz.

RJ45 and RJ11 Modular Plugs

50 ø" of gold plating

PART # DESCRIPTION DEALER PRICE 10-23063 RJ45 8C8P 2OP Solid $0.2210-23063-BP Bulk Pack (100) $19.0010-23061 RJ11 4C Solid/Stranded $0.2210-23061-BP Bulk Pack (100) $19.0010-23062 RJ11 6C Solid/Stranded $0.2210-23062-BP Bulk Pack (100) $19.00

CAT6 550 MHz Solid CMR or CMP Rated • Rated • 23 AWG / 4 PairPVC 1000’ PULL BOX PLENUM 1000’ PULL BOX30-60013-Black 30-60014-Black30-60013-Blue 30-60014-Blue30-60013-Gray 30-60014-Gray30-60013-Green 30-60014-Green30-60013-Orange 30-60014-Orange30-60013-Red 30-60014-White30-60013-White ·30-60013-Yellow ·

DEALER PRICE DEALER PRICE $132.00 $300.00

CAT5E 350 MHz Solid CMR or CMP Rated • 24 AWG / 4 Pair

PART # DESCRIPTION DEALER PRICE 40-40071 Stripper/Cutter $6.00

MilesTek Universal Crimper

PART # DESCRIPTION DEALER PRICE40-12161 Frame w/ RJ45* $29.3940-12061 RJ45 Die Set* $12.9340-12162 Frame w/ RJ11* $28.5340-12062 RJ11 Die Set* $12.93

For complete specifications on our category cables,visit www.milestek.com

NOTE: Due to continuing fluctua-tion in the cost of copper, our cate-gory UTP bulk cable pricing issubject to change without notice.

UTP Cable Stripper/Cutter

Cross Connect Wire

Flat Satin Plugs

Flat Silver Satin Cable

PART # DESCRIPTION30-04024-1K Blue/White PairDEALER PRICE $45.00

PART # DESCRIPTION DEALER PRICE 30-04001-1K 4-Conductor $35.7230-04002-1K 6-Conductor $42.34

PART # DESCRIPTION DEALER PRICE 10-23051 RJ11, 4-Conductor $0.0810-23052 RJ12, 6-Conductor $0.1010-23050 RJ22, Handset $0.15

1,000 FT. ROLLS1,000 FT. ROLLS

COMMUNICATION CABLE

RJ45 Plug Boots

PART # COLOR10-99033 White10-99034 Ivory10-99035 Gray10-99036 Black10-99046 Red10-99047 Yellow10-99048 Blue10-99049 Green10-99050 OrangeDEALER PRICE $0.10

* Not compatiblewith AMP plugs

Page 6: Milestek 2013 Winter/Spring Dealer Catalog

NETWORKING Tools, Modular Adapters/Couplers

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T4

Network Installer Kit• EZ-RJ45® Crimp Tool• 100 EZ-RJ45® CAT5E Connectors• Round Cable Cutter • 12 Tray Tote Bag• Universal Stripper/Cutter• Replacement Blades • Pro Punchdown Tool Handle• Pro Punchdown Tool 110 Bit & 66 Bit

PART # DESCRIPTION DEALER PRICE40-50288 Network Installer Kit $189.95

Uni-Network Tester

PART # DESCRIPTION DEALER PRICE40-30089 Uni-Network Tester $58.29

This compact tester withremote tests continuity ofindividual wires in eitherautomatic or manualmode. Accepts both RJ45and RJ11 plugs. IncludesBNC Adapter cables, case and 9V Battery.

A B C D

Modular Adapters/Couplers

KEY PART# DESCRIPTION DEALER PRICEA 10-23952 CAT5e RJ45 Coupler $1.45B 10-23941 RJ11 4C Coupler $0.22C 10-23942 RJ11 6C Coupler $0.82D 10-23946 CAT5e Insert Coupler $2.27

10-23948 CAT6 Insert Coupler $3.64

The one-piece EZ-RJ45® connector simplifies twisted pair terminationsby allowing the wires to be inserted through the connector and outthe front for verifying the proper wiring order. Reducing the distancebetween the wire twists and contacts, electrical performance of thetermination is optimized by pulling the connector down over thecable jacket and seating it tightly in the rear of the connector. Thecrimp tool crimps and trims in one cycle.

EZ-RJ45® Plugs & Tools

Strip & prepare cable,slide conductors straightthrough EZ connector

Verify proper wiring order

Crimp connector & trimexcess wire in one step withthe EZ-RJ45 ® Crimp Tool!

3 EZ Steps to Perfect Terminations2

3

1

PART # DESCRIPTION DEALER PRICE10-23087 CAT5E EZ-RJ45® Plugs, 50 Pack $25.2010-23087-100 CAT5E EZ-RJ45® Plugs, 100 Pack $49.5610-23089 EZ-RJ11® Plugs, 50 Pack $14.2810-23089-100 EZ-RJ11® Plugs, 100 Pack $27.9610-23090 Shielded CAT5E RJ45® Plugs, 50 Pack $62.0010-23090-100 Shielded CAT5E EZ-RJ45® Plugs, 50 Pack $120.0010-23088 CAT6 EZ-RJ45® Plugs, 50 Pack $28.4810-23088-100 CAT6 EZ-RJ45® Plugs, 100 Pack $55.9610-99073 CAT6 Boot Blue 50 Pack $7.0410-99074 CAT6 Boot Gray 50 Pack $7.0410-99075 CAT6 Boot Green 50 Pack $7.0410-99076 CAT6 Boot Yellow 50 Pack $7.0410-99077 CAT6 Boot Black 50 Pack $7.0440-40371 Crimp Tool $49.6040-40630 Pro Crimp Tool $69.56

40-40371 40-40630

MilesTek Pro Punchdown Tool• Integrated bit storage in handle• Adjustable tension setting• Ergonomic handle with cushioned grip

B

KEY PART# DESCRIPTION DEALER PRICEA 40-40303 Punchdown Tool $16.29B 40-40304 110 Bit $5.36C 40-40305 66 Bit $5.36

A C

Page 7: Milestek 2013 Winter/Spring Dealer Catalog

NETWORKING

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

For Expert Customer Service,Call Our Sales Team Today!

Milestek Jacks

5

MILESTEK SNAP IN JACKS

RJ11 Jacks

CAT5E Jacks

CAT6 Jacks

The keystone jacks are individually terminated using 110 termination method for quick installation. User instructions andbasic wiring layouts for standard configuration are included.

PART # COLOR60-06524 Ivory60-10524 White60-16524 Red60-19524 Blue60-18524 Yellow

PART # COLOR60-25524 Off. White60-15524 Black60-17524 Green60-08524 Orange60-07524 Light Almond

PART # COLOR60-06190 Ivory60-10190 White60-16190 Red60-19190 Blue60-18190 Yellow

PART # COLOR60-25136 Off. White60-15136 Black60-17190 Green60-08190 Orange60-07190 Light Almond

PART # COLOR60-06624 Ivory60-10624 White60-16624 Red60-19624 Blue60-18624 Yellow

PART # COLOR60-25624 Off. White60-15624 Black60-17624 Green60-08624 Orange

RCA to F-TypeFeedthroughs

PART # DESCRIPTION COLOR60-06219 Red RCA to F Ivory60-10219 Red RCA to F White60-25219 Red RCA to F Off. White60-06227 Yellow RCA to F Ivory60-10227 Yellow RCA to F White60-25227 Yellow RCA to F Off. White60-06228 Black RCA to F Ivory60-10228 Black RCA to F White60-25228 Black RCA to F Off. White

RCA to RCA Feedthroughs

PART # JACK MODULE60-06226 White Ivory60-10226 White White60-25226 White Off. White60-06221 Red Ivory60-10221 Red White60-25221 Red Off. White

PART # JACK MODULE60-06220 Yellow Ivory60-10220 Yellow White60-25220 Yellow Off. White60-06222 Black Ivory60-10222 Black White60-25222 Black Off. White60-06299 Blue Ivory60-10299 Blue White60-25299 Blue Off. White60-06277 Green Ivory60-10277 Green White60-25277 Green Off. White

DEALER PRICE $2.40

DEALER PRICE $1.75

DEALER PRICE $2.50

DEALER PRICE $1.33

DEALER PRICE $2.64

AV SNAP IN JACKS

PART # DESCRIPTION DEALER PRICE60-40001 3.5mm Snap In Jack $2.5060-40002 White USB/A F/F Mini Snap In Jack $2.0860-40003 White USB/B F/F Mini Snap In Jack $2.0860-40004 White HDMI F/F Snap In Jack $4.1760-40005 Ivory HDMI F/F Snap In Jack $4.1760-10152 BNC Insert - White $2.9460-25197 BNC Insert - Office White $2.9460-06197 BNC Insert - Ivory $2.9460-15197 BNC Insert - Black $2.94

SOLD IN PAIRS. Each pair includes one module with a red stripeand one with a black stripe.

Binding Post Modules

PART # COLOR60-06191 Ivory60-10191 White60-25191 Off. WhiteDEALER PRICE $0.71

PART # COLOR60-06192 Ivory60-10192 White60-25192 Off. WhiteDEALER PRICE $1.35

F-Type JacksPART # DESCRIPTION COLOR DEALER PRICE60-06137 Binding Post White $4.8460-06152 Binding Post Ivory $4.8460-06138 Binding Post Off, White $4.84

Blank Fillers

3.5 mm USB/A USB/B

HDMI BNC

Sold in10 Pack

Jack Terminator Tool Kit

PART # DESCRIPTION DEALER PRICE

40-50400Jack Termination with Punchdown Head-SetFor MilesTek CAT5E Jacks Only (not CAT6)and HT Jacks (RJ45FC5E, RJ45FC6)

$74.14

For MilesTek and HellermannTyton CAT5E/CAT6 JacksThis new patented product allows professionals to significantly reduce the timeit takes to terminate CAT5E communication cables into standard wall jacks. Inone simple action, 4 pairs of wires areterminated and the built-in blades cut offthe excess wire, eliminating the need fora secondary trim step.• High-grade, hardened steel frame offers superior performance and durability

• Ratcheted action to ensure proper, consistent termination

• Removable jack cradle allows for alternate lacing option

• Lifetime Warranty (crimper frame only).

Page 8: Milestek 2013 Winter/Spring Dealer Catalog

NETWORKING Wall Plates, Surface Mount Boxes

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T6

PART # DESCRIPTION DEALER PRICEDC-45-0001-BR 1 Gang Recessed Cable Plate Brown $1.95DC-45-0001-LA 1 Gang Recessed Cable Plate Almond $1.95DC-45-0001-WH 1 Gang Recessed Cable Plate White $1.95DC-45-0001-BK 1 Gang Recessed Cable Plate Black $1.95DC-45-0002-BR 2 Gang Recessed Cable Plate Brown $2.60DC-45-0002-LA 2 Gang Recessed Cable Plate Almond $2.60DC-45-0002-WH 2 Gang Recessed Cable Plate White $2.60DC-45-0003-WH 3 Gang Recessed Cable Plate Almond $4.70DC-45-0003-BK 3 Gang Recessed Cable Plate Black $4.70

RECESSED CABLE PLATE

Use these new recessed low voltage cable plates toinstall low voltage cables behind your flat panel TV,your amplifier or other audio and video devices.These recessed low voltage cable plates are designedfor use with Low Voltage / Data cables only.

PART # DESCRIPTION DEALER PRICE60-01003 1-Gang Plastic Mounting Bracket - MP1P $1.0860-01006 1-Gang Metal Mounting Bracket - MP1S $1.44

MILESTEK WALL PLATES

Flush-Mount Wall Plates

Dual Gang Plate

Single Gang Plate

These wall plates are ideal for the installation of keystone jacks,"F" TV connectors or ST, SC fiber optic connectors, available in1, 2, 3, 4 and 6-port or blank.

PART # DESCRIPTION60-06501 1-Port Ivory60-10501 1-Port White60-25501 1-Port Off. White60-07501 1-Port Lt. Almond60-06502 2-Port Ivory60-10502 2-Port White60-25502 2-Port Off. White60-07502 2-Port Lt. Almond60-06503 3-Port Ivory60-10503 3-Port White60-25503 3-Port Off. White60-07503 3-Port Lt. Almond60-06504 4-Port Ivory60-10504 4-Port White60-25504 4-Port Off. White60-07504 4-Port Lt. Almond60-06506 6-Port Ivory 60-10506 6-Port White60-25506 6-Port Off. White60-07506 6-Port Lt. AlmondDEALER PRICE $0.58

PART # DESCRIPTION60-06144 6-Port Ivory60-10144 6-Port White60-20444 6-Port Off. White60-06145 12-Port Ivory60-10145 12-Port White60-20105 12-Port Off. White60-07512 12-Port Lt. AlmondDEALER PRICE $2.50

Stainless Multi-Access FaceplatesSingle Gang Plate

Dual Gang Plate

PART # DESCRIPTION60-03033 1-Port 60-03034 2-Port 60-03035 4-Port 60-03036 6-Port

DEALER PRICE $1.67

PART # DESCRIPTION60-03037 4-Port 60-03038 6-Port60-03039 12-PortDEALER PRICE $2.75

Category 5e surface-mount jacks are the printed circuit-type, to meet 100 MHz requirements. A tie wrap at-tached to the circuit board provides cable strain relief. The lids are held by a screw for secure mounting. Wallplates have a double-sided, adhesive pad for mounting-they may also be screw-mounted. The single CAT5e sur-face-mount jack is compact, measuring 25/8”w x 13/4”d x13/8”h. The duplex model measures 25/8”w x 25/8”d x13/8”h. Ivory.

CAT5E Surface-Mount Jacks

PART # DESCRIPTION DEALER PRICE60-06193 CAT5e Single Surface-Mount $2.4060-06194 CAT5e Duplex Surface-Mount $5.00

Surface Mount BoxesSurface mount boxes feature a compact low profile outline.They are ideal where internal wall access is not available.Boxes have knockouts on three sides tomate with HellermannTyton’s raceway.

Easy to install and can be fastened to virtually any surface.

PART # DESCRIPTION60-05211 2-Port Ivory60-05212 2-Port White60-05213 2-Port Office White

DEALER PRICE $1.79

Compatible with Milestek Jacks

PART # DESCRIPTION60-05208 6-Port Ivory60-05209 6-Port White60- 05210 6-Port Office White

DEALER PRICE $5.50

PART # DESCRIPTION60-05214 4-Port Ivory60-05215 4-Port White60-05216 4-Port Office White

DEALER PRICE $2.95

MountingBrackets

Page 9: Milestek 2013 Winter/Spring Dealer Catalog

NETWORKING

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

For Expert Customer Service,Call Our Sales Team Today!

CAT5E/CAT6 Patch Cords, Panels

7

CAT6 Patch Cords - featuring a snagless strain relief.

CAT5E 350 MHz Stranded EZ-Latch Snag Free Patch Cords

Replace the xxx with the needed length in inches Example: 26-250-36 = 3 ft.

Gray 26-250-xxxBlue 26-251-xxxWhite 26-252-xxxRed 26-253-xxx

Black 26-254-xxxGreen 26-255-xxxYellow 26-256-xxxOrange 26-257-xxx

LENGTH (FT) 1’ 3’ 5’ 7’ 10’ 14’ 25’xxx Part # 12 36 60 84 120 168 300DEALER PRICE $0.64 $0.87 $1.09 $1.37 $1.82 $2.27 $3.91

Gray 26-260-xxxBlue 26-261-xxxWhite 26-262-xxxRed 26-263-xxx

Black 26-264-xxxGreen 26-265-xxxYellow 26-266-xxxOrange 26-267-xxx

LENGTH (FT) 1’ 3’ 5’ 7’ 10’ 14’ 25’xxx Part # 12 36 60 84 120 168 300DEALER PRICE $0.82 $1.19 $1.55 $1.91 $2.64 $3.55 $5.45Replace the xxx with the needed length in inches Example: 26 260 36 = 3 ft.

CAT5E 350 MHz Stranded Conductor Non-Booted Patch Cords

Replace the xxx with the needed length in inches Example: 26-200-36 = 3 ft.

Gray 26-200-xxxBlue 26-201-xxxWhite 26-202-xxxRed 26-203-xxx

Black 26-204-xxxGreen 26-205-xxxYellow 26-206-xxxOrange 26-207-xxx

LENGTH (FT) 1’ 3’ 5’ 7’ 10’ 14’ 25’xxx Part # 12 36 60 84 120 168 300DEALER PRICE $0.64 $0.87 $1.09 $1.37 $1.82 $2.27 $3.91

MILESTEK PATCH CORDSPerfect for distributing data, voice and video, our patch cablesensure you always have the necessary throughput to bandwidth-intensive applications. Our CAT5E patch cords are tested to 350 MHz for high-speed applications. CAT6 patch cords are designed to pass 10/100/1000 Mbp traffic through a Gigabitnetwork without latency from the physical layer. Booted toprevent unwanted network failures or cable snag during usage,and molded to help with strain relief.

Type-66 punchdown block is suitable forCAT5e and voice applications. The 89Dmounting block holds the 66 block, allowingwires to be routed behind it.

Type-66 Connecting Block

PART # DESCRIPTION DEALER PRICE50-44017 66 Punchdown Block w/cover $8.1650-44018 Bridging Clips Bag of 25 $1.7950-44014 89D Mounting Block $1.36

PART # PORTS DEALER PRICE50-44026 12 $40.9150-44027 24 $80.91

CAT5E Front Access Patch Panels• All connections from front panel• Front covers hide 110 terminations• 24 port model surface or rack mountable

CAT6 Patch Panels

PART # PORTS DEALER PRICE50-44083 12 $40.0050-44081 24 $45.4550-44082 48 $87.27

CAT5E Patch PanelsRJ45 Cat5E patch panels have 110 punchdown connectors.

PART # PORTS DEALER PRICE50-44052 12, Vertical $35.0050-44066 24 $34.5550-44067 48 $63.6450-44068 96 $163.64

MILESTEK PATCH PANELSOur pre-configured RJ45 Cat5E and CAT6 patch panels are suitablefor level connecting or terminal connecting. CAT5E panels are

available with 24, 48 or 96 ports. CAT6 panels are available with12, 24 or 48 ports.

• 19-inch rack-mountable• Multi-port modular jacks, compact size 50 microns gold-plated pin contacts

• Accept 22-26 AWG solid with insulation diameter of 0.4 - 0.64mm • Used for any standard 483mm rack • Plug insertion life 750cycles min • Each patch panel is compatible with T568A and T568B wiring schemes• CAT6 panels are fully compatible with Gigabit Ethernet• Can easily be terminated with single pair or multi-pair impact tool

See page 69 for Hinged Panel Mounts

Vertical 50-pair 110 wiring block kit has 4 & 5-pair clips, ID holder, label, and bracket. Horizontal 100 & 300-pair110 wiring block kits have wiring blocks with legs, 4 & 5-pair clips and two ID holders with labels.

110 Wiring Block Kit

PART # DESCRIPTION DEALER PRICE50-44029 Horizontal 100-Pair $19.63

MILESTEK WIRING BLOCKS

PART # PORTS DEALER PRICE50-44080 12, Vertical $50.00

Page 10: Milestek 2013 Winter/Spring Dealer Catalog

NETWORKING Leviton Jacks, Wall Plates, Panels

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T8

RJ11 6C Modules

Leviton QuickPort Snap-In Modules for Voice & Data

PART NO. COLORLE-5G108-RI5 IvoryLE-5G108-RW5 WhiteLE-5G108-RG5 GrayLE-5G108-RE5 BlackLE-5G108-RO5 OrangeLE-5G108-RL5 BlueLE-5G108-RR5 Dark RedLE-5G108-RY5 YellowLE-5G108-RB5 BrownLE-5G108-RT5 Lt. AlmondLE-5G108-RV5 GreenLE-5G108-RP5 PurpleLE-5G108-RC5 Crimson Red

DEALER PRICE $3.36

PART NO. COLORLE-41106-RI6 IvoryLE-41106-RW6 WhiteLE-41106-RG6 GrayLE-41106-RE6 BlackLE-41106-RO6 OrangeLE-41106-RL6 BlueLE-41106-RR6 Dark RedLE-41106-RY6 YellowLE-41106-RB6 BrownLE-41106-RT6 Lt. AlmondLE-41106-RG6 GreenLE-41106-RP6 PurpleLE-41106-RC6 Crimson RedDEALER PRICE $2.08

CAT6+ eXtremeRJ45 JacksThese 8-position, 8-conductor Connectorsfeature dual-color-coded wiring labels withboth T568A and T568B wiring patterns,QuickPort compatibility, and a 110-stylerear termination field for easy terminationof a jack while installed in a wallplate orfield-configurable panel.

PART # COLORLE-61110-RI6 Ivory

LE-61110-RW6 White

LE-61110-RT6 Lt. Almond

LE-61110-RL6 Blue

LE-61110-RR6 Dk Red

LE-61110-RO6 Orange

LE-61110-RY6 Yellow

LE-61110-RV6 Green

LE-61110-RE6 Black

DEALER PRICE $6.06

CAT6+ eXtreme Patch Panels

CAT5E Patch Panels

• The panels shallfeature both T568Aand T568B wiring configurations,white IDC 110-punchdown mod-ules, mountingstandoffs for cable management bars, color-coded front windowlabeling, and a termination standoff for patch panelearthing/grounding.• The panels have universal T568A and T568B wiring cards for terminations.• The panels are made of 16 gauge steel, and have a black paintedfinish with white silk-screening.• The plastic elements are fire-retardant with a UL flammabilityrating of 94V-0.• The 110 termination on the rear of the panel follows normal installation color sequence (blue, orange, green, brown) from left to right.

FEATURES:PART # DESCRIPTION DEALER PRICE LE-5G596-U89 12 Port Vertical Mount $70.28LE-5G596-U12 12 Port Rackmount $81.84LE-5G596-U24 24 Port Rackmount $109.65LE-5G596-U48 48 Port Rackmount $219.26LE-5G596-U96 96 Port Rackmount $414.01

Set the bar higher for mechanical and electrical excellence withLeviton’s new, craft-friendly, 110-style eXtreme 6+ Universal PatchPanels. These panels feature T568A and T568B wiring compatibility,white IDC 110-punchdown modules, and top-of-the-line, error-freeCategory 6 performance. Optimized for maximum throughput and azero bit error rate, thesepanels also featureLeviton’s unique "Retention ForceTechnology" for increased connectionintegrity and consistently robustperformance over the life of the system.

CAT5e Gigamax Jacks

PART # DESCRIPTION DEALER PRICE LE-69586-U89 12 Port Vertical Mount $98.03LE-69586-U12 12 Port Rackmount $105.10LE-69586-U24 24 Port Rackmount $160.90LE-69586-U48 48 Port Rackmount $316.98LE-69586-U96 96 Port Rackmount $583.39

Jack Terminator Tool Kit

PART # DESCRIPTION DEALER PRICE

40-50401Jack Terminator with Punchdown Head-Set For LevitonCAT5E Jacks (41106, 41108, 5G108)

$74.14

40-50402Punchdown Head Set for Leviton CAT6 Jacks(61110, 5G110, 6110G)

$31.30

For Leviton CAT5E/CAT6 JacksThis new patented product allows professionals to significantly re-duce the time it takes to terminate CAT5E and CAT6 communica-tion cables into standard wall jacks. In one simple action, 4 pairs ofwires are terminated and the built-in blades cut off the excess wire,eliminating the need for a secondary trim step.• High-grade, hardened steel frame offers superior performance and durability

• Ratcheted action to ensure proper, consistent termination

• Adjustment feature for extra leverage applications

• Quick-change punch sets require no tools

• Removable jack cradle allows for alternate lacing option

• Rubber-embedded handles provide extra comfort.

• Lifetime Warranty (crimper frame only).

Page 11: Milestek 2013 Winter/Spring Dealer Catalog

NETWORKING

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

For Expert Customer Service,Call Our Sales Team Today! 9

Leviton Wall Plates, Surface Mount

Single-gang flush mount wallplates offer field-configurableflexibility in an attractive single-piece housing. A choice of 1-,2-, 3-, 4- or 6-ports allows for a variety of configurations and fu-ture expansion if needed. The wallplates are fully compatiblewith all QuickPort Snap-in Modules including connectors orblank fillers.

Leviton QuickPort® Single-Gang Multi-Port Wall Plates

PART # PORTS COLORLE-41080-6IP 6 Port IvoryLE-41080-6WP 6 Port WhiteLE-41080-6TP 6 Port Lt. AlmondLE-41080-4IP 4 Port IvoryLE-41080-4WP 4 Port WhiteLE-41080-4TP 4 Port Lt. AlmondLE-41080-3IP 3 Port IvoryLE-41080-3WP 3 Port White

PART # PORTS COLORLE-41080-3TP 3 Port Lt. AlmondLE-41080-2IP 2 Port IvoryLE-41080-2WP 2 Port WhiteLE-41080-2TP 2 Port Lt. AlmondLE-41080-1IP 1 Port IvoryLE-41080-1WP 1 Port WhiteLE-41080-1TP 1 Port Lt. Almond

DEALER PRICE $1.25

Compact, highly versatile surface mount housings designedespecially for Leviton’s QuickPort® Keystone Jacks, to providenetwork installers with an economical yet reliable enclosure formultiple voice/data connections.Modular design allows the user to create a unique networkingand/or voice solution by loading the housing with CAT 5e,CAT6, video and voice grade jacks. These housings are unloaded,connectors sold separately.

Leviton Surface Mount Housing

• Snap-on locking cover offers convenientaccessibility for quick and easykeystone installation, additions,or upkeep• Screws and mounting adhesiveincluded for permanent desktop orwall mount installation• UL 94 V-0 fire rated• NEC Article 800 compliant• CSA certified• UL listed• Additional port and colorstyles available

PART # DESCRIPTION DEALER PRICE LE-41089-2IP Leviton 2-port Surface Mount Housing, Ivory $1.61LE-41089-2WP Leviton 2-port Surface Mount Housing, White $1.61LE-41089-4WP Leviton 4-port Surface Mount Housing, White $3.03

Single Gang Wallplates Dual Gang WallplatesPART NO. COLORLE-80401-I IvoryLE-80401-E BlackLE-80401-GY GrayLE-80401-W WhiteLE-80401-T Lt. AlmondDEALER PRICE $0.72

PART NO. COLORLE-80409-I IvoryLE-80409-E BlackLE-80409-GY GrayLE-80409-W WhiteLE-80409-T Lt. AlmondDEALER PRICE $1.84

Decora®

Wallplates

Combine voice, data, audio and video in one compact, attractiveDecora wallplate. Decora Wallplate Inserts offer designer style to match Leviton Decora electrical switches andoutlets, with the capacity and flexibility to support high-techcommunications for boardrooms or workstations.

QuickPort® Decora® Multimedia Inserts

PART # DESCRIPTIONLE-41642-00I 2 Port IvoryLE-41642-00W 2 Port WhiteLE-41642-0GY 2 Port GrayLE-41642-00B 2 Port BrownLE-41642-00T 2 Port Lt. AlmondLE-41642-00E 2 Port BlackLE-41643-00I 3 Port IvoryLE-41643-00W 3 Port WhiteLE-41643-0GY 3 Port GrayLE-41643-00E 3 Port BlackLE-41643-00T 3 Port Lt. AlmondLE-41643-00B 3 Port Brown

DEALER PRICE $3.05

PART # DESCRIPTIONLE-41644-00I 4 Port IvoryLE-41644-00W 4 Port WhiteLE-41644-0GY 4 Port GrayLE-41644-00E 4 Port BlackLE-41644-00T 4 Port Lt. AlmondLE-41644-00B 4 Port BrownLE-41646-00I 6 Port IvoryLE-41646-00W 6 Port WhiteLE-41646-0GY 6 Port GrayLE-41646-00E 6 Port BlackLE-41646-00T 6 Port Lt. AlmondLE-41646-00B 6 Port Brown

Page 12: Milestek 2013 Winter/Spring Dealer Catalog

NETWORKING Leviton Structured Media

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T10

• Use CAT5e patchcords to link tomedia distributionmodules and datahubs. Use phonecords to link totelephone distribution modules.

• Use high-speed unshielded, twisted-pair cable to routedata, phone, fax or modem signals.

• Printed circuit board with six CAT5e ports.• Dimensions: 2.24"h x 6.57"w x 1.96"d.

CAT5E Voice and Data Module

1x9 Bridged Telephone Module• Operates up to 9separate telephoneswith 4 separatetelco lines.

• Printed circuitboard with 10bridged 4-pair 110 type insulation displacement connectors.

• Suitable for phone, fax or modem.• Dimensions: 2.24"h x 6.57"w x 1.82"d.

• Splits video signals. Outputsfor up to 6 or 8 televisions.

• Provide digital cable, cable TVand other video services, via coaxial cable, to any room in the house.• Die-cast housing and printed circuit board.• Use with the Video Amplifier for increased signal strength.• Units come with mounting bracket.• Gold-flashed contacts on 2.05 GHz units provide lowest conductive resistance.

PART NUMBER DESCRIPTION DEALER PRICE LE-47690-6C2 1x6 Passive Video Splitter Module (2.05 GHz) $25.55LE-47690-8C2 1x8 Passive Video Splitter Module (2.05 GHz) $29.24

1x6, 1x8 Coaxial

Cable Distribution

Modules

LEVITON STRUCTURED MEDIA MODULESLEVITON STRUCTURED MEDIA CENTERS

• Accommodates up to twofull-width Pre-ConfiguredStructured Cabling Panels–delivering audio/video, voiceand data to any room of the home or office.

• Positive “stops” on housing sidewalls prevent the enclosurefrom falling through studs during installation.

• One piece white steel unit holds full and half-widthexpansion modules.

• Can be surface mounted or recessed. Ideal for newinstallations or retrofits.

• Purchase empty or in kits with Pre-Configured StructuredCabling Panels, for easy, one-step home technology solutions.

• Mounting guides on the cover align screw-holes and reducethe chances of dropping during attachment.

• Powder-coated white cover features a ¾" overlap to hideirregular drywall cuts.

• Combine two or more enclosures for larger installations orfuture expansion.

• Multiple knock-outs on top & bottom facilitate cable entry & routing.

Series 140 StructuredMedia Center

PART NUMBER DESCRIPTION DEALER PRICE LE-47605-14W SMC-140 14' Enclosure & Cover

Size: 14.38"H x 14.38"w x 3.60"d$30.06

• Multiple knock-outs on top, bottom,sides and back facilitate cable entry androuting from every desired room.

• Sturdy, one-piece white steel construction.• Combine two or more enclosures for larger installations orfuture expansions.

• Holds ¼, ½ and full-width expansion modules with theability to mount most modules vertically or horizontally.

• Large capacity provides multiple functionality for |“wired” homes.

• Powder -coated white cover features a ¾" overlap to hideirregular drywall cuts.

• Mounting hooks on the cover align screw-holes and reducethe chances of dropping during attachment.

• Holds a broad range of current and future distributionmodules, delivering audio, video, voice, data, security andmore to any room of the home or office.

• Can be surface mounted or recessed. Ideal for newinstallations or retrofits.

Series 280 StructuredMedia Centers

PART NUMBER DESCRIPTION DEALER PRICE LE-47605-28W SMC-280 28" Enclosure & Cover

Size: 28"H x 14.38"w x 3.60"d$62.73 PART NUMBER DESCRIPTION DEALER PRICE

LE-47605-C5B CAT5E Voice and Data Module $33.88

PART NUMBER DESCRIPTION DEALER PRICE LE-47689-00B 1x9 Bridged Telephone Module $33.00

Page 13: Milestek 2013 Winter/Spring Dealer Catalog

The CAT5e patch panels are pre-configured in 12, 24, 48 and96 port versions to meet the needs of nearly all customerapplications. Offered with increments of 6 port modules thatcan be replaced if damaged during installation, the patch panelscan be used for both T568A andT568B wiring configurations.

CAT5e Patch Panels

PART # DESCRIPTION DEALER PRICE

50-44048 12 Port $79.79

50-44049 24 Port $95.75

50-44050 48 Port $176.18

50- 44051 96 Port $366.34

The MegaBand Category 5e flush modular jack was designed tomeet the needs of end-users and installers. Several features havebeen incorporated to provide an easier and quicker installation.This system is guaranteed to have exceptional performance.

CAT5E Flush Jacks

PART # COLOR60-06424 Ivory60-10424 White60-11424 Gray60-15424 Black

PART # COLOR60-08424 Orange60-24424 Brown60-25424 Office White60-26424 Violet

PART # COLOR60-16424 Red60-17424 Green60-18424 Yellow60-19424 Blue

PART # DESCRIPTION60-20440 3-Port Office White60-06142 4-Port Ivory60-10142 4-Port White60-20442 4-Port Office White60-06143 6-Port Ivory60-10143 6-Port White60-20443 6-Port Office White

DEALER PRICE $0.99

Flush-Mount Faceplates

PART # DESCRIPTION60-06139 1-Port Ivory 60-10139 1-Port White60-20436 1-Port Office White60-06140 2-Port Ivory60-10140 2-Port White60-20438 2-Port Office White60-06141 3-Port Ivory60-10141 3-Port White

CAT6 Patch Panels

Pre-configured in 12, 24 and 48port versions to meet the needsof nearly all applications.The panels are offered withincrements of 6 port modulesthat can be replaced if damaged during installation. They canbe used for both T568A and T568B wiring configurations.

PART # DESCRIPTION DEALER PRICE 50-44038 12 Port $101.4850-44039 24 Port $148.8350-44040 48 Port $295.98

PART # COLOR60-06324 Ivory60-10324 White60-11324 Gray60-15324 Black

PART # COLOR60-08324 Orange60-24324 Brown60-25324 Office White60-26324 Violet

PART # COLOR60-16324 Red60-17324 Green60-18324 Yellow60-19324 Blue

CAT6 Flush JacksThe GigaBand CAT6 flush modular jack was designed to “futureproof” installations. Its patented design uses innovative crosstalkcancellation technology.The GigaBand system willeasily support emergingapplications such as GigabitEthernet and 622 Mbps ATM.

DEALER PRICE $3.29 DEALER PRICE $5.60

NETWORKING

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

For Expert Customer Service,Call Our Sales Team Today! 11

HellermannTyton Jacks, Wall Plates, Panels

Snap-in 19” modular multimedia distribution panels are made ofblack high-grade anodized aluminum. Unique locking feature isprovided by an integrated plastic bezel within the aluminum panelthat locks modules andcouplers securely inplace, flush with thefront of the panel.Panels have numberedholes (ref. 0.57”w x0.78”h) and all panels have rollededges for rigidity.

