low profile, dual color rooftop lightbar
TRANSCRIPT
LOW PROFILE, DUAL COLORROOFTOP LIGHTBAR
• Compliance: SAE J845 Class 1; CA Title 13; ECE R65 Class 2; ECE R10; NFPA 1901 ZONE A UPPER* (*Special Order) Note: actual approvals may vary; based on actual model ordered.
• Flash Patterns: 12 x 3 Flash Modes + Custom Programming• Operating Voltage: 12VDC• Input / Wire Gauges:
Power Cable: 15.7’ 2 x +Vcc Power Wire @12AWG 2 x -GND Power Wire @12AWG
Function Harness: 15.7’ 16 x Function Wire @ 22AWG
SPECIFICATIONS
• Low profile, streamlined design maximizes fuel economy while also reducing wind noise
• New Facet-X Optics™ (patent-pending) produce brilliant, seamless output & impressive off-axis output
• Dual color inboard lightheads provide dual functionality (flood/scene, amber traffic arrow conversion)
• Full and half size inboard lightheads ensure contiguous population in all lengths (no blanks required to evenly split a color combination)
• Dual dome design utilizes just two lenses w/ a centrally located silicon coupler, easing field maintenance / lighthead reconfiguration
• UV INFUSED lenses repel & reduce the effects of harsh weather & road conditions
• Rigid aluminum base creates a sturdy base and provides optimum heat dissipation. Top aluminum plate protects interior components from the negative effects of the sun
• Available lengths: 44”, 48” & 54”
FEATURESFEATURES
• Corners: 9 LED single color, 18 LED dual color• Inboards: 3 LED single color (short), 6 LED dual color (short) 6 LED
single color (standard), 12 LED dual color (standard)• Optional: 3 LED alley light, 3 LED take-down short
LIGHTHEAD OPTIONS
888.439.1925www.brookingindustries.com
104 Liberty Center Place | St. Augustine, FL 32092
CURRENT & FUSE RATING
SUGGESTED FUSE RATING
CurrentMax. Current (A)
@12.8VDCAvg. Current (A)
@12.8VDCCorner Lighthead 1.90 / each 0.95 / each
Middle Lighthead (Standard) 1.26 / each 0.63 / each
Middle Lighthead (Short) 0.63 / each 0.32 / each
Takedown Lighthead 0.67 / each 0.61 / each
Alley Lighthead 0.67 / each 0.61 / each
Fuse Rating @12.8VDCCorner Lighthead +2.56A / each
Middle Lighthead (Standard) +1.71A / each
Middle Lighthead (Short) +0.85A / each
Takedown Lighthead +0.90A / each
Alley Lighthead +0.90A / each
CurrentMax. Power (W)
@12.8VDCAvg. Power (W)
@12.8VDCCorner Lighthead 24.27 / each 12.13 / each
Middle Lighthead (Standard) 16.18 / each 8.09 / each
Middle Lighthead (Short) 8.09 / each 4.04 / each
Takedown Lighthead 8.54 / each 7.76 / each
Alley Lighthead 8.54 / each 7.76 / each
NOTE: Total amp draw / power consumption depends on the configuration of the lightbar. Use chart to calculate the total based on your lightbar configuration.
NOTE: Please calculate the fuse requirement based on your lightbar configuration.
• LED Colors: Red, Blue, Amber, White or Green (Single or Dual Color)• Dual color stocking combinations: BW, RW, AW, BA, RA, RB. GA
(other combinations are special order)• Lens Color: Clear
COLOR OPTIONS
APPROVALS
CATitle 13
ECER10
ECER65
SAEJ595
Class 1
SAEJ845
Class 1
MOUNTS
99-LSBDM00-000 Low Profile Standard Brackets(For use w/ strap kit, contact your sales representative.)
99-LSBDM01-000 Low Profile Narrow Flat Surface Mount Brackets
99-LSBDM02-000 Low Profile Wide Flat Surface Mount Brackets
99-LSBDM03-000 2º Angle Wedge (For use with 99-LSBDM00-000)
FEATURESDIMENSIONS
FEATURESCONFIGURATIONS
▼ 43.78"
▼ 48.6"
▼53.5" 11.48"
1.69
"
ALAL
FRC
RRC
FLC
RLC
FL2FL3FL4 FL1
RL2RL3RL4 RL1
FR1 FR2 FR3 FR4
RR1 RR2 RR3 RR4
FRONT
REAR
FRONT
REAR
ALAL
FRC
RRC
FLC
RLC
FR1 FR2 FR3 FR4
RR1 RR2 RR3 RR4
FL1FL2FL3FL4
RL1RL2RL3RL4
AL AL
FRC
RRC
FLC
RLC
FL2FL3FL4 FL1FL5
RL2RL3RL4 RL1RL5
FR1 FR2 FR3 FR4 FR5
RR1 RR2 RR3 RR4 RR5
FRONT
ALAL
FRC
RRC
FLC
RLC
FL3FL4FL5
RL3RL4RL5
FR3 FR4 FR5
RR3 RR4 RR5
FRONT
REAR
TD2 FR2FL2 TD1
RR1 RR2RL2 RL1
FRONT
REAR
ALAL
FRC
RRC
FLC
RLC
TD2 FR4 FR5
RR1
FR2
RR2
FR3
RR3 RR4 RR5
TD1FL2FL3
RL2RL3
FL4FL5
RL1RL4RL5
AL AL
FRC
RRC
FLC
RLC
FL4FL5 TD1FL6
RL3RL4 RL1
FL2FL3
RL2RL5
TD2 FR4 FR5 FR6
RR1
FR2 FR3
RR2 RR3 RR4 RR5
REAR
FRONT
▼
▼
▼
▼
▼
▼
-Cable-ExitContact your local Brooking representative for information regarding standard / stocked configurations.Deviation from standard / stocked configurations will result in longer lead times.
Available Model Lengths:
Without spot beam style take-down - Utilize white LED’s for Full Front Flood (dual color model only)
With spot beam style take-down + full front flood (dual color model only)
Height & Depth: