lzh-1290 specifications lzh-1290-7 lzh-1290 lzh-1290-7 · capacity hook bobbin for standard hook...
TRANSCRIPT
LZH-1290LZH-1290-7(with automatic thread trimmer)1-needle, Lockstitch, Zigzag Stitching Machine with Large Hook
CM001
Juki Corporation operates an environmental management system to promote and conduct the following as the company engages in the research, development, design, sales, distribution,and maintenance of industrial sewing machines, household sewing machines, industrial robots, etc., and in the provision of sales and maintenance services for data entry systems: (1) The development of products and engineering processes that are safe
to the environment(2) Green procurement and green purchasing(3) Energy conservation (reduction in carbon-dioxide emissions)(4) Resource saving (reduction of papers purchased, etc.)(5) Reduction and recycling of waste(6) Improvement of logistics efficiency (modal shift and improvement of
packaging, packing, etc.)
SEWING MACHINERY BUSINESS UNIT✽ Specifications and appearance are subject to change without prior notice for improvement.✽ Read the instruction manual before putting the machine into service to ensure safety.✽ This catalogue prints with environment-friendly soy ink on recycle paper.
MAY, 2014 Printed in Japan(A)
2-11-1, TSURUMAKI, TAMA-SHI, TOKYO 206-8551, JAPANPHONE : (81) 42-357-2254FAX : (81) 42-357-2274http://www.juki.com
1-needle, Lockstitch, Zigzag Stitching Machine with Large Hook
LZH-1290 Series
●LZH-1290-7-0B/CP-180C
When you place ordersPlease note when placing orders, that the model name should be written as follows:
LZH1290
LZH129070B/
SC921C
Pneumatic auto lifter (Optional)
Power supplySingle-phase 100~120V3-phase 200~240VSingle-phase 200~240V (for General Export)Single-phase 200~240V (for CE)Single-phase 200~240V (for China)
CodeSDKNU
Pedal switch type (AK-145B)
Not provided
CodeB
M51N
□
□
■
CP18CCP180C
To order, please contact your nearest JUKI distributor.●
2,000 sti/min*
6mm (normal / reverse feed)
Max. 8mm (adjustable to 10mm)
By dial
35 mm
Link type
Horizontal-axis full-rotary double-capacity hook
SY1906 Nm90~ 110 (standard Nm110)
#50~ #8, B33~ B92, Nm=120/3~ 30/3
By an oiler (hook : automatic)
JUKI New Defrix Oil No.1 (equivalent to ISO VG7)
295 mm
477 mm× 178 mm
Model name
Type
Max. sewing speed
Max. stitch length
Zigzag width
Zigzag width adjustment method
Needle bar stroke
Lift of the presser foot
Thread take-up
Hook
Needle (at the time of delivery)
Thread
Lubrication
Lubricating oil
Distance from needle to machine arm
Bed size
Weight of the machine head
Automatic reverse feed function
■ Specifications
39 kg
Provided as standard
35 kg
LZH-1290
By knee lifter : 14 mm
By hand lifter : 6 mm
LZH-1290-7
With automatic thread trimmer
By knee lifter : 13 mm
By hand lifter : 6 mm
*“sti/min” stands for “Stitches per Minute.”
● LZH1290 series (without automatic thread trimmer)
● LZH1290-7 series (with automatic thread trimmer)
Machine head
Machine head
Control box Motor
Operation panel
The machine offers outstandingcapabilities for the sewing of sports shoesand leather shoes that require a widerzigzag width. The zigzag width can bequickly and easily adjusted by the dialmounted on the front face of the machine.
To ensure smooth sewing of heavymaterials, the lift of the presser foot isas high as 14 mm (13 mm for the LZH-1290-7).
By reducing the frequency of bobbinthread replacement, the newly introducedhorizontal-axis double-capacity hookcontributes to increased efficiency insewing. This feature is extremely helpfulwhen sewing with thick thread.
��� ������� �� ���� � ������
���������� � ������� ���� � �� �� ��� ������� ����� ��� � ���� � ���
14mm
1-needle, Lockstitch, Zigzag Stitching Machinewith Large Hook
Bobbin for double-capacity hook
Bobbin forstandard hook
LZH-1290With its newly incorporated triangular cam, the machine uniformlytenses thread in zigzag strokes regardless of the needle position,and the needle always enters the material at right angles. Thisprevents the needle from swaying during zigzag stitching.
