marshall resume labor trade

3
Marshall Osmanski 1250 S. 53 rd ST Milwaukee, WI 53214 (414) 885-8211 [email protected] Objective Is to obtain an entry level position in a flourishing company that revolves around; a labor trade, general construction, maintenance or material systems technology of manufacturing equipment. Experience EHI Roofing and Siding Services LLC. Date: May 2007-January 2010 Job Title: General Laborer Responsibilities: -Tear off old shingles and or siding and replace any lumber needing attention -Prep, weatherize housing insulation that may not be up to code or standards -Light carpentry if needed -Assist in roof repair maintenance both preventative and necessary -Work along side contractors and assist with framing, plumbing if needed and masonry -Keep work site clean and up to safety standards DW Office Installation LLC. Date: November 2012- December 2013 Job Title: Installer/Mover Responsibilities: -Read blue prints and if necessary tear down and dispose

Upload: marshall-osmanski

Post on 07-Jan-2017

123 views

Category:

Documents


1 download

TRANSCRIPT

Page 1: Marshall resume labor trade

Marshall Osmanski1250 S. 53rd ST

Milwaukee, WI 53214 (414) 885-8211

[email protected]

ObjectiveIs to obtain an entry level position in a flourishing company that revolves around; a labor trade, general construction, maintenance or material systems technology of manufacturing equipment.

Experience

EHI Roofing and Siding Services LLC. Date: May 2007-January 2010

Job Title: General Laborer Responsibilities:

-Tear off old shingles and or siding and replace any lumber needing attention-Prep, weatherize housing insulation that may not be up to code or standards-Light carpentry if needed-Assist in roof repair maintenance both preventative and necessary-Work along side contractors and assist with framing, plumbing if needed and masonry-Keep work site clean and up to safety standards

DW Office Installation LLC. Date: November 2012-December 2013

Job Title: Installer/Mover Responsibilities:

-Read blue prints and if necessary tear down and dispose of old office partition to follow floor plan for new installation-Properly install various brands of office equipment and furniture-Work with customer to understand their wants and needs of project and functionality of equipment-Relocate offices if need be update and perform needed maintenance -Properly load and unload box trucks for daily tasks if needed-Maintain customer satisfaction from job start to finish

HellermannTyton

Date: April 2014-October 2014

Page 2: Marshall resume labor trade

Job Title: Material systems Technician Responsibilities:-Daily walk through to ensure the proper material is running with the correct mold on

the correct press and that work order numbers match with no changes needed, make plans on the proper steps to begin next job once a run is complete

-Make changes to any material if necessary -Conduct moisture samples with moisture sensitive material-Correct and trouble shoot any processing issues, Novatech issues or clog and

vacuum pump issues-Work with press maintenance mechanic to resume production of downed presses to

continue production-Make daily material log email to all departments and post for necessary people to

view

Education Location: Spotted Eagle High School Degree: High School Diploma

Relevant Coursework: Shop class Co.Op Program Awards/Achievements: Football and Wrestling

SkillsI am equipped with a wide variety of skills from problem solving to critical thinking whether it be in the form of construction or manufacturing, to the material systems aspects or the maintenance. Am Not one whose afraid to get my hands dirty, also enjoy breaking down the mechanics of things I am eager to learn and happy to help. Always willing to try new things also open to new ideas towards the bettering of myself and a company whether it be from hands on training or education. I am willing to work harder and do my best to be more effective than most and enjoy a challenge. I also know my way around injection molding machines including their material systems technologies and hold a good knowledge of the injection molding process as a whole. I have acquired Hands on knowledge of the material dryers how to properly operate them, clean them and change out the materials to proper specifications if needed. I can also manage moisture levels to avoid processing issues and find a way to work them out if they occur. Also I understand the importance of regrind and how it can save money for the company. I know the processing aspect of the press and have experience in trouble shooting maintenance issues and can also navigate a nova tech board. I know my way around tools whether it be hand or power and with the rite help can build basically anything. I can follow blueprints and respect the do’s and dont’s of a construction site. I Am willing to start from the bottom and work my way up the ladder, have a positive attitude and good work ethic. I am determined to succeed and am willing to put in the man hours to do so. I want to listen and learn as much as I possibly can to further my skills.

Page 3: Marshall resume labor trade