Snap-In Modular Multimedia Distribution Panels

PART# PANEL DESCRIPTION DEALER PRICE 50-23019 1-Row 12-Ports 1-RS $14.5350-23020 1-Row 16-Ports 1-RS $16.8250-23021 2-Rows 12-Ports 2-RS $19.0050-23022 2-Rows 16-Ports 2-RS $23.5750-23023 3-Rows 16-Ports 3-RS $24.4360-15146 Blank FIller Black $2.26

Page 14: Milestek 2013 Winter/Spring Dealer Catalog

Multi-Mode Fiber Optic Patch Cords

(Custom Lengths Available)

Part # 27-500-001

Part # 27-270-001

ST/ST DUPLEXPART # SIZE DEALER PRICE 27-200-001 1 M $8.2527-200-002 2 M $8.8327-200-003 3 M $9.4227-200-005 5 M $10.5027-200-010 10 M $13.33

ST/SC DUPLEX ST/LC DUPLEXPART # SIZE DEALER PRICE 27-500-001 1 M $8.4227-500-002 2 M $9.0027-500-003 3 M $9.2527-500-005 5 M $9.5827-500-010 10 M $13.42

PART # SIZE DEALER PRICE 27 260 001 1 M $10.7527 260 002 2 M $11.3327 260 003 3 M $11.9327 260 005 5 M $13.0027 260 010 10 M $17.50

SC/SC DUPLEXPART # SIZE DEALER PRICE 27-300-001 1 M $8.4727-300-002 2 M $9.3827-300-003 3 M $10.3227-300-005 5 M $12.1727-300-010 10 M $16.80

SC/LC DUPLEX LC/LC DUPLEXPART # SIZE DEALER PRICE 27-270-001 1 M $10.0827-270-002 2 M $11.0027-270-003 3 M $11.9327-270-005 5 M $13.7827-270-010 10 M $15.83

PART # SIZE DEALER PRICE 27-250-001 1 M $11.6727-250-002 2 M $12.6027-250-003 3 M $13.5227-250-005 5 M $15.3727-250-010 10 M $20.00

FIBER OPTIC PATCH CORDS

(Custom Lengths Available)

ST/ST DUPLEXPART # SIZE DEALER PRICE 27-210-001 1M $10.2027-210-002 2M $10.6727-210-003 3M $11.1527-210-005 5M $12.08

ST/SC DUPLEX SC/SC DUPLEXPART # SIZE DEALER PRICE 27-510-001 1M $9.6027-510-002 2M $10.2827-510-003 3M $10.9827-510-005 5M $12.00

PART # SIZE DEALER PRICE 27-310-001 1M $10.4527-310-002 2M $10.9227-310-003 3M $11.3327-310-005 5M $12.25

Single Mode Fiber Optic Patch Cords

LC/LC DUPLEXPART # SIZE DEALER PRICE 27-255-001 1M $13.0027-255-002 2M $13.3027-255-003 3M $14.0027-255-005 5M $15.37

LC/ST DUPLEXPART # SIZE DEALER PRICE 27-265-001 1M $13.4227-265-002 2M $13.8327-265-003 3M $14.3327-265-005 5M $15.25

Rackmountable Fiber Enclosures• Sliding tray for easy access to the fiber • Integrated cable management• Enclosures come unloaded, customize with fiber adapter modules at right.

Plug-In Fiber Adapter Modules

PART # DESCRIPTION DEALER PRICE 50-24044 18/24 Fiber Enclosure 1U Unloaded $151.6950-24045 36/48 Fiber Enclosure 2U Unloaded $168.2450-24046 54/72 Fiber Enclosure 3U Unloaded $208.9350-24047 72/96/144 Fiber Enclosure 4U Unloaded $255.84

PART # DESCRIPTION DEALER PRICE 50-24017 6 ST MM/SM $23.9650-24018 6 Simplex SC MM/SM $31.1550-24019 3 Duplex SC MM/SM $36.0150-24020 6 Duplex SC MM/SM $59.7750-24021 6 Duplex LC MM/SM $46.4750-24022 8 Simplex SC MM/SM $42.1150-24023 8 Simplex ST MM/SM $33.38

Wall Mount Fiber Enclosures

• Fully enclosed and lockable wall mount enclosures• Designed to support up to 4 modular adapter panels• Equipped with cable management and cablerouting accessories to limit bend radius and addstrain relief control.• The 12-port enclosure includes a rugged plasticlatch to secure the door• The 24-port enclosure has a door lock for theprovider side and a rugged plastic latch for theuser door side.

PART #. DESCRIPTION DEALER PRICE 50-24024 12/16 Wall Mount Enclosure $59.1950-24025 24/32 Wall Mount Enclosure $84.04

FIBER ENCLOSURES & ADAPTER MODULES

NETWORKING Fiber Optic Solutions

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T12

HDMI Over Fiber

See Page 26

Page 15: Milestek 2013 Winter/Spring Dealer Catalog

10/100 Desktop Ethernet Switches

PART # PORTS DEALER PRICE 90-30320 5 $24.5490-30321 8 $25.4290-30322 16 $47.02

10/100/1000 Gigabit Ethernet Switches

PART # PORTS TYPE DEALER PRICE 90-30144 5 Desktop $31.9790-30474 8 Desktop $65.9890-30148 16 Rackmount $130.3490-30145 24 Rackmount $181.2290-30146 48 Rackmount $660.00

PART # PORTS DEALER PRICE 90-30323 16 $48.9190-30324 24 $62.0690-30458 48 $233.52

With advantages such as, easy to Install and use, compact-sizeddesign, and simple troubleshooting, theseFast Ethernet switchesprovides cost-consciousbusiness and homeusers with the foundation of an integrated system of small-office / home-officenetworking. Provides array LED indicators, the network status can be monitored at a glance.

• Metal Housing• Complies with IEEE 802.3 10BaseT and IEEE 802.3u 100Base-TX standards

• Automatic speed and duplex mode sensing• Auto MDI/MDI-X on each port• Up to 3.2G non-blocking switch fabric• Up to 1K MAC address table • High performance Store-and-Forward Architecture

• Complies with IEEE802.3 10Base-T, IEEE802.3u 100Base-TX standards

• High performance Store-and-Forward Architecture• Runt and CRC filtering• Flow control (Back Pressure) support in half-duplex mode• 1K MAC Address Table, automatically learning and aging• Auto-MDI/MDIX on each port

10/100 Rackmount Ethernet Switches

Providing 16 Gbps non-blocking switch fabric as well as 8K MACAddress table, these switches support 802.3x full duplex flow control and also offer wire-speed packet transfer performance without risk of packet loss. All RJ-45 copper interfaces support10/100/1000Mbps auto-negotiation for optimal speed detectionthrough RJ-45 Category 3, 4, 5 or above cables. MDI/MDI-X autodetection is provided for direct wire connection to any Ethernet devicewithout requiring crossover cables.

Fast Ethernet MM Converters

• Comply with IEEE802.3, IEEE802.3u 10/100Base-TX, 100Base-FX Standard

• Connectors: One RJ-45 (Auto-MDI/MDI-X for FT-80x series)Twisted Pair, EIA568

• Support distances up to 2 km• One Fiber-optic, 1310nm wavelength, connector-type• Duplex mode support: Full or half-duplex mode by Auto-Negotiation

• Can be installed in a mediaconverter chassis

PART # DESCRIPTION DEALER PRICE 90-30113 RJ45 to ST $61.8890-30114 RJ45 to SC $51.72

Gigabit Ethernet Converters

PART # PORTS DEALER PRICE 90-30124 1000Base-T to 1000Base-SX (SC, MM) $75.2390-30125 1000Base-T to 1000Base-LX (SC, SM) $119.48

• Complies with IEEE802.3z, 1000Base-SX / 1000Base-LX, IEEE802.3ab 1000Base-T

• 1000Base-SX interface for up to 500 meters (SC,MM)

• Compact in size, easy installation • 1000Base-LX interface for up to 10km (SC,SM)• Full-duplex supports for TP and fiber port

NETWORKING

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

For Expert Customer Service,Call Our Sales Team Today! 13

Network Switches/Media Converters

Rackmount

Desktop

Page 16: Milestek 2013 Winter/Spring Dealer Catalog

Part# 90-30641

Part# USB-6MF • Part# USB-10MF • Part# USB-12MF

KEY PART# DESCRIPTION DEALER PRICE A 35-101-12 USB 2.0 A-Male to B-Male Cable, 1 ft. $0.82A 35-101-36 USB 2.0 A-Male to B-Male Cable, 3 ft. $0.91A 35-101-72 USB 2.0 A-Male to B-Male Cable, 6 ft. $1.27A 35-101-120 USB 2.0 A-Male to B-Male Cable, 10 ft. $2.27A 35-101-180 USB 2.0 A-Male to B-Male Cable, 15 ft. $3.00B 35-100-72 USB 2.0 A-Male to A-Male Cable, 6 ft. $1.45B 35-100-120 USB 2.0 A-Male to A-Male Cable, 10 ft. $2.00B 35-100-180 USB 2.0 A-Male to A-Male Cable, 15 ft. $3.09C 35-108-192 A-A Ext. 2.0 Active Cable, 16' $16.36D 90-30641 USB/Serial Adapter A-DB9M $21.82E USB2-6MF USB 2.0 Extension non Active A/A MF 6 ft. White $1.18E USB2-10MF USB 2.0 Extension non Active A/A MF 10 ft. White $2.27E USB2-15MF USB 2.0 Extension non Active A/A MF 15 ft. White $2.64

Part# 35-101-72 • Part# 35-101-120 • Part# 35-101-180 Part# 35-100-72 • Part# 35-100-120 • Part# 35-100-180 Part# 35-108-192

USB Cables

A B C

D

E

USB 1.1 Over CAT5E/CAT6 SolutionsExtend your USB peripherals (i.e. computer keyboard, mouse or harddrive) up to 150 ft. away from the location of your computer usingone CAT5/5E/6 cable. The USB signal is sent between the Local andRemote units by buffering the signal through send and receive linedrivers, preserving data integrity. Active repeaters provide maximumflexibility for USB devices and are ideal for security and surveillancevideo, PC digital audio systems and other peripherals with USBinterface that are beyond the reach of regular cables

Features:• Wall Plate set includes both Local and Remote Plate • Extends USB signal using regular CAT5/5e/6 cable up to 150 ft. • Fully compliant with USB 1.1 specification • Supports any full-speed or low-speed USB devices • 100% compatible with USB hubs and other devices • No software driver, no power needed

PART # DESCRIPTION DEALER PRICE 90-12202 USB Over CAT5E/6Wall Plate $36.00

PART # DESCRIPTION DEALER PRICE 90-12201 USB UTP Hub Kit $52.00

USB 1.1 OverCAT5E/CAT6 Extender

USB 1.1 Over CAT5E/CAT6Wall Plate Set

PART # DESCRIPTION DEALER PRICE 90-12200 USB UTP Extender Kit $36.00

USB 1.1 Over CAT5E/CAT6 Extender/4-Port Hub

NETWORKING USB Solutions

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T14

Page 17: Milestek 2013 Winter/Spring Dealer Catalog

USB 2.0 Over CAT5E/CAT6 Solutions

PART # DESCRIPTION DEALER PRICE 90-12205 USB 2.0 Over CAT5E/CAT6 Advanced Extender Balun 4-Port Hub (Active) $373.28

USB 2.0 Over CAT5E/CAT6 Active Extender Sets

FEATURES:• Extends the transmission distance up to 100 meter/ 330 ft using oneCAT5E/CAT6 solid-gauge cable

• Fully compliant with USB 2.0 specification • Supports most full-speed or low-speed USB devices • Recommended 1 ft. USB cable for transmitter side is included• AC/DC 5V 2A power adapter included• Designed in Gigabit Ethernet Protocol, supports speed up to 480 Mbps USB 2.0Specifications

• Ideal for USB peripheral extension, industrial control, security, digital signage• Works with Windows XP, Vista, Windows 7, Windows Server 2003 & 2008• Not compatible with USB hubs, some touch screen monitors, and video streamingdevices such as webcams

• Software driver included

Transmitter

Receiver

KEY PART # DESCRIPTION DEALER PRICE A 90-12203 USB 2.0 Over CAT5E/CAT6 Extender Set $111.43B 90-12204 USB 2.0 Over CAT5E/CAT6 Extender Balun 4-Port Hub (Active) $159.29

USB 2.0 Over CAT5E/CAT6 Advanced Extender Balun 4 Port Hub (Active)

FEATURES:• Long reach USB 2.0 powered by ExtremeUSB® technology• Extends USB 2.0 high-speed and USB 1.1 (low-speed, full speed) devices up to 100m over Cat 5 cable • Operates with USB 2.0 high-speed host controllers and USB 1.1 classic hosts • Supports all USB device types: Control, Interrupt, Bulk and Isochronous at up to 480Mbps• True plug and play, ready to operate right out of the box. No new driver installation required • Supports all major operating systems including Windows®, Mac OS®, and Linux®• Integrated hub provides four remote USB 2.0 ports. Number of devices can be increased using additional USB hubs• AC power adapter at remote unit provides standard 500mA to each USB port• Power adapter at local unit is not required for normal operation• Ideal for a wide variety of USB devices, from printers, scanners, hard drives, and audio devices, to touch screens, web cams, and game controllers

Suggested USB 2.0 extender for video streaming applications such as Webcams, and for advanced TouchScreen Monitor applications. Represents the leading edge ofUSB 2.0 Extension solutions, providing world class 4 portUSB 2.0 connectivity over CAT 5 at data rates up to 480Mbps.

A

B

NETWORKING

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

For Expert Customer Service,Call Our Sales Team Today!

USB Solutions

15

Page 18: Milestek 2013 Winter/Spring Dealer Catalog

While being able to enjoy true HDTV in one location is nice, beingable to split, switch and extend that signal to multiple locations isbecoming a very popular and a convenient option to have. In addition,being able to provide quality solutions with the right connections,distance ability and performance is a must.

Whether you’re distributing HDMI signals throughout a home orVGA signals throughout a school or business, MilesTek has a fullrange of digital and analog devices to make your installationsuccessful. We offer devices for more budget conscious projectson up to higher-end products from a few leading AV partners.

This easy-to-follow section offers signal distribution options forHDMI, DVI, Component Video, RGB, VGA, Audio and USB.

Several devices utilizing CAT5E/CAT6 cabling to achieve greater distance, while keeping costs to a minimum, are also available.

Our complete line of AV products includes:• Cable Assemblies • Switchers• Distribution Amplifiers • Active and Passive Baluns• Over CAT5 Extenders • Wall Plates

COMPLETE LINE OF AV DISTRIBUTION SOLUTIONS

HDMI® High Speed with Ethernet Cables

DVI to HDMI Adapter Cables

HDMI Adapters

A B C

PART # LENGTH AWG DEALER PRICE32-270-12 1 FT 28 $3.4532-270-36 3 FT 28 $4.8232-270-72 6 FT 28 $6.4532-270-120 10 FT 28 $8.8732-270-180 15 FT 28 $11.4532-270-240 20 FT 28 $13.2732-270-300 25 FT 24 $24.9232-270-420 35 FT 24 $32.3132-270-600 50 FT 24 $50.7732-270-792 66 FT 24 $82.91

PART # LENGTH DEALER PRICE32-231-1M 1 M $5.8232-231-2M 2 M $10.4532-231-3M 3 M $12.2732-231-5M 5 M $19.0932-231-144 12 FT $15.0032-231-300 25 FT $31.62

KEY PART # DESCRIPTION DEALER PRICEA 10-24523 HDMI F/F $9.80B 10-24526 HDMI F to DVI M $13.47

C 10-24527 HDMI M to DVI F $15.38

HIGH SPEED CABLE FEATURES:• HDMI Ethernet Channel, which allows for a 100 Mb/s Ethernet

Connection between the two HDMI connected devices• Supports Audio Return Channel Functionality• Allows 3D over HDMI when connected to 3D devices• Supports 4K x 2K and 1080p Video Resolutions• Additional Color Spaces (sYCC601, RGB & YCC601)• Gold Plated HDMI (Type A to Type A) Connectors• Data Speed Transfer: 10.2 Gbps• UL Listed

HDMI® High Speed 180 Degree Swivel Cables(No Ethernet)

PART # LENGTH AWG DEALER PRICE32-260-36 3 FT 28 $12.1532-260-72 6 FT 28 $14.2532-260-144 12 FT 28 $20.3232-260-300 25 FT 28 $30.82

PART # LENGTH DEALER PRICE32-231-420 35 FT $42.4932-231-600 50 FT $58.05

HDMI Wall Plates

See Page 47

AV DISTRIBUTION HDMI Cables and Adapters

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T16

Page 19: Milestek 2013 Winter/Spring Dealer Catalog

AV DISTRIBUTION

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

For Expert Customer Service,Call Our Sales Team Today!

HDMI Splitters and Switchers

17

The HDMI Switchers allow access up to five HDMI sources, using one HDTV display. HDMI Switchers are perfect for home theaters, audio/video installations,data centers, information distributions, conference room presentations, schoolsand corporate training environments.

HDMI Switchers

FEATURES:• Switch easily between any 3 or 5 HDMI v1.3 sources• Maintain 480p, 720p, 1080i and 1080p resolutions• Switch inputs with the IR remote control or

MANUAL push button • HDCP and HDMI 1.3 version compliant• Auto searches current signal input when

product is turned on or by controller• Easy installation• Auto power and switching• Compact enclosure, AC/DC power adapter included

KEY PART # DESCRIPTION ENCLOSURE DEALER PRICED 90-12002 HDMI 3 to 1 Switcher Plastic (w/o remote) $36.67E 90-12001 HDMI 3 to 1 Switcher Metal (w/ remote) $59.15F 90-12000 HDMI 5 to 1 Switcher Metal (w/ remote) $72.28

1x2, 1x4 and 1x8 HDMI splitters distribute signal from 1 HDMI source to multipleHDMI displays simultaneously. They offers solutions for HDTV retail and showsites, STB, DVD and Projector factory, noise, space and security concerns, datacenter control, information distribution, conference room presentation, schooland corporate training environments.

HDMI Splitters

FEATURES:

KEY PART # DESCRIPTION ENCLOSURE DEALER PRICEA 90-12003 HDMI 1 to 2 Splitter Metal $17.16B 90-12004 HDMI 1 to 4 Splitter Metal $63.64C 90-12018 HDMI 1 to 8 Splitter Metal $125.45

A

B

C

D

E

F

• Max. cable extension: 10 meters by 28AWGHDMI Cable; 15 meters by 26AWG HDMI Cable;20 meters by 24 AWG Cable

• Input Video Signal: 0.5 -1.0 volts p-p• Input DDC Signal: 5 volts p-p (TTL)• Max Single Link Range: 1920X1200, 1080P• Output Video: HDMI 1.3 + HDCP1.0/1.1/1.2• DVI: 480p/576i/576p/720i/720p/1080i/1080p• Resolutions DTV/HDTV: 480i/576i/480p/576p/720p/1080i/1080P/3D(1080p@24Hz)

• HDMI Version: HDMI 1.3• Operating Frequency: Up to 225MHz• EIDI Duration: 4 seconds• Power supply: DC 5V

Page 20: Milestek 2013 Winter/Spring Dealer Catalog

4x4 HDMI Matrix Switcher4x4 HDMI Matrix Switcher is a full routing type 4-by-4 HDMI Matrix Switch, and any one of input sources is able to be displayed simultaneously on 4 displays. It offers HD video solution for super market; shopping Mall; HDTV, STB, DVD and projector factory; data control center; information distribution; conference room presentation; education and training, corporation show room, luxurious house, etc.

This 4x2 HDMI matrix switcher is with 4 HDMI inputs and 2 HDMIoutputs. It is a true matrix and can distribute any one of 4 sources to either of 2 displays, and can work as a splitter to show the same source on 2 displays simultaneously.It is HDMI 1.3 and supports full HD 1080p.

4x2 HDMI Matrix Switcher

• Distributes any one of 4 sources to either of 2 displays or to both displays simultaneously

• Compatible with full HD 480i, 480p, 576i, 576p, 720p, 1080i and 1080p, and 3D(1080p/24Hz)

• Switch easily between multiple HDMI sources via remote control or via buttons on the unit

• With inner IR receiver to enlarge IR remote control signal• HDMI 1.3 V and compliant with HDCP• Power: 5wtts (Max)• Power Supply: DC 5V

FEATURES:

PART # DESCRIPTION DEALER PRICE

90-12020 4x2 HDMI Matrix Switcher $75.00

PART # DESCRIPTION DEALER PRICE90-12021 4x4 HDMI Matrix Switcher with HDMI 1.3 $300.00

FEATURES:

• It is real HDMI 1.3 version and HDCP compliant• Compatible with full HD 480i, 480p, 576i, 576p,

720p, 1080i and 1080p, and 3D(1080p/24Hz)• Multiple witching modes: IR remote control,

operate manually or operate via RS232 port• With IR extender: enlarge remote control signal• Rack-mountable: with mounting kit and screws• Input video signal: 0.5-1.0 volts p-p• Input DDC signal: 5 volts p-p (TTL)• Audio: LPCM,Dolby-AC3, DTS7.1,

DSD/Dolby TrueHD/DTS-HD master Audio

• HDMI video color format: deep color• Maximum transmission distance: 10 meters by 28AWG cable;

15 meters by 26AWG cable(for further distance, HDMI extender is optional)

• Power consumption: MAX. 36W• Power supply: 12V DC, 3A

AV DISTRIBUTION HDMI Matrix Switchers

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T18

Page 21: Milestek 2013 Winter/Spring Dealer Catalog

HDMI OVER CAT5E/CAT6 SOLUTIONSHDMI Over Dual CAT5E/CAT6 Passive Extender Balun and Wall Plate SetsFEATURES:

• Extends HDMI 1.3 signal up to 100 ft. @ 1080p with CAT6 • Supports HDMI 1.3• Balun and Wall Plate Sets Include Transmitter & Receiver • Video and audio signals are transmitted digitally over

CAT5E/CAT6 cable with zero signal loss• Video Bandwidth: 165 MHz• Connectors: Standard HDMI 19 pin, RJ45 (CAT5E/CAT6)• HDCP/DDC/CEC Compatibility• No power supply required - requires source that provides

5V DC HDMI signal • RoHS compliant• Wall Plate: Not a decora-style wall plate,

Each plate is one piece• Balun: HDMI pigtail cables are 10” long• Solid gauge CAT5E cable may be used, but for optimalperformance and distance CAT6 is suggested for thesepassive devices.

A

B

HDMI Over Dual CAT5E/CAT6 Active Extender Balun Set

FEATURES:•Transmission Range:

o Extends 1080p resolutions up to 115 ft. (35M) over Cat5e Cables o Extends 1080p resolutions up to 164 ft. (50M) over Cat6 Cables

• HDMI 1.3 and HDCP compliant• Includes transmitter & receiver and power adaptor• Video Bandwidth: 165 MHz• Up to 24bit color depth• Connectors: Standard HDMI 19 pin, RJ45 (CAT5E/CAT6)• HDCP/DDC/CEC Compatibility• Power Supply: 5V DC, Receiver Side Only• Required Cables: Solid CAT5E/6 Cables• RoHS compliant

PART # DESCRIPTION DEALER PRICE

90-12006 HDMI Over Dual CAT5E/CAT6 Extender $24.80

KEY PART # DESCRIPTION DEALER PRICEA 90-12034 HDMI Over Dual CAT5E/CAT6 Passive

Balun Extender with HDMI Pigtail Set $48.30

B 90-12035 HDMI Over Dual CAT5E/CAT6 Passive Wall Plate Extender Set

$26.89

AV CAT5E/CAT6 EXTENDERS: Standard pre-made patch cords (stranded-gauge) shouldnÊt be used for these products. Use solid-gauge CAT5E/CAT6 bulkcable throughout installation run, correctly terminated with RJ45 connectors. Avoidbreaking cabling up by going thru CAT5E/CAT6 wall plate jacks and panels. AVover CAT5E/CAT6 extenders in general are designed and tested to work directly

from the original Source device (laptop, BlueRay DVD, cable/satellite box, etc.)to the Display/HDTV. Although success has been experienced, signal performance,compatibility, and endurance over time can't be guaranteed when combinedwith AV receivers/signal processors, converters, switches or splitters/amplifiersbetween the original Source and Display.

AV DISTRIBUTION

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

For Expert Customer Service,Call Our Sales Team Today!

HDMI Over CAT5E/CAT6

19

Page 22: Milestek 2013 Winter/Spring Dealer Catalog

HDMI Over Dual CAT5E/CAT6 3D Bi-Directional IR Active Extender Balun Set

FEATURES:• Supports 1080p @ 60Hz for up to 130 ft. (40M) and 1080i/720p @ 60Hz for up to

196 ft. (60M) using solid-gauge CAT5E/CAT6 cable• Embedded bi-directional infra-red (IR) control path allows user to control the

source device & display remotely• Full-HD HDMI with HDCP, 3D, Deep Color up to 36 bit, 24/48/50/60/120Hz• DTS-HD & Dolby TrueHD multi-channel digital audio, and independent DDC channel.• 225 MHz video bandwidth, 8-level skew compensation• EDID learning capability!• Full IR bandwidth compatibility, IR frequency range: 20KHz to 60KHz• Single-end power that can go on either transmitter side or receiver side• Kit Includes: transmitter & receiver balun, IR transmitter & receiver

cables, mounting screws, and universal locking power adaptor

PART # DESCRIPTION DEALER PRICE

90-12050 HDMI IR 3D Over Dual CAT6 Extender $169.33

PART # DESCRIPTION DEALER PRICE

90-12042 HDMI IR 3D Active Extender Wall Plate, 50M (164 ft.) $139.73

HDMI Over Dual CAT5E/CAT6 IR Active Extender Balun and Wall Plate 3D-Ready Sets

FEATURES:

• Transmission Range: — Extends 1080p resolutions up to 164 ft. (50M) over Cat5e Cables — Extends 1080p resolutions up to 180 ft. (55M) over Cat6 Cables• High Speed Chip Set that Supports 3D, 4K x 2K • Full HD1080P/60HZ, HDCP Compliant• Video Bandwidth: 225 MHz • Includes IR Adapter Cables for both Transmitter and Receiver • Supports Digital Audio Format, DTS-HD/Dolby-True

HD/LPCM7.1/AC3/DTS/DSD• Unique Circuit Design Allows for Protection against High Voltage

and Peak Currents • Tested with Whole Series 7.1 Home Theater Systems• Full IR bandwidth compatibility, IR frequency range: 20KHz to 60KHz

BALUN VERSIONS:•Rack or Wall Mountable • 9V DC, UL Listed Power Supply for Receiver Side• Dimensions: 1.25”W x .875”H x 3.25”D

WALL PLATE VERSIONS:• 50M Version: 5V DC, UL Listed Power Supply for Receiver Side• Dimensions: 2.75”W x 4.5”H x 1.25”D

PART # DESCRIPTION DEALER PRICE

90-12040 HDMI IR 3D Active Extender, 50M (164 ft.) $124.80

IR Adapter Cables

IR Adapter Cables

AV DISTRIBUTION HDMI Over CAT5E/CAT6

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T20

Page 23: Milestek 2013 Winter/Spring Dealer Catalog

HDMI Over Single CAT5E/CAT6 Active Extender Balun SetFEATURES:

•Transmission Range: o Extends 1080p resolutions up to 164 ft. (50M) over Cat5e Cables o Extends 1080p resolutions up to 196 ft. (60M) over Cat6 Cables

• HDMI 1.3 and HDCP compliant• Includes transmitter & receiver and power adaptors• Video Bandwidth: 165 MHz• Up to 24bit color depth• Connectors: Standard HDMI 19 pin, RJ45 (CAT5E/CAT6)• HDCP/DDC/CEC Compatibility• Power Supply: 5V DC, For Transmitter and Receiver Sides• Solid Gauge Cat6 Cable Preferred for This Product

PART # DESCRIPTION DEALER PRICE

90-12017 HDMI Over Single CAT6 Extender $91.13

HDMI Over Single CAT5E/CAT6 3D Active ExtenderBalun SetFEATURES:

• Supports 1080p @ 60Hz for up to 130 ft. (40M) and 1080i/720p @ 60Hz for up to196 ft. (60M) using solid-gauge CAT5E/CAT6 cable

• Full-HD HDMI with HDCP, 3D, Deep Color up to 36 bit, 24/48/50/60/120Hz • DTS-HD & Dolby TrueHD multi-channel digital audio, and independent DDC

channel. • 225 MHz video bandwidth, 8-level skew compensation • EDID learning capability!• Kit Includes: transmitter & receiver balun, IR transmitter & receiver cables,

mounting screws, (2) universal locking power adaptorsPART # DESCRIPTION DEALER PRICE

90-12051 HDMI Over Single CAT5E/CAT6 3D Active Extender Balun Set $182.67

HDMI Over Single CAT5E/CAT6 3D Bi-Directional IRActive Extender Balun SetFEATURES:

• Supports 1080p @ 60Hz for up to 130 ft. (40M) and 1080i/720p @ 60Hz for up to196 ft. (60M) using solid-gauge CAT5E/CAT6 cable

• Embedded bi-directional infra-red (IR) control path allows user to control the sourcedevice & display remotely

• FullHD HDMI with HDCP, 3D, Deep Color up to 36 bit, 24/48/50/60/120Hz • DTS-HD & Dolby TrueHD multi-channel digital audio, and independent DDC channel. • 225 MHz video bandwidth, 8-level skew compensation• EDID learning capability!• Full IR bandwidth compatibility, IR frequency range: 20KHz to 60KHz• Kit Includes: transmitter & receiver balun, IR transmitter & receiver

cables, mounting screws, (2) universal locking power adaptorsPART # DESCRIPTION DEALER PRICE

90-12052 HDMI Over Single CAT5E/CAT6 3D Active Extender Balun Set $202.67

AV DISTRIBUTION

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

For Expert Customer Service,Call Our Sales Team Today!

HDMI Over Single CAT5E/CAT6

21

Page 24: Milestek 2013 Winter/Spring Dealer Catalog

AV DISTRIBUTION HDMI Over Single CAT5E/CAT6

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T22

• HDBaseT (Power over Ethernet) Technology• Supports all HDMI 1.4a 3D formats• Manage both course device and display remotely• Built-in 3 fast Ethernet LAN ports on each module• 340 MHz bandwidth and extends up to 330ft• Provides local HDMI bypass port on TX module• Deep Color Video with EDID pass-thru capability• DTS-HD & Dolby TrueHD multi-channel digital audio• Extends full bandwidth IR and full-duplex RS-232• Includes Transmitter, Receiver and Infra-Red blaster module• Note: This is not an HDMI over LAN device.

FEATURES:

PART # DESCRIPTION DEALER PRICE

90-12046 HDMI Over Single CAT6 All-In-One AV/Networking Extender Set

$412.50

Now combine all your HDTVand networking requirementinto one cutting edge device!This CAT6 active extendertransmit HDMI with HDCPup to 330ft @ 1080p 60Hz.Built-in pass-thru IR controlallows you to manage sourcedevice and RS232 for the dis-play. This unique extender allowslong distance distribution of IR, RS232 serial, audio & video using inexpensive CAT6 cables.

HDMI Over HDBaseT Single CAT6 IR/Serial/Ethernet Extender

HDMI Over HDBaseT Lite Single CAT5E/CAT6 Extenders• Features HDBaseT Lite Technology that transmits uncompressed

full HD digital video, audio, and control signals through a single70m/229ft CAT5E/CAT6 cable with RJ45 connectors

• Transmission Range: Extends 1080p resolutions up 229 ft over asingle CAT5E/CAT6 cable

• Super IR control system, IR transport channel can be forward or backward• Supports Standard IR in 38 kHz mode, includes 1 IR TX and 1 IR RX

FEATURES:• HDBaseT Technology that supports 3D and 4K x 2K• Video Bandwidth: Uncompressed video/audio up to 10.2 Gbps • FullHD1080P• HDCP compliant• Supports Digital Audio Format, DTS-HD/Dolby-True

HD/LPCM7.1/AC3/DTS/DSD• Tested for Compatibility with all leading HD Video brands• Tested with 7.1 Home Theater Systems• (2) 5V DC Power Supplies

A

B

KEY PART # DESCRIPTION DEALER PRICEA 90-12055 HDMI HDBaseT Lite Extender $222.51

B 90-12056 HDMI HDBaseT Lite Wall Plate Extender $240.84

Page 25: Milestek 2013 Winter/Spring Dealer Catalog

AV DISTRIBUTION

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

For Expert Customer Service,Call Our Sales Team Today!

HDMI Over LAN/Ethernet

23

HDMI Over LAN/Ethernet IR ActiveExtender Kit

FEATURES:• Connect Hundreds of Displays to a Single Source • Expand by adding Ethernet Hub and more Receivers • Supports HDMI v1.3 1080p with stereo audio • 225MHz Bandwidth, Plug & Play for easy installation • IR Allows control of source from remote locations • Includes Transmitter, Receiver, and IR transmitter/receiver • Includes AC adapters • HDCP, HDMI v1.3, & RoHS Compliant

KEY PART # DESCRIPTION DEALER PRICE

A 90-12028 HDMI Over LAN/Ethernet IR Extender Kit $322.86

B 90-12029 HDMI Over LAN/Ethernet IR Receiver $167.14

A

B

TECH NOTE: This system is not an HDMI Balun, but an HDMI over IPsystem. This means you can create your own AV Ethernet network andall of the receivers will find the transmitter automatically. It can even beused over smaller existing house networks and low cost LAN switchesand routers.

Allows you to simultaneously send out an HDMI 1.3 Signal to one ormore HDMI displays using one CAT5E/CAT6 cable over a standardmanaged Ethernet infrastructure as well as returns an IR controlsignal to the source to control it. Perfect for multiple display commercial applications such as digital signage and others,bars/restaurants, corporate.

This set includes a transmitter, receiver, and AC adapters. The unitsalso come with one set of IR send and receive control cables shownabove to allow control of source device at any remote display location.

You can distribute HD digital content 330ft/100m from one source toone HD display, or to many displays through unmanaged or managedEthernet switches (330ft/100m max between transmitter/receiver toswitches or between switches to switches). Daisy-chain up to 3 levelsof Ethernet switches to reach a maximum distance of 1,300ft/400mwhile sustaining picture and sound quality.

