magpul 2012 catalog shotgun stocks and magazines
DESCRIPTION
2012 Magpul Catalog - Weapons Accessories, Stocks, PMAGs, Magazine AccessoriesAs featured at: http://blog.predatorbdu.com/2012/01/magpul-2012-catalog-now-available.htmlTRANSCRIPT
6 Shotgun10 Shotgun AcceSSorieS14 MAgAzineS32 MAgAzine AcceSSorieS40 Moe SySteM52 StockS66 Stock AcceSSorieS70 Sling SySteM78 gripS90 SightS92 theory BASed100 AcceSSorieS106 geAr116 MAgpul FAMily
THAT’S BEEN THE MAGPUL MANTRA SINCE DAY ONE.
It is almost always easier to design a product that is complicated, confusing, and expensive rather than simple, intuitive, and affordable. Although it is more difficult, Magpul has chosen the latter approach.
The product itself should actually instruct the user about its operation and function. Although every Magpul product comes with installation and usage instructions, our aim is to design products so self-explanatory that instructions become unnecessary.
Simply put, if the user is thinking about the product rather than the mission, the design has failed.
PHOTO: ORIGINAL MAGPUL TOOL≥
drivenmission
design
©2012 Magpul Industries Corporation. All Rights Reserved. Prices subject to change without notice. MAGPUL holds a Trademark on all of its product names and logos. The following are trademarks of Magpul Industries Corporation, registered in the U.S. and other countries: AFG®, American Manufacturing Logo, ASAP®, B.A.D. LEVER®, CTR®, MAGPUL®, Stylized Magpul Logo, Magpul Inner Logo, MBUS®, MIAD®, MOE®, MVG®, PMAG®, PRS®, RSA®, RVG®, SPEEDPLATE®, Tenth Anniversary Logo, UBR®, UNFAIR ADVANTAGE®. MELONITE is a registered trademark of Durferrit GmbH. REMINGTON is a registered trademark of RA Brands, LLC. FN and SCAR are trademarks of FN Herstal S.A. HK is a trademark of Heckler & Koch GmbH. MASH HOOK is a trademark of ITW Waterbury Buckle. GLOCK is a registered trademark of Glock GmbH. SUREFIRE and SCOUT LIGHT are trademarks of Surefire, LLC.
3d e s i g n e d , m a n u f a c t u r e d & b u i l t i n t h e u n i t e d s t a t e s o f a m e r i c a | m a g p u l 2 0 1 2 c a t a l o gm a g p u l . c o m | 1 . 8 7 7 . 4 6 2 . 4 7 8 5 | u n f a i r a d v a n t a g e | m a g p u l i n d u s t r i e s c o r p o r a t i o n2
YOU AREwHAT YOU DO,wHEN IT COUNTS. -THE MASAO
5d e s i g n e d , m a n u f a c t u r e d & b u i l t i n t h e u n i t e d s t a t e s o f a m e r i c a | m a g p u l 2 0 1 2 c a t a l o gm a g p u l . c o m | 1 . 8 7 7 . 4 6 2 . 4 7 8 5 | u n f a i r a d v a n t a g e | m a g p u l i n d u s t r i e s c o r p o r a t i o n4
sHoTgUn
7d e s i g n e d , m a n u f a c t u r e d & b u i l t i n t h e u n i t e d s t a t e s o f a m e r i c a | m a g p u l 2 0 1 2 c a t a l o gm a g p u l . c o m | 1 . 8 7 7 . 4 6 2 . 4 7 8 5 | u n f a i r a d v a n t a g e | m a g p u l i n d u s t r i e s c o r p o r a t i o n6
MAGPUL ORIGINAL EQUIPMENT SYSTEM COMPONENT
The SGA 870 is an adaptable stock for Remington 870 12 gauge shotguns, designed with a wide range of customizable features and accessories to meet individual end user needs.
• Spacer-adjustable LOP in 1/2” increments from 12.5” to 14.5”• Recoil reducing butt-pad• Integral right/left 1.25” sling loops• Reinforced polymer construction• Enhanced grip angle ergonomics• Available butt-pad adapter for compatibility with many standard 870 recoil pads• Available interchangeable cheek pieces for comb height adjustment • Available left/right side QD sling attachment points
≥ MODEL NAME _MAG462
Moe 870: Shotgun Forend
The MOE 870 Forend is a simple, lightweight forend for the Remington 870 line of 12 gauge shotguns, designed to provide much-needed adaptability with the attachment of optional MOE accessories and mounts.
• Reinforced polymer construction• Increased length for improved pump manipulation• Compatible with MOE accessories such as the MVG, Polymer Rail Sections, and Illumination Kit.• Installation wrench included
≥ MODEL NAME _MAG460
SgA 870: Shotgun Stock$109.95
product specifications
≥ wEAPON COMPATIBILITY
REMINGTON 870 12-GAuGE SHOTGuNS(ExCEPT SuPER MAG)
colors
MAG462-bLK MAG462-FDE MAG462-ORG
product specifications
≥ wEAPON COMPATIBILITY
REMINGTON 870 12-GAuGE SHOTGuNS
≥ LENGTH OF PULL 12.5" - 14.5"
colors
MAG460-bLK MAG460-FDE MAG460-ORG
$29.95
<<
pr
od
uc
t \
mis
sio
n
da
ta
\\
<<
pr
od
uc
t \
mis
sio
n
da
ta
\\
COMING SPRING 2012 COMING SPRING 2012
NEWPRODUCT
NEWPRODUCT
m a g p u l . c o m | 1 . 8 7 7 . 4 6 2 . 4 7 8 5 | u n f a i r a d v a n t a g e | m a g p u l i n d u s t r i e s c o r p o r a t i o n8 9d e s i g n e d , m a n u f a c t u r e d & b u i l t i n t h e u n i t e d s t a t e s o f a m e r i c a | m a g p u l 2 0 1 2 c a t a l o g
sh
ot
gu
n
0.50"0.750" 0.25"
Compatible with the Magpul SGA Shotgun Stock, the SGA Cheek Riser Kits allow the user to configure their shotgun with the ideal cheek piece height to accommodate a wide range of sight/optic configurations and shooter preferences. The Riser Kits are available in two configurations: SGA Low Rise Kit, including one (1) 0.25” cheek riser and one (1) 0.50” cheek riser, and the SGA High Rise Kit, including one (1) 0.50” cheek riser and one 0.75” cheek riser. Optimal cheek piece height will vary based on sight/mount type and user preference, but common configurations include: • Low-profile bead sights: 0.00”– 0.25” riser• Ghost ring or other raised sights: 0.00”– 0.25”• Low-profile optic (i.e. mini red dot): 0.25”– 0.50” riser*• Standard optic (i.e. red dot or holographic sight): 0.25”– 0.50” riser*• Magnified optic: 0.50”– 0.75” riser**Note: Add approximately 0.25” to these recommendations for aftermarket raised receiver rails and optics utilizing higher mounts. Optic mounts designed for the AR15/M16 platform may be too high for use with the SGA depending on shooter preference.
