living rooms himalayan natural salt lamp user … · 100% natural salt from the himalayas 1 cm c us...

1
100% Natural Salt from the Himalayas 1 CM C US Intertek L I S TED 120V~,60Hz 02-17 5005631 410101 MAX 40W TYPE C E12 INCANDESCENT LAMP For Household use only Dry Locations Only CONFORMS TO UL STD. 962 CERTIFIED TO CSA STD. C22.2 No.250.4 Himalayan Natural Salt Lamp USER MANUAL READ BEFORE USE. SAVE THESE INSTRUCTIONS 2 ABOUT THIS PRODUCT • This product is made from 100% natural and hand carved salt crystals imported from the Himalayan Mountains. • Due to the natural excavation process, lamp shape, color, size and weight may vary. • Each item includes a 15-watt bulb pre-installed within the lamp base. • To prevent damage during transportation, the salt lamp will arrive protected with shrink-wrap. Please remove before use. • Be cautious handling the lamp if left on for an extended period of time. The bulb will heat the salt and the surface of the lamp will become very warm. • Cord includes a twisting dimmer knob that functions as a brightness control and ON/OFF switch. • When turned on, this lamp will create a relaxing orange glow. SAFETY INSTRUCTIONS READ BEFORE USE. ALL MINERAL LAMP PRODUCTS SHOULD BE USED AS DESCRIBED IN USER MANUAL. 1. DANGER: To reduce the risk of electric shock, remove/unplug the power cord from the outlet before cleaning, adding/replacing light bulbs or moving to a new location. 2. WARNING: DO NOT USE NEAR WATER: To reduce the risk of fire or shock, do not keep the lamp near water of any sort or expose to rain or moisture. DO NOT attempt to dry lamp using a microwave oven or hair dryer. 3. FOR INDOOR USE ONLY 4. DO NOT EAT: This salt lamp is not edible, keep away from children and pets . 5. KEEP OUT OF REACH OF CHILDREN: DO NOT allow children or pets to play or chew on cables or cords. 6. Lamp and cords should be arranged neatly and away from common walking paths. 7. DO NOT allow cord or dimmer switch to be stepped on. 8. KEEP away from direct sunlight 9. KEEP cord clear from hot surfaces. 10. DO NOT add or insert any foreign items into opening of lamp. 11. DO NOT jerk, pinch or sharply bend electrical cord, especially while connected to power outlet. 12. Unplug your lamp during lightning storms or extended periods of non-use. 13. If power cord sustains any damage, stop use immediately. 14. If water damage has occurred, stop use immediately. 15. Contact Mineralamp regarding replacement parts. Copyright © 2017 by Mineralamp. All rights reserved. KEEP OUT OF REACH OF CHILDREN KEEP DRY HANDLE WITH CARE If you require a replacement part due to damage or water exposure, contact Mineralamp at 1-877-303-4405 or email [email protected] 3 Copyright © 2017 by Mineralamp. All rights reserved. CARING INSTRUCTIONS 1. Salt lamps are known to be hygroscopic, meaning they absorb moisture from the air. It is recommended that these lamps not be used in humid or moist quarters, for example shower rooms, bathrooms or humid outdoor patios. 2. If you live in a humid climate, please be aware that your lamp may absorb moisture and drip. Make sure the salt body is dry before turning on. If your lamp is slightly damp, unplug and wipe with a towel before use. 3. If you notice that your lamp is “sweating” while turned on, wipe it down with a paper towel and place a dry rag or towel evenly underneath the base. DO Not use a paper towel or any type of plate to catch the water. Puddles of water forming under or around the lamp base can increase the risk of fire and/or shock. 4. To clean and remove dust, wipe lamp gently with a slightly dampened towel or sponge. Dry with towel and allow the salt lamp time to dry before turning back on. 5. If you plan on leaving your lamp off for weeks at a time, it is recommended that you store the salt lamp within a Sealed plastic bag or container to prevent the build up of moisture within the salt. OPERATING INSTRUCTIONS Plugging in your lamp: Your Mineralamp includes a polarized plug. This means one blade will be larger than the other. When plugging in your lamp, make sure that the larger blade fits correctly into the outlet. If it does not fit, try reversing the plug. POPULAR USES Bedrooms Workspaces and offices Living Rooms Restaurants & Hotels Therapeutic & Meditative Rooms 4 Step 1: Unplug your lamp from the outlet. Note: Lamp surface and bulb may be hot, please allow time to cool. Step 2: Lay salt body onto side and carefully pull to remove plastic lamp base from bottom. Flush with Base Step 3: With plastic base facing upright, twist the unusable bulb counter-clockwise, remove and dispose. DO NOT prod or poke metal thread with finger or instrument. Step 4: Twist replacement bulb clockwise and secure into base. counter-clockwise Clockwise 5 Copyright © 2017 by Mineralamp. All rights reserved. Step 5: With lamp lying on side, carefully insert the plastic base back into the lamp body. Make sure all three plastic prongs slide fully into hole and sit flush against with wooden salt body. Step 6: place lamp upright and plug in. Flush with Base ***If you are having issues with your lamp, please contact Mineralamp directly at 1-877-303-4405 or email us at [email protected] Push in Prongs Recommended replacement bulb: 120V AC, 40W MAX, 60Hz, Candelabra E-12 base. Toll Free: 1-877-303-4405 [email protected] Bulb Replacement Instructions Copyright © 2017 by Mineralamp. All rights reserved.

