major sale of traditional and modern furniture ...sandersonweatherall.agencypilot.com/store/... ·...

sw.co.uk

Sanderson Weatherall LLP. Registered in England Company Number OC 344 770 Registered Office 25 Wellington Street Leeds LS1 4WG VAT Number 945 6744 83

B I R M I N G H A M B R I S T O L E X E T E R L E E D S L O N D O N M A N C H E S T E R N E W C A S T L E T E E S S I D E Y O R K

Misrepresentation: Whilst every effort has been made to provide reliable information, Sanderson Weatherall LLP do not warrant the information contained herein and prospective

purchasers must satisfy themselves by inspection as to its correctness.

On the instructions of the Landlord and a Major Finance Company following the closure of the Nathan Furniture/ Sutcliffe Furniture UK Manufacturing Facility Piecemeal (subject to Conditions of Sale and unless sold previously)

Major Sale of Traditional and Modern Furniture Manufacturing Plant Woodworking Machinery Factory Equipment Fork Lift Trucks

(over 600 lots) Photographs & online auction bidding via sw.co.uk/auctions

Bidding: Closes from 12 noon Wednesday 28 June 2017

View: From 10am to 4pm Monday 26 and Tuesday 27 June 2017 or by appointment

At: Frostholme Mill, Burnley Road, Cornholme, Todmorden, West Yorkshire OL14 7ED, UK

The Chancery, 58 Spring Gardens, Manchester, M2 1EW Tel: +44 (0)161 259 7050

[email protected]

sw.co.uk/auctions

http://sw.co.uk/machinery-business-assets/current-auctions


GENERAL CONDITIONS OF SALE 1. Interpretation 1.1. In these General Conditions the following words and expressions shall

have the meanings set opposite: “Auction” any auction (whether a Live Auction or an Online

Auction and whether conducted independently or simultaneously) conducted pursuant to these General Conditions and the Special Conditions;

“Auctioneer” the person conducting the Auction or to whom the conduct of the Auction is delegated under General Condition 4.9 below;

“Bidder” any person who offers to purchase any Lot whether by bidding at Auction or offering to purchase by private treaty or tender;

“Bid” an offer to purchase any Lot whether by bidding at Auction or offering to purchase by private treaty or tender, and “Bids” and “Bidding” shall be construed accordingly;

“Buyer” any person who agrees to purchase any Lot whether at Auction or by private treaty or tender and as determined under General condition 4.12 below;

"Buyer's Premium" a commission payable by the Buyer on the completion of a Sale the amount of which is set out in the Special Conditions; The Auctioneer, when acting as Agent for the Seller, may also receive commission from the Seller.

“Catalogue” the catalogue incorporating these General Conditions and the Special Conditions;

"Clearance Date and Time" the date and time on which all Lots must be removed by the Buyer from the Location as specified in the Special Conditions;

“The Company” Sanderson Weatherall LLP (company number OC 344 770) whose registered office is at 25 Wellington Street Leeds LS1 4WG;

"Deposit" the sum payable by the Buyer to the Company as set out in the Special Conditions;

"Live Auction" any auction conducted at the Location or at such other location(s) as shall be notified by the Company in the Special Conditions or in the Catalogue;

“Location” the premises at which the Lots are located, details of which are set out in the Special Conditions;

“Lot” any Lot described in the Catalogue, on the Website or on the Company’s invoice;

"Online Auction" any auction conducted over the internet via the Website pursuant to these General Conditions and the Special Conditions;

"Sale" the sale of any Lot by Auction, private treaty or tender and as determined under General Condition 4.11 below;

“Seller” the person upon whose instructions the Company is conducting the Sale, details of whom are set out in the Special Conditions;

“Special Conditions” any additions to these General Conditions set out or referred to in the Catalogue, announced at Auction or otherwise specified by the Company;

"Website" the website at: www.bidspotter.co.uk; "VAT" value added tax chargeable under English Law for

the time being and any similar additional tax. 2. Application of these General Conditions 2.1. These General Conditions apply to every Sale of plant and machinery,

chattels and trade stocks conducted by the Company. 2.2. These General Conditions, the Special Conditions and any terms set out

in the Catalogue shall together comprise the "Conditions of Sale". 2.3. To the extent that these General Conditions are inconsistent with any

Special Conditions, the General Conditions shall prevail. 2.4. Bidding for any Lot shall be deemed to be an acceptance by the Bidder

of these General Conditions and the Special Conditions. 2.5. These General Conditions shall be governed construed and enforced in

accordance with the laws of England and Wales unless the Location is in:- 2.5.1 Scotland in which case the laws of Scotland shall apply; or 2.5.2 Northern Ireland in which case the laws of Northern Ireland

shall apply. 2.6. A reference to writing or written shall include e-mail. 2.7. Any word or phrase having a meaning defined in these General

Conditions shall have the same meaning when used in the Special Conditions.

3. Identity of the Parties 3.1. The Company offers each Lot as agent of the Seller and not as principal

unless otherwise indicated in the Catalogue. 3.2. The Auctioneer offers each Lot as agent of the Seller and not as

principal unless otherwise indicated in the Catalogue. 3.3. The identity of the Seller is set out in the Special Conditions. 3.4. Unless the Company has previously acknowledged in writing that the

Bidder Bids as agent on behalf of a named principal, every Bidder shall be taken to Bid on his own behalf as principal.

3.5. Any Bidder acting as agent on behalf of a named principal shall remain liable to the Seller and the Company for all obligations and liabilities of his principal jointly and severally with the principal. The Bidder warrants that he has the authority of his principal to make each Bid made.

3.6. Every Bidder is required to give his name and address and provide satisfactory proof of identity and such other information and documentation as is required to the Company before making any Bid and in the case of: 3.6.1 a Live Auction by the completion of a registration form; 3.6.2 an Online Auction by online registration at the Website; and 3.6.3 a private treaty or tender by prior registration or notification of

details, as and when requested by the Company. 3.7 The Company reserves the right at any time to reject the registration of

any persons and refuse access to the Auction at its sole discretion. 3.8 On registration for an Online Auction Bidders will be added to the

Company's mailing list for the purposes of notification of future sales by email. If a Bidder wishes to stop receiving such notifications they can unsubscribe at any time by clicking on the link provided at the bottom of each email.

3.9 On registration in accordance with General Condition 3.6 the Bidder acknowledges that only adults aged 18 years and over are entitled to enter into a legally binding contract and as a result they are the only people entitled to register for the Auction. By registering the Bidder warrants that he is aged 18 years or older and is capable of forming a legally binding contract.

4. Conduct of Auctions 4.1 Any Lot may be subject to a minimum bid or reserve price. The Seller is

entitled to change these at any time before the conclusion of the Sale. 4.2 The Seller, Auctioneer or any representative, agent or person acting on

behalf of the Seller may Bid for any Lot. Persons entitled to Bid pursuant to this condition 4.2 shall be entitled to place Bids on any Lot up to the reserve price including by placing Bids in response to other Bidders.

4.3 Lot descriptions will be amended as appropriate as and when information becomes available to the Company. Prospective Bidders must read Lot descriptions before making a Bid so that they are fully aware of any amendments to the description appearing in the Special Conditions and/or on the Website or in the Catalogue in relation to a particular Lot.

4.4 The Auctioneer may at any time before the conclusion of the Sale withdraw or divide any Lot or combine any Lots.

4.5 The Company may sell any Lot by private treaty or tender before or after the Auction. The Auctioneer may reject any Bid at his sole discretion and without being required to give a reason.

4.6 No Bid shall be retracted without the consent of the Auctioneer. 4.7 The Auctioneer may where there is a dispute between Bidders,

summarily determine the dispute or immediately again offer the Lot for sale, in each case without being required to give a reason.

4.8 The Auctioneer shall in every other respect decide how the Auction is to be conducted and without being required to give a reason.

4.9 The Auctioneer may in his sole discretion delegate to a person whom he believes to be competent the conduct of the Auction in accordance with these General Conditions.

4.10 The Auctioneer may from time to time act jointly with an associated Auctioneer who will be named in the Catalogue and/or in the Special Conditions.

4.11 A Sale is concluded (constituting acceptance of the Bidder's offer, subject to General Condition 4.12 below) when: 4.11.1 in the case of a Live Auction, on the fall of the Auctioneer's

hammer; and/or, 4.11.2 in the case of an Online Auction, at the close of the timed

Online Auction Sale as specified on the Website and as defined by General Condition 4.17.3 below or;

4.11.3 in the case of a private treaty or tender, when the Bidders Bid is accepted by the Company, such acceptance to be communicated to the Bidder in writing by way of receipt of the Company’s invoice.

4.12 The Buyer shall be the person who made the highest Bid before the conclusion of the Sale pursuant to General Condition 4.11 above subject to approval and acceptance by the Company, the Auctioneers and the Seller or such other Bidder as the Auctioneer and/ or the Company may declare to be the Buyer without being required to give a reason. The Auctioneer and/ or the Company and/ or the Seller is not bound to accept the highest Bid or any other Bid placed in the course of the Auction.

4.13 In the case of an Online Auction the Buyer, as determined under General Condition 4.12 above, shall within a reasonable time after the conclusion of the Sale receive by email an invoice in respect of the monies due for the Lot(s) purchased.

4.14 In the event that the reserve price is not met, the Company may consider the Bids received below the reserve price with the Seller who at its sole discretion may accept, reject or place a counteroffer.

4.15 On conclusion of the Sale and acceptance of the Bidders Bid pursuant to General Conditions 4.11 and 4.12 above, the Buyer acknowledges and agrees that he has entered into a contract with the Seller to buy the Lot and the Buyer must complete the transaction to purchase the Lot.

4.16 The Buyer may not remove any Lot he has bought until after the end of the Auction.

4.17 In relation to an Online Auction: 4.17.1 the Company cannot guarantee that the internet services will

operate continuously or without interruptions and this could affect the conduct of the Online Auction and the Bidders ability to Bid online. The Company shall not be liable in any respect in the event of any dispute due to errors, omissions or disruptions to internet services or power failures or any other unforeseen circumstances which may occur during the Online Auction;

http://www.bidspotter.co.uk/en-gb/auction-catalogues/sanderson-weatherall

4.17.2 the Auctioneer may at any time, without notice, postpone or cancel an Online Auction or extend an Online Auction beyond the published closing time (including extension of the timed Online Auction in accordance with General Condition 4.17.3 below);

4.17.3 the timed Online Auction Sale is auto bid extension enabled meaning that where a Bid is placed within ten minutes of the original scheduled close of the timed Online Auction the scheduled close of the timed Online Auction will automatically be extended by an additional ten minutes. This continues with a new scheduled close time each time a Bid is placed until no-one places a Bid before the last scheduled close of the timed Online Auction. Every time a Bid is placed within ten minutes or less left in the Online Auction an additional ten minutes Bidding time is added until there are no more Bids. Such time shall then be deemed to be the close of the timed Online Auction.

4.18 In the event that the Auctioneer unknowingly sells a Lot that was not eligible for Sale (i.e. there is a third party interest that comes to light) then the Auctioneer shall be entitled to immediately rescind that Sale without any further liability to the Auctioneer and/or Company or the Seller.

4.19 Copies of the Auctions (Bidding Agreements) Act 1927 and 1969 are held at the Company’s and/or the Auctioneer’s principal place of business.