The SGA 870 OEM butt-Pad Adapter allows the user to replace the standard Magpul SGA Recoil Pad with a synthetic Remington-pattern or aftermarket 870 butt-pad of their choice (not included).
The Receiver Sling Attachment Point is an attachment point for the Remington 870 series of shotguns for clip-in style slings such as the MS3, HK hook, or MASH Hook.
• Solid steel construction with durable Melonite coating• user-configurable for left or right-side attachment• Compatible with the Magpul SGA 870 buttstock
≥ MODEL NAME _MAG461 | MAG463
SgA cheek riSer kitS≥ MODEL NAME _MAG318
SgA 870 oeM Butt-pAd AdApter
≥ MODEL NAME _MAG507
SgA 870 receiver Sling Mount
$15.95 $9.95
$19.95
product specifications
≥ MOUNT TYPE SGA 870 SHOTGuN STOCK
colors
MAG461-bLK (HIGH) MAG463-bLK (LOW)
MAG461-FDE (HIGH) MAG463-FDE (LOW)
MAG461-ORG (HIGH) MAG463-ORG (LOW)
product specifications
≥ MOUNT TYPE SGA 870 SHOTGuN STOCK
colors
MAG318-bLK
product specifications
≥ MOUNT TYPE SGA 870 SHOTGuN STOCK
colors
MAG507-bLK
<<
pr
od
uc
t \
mis
sio
n
da
ta
\\
<<
pr
od
uc
t \
mis
sio
n
da
ta
\\
<<
pr
od
uc
t \
mis
sio
n
da
ta
\\
COMING SPRING 2012 COMING SPRING 2012
COMING SPRING 2012
NEWPRODUCT
NEWPRODUCT
NEWPRODUCT
11d e s i g n e d , m a n u f a c t u r e d & b u i l t i n t h e u n i t e d s t a t e s o f a m e r i c a | m a g p u l 2 0 1 2 c a t a l o gm a g p u l . c o m | 1 . 8 7 7 . 4 6 2 . 4 7 8 5 | u n f a i r a d v a n t a g e | m a g p u l i n d u s t r i e s c o r p o r a t i o n10 1110
sh
ot
gu
n a
cc
es
so
rie
s
wHEN I’M GOOD I’M VERY, VERY GOOD, AND wHEN I’M BAD I’M EVEN BETTER.
-MAE WEST
13d e s i g n e d , m a n u f a c t u r e d & b u i l t i n t h e u n i t e d s t a t e s o f a m e r i c a | m a g p u l 2 0 1 2 c a t a l o gm a g p u l . c o m | 1 . 8 7 7 . 4 6 2 . 4 7 8 5 | u n f a i r a d v a n t a g e | m a g p u l i n d u s t r i e s c o r p o r a t i o n12
mAgAZines
15d e s i g n e d , m a n u f a c t u r e d & b u i l t i n t h e u n i t e d s t a t e s o f a m e r i c a | m a g p u l 2 0 1 2 c a t a l o gm a g p u l . c o m | 1 . 8 7 7 . 4 6 2 . 4 7 8 5 | u n f a i r a d v a n t a g e | m a g p u l i n d u s t r i e s c o r p o r a t i o n14
1
2
3
4
5
PmAg TeCHnoLogY
ORANGE INDICATOR COILPOINTS TO ROuNDSREMAINING IN MAGAZINE
25
30
20
15
5
0
10
MISSION: Like its predecessors, the PMAG 30 M3 is a lightweight 5.56 x 45 NATO / .223 Remington 30-round polymer magazine for the AR15/M16 platform, but with a number of new features and advanced characteristics that optimize its durability, compatibility, and overall perfor-mance for the most demanding end-users. by combining the knowledge gained from years of high volume PMAG production, extensive research and development of materials and manufacturing processes, and incorporating feedback from a broad range of end-users, the PMAG 30 M3 pushes the envelope of magazine performance one step further.
FEATURES: The PMAG 30 M3 features a corrosion-resistant stainless steel spring, four-way anti-tilt follower, pop-off Impact/Dust Cover that snaps onto the floorplate when not in use, and easy tool-less disassembly for cleaning and maintenance. Low-profile ribs and aggressive front and rear texture [1] provide positive control of the magazine while helping ensure compat-ibility with common double and triple magazine pouches. The easy to disassemble standard flared floorplate provides drop protection and aids extraction from magazine pouches, but can be replaced by a PMAG Ranger Plate for improved handling, or slim-line internal floor plate to minimize bulk (not included). A paint pen dot matrix [2] has been added to the bottom panel of the magazine body to allow easy marking by the end user for magazine identification.
Modified internal and external geometry [3] provides greater compatibility and function with a wide range of non-AR15/M16 platform weapons. A re-designed bolt catch notch in the rear of the magazine allows increased bolt catch clearance, while an over-travel stop [4] on the spine helps ensure the PMAG 30 M3 will not over-insert on compatible weapons, includ-ing the AR15/M16, HK® 416, M27 IAR, british SA-80, FN® SCAR™ MK 16/16S, and others.
In addition to expanded feature set and compatibility, the PMAG 30 M3 incorporates new material technology and manufacturing processes [5] that have been engineered to exceed rigorous military performance specifications. by improving strength and durability in critical areas, the PMAG 30 M3 increases overall reliability and lifespan, while decreasing total lifecycle cost.