���� ����� ��� �� ����������
�� � � �� �����
The machine tenses thread uniformly over the zigzag stroke to produce beautifully finishedstitches at a high speed. With its extended zigzag width, higher presser foot lift, and newlyintroduced horizontal-axis double-capacity hook, the machine upgrades the functions requiredfor the sewing of heavy materials. Equipped to handle a wider range of thread counts, themachine also delivers improved abilities for the sewing of decorative stitches and overedging.In addition, the AC servo motor/controller for the model with the automatic thread trimmer hasbeen fully reconfigured to provide higher motor power and quicker actuation, thereby ensuringsmooth operation.
��� ������� � ����� � ����� �� ��� ����� � ����� ��� ������ ���
● OptionalThe pneumatic auto-lifter comes in two different types: the knee-switch type (AK-112C) and thepedal-switch type (AK-145B). Select the type best suited for the applications of your machine.
1-needle, Lockstitch, Zigzag Stitching Machinewith Large Hook and Automatic Thread Trimmer
LZH-1290-7
● LZH-1290-7-0B / CP-180C
������� ������ ����
��� ��� �� � ��� ���� �� �������� � ��
� �������� ������� ���� ����� ��
The machine's uniquethread trimmer mechanismallows the thread trimmerto cut the thread when theneedle is either at the leftor right end of its zigzagstroke. This mechanismalso eliminates the need foradjustment even when thethread count is changed.
The machine is equippedas standard with a one-touch reverse feedmechanism. With just apress of the touch-sensitivebutton, the machine goesinto reverse feed stitchingmode. The touch-sensitivebutton is mounted at aposition where it won'tinterfere with sewingworks.
������ �� ���� � ����� �� �
※
100-93300
3-row feed dogProvided witha center guide
For frictionalmaterial
For zigzagwidth of 10 mm
100-86353 100-85751 100-98051 100-85850100-86379(Pearl-bright finish)
StandardType
Presser foot
Gauge
100-83301 100-83319 100-83525
Throat plate
100-75505 100-93318 100-75711
Zigzag width:Max. 10mm
Zigzag width:Max. 8mm
Zigzag width:Max. 6mm
Zigzag width:Max. 8mm
Zigzag width:Max. 8 mm
The pearl - brightfinish presser foothas the samesurface smoothnessas the Teflon-finishtype, but its rigidity ismarkedly superior.
Gauges other than the standard one are optionally available.
Feed dog
Remarks
※
※
※ ※
■
The machine offers outstandingcapabilities for the sewing of sports shoesand leather shoes that require a widerzigzag width. The zigzag width can bequickly and easily adjusted by the dialmounted on the front face of the machine.
To ensure smooth sewing of heavymaterials, the lift of the presser foot isas high as 14 mm (13 mm for the LZH-1290-7).
By reducing the frequency of bobbinthread replacement, the newly introducedhorizontal-axis double-capacity hookcontributes to increased efficiency insewing. This feature is extremely helpfulwhen sewing with thick thread.
��� ������� �� ���� � ������
���������� � ������� ���� � �� �� ��� ������� ����� ��� � ���� � ���
14mm
1-needle, Lockstitch, Zigzag Stitching Machinewith Large Hook
Bobbin for double-capacity hook
Bobbin forstandard hook
LZH-1290With its newly incorporated triangular cam, the machine uniformlytenses thread in zigzag strokes regardless of the needle position,and the needle always enters the material at right angles. Thisprevents the needle from swaying during zigzag stitching.
���� ����� ��� �� ����������
�� � � �� �����
The machine tenses thread uniformly over the zigzag stroke to produce beautifully finishedstitches at a high speed. With its extended zigzag width, higher presser foot lift, and newlyintroduced horizontal-axis double-capacity hook, the machine upgrades the functions requiredfor the sewing of heavy materials. Equipped to handle a wider range of thread counts, themachine also delivers improved abilities for the sewing of decorative stitches and overedging.In addition, the AC servo motor/controller for the model with the automatic thread trimmer hasbeen fully reconfigured to provide higher motor power and quicker actuation, thereby ensuringsmooth operation.
��� ������� � ����� � ����� �� ��� ����� � ����� ��� ������ ���
● OptionalThe pneumatic auto-lifter comes in two different types: the knee-switch type (AK-112C) and thepedal-switch type (AK-145B). Select the type best suited for the applications of your machine.
1-needle, Lockstitch, Zigzag Stitching Machinewith Large Hook and Automatic Thread Trimmer
LZH-1290-7
● LZH-1290-7-0B / CP-180C
������� ������ ����
��� ��� �� � ��� ���� �� �������� � ��
� �������� ������� ���� ����� ��
The machine's uniquethread trimmer mechanismallows the thread trimmerto cut the thread when theneedle is either at the leftor right end of its zigzagstroke. This mechanismalso eliminates the need foradjustment even when thethread count is changed.
The machine is equippedas standard with a one-touch reverse feedmechanism. With just apress of the touch-sensitivebutton, the machine goesinto reverse feed stitchingmode. The touch-sensitivebutton is mounted at aposition where it won'tinterfere with sewingworks.
������ �� ���� � ����� �� �
※
100-93300
3-row feed dogProvided witha center guide
For frictionalmaterial
For zigzagwidth of 10 mm
100-86353 100-85751 100-98051 100-85850100-86379(Pearl-bright finish)
StandardType
Presser foot
Gauge
100-83301 100-83319 100-83525
Throat plate
100-75505 100-93318 100-75711
Zigzag width:Max. 10mm
Zigzag width:Max. 8mm
Zigzag width:Max. 6mm
Zigzag width:Max. 8mm
Zigzag width:Max. 8 mm
The pearl - brightfinish presser foothas the samesurface smoothnessas the Teflon-finishtype, but its rigidity ismarkedly superior.
Gauges other than the standard one are optionally available.
Feed dog
Remarks
※
※
※ ※
■
LZH-1290LZH-1290-7(with automatic thread trimmer)1-needle, Lockstitch, Zigzag Stitching Machine with Large Hook
CM001
Juki Corporation operates an environmental management system to promote and conduct the following as the company engages in the research, development, design, sales, distribution,and maintenance of industrial sewing machines, household sewing machines, industrial robots, etc., and in the provision of sales and maintenance services for data entry systems: (1) The development of products and engineering processes that are safe
to the environment(2) Green procurement and green purchasing(3) Energy conservation (reduction in carbon-dioxide emissions)(4) Resource saving (reduction of papers purchased, etc.)(5) Reduction and recycling of waste(6) Improvement of logistics efficiency (modal shift and improvement of
packaging, packing, etc.)
SEWING MACHINERY BUSINESS UNIT✽ Specifications and appearance are subject to change without prior notice for improvement.✽ Read the instruction manual before putting the machine into service to ensure safety.✽ This catalogue prints with environment-friendly soy ink on recycle paper.
MAY, 2014 Printed in Japan(A)
2-11-1, TSURUMAKI, TAMA-SHI, TOKYO 206-8551, JAPANPHONE : (81) 42-357-2254FAX : (81) 42-357-2274http://www.juki.com
1-needle, Lockstitch, Zigzag Stitching Machine with Large Hook
LZH-1290 Series
●LZH-1290-7-0B/CP-180C
When you place ordersPlease note when placing orders, that the model name should be written as follows:
LZH1290
LZH129070B/
SC921C
Pneumatic auto lifter (Optional)
Power supplySingle-phase 100~120V3-phase 200~240VSingle-phase 200~240V (for General Export)Single-phase 200~240V (for CE)Single-phase 200~240V (for China)
CodeSDKNU
Pedal switch type (AK-145B)
Not provided
CodeB
M51N
□
□
■
CP18CCP180C
To order, please contact your nearest JUKI distributor.●
2,000 sti/min*
6mm (normal / reverse feed)
Max. 8mm (adjustable to 10mm)
By dial
35 mm
Link type
Horizontal-axis full-rotary double-capacity hook
SY1906 Nm90~ 110 (standard Nm110)
#50~ #8, B33~ B92, Nm=120/3~ 30/3
By an oiler (hook : automatic)
JUKI New Defrix Oil No.1 (equivalent to ISO VG7)
295 mm
477 mm× 178 mm
Model name
Type
Max. sewing speed
Max. stitch length
Zigzag width
Zigzag width adjustment method
Needle bar stroke
Lift of the presser foot
Thread take-up
Hook
Needle (at the time of delivery)
Thread
Lubrication
Lubricating oil
Distance from needle to machine arm
Bed size
Weight of the machine head
Automatic reverse feed function
■ Specifications
39 kg
Provided as standard
35 kg
LZH-1290
By knee lifter : 14 mm
By hand lifter : 6 mm
LZH-1290-7
With automatic thread trimmer
By knee lifter : 13 mm
By hand lifter : 6 mm
*“sti/min” stands for “Stitches per Minute.”
● LZH1290 series (without automatic thread trimmer)
● LZH1290-7 series (with automatic thread trimmer)
Machine head
Machine head
Control box Motor
Operation panel