5. Sale and Payment 5.1 The Buyer shall pay the following sums to the Company in full and

without set off:- 5.1.1 immediately upon the Sale of any Lot the Deposit, if requested

by the Company; and 5.1.2 the balance of the price of the Lot purchased, together with the

Buyer’s Premium by no later than 48 hours after conclusion of the Sale or, in the case of an Online Auction, after receipt of an invoice in respect of the purchased Lot(s) pursuant to General Condition 4.13 above, or such other time and date as may be specified in the Special Conditions; and

5.1.3 any other payment or amount due to the Seller and/or the Company pursuant to these General Conditions or the Special Conditions on demand.

5.2 In every case time for payment shall be of the essence. 5.3 In view of Money Laundering Regulations the Company reserves the

right to refuse payment in cash. Payments in cash of more than £7,500 will not, in any circumstances, be accepted.

5.4 If the Buyer fails to make any payment on the due date for payment then, without limiting any other right or remedy available to the Seller, the Buyer shall pay to the Company interest (both before and after any judgment) on the amount unpaid at the rate of 1.5% above the bank base rate of Barclays Bank Plc per month or any part thereof until payment in full is made.

5.5 Until the Buyer has fully complied with its obligations in this General Condition 5:- 5.5.1 title to any Lot bought shall not pass to the Buyer; 5.5.2 the Seller shall have a lien over any Lot bought by the Buyer in

the Auction; 5.5.3 if the Buyer effects or purports to effect a resale or any other

disposition of all or part of the Lot, the Buyer shall hold the proceeds of resale or other disposition on trust for the Seller.

5.6 All sums payable under these General Conditions and the Special Conditions are exclusive of any applicable VAT for which the Buyer shall be additionally liable to pay to the Company. On written request by the Buyer the Company will provide a VAT invoice.

5.7 The Company will only accept payment under this General Condition 5 from the Buyer or its authorised agents.

6. Removal of Lots 6.1 Risk of damage to or loss of the Lot shall pass to the Buyer immediately

upon the conclusion of the Sale. 6.2 The removal of Lots from the Location shall be undertaken by the Buyer

entirely at its own risk and without any liability whatsoever to the Company.

6.3 Buyers are responsible for any and all costs and expenses incurred in relation to the removal of Lots and any other applicable charges, taxes and insurance costs.

6.4 The Buyer may not remove any Lot until the Buyer has:- 6.4.1 paid by cleared funds all amounts payable pursuant to General

Condition 5 above in full; and 6.4.2 if requested by the Company produced satisfactory evidence to

the Company that the Buyer has adequate public liability insurance in respect of the indemnity set out in General Condition 6.11 below and/or deposited with the Company, by way of security for the costs of making good any damage likely to occur, such sum as the Company may stipulate.

6.5 The Company will only permit the removal of Lots purchased by the Buyer or its authorised agents.

6.6 The Buyer must remove each Lot purchased by the Clearance Date and Time for which time shall be of the essence. Lots may only be removed during normal working hours or such hours as are specified in the Special Conditions. No clearance on Bank or Public Holidays. In the absence of co-operation the Company and/or the Auctioneer reserves the right to insist on the order of the removal of Lots or parts thereof.

6.7 Buyers should co-operate regarding order of removal of Lots in order to comply with the Clearance Date and Time. If it transpires that a Buyer makes no effort to commence dismantling and the particular Lot is preventing other buyers from removing purchased Lots, then the

Auctioneer reserves the right to insist that removal take place immediately notwithstanding the specified Clearance Date and Time. In the event the Buyer does not comply with its obligations under this General Condition 6.7, then the Auctioneer reserves the right to arrange for the removal and/or storage of the Lot and charge any attendant costs to the Buyer.

6.8 If any Lot is unsold and has to be dismantled & lowered to allow the removal of any other lot, then such dismantling & lowering shall be the responsibility of the Buyer of the relevant Lot(s).

6.9 Title to computer software sold pursuant to the Sale of a Lot is not transferred under any Sale to the Buyer and use is subject to any licence or copyright restrictions and user conditions. The Sellers, Company and/or Auctioneers reserve the right to erase any private or sensitive information prior to the Sale or at any later date.

6.10 The Buyer and/or his removal contractor must liaise with the Company's site representative prior to commencing dismantling/removal of a Lot from the Location and must at all times comply with its obligations under clause 6.11 below.

6.11 When removing any Lot from the Location the Buyer shall, or shall procure that its removal contractors shall: 6.11.1 carry out a full assessment of Lot, the Location and the land or

buildings to which the Lot is fixed to assess the risks associated with detaching/ removing the Lot and shall fully satisfy themselves that they can detach/ remove the Lot in compliance with the Buyers obligations under this General Condition 6.11 prior to handling and/or commencing removal of a Lot;

6.11.2 obtain all relevant planning permissions (where required) in relation to the removal of building structures and plant housings;

6.11.3 buyers of Lots will be required to make good holes or voids exposed by the removal of Lots. Cladding taken off buildings for removal of plant & equipment will have to be replaced, unless otherwise specified by the Company;

6.11.4 when detaching any Lot fixed to land or buildings, do so safely and lawfully and must not use flame cutters, explosives or any other dangerous equipment or process without first obtaining written consent of the Company;

6.11.5 remove the Lot in compliance with all relevant legislation, regulations, codes of practice, guidance, orders, rules and other requirements of any relevant government or governmental agency or authority whether Parliamentary, statutory, parochial or local including (without limitation) in compliance with the Health and Safety at Work etc Act 1974, the Environmental Protection Act 1990, The Construction (Design and Management) Regulations 2015, Control of Substances Hazardous to Health Regulations 2002 (COSHH), and the Road Vehicle (Construction and Use) Regulations 1986 and any subsequent amendments thereof and all other health and safety and environmental legislation in existence at the time of the Sale. To the extent that such regulations are advisory rather than mandatory, the standard of compliance to be achieved by the Buyer shall be to the best industry practice;

In all cases arising under this General Condition 6.11 the costs of compliance shall be borne by the Buyer and the Buyer hereby indemnifies the Company and the Seller against all losses, costs, expenses, damages, liabilities, demands, claims, actions and proceedings which the Company and/or the Seller may incur arising directly or indirectly out of any breach by the Buyer to the provisions of this General Condition 6.11 and the Buyer shall make good any damage caused to (without limitation) other lots, the Location or to any property belonging to third parties, in removing any Lot under this General Condition 6.11.

6.12 The Company shall be entitled to halt the clearance of any Lot if in its absolute discretion the removal of a Lot is being carried out in an unsatisfactory manner. Where the clearance is halted by the Company, the Buyer must liaise with the Company's site representative as to how the Lot should be removed from the Location provided that the Buyer shall at all times ensure that it complies with its obligations under General Condition 6.11 above and the Company shall have no liability in this regard.

6.13 The Buyer shall provide evidence as and when requested by the Company of the Buyer's insurance policies in respect of the following insurances and at a minimum level of: 6.13.1 Public Liability Cover - limit Two Million Pounds (£ 2,000,000);

and 6.13.2 Employers Liability Cover - limit Ten Million Pounds

(£10,000,000); the Company reserves the right to vary the level of insurance cover stated above at any time, as and when required.

6.14 The Buyer shall provide to the Company a Risk Assessment & Method Statement complying with The Construction (Design & Management) Regulations 2015, COSHH or with any subsequent amendments thereof or such other legislation as shall from time to time be in force.

6.15 Electric, gas, water, steam and waste disconnections are the responsibility of the Buyer and MUST be carried out by an approved contractor following consultation with the site representative.

6.16 It is expressly brought to the Buyer’s attention that certain Lots could contain asbestos, noxious chemicals/ substances etc. which if not handled correctly during their removal could result in breach of Health & Safety at Work legislation and/or Control of Substances Hazardous to Health Regulations or other statutory requirements.

6.17 Any fluids, gases and/ or waste remaining in plant and machinery are the responsibility of the Buyer and MUST be removed from the Location strictly in accordance with any applicable statutory requirements.

6.18 The Buyer must use safe and lawful means of removing the Lot, must comply with all current statutory requirements and regulations including those relating to the disposal and removal of waste, and if required, satisfy the Company in relation to their removal procedures; in particular, the removal of waste materials must be undertaken by an approved and licensed contractor to an approved waste management site.

6.19 The Buyer acknowledges and agrees to give a written undertaking pursuant to section 6(8) of the Health & Safety at Work Act 1974 when required to do so.

6.20 It is expressly brought to the attention of the Buyer that certain types of plant or main service installations could contain asbestos, dangerous chemicals etc. which, if not handled correctly during their removal from site, could be in breach of the Health & Safety at Work Act 1974, the Control of Asbestos at Work Regulations 2002, the Asbestos (Licensing) Regulations as amended and the Control of Substances Hazardous to Health Regulations 1988 (COSHH) or any other current legislation covering the use of such substances in a working environment.

6.21 It is the Buyers or their removal contractors responsibility (i.e. Police, Ministry of Transport, Local Authority) to transport off site long/ wide loads, within sufficient time prior to the commencement of clearance period as stated in the Special Notes & Conditions.

6.22 The Buyer shall indemnify the Company and the Seller against any loss, damages, expenses, claims or liabilities arising directly or indirectly from the possession or use of the Lot after title to the Lot has passed to the Buyer but before it is removed from the Location.

6.23 All Lots are sold on the understanding that the Seller does not represent them as being in a condition which makes them suitable for domestic use. If any Lots are intended for domestic use the Buyer must ensure that they comply with the requirements of the Furniture & Furnishings (Fire) (Safety) Regulations 1988 and any subsequent amendments thereof or such other relevant statutory requirements or regulations as shall from time to time be in force.

6.24 The Buyer undertakes to comply with the provisions of the Data Protection Act 1998 in processing data held by them in connection with any Lot.

7. Default by the Buyer 7.1 If at any time the Buyer has failed to pay the sums specified in General

Condition 5 above in full by the due date for payment, or to remove any Lot purchased by the Clearance Date and Time specified in the Special Conditions the Seller may rescind the Sale of that Lot, in which case any Deposit shall be forfeit, and that Lot may be resold.

7.2 If the Seller has rescinded the Sale but the Buyer has removed the Lot purchased, the Seller shall be entitled without previous notice to enter upon any premises where he believes the Lot to be and remove it.

7.3 If the Seller has rescinded the Sale and the Lot has been resold by the Auctioneer and/or the Company or by the Seller, the Buyer shall reimburse the Seller with any shortfall where:- 7.3.1 the resale price less the Sale price; and 7.3.2 the costs incurred by the Seller incidental to the resale.

7.4 If the Buyer fails to remove any Lot by the Clearance Date and Time specified:- 7.4.1 the Seller may remove the Lot from the Location and leave it

outside at the Buyer’s risk in all respects; 7.4.2 the Seller may charge the Buyer for the reasonable costs of

storage; 7.4.3 the Seller may charge the Buyer rent, taxes, men's wages and

expenses incurred as a result of the Lot(s) remaining at the Location; and

7.4.4 the Buyer shall indemnify the Seller against any loss, damages, expenses, claims or liabilities incurred by the Seller arising from the Buyer’s failure to remove the Lot from the Location.

8. Acknowledgements and Exclusion of Warranties 8.1 The Buyer acknowledges that in agreeing to purchase any Lot he is not

relying on any warranties or representations made by the Seller or the Company or any of their employee’s agents or representatives. All representations, warranties and conditions, express or implied, statutory or otherwise in respect of all and any of the Lots are expressly excluded and without limitation any warranties and conditions as to title, quiet possession, satisfactory quality, fitness for purpose and description are excluded to the fullest extent as permitted by law.

