lte drive test using genex probe v3.5 tutorial

LTE TDD Drive Test Using GENEX PROBE V3.5

2013-04-16 Huawei Proprietary - Restricted Distribution Page1, Total25

LTE-TDD DRIVE TEST USING

GENEX PROBE COMPLETE TUTORIAL

Prepared by : Andreas Yostina DN/[email protected]



CONTENT

A. SPESIFICATION AND SUPPORTING HARDWARE…………………… 3

1. Supporting hardware……………………………………………………. 3

2. Laptop spesification…………………………………………………….. 3

3. Supporting software…………………………………………………….. 3

B. SOFTWARE INSTALLATION ……………………………………………. 4

1. USB GPS NMEA………………………………………………………... 4

2. USB LTE MODEM E398……………………………………………….. 6

3. GENEX PROBE V3.5…………………………………………………… 10

4. HI STUDIO 1.23.0………………………………………………………. 14

5. HISI UE AGENT………………………………………………………… 16

C. LTE DRIVE TEST USING GENEX PROBE V3.5………………………. 18



A. SPESIFICATION AND SUPPORTING SOFTWARE

1. Supporting Hardware

Laptop with good condition (free of virus, malware, etc)

Laptop charger

USB GPS NMEA

USB LTE modem Huawei E398S

2. Laptop Spesification

Operating system : Windows XP SP 3

Processor Intel Core i3 and above

RAM 2GB and above

3. Supporting Software

Genex Probe 3.5 version installer

GPS NMEA driver installer

Filezilla 3.6.0.2

DU meter 5.02 driver

HISI UE agent

HI Studio 1.23.0



B. SOFTWARE INSTALLATION

1. USB GPS NMEA

Installation Procedure:

DO NOT CONNECT the GPS before installation

Choose and open PL2303_USB_Driver_for_Windows_2000_XP folder



Click PL-2303 driver installer

Click NEXT and waiting for installation, then click FINISH

After installation finish, connect the USB GPS NMEA to laptop



2. USB LTE MODEM E398

Installation procedure:

Connect the USB Modem to Laptop

After the USB modem connected, will automatically prepare to install, click NEXT

Then, click “I AGREE”



In “Choose install location”, clicks BROWSE, then choose your location to install.

After that, click NEXT

In “Choose start menu folder”, click INSTALL

After that, click FINISH



The GUI of Mobile Partner will automatically appear :

\

Click TOOLS at the upper, then click OPTION

Then, click PROFIL MANAGEMENT, click NEW



Input the Profile Name, example : LTE-TDD SITRA, APN setting : STATIC, The

Access Number: *99#. then click SAVE

Then, the interface will show like this:



3. GENEX PROBE V3.5


Choose the folder “GENEX Probe V300R005C00-Soft-Dog-Patch”

Choose and click on the SETUP inside the folder



Then click NEXT, after that on the LICENSE AGREEMENT, choose I ACCEPT

THE TERMS OF THE LICENSE AGREEMENT. Last, click NEXT

Enter the user name and password & company name, the click next. Then on the

SETUP TYPE, choose COMPLETE, then click NEXT

Then, the installation require to install the GENEX Shared, click OK, and choose

MODIFY, Then click NEXT



In SELECT FEATURE, click all of feature, then click NEXT, then GENEX

SHARED installation is finish

\

Continue for GENEX Probe installation, then after the installation wizard

complete, click YES, I WANT TO RESTART MY COMPUTER NOW, then click

finish

Then click GENEX PROBE V3.5 icon, then give the ESN number to the HUAWEI

Engineer, after get the license, click UPDATE LICENSE



Choose the license, then



4. HI STUDIO 1.23.0


Choose HI STUDIO 1.23.0 driver installer, and then click it.

Click NEXT, on the Selection Destination Location, click NEXT

Click NEXT, Then click NEXT again on the Select Components



On Select Additional Tasks, click NEXT, the on Ready to Install, click INSTALL

Then click FINISH



5. HISI UE AGENT


Double Click on the HISI UE AGENT installer, when the GUI showed, click NEXT

Click NEXT again, on the SELECT COMPONENT, click NEXT



Click NEXT, check on the Create a desktop icon, then click NEXT

After installation finish, click FINISH



C. LTE DRIVE TEST USING GENEX PROBE V3.5

1. DO NOT CONNECT Dongle and GPS before open the GENEX PROBE V3.5

2. After Probe is opened, connect LTE dongle and USB GPS



3. Then choose HISI UE agent

4. Then click CONFIGURATION > DEVICE MANAGEMENT > DEVICE CONFIGURE >

add GPS

5. Choose COM Port by see the information on Device Manager then click OK



6. Add MS, then double click on the MS, then Click OK

7. Then click to connect the device (LTE MODEM & GPS), see the state:

CONNECTED

8. Import MAP by click , then click ADD, choose the MAP which want to open,

then click OPEN



9. Create the Engineering Parameter in xls format:

10. Import Engineering Parameter: CONFIGURATION> ENGINEERING PARAMETER

MANAGEMENT> IMPORT> then choose LTE on “SYSTEM”, click BROWSE,

choose the Engineering parameter in xls format, then click OPEN

11. Then match the Probe parameter with the excel parameter



12. Open the FILEZILLA 3.6 for ftp Download test, input the connection blow:

Host : 10.1.12.149

Username : admin

Password : admin

Port : (none)

After input, click QUICKCONNECT, then choose 2 file on the right table:

1G_DL_1_from_149

1G_DL_2_from_149

After choose this 2 files, right click then click DOWNLOAD > ADD FILES TO

QUEQUE (click many times), then check the DU METER for the Download

throughput. Make sure that the throughput is up.

OPEN 3 FILEZILLA at the same time to get the maximum throughput



13. For the UPLOAD test, the procedure almost same, but the differences is: choose file

on the left side (Laptop hard drive) then, choose 2 FILE below:

1G_DL_1_from_149

1G_DL_2_from_149

After choose this 2 files, right click then click UPLOAD > ADD FILES TO QUEQUE

(click many times), then check the DU METER for the UPLOAD throughput. Make

sure that the throughput is up.

OPEN 3 FILEZILLA at the same time to get the maximum throughput



14. Next step, click START RECORD on the Genex Probe, then save the file on in

the free folder

15. To view the RF parameter, click :VIEW (on the toolbar) > LTE > RADIO

PARAMETERS



16. The Genex Probe Windows will show like this:

17. After the drive test finish, click to stop the record

18. For REPLAY the logfile, choose Logfile >open logfile, then select the datafile to be

displayed. Click on the toolbar in tehe main window. During the replay, you can

change the replay speed

lte drive test using genex probe v3.5 tutorial

Documents

lte drive test

total25 ltetdd drive

software genex probe

laptop lte tdd drive

finish lte tdd drive

new lte tdd drive test

ltetdd sitra

xp folder lte tdd drive