HOw THE PMAG MAGLEVEL wORKSThe MagLevel round indicator system allows for visual verification of the magazine’s loaded round count via a bright orange indicator coil. by incorporating a window on both sides of the magazine, it is easily used by both right and left-handed shooters. Orange line points to rounds remaining in magazine.
1525 30
17d e s i g n e d , m a n u f a c t u r e d & b u i l t i n t h e u n i t e d s t a t e s o f a m e r i c a | m a g p u l 2 0 1 2 c a t a l o gm a g p u l . c o m | 1 . 8 7 7 . 4 6 2 . 4 7 8 5 | u n f a i r a d v a n t a g e | m a g p u l i n d u s t r i e s c o r p o r a t i o n16
ma
ga
zin
es
≥ MODEL NAME _MAG556
pMAg 30 M3 MAglevel
<<
pr
od
uc
t \
mis
sio
n
da
ta
\\
product specifications
≥ CALIBER 5.56 NATO/.223 REMINGTON
colors
MAG556-bLK
TBA
<<
pr
od
uc
t \
mis
sio
n
da
ta
\\
product specifications
≥ CALIBER 5.56 NATO/.223 REMINGTON
colors
MAG557-bLK
The PMAG 30 M3 features a corrosion-resistant stainless steel spring, four-way anti-tilt follower, pop-off Impact/Dust Cover that snaps onto the floorplate when not in use, and easy tool-less disassembly for cleaning and maintenance. Low-profile ribs and aggressive front and rear texture provide positive control of the magazine while helping ensure compatibility with common double and triple magazine pouches. The easy to disassemble standard flared floorplate provides drop protection and aids extraction from magazine pouches, but can be replaced by a PMAG Ranger Plate for increased handling, or slim-line internal floor plate to minimize bulk (not included). A paint pen dot matrix has been added to the bottom panel of the magazine body to allow easy marking by the end user for magazine identification.
Modified internal and external geometry provides greater compatibility and function with a wide range of non-AR15/M16 platform weapons, including the AR15/M16, HK® 416, M27 IAR, british SA-80, FN® SCAR™ MK 16/16S, and others.
The PMAG 30 M3 MagLevel is a lightweight 5.56 x 45 NATO (.223 Remington) 30-round polymer magazine for the AR15/M16 platform designed to allow approximate verification of loaded round count.
Maintaining the same improved feature set and performance characteristics as the standard version, the PMAG 30 M3 MagLevel features dual-side transparent windows and bright orange indicator coil to allow rapid visual identification of approximate number of rounds remaining in the magazine.
≥ MODEL NAME _MAG557
pMAg 30 M3TBA
NEWPRODUCT
COMING SPRING 2012COMING SPRING 2012
NEWPRODUCT
19d e s i g n e d , m a n u f a c t u r e d & b u i l t i n t h e u n i t e d s t a t e s o f a m e r i c a | m a g p u l 2 0 1 2 c a t a l o gm a g p u l . c o m | 1 . 8 7 7 . 4 6 2 . 4 7 8 5 | u n f a i r a d v a n t a g e | m a g p u l i n d u s t r i e s c o r p o r a t i o n18
21
MY MOTHER NEVER SAw THE IRONY IN CALLING ME A SON-OF-A-BITCH.
– Jack Nicholson
21d e s i g n e d , m a n u f a c t u r e d & b u i l t i n t h e u n i t e d s t a t e s o f a m e r i c a | m a g p u l 2 0 1 2 c a t a l o gm a g p u l . c o m | 1 . 8 7 7 . 4 6 2 . 4 7 8 5 | u n f a i r a d v a n t a g e | m a g p u l i n d u s t r i e s c o r p o r a t i o n20
<<
pr
od
uc
t \
mis
sio
n
da
ta
\\ The original PMAG is a lightweight 5.56x45 NATO (.223
Remington) AR15/M16 compatible magazine. It features advanced impact resistant polymer construction, a pop-off Impact/Dust Cover for storage, and an easy to disassemble design with a flared floorplate for positive magazine extraction from pouches. The Impact/Dust Cover can be snapped onto the floorplate when not in use to prevent possible loss.
product specifications
≥ CALIBER 5.56 NATO/.223 REMINGTON
≥ NSN 1005-01-576-5159 (bLK ONLY)
colors
MAG211-bLK MAG211-FDE MAG211-FOL MAG211-ODG
$14.95
<<
pr
od
uc
t \
mis
sio
n
da
ta
\\
The PMAG 30 MagLevel (5.56 NATO/.223 Remington) is a durable, lightweight, high reliability 30-round polymer magazine optimized for the AR15/M16.
Otherwise identical to the standard PMAG, the PMAG 30 MagLevel features transparent windows on both sides of the body and has a painted indicator on the spring for quick determination of approximate rounds remaining in the magazine.
$17.95
product specifications
≥ CALIBER 5.56 NATO/.223 REMINGTON
≥ NSN 1005-01-576-5164 (bLK ONLY)
colors
MAG210-bLK MAG210-FDE MAG210-FOL MAG210-ODG
≥ MODEL NAME _MAG211
pMAg 30≥ MODEL NAME _MAG210
pMAg 30 MAglevel
m a g p u l . c o m | 1 . 8 7 7 . 4 6 2 . 4 7 8 5 | u n f a i r a d v a n t a g e | m a g p u l i n d u s t r i e s c o r p o r a t i o n22 23d e s i g n e d , m a n u f a c t u r e d & b u i l t i n t h e u n i t e d s t a t e s o f a m e r i c a | m a g p u l 2 0 1 2 c a t a l o g
ma
ga
zin
es
≥ MODEL NAME _MAG241
eMAg 30
<<
pr
od
uc
t \
mis
sio
n
da
ta
\\
<<
pr
od
uc
t \
mis
sio
n
da
ta
\\ The EMAG (Export MAGazine) is a lightweight 30-round
5.56x45 NATO polymer magazine that features a number of aesthetic and functional changes from the original PMAG. While the EMAG remains 100% compatible with the AR15/M16 platform, its unique geometry is optimized for foreign-made weapons such as the HK 416, and british SA-80.