8.2 The Buyer further acknowledges that neither the Sellers nor the Company shall in any circumstances be liable to or to compensate the Buyer nor shall the Buyer be entitled to rescind the Sale or reject any Lot for an error omission or misstatement contained in the Catalogue and/or in the Special Conditions.

8.3 The Buyer also acknowledges that:- 8.3.1 all the Lots are purchased on the basis that risk of good title to

all or any of them passing to the Buyer is at the Buyer’s risk and without limitation the Lots are sold subject to any claims, liens, distraint and execution and subject to all leasing, hire or hire purchase agreements and reservation of title claims (if any) in respect of them;

8.3.2 if it shall be found that the Seller does not have title to all or any of the Lots the Buyer shall have no right to rescind, avoid or vary this agreement or to claim damages or a reduction in the price paid or payable;

8.3.3 anything found in, under, near or in any Lot which is not specifically included in the description of the Lot remains the property of the Seller;

8.3.4 any intellectual property rights or software subsisting in a Lot may be third party property and as such the Seller and/or the Company may be unable to effect transfer. The Buyer will not be authorised to use intellectual property rights or software and any such use or transfer shall be at the Buyers sole risk.

8.4 The Buyer undertakes that it shall ensure that any vehicle comprised in any Lot is in a roadworthy condition in accordance with the Road Vehicle (Construction and Use) Regulations 1986 and any subsequent amendments thereof or such other relevant regulations as shall from time to time be in force before using it on a public road. It is the Buyer’s responsibility to remove Company logos and lettering from vehicles. Odometer readings are not warranted.

8.5 The Buyer acknowledges that any item of plant, machinery or equipment contained in the Lot(s) may not necessarily comply with any statutory requirements or regulations governing the use of that plant, machinery or equipment in their working environment. Neither the Seller nor the Company shall incur any liability to the Buyer because of any default or defect in all or any of the Lots. Buyers are entirely responsible for ensuring that the use of any item of plant, machinery or equipment does not contravene any health and safety and environmental legislation in existence at the time of the Sale.

8.6 The Buyer acknowledges and agrees that the Company is acting only as agent of the Seller and it is expressly agreed and declared that no personal liability in connection with the Sale of any Lot or otherwise shall fall on the Company and the Buyer shall indemnify the Company against all and any liabilities arising under or in connection with the Sale of any Lot. Insolvency Practitioner(s), including Administrative Receiver(s), Administrator(s) and Liquidator(s) act as agent(s) for the Seller without personal liability and shall incur no personal liability whatsoever in relation to a Sale or pursuant to any document relating thereto.

8.7 The Buyer acknowledges and agrees that the Auctioneer does not represent any lot as being in a condition which makes it suitable for domestic use.

8.8 The Buyer acknowledges and agrees that the Auctioneer does not have nor professes to have any expert or other knowledge of any Lots sold.

8.9 The Buyer acknowledges and agrees that the Auctioneer is hereby excluded from any liability the Auctioneer might otherwise incur.

8.10 The Buyer acknowledges and agrees that no liability shall attach to the Auctioneer either in contract or in tort for loss of injury or damage legal or otherwise sustained by the Seller, any bidder, the Buyer or any other person by reason of any defect in any Lot sold, latent or otherwise, or any defect or danger of the premises where the Auction is held.

8.11 The Buyer agrees that the General Conditions and the exclusions which they contain are fair and reasonable bearing in mind that:- 8.11.1 the Buyer must rely absolutely on the Buyer’s own opinion

and/or professional advice concerning the quality, state, condition, performance and functionality of the Lots any right, title or interest which is sold under the terms of these General Conditions, their fitness and suitability for any particular or any purpose, the possibility that some or all of them may have defects not apparent on inspection and examination including, without limitation, the presence of contamination and the possibility that the Buyer may not acquire title and the fact that the Buyer would have no remedy under this Agreement should that happen;

8.11.2 the Buyer has available to it skilled professional advice and on that basis agrees to purchase a Lot for a consideration calculated to take into account amongst other things the risk to it represented by the fact that the parties believe that all the exclusions and limitations set out in these General Conditions would be recognised as being fully effective by the Courts and the Seller making it clear that it would not have agreed to sell any Lot on any other basis except for a higher consideration;

8.11.3 the Buyer has been given every opportunity which might reasonably be expected to examine and inspect the Lots.

8.12 Notwithstanding anything else in these General Conditions, the Seller’s and the Company’s total liability under or in connection with the Sale of any Lot, whether in respect of breach of contract, tort (including negligence), breach of statutory duty or otherwise, including consequential loss, shall be limited in aggregate to the price paid for the Lot or if no price has been paid then the higher of the market value or reserve price for the Lot. This General Condition 8.12 does not apply to liability for death or personal injury.

8.13 The Buyer acknowledges that a Sale by Auction is not a consumer sale for the purposes of the Sale of Goods Act 1979 (as amended by the Sale and Supply of Goods Act 1994) and the Unfair Contract Terms Act 1977 and the Buyer shall not seek to rely upon and conditions or warranties implied thereby or by any other legislation.

9. Entire Agreement 9.1 The parties agree that these General Conditions, the Special Conditions

and the Catalogue constitute the entire agreement between them and supersedes all previous drafts agreements arrangements and understandings between them, whether oral or written.

10. Jurisdiction 10.1 Each party irrevocably agrees that the courts of England and Wales

shall have exclusive jurisdiction to settle any dispute or claim arising out of or in connection with these General Conditions or its subject matter or formation (including non-contractual disputes or claim).

SPECIAL CONDITIONS OF SALE

Seller: On the instructions of the Landlord and a Major Finance Company following the closure of the Nathan Furniture/ Sutcliffe Furniture UK Manufacturing Facility Location: Frostholme Mill, Burnley Road, Cornholme, Todmorden, West Yorkshire, OL14 7ED, UK Viewing: From 10am to 4pm Monday 26 and Tuesday 27 June 2017 or by appointment Access to the Location is allowed on the understanding that all persons attend the Location entirely at their own risk and are responsible for and will indemnify the Seller and the Company against any losses damage or claims occasioned by their presence at the Location. Children under the age of 16 will not be allowed access to the Location. Registration: All bidders must register their details with the Company and provide identification where required. In the case of Live Auctions by way of the registration form provided at the Live Auction or in the Catalogue and in the case of Online Auctions, online at the Website www.bidspotter.co.uk and www.sw.co.uk/auctions. Administration Fee: We reserve the right to charge a fee of £25.00 plus VAT to change name and address details on invoices. To avoid this fee please ensure that the information is correct at point of registration on Bidspotter. Bidding: The General Conditions and the Special Conditions apply to all Sales by way of Auction, private treaty and tender and in the case of any Bids placed by way of an Online Auction stress that all Bidders must read and understand Bidspotter’s terms and conditions of registration at www.bidspotter.co.uk and www.sw.co.uk/auctions. At the close of the timed Online Auction Sale final Bid figures will be submitted to the Seller for its approval and any Bid shall be subject to approval and acceptance by the Company and/or the Seller. No Bid may be withdrawn and the Company/Seller does not bind himself to accept the highest Bid or any other Bid placed in the course of the Online Auction Sale. Buyer's Premium: Buyers will pay a Buyer's premium of 15% (plus VAT) of the purchase price for each Lot purchased whether by Auction or, private treaty or tender. The Buyer's Premium is payable by the Buyer to the Company in accordance with the General Conditions and, for the avoidance of doubt is payable in addition to the purchase price for the Lot. The Buyer's Premium is not negotiable and is payable by all Buyers. Deposit: Buyers shall pay a deposit of 25% (plus VAT) of the purchase price for each Lot purchased as requested by the Company pursuant to the General Conditions and these Special Conditions. Payment: All Lots shall be paid for in full within 48 hours (two working days) of the invoice date and shall be at the Buyer's risk immediately upon the conclusion of the sale. Telegraphic Transfer - Bank details for telegraphic transfer: Account: Sanderson Weatherall LLP Bank: Allied Irish Bank (UK) plc, Vantage Point, Hardman Street, Spinningfields, Manchester Sort Code: 23-83-96 Account Number: 03526066 SWIFTCODE – AIBKGB2L

IBANGB28AIBK23839603526066 Cash - In view of Money Laundering Regulations the Company reserves the right to refuse payment in cash. Payments in cash of more than £7,500 will not, in any circumstances, be accepted.

http://www.bidspotter.co.uk/


http://www.bidspotter.co.uk/


Bankers Draft/ Cheques: (made payable to Sanderson Weatherall LLP) will only be accepted on the basis that any Lots are not removed until cleared funds are in the Company's client account. Debit Cards: The Company accepts debit cards for payment of invoices (maximum £2,500). The Company does not accept credit cards for payment of invoices. All sums payable under the General Conditions and these Special Conditions are exclusive of any applicable VAT for which the Buyer shall be additionally liable to pay to the Company. Registrations / Licenses / Transfer Fees: Purchaser is responsible for ongoing / transfer costs. Administration Fee: We reserve the right to charge a fee of £25.00 plus VAT to change name and address details on invoices. To avoid this fee please ensure that the information is correct at point of registration on Bidspotter.

Clearance: Small removable lots should be moved by 4pm FRIDAY 7 JULY 2017. All lots must be cleared without fail by 4pm FRIDAY 14 JULY 2017 such date and time being the Clearance Date and Time as referred to in the General Conditions, REMOVAL OF ALL LOTS WILL BE STRICTLY BY APPOINTMENT, please see the Company's invoice for contact details. Collection from site is the Buyer’s responsibility, the Company/Seller do not provide a packing/ delivery service. Reserve Removal: Lots sold subject to a reserve removal will either be indicated in the Catalogue with the date of availability or will be identified by the Auctioneer at the point of Sale. A Deposit will be payable as with other lots but in this instance payment in full can be left until five (5) working days prior to availability. Unless specified to the contrary such Lots must be removed from the Location not later than the Clearance Date and Time specified for final removal in these Special Conditions. Fire Alarm: In case of a fire alarm all visitors and contractors are to exit buildings and report to the Muster Point. Smoking: No smoking on site. Food and Drink is only to be consumed in designated areas. Safety: All persons including Buyers, their employees, agents, representatives and contractors are reminded that they are responsible for their own safety on site and enter at their own risk and should take the precaution of wearing protective clothing as appropriate. Finance: If Buyers wish to purchase Lots with the help of a finance company they should make arrangements well in advance of the Sale to ensure that they are able to make payment in accordance with the General Conditions. Overseas Buyers: Overseas Buyers should ensure that the country to which the items are destined:-

holds no import restrictions on the goods to be purchased;

has no import licence restrictions or a restriction on currency allocation;

has no prolonged inspection procedure which might cause excess delay or refusal in allowing your goods to be imported.

Overseas Buyers will receive a fully descriptive invoice in order that they may arrange payment as soon as possible with the Company's bank, Allied Irish Bank (UK) Plc, Vantage Point, Hardman Street, Spinningfields, Manchester. Overseas Buyers should employ a suitable freight forwarding organisation. Please note that many of the machinery removal companies in the United Kingdom are not necessarily freight forwarders. The [Seller and/or Company] will be pleased to advise accordingly.

The Company makes no representation and accepts no liability whatsoever to any Buyer in respect of the issuance or validity of any exportation or importation permits or the existence and exercise of exportation or importation regulations or any compulsory purchasing regimes. VAT Payments and Returns: All overseas Buyers (EU and non EU) will be charged VAT at the current rate on each Lot purchased. This will be refunded to the overseas Buyer as soon as the Seller receives a copy of the bill of lading as proof of export, providing this documentation is received within 3 months of the sale date. The Seller is unable to refund the

VAT on the Buyer’s Premium to non EU countries.

V.04.07.16

Lot Description

Please note:- The Galvanised Steel Dust Extraction Ducting is available for sale by private treaty – please see a member of the auctioneer’s staff for further details. All flexible dust extraction dusting is included with the sale of woodworking machinery where applicable

1 Holz-Her EVOLUTION 7405 CNC PROCESSING CENTRE, serial No. 199/1-407, year of manufacture 2014, with ducting to electric pneumatic slide – NOTE collection of this item will be by appointment only week commencing Monday 10 July. A charge will be levied for craneage / loading (this charge will be posted on Bidspotter in due course). Please note the purchaser is required to decommission & skate to the lift out area.

2 Biesse Rover C6.90 CNC MACHINING CENTRE, serial no. 89183, year of manufacture 2011, with safety fencing and flexible ducting – NOTE collection of this item will be by appointment only week commencing Monday 10 July. A charge will be levied for craneage / loading (this charge will be posted on Bidspotter in due course). Please note the purchaser is required to decommission & skate to the lift out area.

3 Biesse Rover 27 CNC MACHINING CENTRE, serial no. 13169, year of manufacture 2001, with flexible ducting and safety fencing – NOTE collection of this item will be by appointment only week commencing Monday 10 July. A charge will be levied for craneage / loading (this charge will be posted on Bidspotter in due course). Please note the purchaser is required to decommission & skate to the lift out area.

4 CMS TRIAX 5.70/ B-2 ATC+2GF CNC MACHINING CENTRE, serial no. 2535, year of manufacture 2000, with CMS control & waste conveyor and flexible ducting – NOTE collection of this item will be by appointment only week commencing Monday 10 July. A charge will be levied for craneage / loading (this charge will be posted on Bidspotter in due course). Please note the purchaser is required to decommission & skate to the lift out area.

5 Maggi BS21 BORING SYSTEM, year of manufacture 2015

Lot Description

6 Essepigi RAPID FOUR HEAD MITRE CUTTING & BORING MACHINE, serial no. 22269, year of manufacture 2002, with flexible ducting

7 Balestrini CP HSC CNC PROFILE SHAPING MACHINE, serial no. 14619, year of manufacture 2002, with flexible and immediate ducting – NOTE collection of this item will be by appointment only week commencing Monday 10 July. A charge will be levied for craneage / loading (this charge will be posted on Bidspotter in due course). Please note the purchaser is required to decommission & skate to the lift out area.

8 Balestrini PICO CN PROFILE SHAPING/ TENONING MACHINE, serial no. AY184G9, year of manufacture 2008, with flexible ducting

9 Brandt OPTIMAT KTD 720 SINGLE SIDED EDGE BANDING MACHINE, year of manufacture 2015

10 Holz-Her ACCORD 1462V CNC SINGLE SIDED EDGE BANDING MACHINE, serial no. 101/ 0404, year of manufacture 2004, with ducting to first gate – NOTE collection of this item will be by appointment only week commencing Monday 10 July. A charge will be levied for craneage / loading (this charge will be posted on Bidspotter in due course). Please note the purchaser is required to decommission & skate to the lift out area.

10A Scissor Lift Platform, approx. 1.7m x 1.2m. Please note – a nominal contribution towards making good the hole in the floor following the removal of this lot will be charged to the purchaser. Further information will be posted on Bidspotter in due course.

10B Ligmatech ZHR 01/L BOOMERANG RETURN TABLE, serial no. 0-305-99-0862, year of manufacture 2004 with belt take off conveyor, 800mm wide on belt, 6m centres long and 880mm wide roller conveyor, 1.9m long

11

Lot Description

12 Costa K3 C1350 1350MM WIDE BELT SANDING MACHINE, serial no. A61211LR1, year of manufacture 2007, with centrifugal fan and ducting to valve – NOTE collection of this item will be by appointment only week commencing Monday 10 July. A charge will be levied for craneage / loading (this charge will be posted on Bidspotter in due course). Please note the purchaser is required to decommission & skate to the lift out area.

12A Three Sand Belts

13 Costa AW1CC 1350MM WIDE BELT SANDING MACHINE, serial no. A20418LR1, year of manufacture 2002,with centrifugal fan and ducting to first support – NOTE collection of this item will be by appointment only week commencing Monday 10 July. A charge will be levied for craneage / loading (this charge will be posted on Bidspotter in due course). Please note the purchaser is required to decommission & skate to the lift out area.

14 Costa S2/ CTT 1350MM WIDE BELT SANDING MACHINE, serial no. 980605/ DPI, year of manufacture 1998, with centrifugal fan and ducting to first bend – NOTE collection of this item will be by appointment only week commencing Monday 10 July. A charge will be levied for craneage / loading (this charge will be posted on Bidspotter in due course). Please note the purchaser is required to decommission & skate to the lift out area.

15 Weinig UNIMAT 1000 THROUGHFEED PLANING & MOULDING MACHINE, year of manufacture 2003, with Weinig EMII feed unit, serial no. 98069, with ducting to electric pneumatic slide – NOTE collection of this item will be by appointment only week commencing Monday 10 July. A charge will be levied for craneage / loading (this charge will be posted on Bidspotter in due course). Please note the purchaser is required to decommission & skate to the lift out area.

16 Friulmac MP3-4000 OUT FEED CONVEYOR, serial no. 3462A, year of manufacture 2003

16A Two Edmo Scissor Lift Tables, each approx. 1.2m x 820mm. Please note – a nominal contribution towards making good the hole in the floor following the removal of this lot will be charged to the purchaser. Further information will be posted on Bidspotter in due course.

17 Weinig OPTI-CONTROL TOOL SETTER

Lot Description

18 Giben PRISMA 1SP 3.5M WIDE CNC PANEL SAW, serial code. 479.97.380, year of manufacture 1997, with immediate ducting and safety fencing – NOTE collection of this item will be by appointment only week commencing Monday 10 July. A charge will be levied for craneage / loading (this charge will be posted on Bidspotter in due course). Please note the purchaser is required to decommission & skate to the lift out area.

19 TVL 170KG JIB, with SWF 250kg Hoist

20 TVL D 2868 VACUUM LIFT, year of manufacture 2010

20A Scissor Lift Platform, approx. 2.6m x 1m. Please note – a nominal contribution towards making good the hole in the floor following the removal of this lot will be charged to the purchaser. Further information will be posted on Bidspotter in due course.

20B Scissor Lift Platform, approx. 1.7m x 900mm. Please note – a nominal contribution towards making good the hole in the floor following the removal of this lot will be charged to the purchaser. Further information will be posted on Bidspotter in due course.

21 Josting ZFS2800 CNC VENEER GUILLOTINE, serial no. 10695, year of manufacture 1998, with safety fencing – NOTE collection of this item will be by appointment only week commencing Monday 10 July. A charge will be levied for craneage / loading (this charge will be posted on Bidspotter in due course). Please note the purchaser is required to decommission & skate to the lift out area.

22 Josting QFS1000 VENEER GUILLOTINE, serial no. 8587

23 Kuper FW1150 VENEER STITCHING MACHINE, serial no. 2602 7867

24 SLIDING TABLE HYDRAULIC VENEER CLICKING PRESS, with two tables each approx. 2.6m x 1.25m

25 Gibbs RADIO FREQUENCY LIPPING PRESS, with PYE RF 6/13 RF generator

26 Schubert THREE RAM VENEER PRESS, with Whiteley 6/13 HF generator and three tables, each 800mm x 1.27m, extraction canopy and ducting

26A Approx. Nine Forms

27 Osama S2R 1300 ROLLER GLUEING MACHINE, serial no. 2392, year of manucttfacture 1997, with extraction ducting canopy and ducting (understood to require attention)

28 Pinheiro AMA-300A MULTI RIP SAW, serial no. 471, with Wadkin Bursgreen roller table and side discharge, with flexible ducting

Lot Description

29 Stenner Roller Infeed

30 Scissor Lift Platform, approx. 6m x 1.4m

31 Wadkin Bursgreen AUTO SAW, with feed conveyor, steel support frame, access platform, and 120mm dia. ducting (to main run only)

32 Dimter OPTI CUT 304R CROSS CUT SAW, serial no. 10-6842, with power feed unit & belt conveyor, belt conveyor delivery, flexible ducting, pneumatic side discharge, CNC control panel & waste incline conveyor

33 Wadkin CJ4 HYDRAULIC CROSS CUT SAW, serial no. 4046, with flexible ducting, roller infeed & outfeed

34 Wadkin PU STRAIGHT LINE EDGING MACHINE, serial no. 312, test no. 26417, with flexible ducting

35 Kuper Muhle HEAVY DUTY THICKNESSING MACHINE, serial no. 10320, 500mm wide in acoustic housing, with immediate ducting

36 Christy & Norris 24x12 PULVERISER/ HAMMERMILL, serial no. 48030, with conveyor infeed in acoustic housing and immediate ducting only

37 400mm Wide Belt Conveyor, approx. 20m long

38 DOUBLE ENDED SAW, approx. 1.9m max cutting width

39 White SH VERTICAL BANDSAW, 850mm deep-in-throat, with immediate ducting only

40 Wadkin DR VERTICAL BANDSAW, serial no. 655S, test no. SC5393, 850mm deep-in-throat, with immediate ducting only

41 Sagar SCA10 VERTICAL BANDSAW, serial no. D6549, 720mm deep-in-throat

42 Wadkin DS VERTICAL BANDSAW, serial no. 201S, test no. SC3152, 720mm deep-in-throat, with flexible ducting

43 Wadkin Bursgreen PULLOVER 350MM DIA. CROSS CUT SAW, with flexible ducting

44 Danckaert 400MM DIA. SURFACE PLANING MACHINE, serial no. 18736, with flexible ducting

45 Danckaert 350MM DIA. DIMENSION SAWBENCH, serial no. D753, machine no. DC/N247

45A Wadkin ROUTER, serial no. 40605, approx. 600mm deep-in-throat

46 Black & Decker 250MM DIA. PEDESTAL GRINDING MACHINE

47 Maggi / Ninfa RC-3 SPINDLE SANDING MACHINE, serial no. 1258, with fitted two power feed units, with flexible ducting

Lot Description

48 Wadkin EQ VERTICAL SPINDLE MOULDING MACHINE, serial no. 1522, test no. 61738, with power feed unit, with flexible ducting

49 Ruco DOUBLE HEAD CIRCULAR CROSSCUT SAW, with end saw and flexible ducting

50 OMEC F8 DOVETAILING MACHINE, serial no. 030031, year of manufacture 2002, with flexible ducting

51 White FR BELT SANDING MACHINE, with flexible ducting

52 Jakob Larsen EDGE SANDING MACHINE, with Holz-Her ETS power feed unit and flexible ducting

53 RYE R90E 2C ROTARY TABLE SHAPING MACHINE, serial no. 268 93, with flexible ducting – NOTE collection of this item will be by appointment only week commencing Monday 10 July. A charge will be levied for craneage / loading (this charge will be posted on Bidspotter in due course). Please note the purchaser is required to decommission & skate to the lift out area.