Page 26: Milestek 2013 Winter/Spring Dealer Catalog

AV DISTRIBUTION HDMI Over CAT5E/CAT6

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T24

• Allows 1 HDMI Source to be Connected to 4 HDMI Displays Devices over Dual Cat5e/Cat6 Cables

• Transmission Range: — Extends 1080p resolutions up to 100 ft over Cat5e Cables — Extends 1080p resolutions up to 110 ft over Cat6 Cables

• High Speed Chip Set that Supports 3D and 4K x 2K • Full HD1080P/60HZ, HDCP Compliant• Super IR & RS232 control system, IR transport channel can be

forward or backward• Supports Digital Audio Format, DTS-HD/Dolby-True HD/LPCM7.1/AC3/DTS/DSD

• Unique Circuit Design Allows for Protection against High Voltage and Peak Currents

• Tested for Compatibility with all leading HD Video brands• Tested with Whole Series 7.1 Home Theater Systems • Rack or Wall Mountable• 9V DC, UL Listed Power Supply for Transmitter Units • 1 x 4 Splitter Dimensions: 12.5”W x 1.125”H x 6.25”D• Receiver Dimensions: 1.75”W x .875”H x 3.25”D

PART # DESCRIPTION DEALER PRICE90-12044 HDMI over Dual CAT5 1x4 Splitter and Receivers $579.47HDIR-T Transmitter IR Adapter Cable (Optional)* $6.95HDIR-R Receiver IR Adapter Cable (Optional)* $6.95

HDMI 1x4 Splitter over Dual CAT5E/CAT6 Extender System

4 ReceiversIncluded

Optional IR Adapter Cables

*CanÊt use general IR cables with these systems; Only HDIR-T / HDIR-R cables will work

PART # DESCRIPTION DEALER PRICE

90-12058 HDMI Over Single CAT5/CAT6 4x4 Matrix Switcherand Receivers Sets with IR / RS232

$1,700.00

HDMI 4x4 Matrix Switch over HDBaseT Lite Single CAT5E/CAT6 Extender System• Offers Unprecedented Flexibility and Convenience by Extending

High Definition Audio/Video and Control Signals from any of4 HDMI Sources to any of 4 Remote Displays over a singleCat5e/Cat6 Cable

• Features HDBaseT Lite Technology that transmits uncom-pressed full HD digital video, audio, and control signalsthrough a single 70m/229ft Cat5e/6 cable with RJ45 connectors

• Transmission Range: Extends 1080p resolutions up to 229 ftover a single Cat5e/Cat6 Cable

• Super IR & RS232 control system, IR transport channel can beforward or backward. IR TX and RX included

• Supports IR control in the 38 KHz mode • Locking HDMI Compatible• 19” Rack Mounting• 12V DC, UL Listed Power Supply for 4 x 4 Matrix Unit• 5V DC, UL Listed Power Supplies for Receiver Units (4 Total)• 4x4 Matrix Dimensions: 17. 5”W x 1.875”H x 3.25”D• Receiver Dimensions (4 Total): 4.4" W x .9" H x 3" D• Includes IR Remote Control

FEATURES• High Speed Chip Set that Supports 3D and 4K x 2K• Full HD1080P/60HZ• Deep Color 24/36 bits

• HDCP Compliant• Supports Digital Audio Format, DTS-HD/Dolby-True

HD/LPCM7.1/AC3/DTS/DSD• Unique Circuit Design Allows for Protection against High

Voltage and Peak Currents• Tested for Compatibility with all leading HD Video brands• Tested with 7.1 Home Theater Systems

4 ReceiversIncluded

Page 27: Milestek 2013 Winter/Spring Dealer Catalog

HDMI OVER COAX SOLUTIONSHDMI over Single RG6/SDI Coax Extender Set

FEATURES:

PART # DESCRIPTION DEALER PRICE90-12024 HDMI over Single RG6 Coax $286.8990-12025 Receiver-Only for Cascading $169.61

• Extends high definition HDMI compliant devices up to400 ft. (120 m) with RG6 dual or quad shield CATVbroadband coax.

• Supports SDI signal distance up to 300M (approx. 1,000ft.) for SD signal, 200M (660 ft.) for HD signal and 100M(330 ft.) for 3G signal

• Supports resolutions 480i/p, 576i/p, 720p and 1080i/p @ 24-60Hz • Due to signal compression technology of this system, supports

screen ratio 16:9 only – not 4:3• Works with HDMI 1.3c and HDCP compliant devices• Operation at 2.970Gb/s, 2.970/1.001Gb/s, 1.485Gb/s,

1.485/1.001Gb/s and 270Mb/s• Equalized and re-clocked loop output• Auto video mode detection (3G/SD/HD)• Conversion from SMPTE 425M level B to Level A for 1080p

50/59.94/60 4:2:2 10-bit• Simultaneous display with SDI and HDMI signalv• Frequency Bandwidth 225MHz/link (HDMI 1.3)• Supplied with a Locking PSU• Consumer Electronics Control (CEC)• Set includes cascadeable transmitter and receiver, (2) 5V power

adapters, plus remote control• Unique system allows signals from 2 input sources to transmit to

1 remote display.• Cascade port is available on both transmitter and receiver,

allowing signal expansion to multiple remote receivers.

AV DISTRIBUTION

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

For Expert Customer Service,Call Our Sales Team Today!

HDMI Over Coax

25

HDMI Over Single Coax Bi-Directional IR Extender Set

FEATURES:• Transmission Range: Extends 1080p Resolution Up to 328 ft (100 m)

over RG-6 Coaxial Cable (Dual and Quad-Shielded);Extends1080p Resolution Up to 164 ft (50 m) over RG-59 Coaxial Cable

• Works with HDMI and HDCP Compliant Devices• Supports High Definition Resolution 1080p• Auto-adjustment of feedback, equalization and amplification• DIP switch for EDID setting• LED indicators for power and signal status• Transfers bi-directional IR control signals, IR RX and TX included• Equipped with ESD (Electro-Static Discharge) protection• Mounting ears are supplied• Power Supply: (2) 5V DC• Dimensions: 5” W x 1” H x 5” D

PART # DESCRIPTION DEALER PRICE90-12026 HDMI Over Single Coax Bi-Directional IR Extender Set $259.93

Page 28: Milestek 2013 Winter/Spring Dealer Catalog

HDMI OVER FIBER EXTENDERS

Allows long distance HDMI distribution up to 1,600 meters @ 1080iand 800 meters @ full HD 1080p utilizing inexpensive and commonlyused multimode fiber optic cabling. Provides pure HDMItransmission with zero signal compression or degradationeven at long distances, and is completely free of Electromag-netic Interference (EMI) which can be common withCAT5E/CAT6 copper cabling in certain critical environments.Unique, exclusive design of 3D-ready version provides loop-up HDMIport on transmitter for local monitor, and 2 HDMI outputs on receiverto connect 2 HD displays! So this device is both a signal extender andsplitter in one.

Why HDMI over Fiber instead of HDMI over CAT5E/CAT6?In addition to the obvious distance advantages, there are some applications whereElectromagnetic Interference (EMI) is common such hospitals, government building,broadcast facilities, industrial factories, high-security areas and others. Although AVdistribution over CAT5E/CAT6 is widely popular, when used in these types of environments, electrical noise causing signal in-and-outs and cross talk with other cables can occur.

However fiber optic cabling is totally immune to such EMI issues, making the idea ofcombining it into increasingly popular HD video distribution applicationsvery appealing. Signal flow through fiber will not interfere withother equipment or cables. Fiber is also safer for security purposessince it can’t be interrupted or spliced like CAT5E/CAT6.

KEY PART # DESCRIPTION DEALER PRICEA 90-12070 HDMI Over Fiber Optic Extender With IR (1,200m) $621.33B 90-12071 HDMI Over Fiber Optic 3D Extender With IR (1,600m) $980.00

HDMI over Fiber Optic Extenders with IR Pass-Thru A

FEATURES:• Completely free of Electromagnetic Interference (EMI)• Supports video resolution up to full HD 1080p/60Hz,

2K and 1920 x 1200• Extend HDMI signal up to 1,600 meters @ 1080i / 800 meters @ 1080p• Pure digital transmission at great distances with zero signal compression• Compatible with 7.1 channel audio• IR pass-thru extending function, IR cables included

B

SPECIFICATIONS:• Total Fiber Bandwidth: 7.5Gbps• Video Amplifier Bandwidth: 165MHz (4.95Gbps)• Video Support: 480i, 480p, 720p, 1080i, 1080p/60Hz,

Full HD (1920 x 1080), WUXGA (1920 x 1200)• Deep color supported: up to 24 bit color space• Extension Distance: 800 meters (1080p) / 1,600

meters (1080i)• IR frequency bandwidth: 38KHz• HDMI, Fiber, IR Connection: HDMI Type A / SC

Multimode / 3.5mm• Fully compliant with HDMI 1.3 and 1.4 high-speed

specifications• 3D-Ready, HDCP compliant• Auto signal equalization and EDID learning• Power Supplies (2): 5V DC

Part # 90-12071

AV DISTRIBUTION HDMI Over Fiber

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T26

Page 29: Milestek 2013 Winter/Spring Dealer Catalog

PART # DESCRIPTION DEALER PRICE90-12038 SDI to HDMI Converter $61.54

PART # DESCRIPTION DEALER PRICE90-12039 PC to HDMI/VGA Over LAN Converter $135.39

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

For Expert Customer Service,Call Our Sales Team Today! 27

HDMI Converters

This converter is ideal for broadcast/production studio applications where SDI is the standard interface. This convertermakes it easier for professionals to distribute and extend 3GSDI signals while providing the ability to display productionwork on HDMI displays instead of more expensive SDIcompatible displays.

SDI to HDMI Converter

• Input: 1xSDI; Output: 1x HDMI• Auto-detect resolution of HD-SDI, SD-SDI and 3G-SDI• Date rate: 270Mb/s, 1.485Gb/s, 2.97Gb/s. Impedance: 75Ω• Supports signal transmission distances of up to 300M for SDI

signals, 200M for HD signals and 100M for 3G signals• SDI input: SD 525i, 625i; HD720P@24HZ, 720P@25HZ,

720P@30HZ,720P@50HZ, 720P@60HZ, HD 1080i@50HZ;1080i@60HZ; HD 1080P@24HZ, 1080P@25HZ,1080P@30HZ, 1080P@50HZ,1080P@60HZ

• HDMI output:720P@50Hz, 720P@60Hz, 1080i@50Hz,1080i@60Hz, 1080P@24Hz, 1080P@25Hz, 1080P@30Hz,1080P@50Hz, 1080P@60Hz. Recommended resolutions: 720P@50Hz;720P@60Hz

FEATURES:

PC RJ45 to HDMI/VGA Over LAN ConverterRegardless of what output connections your PC/laptop may have, this cutting-edge converter allows extension of computer screen and control by directlyconnecting to computer’s RJ45 Ethernet port with CAT5E/CAT6 cabling.Connect straight to the converter on display end, up to 328ft/100m away,or run signal through dedicated Ethernet switch/router first. Providesoutputs for either HDMI or VGA for display, and includes twoUSB ports to control PC peripherals such as keyboard and mouse.Perfect networking display solution allows multiple usersconnected to same network to access a remote display. Userscan share multimedia content stored on their computer fromanywhere in building or facility.

• Supports up to HD 1080p or 1920x1080 resolutions with primarydisplay, mirror desktop and extended desktop video modes

• Multiple PCs and multiple converters/displays can be connected to samerouter, but product supports only one PC-to-display connection at a time.

• Allows multiple users to share a Multi-Function Print (MFP) overa network to print, scan, and fax from any networked computer

• Support 500mA electric current for both USB ports (not compatiblefor combination with other USB hubs)

• Supported protocols: TCP/IP, LPR, DHCP, UPnP• Ethernet IEEE 802 3 10Base IEEE• Standards: 802.3 10Base-T; 802.3U 100Base-T• Network Interface: 10/100/1000 Mbps, RJ45• Support Windows 7,Vista and XP; software driver included

FEATURES:

AV DISTRIBUTION

Page 30: Milestek 2013 Winter/Spring Dealer Catalog

PART # DESCRIPTION DEALER PRICE90-12049 HDMI Audio Extractor $77.60

HDMI Audio Extractor

FEATURES:

• Use to extract audio signals from an HDMI source • Allows simultaneous output of toslink or coaxial digital and stereo

3.5mm analog audio signals• Supports 2.0CH/5.1CH audio switch• Supports High Definition Resolution 1080p and 3D• Supports 225 MHz/2.25 Gbps Per Channel Bandwidth (6.75 Gbps

All Channels)• Supports 12 Bit per Channel Deep Color, 36 Bit Total• Supports Uncompressed Audio LPCM (Linear Pulse Code Modulation)• Supports Compressed Audio DTS Digital, Dolby Digital (DTS-HD

and Dolby True HD)• HDCP Compliant• Power Supply: 5V DC, UL Listed• Dimensions: 2.75" W x .75" H x 2.378"

PART # DESCRIPTION DEALER PRICE90-12037 USB to HDMI Converter $58.67

USB to HDMI ConverterConnects PC to HDTV via USB port.It is designed to add a HDMI port to any computer(Mac or PC) and has limitless applications in bothconsumer and commercial environments. Fromdigital signage to home theater, the all newUSB2-HDMI provides a simple solution forviewing content from a computer on any HDTVmaking it the perfect device for any consumer orcommercial application. Set up is as simple asplug and play; convenient for any user, no matterthe level of technical knowledge.

• HDTV or projector compatible • It supports resolution up to 1920x1080 (1080P) 32bit true color• It is capable of mirroring or extending display• Standard and wide-screen both are supported (4:3 or 16:9)• Compatible with all kinds of CRT and LCD monitors• Auto display ID by VESA compliant protocols

FEATURES:• Audio embeded with HDMI• Easy installation• Powered from USB and no external power adapter is needed

AV DISTRIBUTION HDMI Converters

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T28

Page 31: Milestek 2013 Winter/Spring Dealer Catalog

This converter is designed to take video and audio signal fromPC or Laptop and upscale it to digital HDMI output of wide-rangeHDTV and PC resolutions, up to 1080p. Plug and play, nosoftware is needed. Great for connecting the VGA video outputof your computer or media server and integrating it into a newdigital HDMI Home Theater System.

VGA 3.5mm Audio to HDMI 720p/1080p Converter Scaler

• Up-scales VGA to HDMI 720P or 1080P• Supports VGA Input: 640x480@60/75Hz, 800x600@60/75Hz,

1024x768@60Hz, 1280x720@60Hz, 1280x800@60Hz,1280x960@60Hz, 1360x768@60Hz, 1440x900@60Hz,1400x1050@60Hz, 1680x1050@60Hz, 1920x1080@60Hz.(Recommended input resolution: 1024x768@60Hz)

• Supports HDMI Output: 720p/60Hz, 1080p/60Hz• Auto-store setting of output resolution• Product Dimension: 119 x 74 x 23 mm ( L x W x H )• HDMI 1.3 and HDCP compliant• Maximum Operation Range: 49.5 ft. (15 m)• Power Supply: DC 5V, AC 100-240V

FEATURES:

PART # DESCRIPTION DEALER PRICE90-12014 VGA to HDMI Converter $48.25

The HDMI to VGA Audio converter converts digital HDMI orDVI signals into analog VGA and stereo audio. It is a perfect solution for connecting video cards (desktop or laptop) or consumer electronics devices such as game consoles or home theater receivers that offer an HDMI Out port to a VGA display.

• It is purely for conversion between video formats but notconvert the input

• Easy to use,no settings and it is a resolution pass-throughconverter

HDMI to VGA 3.5mm Audio Converter

• Input HDMI Resolution: 480P@60Hz, 576P@50Hz,720P@50/60Hz, 1080i@50/60Hz, 1080P@50/60Hz,800x600@60Hz, 1024x768@60Hz

• Input DVI resolutions: 800x600@60Hz, 1024x768@60Hz • Output VGA: 640x480@60Hz, 720x576@50Hz,

1280x720@50/60Hz, 1920x1080@50/60Hz, 800x600@60Hz,1024x768@60Hz

• Output audio format: 2 channel LPCM • Compatible with HDMI 1.3 and HDCP • Compatible with DVI by a DVI-HDMI cable or connector.

SPECIFICATIONS:

PART # DESCRIPTION DEALER PRICE90-12031 HDMI to VGA Audio Converter $50.43

AV DISTRIBUTION

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

For Expert Customer Service,Call Our Sales Team Today!

HDMI Converters

29

Page 32: Milestek 2013 Winter/Spring Dealer Catalog

Component Video to HDMI Converter

• Device Type: Component Video to HDMI converter. InterfaceType: YPbPr and Stereo audio In, HDMI Out

• Purely for conversion between video formats, not to convert theinput/output video resolutions

• Compliant with HDMI 1.3 and HDCP• Input Component Video: 480P@60Hz, 576P@50Hz,

720P@50/60Hz, 1080i@50/60Hz• Output HDMI: 480P@60Hz, 576P@50Hz,720P@50/60Hz,

1080i@50/60Hz • Supports SPDIF digital 5.1 audio• HDMI Transmission Rate/Bandwidth: 5Gbps• Maximum Signal Transmission Distance: 49.5 ft (15 meters)• Output Video Impedance Matching: 75Ω• Compatible with HDMI 1.3 and HDCP• Working Temperature: -25℃~75℃• Working Humidity: 10%-60%• Power Supply: DC 5V 1A

FEATURES:

PART # DESCRIPTION DEALER PRICE90-12012 Component Video to HDMI Converter/Scaler $48.75

Component Video (YPbPr) to HDMI converter box transforms ComponentVideo (YPbPr) and Audio R/L or SPDIF signal to HDMI output. Itenables the connection of devices with YPbPr output, e.g. PSP, PS2, Wii,XBOX, STB, DVD, Player, Projector, etc. to HDTV, offering you perfectview when you watch movies or play games.

HDMI to Component Video Converter

• Input HDMI : 480P@60Hz, 576P@50Hz, 720P@50/60Hz, 1080i@50/60Hz • Output YPbPr : 480P@60Hz, 576P@50Hz,720P@50/60Hz, 1080i@50/60Hz • Audio output format: 2 channel LPCM • Supports 165MHz/1.65Gbps per channel (6.75Gbps all channel) bandwidth • Output Video Impedance Matching: 75Ω • Compatible with HDMI 1.3 and HDCP • Working Temperature: -25℃~75℃• Working Humidity: 10%-60%

FEATURES:

PART # DESCRIPTION DEALER PRICE90-12032 HDMI to Component Video Audio Converter $50.43

HDMI to Component Video Audio Converter allows you to enjoy yourhigh definition image & sound when watching movies or playing gameson the older component TVs or projectors that no HDMI input.

- It is purely for conversion between video formats but not convert the input/output video resolutions;

AV DISTRIBUTION HDMI Converters

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T30

Page 33: Milestek 2013 Winter/Spring Dealer Catalog

RCA Composite video and S-video to HDMI Scaler takes either CompositeVideo or S-Video as input and converts it to HDMI. It allows older analogdevices to be integrated into HD home theater system.

• Scales up Composite Video or s-video to HDMI 720p• Motion Compensated 3D Wavelet Video Coding Technology is applied

to make the converted picture rich in color and more vivid• Input audio is integrated into HDMI output as well as pass-through to

earphone or sound box• Input video systems - NTSC and PAL is automatically detected and adjusted

FEATURES:

PART # DESCRIPTION DEALER PRICE90-12015 Composite Video/S-Video

to HDMI Converter$58.83

Composite Video/S-Video to HDMI Converter Scaler

• Output Signal: Composite Video (1.0Vpp), S-Video(Y:1.0Vpp、C:0.3Vpp) • Output Video Systems: PAL/NTSC • Output Video Impedance Matching: 75Ω • Compatible with HDMI 1.3 and HDCP • Working Temperature: -25℃~75℃• Working Humidity: 10%-60%

SPECIFICATIONS:

PART # DESCRIPTION DEALER PRICE90-12033 HDMI to Composite

Video/S-Video Converter$62.19

AV DISTRIBUTION

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

For Expert Customer Service,Call Our Sales Team Today!

HDMI Converters

31

HDMI to Composite Video/S-Video Converter

Page 34: Milestek 2013 Winter/Spring Dealer Catalog

AV DISTRIBUTION VU TelePresence® HD Videoconferencing

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T32

Why Choose VU TelePresence®

VU TelePresence is a smarter way to conduct meetings, reviews,interviews, and other business-related events, without the costand hassle of travel. More than a business solution, VU is the ex-perience of meeting people across the globe using the latest intelecommunication technology, yet feeling as if they were sittingacross the table from you.

Who uses VU? Any business where direct, clear, person-to-person communication is necessary.Our systems are in demandand widely used by professionals around the globe.

No other telepresence product on the market today offers you thearray of features and benefits at such an affordable price. In addi-tion to its comparable features such as camera support (720p and1080p), multipoint capability, and H.264 or H.323 High Profile,VU TelePresence differentiates itself by offering:

Interoperable. Mobile. Affordable.

VU TelePresence systems are easily integrated with third-partysystems, making video collaboration with clients, customers andcolleagues around the world effortless. All you need is the VUsystem and a broadband connection to get started.

VU TelePresence systems were designed around the growing demands of busy professional and the ability to do business andcommunicate anytime and anywhere. Whether you're sitting in ateam meeting in a company boardroom, working in your homeoffice, or out on the road traveling, VU's technology offers manyattractive mobile solutions:

• Dual-Display Video conferencing Capability• AV Cart Compatible• WebVU (PC-based video conferencing)• Transport Ready • Easy Set-Up• Screen + Document -Sharing

• Built-in PC Clients• Recording Capability• Presence-Based Contact List• Data Collaboration

HD Videoconferencing SystemsVU Pro 720p HD System

• 720p camera at 30 frames per second• FireWire HD-Quality Camera• Pan Tilt and 65 Degrees LFV(Large Field of Vision)• 3.8x Optical Zoom• Multi-Function Remote Controller

VU Pro 1080p Full HD System

• 1080p camera at 60 frames per second• HDMI Interface• Pan Tilt and 70 Degrees LFV (Large Field of Vision)• 10x Optical Zoom• Multi-Function Remote Controller• Connections: HDMI, RS232, CVBS, HD-SDI, Component(Y,Pb,Pr)

PART # DESCRIPTION DEALER PRICE90-12060 VU Videoconferencing 720P HD System $1,332.00

PART # DESCRIPTION DEALER PRICE90-12061 VU Videoconferencing 1080P HD System $2,665.33

System Includes: Media Control Unit/Codec, Camera,Speaker Bar, Microphone, Keyboard, Camera Remote, Cables(1 HDMI, 1 Firewire, 1 Power,1 RCA, & 1 VGA).

System Includes: Media Control Unit/Codec, Camera,Speaker Bar, Microphone, Keyboard, Camera Remote, Cables(2 HDMI, 1 Power,1 RCA, and 1 VGA).

Page 35: Milestek 2013 Winter/Spring Dealer Catalog

AV DISTRIBUTION

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

For Expert Customer Service,Call Our Sales Team Today!

VU TelePresence® HD Videoconferencing

33

Both Systems Include:

• H.264 or H.323 based signaling• Multiple Program Processing Using Multi-Core Processors• Multi-Party Conferencing Capability• Easy PC Screen Sharing (XP / Vista / Windows 7)• Recording + Archival of Video Sessions• (Stores up to 2500 Hours)• Dimensions: 15” D x 14.5” W x 6” H

Keyboard & Mouse• Wireless Keyboard• Built-in Optical Mouse

Speaker• Clear Voice Speaker• Supports Headphone Jack 3.5mm from Microphone

Microphone• Crisp, Clear Audio• Built-in Acoustic Echo Cancellation

• Noise Cancellation• Recording + Archival of VideoSessions

• 14 Feet Pick Up Range

• H.264 or H.323 based signaling • Low Bandwidth Requirements• Telepresence with full HD capability• Multi-party conferencing (up to 5 parties)• Interoperability with other major videoconferencing systems

• Recording and archival of teleconference sessions• Desktop sharing and collaboration

FEATURES:

• Ready-to-use plug and play solution• Dual-display video conferencing• International Language Suppose (English, Arabic

and Russian)• Security: AES 128-bit encryption of AV traffic between VU units

• 3-year warranty for support and maintenance included

Media Control Unit/Codec

Page 36: Milestek 2013 Winter/Spring Dealer Catalog

AV DISTRIBUTION VU TelePresence® HD Videoconferencing

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T34

• Maximum Resolution: 1920x1080• 1080p Camera Connections: HDMI, RS232, CVBS, HD-SDI,

Component (Y, Pb, Pr)• Widescreen 16:9 Aspect Ratio for All Resolutions• Progressive Scanning• H.264 or H.323 Compliance for future Interoperability

Video Specifications / Video Resolutions and Format (1080p Camera)

• HD Wideband Codec• Audio Input / Output• 1 Mic (USB Microphone)• 1 Speaker (Connected to USB Microphone)

Audio Standard and Protocols • High-Clarity Audio• Full Duplex• Echo Canellation for Echo-Free Calls• Automatic Gain Control• Automatic Noise Reduction

Audio Characteristics

• Up to 100 Local Directory Entries• Missed Call Notification• Received / Dialed Call Directory• International Language Support (English,Russian and Arabic)

Directory and Address Book

• Maximum Resolution: 1280x720• Widescreen 16:9 Aspect Ratio for All Resolutions• Progressive Scanning• H.264 or H.323 Compliance for future Interoperability

Video Specifications / Video Resolutions and Format (720p Camera)

• TCP 5222 XMPP: For XMPP registration and authentication.XMPP is the primary signaling protocol for VU TelePresence®system to establish a call.

• TCP 2202 SSH: Used in the case remote. Required by VU support teams. For security purposes, the SSH connection may only bestarted by the VU initialized by VU support teams. SSH is usedas a reverse SSH for support when initiated by the client.

• TCP 1720: For H.323-Based Signaling Mode.• TCP 8080 HTTP: Used for Standalone Mode.• TCP 7011: For H.323-Based Signaling Mode.• TCP/UDP 5060 SIP: UDP and TCP are required when

using the VU unit for point-to-point interoperability between manufactures using SIP.

• TCP/UDP 7009: For relay server.• UDP 7000 and 7010: UDP are required for the upload and

download of audio.

The below port access is required for both inbound and outbound call flow:

Network Configuration Setup

If this list of ports is available, then setup and configuration ofthe VU system will operate right out of the box with a workingInternet connection. For the best performance of the VU systemand for interoperability capability, the system must be setup on apublic IP. Special port forwarding rules can be applied whennecessary for the VU systems to operate properly.

If your organization is conducting web content filtering, thebelow websites must be added to your network’s list of trustedsites. Please also add these sites to the trusted site list of yourweb browser or personal firewall on your PC in order to utilizethe PC video client:

• vuusa172.opencloudapi.com - Required for patch servers andremote support capability

• vuusa26.opencloudapi.com - Required for patch servers and remote support capability

• talk.vutelepresence.com - Required for web conferencing• screenshare.vutelepresencego.com - Required to enable

screen sharing

Page 37: Milestek 2013 Winter/Spring Dealer Catalog

AV DISTRIBUTION

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

For Expert Customer Service,Call Our Sales Team Today! 35

VU TelePresence® HD Videoconferencing

Further Details Available at Milestek.com

Quick Start Guide Connection Diagram

Page 38: Milestek 2013 Winter/Spring Dealer Catalog

KEY PART # DESCRIPTION DEALER PRICEA 32-235-36 SVGA Ferrite/3.5 MM Stereo M/M 3' $4.40A 32-235-72 SVGA Ferrite/3.5 MM Stereo M/M 6' $5.50A 32-235-120 SVGA Ferrite/3.5 MM Stereo M/M 10' $6.78A 32-235-300 SVGA Ferrite/3.5 MM Stereo M/M 25' $13.67A 32-235-600 SVGA Ferrite/3.5 MM Stereo M/M 50' $20.83A 32-235-900 SVGA Ferrite/3.5 MM Stereo M/M 75' $32.67B 32-207-Y SVGA/2 Monitor Share M/2F $2.92

Male to Male

VGA/RGBHS CablesUsed to attach a monitor with RGB, vertical sync and horizontal inputsto a PC’s VGA port, VGA/RGBHS cables are configured with aHD15M at the PC end to five BNC male plugs for the monitor end.

SVGA with Audio Cables

SVGA Cables

Male to FemalePART # SIZE DEALER PRICE32-206-36 3Ê $4.2532-206-72 6Ê $5.1732-206-120 10Ê $6.5832-206-180 15Ê $8.0832-206-300 25Ê $11.3332-206-420 35Ê $14.1732-206-600 50Ê $19.8332-206-900 75Ê $28.8332-206-1200 100Ê $39.17

PART # SIZE DEALER PRICE32-208-36 3Ê $4.2532-208-72 6Ê $4.3532-208-120 10Ê $6.5832-208-180 15Ê $8.0832-208-300 25Ê $11.3332-208-420 35Ê $14.1732-208-600 50Ê $19.8332-208-900 75Ê $28.8332-208-1200 100Ê $32.50

A B

PART # SIZE DEALER PRICE32-210-72 6 ft. $9.5832-210-120 10 ft. $12.00

ID BIT / DDC COMPATIBLE

VGA CABLESThese premium Super VGA HD15 cables are ideal for video presentation devices, video splitter and KVM. Constructed of premium grade shielded video cable, which uses a combination of

coax and twisted pair, these Super VGA cables feature mini-coax,overall shield cable with high density 15-pin connectors. Ferritecore helps eliminate EMF interference.

FEATURES:• Resolution: Tested up to 1600 x 1200• Supports up to UXGA

SVGA HD15 with 3.5mm stereo audio plugs for extending audio aswell as video. Double shielding (foil and braid) provides maximumEMI/RFI protection. This is a supreme high performance solution forquickly connecting your PC to a video display system with speakers.

Male to Male

Plenum SVGA Cables100% Plenum Rated jacket.

PART # SIZE DEALER PRICE32-250-72 6Ê $67.1432-250-180 15Ê $77.1432-250-300 25Ê $80.0032-250-420 35Ê $82.8632-250-600 50Ê $110.00

PART # SIZE DEALER PRICE32-250-900 75Ê $160.0032-250-1200 100Ê $329.9332-250-1800 150Ê $385.71

ID BIT / DDC COMPATIBLE

VGA WALL PLATES

KEY PART # DECRIPTION DEALER PRICEA 60-13044 VGA Wall Plate Insert with Dual Keystone Openings $15.11B 60-13042 VGA Wall Plate $6.43C 60-13043 VGA Dual Wall Plate $12.04

KEY PART # DECRIPTION DEALER PRICED 60-13145 VGA and L/R Audio RCA Jacks Decor Wall Plate $11.55E 60-13144 VGA with 3.5mm Stereo Audio Wall Plate $9.00

B EDCA

AV DISTRIBUTION VGA Cables and Wall Plates

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T36

Page 39: Milestek 2013 Winter/Spring Dealer Catalog

While plastic wall plates provide an adequate solution, MilesTekunderstands that some commercial environments are more physicallydemanding and require a more durable metal wall plate.

With durability in mind, we are pleased to introduce our new high-quality, clear anodized aluminum wall plates. These plates provide arugged mounting surface for professional AV connectivity and aredesigned to stand up to years of continued service while maintaining anaesthetically pleasing appearance. Each plate is individually assembledand engraved, and comes complete with matching mounting hardware.

These plates are perfect for commercial systems integration. Examplesof applications include classroom and educational facilities, corporateconference rooms and boardrooms, houses of worship, and other

digital signage areas. Combined with our AV cables and devices,MilesTek customers now have professional end-to-end installation solutions.• Includes engraved text • Durable 1/8" (11 gauge) aluminum • Double beveled edges, .0635 at 45 degrees • Clear anodized finish • Vertical grain • Feedthrough Connectors• Matching mounting screws supplied • Fits standard low voltage boxes • Made in the USA

PROFESSIONAL VGA ALUMINUM WALL PLATES

KEY PART # DESCRIPTION DEALER PRICE

A 60-53042 1 Gang VGA Wall Plate $15.05

B 60-53043 1 Gang Dual VGA Wall Plate $23.00

C 60-53144 1 Gang VGA w/ 3.5 Audio Wall Plate $24.04

D 60-53145 1 Gang Dual VGA w/ 3.5 Audio Wall Plate $39.01

E 60-53146 1 Gang VGA w/ 3.5 Audio, 3 RCA Wall Plate $39.15

F 60-53246 2 Gang Dual VGA w/ 3.5 Audio, 3 RCA Wall Plate $41.88

G 60-53147 1 Gang VGA w/ 3.5 Audio, RJ45, 3 RCA Wall Plate $52.90

B C DA

F G

E

Custom Configurations Available

B

C

D

E

F

G

H

A

D-Sub/HD Gender Changers

KEY PART # DESCRIPTION DEALER PRICEA 10-24500 DB9 M-M $1.25B 10-24501 DB9 F-F $1.25

10-24508 DB9 M-F $2.00C 10-24502 DB15 M-M $2.00D 10-24503 DB15 F-F $2.00

10-24509 DB15 M-F $5.88

KEY PART # DESCRIPTION DEALER PRICEE 10-24504 DB25 M-M $1.63F 10-24505 DB25 F-F $1.63G 10-24506 HD15 M-M $2.50

10-24511 HD15 M-F $3.00H 10-24507 HD15 F-F $2.13

AV DISTRIBUTION

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

For Expert Customer Service,Call Our Sales Team Today!

VGA Wall Plates

37

Page 40: Milestek 2013 Winter/Spring Dealer Catalog

VGA Splitters

KEY PART # PORTS DEALER PRICEA 90-20105 2 $35.10B 90-20106 4 $58.33C 90-20107 8 $99.97

This VGA splitter and distribution amplifier is usedto take video input from a single source and direct itto two, four or eight video outputs for monitorsusing analog signals. The signal boost allows you tonot only split the signal but to extend the distance ofthe signal to about 210 feet. (Your average VGAcard, combined with a standard VGA cable, cansend a clear VGA signal approximately 25 feet.)This makes public broadcasts from a singlecomputer very feasible. If you want to display thesame information on many monitors at once, suchas in a classroom environment, or at a demonstra-tion, this product performs incredibly well.

FEATURES: • 2, 4 and 8 port models available • High 250 MHz video bandwidth • Resolution: 1920 x 1440 in 24 or 32 bit true color mode • Transmission distance of up to 210 feet • Suitable for SVGA, VGA and Multi-sync monitors. • Daisy-Chain multiple units together for even more outputs • Ideal for public broadcasting; remote monitoring; classroom

and training facilities

VGA Splitters with 3.5 Stereo AudioConnects two or four monitors and audio to onecomputer and broadcast to multiple monitors/audiosimultaneously with the VGA with Audio videosplitter. Its built-in video extender ensures clear andsharp images as far as 213ft away from the CPU.Use video splitter to enhance your presentations aswell as broadcasting of real-time data. It is ideal forclassrooms & training facilities, and remote securitymonitoring. To ensure the best video integrity, thevideo splitter has a high bandwidth of 400MHz,

up to 2048x1536 maximum resolution and atwo level cascade capability that provides forfuture expansion. Supports analog plasmascreen & flat panel, projectors and any VGAmonitor types & sizes. Includes power adaptor.

FEATURES: • Multi-function• With 400 MHz Pixel Frequency• Turn on or off the monitor by means of the

front panel switch • Extends video signal for distance up to 65m• Supports the DDC, DDC2, DDC2B

(For video out port 1)

• Can be cascaded• The output is compatible with standard

VGA card• General audio line level output• Allowed to use the general earphone

KEY PART # PORTS DEALER PRICED 90-20202 2 $48.72E 90-20203 4 $100.33

B

C

D

A

E

AV DISTRIBUTION VGA Splitters

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T38

Page 41: Milestek 2013 Winter/Spring Dealer Catalog

E

VGA SwitchersTwo or four computers can share one monitor, projector or any videodisplay with VGA port. This premium video selector has a highbandwidth of 250MHz to maintain video integrity and provides clear &sharp images. Ideal for presentations, classrooms, control center, remote

monitoring & training facilities. Provides high resolution up to1920x1440, status LEDs, front panel port selector and supportsanalog flat panel, projectors & VGA monitors up to 21". Includespower adaptor.

FEATURES: • Resolution up to 1920x1440• Pixel frequency up to 250MHz• Supports DDC1, DC2, DDC2B, DDC2B+, DDC2AB

(For video out port 1)• Hot pluggable• Auto skip over the power-off and suspended PC, and the

unplugged VGA cableKEY PART # PORTS DEALER PRICEF 90-20206 2 $29.17G 90-20207 4 $46.20

F G

VGA Matrix SwitchersFEATURES:

• Resolution up to 1920x1440• Pixel frequency up to 250MHz• Supports DDC1, DC2, DDC2B, DDC2B+, DDC2AB

(For video out port 1)• Hot pluggable• Auto skip over the power-off and suspended PC, and the

unplugged VGA cable

KEY PART # DESCRIPTION PORTS DEALER PRICEA 90-20210 VGA Matrix Switcher 2x2 $34.60B 90-20211 VGA Matrix Switcher 2x4 $93.33

A B

VGA Video Matrix Switchers with AudioFEATURES:

• Intelligent functionality• With 250 MHz Pixel Frequency• Extends video signal for distance up to 65m• Supports the DDC, DDC2, DDC2B. (For video out port 1 and 2)• Can be cascaded• The output is compatible with standard VGA card• Free select from PC(A) or PC(B) or switch off by means of the

front panel switch

This is a video share and video splitter in one switch. Two computerscan share two or four monitors, projectors or any video displays withVGA port (Video Share), or a computer can control the two or fourvideo output and project to all monitors (Video Splitter). This premiumvideo selector has a high bandwidth of 250MHz to maintain video

integrity and provides clear & sharp images. Ideal for presentations,classrooms, control center, remote monitoring & training facilities.Provides high resolution up to 1920x1440, status LEDs, front panelport selector and supports analog flat panel, projectors & VGAmonitors up to 21". Includes power adaptor.

KEY PART # DESCRIPTION PORTS DEALER PRICEC 90-20215 VGA Video Matrix Switcher with Audio 2x2 $101.99D 90-20216 VGA Video Matrix Switcher with Audio 2x4 $127.16E 90-20217 VGA Video Matrix Switcher with Audio 4x4 $222.60

DC

VGA MATRIX SWITCHERS

AV DISTRIBUTION

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

For Expert Customer Service,Call Our Sales Team Today!

VGA Switchers

39

Page 42: Milestek 2013 Winter/Spring Dealer Catalog

MilesTek’s high-resolution VGA over UTP devices extend the yourvideo and stereo audio signals up to 1,000 feet from the VGA sourceusing two CAT5/5E/6 cables. Receiver units have built-in equalization,gain control to adjust brightness and skew control.

This is a perfect and reliable solution for situations where yourVGA monitor needs to be located in maybe a separate room or floor

from where the VGA source, i.e. computer workstation, is located.Running VGA over commonly used CAT5 cable results in greatersignal distance, reduced material costs and ease of installation.

Example applications include larger AV environments such asclassroom and educational facilities, corporate conference roomsand boardrooms, houses of worship, and other digital signage areas.

VGA OVER CAT5E/CAT6 SOLUTIONS

FEATURES:• Set includes transmitter, receiver and power adapters for each• Transmitter module has loop-thru port for local monitor• Supports VGA/WUXGA up to 1920x1440 @ 60Hz.

1920x1200 to 100ft., 1280x1024 to 300ft., 1024x768 to 500ft. • Works with monitors, projectors, HDTV and flat panels

VGA 3.5mm Audio Over CAT5E/CAT6 ActiveExtender Set

PART # DEALER PRICE90-12105 $75.63

SPECIFICATIONS:• CAT5E/CAT6 Cable Equalization: Adjustable EQ Controls • Video Bandwidth: 150Mz• Insertion Loss: Less than 3db• Impedence: RGB - 75 Ohms unbalanced,

CAT5E - 100 Ohms Balanced• Video Signal Return Loss: -15db Max from DC to 60MHz• Audio Frequency: 10Hz to 25KHz / -3dB• Audio Impedence/Connectors: 10k Ohms / 3.5mm• Operating Temperature: 32 to 120 degrees F• FCC, UL, CE, RoHS Compliant

• Extends A/V & control signals• Control a projector or HDTV up to 1,000 ft. over CAT5E/CAT6• Supports full WUXGA high-resolution at max distance• Supports analog stereo and digital SPDIF audio• Supports RS-232 serial with bi-directional IR blaster• Provides adjuctable EQ and gain control• Built-in mounting flange with locking power connectors• Includes transmitter, reveiver and IR emitters• Includes universal 100v-240v power adaptors• FFC, CE & RoHS compliant

FEATURES:

PART # DESCRIPTION DEALER PRICE90-12120 VGA RS232 IR Audio Over CAT5E/CAT6 Extender Set $256.25

VGA RS232 IR Audio Over CAT5E/CAT6 Active Extender Set

• Video Bandwidth: 350MHz• Connectors: HD15 / DB9 / RCA / 3.5MM / RI45• EQ & Gain Adjustment: Rotary• RS-232 Serial: Half-Duplex with Dual-Mode• Infra Red Frequency: 38KHz• Power Supply / Operating Temp: 5v 2A DC / 32 to 131ºF

SPECIFICATIONS:

AV DISTRIBUTION VGA Over CAT5E/CAT6

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T40

Page 43: Milestek 2013 Winter/Spring Dealer Catalog

PART # DEALER PRICE90-12118 $80.00

VGA Audio with Composite Vide/Audio OverCAT5E/CAT6 Passive Extender Wall Plate Set

PART # DEALER PRICE90-12119 $101.25

Intuitive design anticipates both computer and regular A/V application.This wall plate extender kit has shielded casing to meet government,school, and commercial requirements. Using 2xCAT5e RJ45 cables, itprovides both PC VGA & stereo audio along with composite audio andvideo. USB port on transmitter plate allows power delivery via USBcable from laptop/computer when VGA port is non-powered. Supports1280x1024 @60Hz up to 30 Meters.(Local Connectors: 1 HD15/3.5mm, 2 RJ45, 3 RCA female; RemoteConnectors: 1 HD15/3.5mm, 2 RJ45, 3 RCA female)

Extends video signal up to 100 meters (330ft) using the CAT5/RJ45 cable. This extender kit provides equalization and shielded RJ45 port connection. Supportsmaximum resolution of 1600x1200 @ 60Hz for up to 50meters & 1024x768 @ 60Hz for up to 100meters. Includes transmitter &receiver, white decora-style wall plates and mounting screws. Required Cables: Solid CAT5e/6 Cables. No power adapter needed.

VGA Over CAT5E/CAT6 Passive Extender Wall Plate Set

FEATURES:• Transmits video using CAT5e/6 cable• Extends up to 330 feet at 1024x768 with Virtual DDC• Sync-mode provides support for larger video screens• Sync-Filter provides CAT5e/6 signal level adjustment• Supports VGA/UXGA up to 1600x1200 at 60Hz• Includes white decora wallplate and mounting screws• FCC, CE, and RoHS compliant

VGA 3.5mm Audio Over CAT5E/CAT6 ActiveExtender Wall Plate Set

PART # DEALER PRICE90-12106 $77.50

This extender device provides an economical, yet robust way toconnect any VGA/WGA with audio devices using a single CAT5Eor CAT6 cable. Perfect for any presentation application, it has350MHz video bandwidth for clear and sharp images up to 1,000 ft.(300M) away. Provides gain and EQ control for optimal picture anddecora wall plate styling. It supports resolution up to 1600x1200 @60Hz. Includes wall plate transmitter & receiver, and universalpower adapters.

FEATURES:• Included in Kit: (1) transmitter, (1) receiver, (2) 12v DC power adaptors• Signal Type: VGA/SVGA, XGA/WUXGA Video• Bandwidth: 350MHz Connectors: HD15, RJ45, 3.5mm • Insertion Loss: Less than 3db• Impedance: RGB - 75 Ohms Unbalanced / CAT5E - 100 Ohms Balanced • Video Signal Return Loss: -15db Max from DC to 60MHz• EQ & Gain Adjustment: Rotary• Audio Frequency: 10Hz to 25KHz / -3d• Power Supply / Operating Temp: 12v DC 1.2A / 32 to 120˚F• Compliance: FCC, UL, CE, RoHS• Warranty: 1 year• Supported Distances: 1600x1200 @ 60Hzat 100 meters, 1280x1024 @ 60Hz at 120 meters, 1024x768 @ 60Hz at 180 meters,800x600 @ 60Hz at 200 meters, and 640x480 @ 60Hz at 300 meters.

AV DISTRIBUTION

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

For Expert Customer Service,Call Our Sales Team Today!

VGA Over CAT5E/CAT6

41

Page 44: Milestek 2013 Winter/Spring Dealer Catalog

KEY PART # DECRIPTION DEALER PRICEA 90-12114 VGA Audio CAT5E/CAT6 Extend Kit $146.25B 90-12115 2-Port Expandable Receiver Only $83.75C 90-12109 Wall Plate Receiver Only $51.25

VGA Audio CAT5E/CAT6 1x4 Splitter, 2-Port Expandable Receiver Kit

FEATURES:• Provides pass-thru port for local monitor and speaker

° Tx provides up to 4 receivers with local pass-thru port° Rx has build-in 2-Port D/A and RJ45 daisy-chain port° Rx provides equalization and gain control

• Expand as needed with 3-level daisy-chain capability• Supports VGA/UXGA up to 1600x1200 @ 60Hz• Starter Kit includes Tx/Rx and power adaptors• FCC, CE, and RoHS compliant

This extender kit sends VGA video and audio using a single CAT5ecable. The transmitter module has built-in 4-Port RJ45 D/A withloop-out for local screen and speaker. Receiver module has dual-outputVGA/Audio that allows you to connect two-sets of screens andspeakers, it has gain and EQ control for optimal picture, and extraRJ45 port for daisy-chainability up to 3 levels. Supports resolutionup to 1600x1200 @ 60Hz up to 100 meters, 1280x1024 @ 60Hz at120 meters, 1024x768 @ 60Hz at 180 meters, 800x600 @ 60Hz at200 meters and 640x480 @ 60Hz at 300 meters.

A

C

B

AV DISTRIBUTION VGA Over CAT5E/CAT6

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T42

Page 45: Milestek 2013 Winter/Spring Dealer Catalog

DVI stands for Digital Visual Interface. Designed by the DigitalDisplay Working Group (DDWG) it provides a digital to digitalconnection to maximize the quality of high end flat panel monitors

and video cards. DVI-D provides a direct digital only connection.This provides a faster, higher quality connection than analog.

DVI-D Single Link Male/Male Cable

PART # SIZE DEALER PRICE32-215-2M 2 M $10.0032-215-3M 3 M $12.5032-215-5M 5 M $15.00

DVI-D Dual Link Male/Male Cable

PART # SIZE DEALER PRICE32-216-2M 2 M $12.1432-216-3M 3 M $13.57

DVI-D Dual Link Male/Female Cable

Two computers can share one flat panel, plasma monitor, projectoror any video display with DVI port. This premium video selector hasbuilt-in signal booster up to 32ft to maintain video integrity and pro-vides clear & sharp images. Ideal for presentations, classrooms, con-trol center, remote monitoring & training facilities. Provides highresolution up to 1280x1024 60Hz, DDC2 support, status LEDs,front panel port selector. Includes power adaptor and rack mount kit.

DVI Switchers

FEATURES:• Resolution up to 1280x1024• Supports the DDC2 standard for all input ports• Supports DVI-I• Hot plugging

• Auto skip over the power-off and unplugged cable• 1U rack design• 1 DC 9V 300mA Power Adapter• 1 User Manual• 2 Rack rails, 8 screwss

KEY PART # PORTS DEALER PRICEA 90-20504 2x1 $35.71B 90-20505 4x1 $64.29

Connects two or four DVI digital monitors to one computer andbroadcast to multiple monitors simultaneously with the DVI videosplitter. Its built-in video extender ensures clear and sharp images asfar as 32ft away from the CPU. Use video splitter to enhance yourpresentations as well as broadcasting of real-time data. It is ideal forclassrooms & training facilities, and remote security monitoring.

To ensure the best video integrity, the video splitter has a high bandwidthof 165MHz, up to 1600x1200 60Hz maximum resolution and a twolevel cascade capability that provides for future expansion. Supportsdigital plasma screen & flat panel, projectors and any video displaywith DVI port. Includes power cable and rack mount kit.

DVI Splitters

FEATURES:• Supports high-resolution display up to UXGA (25-165 MHz)• Supports DVI-I• Can be cascaded• Compliant with the specification of DVI 1.0• 1 DC 7.5V 1.5A Power Adapter• 1 User Manual• 2 Rack rails, 8 screws

KEY PART # PORTS DEALER PRICEC 90-20502 1x2 $115.91D 90-20503 1x4 $211.11

C D

A

B

DVI CABLES

PART # SIZE DEALER PRICE32-214-2M 2 M $7.1432-214-3M 3 M $9.2932-214-5M 5 M $10.71

AV DISTRIBUTION

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

For Expert Customer Service,Call Our Sales Team Today!

DVI Solutions

43

Page 46: Milestek 2013 Winter/Spring Dealer Catalog

KEY PART # DESCRIPTION DEALER PRICEA 90-12301 DVI Passive Extender Balun Set $29.33B 90-12302 DVI Passive Extender Plate Set $28.00

KEY PART # DESCRIPTION DEALER PRICEC 90-12303 DVI Active Extender Blaun Set $109.33D 90-12304 DVI Active Extender Plate Set $100.00

AV DISTRIBUTION DVI Over CAT5E/CAT6

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T44

DVI Over CAT5E/CAT6 Passive Extenders

The DVI to DVI active UTP extender allows signal distribution using ONLY ONE inexpensive CAT5e/CAT6 cable. Transmitter pigtail supports DVI-D single-link connection, active receiver boxsupports DVI-I single-link connection.

FEATURES:• Extends the transmission distance up to

200ft @1024x768 XGA or 100ft @ 1600x1200 UXGA• DVI 1.1 compliant (Bandwidth = 4.95 Gbps)• Adjustable 8-level EQ control for video quality on receiver• DVI Balun Set: 1xRJ45 input to DVI-D connector• DVI Wall Plate Set: 110-type rear punch down to DVI-I connector• One AC/DC 5V 2A adapter is included for active receiver end.• Not compatible with Mac/Apple computers and monitors

AFEATURES:• Extends the transmission

distance up to 100ft @ 1024x768 • XGA or 50ft @ 1600x1200 UXGA• DVI 1.1 compliant (Bandwidth = 4.95 Gbps)• No power needed• DVI Balun Set: 1xRJ45 input to DVI-D connector• DVI Wall Plate Set: 110-type rear punch down to DVI-I connector• Not compatible with Mac/Apple computers and monitors

DVI Over CAT5E/CAT6 Active Extenders

C

DVI OVER CAT5E/CAT6 EXTENDERS

B

The DVI to DVI passive UTP extender allowssignal distribution using ONLY ONE inexpensiveCat5/6 cable for up to 100ft @ 1024x768 XGA.DVI-D single-link connection.

D

Page 47: Milestek 2013 Winter/Spring Dealer Catalog

MilesTek’s Component and Composite Video over CAT5E/CAT6passive wall plate sets can extend your AV signal up to 300 ft. usingone CAT5E or CAT6 cable. This is a perfect and reliable solutionfor situations where your compatible HDTV needs to be located in

maybe a separate room or floor from where the source device issecurely located. Running Component and Composite Video overcommonly used category UTP cable results in greater signal distance,reduced material costs and ease of installation.

COMPONENT AND COMPOSITE VIDEO OVER CAT5E/CAT6

Component Video over CAT5E/CAT6 Passive Extender Wall Plate Set

PART # DESCRIPTION DEALER PRICE

90-12500 Component Video HDTV over CAT5E/CAT6 Extender Wall Plate Set $33.33

PART # DESCRIPTION DEALER PRICE

90-12501 Component Video HDTV with Digital Audio overCAT5E/CAT6 Extender Wall Plate Set $38.00

Composite Video with Stereo Audio overCAT5E/CAT6 Passive Extender Wall Plate Set

FEATURES:• This CAT5E/CAT6 active wall plate kit extends component

video up to 300ft. • 110-type rear punch down connector for in-wall install. • Component video provides Y/Pb/Pr, up to 1080i @ 164ft & up

to 720p @ 246ft for HDTV. • Set includes source and display wall plate, mounting wall plates

and screws. • No power adapter required. • Required Cables: Solid CAT5E/6 Cables.

FEATURES:• This CAT5E/CAT6 active wall plate kit extends component

video and digital audio up to 300ft. • 110-type rear punch down connector for in-wall install. • Component video provides Y/Pb/Pr, up to 1080i @ 164ft & up

to 720p @ 246ft for HDTV while audio supports RCA SPDIFdigital connection.

• Set includes source and display wall plate, mounting wall platesand screws.

• No power adapter required. • Required Cables: Solid CAT5E/6 Cables.

FEATURES:• This CAT5E/CAT6 active wall plate kit extends composite

video and stereo audio up to 300ft. • 110-type rear punch down connector for in-wall install. • Composite video provides 100ohm while stereo audio have

unbalanced 600ohm impedance. • Set includes source and display wall plate, mounting wall plates

and screws. • No power adapter required. • Required Cables: Solid CAT5E/6 Cables.

PART # DESCRIPTION DEALER PRICE

90-12600 Composite Video with Stereo Audio over CAT5E/CAT6 Extender Wall Plate Set $28.00

Component Video with Digital Audio overCAT5E/CAT6 Passive Extender Wall Plate Set

Component Video with Stereo Audio overCAT5E/CAT6 Passive Extender Wall Plate Set

PART # DESCRIPTION DEALER PRICE

90-12502 Component Video with Stereo Audio over CAT5E/CAT6 Extender Wall Plate Set $33.24

FEATURES:• Extends Component Video/Stereo Audio signal up to

300ft/100m @1080p• 110-type rear punch

down connector for in-wall install.

• Supported Y/Pb/Pr HDTV Resolutions: - 480p up to 500 feet- 720p up to 400 feet- 1080i up to 350 feet- 1080p/24Hz up to 300 feet- 1080p/60Hz up to 300 feet

• Set includes source and display wall plate, mounting wall plates and screws.

• No power adapter required.• Required Cables: Solid CAT5E/6 Cables.

AV DISTRIBUTION

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

For Expert Customer Service,Call Our Sales Team Today!

Component/Composite Over CAT5E/CAT6

45

Page 48: Milestek 2013 Winter/Spring Dealer Catalog

MilesTek’s DisplayPort conversion cables deliver high-definitionaudio/video between your DisplayPort compatible computer/laptop andHDMI, DVI or VGA-compatible display monitor/LCD. DisplayPort isthe next-generation digital display interface standard that was speciallydeveloped for computer applications.

DISPLAYPORT CABLES

PART # LENGTH DEALER PRICE35-210-36 3 ft. $11.6135-210-72 6 ft. $13.4735-210-120 10 ft. $15.7135-210-180 15 ft. $18.54

FEATURES:• Converts DisplayPort connection to HDMI connection (up to version 1.3)• DisplayPort 1.1 Certified• Provides up to 1080p resolution and 1920 X 1200 WUXGA computer resolution

• Maximum bandwidth of 10.8 Gbps• Supports the DPCP (DisplayPort Content Protection) standard inaddition to HDCP

DisplayPort to HDMI Conversion Cables

FEATURES:• Converts DisplayPort connection to Single-Link DVI-D connection• DisplayPort 1.1 Certified• Provides up to 1080p resolution and 1920 X 1200 WUXGA computer resolution

• Maximum bandwidth of 10.8 Gbps• Supports the DPCP (DisplayPort Content Protection) standard inaddition to HDCP

DisplayPort to DVI Conversion Cables

FEATURES:• Converts your digital DisplayPort signal to analog VGA signal• DisplayPort 1.1 Certified• Provides up to 1920 X 1200@60Hz• RGB analog video (VGA port)• Automatic detection and stand by mode• EDID Pre-fetch (VGA EDID Conversion)• Power supply: +3.3V (Form DP)

DisplayPort to VGA Conversion Cable

PART # LENGTH DEALER PRICE35-230-12 6 ft. $37.25

PART # LENGTH DEALER PRICE35-200-72 6 ft. $11.8635-200-120 10 ft. $15.71

FEATURES:• DisplayPort 1.1 Certified• Provides up to 1080p resolution and WQXGA 2560 x 1600 computer resolution

• Maximum bandwidth of 10.8 Gbps• Supports 36-bit color depth and 120 Hz refresh rate• Secure push-tab latching connector• Supports the DPCP (DisplayPort Content Protection) standard inaddition to HDCP

DisplayPort Male to Male Cables

PART # LENGTH DEALER PRICE35-220-36 3 ft. $11.9135-220-72 6 ft. $13.8635-220-120 10 ft. $16.4935-220-180 15 ft. $20.00

AV DISTRIBUTION DisplayPort Cables

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T46

Page 49: Milestek 2013 Winter/Spring Dealer Catalog

HDMI WALL PLATES

KEY PART # DECRIPTION DEALER PRICEA 60-10608 Single HDMI Pigtail Decor Wall Plate $9.51B 60-10609 Dual HDMI Pigtail Decor Wall Plate $14.00

KEY PART # DECRIPTION DEALER PRICE

C 60-10612Single HDMI Pigtail and RGB ComponentVideo Triple RCA Jack Decor Wall Plate

$10.60

D 60-10613Single HDMI Pigtail and 3.5mmStereo Jack Decor Wall Plate

$10.00

E 60-10615HDMI VGA 3.5mm Audio StainlessSteel Feed-Thru Wall Plate

$17.04

COMPONENT AND VIDEO WALL PLATES

KEY PART # DECRIPTION DEALER PRICEF 60-10621 RGB Component Video Triple RCA Jacks Decor Wall Plate $3.76G 60-10622 RGB Component Video with Audio Wall Plate $7.68

KEY PART # DECRIPTION DEALER PRICEH 60-10623 HDMI Wall Plate With Component Video $25.20

WHOLE HOUSE AUDI0 WALL PLATES

KEY PART # DECRIPTION DEALER PRICEM 60-10650 Whole House Audio and 7.2 Home Theater Wall Plate $41.33N 60-10651 7.2 Home Theater Connection Wall Plate $47.69

KEY PART # DECRIPTION DEALER PRICEO 60-10652 6.2 Home Theater Connection Wall Plate $33.33P 60-10653 5.2 Home Theater Connection Wall Plate $24.19

A B C D

F HG

M N O P

HDMI Cables

See Page 16

VGA WALL PLATES

KEY PART # DECRIPTION DEALER PRICEA 60-13044 VGA Wall Plate Insert with Dual Keystone Openings $15.11B 60-13042 VGA Wall Plate $6.43C 60-13043 VGA Dual Wall Plate $12.04

KEY PART # DECRIPTION DEALER PRICED 60-13145 VGA and L/R Audio RCA Jacks Decor Wall Plate $11.55E 60-13144 VGA with 3.5mm Stereo Audio Wall Plate $9.00

B EDCA

E

VGA Cables

See Page 36

AV DISTRIBUTION

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

For Expert Customer Service,Call Our Sales Team Today!

AV Feed-Thru Wall Plates

47

Page 50: Milestek 2013 Winter/Spring Dealer Catalog

COMPONENT VIDEO (RGB) CABLES

RGB Video Cable RGB Video Cable w/ Stereo Audio

Audio/Video RCA Gold Plated Patch Cables

3.5 mm Stereo Audio Patch Cords

Male to Female Extension

PART # SIZE DEALER PRICE30-105-36-BLACK 3Ê $3.6930-105-72-BLACK 6Ê $5.3130-105-144-BLACK 12Ê $7.5430-105-300-BLACK 25Ê $13.6930-105-600-BLACK 50Ê $23.5430-105-900-BLACK 75Ê $35.2330-105-1200-BLACK 100Ê $46.92

Male to Male Audio RCA Gold Plated Patch Cables

RG59 BNC-BNC CablesRG59 BNC to RCA Cables

These high-graded professional component video cables will give you the best conductivity signal andquality. For use with video cameras, DVD, VCRs, DSS, High Definition digital TV (HDTV), VCR,DSS, DVD, TV and so on. Triple heavy-duty, superior shielded RG-59/U cables to maximum signaltransfer and minimize interference. Gold plated RCA plugs to improve conductivity. Color coded andlabeled for the luminance (Y) and chrominance (Pr, Pb) Signals. Fully molded construction.

PART # SIZE DEALER PRICE30-106-36-BLACK 3Ê $5.9230-106-72-BLACK 6Ê $7.0830-106-120-BLACK 10Ê $11.0630-106-144-BLACK 12Ê $11.0830-106-180-BLACK 15Ê $13.2530-106-300-BLACK 25Ê $17.8530-106-420-BLACK 35Ê $24.6230-106-600-BLACK 50Ê $32.6230-106-900-BLACK 75Ê $35.2330-106-1200-BLACK 100Ê $62.31

PART # SIZE DEALER PRICE20-614-72 6Ê $2.9220-614-144 12Ê $5.3320-614-300 25Ê $2.4820-614-600 50Ê $14.17

PART # SIZE DEALER PRICE30-101-36 3Ê $1.0230-101-72 6Ê $1.3630-101-144 12Ê $2.2030-101-300 25Ê $3.67

PART # SIZE DEALER PRICE30-102-36 3Ê $1.8330-102-72 6Ê $2.3630-102-144 12Ê $2.8230-102-216 18Ê $3.7330-102-300 25Ê $7.4530-102-600 50Ê $11.09

PART # SIZE DEALER PRICE20-612-36 3Ê $1.7520-612-72 6Ê $2.0220-612-144 12Ê $4.0020-612-300 25Ê $4.4320-612-600 50Ê $8.3320-612-900 75Ê $24.1720-612-1200 100Ê $30.00

PART # SIZE DEALER PRICE20-613-36 3Ê $3.4220-613-72 6Ê $2.2520-613-144 12Ê $4.1720-613-300 25Ê $27.44

PART # SIZE DEALER PRICE38-100-72 6Ê $0.9038-100-144 12Ê $1.2038-100-300 25Ê $3.2038-100-600 50Ê $5.40

PART # SIZE DEALER PRICE38-101-72 6Ê $1.2038-101-144 12Ê $1.4838-101-300 25Ê $2.1638-101-600 50Ê $3.80

NOW INBLACK!

PART # DESCRIPTION SIZE DEALER PRICE10-22021 3.5mm Stereo Male to (2) 3.5mm Stereo Females 6‰ $1.5610-22022 3.5mm Stereo Female to (2) 3.5mm Stereo Males 6‰ $1.3810-22023 3.5mm Stereo Male to (2) RCA Females 6‰ $1.3810-22025 3.5mm Stereo Male to (2) RCA Males 6‰ $0.7710-22030 3.5mm Stereo Female to (2) RCA Males 6‰ $0.9010-22031 3.5mm Stereo Male to (2) RCA Females 6 ft. $1.4810-22027 3.5mm Stereo Male to (2) RCA Males 6 ft. $1.35

3.5mm Stereo to RCA Y Cables

3.5mm to 2 RCA Y Cables are designed for quality computer audioapplications. 3.5mm audio cables connect the PC sound card,portable CD player or any mini-stereo audio device with 3.5mm orRCA jacks to multimedia speakers. All “Y” cables are 6 inches.

Video RCA to RCARG59 Cables

10-22022 10-22023

AV DISTRIBUTION AV Cable Assemblies

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T48

Page 51: Milestek 2013 Winter/Spring Dealer Catalog

TYPE A BASIC RUN CABLE

DIN14 Connector

• 3-28 AWG Coaxial Cables with Braided Copper Shielding, 3-24AWG Twisted Pair and a single 24 AWG Pair, Mylar™ Foil Shield

• UXGA Supports PC Resolutions up to 1600 x 1200 Pixels Includesprotective caps with pulling eyes that are able to withstand amaximum pulling tension of 30 pounds

• Available in CL2-rated PVC jacket for residential installations andCMP jacket for commercial installations

MALE

O.D. 0.73‰

FEMALE

O.D. 0.73‰

SVGA + Stereo Audio Solution Basic Run Cable: Type A

PART # SIZE DEALER PRICEQC03-HD15M-35M-01 1Ê $5.93QC03-HD15M-35M-03 3Ê $7.65QC03-HD15M-35M-06 6Ê $10.28QC03-HD15M-35M-10 10Ê $13.80

Din14 Male to HD15 Male + 3.5mmStereo Plug Adapter Cable

front

back

A

KEY PART # DESCRIPTION DEALER PRICEA QC04-HD15-35F-FP HD15 VGA + 3.5mm Female Wall Plate $11.00

SVGA High Density DB15 Solution Basic Run Cable: Type A

PART # SIZE DEALER PRICEQC03-HD15-01 1Ê $5.78QC03-HD15-03 3Ê $7.35QC03-HD15-06 6Ê $8.03QC03-HD15-10 10Ê $10.43

Din14 Male to HD DB15 MaleAdapter Cablefront

back

B

KEY PART # DESCRIPTION DEALER PRICEB QC04-HD15-FP HD15 VGA Female Wall Plate $9.17

TYPE B BASIC RUN CABLE

• 5-28 AWG Coaxial cables with Mylar™ Foil and 85% Braided Copper Shielding

• Ideal for A/V and Component Video Applications Compatiblewith Analog and S/PDIF Digital Audio

• Includes protective caps with pulling eyes that are able towithstand a maximum pulling tension of 30 pounds

• Available in CL2-rated PVC jacket for residential installationsand CMP jacket for commercial installations

DIN14 Connector

MALE

O.D. 0.73‰

FEMALE

O.D. 0.73‰

PART # SIZE DEALER PRICEQC03-RWY-01 1Ê $5.25QC03-RWY-03 3Ê $5.93QC03-RWY-06 6Ê $6.90QC03-RWY-10 10Ê $8.55

Din14 Male to 3 RCA Male(RWY) Adapter Cablefront

back

B

KEY PART # DESCRIPTION DEALER PRICEB QC04-RWY-FP 3 RCA Composite Video + Stereo Audio Plate $8.17

SIZE PVC PART # DEALER PRICE PLENUM PART # DEALER PRICE15Ê QC01-B-15 $16.10 QC02-B-15 $50.0025Ê QC01-B-25 $24.23 QC02-B-25 $81.4335Ê QC01-B-35 $32.12 QC02-B-35 $111.4350Ê QC01-B-50 $44.23 QC02-B-50 $157.1475Ê QC01-B-75 $63.55 QC02-B-75 $228.57100Ê QC01-B-100 $75.90 QC02-B-100 $304.29125Ê QC01-B-125 $90.47 QC02-B-125 $380.00150Ê QC01-B-150 $99.67 QC02-B-150 $454.29

SIZE PVC PART # DEALER PRICE PLENUM PART # DEALER PRICE15Ê QC01-A-15 $14.03 QC02-A-15 $34.4425Ê QC01-A-25 $20.18 QC02-A-25 $55.0635Ê QC01-A-35 $26.25 QC02-A-35 $75.2050Ê QC01-A-50 $35.40 QC02-A-50 $106.0975Ê QC01-A-75 $50.70 QC02-A-75 $153.09100Ê QC01-A-100 $66.00 QC02-A-100 $198.74125Ê QC01-A-125 $78.00 QC02-A-125 $253.80150Ê QC01-A-150 $95.70 QC02-A-150 $303.49

PART # DEALER PRICEQC04-D14A-FP $9.67

Din14 Male to Din 14Female „A‰ Wall Plate

Composite Video + StereoAudio Basic Run Cable: Type B

PART # DEALER PRICEQC04-D14B-FP $9.67

Din14 Male to Din 14Female „B‰ Wall Plate

AV DISTRIBUTION

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

For Expert Customer Service,Call Our Sales Team Today!

Quick-Connect Cabling System

49

Page 52: Milestek 2013 Winter/Spring Dealer Catalog

TYPE B BASIC RUN CABLE (continued)

PART # SIZE DEALER PRICEQC03-5RCA-01 1Ê $6.42QC03-5RCA-03 3Ê $8.40QC03-5RCA-06 6Ê $11.40QC03-5RCA-10 10Ê $14.85

Din14 Male to 5 RCA Male Adapter Cable

KEY PART # DESCRIPTION DEALER PRICEC QC04-5RCA-FP 5 RCA Component + Stereo Audio Plate $9.83

Component Video + Stereo Audio Solution Basic Run Cable: Type B

front

back

CPART # SIZE DEALER PRICEQC03-RGB-01 1Ê $5.25QC03-RGB-03 3Ê $5.93QC03-RGB-06 6Ê $6.90QC03-RGB-10 10Ê $8.55

Din14 Male to 3 RCA Male (RGB) Adapter Cable

KEY PART # DESCRIPTION DEALER PRICED QC04-RGB-FP 3 RCA Component Video Wall Plate $8.17

Component Video 3RCA (RGB) Solution Basic Run Cable: Type B

front

back

D

PART # SIZE DEALER PRICEQC03-MD4-01 1Ê $6.23QC03-MD4-03 3Ê $8.18QC03-MD4-06 6Ê $11.18QC03-MD4-10 10Ê $15.23

Din14 Male to 3 RCA + MDIN4Adapter Cable

KEY PART # DESCRIPTION DEALER PRICEF QC04-MD4-FP 3 RCA Composite + S-Video Wall Plate $9.83

Composite Video (1RCA)+ S Video (MIN DIN 4) +Stereo Audio Solution Basic Run Cable: Type B

front

back

FPART # SIZE DEALER PRICEQC03-4RCA-01 1Ê $5.93QC03-4RCA-03 3Ê $7.88QC03-4RCA-06 6Ê $10.88QC03-4RCA-10 10Ê $14.93

Din14 Male to 4 RCA Male Adapter Cable

KEY PART # DESCRIPTION DEALER PRICEE QC04-4RCA-FP 4 RCA Component + Digital Audio Plate $9.17

Component Video (3RCA)+ Digital Audio (1RCA) SolutionBasic Run Cable: Type B

front

back

E

PART # SIZE DEALER PRICEQC03-3BNC-01 1Ê $8.25QC03-3BNC-03 3Ê $9.08QC03-3BNC-06 6Ê $10.35QC03-3BNC-10 10Ê $12.00

Din14 Male to 3 BNC Adapter Cable

KEY PART # DESCRIPTION DEALER PRICEG QC04-3BNC-FP 3 BNC Component Video Wall Plate $9.83

Component Video RGB (3BNC) Solution Basic Run Cable: Type B

front

back

GPART # SIZE DEALER PRICEQC03-5BNC-01 1Ê $11.85QC03-5BNC-03 3Ê $13.80QC03-5BNC-06 6Ê $16.73QC03-5BNC-10 10Ê $20.70

Din14 Male to 5 BNC Adapter Cable

KEY PART # DESCRIPTION DEALER PRICEH QC04-5BNC-FP 5 BNC Component Video Wall Plate $11.50

Component Video RGBHV (5BNC) Solution Basic Run Cable: Type B

front

back

H

AV DISTRIBUTION Quick-Connect Cabling System

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T50

Page 53: Milestek 2013 Winter/Spring Dealer Catalog

TYPE C BASIC RUN CABLE

DIN19 Connector

SIZE PVC PART # DEALER PRICE PLENUM PART # DEALER PRICE15Ê QC01-C-15 $19.37 QC02-C-15 $33.1425Ê QC01-C-25 $25.78 QC02-C-25 $53.7135Ê QC01-C-35 $32.13 QC02-C-35 $72.0050Ê QC01-C-50 $41.72 QC02-C-50 $100.5775Ê QC01-C-75 $50.68 QC02-C-75 $146.29100Ê QC01-C-100 $143.33 QC02-C-100 $293.57125Ê QC01-C-125 $166.60 · ·150Ê QC01-C-150 $196.78 · ·

• 4-28 AWG twisted pairswith Mylar™ foil and drain wire, 28 AWG twisted pair and 5-28 AWG conductors

• Optimized design for TMDS uncompressed digital video; such asHDMI and DVI application.

• Includes protective caps with pulling eyes that are able to withstand a maximum pulling tension of 30 pounds

• Available in CL2-rated PVC jacket for residential installations andCMP jacket for commercial installations

MALE

O.D. 0.73‰

FEMALE

O.D. 0.73‰

PART # SIZE DEALER PRICEQC03-HDMI-01 1Ê $7.20QC03-HDMI-03 3Ê $8.40QC03-HDMI-06 6Ê $10.23QC03-HDMI-10 10Ê $12.72

Din19 Male to HDMI MaleAdapter Cable

KEY PART # DESCRIPTION DEALER PRICEM QC04-HDMI-FP HDMI Female Wall Plate $11.17

M

HDMI Digital Link SolutionBasic Run Cable: Type C

PART # SIZE DEALER PRICEQC03-DVID-01 1Ê $6.98QC03-DVID-03 3Ê $8.10QC03-DVID-06 6Ê $9.90QC03-DVID-10 10Ê $12.15

Din19 Male to DVI MaleAdapter Cable

KEY PART # DESCRIPTION DEALER PRICEJ QC04-DVID-FP DVID Female Wall Plate $11.00K 90-12300 DVID Extender up to 150 ft. $48.33

DVI Digital Link SolutionBasic Run Cable: Type C

J

front

back

K

Din19 Male to DVI MaleAdapter Cable

KEY PART # DESCRIPTION DEALER PRICEL QC04-DVID-35F-FP DVID with 3.5mm Audio Female Wall Plate $26.33

DVI with Audio Digital Link Solution Basic Run Cable: Type C

L

front

back

PART # SIZE DEALER PRICEQC03-DVID-35M-01 1Ê $7.20QC03-DVID-35M-03 3Ê $8.48QC03-DVID-35M-06 6Ê $10.35QC03-DVID-35M-10 10Ê $13.88

PART # DEALER PRICEQC04-D19-FP $16.90

Din19 Male to Din 19Female „C‰ Wall Plate

The HDMI Extender automatically adjusts and compensates forcable attenuation up to 40dB. In addition, it can be powered directlyfrom the cable without an external power supply up to 150 feetwhich is ideal for long distance application.

HDMI Extender/Equalizer (for QC Type C cables 35 ft. or longer)

PART # DESCRIPTION DEALER PRICE90-12009 HDMI Extender/Equalizer $27.8690-12010 HDMI Extender Pigtail Adapter Cable $31.43

90-12009 90-12010

TECH NOTE: Type C Basic Run Cables 35 ft. or longer MUST be usedwith an HDMI or DVI extender/equalizer. See options on this page.

AV DISTRIBUTION

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

For Expert Customer Service,Call Our Sales Team Today!

Quick-Connect Cabling System

51

Page 54: Milestek 2013 Winter/Spring Dealer Catalog

QUICK-CONNECT INTEGRATED WALL PLATES & CABLES

Adapter Cables

KEY PART # DESCRIPTION DEALER PRICE

G QC04-VACPK-1-DFP HD 15, 3.5 mm stereo, Composite Video/Audio with four keystone jacks cutouts Double GangWall Plate with one fly lead $20.90

H QC04-VACPK-2-DFP HD 15, 3.5 mm stereo, Composite Video/Audio with four keystone jacks cutouts Double Gang Wall Plate with two fly lead $24.80

I QC04-VACPSK-2-DFP HD 15, 3.5 mm stereo, Composite Video/Audio and S-video with four keystone jacks cutouts Double Gang Wall Plate with two fly lead

$32.50

J QC04-VACNK-2-DFP HD 15, 3.5 mm stereo, Component Video with four keystone jacks cutouts Double Gang Wall Plate with two fly lead $26.50

Integrated Wall Plate - Single Gang

Integrated Wall Plate - Double Gang

KEY PART # DESCRIPTION DEALER PRICE

A QC04-VR-1-SFP DIN 14 Male to HD 15 F,RCA F/Composite Video Single Gang Wall Plate $11.00

B QC04-A2R-1-SFP DIN 14 Male to 3.5 mm Jack and, 2 RCA F/Stereo Audio Single Gang Wall Plate $15.70

C QC04-VACN-2-SFP HD 15, 3.5 mm stereo, Component Video Single Gang Wall Plate with two fly leads $30.20

D QC04-VACP-1-SFP HD 15, 3.5 mm stereo, Composite Video/Audio Single Gang Wall Plate with one fly lead $19.30

E QC04-VACP-2-SFP HD 15, 3.5 mm stereo, Composite Video/Audio Single Gang Wall Plate with two fly leads $22.20

F QC04-VACPS-2-SFP HD 15, 3.5 mm stereo, Composite Video/Audio and S-Video Single Gang Wall Plate with two fly leads $30.10

A B C D E F

G H I J

KEY PART # DESCRIPTION DEALER PRICE

K QC03-VACP-1-18 DIN 14 Male to HD 15, 3.5 mm stereo, Composite Video/Audio Adapter Cable with 1.5ft long $13.00

K QC03-VACP-1-03 DIN 14 Male to HD 15, 3.5 mm stereo, Composite Video/Audio Adapter Cable with 3ft long $14.67

K QC03-VACP-1-06 DIN 14 Male to HD 15, 3.5 mm stereo, Composite Video/Audio Adapter Cable with 6ft long $18.25

K QC03-VACP-1-10 DIN 14 Male to HD 15, 3.5 mm stereo, Composite Video/Audio Adapter Cable with 10ft long $23.00

KEY PART # DESCRIPTION DEALER PRICE

L QC03-VACP-2-18 DIN14 Male to HD15, Composite Video, and Din14 male to 3.5mm Stereo and 2RCA audio Adapter cables, 2 pieces in a set $13.90

L QC03-VACP-2-03 DIN14 Male to HD15, Composite Video, and Din14 male to 3.5mm Stereo and 2RCA audio Adapter cables, 2 pieces in a set $16.33

L QC03-VACP-2-06 DIN14 Male to HD15, Composite Video, and Din14 male to 3.5mm Stereo and 2RCA audio Adapter cables, 2 pieces in a set $21.25

L QC03-VACP-2-10 DIN14 Male to HD15, Composite Video, and Din14 male to 3.5mm Stereo and 2RCA audio Adapter cables, 2 pieces in a set $27.75

K L

AV DISTRIBUTION Quick-Connect Cabling System

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T52

Page 55: Milestek 2013 Winter/Spring Dealer Catalog

A B C

Interseries Adapters

D

E F G H

I J K L

M N O P

Q R S T

U V W X

Y Z AA

CC

BB

DD EEKEY PART # INTERSERIES ADAPTERS DESCRIPTION DEALER PRICEQ 10-01099 3.5mm Stereo Female to 3.5mm Stereo Female $0.69R 10-01106 3.5mm Stereo Female to ¼” Stereo Male $0.29S 10-01100 3.5mm Stereo Female to 2x3.5mm Stereo Female $0.40T 10-01101 3.5mm Stereo Female to 2 x ¼” Stereo Female $0.58U 10-01104 3.5mm Stereo Male to ¼” Stereo Female $0.27V 10-01105 3.5mm Mono Female to ¼” Mono Male $0.34W 10-01107 3.5mm Mono Male to ¼” Mono Female $0.27X 10-01102 ¼” Stereo Male to 2 x 3.5mm Stereo Female $3.42Y 10-01121 ¼” Stereo Male to 2 x RCA Female $0.80Z 10-01122 3.5mm Stereo Male to 2xRCA Female $0.67AA 10-26054 ¼” Barrel Mono Female to Female $1.11AA 10-26055 ¼” Barrel Stereo Female to Female $3.26BB 10-21538 RCA Bulkhead Barrel 0.5”D $3.07CC 10-21900 RCA Barrel F/F $0.13DD 10-21904 RCA M/F/F $0.89EE 10-21905 RCA F/F/F $0.62

KEY PART # INTERSERIES ADAPTERS DESCRIPTION DEALER PRICEA 10-01014 RCA Male to BNC Male $1.07B 10-01015 RCA Male to BNC Female $0.69C 10-01016 RCA Female to BNC Male $0.79D 10-01118 RCA Female to BNC Female $1.16E 10-01017 F-Type Female to BNC Male $0.87F 10-01018 BNC Female to F-Type Male $1.20G 10-01019 F-Type Female to BNC Female $0.87H 10-01020 F-Type Female to RCA Male $0.87I 10-01021 RCA Female to F-Type Male $0.80J 10-01022 RCA Female to F-Type Female $0.64K 10-01082 RCA Female to ¼” Mono Male $0.53L 10-01083 RCA Female to ¼” Mono Female $1.11M 10-01095 RCA Male to ¼” Mono Female $0.58N 10-01103 3.5mm Mono Female to RCA Male $0.36O 10-01098 3.5mm Mono Male to RCA Female $0.34P 10-01096 3.5mm Stereo Female to 3.5mm Mono Male $0.34

XLR wall plates are madeof stainless steel and contain rear solder-typeSwitchcraft connectors.

PART # DESCRIPTION DEALER PRICE60-03030 XLR Jack (D3F) Stainless $8.0960-03031 XLR Dual Jk (D3F) Stainless $12.9033673-F Audio Cable, 2 Pair - 22 AWG, shielded stranded $0.15

XLR Microphone Cables

XLR Male to Female - Economy

XLR Male to Female - Pro GradePART # SIZE DEALER PRICE31-200-36 3 ft. $15.1731-200-60 5 ft. $19.8931-200-120 10 ft. $25.2631-200-180 15 ft. $24.7631-200-300 25 ft. $43.8331-200-600 50 ft. $82.1031-200-1200 100 ft. $150.57

PART # SIZE DEALER PRICE31-101 36 3 ft. $7.8331-101 60 5 ft. $7.7431-101 120 10 ft. $8.9131-101 180 15 ft. $9.2331-101 300 25 ft. $11.43

XLR Wall Plates

MILESTEK AUDIO CONNECTORS

PART # DESCRIPTION DEALER PRICE10-20512 MilesTek XLR Female 3-Conductor $1.8710-20015 MilesTek XLR Male 3-Conductor $1.7010-26016 MilesTek ¼” Male Stereo $2.2410-26015 MilesTek ¼” Male Mono $0.83BELDEN-8412-F Audio Cable for XLR Plugs/Jacks (black reel) $1.09 ft.

XLR Barrel Adapters

PART # DESCRIPTION DEALER PRICE10-20949 MilesTek XLR M/M Barrel 3-Conductor $1.4910-20948 MilesTek XLR F/F Barrel 3-Conductor $1.87

3 Pin XLR and 1/4” Cable Connectors

Nickel Housing and Contacts

AV DISTRIBUTION

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

For Expert Customer Service,Call Our Sales Team Today!

Interseries Adapters, XLR Audio

53

Page 56: Milestek 2013 Winter/Spring Dealer Catalog

All modules include mounting hardware.

MIXED CONNECTOR PATCH BAY MODULES

• 19” Rackmountable• Compatible with Nuetrik “D” series chassis connectors• Not compatible with Switchcraft Q-G series Available in 1, 2 or 3 rack space with up to 48 ports.

PART # DESCRIPTION DEALER PRICE50-26014 Mixed Connector Patch-bay 1x8 $11.6350-26015 Mixed Conn. Patch-bay 1x16 $15.5850-26016 Mixed Conn. Patch-bay 2x8 $12.7550-26017 Mixed Conn. Patch-bay 2x16 $15.0550-26018 Mixed Conn. Patch-bay 3x8 $13.9250-26019 Mixed Conn. Patch-bay 3x16 $16.0050-99014 Flat Head Blk Screw Set $0.3950-99015 Pan Head Blk Screw Set $0.35

A B C D E F

G H I J K

L M N O P

KEY PART # DESCRIPTION DEALER PRICEA 50-26024 XLR Male Black/Nickel $4.11B 50-26023 XLR Female Black/Nickel $4.00C 50-26003 XLR Male (NC3MDL-1) $6.42D 50-26004 XLR Female (NC3FDL-1) $6.58E 50-26005 1/4‰ Locking Jack NJ3FP6C $7.58F 50-26007 Isolated 50 ohm BNC Feed through $6.35G 50-26006 F-Type Feed Through $6.09H 50-26009 RCA Solder Black Band $4.47

50-26025 RCA Solder Red Band $7.3150-26026 RCA Solder White Band $3.7150-26027 RCA Solder Yellow Band $4.47

I 50-26040 CAT5E Insert Coupler $14.11J 50-26041 CAT6 Insert Coupler $14.58K 50-26042 RJ11 Insert Coupler $14.31L 50-26008 Isolated 75 ohm BNC Feed through $8.31M 10-26051 Speakon Chassis Connector $6.28N 50-26022 S-Video Feedthru Recessed $8.69O 50-26020 RCA Feedthru Recessed $8.16P 50-26012 Panel Hole Plug $2.89

MIXED CONNECTOR PATCH BAYS

PART # AWG/CONDUCTORS STRANDING DEALER PRICE30-06041-WHITE-500 16/2 65 x 34 $105.3330-06041-PURPLE-500 16/2 65 x 34 $105.3330-06042-WHITE-500 16/4 65 x 34 $132.0030-06042-PURPLE-500 16/4 65 x 34 $176.0030-06043-YELLOW-500 14/2 105 x 34 $190.6730-06044-YELLOW-500 14/4 41 x 30 $280.00

SPEAKER CABLE

• 500 ft. pull box• Oxygen-Free Copper (OFC)• UL listed NEC type CM/CL2

From critical listening to budget conscious environments,MilesTek speaker cables are available in a variety ofperformance options to fit your install needs.

Compression Base Pack includes: 4 Connectors — 10, 12, 14 & 16 AWG and 2 color rings per connector.

KEY PART NO. DESCRIPTION DEALER PRICEA 10-26060 Compression Audio Base 4 pack $6.48

10-26061 R/A Compression Audio Base 4 pack $2.37B 10-26063 Spade Tip (one each) $1.25C 10-26062 Banana Tip (one each) $1.07D 40-40350 Compression Tool for Audio Connectors $92.00

Compression Audio Connectors & Tool

A BaseB Spade

C Banana

The mixed connector patch-bays accommodate a wide selection of connector modules. including XLR, F-type, BNC, RCA, ¼”, S-video and Speakon.

D

KEY PART # DESCRIPTION DEALER PRICEA 10-26050 4 Pole Speakon® Cable Connector NL4FC $6.29B 10-26051 4 Pole Speakon® Chassis Mount NL4MP $5.03

SPEAKON® CONNECTORS

A B

• Speakon® connectors are usedas loudspeaker ampliferconnectors

• The reliable and extremelyrugged connector has a unique chuck-type strain relief.

• Cable ends have machined contacts with screw terminals.

AV DISTRIBUTION Speaker Cable, Connectors

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T54

Page 57: Milestek 2013 Winter/Spring Dealer Catalog

DS3 CONNECTORS FOR 735A AND 734AOur new DS3 Mini BNC connector was specificallydesigned for DS3 central office applications to allowa higher number of connectors/assemblies to be in-stalled in a given area. The new Mini BNC shares thesame positive attributes as our popular standardBNC, only in a smaller footprint. There is no need tore-tool as the new Mini-BNC uses exactly the sametool set as our standard BNC plug.

Depending on the brand, MilesTek BNC’s are equalto or exceed the quality of other competitors. Forexample, our BNC plug bodies are machined frombrass and then plated with bright nickel. Other inferiorbrands have cheaper die cast bodies.

The BNC connector body also incorporates a berylliumcopper wave washer to allow it to flex during matingand provide uninterruptible continuity of the shieldsignal. Teflon, the best dielectric, provides the proper75 ohm impedance and securely hold the captivecenter pin. The MilesTek BNC center pins are platedwith 30 micron inches of gold for maximum contact.

Pull strength is very important especially on smallercables such as 735A. MilesTek BNC plugs have adiamond knurling for maximum cable retention.Having tested thousands of cable assemblies,MilesTek BNC’s recorded a pull test performanceof 49.3 inch lbs. on 735A cable.

Note: *Our 40-50176 is a complete tool kit designed to work with MilesTek DS3 Connectors

10-03003-205 10-03001-205 10-03002-205

Diamond knurled formaximum pull strength

Teflon securelycaptivates pin

Machined nickelplated body

Captive center pin30 u gold plating

SAMPLES AVAILABLE!Contact MilesTek Today.800-524-7444

KEY PART # DESCRIPTION CABLE TYPE75 W CONNECTORS

A 10-03003-205 Mini BNC Crimp Plug (New Product) 735AB 10-03001-205 BNC Crimp Plug (Most Popular) 735AB 10-03001-205-BP BNC Crimp Plug (100 pk) 735AC 10-03002-205 Right Angle BNC Crimp Plug 735AD 10-03901-205 BNC Crimp Jack 735A

10-03001-204 BNC Crimp Plug 734A10-03002-204 Right Angle BNC Crimp Plug 734A

75 W MINI SMB CONNECTORS

E 10-33001-205 Mini SMB Crimp Plug 735AF 10-33002-205 Right Angle Mini SMB Plug 735A

75 W MINI WECO 440A CONNECTORS

G 10-44001-205 Mini Weco 440A Solder Plug 735A75 W TNC CONNECTORS

10-05001-205 TNC Crimp Plug 735A

10-03901-205A B C D

COAXIAL

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

For Expert Customer Service,Call Our Sales Team Today!

DS3 Connectors for 735A and 734A

55

Page 58: Milestek 2013 Winter/Spring Dealer Catalog

Tech Note: Run lengths vary in the central office. The appropriate coax cable needs to be considered so attenuation limits are not exceeded. 734 type cable is usually capable of lengths up to 450 feet,

whereas 735 type cable is capable of lengths up to 225 feet.

BULK CABLE

KEY PART # DESCRIPTION (SOLD PER FT.)A 735A-F Coax Cable 75 W, 26 AWG Silver Coated Copper Single Strand PVC

B 735A6-F Coax Cable 75 W, 26 AWG Silver Coated Copper Six Strand PVC

C 735A12-F Coax Cable 75 W, 26 AWG Silver Coated Copper Twelve Strand PVC

D 735T2C Dual Cable Coax Cable 75 W, 26 AWG Silver Coated Copper Dual Strand with Tracer PVC

735A2 Dual Cable Coax Cable 75 W, 26 AWG Silver Coated Copper Dual Strand no Tracer PVC

30-60013-WHITE CAT6 Cable 23 AWG 4 pair PVC 1000 ft.

30-50013-BLUE CAT5E Cable 24 AWG 4 pair PVC 1000 ft.Quabbin-9720R T1 Cable 22 AWG 100 W PVC 1000 ft.

DS3 TELCO Termination Kit

PART #40-50176

• Crimper with ½" die• 75 W pin crimper 12 pt.• Extra stripper cassette• Round cable cutter• Center conductor trimmer• Precision knife • Straight probe• 4 ½" flush cutter • Cable stripper• Case

A B C D

TOOLINGThe MilesTek Advantage includes the entire toolingrequirement for the correct installation of our connectors. The 40-50176 is a complete tool kitdesigned to work with MilesTek DS3 connectors.Our kit employs a ½ inch die set that completes thecrimp on the sleeve and it also contains a 12 point pincrimp tool for the center pin. Several other tools makeup the kit to assist in the installation of our connectors.

KEY PART # DESCRIPTIONE 40-13204 Connector Sleeve Crimp ToolF 40-15005 12 point Center Pin Crimp ToolG 40-11209 Strip ToolH 40-11210 Extra Blade for Strip ToolI 40-14006 BNC Removal Tool 8 inchJ 40-40001 Round Cable CutterK 40-15001 Center Conductor TrimmerL 40-40038 4½‰ Angled Flush Cutter

MilesTek stocks a wide variety of bulk cable types. The cable featured above represents the most commonused in DS3 Central Office applications. Please contact MilesTek for additional cable types.

E F

G H

I J

K L

COAXIAL DS3 Bulk Cable and Tooling

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T56

Page 59: Milestek 2013 Winter/Spring Dealer Catalog

ST/ST DUPLEXPART # SIZE27-210-001 1M27-210-002 2M27-210-003 3M27-210-005 5M

ST/SC DUPLEX SC/SC DUPLEXPART # SIZE27-510-001 1M27-510-002 2M27-510-003 3M27-510-005 5M

PART # SIZE27-310-001 1M27-310-002 2M27-310-003 3M27-310-005 5M

LC/LC DUPLEXPART # SIZE27-255-001 1M27-255-002 2M27-255-003 3M27-255-005 5M

LC/ST DUPLEXPART # SIZE27-265-001 1M27-265-002 2M27-265-003 3M27-265-005 5M

(Custom Lengths Available)

SINGLE MODE FIBER OPTICPATCH CORDS

CUSTOM CABLE ASSEMBLIESMilesTek can provide DS3 cable assemblies usingmany different connector types. Our cable assembliesare built by industry professionals and are 100% testedand guaranteed to perform. We try to keep lead timesto 24-48 hours for normal occurrences and offer sameday shipping in critical requirements.

Our in-house design engineering staff has the experience to custom design your cables, revise your current designs to optimize cost effective manufacturing or simply build to your prints. All with shorter lead times than our competition. Our manufacturing facility in Denton, Texas, isstaffed by highly-skilled technicians dedicated to producing quality products and delivering them on-time to meet your deadlines.

Do you need custom length cable assemblies?

Contact Us Today! 800-524-7444

Replace the xxx with the needed length in inches. Example: TP 1015 36 = 3 ft.

MilesTek offers “off the shelf” fiber optic patch cords. We can also custom buildfiber assemblies based on your application. Bulk fiber is available by request.

PART # ASSEMBLY DESCRIPTION 201-301-3070-xxx BNC Plug to BNC Plug 735A cable201-301-6070-xxx BNC Plug to R/A BNC Plug 735A cable201-302-7070-xxx BNC Plug to Mini WECO 440A Plug 735A cable201-301-3077-xxx BNC Plug to BNC Plug - 6 strand cable 735A201-301-6077-xxx BNC Plug to R/A BNC Plug – 6 strand cable 735A 201-301-3078-xxx BNC Plug to BNC Plug – 12 strand cable 735A201-301-6078-xxx BNC Plug to R/A BNC Plug – 12 strand cable 735A201-301-3069-xxx BNC Plug to BNC Plug 734A cable 201-301-3080-xxx BNC Plug to SMB plug 735A cable201-301-4075-xxx Mini BNC Plug to BNC Plug 735A cable201-301-4078-xxx Mini BNC Plug to Mini BNC Plug – 12 strand cable 735A201-301-4070-xxx Mini BNC Plug to Mini BNC 735A201-301-4077-xxx Mini BNC Plug to Mini BNC Plug – 6 strand cable 735A201-301-4079-xxx Mini BNC Plug to Mini BNC Plug – 2 strand cable 735A201-301-4080-xxx BNC Plug to Mini BNC Plug – 2 strand cable 735A201-401-3070-xxx BNC Plug to TNC – 2 strand cable 735A

COAXIAL

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

For Expert Customer Service,Call Our Sales Team Today!

DS3 Cable Assemblies

57

Page 60: Milestek 2013 Winter/Spring Dealer Catalog

The BNC Adapters are offered in a 75 W version.The 75 W type will operate with a digital DS3 signaltransmission. Digital signals in the telecommunicationsindustry have necessitated the usage of 75W connectorswith 75W cable. Mismatched adapters cause attenuationof the digital signal resulting in slower rise time ofsquare waves. This distortion of the signal can causetransmission errors. Also, impedance mismatchedconnections cause reflections of the signal returningto the source known as return loss. Perhaps one mismatched connection will not have a noticeable

effect on system performance, but multiple mismatchedconnections in the link between the source and destination have a cumulative effect causing possible distortion of the transmitted signal.

DS3 ADAPTERS

KEY PART # DESCRIPTION A 10-03538 BNC Bulkhead Insulated Feed-thru Jack, .505‰ D holeB 10-03900 BNC Jack-Jack AdapterC 10-03908 Right Angle BNC AdapterD 10-01002 Weco Plug to BNC Jack AdapterE 10-01066 Mini Weco Plug to BNC Jack AdapterF 10-03904 BNC "T" AdapterG 10-27023 Solder Tip PlugH 10-27046 Solderless Tip Plug

C D

E

A B

F

G H

19” WIDE RACKSMilesTek offers racks, panels,and accessories for the central office installer. Our racks and accessories are available in either19” or 23” widths. Made fromeither Steel or Aluminum ourhigh quality products and quickturnaround time make MilesTekthe perfect choice to completeyour project.

PART # DESCRIPTION 50-70101 19" Aluminum Rack - 2 Post50-70304 19" Black Alum Rack - 2 Post50-70121 19" Center Mount Shelf - 17.5‰ Deep50-70120 19" Cantilever Shelf - 17.5‰ Deep50-70432 19" 9 Outlet Power Strip 15A50-99004 12/24 Screws 100 pack

Note: MilesTek also offers a full line of 23‰ racks and shelves.

50 70101

MILESTEK DS3 TRAINING AVAILABLEMilesTek has been a manufacturer for the DS3 market forover 25 years. We offer superior customer service along withstock of our MilesTek connectors, tooling and accessories.To assist with MilesTekÊs DS3 high quality of connectorsand customer service; we are proud to introduce our BNCtraining course.

Our DS3 BNC connector training course is intended toteach the fundamentals of terminating cable assemblies.The course will outline the features of our BNC design andtooling. It also provides the installer step by step instructionsfor a dependable installation.

We can customize each training session to meet with yourcompanyÊs application to make certain your installers areprovided with the knowledge of cable impedance matching,cable preparation procedures and the ability to choose theproper tools for each job.

At the completion of the course each installer will be providedtraining materials and a certificate of completion.

COAXIAL DS3 Adapters and Test Kits

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T58

Page 61: Milestek 2013 Winter/Spring Dealer Catalog

PART # DESCRIPTION 50-21026 19" BSP 1 x 16 - Empty50-21025 19" BSP 1 x 16 - 75 W Jacks50-21029 19" BSPD 1 x 16 - 75 W Jacks50-21004 19" BSP 2 x 16 - Empty50-21009 19" BSP 2 x 16 - 75 W Jacks

BNC BULKHEAD JACKS/PANELSBNC bulkhead isolated jacks are available in 50W and 75W versions.The 50W type is sufficiant for analog video. Although designed for digitalvideo, the 75W type will operate with analog video. Panels are made of16 gauge steel with rolled edges for rigidly and are painted black. Theyhave 0.505” diameter “D” holes to mount bulkhead isolated jacks.Model BSP are without designated strips. Model BDPD have two 0.70”wide designation strips. BNC jacks in the distribution panels are either10-02538 (50W) or 10-03538 (75W). Panel widths are 19” or 23” (withoutdesignated strips). All panels are 3.5” high except the 1x16 panels,which are 1.75” high.

CROSS REFERENCE TABLEMILESTEK PART# DESCRIPTION CABLE TYPE TROMPETER PART# ADC PART# KINGS PART#10-03003-205 Mini BNC Plug 735 UPL250-026 · ·

10-03001-205 BNC Plug 735 UPL220-026 BNC-3-N 2025-44-9

10-03001-205-BP BNC Plug-100 pk. 735 UPL220-026/T50 BNC-3B-N ·

10-03002-205 Right Angle BNC Plug 735 UPLR220-026 BNC-RA-3 2026-17-9

10-03901-205 BNC Jack 735 UCJ220-026 · ·

10-03003-204 Mini BNC Plug 734 UPL250-025 · ·

10-03001-204 BNC Plug 734 UPL220-025 BNC-1-N 2025-76-9

10-03002-204 Right Angle BNC Plug 734 UPLR220-025 BNC-RA-1 2026-16-9

10-03901-204 BNC jack 734 UCJ220-025 · ·

10-03001-217 BNC Plug YR23023 UPL220-009 BNC-7 ·

10-03001-217-BP BNC Plug-100 pk. YR23023 UPL220-009 BNC-7B ·

10-05001-205 TNC Plug 735 UPL240-026 · ·

10-33001-205 Mini SMB Plug 735 · · ·

10-33002-205 Right Angle Mini SMB Type 735 · · ·

10-03205-205 Splice connector 735/735 735 UCCS-026-026 · 3050-11-9

10-03204-205 Splice connector 734/735 734/735 UCCS-025-026 · 3050-10-9

10-03204-204 Splice connector 734/734 734 UCCS-025-025 · 3050-12-9

10-44001-205 Mini Weco 440A Plug 735 PL11C-026 · 7410-9

10-03538 BNC Bulkhead Jack-Jack Insulated · UBJ28 BHFT1 2029-9-9

10 03900 BNC Jack-Jack Adapter · UAD28 BNC-STRT-ADPT 2029-15-9

10-03908 Right Angle BNC Jack-Plug Adapter · UADRMF220 BNC-RA-ADP 2029-20-9

10-03904 BNC "T" Adapter · UBN23 · 2029-16-9

10-01002 WECO Plug to BNC Jack Adapter · AD1W · ·

10-01066 Mini WECO 440A to BNC Jack Adapter · ADMW12 · ·

PART # DESCRIPTION 50-21012 19" BSPD 2 x 16 - Empty50-21014 19" BSPD 2 x 16 - 75 W Jacks50-21015 19" BSP 2 x 12 - Empty50-21017 19" BSP 2 x 12 - 75 W Jacks50-21018 19" BSPD 2 x 12 - Empty

PART # DESCRIPTION 50-21020 19" BSPD 2 x 12 - 75 W Jacks50-25002 --------23" BSP 2 x 24 - Empty50-25001 23" BSP 2 x 24 - 75 W Jacks50-99001 Panel Screw 10 x 32 x ¾ 50-99002 Panel Screw 10 x 32 x ¾ - 100 Pack

COAXIAL

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

For Expert Customer Service,Call Our Sales Team Today!

DS3 Panel Assemblies and Racks

59

Page 62: Milestek 2013 Winter/Spring Dealer Catalog

BNC Crimp Plugs, 50 Ohm - Analog Video, EthernetTraditional NTSC Baseband Analog Video

Tek Note: BNC Plug Key Chart(1) Use center pin crimper 40-15002 for all Milestek

75 W BNC plugs.(2) Use 40-11209 Corex Cable Stripper for specified cable types.(3) Use 0.068‰ die cavity & 40 12001 to crimp the center pin on all

Milestek 50 W BNC plugs.(4) May be crimped with either 3/8‰ or 1/2‰ crimp die.

Cable strip dimensions applies to ALL 75 W BNC plugs, 50 W BNC plugs.0.327‰ (braid) • 0.146‰ (dielectric) • 0.158‰ (center conductor)

PART # CABLE TYPECRIMP SLEEVE DEALER PRICE

10-03001-204 RG59 20AWG, 1505A, 30 01003,30 01004, 30 01005, 30 01006

Hex 0.255 $3.00

10-03001-217 8218/VFM809, 1855A, 1856A Hex 0.178 $3.0010-03001-215 RG179, 1520A, 1522A Hex 0.178 $3.0010-03001-237 30 01031, 1694A, 1695A Hex 0.324 $3.0010-03001-203 8281 Hex 0.324 $3.0010-03001-202 8241, RG59 23 AWG Hex 0.255 $3.00

PART # CABLE TYPECRIMP SLEEVE DEALER PRICE

10-02001-202 RG59/U (solid) 23 AWG 8241 Hex 0.255 $3.0010-02001-203 8281 Hex 0.324 $3.0010-02001-233 RG58A C/U, RG 223, 9907 Hex 0.213 $3.0010-02001-201 RG58/U (solid), 8240 Hex 0.213 $3.00

50 W vs. 75 W BNCTraditional 50 W BNC connectors that are installed on 75W coaxial videocable cause digital signal distortion which results in digital transmissionerrors. The mechanical differences between the two types of connectorsare the dielectric insulators and center pins. The 75W connector employsTeflon as a dielectric and air around its outer spring fingers as comparedto Delrin surrounding the spring fingers of the 50W type. Also the 75W

connector's center pin has the same diameter in the front and rear areaswhere the pin is crimped to the cable's center conductor; the 50W

connector's pin has a larger diameter in the crimp area. Therefore, different crimp tools are required for two types of center pins.

However, both types on connectors mate mechanically without physicaldamage. Nevertheless, the 50W connector is adequate for analog video applications.

A B C D

E F G H

I J K L

BNC AdaptersBNC Adapters are offered in 50 W and 75 W versions. The 50 W type issufficient for analog video. Although designed for digital video, the75 W type will also operate with analog video.

M

KEY PART # BNC ADAPTERS DESCRIPTION DEALER PRICEA 10-02904 50 W BNC „T‰ F/M/F $4.00

10-02946 50 W BNC „T‰ F/F/F $0.90B 10-03946 75 W BNC „T‰ F/F/F $4.55C 10-02914 50 W BNC Goal Post M/F/F $3.31D 10-03914 75 W BNC Goal Post M/F/F $3.00E 10-03900 75 W BNC Barrel F/F $3.95F 10-02947 50 W BNC Barrel M/M $0.80G 10-03947 75 W BNC Barrel M/M $3.30H 10-03908 75 W BNC Right Angle M/F $8.00I 10-01002 Weco Male (.090) to BNC Female $11.95J 10-01066 Mini-Weco Male to BNC Female $13.50K 10-02406-009 BNC 50 W Terminator 1 % 0.5W Resistor $0.84L 10-02406-010 BNC 75 W Terminator, 1% 0.5W Resistor

Analog Applications$1.95

M 10-03406-029 BNC 75 WTerminator, 0.1% 0.5W Resistor Digital Applications

$2.25

BNC Crimp Plugs, 75 Ohm - Broadcast Digital VideoHigh frequency HDTV serial digital video. Three piece crimp plug with captive center contact.

MILESTEK BNC ELECTRICAL SPECIFICATIONS:• Frequency Range: Tested to 3 GHz• Working Voltage: 500 VRMS• Dielectric Withstanding Voltage: 1500 VRMS• VSWR: 1.05 + 0.1f (GHz) DC to 1 GHz• Contact Resistance: Center Contact 1.5 milliohms, Outer Contact 1.0 milliohms• Insulation Resistance: 5000 megohms (min.)

Tech Note: (1) (2) (4)Use BNC Plug Key Chart below.

Tech Note: (2) (3) (4)Use BNC Plug Key Chart below.

COAXIAL BNC Connectors & Adapters

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T60

Page 63: Milestek 2013 Winter/Spring Dealer Catalog

75 Ohm Pin Crimpers

The Center Conductor Trimmer automatically cuts the coaxial center conductor to the proper length for MilesTek BNC plugs.

Center Conductor Trimmer

PART # DESCRIPTION DEALER PRICE40-15001 Center Conductor Trimmer $6.09

The 40-15002 precision tool crimps 75W BNC plug center pins. It has 4-way crimping dies per MS22520, full cycle ratchet, built-in pin locator and comfort grips.

PART # DESCRIPTION DEALER PRICE40-15002 For Digital Video BNCs $85.0040-15005 For Telco BNCs $95.00

MilesTek Universal CrimperUniversal Crimper Die SetsUse with MilesTek 3-piece BNC Crimp plugs.

PART # FRAME & DIE DEALER PRICE40-12100 RG58/59/62 $29.8740-12101 RG59/8281 $25.3840-12115 RG179/8281 $26.79

PART # DESCRIPTION DEALER PRICE40-12002 RG58/59/62 Die Set: Hex size 0.255/0.213/0.068 $12.2940-12003 RG59/8281 Die Set: Hex 0.324/0.255/0.068 $12.2940-12015 RG179/8281 Die Set: Hex 0.324/0.178/0.068 $12.29

Is the quality of MilesTek BNC's the same as other brands?Depending on the brand, MilesTek BNC's are equal to or exceedthe quality of other competitors. For example, the MilesTek BNCplug bodies are machined from virgin brass in accordance withMIL-C39012 and then plated with bright nickel. Many other lessexpensive brands have cheaper die cast bodies. Furthermore, theMilesTek BNC body incorporates a beryllium copper wave washerto allow the BNC to flex during mating and to provide firm uninterruptible continuity of the shield signal. Teflon, the best dielectric, provides the proper dielectric for 75Ω impedance andsecurely holds the captive center pin.

How is your BNC center pin different than some other brands?In order to be true 75Ω impedance, the center pin has the same diameter in the crimp area as the mating area. Our captive BNC pinsare plated with 30 µ” of gold in accordance with MIL-G-45204.

More than 30 µ” is unnecessary for normal use. Some competitivebrands have a 75Ω body with 50Ω center pin to eliminate the necessityof a separate center pin crimper. If tested, the connector with 50Ω pinand 75Ω body produces an impedance of approximately 68Ω .

Should the BNC body have enclosed beryllium copper spring fingers?One manufacturer promotes this idea. Unless the BNC is subject toabuse such as thousands of matings and foreign objects poking intothe interface of the connector, this design is unnecessary.

What about cable pull strength?Pull strength is important on small diameter cables such as 735A.MilesTek BNC plugs have diamond knurling for maximum cableretention. Out of 3,000 to 4,000 coaxial cable assemblies,MilesTek's BNC's for 735A recorded pull test performance of 49.3 Ibs. The minimum specification is 30 Ibs.

MILESTEK BNC FAQS

The Clothespin Stripper (CP) prepares RG58, RG59 andRG6/8281. The cassette cutting dimensions are in parentheses. Specifically-designed for MilesTek BNC plugs.

Corex II Coax Stripper

PART # DESCRIPTION DEALER PRICE40-11209 Corex (0.327/0.146) $72.0040-11210 Corex Cassette (0.327/0.146) $25.00

The Corex II Stripper prepares coax cables with diameters from 0.100” to 0.305” Includes four color-coded V-blocks for different cable sizes and hex wrench. The 3-blade black cassette with strip dimensions of 0.327/0.146 is specifically designed for MilesTek BNC plugs.

Clothespin Stripper

PART # DESCRIPTION DEALER PRICE40-11310 CP 3-Bl. (0.327/0.146) $11.6040-11311 CP 3-Bl. Cassette (0.327/0.146) $3.57

shown as 40-12100

• Universal crimper frame with RG58/59 and RG179/8281 crimp dies

• Corex Cable stripper w/extra cassette• Center conductor trimmer • 75ohm pin crimper• Round cable cutter • BNC removal tool

Universal BNC Termination Kit

PART # DEALER PRICE40-50220 $240.00

COAXIAL

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

For Expert Customer Service,Call Our Sales Team Today!

BNC Tools

61

Page 64: Milestek 2013 Winter/Spring Dealer Catalog

KEY PART # DESCRIPTION DEALER PRICEA 10-16013-202 F-Plug RG59 Crimp $0.30A 10-16013-224 F-Plug RG6 Crimp $0.30B 10-16041-202 F-Plug RG59 Universal Crimp $0.58B 10-16041-224 F-Plug RG6 Universal Crimp $0.61C 10-16908 F-Plug-Jack R/A Adapter $0.65D 10-16935 F-Push-On Plug/F Jack $0.55E 10-16410-002 F-Plug Terminator 75 W $0.13F 10-16049 F-81 Bulkhead J/J w/Hardware $0.15G 10-16047 F-81 Bulkhead J/J w/Hardware $0.58H 10-16044 Single F Grounding Block $0.42

F-Type Connectors & Adapters

A B C

D

F-TYPE CONNECTORS

F-Type Cables

RG59 CATV Cables RG6 CATV Cables

F-type cords have molded cable ends. Both cable and satellite can be run through RG6 F-type cords. Custom Cable lengths available.

The F-plug installation kit has acrimper, 2-step coax cable stripper,round cable, flush cutter, two F-pluginstallation tools for RG59 and RG6,a blow molded case and instructions.CATV crimper frame/die terminatesF-plugs for RG59 andRG6 both regular andquad shield connectors.

F-Plug Installation KitVideo RFSplitters

PART # SIZE DEALER PRICE33-100-36 3 ft. $0.9833-100-72 6 ft. $1.2033-100-144 12 ft. $1.7633-100-300 25 ft. $2.78

PART # SIZE DEALER PRICE33-300-36 3 ft. $2.4433-300-72 6 ft. $1.4433-300-144 12 ft. $2.2033-300-300 25 ft. $3.84

I J K L M

PART # DESCRIPTION DEALER PRICE40-50223 CATV Kit $52.0540-12116 CATV Crimper only $19.13

KEY PART # DESCRIPTION DEALER PRICEI 90-10112 2-Way 5-900 MHz Gold $1.78J 90-10113 3-Way 5-900 MHz Gold $2.27K 90-10114 4-Way 5-900 MHz Gold $2.51L 90-10115 6-Way 5-900 MHz $4.02M 90-10116 8-Way 5-900 MHz $4.40N 90-10117 2-Way 2 GHz Satellite $1.60O 90-10118 4-Way 2 GHz Satellite $4.49 O

N

RG6 Dual Shield CATVCMR Rated • Spool Box

RG6 Quad Shield CATVCMR Rated • Spool Box

PART # AWG CONDUCTOR COLOR PUT-UP DEALER PRICE30-01041-WHITE 18 CCS White 1000 ft. $71.6730-01041-BLACK 18 CCS Black 1000 ft. $73.1730-01042-WHITE 18 CCS White 500 ft. $40.0030-01042-BLACK 18 CCS Black 500 ft. $38.33

PART # AWG CONDUCTOR COLOR PUT-UP DEALER PRICE30-01043-WHITE 18 CCS White 1000 ft. $90.0030-01043-BLACK 18 CCS Black 1000 ft. $90.00

RG59 with Siamese Power 18/2 CCTVCMR Rated • Spool Box

RG59 CCTV CMR Rated • Spool BoxPART # AWG CONDUCTOR COLOR PUT-UP DEALER PRICE30-01046-WHITE 20 Solid BC White 1000 ft. $113.3330-01046-BLACK 20 Solid BC Black 1000 ft. $115.00

PART # AWG/CONDUCTORS CONDUCTOR COLOR PUT-UP DEALER PRICE30-01047-WHITE RG59 + 18/2 Solid BC White 500 ft. $123.3330-01047-BLACK RG59 + 18/2 Solid BC Black 500 ft. $118.33

F G H

E

PART # DESCRIPTION DEALER PRICE60-10801 MilesTek Single F CATV Wallplate White $0.5360-06801 MilesTek Single F CATV Wallplate Ivory $0.5360-10802 MilesTek Dual F CATV Wallplate White $0.8760-06802 MilesTek Dual F CATV Wallplate Ivory $0.87

F-Type CATV Wallplates

COAXIAL Coax Cable, F-Connectors

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T62

Page 65: Milestek 2013 Winter/Spring Dealer Catalog

A full line of compression connectorsspecifically designed for ease of installa-tion, the F-Conn system is the fastest wayto terminate cable. Available for RG59and RG6 cable, the new F-Conn universalconnectors support both standard andquad-shield cable.Connector Features and Benefits:

• 80-pound pull strength between connectorand cable

• Radial design provides 360 degree electricalcontinuity

• Internal “O” sealing rings prevent moisturemigration

• Large ferrule surface insure’s proper RF andDigital interface

MilesTek Basic Coax Stripper

Preset coaxial cable stripping tool - This stripper quickly and simply strips RG59 and RG6 coaxial cables for MilesTek compression type connectors.

for Compression Connectors (RG59, RG6 coax)

F-Conn Compression Toolfor Compression Connectors• Rugged, light weight:

accommodates full-line of compression connectors

• Ratcheting handle doesn't releaseuntil connector is fully terminated

MilesTek Coax Stripper

• One Stripper does it all! • Perfectly strips RG59,

RG6, Mini 23-26 AWG RGB Coax • Strips all appropriate cable types

without changing out cartridge

for Compression Connectors(RG59, RG6, Mini RGB Coax)

KEY PART# CONNECTOR DEALER PRICEA 40-40350 F-Conn Compression Tool $92.00B 40-11412 MilesTek Coax Stripper $24.00C 40-40396 MilesTek Basic Coax Stripper $19.63

A

B

C

Perfect for utilizing new or existing runs of RG6 CATV/broadbandcoax to upgrade analog video systems to fully digital platforms.Using a single RG6 coax, this device extends high definition HDMI1.3 compliant devices up to 400 ft (120 M) and supports up to1080P. Unique system allows signals from 2 input sources totransmit to 1 remote display. Cascade port is available on bothtransmitter and receiver, allowing signal expansion to multiple remotereceivers. This starter kit package includes transmitter, receiver andremote control for switching between inputs. Additional receiverunits, part # 90-12025, are sold separately.

HDMI over Single RG6/SDI Coax

• Extends high definition HDMI compliant devices up to400 ft. (120 m) over 75 Ohm RG6 Dual or Quad Shield

• Supports resolution up to 1080P. • Works with HDMI 1.3 and HDCP compliant devices.• Consumer Electronics Control (CEC).• Supports xvYCC function.• Extends range of HDMI by equalizing signals.

PART # DESCRIPTION DEALER PRICE90-12024 HDMI over Single RG6 Coax $286.8990-12025 Receiver-Only for Cascading $169.61

• Easy to install and simple to use.• Video amplifier speed: 10.2 Gbps.• Video amplifier bandwidth: 340MHz.• Up to 36bit color depth.

PART # CONNECTORS (5 PACK) DEALER PRICE10-16020-202 RG59 F $2.0710-16020-224 RG6 F $2.2010-21002-240 RG59 RCA $5.8010-21002-237 RG6 RCA $6.0710-03100-240 RG59 BNC $10.5310-03100-237 RG6 BNC $10.53

PART # 100 PIECE BULK PACKS DEALER PRICE10-16020-202-BP RG59 F $40.0010-16020-224-BP RG6 F $46.6710-21002-240-BP RG59 RCA $116.0010-21002-237-BP RG6 RCA $121.3310-03100-240-BP RG59 BNC $202.6710-03100-237-BP RG6 BNC $210.67

F-Conn RG59 & RG6 Compression Connectors

COAXIAL

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

For Expert Customer Service,Call Our Sales Team Today!

Compression Connectors

63

Page 66: Milestek 2013 Winter/Spring Dealer Catalog

26” USEABLE DEPTH 20” USEABLEDEPTH

SLIM 5 SERIES EQUIPMENT RACK ENCLOSURESpecify a Slim 5 when multiple racks need to be joined or when open sides aredesirable. Ships ready-to-assemble to reduce shipping costs.Structural Featuresv

• Available in 20” and 26” useable depths• Weight Capacity:

• Static load capacity, 1,000 lbs.• UL Listed load capacity, 400 lbs.

• Wide range of cabinet options makes rack adaptable to a multitude of different installation environments

• Optional removable steel side panels provide security while attractivethermolaminate top and side panel options provide aesthetic appeal forhome and studio installations

• Heavy-duty 14-gauge steel top and bottom contribute tounsurpassed rigidity of rack design

• Standard front and rear fixed 11-gauge, 10-32 threaded rackrail withmarked rackspace increments to speed equipment mounting

• Optional casters can be bolted directly to bottom of rack or concealed inskirted base

• Unique mechanically interlocking corner joint is central to each unit’sexceptional strength and eases assembly

• Bolt-together design allows for flat shipment via UPS• 2” and w” top and bottom electrical knockouts in rear of rack for

cable pass-through• NEW top accepts two fans• UL Listed in the US and Canada

MILESTEKPART #

MAPART #

DEALERPRICE

MILESTEKPART #

MAPART #

DEALERPRICE RACKING HEIGHT

OVERALLHEIGHT

WEIGHTCAPACITY

50-70441 5-43 $267.99 50-70440 5-43-26 $304.11 75¼” (43 space) 79‰ 400 lbs.

50-70442 5-37 $256.78 50-70437 5-37-26 $292.88 64¾” (37 space) 68½‰ 400 lbs.

50-70443 5-29 $244.74 50-70295 5-29-26 $280.85 50¾” (29 space) 54½‰ 400 lbs.

50-70444 5-21 $222.28 50-70435 5-21-26 $258.36 36¾” (21 space) 40½‰ 400 lbs.

50-70445 5-14 $197.40 50-70434 5-14-26 $233.50 24½” (14 space) 28¼‰ 400 lbs.

50-70446 5-8 $173.31 50-70438 5-8-26 $210.28 14” (8 space) 17¾‰ 400 lbs.

uniquemechanicallyinterlockingcorner jointprovidessuperiorstrength

ENHANCED! top knockouts for fans

aesthetically pleasing silveror black anodizedtrim panels available

ENHANCED!additionalcable tie points

20‰ or 26‰

191/8‰5-29

shown with darkcherry side and top panels and plexi-glass front door

26‰ deep Slim 5 shownwith granite gray steel side panels

Lacer Bars availablefor enhanced cablemanagement.

PART# SH-5A

Zero Space Rackshelf

zero space full depth front and rear mount SH Series rackshelf

Thermolaminate Side and Top Colors Available:

dark cherry

honeymaple

lightwalnut

pepperstone(with slate sides)

Steel Side Panel Colors Available:

black granite gray

RACKS & ACCESSORIES Racks & Enclosures

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T64

Page 67: Milestek 2013 Winter/Spring Dealer Catalog

SLIM 5 SERIES EQUIPMENT RACK ENCLOSURE OPTIONS

PART # FINISH5-CAVTRIM silver brushed and anodized5-BAVTRIM black brushed and anodized

casters add 37/8‰ to overall cabinet height

5Wset of 4

commercial grade casters

Top and side panels are constructedfrom thermolaminated MDF. Will notwork when using split rear rackrail op-tions.

WUSS and SH Series shelves need tobe installed prior to installation of woodside panels, which conveniently lift off.

Removable Steel Side Panels are ventedtop and bottom with recessed lift handlesand internal locking clips.

Made from 18-gauge steel and finished in adurable black textured powder coat, eachside panel adds s‰ per side to overall enclo-sure width. Side panels for 26‰ deep Slim 5also available with granite gray finish.

Doors are capable of being installedwith a right or left swing and areequipped with a cam keylock andattractive flush handle.

Requires the use of a cable chasewhen used in multi-bay installations.Doors provide 12‰ clearance.

Rear access pans feature a uniqueno-hinge „tip-out lift-off‰ design with alaser knockout for cable pass-throughon the bottom.

Securing keylock included.

5WRset of 4fine floorcasters

5WLset of 4

commercial grade locking

casters

5WLRset of 4

locking finefloor casters

CBS-5skirted base with 4 commercialgrade non-locking casters,fits 20‰ depth models;

CBS-5-26 fits 26‰ depth models

CBS-5Rskirted base with 4 fine floor

non-locking casters,fits 20‰ depth models;

CBS-5-26R fits 26‰ depth models

POWER DISTRIBUTION AND LIGHTING

Installation and Ordering Notes

vertical and rackmount powerand lighting available,please see pgs. 64-79

TRIM PANELS

top and bottom trim panels available tomatch the finish of the products mountedwithin the enclosure, includes 2 pieces

5AR37installedon 5-37

•Suffix part number with GY for granite gray finish. *Custom width cable chases available, please call for details. **Replace ÂxxÊ with DC=Dark Cherry, MP=Maple,LW=Light Walnut or PS=Pepperstone top (slate sides)

ADJUSTABLE “SPLIT” REAR RACKRAIL

• Facilitates rear hanging of equipment Permits panels to be „mid-mounted‰

• All brackets, rails and hardware included• Cable chase kit required when using thisoption with ganged enclosures

• Works with steel side panels only; will not accommodate wood side panels

RACKPART #

SOLIDFRONT DOOR

PLEXIFRONT DOOR

5-43 DO-5-43 DOP-5-435-37 DO-5-37 DOP-5-375-29 DO-5-29 DOP-5-29 5-21 DO-5-21 DOP-5-215-14 DO-5-14 DOP-5-145-8 DO-5-8 DOP-5-8 5-43-26 DO-5-43 DOP-5-435-37-26 DO-5-37 DOP-5-375-29-26 DO-5-29 DOP-5-295-21-26 DO-5-21 DOP-5-215-14-26 DO-5-14 DOP-5-145-8-26 DO-5-8 DOP-5-8

STEEL SIDE PANELS,PAIR

TOP AND SIDEPANELS**

REAR ACCESSPANEL

ADJUSTABLE “SPLIT”REAR RACKRAIL

CABLE CHASE3”WIDE*

SP-5-43 TSP-5-43xx RAP43 5AR43 5CC43SP-5-37 TSP-5-37xx RAP37 5AR37 5CC37SP-5-29 TSP-5-29xx RAP29 5AR29 5CC29 SP-5-21 TSP-5-21xx RAP21 5AR21 5CC21SP-5-14 TSP-5-14xx RAP14 5AR14 5CC14SP-5-8 – RAP8 5AR8 5CC8 SP-5-43-26• TSP-5-43-26xx RAP43 5AR43-26 5CC43-26SP-5-37-26• TSP-5-37-26xx RAP37 5AR37-26 5CC37-26SP-5-29-26• TSP-5-29-26xx RAP29 5AR29-26 5CC29-26SP-5-21-26• TSP-5-21-26xx RAP21 5AR21-26 5CC21-26SP-5-14-26• TSP-5-14-26xx RAP14 5AR14-26 5CC14-26SP-5-8-26• – RAP8 5AR8-26 5CC8-26

without trim strip installed with trim strip installed

add the finishing touch to any installation

Door Options, Side Panels, Rear Access Pans, Rear Rackrail

Dimensions Trim StripsCable Chase Top View

custom widths available3.00‰

low-friction runner allows theSlim 5 to easily slide in and outof credenzas and lecterns

Runner Kit

PART # FITS5-RS20 20‰ deep models5-RS26 26‰ deep models

RACKS & ACCESSORIES

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

For Expert Customer Service,Call Our Sales Team Today!

Racks & Enclosures

65

Page 68: Milestek 2013 Winter/Spring Dealer Catalog

ERK SERIES STAND-ALONE/GANGABLE RACK ENCLOSURESAggressively Priced Stand-Alone Rack with Ganging Capabilities

Specify an ERK when economy is required and solid sides are preferable. Provides unparalleled quality at an aggressive price. Structural Features

• Fully welded construction, combined with 16-gauge steel tops,bottoms, and sides, provides a 2,500 lb. weight capacity

• Standard front adjustable 11-gauge, 10-32 threaded rackrail withnumbered rackspace increments to speed equipment mounting

• Finished in a durable black textured powder coatThermal Management

• Front and side ventilation locations optimize convection• Configurable open tops on all 44, 40 and 35 space ERKs accept a

number of options for thermal management while 27, 21 and 18space models feature a solid top with 2 laser knockouts that ac-cept 4-1/2" fans

• Standard solid rear doors are configurable and accept a number ofoptions for thermal management

Cable Management• 1/2”, 3/4”, 1”and 1-1/2” electrical knockouts found on removable

split rear plates, top knockout plate additionally includes UHF/VHFantenna knockouts

• Multiple lacing points and slotted rail brackets add cable management convenience to ERKs

• Removable split rear plates allow cable bundles to be easilypassed over or under the ERK’s standard key-locking rear door

Code Compliancy• Seismic Certified to the 1997 UBC and 2001 CBC Seismic Zone

4 and the 2000 IBC, 2003 IBC, 2002 ASCE Standard 7 and 2003NFPA 5000 Seismic Use Group III lateral force requirements forprotecting 600 lbs. of essential equipment in upper floor installationswhen used with optional ERK-Z4 seismic floor anchor brackets(see pg. 32) with an Ip value of 1.5

• Stud in the base of rack facilitates proper grounding and bonding of electronic equipment, as per NEBS and NEC standards

• UL Listed in the US and Canada

numberedrackspaceincrementsspeed equipmentmounting

ganging holes(laser knockouts)

configurable opentop on 44, 40 and35 space models

standard lockingrear doorincorporates springloaded latch to keepdoor closedwithout key

ERK-4425

fully adjustablefront rackrail

rail brackets are pre-punched for built-incable management

20‰ or25‰

22‰

MILESTEKPART #

MAPART #

DEALERPRICE

MILESTEKPART #

MAPART #

DEALERPRICE

RACKINGHEIGHT

OVERALLHEIGHT

50-70554-44 ERK-4420* $486.66 50-70354-44 ERK-4425* $526.38 77‰ (44 space) 81 1/8‰

50-70554-40 ERK-4020* $458.96 50-70354-40 ERK-4025* $483.55 70‰ (40 space) 74 1/8‰

50-70554-35 ERK-3520* $409.23 50-70354-35 ERK-3525* $455.83 61 ¼‰ (35 space) 65 3/8‰

50-70554-27 ERK-2720* $375.51 50-70354-27 ERK-2725* $407.50 47 ½‰ (27 space) 51 3/8‰

50-70554-21 ERK-2120* $353.24 50-70354-21 ERK-2125* $386.70 36 ¾‰ (21 space) 40 7/8‰

50-70554-18 ERK-1820* $332.21 50-70354-18 ERK-1825* $365.90 31 ½‰ (18 space) 35 5/8‰

AXS slide outsystem is com-patible in ERKrack.

standard solidrear doors areconfigurablefor enhancedthermalmanagement,(27 to 44space ERKsonly)

*available without rear door,suffix part # with ÂLRDÊ.

ERKs feature 4‰ laser EKOs on sides, providing cable pass-through and gangingholes, allowing the ERK to be used in amulti-bay configuration without drilling (44, 40, 35 space models only), use GK4 4‰ganging grommet kit to protect cables

20” OUTSIDE DEPTH(18 15/32” USEABLE)

25” OUTSIDE DEPTH(23 15/32” USEABLE)

RACKS & ACCESSORIES Racks & Enclosures

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T66

Page 69: Milestek 2013 Winter/Spring Dealer Catalog

ERK SERIES STAND-ALONE/GANGABLE RACK ENCLOSURE OPTIONS

2 standardball bearingfans

optional thermostaticfan control

accommodatesdeeper DVRs

Fan Kitw/ 2 fans,190 CFM

VentPanelKit

FilterKit

BlankPanelKit

KO-AWFP2 KO-VT3 KO-FILTER3 KO-WSB3

vented reardoor, for ERKs or-dered without reardoor

700 lb. weightcapacity

1,300 lb. weightcapacity

Top Options (44, 40, 35 space models)

ERK-STsolid

ERK-VTvented

ERK-4FTmounts three 42‰ fans

NEW ERK-4FT-285CFMwith fans

ERK-4QFT-FCwith quiet fans + control

ERK-10FTmounts one 10‰ fan

NEW ERK-10FT-550CFMwith fan

ERK-10FT-FCwith fan + control

ERK-6FTmounts two 6‰ fans

NEW ERK-6FT 440CFMwith fans

ISO-KOPtop or bottom mount Electrical Isolation KnockoutPanel features non-conductive EKOs to isolateelectrical conduit from the rack, see pg. 33

RACKPART #

ADD’L 10-32THREADED RACKRAIL

COMMERCIAL GRADECASTER BASES

FINE FLOORCASTER BASE

ERK-4420 ERK-RR44 CBS-ERK-20 CBS-ERK-20RERK-4020 ERK-RR40 CBS-ERK-20 CBS-ERK-20RERK-3520 ERK-RR35 CBS-ERK-20 CBS-ERK-20RERK-2720 ERK-RR27 CBS-ERK-20 CBS-ERK-20RERK-2120 ERK-RR21 CBS-ERK-20 CBS-ERK-20RERK-1820 ERK-RR18 CBS-ERK-20 CBS-ERK-20RERK-4425 ERK-RR44 CBS-ERK-25 CBS-ERK-25RERK-4025 ERK-RR40 CBS-ERK-25 CBS-ERK-25RERK-3525 ERK-RR35 CBS-ERK-25 CBS-ERK-25RERK-2725 ERK-RR27 CBS-ERK-25 CBS-ERK-25RERK-2125 ERK-RR21 CBS-ERK-25 CBS-ERK-25RERK-1825 ERK-RR18 CBS-ERK-25 CBS-ERK-25R

ELECTRICAL ISOLATION KNOCKOUT PANEL

VBKvent blockers available for

Active thermal management,see pg. 115

VENT BLOCKER

REAR DOOR KNOCKOUT PANEL OPTIONS

REAR DOOR

VENTED

ERK-VRD-44ERK-VRD-40ERK-VRD-35ERK-VRD-27ERK-VRD-21ERK-VRD-18

standard solid rear doors are configurablefor enhanced thermal management

POWER DISTRIBUTION & LIGHTING

vertical and rackmount power andlighting available

please see pgs. 94-107

VERTICAL LACER STRIPS

LACE-44LP44 space 32‰wide lacer strip,sold in pack

of 6

LACE-P45 space 2‰ wide

lacer strip, sold in packsof 6

see pg. 91

LACE-40-OP40 space

34‰ wide lacerstrip, sold inpacks of 6

COPPER BUSS BARS

BB-4040 space2‰ widecopperbuss bar

BB-44-144 space1‰ widecopperbuss bar

GK-4G

GROMMETS

NEW GK-4Ggland grommet.Hugs cables toreduce dust andcontrol airflowwithin an enclosure,soldin packs of 4.Standard GK4ganging grommetalso available.GK4

RACKPART #

FRONT DOORS

SOLID PLEXI REGULAR PERF VENTED LARGE PERF VENTED PLEXI VENTED

ERK-44xx FD-44 PFD-44 VFD-44 LVFD-44 PVFD-44 ERK-40xx FD-40 PFD-40 VFD-40 LVFD-40 – ERK-35xx FD-35 PFD-35 VFD-35 LVFD-35 – ERK-27xx FD-27 PFD-27 VFD-27 – – ERK-21xx FD-21 PFD-21 VFD-21 LVFD-21 – ERK-18xx FD-18 PFD-18 VFD-18 LVFD-18 –

Door Options

ADDITIONAL RAIL, CASTER BASES

RACKS & ACCESSORIES

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

For Expert Customer Service,Call Our Sales Team Today!

Racks & Enclosures

67

Page 70: Milestek 2013 Winter/Spring Dealer Catalog

WRP/WRS Series Low-Profile Wall CabinetsSpecify a WRP or WRS when vertically wall mounting deep eqiupmentStructural Features

• Unique design with 23” useable racking depth allows mounting of deeperequipment vertically in a parallel-to-the-wall orientation for space effi-ciency and aesthetics

• Standard adjustable 11-gauge, 10-32 threaded rackrail• Solid hinged body swings either left or right• Angled, hinged plexiglass (WRP Series) or solid steel (WRS Series) top

cover allows convenient equipment access• Top cover keyed separately from body keylock, providing user access to

equipment controls while limiting access to rear equipment connections• Finished in a durable putty powder coat (WRP Series) or black textured

powder coat (WRS Series) powder coatThermal Management

• Vented front and two bottom located fan mounting positions facilitate thermal management

Cable Management• Rackrail adjusts to provide a space from 1” to 4” between top cover and

equipment faces, allowing abundant room for D-Ring cable managersCode Compliancy

• Grounding/bonding stud facilitates the proper grounding and bonding ofelectronic equipment, as per NEBS and NEC standards

• UL Listed in the US and Canada

lockinghingedbody

locking hingedplexiglass top cover

adjustable rackrail provides ample roomfor D-Ring cable managers

WRP-6unique vertical racking provides a generous 23‰ useable depth

WRP-6

vented for cooling

laser knockout and electrical knock-outs in backpan

SBX-10rack is easily fastened to back-pan with included securityscrews and driver bit

WRS-6shown with topcover open

removable backpanpre-mounts foreasier installation

electrical knockoutsin top and bottom

includesdoor!

accepts two41/2” fans(not included)

25 1/4”

281/2”

1 7”

PART # RACKING HEIGHT USEABLE DEPTH WEIGHT CAPACITY DEALER PRICE50-70190 12 1/4‰ (7 space) 14 3/4‰ 75 lbs. $188.5550-70381 17 1/2‰ (10 space) 14 3/4‰ 100 lbs. $264.80

Specify a WRP or WRS when vertically wall mounting deep eqiupmentStructural Features

• Removable backpan simplifies installation and provides easy access to equipment connections

• Fully welded center section utilizes 18-gauge steel, backpan constructed from 14-gauge steel

• Locking front door swings open a full 180º on a virtually indestructible hinge for rugged security and unobtrusive accessibility

• Deep rail-to-door clearance ratio provides flexibility not found in flush-mount door designs

• Standard 11-gauge, 10-32 threaded rackrail with marked rackspace increments to speed equipment mounting

Thermal Management• Ventilation slots at top & bottom of each side promote passive

thermal management Cable Management

• 2” and w” electrical knockouts at top, bottom and rear facilitate cable entry

SBX Series Wall Mount Cabinet

A&E SPEC. # 96-068

BLACKPART #

DEALERPRICE

PUTTYPART #

DEALERPRICE

RACKINGHEIGHT

USEABLEDEPTH

WEIGHTCAPACITY

50-70191 $260.68 WRP-4 $288.40 7‰ (4 space) 23‰ 150 lbs.50-70192 $270.40 WRP-6 $298.13 101/2‰(6 space) 23‰ 150 lbs.50-70193 $305.04 WRP-8 $325.85 14‰ (8 space) 23‰ 150 lbs.

RACKS & ACCESSORIES Wall Mount Cabinets

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T68

Page 71: Milestek 2013 Winter/Spring Dealer Catalog

Pivoting Panel MountThe logical choice for wall mounting patch panels and network equipment, pivoting panelmounts are offered in 6”, 12”, and 18” depths and provide easy rear access. Innovativedesign with 90º positive stop facilitates punching down while fully open. Featuring abundanttie points for cable management, hook and loop cable fasteners and rugged steel construction,each unit is finished in a durable black powder coat.

PART # OVERALL HEIGHT RACKING HEIGHT DEPTH WEIGHT CAPACITY DEALER PRICE50-70565 5¾‰ 3 ½‰ (2 space) 6‰ 20 lbs. $52.9850-70566 9 ¼‰ 7‰ (4 space) 6‰ 20 lbs. $60.9950-70567 12 ¾‰ 10 ½‰ (6 space) 6‰ 30 lbs. $65.8350-41003 12 ¾‰ 10 ½‰ (6 space) 12‰ 40 lbs. $109.1450-41004 16 ¼‰ 14‰ (8 space) 12‰ 60 lbs. $117.1450-41005 16¼‰ 14‰ (8 space) 18‰ 60 lbs. $134.79

PART # RACKING HEIGHT DEALER PRICE50-41014 1¾‰ (1 space) $22.4550-41001 3½‰ (2 space) $30.3350-41009 7‰ (4 space) $36.9350-41015 10½‰ (6 space) $43.3550-70576 top dust cover acts as

an equipment shelf $21.51

Hinged Panel MountOur HPM Series provides simple and straightforward wall mounting of rackmountcomponents and can also be rackmounted to any 19” open frame rack. Hinged to providerear access to mounted components, each of the 1, 2, 4, and 6 space units are 6” deep.Features abundant tie points for internal cable management, hook and loop fasteners, asmooth cutout in rear for cable pull-through and heavy-duty threaded rackrail.

New Adjustable Depth HPM Series available. One side hinged at two points for easyrear access. Simple adjustable depth accommodates components from 9" - 15". Available in 4, 6 or 8 rackspace models. Built-in cable management.

New Vertical Panel Mount Series is a cost effective, versatile solution to wall mountracking. Can accommodate all depths of equipment. Mounts horizontally or verticallyallowing versatile component placement. Available in 2, 3 or 4 rackspace models. 200 lb. weight capacity

Hinged panelmounts featureholes to allowmounting directly torackrail of any openframe rack

50-41014

50-41014

50-41019

50-70576

Adjustable depthHPM from 9‰ to 15‰

Rackspaces:4, 6, or 8

A self-squaring rack for mounting virtually any data or telecommunications component, theWall Mount Open Frame Rack is quick and easy to assemble thanks to its self-aligning design.Rugged steel construction features 11-gauge, 10-32 threaded rackrail and a black texturedpowder coat finish. WM Series racks are offered in two depths (12” and 18”), with models inheights ranging from 17¾” to 56¼”.

50-70135shown with HCM-2D horizontalcable manager

fixed design preventskinking or breaking of fiber-optics

Includes rack screws PART # OVERALL HEIGHT RACKING HEIGHT DEPTH WEIGHT CAPACITY DEALER PRICE

50-70568 17¾‰ 14‰ (8 space) 12‰ 200 lbs. $103.6850-70569 30‰ 26¼‰ (15 space) 12‰ 200 lbs. $106.7150-70570 56¼‰ 52½‰ (30 space) 12‰ 175 lbs. $125.0450-70571 17¾‰ 14‰ (8 space) 18‰ 150 lbs. $118.9350-70135 30‰ 26¼‰ (15 space) 18‰ 150 lbs. $129.5950-70124 56¼‰ 52½‰ (30 space) 18‰ 125 lbs. $144.84

TIA/EIA COMPLIANT

TIA/EIA COMPLIANT

Wall Mount Open Frame Rack

PIVOTING PANEL MOUNT, HINGED PANEL MOUNT AND WALL MOUNT OPEN FRAME RACK

PART # DESCRIPTION DEALER PRICE50-41020 4 space, adjustable depth 9" - 15" $69.5450-41021 6 space, adjustable depth 9" - 15" $74.0350-41022 8 space, adjustable depth 9" - 15" $78.51

Standard HPM Series Adjustable HPM Series

PART # DESCRIPTION DEALER PRICE50-41025 2 rackspace, vertical panel mount $50.65

50-41026 3 rackspace, vertical panel mount $56.38

50-41027 4 rackspace, vertical panel mount $62.04

VPM Series

VPMVersatile solution towall mount racking.

RACKS & ACCESSORIES

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

For Expert Customer Service,Call Our Sales Team Today!

Wall Mount Racks

69

Page 72: Milestek 2013 Winter/Spring Dealer Catalog

Steel 2-Post Relay RacksAll-steel 19" equipment racks with 11-gauge steel side channelsare self-squaring to speed up rack assembly. Rails are tapped on

front and rear flanges with 10/32" threads and arespaced 5/8" - 5/8" - 1/2". Base has approximately20" x 16" footprint and two assemblies. Two anglesform top brace. Black powder-coat finish. 50 rackscrews are provided for mounting shelves and panels.Optional 18" deep cantilever support base (20" x 24"

footprint) offers extra stabilityfor free-standing applications.No special tools required forassembly. Hex wrenchessupplied. The 84"H rack has45 rack spaces and the 72"Hhas 38 spaces.

Swing Frame Rack

PART # OVERALL HEIGHT RACKING HEIGHT DEPTH WEIGHT CAPACITY DEALER PRICE50-41006 27 1/4‰ 21‰ (12 space) 12‰ 100 lbs. $186.2650-41029 41 1/4‰ 35‰ (20 space) 12‰ 100 lbs. $167.9550-70572 27 1/4‰ 21‰ (12 space) 18‰ 100 lbs. $142.0450-70573 41 1/4‰ 35‰ (20 space) 18‰ 100 lbs. $180.5050-41030 50‰ 43 3/4‰ (25 space) 18‰ 100 lbs. $204.4950-41031 27 1/4‰ 21‰ (12 space) 24‰ 100 lbs. $163.1450-41032 41 1/4‰ 35‰ (20 space) 24‰ 100 lbs. $211.4050-41033 50‰ 43 3/4‰ (25 space) 24‰ 100 lbs. $237.81

TIA/EIA COMPLIANT

AC

Aluminum 2-Post Relay Racks

KEY PART # DESCRIPTION DEALER PRICEA 50-70118 Steel Rack 19" x 84"H $173.71

50-70377 Steel Rack 19" x 72"H $163.80B 50-70119 Cantilever Support Base $72.70

• Self-aligning design speeds assembly • 1600 lb. weight capacity • 1/8" (11-gauge) steel channels for strength • Aluminum top angles for easy field-drilling • Stabilizer gussets on feet • Durable black powder coat finish • 50 rack screws included • Optional cantilever support base available • 10-32 threaded hardware available

KEY PART # DESCRIPTION DEALER PRICEC 50-70304 Black Aluminum Rack 19" x 84"H $135.31

50-99004 12-24 Rack Screws $17.00

• 1600 lb. weight capacity

• 3/16" extruded aluminum uprights are 12-24 threaded front and rear

• Heavy duty 1/4" aluminum base is 15" deep for stability and includesholes for securing to floor

• Heavy duty 1/4" thick aluminum top angle provides extra stability for cable ladders

• Easy-to-assemble design saves on freight

• Includes 25 qty 12-24 rack screws

• Attractive silver brushed aluminum or black powder coat finish

B

• Open-back design maximizes useable wall space • 90º opening with positive stop facilitates punching down of wires • Ships ready-to-assemble to reduce space needed for storage and transport• Unique, open swing frame design utilizes pivot points instead of

hinges and can be inverted to allow opening from the left or the right. • Durable black powder coat finish • 50 rack screws included • Abundant tie points and cable pass-throughs ease cable management • Permanently lubricated bushings with a proprietary pivot prevent sag

Open position90 degree opening with positivestop to facilitate punch-down

RACKS & ACCESSORIES Swing Frame and 2-Post Racks

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T70

Page 73: Milestek 2013 Winter/Spring Dealer Catalog

*for international use

QFP-1

50-70166(QTFP-2)

120VANODIZEDPART #

120VTEXTUREDPART #

DEALERPRICE RACKING HEIGHT

FREEAIR DBRATING

# OFFANS

INSTALLED

FREEAIRCFM

QFP-1 50-70165 $78.75 5¼‰ (3 space) <30 dBA one 50QFP-2 50-70166 $81.16 5¼‰ (3 space) <33 dBA two 100

120VPART #

DEALERPRICE SIZE DEPTH

FREE AIRDB RATING

FREE AIRCFM

50-70194 $35.65 4½‰ 1½‰ 39 dBA 95

QFAN $50.24 4½‰ 1½‰ <30 dBA 50

FAN-6 $62.99 6‰ 1½‰ 49 dBA 220

50-70289 $145.63 10‰ 3½‰ 49 dBA 550

PART # FITS DEALER PRICE50-70195 4½‰ fan $4.35GUARD-6 6‰ fan $10.2050-70290 10‰ fan $25.81

Occupying three rackspaces, these quiet fan panel assemblies provide quiet coolingfor demanding environments. Each assembly comes complete with fan(s) andgrille(s) installed. Available in a black brushed and anodized, or black texturedpowder coat finish; cord and plug included.

Quiet Fan Panel

Featuring smooth, ball-bearing design, the 120V fansmount flush and come in 41/2”, 6” and 10” models. QFANquiet fan includes guard with a black powder coat finish andis great for minimizing noise. 5-FAN-K includes allhardware needed to mount in a Slim 5 rack. Hardware and cord included w/ each unit.

Fans

Fitting 4-½”,6” and 10” fans, fan guards are “Hamburgergrille” style & have a flat black powder coat finish.

Fan Guards

50-70289(FAN-10)

QFANcomplete withblack powder coatfinish guard!

(GUARD-10)

50-70195*includes 2 fans **for international use

A&E SPEC.# 96-01063 TIA/EIA COMPLIANT

FAN-6

The Most Powerful One Space Blower You probably Won't Hear The QBP-2 is quieter,yet puts out more CFM than other 1 space fan panels. This unit uses a pair ofcustom-designed blowers, in a single rackspace.

Quiet Blower Panel

• For smaller rack systems and credenzas where space is at a premium and quietoperation is a must

• Quiet even at full speed; proportional speed assures the quietestoperation possible

• Low power consumption: blower only runs as needed and spins as fast as required by the heat load presented

• Proprietary blowers provide high static pressure to maintain airflow even in crowded racks. Superior to axial fans for maintaining airflow in restricted conditions

• Attractive appearance complements finished rack appearance

120 VPART #

DEALERPRICE

220VPART #

DEALERPRICE DESCRIPTION FINISH FREE AIR RATING MAX SOUND

LEVEL

QBP-2 $217.74 IQBP-2 $232.01 1 Rackspace BlowerPanel Flat Black 100 CFM 32 dBA

QBP-2A $239.63 IQBP-2A $253.11 1 Rackspace BlowerPanel

Black An-odized 100 CFM 32 dBA

50-70290

(GUARD)

RACKS & ACCESSORIES

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

For Expert Customer Service,Call Our Sales Team Today!

Fans & Fan Panels

71

Page 74: Milestek 2013 Winter/Spring Dealer Catalog

F

G

H

I

J

Rackmount Utility DrawersThe rackmount 19" drawer has full-extension ball bearing slides,allowing maximum opening of 14", a face-mounted drawer pull,built-in catch to keep it closed and a convenient rear knock-outfor cable runs.

AHeavy Duty RackshelvesCustomize your cabinets and racks to fit your system with our widearray of rackmount shelves and accessories. Shelves are constructed of16-gauge steel and are finished with a durable black powder-coat finish.

Sliding Shelves/Tray/DrawerThe heavy-duty sliding 19" shelf is made of 16-gauge steel.Occupying little more than one rack space, it latches in the open orclosed position and has ball bearing shelf slides extending it to a14" length. The 19" low-profile sliding shelf (1 space) extends11" on 3/4" nylon roller slides, equipped with positive-stop lockouts.The 19" steel sliding rack tray (1 space) has ball bearing shelfslides. Its universal equipment fixing points allow attachmentof a variety of equipment. The economy 19" rack drawer withface-mounted drawer pull is non-latching and non-locking. Theone rack space drawer is made of steel, with ball bearing slides.

B C

• Adjusts between front and rear rails• 500# weight capacity• Vented, 1 rack space

Adjustable Telescoping Rackshelf

PART # DESCRIPTION DEALER PRICE50-70815 16" - 26" $78.9650-70816 27" - 44" $97.26

KEY PART # DESCRIPTION DEALER PRICE50-70389 2-Space $84.79

A 50-70175 3-Space $90.2550-70176 4-Space $103.9950-70177 Keylock $12.8550-70178 Latch $9.65

KEY PART # DESCRIPTIONWEIGHTCAPACITY

USEABLEDEPTH

DEALERPRICE

B 50-70136 Heavy-Duty Sliding Shelf 50 lbs. 14 5/16‰ $97.60C 50-70198 Low-Profile Sliding Shelf 35 lbs. 14‰ $65.93

KEY PART # DESCRIPTIONRACKUNITS

USEABLEDEPTH

WEIGHTCAPACITY

DEALERPRICE

50-70160 19" Solid Cantilever 1U 10 1/2‰ 35 lbs. $21.31F 50-70102 19" Solid Cantilever 2U 14 1/2‰ 50 lbs. $27.01G 50-70120 19" Vented Cantilever 3U 17 3/8‰ 60 lbs. $49.76H 50-70121 19" Vented Center-Mount 2U 17 7/8‰ 50 lbs. $52.98I 50-70187 19" Half Equipment Width 1U 9 1/2‰ 25 lbs. $17.56J 50-70216 Fixed Writing/Keyboard 2U 17 5/16‰ 100 lbs. $71.33

Computer/Monitor Power CordCord is compatible with virtually all computers,monitors, printers, power strips and fax machines.

PART # SIZE DEALER PRICE39-200-12 1 ft. $1.4539-200-18 18 in. $4.1339-200-24 2 ft. $1.9039-200-36 3 ft. $2.0539-200-72 6 ft. $3.1539-200-120 10 ft. $4.3539-200-180 15 ft. $5.7539-200-300 25 ft. $5.30

6-outlet power strip is UL/CSA-listed to UL 1363/UL1449, with 1-MOV 90 Joules basic surge protection.Has 3’ power cord, integrated circuitbreaker and on/off rocker switch.

Basic Power Strip

APC Personal SurgeArrestReliable surge protection for home or office computers and electronic equipment.

• Lightning and power surge protection• Protection Working Indicator• $50,000 Lifetime Equipment Protection

PART # MODEL SURGE RATING (JOULES) DEALER PRICEAP-PER7 7 Outlet 240 $16.56

PART # DEALER PRICE

80-20105 $5.67

POWER STRIPS

RACKS & ACCESSORIES Drawers/Rackshelves/Power Strips

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T72

Page 75: Milestek 2013 Winter/Spring Dealer Catalog

The 50-70432 rackmount power distribution unit is equipped with 8 rear outlets, and one front outlet. Standard equipment includessurge and spike protection, EMI filtering, and a 9' cord. A generous 9" depth offers easy access to the 15 amp rear paneloutlets, which are solidly mounted on yokes to eliminate deflection.An illuminated combination power switch/ circuit breaker islocated on the front panel. UL listed in the US and Canada.

PART # DESCRIPTION DEALER PRICE

50-704329 Outlet, Single 15 Amp Circuit, Surge/SpikeProtected Rackmount Power Distribution with9' Cord, Black Power Coat Finish

$73.46

front

rear

RACK MOUNT POWER STRIPS

The 50-70726 rack mount power distribution unit with local andremote notification of surge suppression status is equipped with 8 rear outlets and one front outlet. Two front LED status indicatorsdisplay the level of protection provided by the unit's 2 stage surge and spike suppression. The PD-915RV-RN providesnotification of surge suppression status to any customer suppliedmonitoring device.

PART # DESCRIPTION DEALER PRICE50-70726 9 Outlet, Single 15 Amp Circuit, Surge/Spike

Protected Rackmount Power Distribution with 2Stage Surge Suppression and Notification

$114.73

front

rear

STAGE 1INDICATOR

STAGE 2INDICATOR STATUS

On On Full Protection

Off OnStage 1 Compromised

Stage 2 Active

Off Off Load Unprotected

MULTI-MOUNT RACK MOUNT POWER STRIPSDesigned to optimize space and efficiency inpower management, the new single circuit, 15 Amp rackmount power distribution systemprovides up to 20 outlets within a shallow depth.

• Versatile design allows for the unit to bemounted either horizontally or vertically in the rack

• Shallow 4" depth• Up 20 total outlets, front and rear• 9’, 14 gauge SignalSafe™ power cordminimizes the effects of AC magnetic fields

• Reversible, adjustable mounting earsprovide more flexible installation optionswith either 0º or 90º mounting

• Outlets are oriented in various directions to accommodate plugs of different shapes, sizes and orientations. When installed with 90º orientation, the unit supports heavy "wall wart" power supply plugs.

PART # DESCRIPTION DEALER PRICE50-70723 20 Outlet, Single 15 Amp Circuit, Multi-Mount Power

Distribution, 9Ê cord, 4‰ deep, Black Power Coat Finish$58.39

50-70724 20 Outlet, Single 15 Amp Circuit, Multi-Mount PowerDistribution, 9Ê cord, 4‰ deep, 10 Switched Outlets,Black Power Coat Finish

$68.39

50-70725 18 Outlet, Single 15 Amp Circuit, Multi-Mount PowerDistribution, 9Ê cord, 4‰ deep, 2-Stage Surge/Spike, Remote Notify, Black Power Coat Finish

$85.95

Sequenced models also feature:• Three channels of sequencing (two outlets per channel, 6 total)• Local or remote control• Adjustable sequencing delays up to 6 seconds• LED power indication

Surge protected models also feature:• Two stages of protection, with remote status notification• LED status indicators

50-70726

front

rear

50-70724

50-70723

50-70725

RACKS & ACCESSORIES

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

For Expert Customer Service,Call Our Sales Team Today!

Rack Power Strips

73

Page 76: Milestek 2013 Winter/Spring Dealer Catalog

• Economical & effective for cable management • 5 styles for any application • Finished in durable black powder coat

Horizontal Cable ManagersOrganize patch cords and maintain a required bend radius. Availablein a wide variety of styles to suit any application. The D-Ring providesa creative solution for adding individual D-Rings to a rack or on a wallusing appropriate fasteners. For optimal performance, do not exceed a50% fill rate when passing cables through cable rings. Constructedfrom 16-gauge steel, and finished in a durable black powder coat.

V W X Y Z

Rack Fasteners

Flanged Blank PanelsBlack powder finish

F

G

H

I

JK L M

N

O

P

Q

R

A

BC

D

E

A

B

C

D

E

Horizontal Lacer Bars

KEY PART # DESCRIPTION DEALER PRICEA 50-70376 1¾" (1 space) “Micro-Clip” Style $18.78B 50-70114 1¾" (1 space) “Micro-Clip” Style, with End Rings $25.33C 50-70374 1¾" (1 space) “D-Ring” Style $23.46D 50-70117 1¾" (1 space) “D-Ring” Style, with End Rings $25.33E 50-70375 3½" (2 space) “D-Ring” Style $25.33F 50-70115 3½" (2 space) “D-Ring” Style, with End Rings $27.21G 50-70132 1¾" (1 space) “D-Ring”, Front and Rear $29.10H 50-70133 3½" (2 space) “D-Ring”, Front and Rear $30.98I 50-70109 1¾" (1 space) “Micro-Clip” Style, with End Rings $24.34J 50-70131 Wall-mount/Rackmount “D-Ring” $7.55K 50-70130 D-Ring 2 5/16” w x 6”h $6.63L 50-70129 D-Ring 2 5/16” w x 3 7/8” h $7.20

KEY PART # DESCRIPTION DEALER PRICEM 50-70153 1-Space (1¾‰) Single Sided Slot Duct, 2‰ Deep $29.19N 50-70184 Access Panel 2-Space $22.29O 50-70185 Access Panel 4-Space $26.36P 50-70186 Access Panel 6-Space $31.96Q 50-70183 Filter Panel 3-Space $22.59R 50-70155 Single Sided Center Slot Duct - 35‰ long $43.04S 50-70156 Single Sided End Slot Duct - 35‰ long $42.00

KEY PART # DESCRIPTION DEALER PRICEV 50-99002 Phillips Head 3/4" Screw 100 pack (10/32") $11.23W 50-99008 Six Lobe Screw 50 pack $10.81X 50-99009 Six Lobe Driver bit $9.08Y 50-99005 Square Head Screw100 pack (10/32") $18.31Z 50-99006 Square Head Driver Bit $2.26

KEY PART # DESCRIPTION DEALER PRICEA 50-70584 4" Offset Round Rod $5.58B 50-70583 1.5" Offset Round Rod $4.65C 50-70126 Round Rod $3.73D 50-70127 Rectangular Bar $3.72E 50-70211 „L‰ Bar $2.38

PART #RACKSPACES

DEALER PRICE

50-70110 1 $5.0250-70111 2 $6.7850-70112 3 $9.26

PART #RACKSPACES

DEALER PRICE

50-70174 4 $11.6150-70577 5 $14.45

S

RACKS & ACCESSORIES Rack Cable Management

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T74

Page 77: Milestek 2013 Winter/Spring Dealer Catalog

H

I

O

P

B C

G

A

DE

K

L

Rack mounting plate accommodates most cable ladders and includes mounting hardware and J-bolts as shown above. Typical application is shown below.

LADDER RACKS

KEY PART NO. DESCRIPTION COLOR DEALER PRICE A 50-70324 Ladder Rack 6'L x 12" W Black $47.85A 50-71325 Ladder Rack 10'L x 12" W Black $112.26B 50-70326 Outside Radius Runway Black $73.18C 50-70328 Inside Radius Runway Black $68.54D 50-70340 Triangular Support Bracket Black $28.89E 50-70332 Wall Angle Bracket Black $19.61F 50-70330 Rack Mounting Plate Black $30.50G 50-70342 Cable Retaining Post Black $25.35H 50-70344 Threaded Ceiling Kit Black $15.23I 50-70346 5/8" x 6' Threaded Rod $27.48J 50-70334 Vertical Wall Bracket (Pair) Black $12.67K 50-70336 Junction Splice Kit (Pair) Black $6.79L 50-70338 Butt Splice Kit (Pair) Black $6.34M 50-70347 Foot Kit (Pair) Black $19.91N 50-70350 J-Bolt Kit (Pair) $3.24O 50-70349 Protective End Cap (Pair) Black $4.81P 50-70516 90 Degree Corner Radius Black $83.05

Call MilesTek for 18‰ and 24‰wide ladder rack options.

J K

L

N

M

E

FF

RACKS & ACCESSORIES

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

For Expert Customer Service,Call Our Sales Team Today!

Ladder Racks

75

Page 78: Milestek 2013 Winter/Spring Dealer Catalog

RHINO Labels• RHINO labels are engineered

to be smear-proof and resistantto moisture, heat and other harsh elements

• Industrial-strength adhesivesproduce labels that stick andstay stuck- even on small diameter cables

• Drop-in cartridge design easilyloads into your RHINO 5000 or 3000 label printer

Flexible Nylon Labels - Wire/cable, flat, curved, rough, smooth surfaces

Heat Shrink Tube - Best labeling solution for wires/cables

Vinyl Labels - Ideal for outdoor applications

Permanent Polyester - For flat, smooth or textured surfacesPART # DESCRIPTION DEALER PRICE70-50535 ½‰ White Flexible Nylon $14.1370-50539 3/4‰ White Flexible Nylon $15.6170-50536 ½‰ Yellow Flexible Nylon $14.1370-50540 3/4‰ Yellow Flexible Nylon $15.61

PART # DESCRIPTION DEALER PRICE70-50584 ½‰ White Vinyl $12.1870-50562 3/8‰ White Vinyl $12.1870-50585 3/4‰ White Vinyl $13.64

PART # DESCRIPTION DEALER PRICE70-50531 3/8‰ White Permanent Polyester $12.1870-50533 ½‰ White Permanent Polyester $12.1870-50537 3/4‰ White Permanent Polyester $13.64

RHINO LABELS

PART # DESCRIPTION DEALER PRICE70-50602 Rhino 5200 Hard Case Kit $180.00

CABLE MANAGEMENT Rhino Labels and Printers

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T76

PART # DESCRIPTION DEALER PRICE70-50549 1/4 ‰ White Heat Shrink Tube $27.0570-50550 3/8‰ White Heat Shrink Tube $29.1370-50552 3/4‰ White Heat Shrink Tube $33.2970-50551 ½‰ White Heat Shrink Tube $31.2070-50555 ½‰ Yellow Heat Shrink Tube $26.81

RHINO LABEL PRINTERS

PART # DESCRIPTION DEALER PRICE70-50600 Rhino 5200 Professional Label Printer $127.79

PART # DESCRIPTION DEALER PRICE70-50599 Rhino 6000 Hard Case Printer Kit $291.66

PART # DESCRIPTION DEALER PRICE70-50581 Rhino 6000 Professional Label Printer $208.34

RHINO 5200 Professional Label Printer• Patented one-touch “Hot Keys” automatically

format label text for electrical and patch panels,wire and cable flags, face plate tags, terminaland 110 blocks, horizontal and vertical wraps,vertical and fixed-length applications

• Large 14 character, LCD backlit screen display• Prints Code 39 and Code 128 barcodes on

RHINO labels up to ¾” wide• Includes RHINO 5000 printer, one ¾” white

flexible nylon label cartridge, one ½” whitepermanent polyester label cartridge, one ½”metallized label cartridge, and six “AA” batteries

RHINO 5200 Label Printer Hard Case KitPackage Includes:• Hard carry case• RhinoPRO 5200 with impact-

resistant bumper• One ¾” (19mm) flexible nylon label

cassette for wire and cable marking• One ¾” (19mm) permanent

polyester Rhino label cassette for avariety of flat and textured surfaces

• 6 AA batteries • AC adapter• User Manual

RHINO 6000 Professional Label Printer• Patented one-touch “Hot Keys” automatically

format label text for electrical and patchpanels, wire and cable flags, face plate tags,terminal and 110 blocks, horizontal andvertical wraps, vertical and fixed-lengthapplications

• Connects via USB to your PC or Mac®

• Prints Code 39 and Code 128 barcodes onRHINO labels up to ¾” wide

• Customize and save over 1000 labels - recallthem instantly

RHINO 6000 Label Printer Hard Case KitPackage Includes:• RhinoPRO 6000• Impact-resistant rubber bumper• One ½” (12mm) wide flexible nylon tape• One ½” (12mm) wide permanent

polyester tape• AC power adapter• User Manual• Comes with durable hard carry case

Page 79: Milestek 2013 Winter/Spring Dealer Catalog

CABLE/WIRE TYPE ¾” WIDE 1¼” WIDE 1 ¾”WIDECAT5E UTP 4 Pair 2 7 14CAT5E UTP 25 Pair 0 1 2RG58/U 3 9 19RG59/U & RG62/U 2 6 12RG6/U 1 5 9Fiber Optic 2 Strand* 4 11 23Fiber Optic 4 Strand* 3 10 20Fiber Optic 6 Strand* 2 8 16Fiber Optic 8 Strand* 2 6 13Fiber Optic 12 Strand* 2 5 11

1

3

4

5

6

7

(+F$) = additional freight charges apply

*62.5/125/900 PVC OFNR

2

KEY DESCRIPTION IVORY WHITE OFFICE WHITE DEALER PRICE1 Raceway ¾‰w x ½‰h x 6Êl, 20 pcs/box (+F$) 60-20120 60-20220 60-20320 $97.801 Raceway ¾‰w x ½‰h x 6Êl, 1 piece (+F$) 60-20121 60-20221 60-20321 $4.891 Raceway ¾‰w x ½‰h x 8Êl, 20 pcs/box (+F$) 60-20122 60-20222 60-20322 $130.391 Raceway ¾‰w x ½‰h x 8Êl, 1 piece (+F$) 60-20123 60-20223 60-20323 $6.522 Raceway 1¼‰w x ¾‰h x 6Êl, 20 pcs/box (+F$) 60-20124 60-20224 60-20324 $139.512 Raceway 1¼‰w x ¾‰h x 6Êl, 1 piece (+F$) 60-20125 60-20225 60-20325 $6.982 Raceway 1¼‰w x ¾‰h x 8Êl, 20 pcs/box (+F$) 60-20126 60-20226 60-20326 $186.012 Raceway 1¼‰w x ¾‰h x 8Êl, 1 piece (+F$) 60-20127 60-20227 60-20327 $9.303 Raceway 1¾‰w x 1‰h x 6Êl, 20 pcs/box (+F$) 60-20128 60-20228 60-20328 $199.923 Raceway 1¾‰w x 1‰h x 6Êl, 1 piece (+F$) 60-20129 60-20229 60-20329 $10.003 Raceway 1¾‰w x 1‰h x 8Êl, 20 pcs/box (+F$) 60-20169 60-20269 60-20369 $266.553 Raceway 1¾‰w x 1‰h x 8Êl, 1 piece (+F$) 60-20170 60-20270 60-20370 $13.334 Ceiling Drop ¾‰ 60-20160 60-20260 60-20360 $1.584 Ceiling Drop 1¼‰ 60-20161 60-20261 60-20361 $1.584 Ceiling Drop 1¾‰ 60-20162 60-20262 60-20362 $1.585 End Cap ¾¾‰ 60-20133 60-20233 60-20333 $0.885 End Cap 1¼‰ 60-20134 60-20234 60-20334 $0.975 End Cap 1¾‰ 60-20135 60-20235 60-20335 $1.056 Splice Cover¾¾‰ 60-20130 60-20230 60-20330 $0.886 Splice Cover 1¼‰ 60-20131 60-20231 60-20331 $0.976 Splice Cover 1¾‰ 60-20132 60-20232 60-20332 $1.057 Reducer 1¾‰ to 1¼‰ 60-20163 60-20263 60-20363 $0.887 Reducer 1¾‰ to ¾‰ 60-20164 60-20264 60-20364 $0.927 Reducer 1¼‰ to ¾‰ 60-20165 60-20265 60-20365 $1.068 Internal Cover 1‰ min. bend radius ¾‰ 60-20139 60-20239 60-20339 $0.988 Internal Cover 1‰ min. bend radius 1¼‰ 60-20140 60-20240 60-20340 $1.078 Internal Cover 1‰ min. bend radius 1¾‰ 60-20141 60-20241 60-20341 $1.169 Elbow Cover 1‰ min. bend radius¾1¾‰ 60-20151 60-20251 60-20351 $0.989 Elbow Cover 1‰ min. bend radius 1¼‰ 60-20152 60-20252 60-20352 $1.079 Elbow Cover 1‰ min. bend radius 1¾‰ 60-20153 60-20253 60-20353 $1.1610 External Cover 1‰ min. bend radius ¾‰ 60-20145 60-20245 60-20345 $1.7710 External Cover 1‰ min. bend radius 1¼‰ 60-20146 60-20246 60-20346 $1.9110 External Cover 1‰ min. bend radius 1¾‰ 60-20147 60-20247 60-20347 $2.0511 Tee Cover 1‰ min. bend radius ¾‰ 60-20157 60-20257 60-20357 $0.9811 Tee Cover 1‰ min. bend radius 1¼‰ 60-20158 60-20258 60-20358 $1.0711 Tee Cover 1‰ min. bend radius 1¾‰ 60-20159 60-20259 60-20359 $1.1612 Junction Box 2‰ Depth 60-20166 60-20266 60-20366 $3.8413 Junction Box Double Gang 1½‰ Depth 60-20167 60-20267 60-20367 $5.64

8

9

13

12

10

11

Surface raceway, fittings and junction boxes are made of 94V-0 PVC and comein 6 ft. and 8 ft. lengths and three widths, ¾”, 1¼” and 1¾”. Ideal for low-voltageUTP and coaxial wire, surface raceway system is a one-piece latching duct designed to contain, route and protect wire and cable when not feasible to run itwithin the wall. One-piece design cable duct has a flexible hinge, allowing numerous openings without discoloration or stress cracking. Self-locking, hiddenpositive latch allows quick re-entry and secure cable installation. Wide raceway base/boxes have foam-backed adhesive to assist in quick installation.Rubber-based adhesive is pressure-sensitive foam tape with high ultimate bondstrength, conforming to most any surface. Sold in single pieces or economical20-piece boxes. Minimum 1” bend radius fittings. 2” deep single-gang and 1½”deep double-gang junction boxes offered. Fittings for 1” minimum bend radiusconform to EIA/TIA CAT5e/5 requirements.

SURFACE RACEWAY SYSTEM

CABLE MANAGEMENT

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

For Expert Customer Service,Call Our Sales Team Today!

Surface Raceway

77

Page 80: Milestek 2013 Winter/Spring Dealer Catalog

COUPLINGS AND TERMINAL ADAPTERSCouplings for 1¼” to 2” Resi-Gard Raceway must be cementedusing Resi-Gard Solvent Cement.

RESI-GARD® FLEXIBLE RACEWAYIdeal for providing a main chase from the main distribution panel to asecondary hub in the attic or basement, Resi-Gard nonmetallic flexibleraceway is available in ¾" to 2" diameter sizes with factory installedpull tape in sizes 1" to 2". The raceway is hand bendable, lightweightand easily cut to length toreduce scrap. Bright orangecolor clearly signifies a lowvoltage installation.

Quick Connect Couplings and AdaptersCarlon one-piece quick connect couplingsare designed for quick, easy installation.

Carlon’s orange conduit clamps are designedspecifically for the installation of Resi-GardRaceways. Sold in bags of 5.

Resi-Gard® Conduit Clamps

BA

C

Low Voltage Open Backed BoxesDesigned with a hard shell thickness for increaseddurability. The Resi-Rings attached to the boxallow you easy access to the cable while keepingit safely out of the way from other trades.

Low Voltage Add-On BracketThe Add-On Bracket can be added-on to justabout any nonmetallic electrical box. Resi-Ringsfor cable or ¾” Resi-Gard raceway attachment.

Old Work BracketsDesigned specifically for the installation of low-voltagedevices in an existing wall. The backless box designaccommodates the space and bend radius requirementsof coaxial or data/communications cables.

D

E

F

Resi-Gard Solvent CementResi-Gard Solvent Cement is ideal for easy, tight installation of all Resi-Gard flexible nonmetallicraceway, fittings and accessories. Available in pintsizes with convenient brush top applicator.

Mud RingsA great alternative to metallic mud rings, this nonmetallic version is lighter in weight, has no sharpcorners or edges and is offered in the distinctive orangecolor that signifies structured cabling components.

The back is open toaccommodate appropriatebend radiuses.

PART # SIZE COIL LENGTH DEALER PRICE70-80001 ¾‰ 100 feet $55.7970-80002 1‰ 100 feet $72.0970-80003 1¼‰ 100 feet $87.9170-80004 1½‰ 50 feet $52.0870-80005 2‰ 50 feet $71.71

Resi-Gard® Standard CouplingsPART # SIZE DEALER PRICE70-80026 1¼‰ $0.4570-80027 1½‰ $0.5970-80028 2‰ $0.81

KEY PART # DESCRIPTION DEALER PRICEA 70-80037 ¾" Snap-In Adapter $0.95A 70-80038 1" Snap-In Adapter $1.44B 70-80039 ¾" Threaded Adapter $1.39B 70-80040 1" Threaded Adapter $2.08C 70-80041 ¾" Coupling $0.79

KEY PART # DESCRIPTION DEALER PRICED 70-80043 1-Gang Bracket $1.32

70-80046 2-Gang Bracket $1.75

KEY PART # DESCRIPTION DEALER PRICEE 70-80044 Single $0.98

70-80047 Dual $1.95

PART # SIZE DEALER PRICE70-80032 ¾‰ $1.6070-80033 1‰ $2.6770-80034 1¼‰ $3.0670-80035 1½‰ $3.1470-80036 2‰ $3.31

KEY PART # DESCRIPTION DEALER PRICEF 70-80045 Single Add-On Brackett $1.32

PART # DEALER PRICE40-40408 $10.11

PART # DEALER PRICE70-80048 $0.87

CABLE MANAGEMENT

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T78

Flexible Raceway

Page 81: Milestek 2013 Winter/Spring Dealer Catalog

CABLE MANAGEMENT

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

For Expert Customer Service,Call Our Sales Team Today! 79

Used for routing and protectingcable, slotted channel ducting ismade from high-impact, rigidblack PVC. The 3” wide ductingis available in 2” and 3” heights.The wiring duct covers provide anon-slip, plastic lining to ensurecovers remain in place. The ductand cover are sold separately.