To enhance compatibility with double and triple magazine pouches as well as aftermarket mag couplers, the EMAG features a slim, rib-less, anti-snag profile. Front-to-back and side-to-side dimensions have been adjusted to ensure compatibility with as many STANAG 4179 weapons as possible, including most non Colt-spec AR15 rifles.
EMAG features the same pop-off Impact/Dust Cover as the PMAG to prevent dirt and debris intrusion and protect the feedlips from impact damage during storage. When not in use, the Impact/Dust Cover can be stored on the magazine’s floorplate to prevent possible loss.
product specifications
≥ CALIBER 5.56 NATO/.223 REMINGTON
≥ NSN 1005-01-591-6169
colors
MAG241-bLK
$22.95
The PMAG 20 (5.56 NATO/.223 Remington) is a durable, lightweight, high reliability 20-round polymer magazine for the AR15/M16.
The PMAG 20 features a controlled-tilt follower, straight body, and pop-off Impact/Dust Cover that prevents dirt/debris intrusion and protects the feedlips from impact damage. The PMAG 20 utilizes a resilient stainless steel spring for corrosion resistance and a proprietary polymer to ensure durability and performance in all environments.
≥ MODEL NAME _MAG217
pMAg 20$13.95
product specifications
≥ CALIBER 5.56 NATO/.223 REMINGTON
colors
MAG217-bLK MAG217-FDE MAG217-FOL MAG217-ODG
MAGPuL EMAG NOW STANDARD ISSuE FOR bRITISH TROOPS
“Ounces equal pounds, and pounds equal pain.” As the result of an urgent Operational Requirement from the uK Ministry of Defence to reduce the weight burden on troops in Afghanistan, the Magpul EMAG 30 is now standard issue for all british soldiers deploying with the 5.56 NATO SA80/L85A2 weapon system. The EMAG, or “Export Magazine”, was designed specifically for compatibility with all variants of the standard issue british service rifle, and shaves almost a full kilogram (2.20 lbs) of weight from each soldier’s ammunition load out compared to the previously-issued steel magazines. Magpul delivered just over 1 million EMAGs in total by spring 2011, many of which have been issued to british soldiers in Afghanistan.
25d e s i g n e d , m a n u f a c t u r e d & b u i l t i n t h e u n i t e d s t a t e s o f a m e r i c a | m a g p u l 2 0 1 2 c a t a l o gm a g p u l . c o m | 1 . 8 7 7 . 4 6 2 . 4 7 8 5 | u n f a i r a d v a n t a g e | m a g p u l i n d u s t r i e s c o r p o r a t i o n24
ma
ga
zin
es
≥ MODEL NAME _MAG243
pMAg 20lr
<<
pr
od
uc
t \
mis
sio
n
da
ta
\\
<<
pr
od
uc
t \
mis
sio
n
da
ta
\\ The PMAG 20LR (7.62 NATO/.308 Winchester) is a
lightweight, high reliability 20-round polymer magazine for SR25/M110/Mk11 rifles.
Designed for compatibility with military-issue 7.62 NATO M118LR ammunition and SR25/M110/Mk11 rifles, the PMAG 20LR features true 20-round capacity, a controlled-tilt follower, constant-curve internal geometry, and pop-off Impact/Dust Cover to prevent dirt/debris intrusion during long-term storage. The PMAG 20LR is also compatible with the LMT 7.62 MRP/british L129A1, LaRue Tactical ObR, POF P-308, LWRC REPR, DPMS Panther LR-308, and other SR25-compatible magazine wells.
product specifications
≥ CALIBER 7.62 NATO/.308 WINCHESTER
≥ NSN 1005-99-879-5419
colors
MAG243-bLK
$19.95
The PMAG 30G MagLevel (5.56 NATO/.223 Remington) is a durable, lightweight, high reliability 30-round polymer magazine for the HK G36.
The PMAG 30G MagLevel features a four-way anti-tilt follower, constant-curve internal geometry, slim-line body for enhanced pouch compatibility, and MagLevel round indicator windows to easily identify loaded round count. PMAG 30G utilizes the same floor plate, lock plate, and Milspec black oxide coated stainless steel spring as the original PMAG 30 MagLevel to ensure durability and performance in all environments.
≥ MODEL NAME _MAG234
pMAg 30g MAglevel$27.95
product specifications
≥ CALIBER 5.56 NATO/.223 REMINGTON
≥ wEAPON H&K G36 SERIES WEAPONS
colors
MAG234-bLK
27d e s i g n e d , m a n u f a c t u r e d & b u i l t i n t h e u n i t e d s t a t e s o f a m e r i c a | m a g p u l 2 0 1 2 c a t a l o g26 m a g p u l . c o m | 1 . 8 7 7 . 4 6 2 . 4 7 8 5 | u n f a i r a d v a n t a g e | m a g p u l i n d u s t r i e s c o r p o r a t i o n
ma
ga
zin
es
iden t if ica t ion >> mag55 7 >>
pmag 30 m3magaZine
mag556 >>
pmag 30 m3magl e vel
mag2 1 1 >>
pmag 30magaZine
mag2 10 >>
pmag 30magl e vel
mag241 >>
emag 30magl e vel
mag2 17 >>
pmag 20magaZine
mag243 >>
pmag 20 lrmagaZine
mag23 4 >>
pmag 30gmagl e vel
pr
od
uc
t d
at
a
//
au
th
en
tic
at
ion
≥ wEAPONS AR15/M16/HK416/SA-80 AR15/M16/HK416/SA-80 AR15/M16 AR15/M16 AR15/M16/HK 416/SA-80 AR15/M16 SR25 HK G36
≥ CALIBER 5.56/.223 5.56/.223 5.56/.223 5.56/.223 5.56/.223 5.56/.223 7.62/.308 5.56/.223
≥ ROUNDS 30 30 30 30 30 20 20 30
≥ MAGLEVEL
≥ MARKING GRID
≥ GENERATION M3 M3
≥ COLORS bLK bLK bLK | FDE | FOL | ODG bLK | FDE | FOL | ODG bLK bLK | FDE | FOL | ODG bLK bLK
≥ NSN 1005-01-576-5159 (bLK ONLY) 1005-01-576-5164 (bLK ONLY) 1005-01-591-6169 1005-99-879-5419
≥ PRICE T.b.A. T.b.A. $14.95 $17.95 $22.95 $13.95 $19.95 $27.95
NEWPRODUCT
NEWPRODUCT
29d e s i g n e d , m a n u f a c t u r e d & b u i l t i n t h e u n i t e d s t a t e s o f a m e r i c a | m a g p u l 2 0 1 2 c a t a l o gm a g p u l . c o m | 1 . 8 7 7 . 4 6 2 . 4 7 8 5 | u n f a i r a d v a n t a g e | m a g p u l i n d u s t r i e s c o r p o r a t i o n28
ma
ga
zin
es
IF YOU ARE NOT PREPARED TO DEFEND CIVILIZATION, THEN BE PREPARED TO ACCEPT BARBARISM.
-THOMAS SOWELL
31d e s i g n e d , m a n u f a c t u r e d & b u i l t i n t h e u n i t e d s t a t e s o f a m e r i c a | m a g p u l 2 0 1 2 c a t a l o gm a g p u l . c o m | 1 . 8 7 7 . 4 6 2 . 4 7 8 5 | u n f a i r a d v a n t a g e | m a g p u l i n d u s t r i e s c o r p o r a t i o n30
<<
pr
od
uc
t \
mis
sio
n
da
ta
\\
Standard Floorplate
Slimline Floorplate
product specifications
≥ COMPATIBILITY PMAG 30 M3 [ALL VERSIONS]
colors
MAG559-bLK
$4.95 | 3 PACK
$17.95
product specifications
≥ COMPATIBILITY PMAG 30 AND PMAG 30 M3 [ALL VERSIONS]
colors
MAG595-bLK
<<
pr
od
uc
t \
mis
sio
n
da
ta
\\
≥ MODEL NAME _MAG559
pMAg 30 M3 Sl FloorplAte
≥ MODEL NAME _MAG595
MAglink
The MagLink 30 is a coupler for PMAG 30 and PMAG 30 M3 magazines which allows the user to attach two magazines together for more efficient speed reloads, and to keep an additional 30 rounds of ammunition accessible on the weapon at all times. The MagLink 30 features a two-piece bolt on design, and durable, lightweight reinforced polymer construction. Note: the MagLink 30 is not compatible with the first generation PMAG 30, PMAG 20, EMAG, PMAG 30G, or PMAG 20LR.
Designed to reduce bulk and enhance compatibility with double and triple magazine pouches, the Slim-Line Floorplate replaces the standard flared floorplate on PMAG 30 M3 - all variants. The Slim-Line Floorplate reduces PMAG thickness by approximately 1/8” per magazine, and requires use of Impact/Dust Cover or other improvised tool for disassembly. Note: Slim-Line Floorplates are only compatible with PMAG 30 M3 variants, and will not fit other current production or legacy PMAG products.
mAgAZineACCessories
COMING SPRING 2012
NEWPRODUCT
NEWPRODUCT
COMING SPRING 2012
33d e s i g n e d , m a n u f a c t u r e d & b u i l t i n t h e u n i t e d s t a t e s o f a m e r i c a | m a g p u l 2 0 1 2 c a t a l o gm a g p u l . c o m | 1 . 8 7 7 . 4 6 2 . 4 7 8 5 | u n f a i r a d v a n t a g e | m a g p u l i n d u s t r i e s c o r p o r a t i o n32
ma
ga
zin
e a
cc
es
so
rie
s
The Ranger Plate floor plate offers speed and efficiency benefits similar to those of the original Magpul.
The overmolded Ranger replaces the standard floor plate on uSGI 30-round 5.56 NATO aluminum magazines.
The Magpul rubberized loop attaches to the bottom of the magazine to increase controllability and speed during high-stress tactical magazine changes. The original Magpul is based on the tried and true para-cord loops and duct tape tabs currently in use with special warfare units worldwide. Fits most aluminum, steel, and polymer magazines including the Magpul PMAG.
The low profile overmolded L-Plate replaces the standard floor plate on uSGI 30-round 5.56 NATO aluminum magazines, aiding in magazine control and acting as an impact bumper to shield the magazine against damage when dropped.The PMAG Ranger Plate brings the speed and controllability of the original Ranger to the
Magpul PMAG system. The reinforced polymer base has an overmolded rubber loop that provides positive control and impact protection. The PMAG Ranger replaces standard PMAG floor plates and features a para-cord hole for custom loop configurations.
≥ MODEL NAME _MAG020
uSgi rAnger plAte≥ MODEL NAME _MAG001 | MAG002 | MAG003
originAl MAgpul 5.56/7.62/9MM
≥ MODEL NAME _MAG024
uSgi l-plAte≥ MODEL NAME _MAG212
pMAg rAnger plAte
$19.95 | 3-PACK$9.95 | 3-PACK
$19.95 | 3-PACK
$14.95 | 3-PACK
product specifications
≥ COMPATIBILITY ALuMINuM uSGI 30-ROuND MAGAZINES
≥ NSN # 1005-01-560-2100 (MAG020-bLK)
colors
MAG020-bLK MAG020-FDE MAG020-FOL MAG020-ODG
product specifications
≥ NSN # 9MM NSN: 1005-01-554-2864 (MAG003-bLK)
≥ NSN # 5.56MM NSN: 1005-01-554-2868 (MAG001-bLK)
5.56 nato
MAG001-bLK MAG001-FDE MAG001-FOL MAG001-ODG
7.62 nato
MAG002-bLK MAG002-FDE MAG002-FOL MAG002-ODG
9 mm
MAG003-bLK MAG003-FDE MAG003-FOL MAG003-ODG
product specifications
≥ COMPATIBILITY ALuMINuM uSGI 30-ROuND MAGAZINES
colors
MAG024-bLK MAG024-FDE MAG024-FOL MAG024-ODG
product specifications
≥ COMPATIBILITY PMAG 30, PMAG 20, EMAG 30, PMAG 30G
colors
MAG212-bLK MAG212-FDE MAG212-FOL MAG212-ODG
<<
pr
od
uc
t \
mis
sio
n
da
ta
\\
<<
pr
od
uc
t \
mis
sio
n
da
ta
\\
<<
pr
od
uc
t \
mis
sio
n
da
ta
\\
<<
pr
od
uc
t \
mis
sio
n
da
ta
\\
35d e s i g n e d , m a n u f a c t u r e d & b u i l t i n t h e u n i t e d s t a t e s o f a m e r i c a | m a g p u l 2 0 1 2 c a t a l o gm a g p u l . c o m | 1 . 8 7 7 . 4 6 2 . 4 7 8 5 | u n f a i r a d v a n t a g e | m a g p u l i n d u s t r i e s c o r p o r a t i o n34 3534
ma
ga
zin
e a
cc
es
so
rie
s
The Speedplate is designed for all Glock 9mm and .40 caliber magazines. When attached to the base of the magazine the Speedplate can improve speed reloads and assist in fully seating the magazine.
The Magpul Generation III Enhanced Self-Leveling Follower is a drop in replacement for the issued green or black uSGI 30-round magazine followers. The 4-way anti-tilt design increases weapon reliability by eliminating many common magazine-related malfunctions. Followers are made from self-lubricating non-hygroscopic resin.
Five dimensionally correct, solid, dummy rounds made from our proprietary hard polymer. used for test feeding of magazines or other training, these can be cycled and ejected using the rifle action.
The PMAG 5 & 10 Round Limiters install in standard PMAG 20 bodies, limiting the magazine capacity to 5 or 10 rounds. Designed for sporting and hunting applications, installation of the Limiter is simple, tool-less, and requires no permanent modification of the magazine body.
≥ MODEL NAME _MAG230
SpeedplAte≥ MODEL NAME _MAG110
uSgi Follower enhAnced SelF-leveling
≥ MODEL NAME _MAG215
duMMy roundS≥ MODEL NAME _MAG280 | MAG281
pMAg 5/10 round liMiter
$14.95 | 3-PACK$5.95 | 3-PACK
$4.95 | 5-PACK$13.95 | 3-PACK
product specifications
≥ COMPATIBILITY ALL .40S&W AND 9MM GLOCK MAGAZINES
≥ NSN 1005-01-591-6113
colors
MAG230-bLK
product specifications
≥ COMPATIBILITY ALuMINuM uSGI 30-ROuND MAGAZINES
colors
MAG110-YEL MAG110-FOL
product specifications
≥ COMPATIBILITY 5.56 NATO | .223 REMINGTON
≥ NSN 1310-01-591-5927
colors
MAG215-bLK
product specifications
≥ COMPATIBILITY PMAG 20
vesrions
MAG280-bLK [5-ROuND] MAG281-bLK [10-ROuND]
<<
pr
od
uc
t \
mis
sio
n
da
ta
\\
<<
pr
od
uc
t \
mis
sio
n
da
ta
\\
<<
pr
od
uc
t \
mis
sio
n
da
ta
\\
<<
pr
od
uc
t \
mis
sio
n
da
ta
\\
37d e s i g n e d , m a n u f a c t u r e d & b u i l t i n t h e u n i t e d s t a t e s o f a m e r i c a | m a g p u l 2 0 1 2 c a t a l o gm a g p u l . c o m | 1 . 8 7 7 . 4 6 2 . 4 7 8 5 | u n f a i r a d v a n t a g e | m a g p u l i n d u s t r i e s c o r p o r a t i o n36 3736
ma
ga
zin
e a
cc
es
so
rie
s
A STUPID MAN’S REPORT OF wHAT A CLEVER MAN SAYS CAN NEVER BE ACCURATE, BECAUSE HE UNCONSCIOUSLY TRANSLATES wHAT HE HEARS INTO SOMETHING HE CAN UNDERSTAND.
-bERTRAND RuSSELL
39d e s i g n e d , m a n u f a c t u r e d & b u i l t i n t h e u n i t e d s t a t e s o f a m e r i c a | m a g p u l 2 0 1 2 c a t a l o gm a g p u l . c o m | 1 . 8 7 7 . 4 6 2 . 4 7 8 5 | u n f a i r a d v a n t a g e | m a g p u l i n d u s t r i e s c o r p o r a t i o n38
PAGE 43 | 60MOE RIFLE STOCK
PAGE 44 | 81MOE+ GRIP
PAGE 45 | 83MOE-K GRIP
PAGE 28
PMAG 30
PAGE 102
MOETRIGGERGUARD
PAGE 44 | 80MOE GRIP
PAGE 42 | 54MOE CARBINE STOCK
PAGE 91MBUS REAR
PAGE 91MBUS FRONT
PAGE 47CARBINE-LENGTH HAND GUARD
PAGE 47
MID-LENGTH HAND GUARD
PAGE 47
RIFLE-LENGTH HAND GUARD
PAGE 48 | 74
MSA
PAGE 48 | 87
RVG: RAIL VERTICAL GRIP
PAGE 45 | 86
MVG: MOE VERTICAL GRIP
PAGE 49MOE SCOUT MOUNT
PAGE 49
MOE POLYMER RAIL SECTIONS
PAGE 49MOE ILLUMINATION KIT
MAGPuL ORIGINAL EQuIPMENT (MOE) PRODuCTS ARE A LOW-COST, HIGH QuALITY ALTERNATIVE TO STANDARD WEAPON COMPONENTS.
Providing essential enhancements to weapon performance and usability, MOE products are available to manufactures as OEM equipment, and to individuals seeking Magpul quality in their basic equipment upgrades. The MOE line distinguishes itself with a simplified feature set, but maintains Magpul engineering and material quality.
moe sYsTem
NEWPRODUCT
NEWPRODUCT
NEWPRODUCT
NEWPRODUCT
41m a g p u l . c o m | 1 . 8 7 7 . 4 6 2 . 4 7 8 5 | u n f a i r a d v a n t a g e | m a g p u l i n d u s t r i e s c o r p o r a t i o n40 d e s i g n e d , m a n u f a c t u r e d & b u i l t i n t h e u n i t e d s t a t e s o f a m e r i c a | m a g p u l 2 0 1 2 c a t a l o g
COMING SPRING 2012 The MOE Rifle Stock is a simple, lightweight, cost-effective stock for the AR15/M16 and AR10/SR25 platforms, with an enhanced cheek weld, rubberized butt-pad, and internal storage compartment.