54 Alfaro VERTICAL SINGLE PROFILE SANDING MACHINE, with flexible ducting

55 Bacci MOD TWIN SLOT MORTICE PROFILING MACHINE, serial no. 2804, year of manufacture 1997

55A Wadkin LSA ROUTING MACHINE, serial no. 1778, test 27284, with flexible ducting

56 Bacci MOD TWIN SLOT MORTICE PROFILING MACHINE, serial no. 3723, year of manufacture 2006, with flexible ducting

57 Danckaert BELT EDGE SANDING MACHINE, serial no. C 872, machine no. IP/93

58 RYE CC/2 HORIZONTAL PNEUMATIC PRESS, machine no. 146

58A Dexter Bench, approx. 900mm x 900mm, fitted saw blade

59 Smith HORIZONTAL PNEUMATIC PRESS

60 RYE BS/4 DOUBLE ENDED SPINDLE, serial no. 202, with immediate ducting

61 RYE DOUBLE ENDED SPINDLE, serial no. 63484/1, with immediate ducting

62 Meddings FPS DOUBLE ENDED SPINDLE, serial no. 17326/M2 533141, with immediate ducting

63 Meddings FSM DOUBLE ENDED SPINDLE, with immediate ducting

64 Camam KNURLING MACHINE

65 LVG VERTICAL BELT SANDING MACHINE, with immediate ducting

66 HORIZONTAL BELT SANDING MACHINE, with immediate ducting

Lot Description

67 Wadkin Bursgreen BGA2 BELT SANDING MACHINE, ref no. 67993, with flexible ducting

68 Holytek PW 12H DOUBLE ENDED OSCILLATING BELT SANDING MACHINE, serial no. 231, year of manufacture 2009

69 Essepigi JNSER1T 600 TWIN HEAD DOWEL INSERTING MACHINE, serial no. 0153, with vibratory hopper feed unit

70 Lower Tops/ NKK TWIN VERTICAL SPINDLE POLISHING MACHINE, serial no. 10524, year of manufacture 2004, with flexible ducting

71 Priess Horstmann HINGING & BORING MACHINE, with pneumatic clamping

72 Hymmen Proficoater PFC-S ELX-S LACQUER ROLLER COATING MACHINE, serial no. 513104-20, year of manufacture 1999, with Hack Emack KTR2061 curing tunnel, serial no. 2056 F 03, year of manufacture 1999 and immediate ducting

73 Wadkin LS ROUTING MACHINE, serial no. 3777, with flexible ducting

74 *Scissor Lift Platform, approx. 3.14m x 1.6m, with hydraulic power pack transfer unit, two lengths roller conveyor, roller ball conveyor (on scissor lift) (Please Note: The final highest bid on this lot will only be accepted if the accumulative total for lots 74-81 is higher than the final highest bid on combination Lot 82)Please note – a nominal contribution towards making good the hole in the floor following the removal of this lot will be charged to the purchaser. Further information will be posted on Bidspotter in due course.

75 *Osama SP/PS-1600 BRUSH ROLLERS, serial no. 8064, year of manufacture 2005, 1.63m wide on roller, with flexible ducting (Please Note: The final highest bid on this lot will only be accepted if the accumulative total for lots 74-81 is higher than the final highest bid on combination Lot 82)

76 *Hymmen TLA1400 GLUE ROLLER, serial no. 0180-40772-1, year of manufacture 2006, with outfeed conveyor, extraction canopy and centrifugal fan (Please Note: The final highest bid on this lot will only be accepted if the accumulative total for lots 74-81 is higher than the final highest bid on combination Lot 82)

77 *Powered Roller Feed Conveyor (Please Note: The final highest bid on this lot will only be accepted if the accumulative total for lots 74-81 is higher than the final highest bid on combination Lot 82)

Lot Description

78 *1.4m Wide Rubber Belt Conveyor, 3.4m centres long (Please Note: The final highest bid on this lot will only be accepted if the accumulative total for lots 74-81 is higher than the final highest bid on combination Lot 82)

79 *Wemhoner VSF HEATED THROUGHFEED VENEER PRESS, serial no. 5740571 (Please Note: The final highest bid on this lot will only be accepted if the accumulative total for lots 74-81 is higher than the final highest bid on combination Lot 82)

80 *Werner Vollmer Oil Fired Heater, serial no. 822267, (Please Note: The final highest bid on this lot will only be accepted if the accumulative total for lots 74-81 is higher than the final highest bid on combination Lot 82)

81 *Amstrup Pallet Stacking Machine, with feed conveyor (Please Note: The final highest bid on this lot will only be accepted if the accumulative total for lots 74-81 is higher than the final highest bid on combination Lot 82)

82 *Combination Lot, lots 74-81 offered for sale as a one lot contract (Please Note: The final highest bid on this lot will only be accepted if the accumulative total for lots 74-81 is higher than the final highest bid on combination Lot 82)

83 Drilling Jig, with bench

84 Lamont PNEUMATIC MITRE CRAMPING FRAME

85 Lamont PNEUMATIC MITRE CRAMPING FRAME

86 Lamont VERTICAL CLAMPING TABLE

87 Clamp Table

88 Single Vertical Spindle, with flexible ducting

89 LASM Volpato LBK 200 EDGE SANDING MACHINE, serial no. 1764214

90 LASM Volpato LBK 200 EDGE SANDING MACHINE, serial no. 1764213

91 Ligmatech Optimat MPH10 PNEUMATIC CRAMPING MACHINE, serial no. 0-306-09-3957, year of manufacture 1998 – NOTE collection of this item will be by appointment only week commencing Monday 10 July. A charge will be levied for craneage / loading (this charge will be posted on Bidspotter in due course). Please note the purchaser is required to decommission & skate to the lift out area.

92 Ramarch PN30 Pneumatic Cramping Machine, serial no. 5198

93 Danckaert Belt Sanding Machine

94 Walkers Horizontal Press

95 Lantech 50mm Auto Stretch Pallet Wrapping Machine, serial no. QM010864

Lot Description

96 Electro Hydraulic Waste Bailing Machine

97 ISS Four Room Dry Back Spray Booth Facility

98 Extraction / Air Handling Ducting

99 Gas Fired Air Heating Unit

100 Gas Fired Air Heating Unit

101 Kremlin Rexson 30:1 Pump

102 Dry Back Spray Booth (Booth 4)

103 Paint Spray Pressure Pot & Spray Head

104 Kremlin 16-120F Pump, serial no. 03H1463




108 Kremlin Pneumatic Pump


110 Pneumatic Pump & Spray Head

111 Heyes 1.4m Flameproof Fluorescent Light


113 FLP 1.65m Flameproof Fluorescent Light




117 Two Paint Spray Pressure Pots

118 Pneumatic Paint Stirring Unit


120 DeVilbiss Finishline Paint Spray Head

121 1.52m Flameproof Fluorescent Light

122 Schubox CATALYTIC INFRA-RED DRYING TUNNEL



125 Schubox CATALYTIC INFRA-RED DRYING TUNNEL



128 Finiture CD1-170-5-2/SP Drying Tunnel, serial no. 106-4, year of manufacture 2004, with motorised conveyors



131 Kremlin 10.14 Pump

132 Kremlin 10.14 Pump



134A Kestrel Spray Head


Lot Description


137 DeVilbiss Finishline Paint Spray Head



140 Pneumatic Pump

141 Sectional Galvanised Steel Dry Back Spray Booth (Booth 10)

142 Kremlin Pneumatic Pump, with Rexson spray head

143 Pneumatic Paint Spray Head

144 Pneumatic Paint Spray Head

145 Dry Back Spray Booth

146 Air Plant Galvanised Steel Three-Bag Dust Collection Unit

147/ 155

STORAGE AREA

156 Dominon Vertical Bandsaw, 590mm deep-in-throat

157 Edmo 3000kg Cap Electro/Hydraulic Scissor Lift Table, 1.7m x 900mm

158 Edmo Scissor Lift Table, 1.3m x 700mm

159 Mobile Steel Framed Clamping Frame, 1.22m x 530mm x 900mm in gap

160 Steel Framed Clamping Table, 1.82m x 820mm

161 Steel Bench, with clamping equipment

162 Blum M5IP1000.50 Minidrill, serial no. SM0341, with pneumatic clamps and steel bench

163 Black & Decker 10in Dia. Super Duty Double Ended Bench Grinder, with stand

163A Five Rise Alloy Step Ladder

163B Four Assorted Steel Racks, (with shelving as fitted) (no contents included - reserve removal until contents cleared)

164/ 170

BAY ONE

171 Plywood Boards, as set out in one area, each approx. 890mm x 590mm

172 Mobile Timber Bench, approx. 780mm x 1.34m

173 Single Sided Film Application A-frame, approx. 1.18m wide

174 BT Rolatruc Hand Hydraulic Pallet Truck, with forks, 1.22m long

175 Timber Bench, approx. 1.7m x 700mm with partitioning (contents not included)

176 Bench, approx. 1.4m x 830mm

177 Mobile Timber Framed Bench, approx. 1.22m x 1.085m (contents not included)

Lot Description

178 Timber Bench, approx. 1.4m x 510mm with folding extension (contents not included)

179 Mobile Steel Framed Multi-Tier Stock Rack, approx. 1.5m wide (contents not included)

180 Timber Bench, approx. 1.27m x 620mm (contents not included)

181 Timber Bench, approx. 1.68m x 1.22m (contents not included)

182 Timber Bench, approx. 1.22m x 1.65m (contents not included)

183 Steel Frame Bench, approx. 1.7m x 1.22m (contents not included)

184 Timber Bench, approx. 1.22m x 500mm

185 Timber Bench, approx. 760mm x 1.06m (contents not included)

186 Cage Pallet, approx. 1.3m x 820mm (contents not included)

187 Three-Tier Single-Bay Rack, (contents not included)

188 Two-Tier Single-Bay Rack, (contents not included)

189 Three Mobile Timber Framed Benches

190 Single-Bay Two-Tier Rack, (contents not included)

191 Perforated Angle Steel Rack

192 Timber Bench, with timber rack (contents not included)

193 Timber Bench, approx. 2.05 x 1m

194 Hand Hydraulic Pallet Truck, with forks 1.22m long

195 Timber Platform Trolley, approx. 3.05m x 910mm

196 Welded Steel Stand, approx. 1.96m x 820mm x 630mm high

197

198 Plastic Box Truck, approx. 1.37m x 800mm x 700mm deep

199 Hand Hydraulic Pallet Truck, with forks approx. 1.22m long

200 11 Cage Pallets, comprising sizes mainly 1.9m x 800mm x 780mm deep and 1.2m x 800mm x 760mm deep with residual contents