Slotted Ducting

PART # DESCRIPTION DEALER PRICE70-50299 3‰W x 2‰H x 6-ft. L Slotted Duct $25.3870-50300 3‰W x 3‰H x 6-ft. L Slotted Duct $31.3070-50301 3‰W x 6-ft. L Duct Cover $9.27

Organizes cables and wires intoa neat path. Quick and easyinstallation is done by inserting wires through the split along thelength of the polyethylene tubing.Longer lengths are also available.

Convoluted Tubing

PART # DESCRIPTION DEALER PRICE70-50252 ½‰ x 10Ê Black $1.7370-50253 ¾‰ x 10Ê Black $2.1570-50254 1‰ x 10Ê Black $2.45

15

9

421 5

6

7

8

Wide Surface Cable Supports3

Cable Rings & Spool

101112

13

14

16

1817

19

These cable supports provide proper support of high-performancecabling, including CAT5e, higher speed copper and fiber-opticcables. The hangers’ extra-wide surfaces protect against cablebending, crimping and snagging. Two sizes accommodate upto 16 and 80 four-pair UTP cables. The 2” diameter loopwide-base J-hook can hold up to 80 4-pair UTP cables. Thesmall bundle J-hook will hold up to 16 4-pair UTP cables. Thesmaller J-hook’s unique bend-back tab provides containmentwithout pressure on cables. Both size J-hooks are made ofspring steel. Basic cable hangers (1) and (5) may be nailed,screwed or bolted to surfaces or structures. The drop wirehangers (2) and (6) have a multi-function clip that attaches ontoa vertical wire (#12 thru ¼”). The J-hooks for tee bars (3) and(7) snap onto acoustic grids. The cable hangers (4) and (8) arehammered onto beams. The cable cat pulley (9) allows easypulling of wire, up to 25 four-pair cable. Since the pulley’s J-hook is the same as the Wide Base Basic J-hook 70-50214, thepulley may be permanently attached, or the pulley and pin as-sembly may be removed and used with another J-hook.

KEY PART # DESCRIPTION DEALER PRICE1 70-50214 Wide Base Basic J-Hook $2.182 70-50215 Wide Base J-Hook Drop Wire Hanger $2.703 70-50216 Wide Base J-Hook Tee Bar $5.054 70-50217 Wide Base J-Hook Ham. Flange $4.555 70-50246 Sm. Bundle Basic J-Hook $1.036 70-50423 Cable Cat Pulley $15.567 70-50247 Sm. Bundle J-Hook Drop Wire Hanger $1.648 70-50248 Sm. Bundle J-Hook Tee Bar $3.239 70-50362 Sm. Bundle J-Hook Ham. Flange $2.92

KEY PART # DESCRIPTION SIZE DEALER PRICE10 70-50231 Plastic Comp. D-Ring 1 7/8‰ x 2 1/4‰ $0.8511 70-50232 Plastic Comp. D-Ring 3 1/8‰ x 3 1/4‰ $1.0712 70-50233 Plastic Comp. D-Ring 5 1/8‰ x 3 1/4‰ $1.5913 70-50235 Distribution Plastic Spool $0.7814 70-50433 Cable Hanger 3 1/4‰ x 2 1/4‰ $2.6715 70-50424 Bridle Ring 1/4‰ Thread $0.9416 70-50426 Bridle Ring Screw Thread $1.2517 70-50455 Aluminum D-Ring 3 1/8‰ x 3 1/4‰ $1.9318 70-50454 Aluminum D-Ring 1 7/8‰ x 2 1/4‰ $1.7519 70-50456 Aluminum D-Ring 5 1/8‰ x 3 1/4‰ $2.39

Ducting, Tubing, Cable Supports

Page 82: Milestek 2013 Winter/Spring Dealer Catalog

CABLE MANAGEMENT

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T80

Installation Tools, Testers

The FiberFish (1/4" dia. rods) and FiberFish II (3/16" dia. rods) are fiber-glass non-conductive rods. Rods screw together to make longer lengths forfishing cable in existing walls and attics or across drop ceilings.

FiberFish

BES CABLE INSTALLATION TOOLS

PART # DESCRIPTION DEALER PRICE40-40196 (+F$) 24' Kit $64.8140-40197 18' Kit $58.0640-40202 Attachment Kit $28.31

FiberFish 1/4” Dia. Rods

PART NO. DESCRIPTION DEALER PRICE40-40174 (+F$) 30' Kit $64.8140-40205 24' Kit $58.0640-40367 Attachment Kit $25.6940-40213 (+F$) Carrying Case $77.00

FiberFish II 3/16” Dia. Rods

FiberFish 1/4” Dia. RodsFiberFish 1/4” Dia. Rods

(+F$) = additional freightcharges apply

Same quality construction and durability you’ve come to expect from theFiberfish in a new Glow in the Dark version! Easily visible in dark areas likeattics, crawlspaces and basements and needs no outside light source to “glo”.

GlowFish

PART # DESCRIPTION DEALER PRICE40-40327 6' Kit (30' total) $72.8840-40328 3' Kit (24' total) $65.94

3/16" Glowfish

PART NO. DESCRIPTION DEALER PRICE40-40314 6' Kit (30' total) $68.5640-40315 3' Kit (24' total) $62.00

5/32" Glowfish II

This kit contains the basicinstallation tools for RJ45 and RJ11plugs and 110 & 66 type terminalsin a durable plastic tool box.Kit Includes:• Universal Crimper with RJ45 & RJ11 Die sets

• Pro Punchdown Tool with 110 &66 Bits

• Round Cable Cutter• Cable Stripper

Basic Network Installers Kit

TOOLS AND TESTERS

PART NO. DESCRIPTION DEALER PRICE40-50277 Basic Network Installer Kit $66.99

JDSI Lil Buttie Pro Test Set

PART NO. DESCRIPTION DEALER PRICETU-LB220 Telephone Test Set $172.36

Telephone test set with LCD readout and voltmeter.Features:• Five Number Memory• Technical Support Number programmed into

memory dial• Tone and Pulse Dialing• Last Number Redial --19 Digits• Electronic Ringer• Modular Cord Set Attachment• Headset for hands-free use

PART NO. DESCRIPTION DEALER PRICE40-30082 Toner/Probe/Case Kit $110.00

PART # DESCRIPTION DEALER PRICE40-30089 Uni-Network Tester $58.29

When it comes to wire identification, there's no better tool to havethan the 701K Classic, from the world'slargest manufacturer of tone andprobe kits!Kit Includes:• Selectable warble tone• Continuity testing• Polarity testing• 2 line modular test lead (RJ-11) • 3 color LED (identifies AC

ring voltage)• Weather resistant design

Toner/Probe/Case Kit

Uni-Network TesterThis compact tester withremote tests continuity ofindividual wires in eitherautomatic or manualmode. Accepts both RJ45and RJ11 plugs. IncludesBNC Adapter cables, case and 9V Battery.

Page 83: Milestek 2013 Winter/Spring Dealer Catalog

KEY PART NO. DESCRIPTION COLOR LENGTH WIDTH DIAMETERSTRENGTHIN LBS. QTY

DEALER PRICE

1 70-50108 Cable Tie Wrap Natural 4.00‰ 0.10‰ 0.75‰ 18 100 $0.832 70-50257 Cable Tie Wrap Black 4.00‰ 0.10‰ 0.75‰ 18 100 $1.073 70-50109 Cable Tie Wrap Natural 6.00‰ 0.10‰ 1.25‰ 18 100 $1.934 70-50258 Cable Tie Wrap Black 6.00‰ 0.10‰ 1.25‰ 18 100 $2.025 70-50110 Cable Tie Wrap Natural 8.00‰ 0.19‰ 2.00‰ 50 100 $2.525 70-50404 Cable Tie Wrap Natural 11.80‰ 0.19‰ 3.00‰ 50 100 $4.146 70-50259 Cable Tie Wrap Black 8.00‰ 0.19‰ 2.00‰ 50 100 $2.586 70-50405 Cable Tie Wrap Black 11.80‰ 0.19‰ 3.00‰ 50 100 $4.217 70-50219 Mount Tie Wrap Natural 8.00‰ 0.19‰ 2.00‰ 50 100 $4.798 70-50298 Mount Tie Wrap Black 8.00‰ 0.19‰ 2.00‰ 50 100 $5.149 70-50244 Base 4-Way Self-Adh. Natural 0.75‰ 0.75‰ 0.10‰ · 100 $9.749 70-50482 Base 4-Way Self-Adh. Natural 1.00‰ 1.00‰ 0.19‰ · 100 $11.8610 70-50388 Base 4-Way Self-Adh. Black 0.75‰ 0.75‰ 0.10‰ · 100 $10.4010 70-50483 Base 4-Way Self-Adh. Black 1.00‰ 1.00‰ 0.19‰ · 100 $12.482

1

3

4

5

6

78 9 10

High quality American made durable 6/6 natural nylon.The lowest insertion force with the highest tensile strength available.

Velcro Wraps

DESCRIPTION COLOR LENGTH 30/BAG DEALER PRICE 100/BAG DEALER PRICEPlenum Wrap Black 8‰ 70-50466 $9.70 n/aCable Wrap Black 12‰ 70-50398 $13.76 70-50399 $53.12

One Wrap Lineal -Reusable CableWrapsEach roll is 25 lineal yards.

PART # COLOR DEALER PRICE70-50470 Black $28.04

DESCRIPTION COLOR LENGTHPART NUMBER BY PACKAGING

30/BAG DEALER PRICE 100/BAG DEALER PRICE 900/ROLL DEALER PRICECable Wrap Black 8‰ 70-50318 $9.84 70-50329 $32.87 70-50340 $186.00

CABLE MANAGEMENT

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

For Expert Customer Service,Call Our Sales Team Today! 81

Cable Ties

Page 84: Milestek 2013 Winter/Spring Dealer Catalog

NETWORKING

CAT5E Bulk Cable – PVC, Plenum ..................................3

CAT6 Bulk Cable – PVC, Plenum.....................................3

Cross Connect Wire, Flat Silver Satin Cable....................3

MilesTek RJ45 and RJ11 Modular Plugs .........................3

RJ45 Boots.......................................................................3

UTP Stripper and Crimper Tools ......................................3

EZ-RJ45 Plugs and Tools.................................................4

Uni-Network Tester...........................................................4

RJ45/RJ11 Modular Adapters/Couplers...........................4

Punch down Tools ............................................................4

CAT5E, CAT6, RJ11 Jacks...............................................5

RCA, HDMI, USB, 3.5, BNC, Fiber,

Binding Post and F-type Jacks.......................................5

Plastic Insert Wall Plates..................................................6

Stainless Steel Insert Wall Plates ....................................6

Recessed Cable Plates....................................................6

Wall Plate Mounting Brackets ..........................................6

Modular Multimedia Distribution Panels ...........................6

Surface Mount Jacks........................................................6

CAT5E and CAT6 Patch Cords.........................................7

CAT5E and CAT6 Patch Panels .......................................7

110 and Type-66 Wiring Blocks........................................7

Leviton CAT5E, CAT6, RJ11 Jacks ..................................8

Leviton CAT5E, CAT6 Patch Panels.................................8

Leviton Decora Wall Plates and Inserts ...........................8

Leviton QuickPort Single-Gang Wall Plates .....................9

Leviton Surface Mount Housing .......................................9

Leviton Structured Media Centers, Modules ..................10

HellermannTyton Jacks, Wall Plates, Panels..................11

Fiber Optic Patch Cords.................................................12

Fiber Optic Patch Cords.................................................12

Fiber Wall Mount and Rackmount Fiber Enclosures ......12

Fiber Plug-In Adapter Modules ......................................12

10/100 Desktop Ethernet Switches................................13

10/100 Rack Mount Ethernet Switches ..........................13

10/100/1000 Gigabit Ethernet Switches.........................13

Fast Ethernet MM Converters ........................................13

Gigabit Ethernet Converters ..........................................13

USB Cables....................................................................14

USB Over CAT5E/CAT6 Extender Sets .........................14

USB 2.0 Over CAT5E/CAT6 Active Extender Sets .........15

AV DISTRIBUTION

HDMI Cables and Adapters ...........................................16

HDMI Splitters and Switches..........................................17

HDMI Matrix Switches....................................................18

HDMI Over Dual CAT5E/CAT6 Extenders.................19-20

HDMI Over Single CAT5E/CAT6 Extenders ...................21

HDMI Over HDBaseT.....................................................22

HDMI Over LAN/Ethernet Extender ...............................23

HDMI Over Dual CAT5E/CAT6 Splitters .........................24

HDMI Over Dual CAT5E/CAT6 Matrix Switchers ...........24

HDMI Over Single RG6/SDI Coax .................................25

HDMI Over Single Fiber Optics......................................26

HDMI Converters (USB, VGA, SDI,Component, Composite) ..........................................27-31

HD Videoconferencing ...................................................32

VGA Cables ...................................................................36

VGA Decora-Style Wall Plates .......................................36

VGA Aluminum Wall Plates............................................37

HD15/DB15 Gender Changes........................................37

VGA Splitters/Amplifiers .................................................38

VGA Switches and Matrix Switchers..............................39

VGA with Audio Over CAT5E/CAT6 Extenders .........40-41

VGA with Audio Over CAT5E/CAT6 Splitters..................42

DVI Cables .....................................................................43

DVI Splitters ...................................................................43

DVI Switches ..................................................................43

DVI Over CAT5E/CAT6 Extenders..................................44

Component/Composite CAT5E/CAT6 Wall Plates..........45

DisplayPort Cables.........................................................46

PRODUCT INDEX

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T82

Page 85: Milestek 2013 Winter/Spring Dealer Catalog

AV Feed-Thru Wall Plates (HDMI, Component,VGA, Whole House Audio) ............................................47

Component Video (RGB) Cables ...................................48

3.5 mm Stereo Audio Patch Cords.................................48

Stereo Audio/Video RCA Patch Cables .........................48

RG59 BNC and RCA Cables .........................................48

S-Video Cables ..............................................................48

AV Quick-Connect Cabling System – VGA ....................49

AV Quick-Connect Cabling System

– Component / Composite Video ..............................49-50

AV Quick-Connect Cabling System – DVI, HDMI...........51

AV Quick-Connect Integrated Wall Plates ......................52

Interseries Adapters – BNC, RCA, F, 3.5,1/4‰ ................53

XLR Microphone Cables ................................................53

XLR Wall Plates .............................................................53

3 Pin XLR and 1/4‰ Cable Connectors ...........................53

Speaker Cable ...............................................................54

Compression Audio Connectors/Tool .............................54

Speakon Connectors......................................................54

Mixed Connector Patch Bays and Modules ...................54

COAXIAL

DS3 BNC Connectors, 735A/734A ................................55

DS3 Bulk Cable..............................................................56

DS3 Tools .......................................................................56

DS3 Cable Assemblies ..................................................57

BNC Adapters ................................................................58

Racks and Shelves ........................................................58

Assembled BNC Panels .................................................59

BNC Crimp Plugs, 75 Ohm - Broadcast Digital..............60

BNC Crimp Plugs, 50 Ohm- Analog Video.....................60

BNC Adapters ................................................................60

BNC Termination Tools (Strippers, Crimpers) ................61

RG6 Dual/Quad Shield CATV Bulk Cable ......................62

RG59 CCTV Bulk Cable.................................................62

F-Type Connectors & Adapters......................................62

F-Type CATV Wall Plates ...............................................62

F-Type Cables ................................................................62

Video RF Splitters ..........................................................62

RG59 & RG6 Compression Connectors ........................63

Coax Strip and Compression Tools ................................63

RACKS & ACCESSORIES

Slim 5 Series Racks.......................................................64

ERK Series Racks..........................................................66

Wall Mount Cabinets ......................................................68

Pivoting Panel Mount .....................................................69

Hinged Panel Mount.......................................................69

Wall Mount Open Frame Rack .......................................69

Swing Frame Racks .......................................................70

2-Post Relay Racks........................................................70

Cooling Fans and Fan Panels ........................................71

Rackshelves and Drawers..............................................72

Computer/Monitor Power Cords.....................................72

Power Strips...................................................................72

Rack Mount Power Strips...............................................73

Horizontal Cable Managers............................................74

Horizontal Lacer Bars.....................................................74

Rack Fasteners ..............................................................74

Flanged Blank Panels ....................................................74

Ladder Racks .................................................................75

CABLE MANAGEMENT

RHINO Labels ................................................................76

RHINO 5200 and 6000 Label Printers ...........................76

HellermannTyton Surface Raceway System ..................77

Carlon In-Wall Raceway System/Accessories ...............78

Ducting, Tubing, Cable Supports....................................79

Cable Installation Tools ..................................................80

Network Testers..............................................................80

Network Installation Kit...................................................80

Cable Ties ......................................................................81

PRODUCT INDEX

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

For Expert Customer Service,Call Our Sales Team Today! 83

Page 86: Milestek 2013 Winter/Spring Dealer Catalog

AS9100C / ISO CERTIFIED

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T84

Page 87: Milestek 2013 Winter/Spring Dealer Catalog

Easily Apply for Credit Online!Visit our “Contact Us” page at MilesTek.com

Simply complete the onlinecredit application and a

Sales Representative willnotify you if approved. Or our credit team will contact you for further information if needed.

On our credit applicationpage, click “Apply Now”

CREDIT APPLICATION

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

For Expert Customer Service,Call Our Sales Team Today! 85

Page 88: Milestek 2013 Winter/Spring Dealer Catalog

The following are the terms and conditions ("Terms and Conditions") for the saleof products ("Products") by MilesTek Corp. ("MilesTek") to MilesTek's customers("Customers"). PLEASE READ THIS AGREEMENT CAREFULLY. ANY DIFFER-ENT OR ADDITIONAL TERMS SET FORTH IN CUSTOMER'S PURCHASEORDER OR SIMILAR COMMUNICATION ARE OBJECTED TO AND SHALLNOT BE BINDING ON THE COMPANY UNLESS A SEPARATE AGREEMENTHAS BEEN SIGNED BY AN AUTHORIZED OFFICER OF THE COMPANY. BYPLACING AN ORDER FOR PRODUCTS FROM THE COMPANY, OR BY ACCEPT-ING DELIVERY OF THE PRODUCTS DESCRIBED ON THE APPLICABLE PACK-ING SLIP, BILL OF LADING AND/OR INVOICE RECEIVED WITH THEPRODUCTS, YOU AGREE TO BE BOUND BY AND ACCEPT THESE TERMSAND CONDITIONS OF SALE.

1. ACCEPTANCE AND CANCELLATION OF ORDERSAll orders are subject to acceptance by MilesTek in writing by a duly authorizedagent of MilesTek; any written acknowledgement of receipt of an order shall not,in and of itself, constitute such acceptance. Orders accepted and processed byMilesTek may not be cancelled by Customer except as covered by the LimitedWarranty. Non-Standard Parts are defined as Products which are special orders,custom orders, orders for non-standard products, products not customarily in stockor orders for value-added products. Non-standard products are Non-Cancelableand Non-Refundable and for these products, all sales are final. Cable Assembliesbuilt-to-order in our facility are Non-Standard Products and are also Non-Cance-lable/Non-Refundable („NC/NR‰). In the event of cancellation or other withdrawal ofan order for any reason and without limiting any other remedy which MilesTek mayhave as a result of such cancellation or other withdrawal, reasonable cancellation orrestocking charges, which shall include all expenses than incurred and commitmentsmade by MilesTek, shall be paid by Customer to MilesTek. Customer requests toreschedule are subject to acceptance by MilesTek in its sole discretion. Ordersmay not be canceled or rescheduled after the order has been submitted byMilesTek to the shipment carrier. MilesTek reserves the right to allocate sales andlimit quantities of selected Products among its customers in its sole discretion.Product specifications and availability are subject to change without prior notice.

2. PRICESOrders are billed at the prices (in US dollars) in effect at the time of shipment.Prices will be as specified by MilesTek and will be applicable for the periodspecified in MilesTek's quote. If no period is specified, quoted prices will beapplicable for thirty (30) days. Most current pricing will be as displayed on theMilesTek website found at www.MilesTek.com, or any of itÊs affiliated websites(e.g. www.MilesTek1553.com, and others). The catalog reflects the latest pricinginformation available at the time of printing. Prices shown in the catalog are subjectto change without notice. Prices are subject to increase in the event of an increasein MilesTek's costs or other circumstances beyond MilesTek's reasonable control.If Customer does not purchase the quantity upon which quantity prices are based,Customer will pay the non-discounted price for the quantity actually purchasedand/or a cancellation or restocking fee. Prices are exclusive of taxes, impositionsand other charges, including: sales, use, excise, value added and similar taxes orcharges imposed by any government authority, international shipping charges,forwarding agent's and broker's fees, bank fees, consular fees, document feesand import duties.

3. TERMS OF PAYMENTAll payments must be in US Dollars.

For Domestic OrdersWe accept major credit cards MasterCard, VISA, American Express, and Discover.We also offer C.O.D. and Pre-paid by wire transfer, money order, company or personalcheck (personal check will delay order up to two weeks). Open Account Credit isavailable to businesses, schools and institutions or as otherwise specified byMilesTek subject to an approved credit application. To obtain a credit application,please contact any Customer Service or Sales Representative by calling 1-800-524-7444, or (+1) 940-484-9400. Or you may download a copy of theMilesTek Credit Application form.

For International OrdersWe offer MasterCard, VISA, American Express, Discover, prepaid by wire trans-fer, cashier's check in U.S.Dollars, as well as open account credit to qualified institu-tions and businesses. We cannot accept personal checks or certified personalchecks. Money orders can result in significant delays. Payment via Open AccountCredit can be established for companies having three U.S. references. We alsooffer Pre-paid by wire transfer, a wire transfer fee of $25.00 must be included. Or-ders will not be accepted until funds have been received in full and PurchaseOrder (PO) has been received. Customer is responsible for duties and taxes.

3.1 TERMS OF PAYMENTFor All OrdersCustomer agrees to pay the entire net amount of each invoice from MilesTekpursuant to the terms of each such invoice without offset or deduction. Orders aresubject to credit approval by MilesTek, which may in its sole discretion at any timechange the terms of Customer's credit, require payment in cash, bank wire transferor by official bank check and/or require payment of any or all amounts due or tobecome due for Customer's order before shipment of any or all of the Products. IfMilesTek reasonably believes that the Customer's ability to make payments maybe impaired or if Customer fails to pay any invoice when due, MilesTek may suspenddelivery of any order or any remaining balance thereof until such payment ismade or cancel any order or any remaining balance thereof, and Customer willremain liable to pay for any Products already shipped and all Non-StandardProducts ordered by Customer. Customer agrees to submit such financial informationas MilesTek may reasonably require for determination of credit terms and/orcontinuation of credit terms. Checks are accepted subject to collection and thedate of collection will be deemed the date of payment. Any check received fromCustomer may be applied by MilesTek against any obligation owing by Customerto MilesTek under this or any other contract, regardless of any statement appearingon or referring to such check, without discharging Customer's liability for anyadditional amounts owing by Customer to MilesTek. The acceptance by MilesTekof such check will not constitute a waiver of MilesTek's right to pursue the collec-tion of any remaining balance. Invoices not paid when due will bear interest todate of payment at the annual rate of eighteen (18%) percent or such lower rateas may be the maximum permitted by law. If Customer fails to make paymentwhen due, MilesTek may pursue any legal or equitable remedies, in which eventMilesTek will be entitled to reimbursement for costs of collection and reasonableattorneys' fees. There is a $25.00 service charge on all returned checks.

4. SALES TAXOnly residents of the State of Texas need to remit sales tax. MilesTek does notremit sales tax to states other than Texas. Any sales tax due that is not collectedby MilesTek is the responsibility of the customer.

5. DELIVERY AND TITLEAll shipments by MilesTek are F.O.B. point of shipment, and the amount of alltransportation charges will be paid to MilesTek by the Customer in addition to thepurchase price of the Products. Subject to MilesTek's right of stoppage in transit,delivery of the Products to the carrier will constitute delivery to Customer and titleand risk of loss will pass to Customer. MilesTek will make reasonable efforts toinitiate shipment and schedule delivery as close as possible to Customer's requesteddelivery date(s). Customer acknowledges that delivery dates provided byMilesTek are estimates only and that MilesTek will not be liable for failure to de-liver on such dates. Selection of the carrier and delivery route will be made byMilesTek unless specifically designated by Customer. MilesTek reserves the rightto make deliveries in installments. Delay in delivery of one installment will not enti-tle Customer to cancel any other installment(s). Delivery of any installment ofProducts within thirty (30) days after the date requested will constitute a timelydelivery. Delivery of a quantity which varies from the quantity specified shall notrelieve Customer of the obligation to accept delivery and pay for the Products de-livered.

6. MILESTEK'S LIMITED WARRANTYMilesTek warrants its products to be free from defects of workmanship and material.

BINDING TERMS AND CONDITIONS OF SALE

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T86

Page 89: Milestek 2013 Winter/Spring Dealer Catalog

If any such defects occur, replacement will be made without charge to our Customers.We strive to provide 100% Satisfaction for our Customers to the best of our ability.This warranty does not cover normal wear and tear, and abuse. The warranty perioddepends upon the product. All products are covered by a LIMITED WARRANTYfor a period of thirty (30) days from the date of shipment when purchased fromMilesTek. Customer must notify MilesTek within 30 days from date of shipment ofany defective product. An approved Return Materials Authorization (RMA) numbermust first be obtained from MilesTek prior to the return of any merchandise toMilesTek for inspection under warranty. Shipping charges for all materials re-turned under this Limited Warranty are to be prepaid by the Customer. This war-ranty is limited to the original purchaser. MilesTek's liability arising out of anysale of products to Customer is expressly limited to either (1) Credit or refund forthe purchase price paid by Customer for such products (without interest), or (2)Repair and/or replacement of such products, found to be defective after inspec-tion by MilesTek at its main headquarters, and such remedies shall be exclusive andin lieu of all others. Implied warranties of fitness for a particular purpose and mer-chantability are specifically excluded and shall not apply. Non-Standard productsas defined in Section 1 above are not eligible for return for refund. Products re-turned for refund may be subject to a 20% restocking fee. Customer's obligationsand MilesTek's remedies, with respect to defective or nonconforming products,are solely and exclusively as stated herein. Further, no warranty will apply if theProduct has been subject to misuse, neglect, accident or modification, or hasbeen soldered or altered in any way.

All returns must be shipped to: MilesTek Corp., 1506 Interstate 35W, Denton,TX 76207-2402 USA

7. LIMITATION OF LIABILITIESIn no event shall MilesTek be liable for any special, incidental or consequentialdamages of any nature including, but not limited to, damages resulting from lossof profit or revenue, recall costs, claims for service interruptions or failure to sup-ply downtime, testing, installations or removal costs, costs of substitute products,property damage, personal injury, death or legal expenses. Customer's recoveryfrom MilesTek for any claim shall not exceed the purchase price paid by Customerfor the goods, irrespective of the nature of the claim, whether in warrant, contractor otherwise. CUSTOMER SHALL INDEMNIFY, DEFEND AND HOLD MILESTEKHARMLESS FROM ANY CLAIMS brought by any party regarding products sup-plied by MilesTek and incorporated into the customer's product.

8. USE OF PRODUCTS IN LIFE SUPPORT, NUCLEAR AND CERTAIN OTHERAPPLICATIONSProducts are intended for commercial use only. Products are traceable at themanufacturer's level only. Not all products have lot level traceability. Products soldby MilesTek are not designed, intended or authorized for use in life support, lifesustaining, human implantable, nuclear facilities, or other applications in which thefailure of such Products could result in personal injury, loss of life or catastrophicproperty damage. If Customer uses or sells the Products for use in any suchapplications: (1) Customer acknowledges that such use or sale is at Customer'ssole risk; (2) Customer agrees that MilesTek is not liable, in whole or in part, forany claim or damage arising from such use; and (3) Customer agrees to indemnify,defend and hold MilesTek harmless from and against any and all claims, damages,losses, costs, expenses and liabilities arising out of or in connection with suchuse or sale.

9. STATEMENTS AND ADVICEIf statements or advice, technical or otherwise, are offered or given to Customer,such statements or advice will be deemed to be given as an accommodation toCustomer and without charge and MilesTek shall have no responsibility or liabilityfor the content or use of such statements or advice.

10. FORCE MAJEUREMilesTek will not be liable for delays in delivery or for failure to perform its obligations due tocauses beyond its reasonable control, including, but not limited to, product allocations, ma-terial shortages, labor disputes, transportation delays, unforeseen circumstances, acts ofGod, acts or omissions of other parties, acts or omissions of civil or military authorities,Government priorities, fire, strikes, floods, severe weather conditions, computer interrup-tions, terrorism, epidemics, quarantine restrictions, riots, or war. MilesTek's time for deliveryor performance will be extended by the period of such delay or MilesTek may, at its option,cancel any order or remaining part thereof without liability by giving notice to Customer.

11. EXPORT CONTROLProducts purchased or received under these Terms and Conditions are subject to exportcontrol laws, restrictions, regulations and orders of the United States. Customer agrees tocomply with all applicable export laws, restrictions and regulations of the United States orforeign agencies or authorities, and shall not export, or transfer for the purpose of re-export,any product to any prohibited or embargoed country, including but not limited to TheBalkans, Belarus, Burma, Cote d'Ivoire, Cuba, the Democratic Republic of the Congo, Iran,Iraq, North Korea, Sudan, Syria, and Zimbabwe, or to any denied, blocked, or designatedperson or entity as mentioned in any such United States or foreign law or regulation. Cus-tomer represents and warrants that it is not: (i) on any the Denied Persons List (as compiledby the United States Department of Commerce), Specially Designated Nationals List (ascompiled by the United States Treasury Department), Debarred Persons List (as compiledby the United States State Department) or any other United States or other government listof prohibited persons; and (ii) otherwise prohibited by United States or other law from pur-chasing the products or services hereunder. Customer shall be solely responsible to obtainany license to export, re-export or import as may be required.

12. GENERALThe Terms and Conditions may not be modified or cancelled without MilesTek's writtenagreement. Accordingly goods furnished and services rendered by MilesTek are sold onlyon the terms and conditions stated herein. The sale of Products hereunder will be governedby the Terms and Conditions, notwithstanding contrary or additional terms and conditions inany order purchase order, planning schedule, acknowledgment, confirmation or any otherform or document issued by either party effecting the purchase and/or sale of Products.Notwithstanding any terms and conditions on Customer's order, the information and condi-tions on the Credit Application are controlling over Customer and MilesTek. Any conflictingstatements or terms listed on the Customer purchase orders, invoice, confirmations orother Customer generated documents ("Customer Documents") whether heretofore orhereafter submitted are negated by submission of the Credit Application and the issuanceof credit by MilesTek, and all different or additional terms and conditions contained in anyCustomer Documents are hereby objected to by MilesTek. MilesTek's performance of anycontract is expressly made conditional on Customer's agreement to MilesTek's Terms andConditions of Sale, unless otherwise specifically agreed in writing by MilesTek. In the ab-sence of such agreement, commencement of performance and/or delivery shall be for Cus-tomer's convenience only and shall not be deemed or construed to be acceptance ofCustomer's terms and conditions, or any of them. No rights, duties, agreements or obliga-tions hereunder may be assigned or transferred by operation of law, merger or otherwise,without the prior written consent of MilesTek. The obligations, rights, terms and conditionshereof will be binding on the parties hereto and their respective successors and assigns.The waiver of any breach of any term, condition or covenant hereof or default under anyprovision hereof will not be deemed to constitute a waiver of any other term, condition, orcovenant contained herein or of any subsequent breach or default of any kind or nature.Any provision hereof which is prohibited or unenforceable in any jurisdiction shall, as tosuch jurisdiction, be ineffective to the extent of such prohibition or unenforceability withoutinvalidating the remaining provisions hereof in that jurisdiction or affecting the validity or en-forceability of such provision in any other jurisdiction. The Terms and Conditions will be gov-erned by and construed in accordance with the laws of the State of Texas and theapplicable laws of the United States.

MilesTek 22-September2010 Rev B

BINDING TERMS AND CONDITIONS OF SALE

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

For Expert Customer Service,Call Our Sales Team Today! 87

Page 90: Milestek 2013 Winter/Spring Dealer Catalog

ORDER FORM

Order at milestek.com or call 800-524-7444E-mail: [email protected] Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T88

Page 91: Milestek 2013 Winter/Spring Dealer Catalog

HDMI HDBASET SINGLECAT5E/CAT6 EXTENDERS

see page 22

HDMI OVER FIBERsee page 26

Solutions for Your Installation Challenges

PC RJ45 TO HDMI/VGAOVER LAN CONVERTER

see page 27

SDI TO HDMI CONVERTERsee page 27

HDMI AUDIO EXTRACTORCONVERTER

see page 28

HD VIDEOCONFERENCINGsee page 32

HDMI, VGA, 3.5MM AUDIOWALL PLATE

see page 47

USB 2.0 CAT5E/CAT6 EXTENDERSsee page 15

For Expert Customer Service Call Today! 800-524-7444 • milestek.com

HDMI OVER COAX IR EXTENDERsee page 25

Page 92: Milestek 2013 Winter/Spring Dealer Catalog

1506 Interstate 35WDenton, TX 76207-2402

Order from MilesTek today

800-524-7444 • milestek.com

Orders that total $750 or more(before taxes) will be shippedfree of freight charges within thecontinental United States. Making sure our customers staycompetitive and profitable is yetanother MilesTek Advantage.Note: items that are over-sized orexcessive weight, which wouldincur additional shipping chargesthan normal, are excluded fromthis offer. Example productsbeing some of our equipmentracking systems.

Dealers Get Free Freight on $750 Orders!

Terms of free freight offer on $750 orders is subject to change.

Confirm with a MilesTek sales professional on your next order.

MilesTek Dealers:ARE YOU GETTING

THE BEST PRICING ONLINE?Get Set-Up Today and Start Saving at MilesTek.com

As an authorized MilesTek dealer, you receive all of our exciting products at aspecial discount from our standard end-user pricing. But to have this pricingreflected online, you must have your account set-up as a dealer in our system.

Set-up up is easy. Simply contact our commercial sales team with yourcompany information at [email protected] or 800-524-7444 to haveyour reseller status confirmed. Changing your online account status to a dealertakes a matter of minutes after confirmation.

Make sure you’re getting the lowest pricing available online as an approvedMilesTek dealer. Contact MilesTek today!

MilesTek.com is New and Improved!• Faster Navigation Menu• Updated Design

and Features• Enhanced Search Engine• Easy Account Management• Technical Blog with news

on the latest applications