The MOE Rifle Stock is a drop-in replacement for A1 and A2 rifle stocks utilizing the standard rifle-length receiver extension (buffer tube) without the A2 spacer. Designed as a basic rifle upgrade, the stock features integral 1.25” sling loop, optional dual-side front and rear QD mounting points, replaceable anti-slip rubberized butt-pad, and internal storage compartment accessible through the rear storage door.
≥ MODEL NAME _MAG404
Moe riFle Stock$69.95
<<
pr
od
uc
t \
mis
sio
n
da
ta
\\
product specifications
≥ TUBE TYPE RIFLE buFFER TubE
≥ LOP 10.70” - 13.95”
colors
MAG404-bLK MAG404-FDE MAG404-FOL MAG404-ODG
≥ MODEL NAME _MAG400 | MAG401
Moe: cArBine Stock
The MOE Carbine Stock is a cost-effective replacement for the standard M4 stock body, offering enhanced strength and ergonomics.
The Magpul Original Equipment (MOE) stock offers Magpul engineering and material quality in an economical package. utilizing a strong A-frame design, reinforced polymer construction, streamlined exterior, rubber butt-pad, and shielded operation lever, the MOE is a drop-in replacement for the standard M4 stock body.
product specifications
≥ TUBE TYPE MILSPEC [MAG400] COMMERCIAL [MAG401]
≥ LOP 10.70” - 13.95” 10.95” - 14.75”
milspec
MAG400-bLK MAG400-FDE MAG400-FOL MAG400-ODG
commercial
MAG401-bLK MAG401-FDE MAG401-FOL MAG401-ODG
$59.95
<<
pr
od
uc
t \
mis
sio
n
da
ta
\\
NEWPRODUCT
43d e s i g n e d , m a n u f a c t u r e d & b u i l t i n t h e u n i t e d s t a t e s o f a m e r i c a | m a g p u l 2 0 1 2 c a t a l o gm a g p u l . c o m | 1 . 8 7 7 . 4 6 2 . 4 7 8 5 | u n f a i r a d v a n t a g e | m a g p u l i n d u s t r i e s c o r p o r a t i o n42 4342
mo
e s
ys
te
m
GRIP CORE COMPATIBLE PG. 89
GRIP CORE COMPATIBLE PG. 89
Designed as a drop-in upgrade for the standard AR15/M16 pistol grip, The MOE-K Grip provides a low profile, compact design and steeper grip angle compared to more traditional styles.
With a more vertical grip angle optimized for use on PDW (Personal Defense Weapon) configurations, the MOE-K Grip improves comfort and control on rifles that bring the primary hand in closer to the shooter’s body or body armor. The slim profile also makes it an excellent choice for shooters who prefer a smaller grip circumference. All mounting hardware included.
The MOE Grip provides Magpul quality, feel, and durability in an economical, drop-in upgrade for the standard AR15/M16 pistol grip. The ergonomic, hand-filling design combines aggressive texturing with storage core capability. One-piece reinforced polymer construction provides the durability needed to withstand operational environments. The MOE Grip accepts optional storage cores for gear storage. All mounting hardware included.
The MOE+ Grip combines solid, reinforced polymer body construction with comfortable, wrap-around rubber overmolding for maximum weapon control in adverse environments. Drop-in design features a hard-polymer bottom edge to reduce the possibility of equipment snags or overmold damage. The MOE+ Grip accepts optional storage cores for gear storage. All mounting hardware included.
≥ MODEL NAME _MAG438
Moe-k grip≥ MODEL NAME _MAG415
Moe grip
≥ MODEL NAME _MAG416
Moe+ grip
$19.95$20.95
$23.95
product specifications
≥ wEAPON AR15/M16
colors
MAG438-bLK MAG438-FDE MAG438-FOL MAG438-ODG
product specifications
≥ wEAPON AR15/M16
colors
MAG415-bLK MAG415-FDE MAG415-FOL MAG415-ODG
product specifications
≥ wEAPON AR15/M16
colors
MAG416-bLK MAG416-FDE MAG416-FOL MAG416-ODG
<<
pr
od
uc
t \
mis
sio
n
da
ta
\\
<<
pr
od
uc
t \
mis
sio
n
da
ta
\\
<<
pr
od
uc
t \
mis
sio
n
da
ta
\\
Designed for use with MOE Hand Guards, the MVG is a basic, lightweight, cost-effective vertical foregrip that attaches directly to the MOE Hand Guard. The MVG shape is ergonomically designed for use as a traditional vertical grip, but is also optimized for use with the “thumb brake” method of shooting. All mounting hardware included.
≥ MODEL NAME _MAG413
Mvg$19.95
product specifications
≥ COMPATIBILITY ALL MOE HAND GuARDS
≥ NSN 1005-01-591-6136 (bLK ONLY)
colors
MAG413-bLK MAG413-FDE MAG413-FOL MAG413-ODG
<<
pr
od
uc
t \
mis
sio
n
da
ta
\\
NEWPRODUCT
45d e s i g n e d , m a n u f a c t u r e d & b u i l t i n t h e u n i t e d s t a t e s o f a m e r i c a | m a g p u l 2 0 1 2 c a t a l o gm a g p u l . c o m | 1 . 8 7 7 . 4 6 2 . 4 7 8 5 | u n f a i r a d v a n t a g e | m a g p u l i n d u s t r i e s c o r p o r a t i o n44 4544
mo
e s
ys
te
m
[ 1 ] [2 ] MAGPUL ORIGINAL EQUIPMENT SYSTEM COMPONENT
MOE Hand Guards are drop-in replacements for the standard plastic hand guards, with slots at the 6, 10, and 2 o’clock positions for mounting rail sections and accessories. Designed for use with piston and direct impingement gas systems, MOE Hand Guards combine the lightweight and simplicity of a standard hand guard with improved modular flexibility. Available in rifle, mid, or carbine-length models, the reinforced polymer construction provides operational durability without the weight and cost of an aluminum railed hand guard. The front extension provides additional grip length and shields operator from hot front sight assembly.