201 Mobile Timber Work Bench, approx. 1.85m x 720mm, fitted joiner’s vice

202 Assorted Roller and Roller Ball Conveyoring, in one area

203/ 210

BAY TWO

211 Dexion Speedlock Three-Tier Single-Bay Pallet Rack

212 Record Drill Stand, with timber stand

Lot Description

213 Residual Loose Contents of Office, including 2 filing cabinets, chairs and heater, (excluding computers)

214 Residual Loose Contents of Office, including chair, drawer pedestal and side table, (excluding computers)

215 Display Stand

216 Nilfisk GS83 Portable Industrial Vacuum cleaner, serial no. 30097, 3000W, 240V

216A Redashe Retracting Compressed Air Reel

216B Redashe Retracting Compressed Air Reel

217 Mainly 500mm Wide Roller Conveyoring, with two radius sections and two roller ball sections.

218 Mainly 500mm Wide Roller Conveyor, with two roller ball sections

219 Mainly 500mm Wide Roller Conveyoring, with four roller ball sections

220 Horizontal Welded Steel Air Receiver

221 Mobile Bench / Cupboard (contents not included)

222 Double Door Cupboard (contents not included)

223 Assorted Inspection Equipment, as set out

224 Two 3M Pneumatic Random Orbital Sanders



227 Three 3M Pneumatic Random Orbital Sanders

228 Three Pneumatic Drills


230 Nitto Kohki FS-100C Pneumatic Sander

231 Assorted Clamps, as set out

232 Two Pneumatic Staplers



235 Rapesco B7 14/50 CT Pneumatic Stapler

236 Two Rapesco C9725VHH Pneumatic Staplers


238 Makita 3612BR Portable Electric Router, 240V

239 Assorted Hammers and Mallets, as set out



242 Two Pneumatic Drills



Lot Description






250 Pneumatic Stapler


252 Two Tacwise Pneumatic Staplers

253 Two BAE Pneumatic Staplers

254 Two Tacwise Pneumatic Staplers

255 Submersible Pump, 240V

256 Timber Bench, approx. 2m x 1.2m (contents not included)(reserve removal until contents cleared)

257 Timber Bench, approx. 1.85m x 1.05m (reserve removal until contents cleared)

258 Mobile Timber Bench, approx. 1.8m x 920mm, (contents not included)(reserve removal until contents cleared)

259 Stillage Truck

260 Approx. 70 Timber Stillages, each approx. 900mm x 600mm

261 BT Rolatruc Hand Hydraulic Pallet Truck, with forks approx. 1m long

262 Assorted Sand Belting, with two mobile stands

263 Mobile Steel Rack, (contents not included)

264 Mobile Timber Bench, approx. 1.5m x 600mm (contents not included)(reserve removal until contents cleared)

265 Steel Bench, approx. 1.22m x 750mm, fitted Record No. 24 130mm jaw engineers bench vice, (contents not included)

266 Mobile Tool Cabinet, approx. 1.06m wide

267 Sealey Retracting Air Hose Real, approx. 10m long

268 Three Cage Pallets

269 Timber Bench, with trolley

270

271 Bookcase

272 Timber Bench (contents not included)

273 Two Steel Frame Benches, each approx. 1m x 800mm

274 Timber Bench and timber stand

275 500mm Wide Roller Conveyor, approx. 6.5m long

276 Stock of Sand Paper Belts and Hardener Throughout Room

277 Mobile Plastic Bin, with contents including pneumatic hose and fittings

278 Tool box and contents

Lot Description

279 Spanners, as set out

280 Grease Guns, with oil cans

281 Sealey SA895 Retracting Air Hose Reel, approx. 10m long

282 Tool Boxes and Contents, on top of bench

283 G Clamps, as set out





288 Flat Bar Sash Clamps, as set out

289 Timber Bench, approx. 1.55m x 960mm, (contents not included)(reserve removal until contents cleared)



292 Taskmaster Five Rise Double Sided Step Ladder

293

294 Approx. 20 Chipboard Storage Boxes, each approx. 800mm x 600mm x 500mm high (contents not included) (reserve removal until contents cleared)

295 Approx. 22 Chipboard Storage Boxes, each approx. 800mm x 600mm x 500mm high (contents not included)(reserve removal until contents cleared)

296 250mm Wide Roller Conveyor, approx. 3m long

297 Link 51 M Single-Bay Two-Tier Pallet Rack, with chipboard shelving, (contents not included)(reserve removal until contents cleared)

298 Single-Bay Two-Tier Pallet Rack, with chipboard shelving, (contents not included)(reserve removal until contents cleared)

299 Link 51 M Single-Bay Two-Tier Pallet Rack, with chipboard shelving (contents not included)(reserve removal until contents cleared)

300 Two Link 51 M Single-Bay Multi-Tier Racks, (contents not included)(reserve removal until contents cleared)

301 Two-Bay Three-Tier Rack,(contents not included) (reserve removal until contents cleared)

302 Two-Bay Three-Tier Steel Rack, (contents not included)(reserve removal until contents cleared)

Lot Description

303 Dexion Speedlock S Two-Bay Two-Tier Pallet Rack, with timber shelving (contents not included)(reserve removal until contents cleared)

304 Dexion Speedlock S Two-Bay Single-Tier Pallet Rack, with timber shelving (contents not included) (reserve removal until contents cleared)

305 Seven Rise Alloy Step Ladder

306 Timber Bench, approx. 2m x 1.12m (contents not included)(reserve removal until contents cleared)


308 Approx. 16 Chipboard Storage Boxes, each approx. 800mm x 600mm x 500mm high (contents not included)(reserve removal until contents cleared)

309 Timber Bench, approx. 2.8m x 1.2m fitted joiner’s vice and two pneumatic cylinders

310 Rapesco B7 14/50CT Pneumatic Stapler

311 Pneumatic Drill

312 Makita 3612 Portable Electric Router, 240V

313 Mainly Flat Bar Sash Clamps, as set out on wall

314 Two Timber Benches, one bench fitted joiner’s vice

315 Two Timber Benches, (contents not included) (reserve removal until contents cleared)

316 TOBO 500kg cap. Pneumatic Platform Lift, approx. 1.28 x 760mm on platform, 940mm maximum lift

317 BT Hand Hydraulic Pallet Truck, with forks 1m long

317A Link 51 M Single-Bay Two-Tier Pallet Rack (contents not included)(reserve removal until contents cleared)

ASSEMBLY AREA

318 Platform Trolley, approx. 2m x 1m (contents not included)

319 Pneumatic Lift Conveyor, approx. 2m x 900mm overall)

320 Roller Ball Conveyor, approx. 2m x 2m with extension

321 Edmo 1,000kg Cap. 450mm Wide On Roller Scissor Lift Table. Please note – a nominal contribution towards making good the hole in the floor following the removal of this lot will be charged to the purchaser. Further information will be posted on Bidspotter in due course.

322 Mainly 450mm Wide Roller Conveyoring, to one area, with roller ball conveyor sections and two gate sections

323 Approx. 21.8m x 450mm Roller Conveyoring, with two roller ball sections

Lot Description

324 Approx. 9.2m x 450mm Roller Conveyoring, with gate section

325 Approx. 15.9m x 450mm Wide Roller Conveyoring, with two gate sections and four roller ball sections

326 Single-Bay Three-Tier Pallet Rack, with timber shelving (contents not included) (reserve removal until contents cleared)

327 Link 51 M Two-Bay Three-Tier Pallet Rack, with timber shelving (contents not included) (reserve removal until contents cleared)

328 120mm Jaw Pneumatic Hinge Shear, with bench, (contents not included) (reserve removal until contents cleared)

329 Sanding Bench, with flexible extraction ducting

330 Sanding Bench, with flexible extraction ducting

331 Single Sided Joiner’s Bench, with joiner’s vice (contents not included)


333 Edmo 500kg Cap. Scissor Lift Table, 900mm x 600mm



336 14 Chipboard Storage Boxes, each approx. 800mm x 600mm x 500mm deep, (contents not included) (reserve removal until contents cleared)

337 12 Chipboard Storage Boxes, each approx. 800mm x 600mm x 500mm deep, (no contents included) (reserve removal until contents cleared)

337A Nine Storage Boxes, each approx. 800mm x 600mm x 500mm deep, (contents not included) (reserve removal until contents cleared)

338 Edmo 1500kg cap. Scissor Lift Table, approx. 1.7m x 1.2m, with 350mm roller conveyoring and feed conveyor

339 Trepel E0/10/42 1 ton cap. Scissor Lift Platform, approx. 1.65m x 690mm. Please note – a nominal contribution towards making good the hole in the floor following the removal of this lot will be charged to the purchaser. Further information will be posted on Bidspotter in due course.

340 Timber Bench, fitted joiner’s vice

341 L-Shaped 900mm Wide Roller Conveyor / Roller Ball Conveyoring

342 5.7m x 580mm Roller Conveyor, with two roller ball sections

343 Link 51 M Three-Bay Two-Tier Pallet Rack, with timber shelving (contents not included) (reserve removal until contents cleared)

Lot Description

344 Link 51 M Three-Bay Two-Tier Pallet Rack, with timber shelving (contents not included) (reserve removal until contents cleared)

345 Seven Rise Alloy Step Ladder

346 Link 51 M Five-Bay Multi-tier Pallet Rack, with timber shelving, (contents not included) (reserve removal until contents cleared)

347 Link 51 M Single-Bay Two-Tier Pallet Rack, with timber shelving (contents not included) (reserve removal until contents cleared)

348 Single-Bay Two-Tier Pallet Rack, with timber shelving (contents not included) (reserve removal until contents cleared)

349 Link 51 M Three-Bay Multi-Tier Pallet Rack, with timber shelving, (contents not included) (reserve removal until contents cleared)

350 Link 51 M Three-Bay Multi-Tier Pallet Rack, with timber shelving, (contents not included) (reserve removal until contents cleared)

351 Link 51 M Two-Bay Multi-Tier Pallet Rack, with timber shelving, (contents not included) (reserve removal until contents cleared)

352 Steel Framed Truck

353 Link 51 M Four-Bay Two-Tier Pallet Rack, with timber shelving (contents not included) (reserve removal until contents cleared)


355 Single-Bay Two-Tier Pallet Rack, with timber shelving, (contents not included) (reserve removal until contents cleared)

356 Two Single-Bay Pallet Racks, each with timber shelving (contents not included) (reserve removal until contents cleared)

357 Assorted Approx. 20 Mobile Stock Platforms

DESPATCH AREA

357A Loose Contents of Room, (excluding computers and printers) comprising three four drawer filing cabinets, one two drawer filing cabinet and four chairs, electric heater, storage drawers and bookcase

358 Single-Bay Three-Tier Rack, with timber shelving (contents not included) (reserve removal until contents cleared)

359 Bubble Wrap Wall Mounted Dispensing Unit

360 Single-Bay Three-Tier Rack (with timber shelving) (contents not included) (reserve removal until contents cleared)

361 BT Hand Hydraulic Pallet Truck, with forks 900mm long

Lot Description

362 Edmo 1000kg cap. Scissor Lift Table, approx. 1.5m x 700mm, with 450mm wide roller conveyor Please note – a nominal contribution towards making good the hole in the floor following the removal of this lot will be charged to the purchaser. Further information will be posted on Bidspotter in due course.




365A Edmo 1000kg cap. Scissor Lift Table, approx. 1300mm x 700mm, with 450mm wide roller conveyor

366 Mainly 350mm Wide Roller Conveyoring, to despatch area, with roller ball conveyors (excluding scissor lift tables)

367 Flammable Storage Cabinet, (contents not included) (reserve removal until contents cleared)

368 Flammable Storage Cabinet, (contents not included) (reserve removal until contents cleared)

369 Single-Bay Two-Tier Pallet Rack, with timber shelving (contents not included) (reserve removal until contents cleared)

370 Timber Bench, with Record joiner’s vice (contents not included) (reserve removal until contents cleared)

371/ 376

377 Timber Bench, with Parkinson joiner’s vice (contents not included) (reserve removal until contents cleared)

378 Zarges Folding Alloy Step Ladder

379 Three-Bay Single-Tier Rack, with timber shelving (contents not included) (reserve removal until contents cleared)

Lot Description

380 Two-Bay Single-Tier Rack, with timber shelving (contents not included) (reserve removal until contents cleared)

380A Steel Case Truck

380B Steel Case Truck

380C Steel Case Truck

381 Two-Bay Two-Tier, with timber shelving (contents not included) (reserve removal until contents cleared)

382 Link 51 M Single-Bay Two-Tier Rack, with timber shelving (contents not included) (reserve removal until contents cleared)

383 Dexion Speedlock Single-Bay Single-Tier Rack

384 Two-Tier Steel Frame Rack (contents not included) (reserve removal until contents cleared)

385 Steel Stillage

386 Welded Steel Frame Two-Bay Three-Tier Rack, with timber shelving (contents not included) (reserve removal until contents cleared)

387 Boss 2,200kg cap. Hand Hydraulic Pallet Truck

SPRAY DEPARTMENT

388 Three-Bay Multi-Tier Pallet Rack, with timber shelving (contents not included) (reserve removal until contents cleared)

389 Seven-Bay Multi-Tier Pallet Rack, with timber shelving (contents not included) (reserve removal until contents cleared)


391 Five Rise Mobile Step Ladder

392 Five-Bay Multi-Tier Pallet Rack, with timber shelving (contents not included) (reserve removal until contents cleared)

393 Link 51 M Two-Bay Multi-Tier Pallet Rack, with timber shelving (contents not included) (reserve removal until contents cleared)

394 BT Hand Hydraulic Pallet Truck, with forks 1.2m long

395 Steel Case Truck

396 Approx. 5.5m x 580mm Wide Roller Conveyoring, with radius section

397 Roller Ball Table, approx. 1.37m x 1.37m

398 Approx. 9.4m x 590mm Wide Roller Conveyoring, with radius section

399 Approx. 13.2m x 700mm and 600mm Roller Conveyoring, with radius section

400 Approx. 4.7m x 700mm Roller Conveyoring, with four roller ball sections

401 Roller Ball Table, approx. 1.65m x 1.65m

402 Approx. 15 linear metres mainly 600mm Roller Conveyoring, in five sections

Lot Description

403 Approx. 17m x mainly 500mm Wide Roller Conveyoring, with one section roller ball and two sections x 3.1m x 260mm wide roller conveyor

404 Approx. 8.8m x 580mm Wide Roller Conveyoring, including roller ball section

405 Approx. 3m x 490mm Roller Conveyor Section

406 Edmo 1,000kg cap. Scissor Lift Table, 1.2m x 800mm, with roller conveyor section

407 Edmo 1,000kg cap. Scissor Lift Table, 1.3m x 700mm, with roller conveyor section

408 Mainly 350mm Wide Roller Conveyoring Sections and Roller Ball Sections to one area, excluding scissor lift tables lotted separately

409 Two-Bay Perforated Angle Steel Rack

410 Approx. 13.5m x 600mm Roller Conveyoring (in five sections), including roller ball section

411 Two Roller Ball Conveyor Sections, each approx. 3.7m x 1.2m

412 Four x 1.5m x 350mm Wide Roller Conveyors

413 Assorted Roller and Roller Ball Conveyoring throughout one area

414 Mainly Roller Ball Conveyor Sections, throughout Booth 2

415 Approx. 11m x 600mm Wide Roller Conveyoring, with radius section

416 Mobile Component Rack

417 Mobile Component Rack

418 Link 51 M Single-Bay Single-Tier Pallet Rack, with timber shelf


420/ 425

UPHOLSTERY DEPARTMENT

426 Timber Framed Cloth Laying Up Table, approx. 10m long x 1.5m wide with two cloth roll stands (not including contents) (reserve removal until contents cleared)

427 Brother EF4-B684-057-71 Overlocker, serial no. P683001 with bench and motor, 440V

428 Eastman Straight Knife Cloth Cutter, 240V

429 Compressed Air Distribution Piping (over laying up table) with support wire and angle brackets

430 Toyota LS2-AD320-202 Single Needle Flat Bed Sewing Machine, serial no. EL1357, with bench and motor, 220/240V

431 Toyota Single Needle Flat Bed Sewing Machine, serial no. EL1922, with bench and electric motor, 220/240V

Lot Description

432 Pfaff 196-H2-6/01/BS Two Needle Post Bed Sewing Machine, serial no. 560 009 922 with bench and electric motor, 415V

433 Fiac HP2 Horizontal Receiver Mounted Air Compressor, 240V

434 Propress 2500CS Mobile Electric Steamer, 240V



437 RS Matic VARIAL CUSHION FILLING MACHINE, serial no. VL90-00019

438 DeVilbiss Spray Gun, with pressure pot

439 Dry Back Spray Booth, approx. 1.44m x 1.4m x 1.83m high, with timber bench and axial flow extraction fan. Note: Flexible ducting not included

440 Astor 631 Pneumatic Button Covering Press, serial no. 1047

441 Astor 102 Hand Operated Button Covering Press

442 Four-Tier Single-Bay Pallet Rack with timber shelving (contents not included)(reserve removal until contents cleared)

443 BT Hand Hydraulic Pallet Truck, with forks approx. 1.3m long

444 Single-Bay Three-Tier Rack, with timber shelving and roll dispensers (contents not included) (reserve removal until contents cleared)

STORAGE AREA (OUTSIDE UPHOLSTERY)

445 Single-Bay Three-Tier Pallet Rack, with timber shelving (contents not included) (reserve removal until contents cleared)

446 Single-Bay Three-Tier Rack, with timber shelving (contents not included) (reserve removal until contents cleared)

447 Five Rise Folding Alloy Step Ladder



450 Fort Jason Five Rise Mobile Step Ladder

451 Two-Bay Two-Tier Pallet Rack, with timber shelving (contents not included) (reserve removal until contents cleared)

452 Dexion Speedlock Single-Bay Two-Tier Rack with timber shelving (contents not included) (reserve removal until contents cleared)

453/ 460

Lot Description

GROUND FLOOR

STORAGE ROOMS


462 Mainly Joiner’s Vices, in timber crate

BOILER HOUSE

463 Belle Mini 140 Electric Cement Mixer, (subject reserve removal until 12 noon Wednesday 12 July 2017)

464 Galvanised Steel Partitioning Sections as set out in one stack, each approx. 2.2m x 1m

465 Galvanised Steel Ducting, set out in two stacks on mezzanine floor

466 Loose Contents of Roof Area including Galvanised Steel Ducting, conveyor casing and motor and roller conveyoring

467 Pallet Racking Uprights and Cross Beams as set out in corner of boiler house

468 Pallet Racking Uprights as set out

ENTRANCE STORE

469 Titan Four Rise Folding Alloy Step Ladder

470 Assorted Pneumatic Hand Tools, in two boxes, (all understood to require attention)

471 12-Bays Multi-Tier Assorted Perforated Angle Steel Racking Throughout Storeroom (contents not included) (reserve removal until contents cleared)

STORE ROOM

472 Three-Bays Multi-Tier Pallet Racking, with timber shelving, (contents not included) (reserve removal until contents cleared)

SPRINKLER CONTROL ROOM

473 Six Rise Folding Alloy Step Ladder

STORE ROOM (BETWEEN FITTER’S SHOP AND CENTRAL STAIRCASE)

474 Finspa Three-Bay Three-Tier Pallet Rack, with timber shelving, (contents not included - reserve removal until contents cleared)

475 Finspa Three-Bay Multi-Tier Pallet Rack, with timber shelving, (contents not included - reserve removal until contents cleared)



478 Finspa Two-Bay Three-Tier Pallet Rack, with timber shelving, (contents not included - reserve removal until contents cleared)

TOP FLOOR (OFFICES)

STORAGE ROOM

479 Five Rise Double Sided Step Ladder

Lot Description

480 Centrifugal Fan, with geared electric motor drive

481 Three Electric Motors, on pallet

482 Castors, in two timber crates

483 Four Assorted Sewing Machines, each with bench

484 Steel Framed Timber Top Platform, approx. 2m x 1m

485 Edmo TL1000 1000kg cap. Electro Hydraulic Scissor Lift Table, (no table)

486 Steel Cased Centrifugal Fan, with electric motor drive with axial flow fan

487 Suction Lift Unit, equipment as set out

488 Power Feed Unit

489 Nederman Hopper

490 Axial Flow Fan

491 Pneumatic Cylinders, on pallet with equipment

492 Contents of Top Tier of Pallet Rack, including electric motor, conveyor belting, racking cross beams, fume extraction ducting and air seal

493 Pneumatic Press

494 Fixed Blow Heaters, with mobile rack

495 Four Radio Frequency Cabinets

496 Pallet Racking Components, as set out against wall

497 Assorted Conveyoring Equipment, set out in one area against wall

498 Galvanised Steel Partitioning and Wire Mesh Machine Guard Panels, as set out against wall


500 Galvanised Steel Ducting, as set out against wall

FORK LIFT TRUCKS

501 Combilift C4000 4000KG CAP. GAS ENGINE FORK LIFT TRUCK, serial no. 5971, manufactured 0510, indicated hours (at time of listing) 01739 with triplex mast, 2.35m high, maximum fork height understood to be 5.5m (Please note this lot is subject to reserve removal until 12 noon Friday 14 July 2017) – NOTE collection of this item will be by appointment only week commencing Monday 10 July. A charge will be levied for craneage / loading (this charge will be posted on Bidspotter in due course). Please note the purchaser is required to decommission & skate to the lift out area.

Lot Description

502 Nissan 25 CYM02L25U 2,500KG CAP. BATTERY ELECTRIC FORK LIFT TRUCK, serial no. CYM02E0.05602, indicated hours 5,695 (at time of listing), with triplex mast, 1.95m high, maximum lift height 4,300mm, solid tyres and charger (Please note this lot is subject to reserve removal until 12 noon Friday 14 July 2017) – NOTE collection of this item will be by appointment only week commencing Monday 10 July. A charge will be levied for craneage / loading (this charge will be posted on Bidspotter in due course). Please note the purchaser is required to decommission & skate to the lift out area.

502A Nissan 32UGD02A32PO GAS ENGINE FORK LIFT TRUCK, serial no. EGD02E702592, year of manufacture 2007, 3,200kg cap., registration no. PF07 VEA, indicated hours ________ (at time of listing) (Please note this lot is subject to reserve removal until 12 noon Friday 14 July 2017)

COMPRESSORS

503 Ingersoll Rand NIRVANA N75 PACKAGE AIR COMPRESSOR, serial no. 2770673, year of manufacture 2004, (disconnect ducting at nearest flange) with Ingersoll Rand power box and interconnecting cabling, (cable to isolator panel included) – NOTE collection of this item will be by appointment only week commencing Monday 10 July. A charge will be levied for craneage / loading (this charge will be posted on Bidspotter in due course). Please note the purchaser is required to decommission & skate to the lift out area.

504 Euro DE111 Energy Quantech Air Dryer with two Domnick Hunter filters – NOTE collection of this item will be by appointment only week commencing Monday 10 July. A charge will be levied for craneage / loading (this charge will be posted on Bidspotter in due course). Please note the purchaser is required to decommission & skate to the lift out area.