≥ MODEL NAME _MAG440 | MAG418 | MAG419
Moe hAnd guArdS$29.95 | MAG440
product specifications
≥ SIZING CARbINE - 6 3/16”MID - 8 3/16”RIFLE - 11 1/2”
MEASuRED FROM DELTA RING (1) TO HAND GuARD CAP (2)
carbine length
MAG440-bLK MAG440-FDE MAG440-FOL MAG440-ODG
mid length
MAG418-bLK MAG418-FDE MAG418-FOL MAG418-ODG
rifle length
MAG419-bLK MAG419-FDE MAG419-FOL MAG419-ODG
<<
pr
od
uc
t \
mis
sio
n
da
ta
\\
$34.95 | MAG418 $39.95 | MAG419
47d e s i g n e d , m a n u f a c t u r e d & b u i l t i n t h e u n i t e d s t a t e s o f a m e r i c a | m a g p u l 2 0 1 2 c a t a l o gm a g p u l . c o m | 1 . 8 7 7 . 4 6 2 . 4 7 8 5 | u n f a i r a d v a n t a g e | m a g p u l i n d u s t r i e s c o r p o r a t i o n46
mo
e s
ys
te
m
The MSA (MOE Sling Attachment) attaches directly to the MOE Hand Guard, providing a forward sling attachment point for the Magpul MS3 and other clip-in sling systems. Like the RSA the MSA is precision cast steel, and is Melonite finished for wear and corrosion resistance.
≥ MODEL NAME _MAG504
MSA $24.95
product specifications
≥ COMPATIBILITY ALL MOE HAND GuARDS
colors
MAG504<<
pr
od
uc
t \
mis
sio
n
da
ta
\\
≥ MODEL NAME _MAG412
rvg
product specifications
≥ COMPATIBILITY 1913 PICATINNY RAIL
≥ NSN 1005-01-591-6133
colors
MAG412-bLK MAG412-FDE MAG412-FOL MAG412-ODG
<<
pr
od
uc
t \
mis
sio
n
da
ta
\\
$24.95
Designed for use with MOE Hand Guards and standard plastic hand guards, the MOE Polymer Rail Sections allow the attachment of various rail-mounted accessories such as lights, vertical grips, etc. Available in four lengths to accommodate a wide range of accessories and mounting options.
Designed for use with Milspec 1913 Picatinny railed hand guards, the RVG is a basic, lightweight, cost-effective vertical foregrip. The RVG shape is ergonomically designed for use as a traditional vertical grip, but is also optimized for use with the “thumb brake” method of shooting. All mounting hardware included.
≥ MODEL NAME _MAG406 | MAG407 MAG408 | MAG409
Moe rAil SectionS$8.95 | MAG406
$6.95 | MAG408
product specifications
≥ COMPATIBILITY ALL MOE HAND GuARDS
versions [blk]
MAG40611 SLOTS
MAG4079 SLOTS
MAG4087 SLOTS
MAG4095 SLOTS
<<
pr
od
uc
t \
mis
sio
n
da
ta
\\
Designed for use with MOE Hand Guards, the Scout Mount allows the attachment of Surefire Scout Light Weaponlights and many 1913 Picatinny mounted lights.Made from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight, the Scout Mount also features a streamlined, low-profile design to reduce snagging. All hardware necessary for attachment to MOE Hand Guards as well as directly affixing a Scout Light is included.
The MOE Illumination Kit includes everything needed to mount a weapon light to the MOE Hand Guards. Included in the four-piece kit is a short rail section, cantilever rail mount, and Surefire compatible pressure pad mounts.
Designed for use with MOE Hand Guards the MOE Cantilever Rail allows the attachment of weapon lights in a forward position to provide more hand guard real estate and reduce barrel shadow.
≥ MODEL NAME _MAG403
Moe Scout Mount
≥ MODEL NAME _MAG402
Moe illuMinAtion kit≥ MODEL NAME _MAG437
Moe cAntilever rAil
$9.95
$19.95 $7.95
product specifications
≥ COMPATIBILITY ALL MOE HAND GuARDS
versions
MAG403-LT-bLK MAG404-RT-bLK
product specifications
≥ COMPATIBILITY ALL MOE HAND GuARDS
≥ NSN 1005-01-591-5626
versions
MAG402-bLK
product specifications
≥ COMPATIBILITY ALL MOE HAND GuARDS
versions
MAG437-bLK
<<
pr
od
uc
t \
mis
sio
n
da
ta
\\
<<
pr
od
uc
t \
mis
sio
n
da
ta
\\
<<
pr
od
uc
t \
mis
sio
n
da
ta
\\
$7.95 | MAG407
$5.95 | MAG409
NEWPRODUCT
NEWPRODUCT
49d e s i g n e d , m a n u f a c t u r e d & b u i l t i n t h e u n i t e d s t a t e s o f a m e r i c a | m a g p u l 2 0 1 2 c a t a l o gm a g p u l . c o m | 1 . 8 7 7 . 4 6 2 . 4 7 8 5 | u n f a i r a d v a n t a g e | m a g p u l i n d u s t r i e s c o r p o r a t i o n48 4948
mo
e s
ys
te
m
wHOEVER FIGHTS MONSTERS SHOULD SEE TO IT THAT IN THE PROCESS HE DOES NOT BECOME A MONSTER. AND wHEN YOU LOOK INTO THE ABYSS, THE ABYSS ALSO LOOKS INTO YOU. -FRIEDRICK NIETZSCHE
51d e s i g n e d , m a n u f a c t u r e d & b u i l t i n t h e u n i t e d s t a t e s o f a m e r i c a | m a g p u l 2 0 1 2 c a t a l o gm a g p u l . c o m | 1 . 8 7 7 . 4 6 2 . 4 7 8 5 | u n f a i r a d v a n t a g e | m a g p u l i n d u s t r i e s c o r p o r a t i o n50