505 Ingersoll Rand SSR7H-AAC12 PACKAGE AIR COMPRESSOR, serial no. 20274U78A, 7.0 cu mtr/min, with ducting to nearest flange and cabling to isolator panel on wall (not including isolator panel). – NOTE collection of this item will be by appointment only week commencing Monday 10 July. A charge will be levied for craneage / loading (this charge will be posted on Bidspotter in due course). Please note the purchaser is required to decommission & skate to the lift out area.

Lot Description

506 Sullair SK55 PACKAGE AIR COMPRESSOR, indicated hours 21,495 (at time of listing), with ducting to nearest flange and with cable to control panel on wall. – NOTE collection of this item will be by appointment only week commencing Monday 10 July. A charge will be levied for craneage / loading (this charge will be posted on Bidspotter in due course). Please note the purchaser is required to decommission & skate to the lift out area.

507 Hoval vertical welded steel air receiver, serial no. 66896, year of manufacture 2003, approx. 700mm dia. x 1.6m deep. – NOTE collection of this item will be by appointment only week commencing Monday 10 July. A charge will be levied for craneage / loading (this charge will be posted on Bidspotter in due course). Please note the purchaser is required to decommission & skate to the lift out area.

GAS FIRED RADIANT TUBE HEATERS

508 Ambirad GAS FIRED RADIANT TUBE HEATER, approx. 9.7m long (not including exhaust ducting)

509 Ambirad GAS FIRED TWIN RADIANT TUBE HEATER, approx. 3.7m long (excluding exhaust ducting)

510 Ambirad GAS FIRED TWIN TUBE HEATER, approx. 5.5m long (excluding exhaust ducting)

511 Ambirad GAS RADIANT TUBE HEATER, approx. 6m long, (excluding exhaust ducting)




515 Ambirad GAS RADIANT TUBE HEATER, approx. 12.7m long, (excluding exhaust ducting)

516 Ambirad GAS RADIANT TUBE HEATER, approx. 12.5m long, (excluding exhaust ducting)

517 Ambirad TWIN GAS RADIANT TUBE HEATER, approx. 5.8m long, (excluding exhaust ducting)



520

Lot Description

GENERATOR ROOM

521 Petbow 500RA71T 625KVA DIESEL ENGINE GENERATOR SET, serial no. 33010, with Rolls-Royce D7821-9 V8 cylinder diesel engine, serial no. DV8TC4, Petbow 13A27C brushless alternator, serial no. AG 415/202, year of manufacture 1974, with fuel tank (building wall, to be left weather tight following removal) (no cable included)

522-524

FITTER’S SHOP

525 Colchester TRIUMP 7½in x 48in SS & SC CENTRE LATHE, serial no. 4/33354G with equipment on floor

526 Hilka Pro-Craft 1400 Portable Electric Arc Welder, 240v

527 Snap-On Snap-Mig 130 Turbo Portable Mig Welder, 240V (understood to require attention)

528 Murex Autolynx 161 Mig Welding Set, serial no. 96B/0093, 240V

529 Twin Bottle Truck, with oxy/acetylene cutting torch (bottles not included) and propane heating torch (bottle not included)

530 Pollard 150A/1 Pillar Drill, serial no. 30156C

531 Bosch 1506.1 Portable Electric Nibbler, 240v

532 Gesipa Accubird Portable Electric Riveting Tool, with box

533 Bosch GSB 18-2RF Portable Electric Drill, 240v, with carry case

534 Assorted Equipment (as set out), including impactor driver, spirit level, torqu wrench, photo/contact tachometer

535 Assorted Drills, as set out

536 Four Dorvic Machine Skates

537 Bosch GBM 10 Portable Electric Drill, 110v

538 Single Outlet 110V Output Transformer

539 Makita HP2031 Portable Electric Drill, 110v

540 Hilti TE76 Portable Electric Drill, 110v

541 BOC Inverweld 140, 240v with equipment in box

542 Chatwood Single Door Steel Safe, approx. 900mm x 700mm x 1.84m high (no key)

543 Steel Four Drawer Filing Cabinet, with contents

544 Five Drawer Timber Cabinet, with contents including mainly circlips and fixings on top

545 Paraffin Dispensing Container, with contents (understood to be oil)

Lot Description

546 Two Multi Drawer Steel Cabinets, with contents including washers, grub screws, clips, bushes, air fittings, nuts and bolts

547 Grease Guns, as set out in box

548 Assorted Inspection Equipment, as set out

549 Assorted Taps and Dies, as set out

550 Hand Files, as set out

551 Makita 6904VH 1/2in Portable Electric Wrench, 110v, with case

552 Assorted Pullers, as set out in steel case

553 Mainly Spanners and Hand Tools, as set out

554 Steel Framed Bench, with bench vice (reserve removal until contents cleared)

555 Machine Skates & Equipment, as set out

556 Hydraclaw 5 Tons SWL Tow Jack

557 Protool BSP85E Portable Electric Jigsaw, 110v in case

558 Submersible Pump 230v

559 Assorted Hand Tools and Equipment, as set out on bench on right hand side

560 Boxes and Contents, on bottom shelf of steel bench

561 Steel Bench, with Record engineer’s bench vice

562

Three Multi Drawer Cabinets, with plastic drawers and contents including screws, washes and grub screws

563 20 Ton Hand Hydraulic Workshop Press

564 Steel Framed Mobile Bench

565 Part Drums of Oil

566

UPPER WORKSHOP

567 Hypertherm Powermax 600 Plasma Cutter, with steel trolley

568 Cebora MIG305C MIG WELDING SET, (not including bottle)

569 Two Proti-Meter, with Fira angle gauge

570 Rapid 85-2639 Humidity Meter IR Thermometer

571 Wagner MMI1100 Moisture Meter

572 Makita JR3000V Portable Electric Reciprocating Saw, 110v, with case

573 Makita JR3000V Portable Electric Reciprocating Saw, 110v, with case

574 Bosch GWS 0-230 Portable Electric Angle Grinder, 110v



Lot Description

577 Two Duplex Portable Electric Tools, (understood to require attention)


579 Handy 170mm Jaw Hand Lever Bar Cropper, with steel bench, approx. 2.3m x 1.26m

580 Lamp Shades, as set out

581 Multi Drawer Steel Cabinet, with residual contents

582 Edwards 4ft 18G-A/S Folder, serial no. 909037 69C/27827

583 Double Bick Anvil, with stand

584 T-Slotted Table, approx. 320mm x 320mm x 320mm

585 Two Louvered Steel Bin Panels

586 Mec Brown/Pedrazzoli Cold Saw, with roller feed table

587 Assorted Hand Tools and Equipment, as set out

588 Stihl TS400 Petrol Engine Saw

589 Makita 8402VD Portable Electric Drill, with case

590 Metabo BS 14.4Li Portable Electric Drill, with case

591 Protool PDP 32-2E Portable Electric Drill, 110v, with case

592 Assorted G Clamps, as set out

593 Hitachi HU-14 365mm Cut Off Saw, 110v

594 Wolf 8726 Double Ended Grinder, 380/440v

595 Bosch 0601615042 Portable Electric Router, 240v

596 Makita 3612BR Portable Electric Router, 240v

597 Ryobi EBG2515 150mm Double Ended Grinder, 240v

598 Weller Universal Portable Electric Soldering Gun, with case, 240v

599 AeroGo Inflatable Jacks and Equipment, as set out

600 Tool bits, in box

601 Tool bits, in box

602 Super-Ego 50A Pipe Threading Machine, serial no. N66561, 240v, with steel stand and roller stand

603 Hand Hydraulic Floor Jack

604 Pipe Vice, with die head

605 Two Jacks

606 A-Frame Stock Rack, with contents and off cuts etc on floor

607 Hilmor Pipe Vice and Bender

Lot Description

608 3ft Triple Roll Bender

609 Flood Lights, with tripod stand, 240v

610 Perforated Angle Steel Rack and contents, including cable, electrical fittings, with steel filing cabinet (left hand side) and contents

611 Multi Drawer Steel Cabinet, with contents including conduit fittings

612 Perforated Angle Steel Rack, including electric motors, anchor bolts, machine spares, sealants and fastenings

613 Four Rise Alloy Step Ladder

614 Equipment set out in one Area, including pipe clamp fittings, scaffolding clamps, electric motor, steel plate, two trestles and wire mesh off cuts

615 Sash Clamps (set out in corner)

616 Assorted Lifting Chains and Straps, with wall mounted rack

617 Plastic Stacking Boxes, with pipe clamp fittings

618 Double Door Steel Cabinet

619

620

FITTERS SHOP – STORAGE AREA

621 Drain Rods and Equipment, as set out

622 Sealey 180 Superboost Starter/Charger, 240v

623 Die Head

624 Line Marking Trolley

625 Florabest PDS30 Pressure Sprayer

626 Portable Pneumatic Tooling, in one box

627 Residual Loose Contents of Room, including V belts, circlips, rubber belt, chain, filters, gaskets, pneumatic cylinders, air bags, gauges, fasteners, pipe fittings, pulleys, pipe adapters and ends, bearings and flexible plastic hose

628

629

KITCHEN/CANTEEN

630 Sharp R-26ST Microwave

631 Sharp R-26ST Microwave

632 Hobart Microwave

633 Goodmans GS17 Microwave

634 Elcold Chest Freezer

635 Cignet Electric Water Heater

636 Burco Electric Water Heater

637 Falcon Dominator Electric Double Door Oven / Boiling Top

638 Electric Grill, with stainless steel table

639 Electric Triple Pan Fryer

Lot Description

640 Stainless Steel Wall Bench, approx. 1.14m x 700mm

641 Electric Toaster

642 Stainless Steel Wall Bench, approx. 620mm x 600mm fitted

643 Stainless Steel Top Bench, approx. 1.22m x 600mm

644 Lincat Electric Water Heater

645 Break Line PL50 Dishwasher, with stand and trays

646 Stainless Streel Top Server Unit, approx. 5.4m long

647 Stainless Streel Wall Bench, approx. 1.5m x 700mm

648 Bin Stand

649 Zanussi Single Door Refrigerator

650 Stainless Steel Extraction Canopy, approx. 2.8m x 1.15m x 630mm deep, with extraction ducting up to first joint

651 Three Tier Trolley, with contents

652 Foster Gastronorm Supra Refrigerator (locked - no key)

653 Remaining Loose Contents of Room

654 Titan 30 Flying Insect Eliminator

655 Three Tier Trolley

656 Waste Bag Stand


658 Eight Fixed Position Bench Seats, with end panel

659 Eight Fixed Position Bench Seats

660 Seven Fixed Position Bench Seats, with end panel

661 Four Fixed Position Bench Seats

662 Caravell Chest Freezer

OFFICES

BOARD ROOM

663 Meeting Table, approx. 1.53m x 1.23m

664 Meeting Table, approx. 2.14m x 1.23m

665 Ten Fabric Upholstered Wood Frame Armchairs

666 11 Fabric Upholstered Wood Frame Stand Chairs

667 Three Electric Heaters

668 Sasco Easel

669 Sideboard (no contents)

670 Frigidaire Single Door Refrigerator

671 Table, approx. 690mm x 690mm

672 Table, approx. 1m x 500mm (no contents)

673 Prestige Easel

Lot Description

PASSAGE

674 Four Artificial Bushes

major sale of traditional and modern furniture ...sandersonweatherall.agencypilot.com/store/... ·...

Documents