Upload: vuongdan

Post on 21-Aug-2018

213 views

Category:

Documents


0 download

TRANSCRIPT

100% Natural Salt from the Himalayas

1

CM

C US

IntertekLISTED

120V~,60Hz

02-17

5005631

410101

MAX 40W TYPE C E12 INCANDESCENT LAMP

For Household use onlyDry Locations Only

CONFORMS TO UL STD. 962CERTIFIED TO CSA STD. C22.2 No.250.4

Himalayan Natural Salt LampUSER MANUAL

READ BEFORE USE. SAVE THESE INSTRUCTIONS

2

ABOUT THIS PRODUCT• This product is made from 100% natural and hand carved salt crystals imported from the Himalayan Mountains. • Due to the natural excavation process, lamp shape, color, size and weight may vary.• Each item includes a 15-watt bulb pre-installed within the lamp base. • To prevent damage during transportation, the salt lamp will arrive protected with shrink-wrap. Please remove before use.• Be cautious handling the lamp if left on for an extended period of time. The bulb will heat the salt and the surface of the lamp will become very warm. • Cord includes a twisting dimmer knob that functions as a brightness control and ON/OFF switch. • When turned on, this lamp will create a relaxing orange glow.

SAFETY INSTRUCTIONS

READ BEFORE USE. ALL MINERAL LAMP PRODUCTS SHOULD BE USED AS DESCRIBED IN USER MANUAL.1. DANGER: To reduce the risk of electric shock, remove/unplug the power cord from the outlet before cleaning, adding/replacing light bulbs or moving to a new location. 2. WARNING: DO NOT USE NEAR WATER: To reduce the risk of fire or shock, do not keep the lamp near water of any sort or expose to rain or moisture. DO NOT attempt to dry lamp using a microwave oven or hair dryer. 3. FOR INDOOR USE ONLY 4. DO NOT EAT: This salt lamp is not edible, keep away from children and pets. 5. KEEP OUT OF REACH OF CHILDREN: DO NOT allow children or pets to play or chew on cables or cords.

6. Lamp and cords should be arranged neatly and away from common walking paths. 7. DO NOT allow cord or dimmer switch to be stepped on.8. KEEP away from direct sunlight 9. KEEP cord clear from hot surfaces.10. DO NOT add or insert any foreign items into opening of lamp. 11. DO NOT jerk, pinch or sharply bend electrical cord, especially while connected to power outlet. 12. Unplug your lamp during lightning storms or extended periods of non-use. 13. If power cord sustains any damage, stop use immediately.14. If water damage has occurred, stop use immediately.15. Contact Mineralamp regarding replacement parts.

Copyright © 2017 by Mineralamp. All rights reserved.

KEEP OUT OF REACHOF CHILDREN

KEEP DRY

HANDLEWITH CARE

If you require a replacement part due to damage or water exposure, contact Mineralamp at 1-877-303-4405 or email [email protected]

3Copyright © 2017 by Mineralamp. All rights reserved.

CARING INSTRUCTIONS1. Salt lamps are known to be hygroscopic, meaning they absorb moisture from the air. It is recommended that these lamps not be used in humid or moist quarters, for example shower rooms, bathrooms or humid outdoor patios.

2. If you live in a humid climate, please be aware that your lamp may absorb moisture and drip. Make sure the salt body is dry before turning on. If your lamp is slightly damp, unplug and wipe with a towel before use.

3. If you notice that your lamp is “sweating” while turned on, wipe it down with a paper towel and place a dry rag or towel evenly underneath the base. DO Not use a paper towel or any type of plate to catch the water. Puddles of water forming under or around the lamp base can increase the risk of fire and/or shock.

4. To clean and remove dust, wipe lamp gently with a slightly dampened towel or sponge. Dry with towel and allow the salt lamp time to dry before turning back on.

5. If you plan on leaving your lamp off for weeks at a time, it is recommended that you store the salt lamp within a Sealed plastic bag or container to prevent the build up of moisture within the salt.

OPERATING INSTRUCTIONS

Plugging in your lamp:

Your Mineralamp includes a polarized plug. This means one blade will be larger than the other. When plugging in your lamp, make sure that the larger blade fits correctly into the outlet. If it does not fit, try reversing the plug.

POPULAR USESBedroomsWorkspaces and officesLiving RoomsRestaurants & HotelsTherapeutic & Meditative Rooms

4

Step 1: Unplug your lamp from the outlet.Note: Lamp surface and bulb may be hot, please allow time to cool.

Step 2: Lay salt body onto side and carefully pull to remove plastic lamp base from bottom.

Flush with Base

Step 3: With plastic base facing upright, twist the unusable bulb counter-clockwise, remove and dispose. DO NOT prod or poke metal thread with finger or instrument.

Step 4: Twist replacement bulb clockwise and secure into base.

counter-clockwise

Clockwise

5Copyright © 2017 by Mineralamp. All rights reserved.

Step 5: With lamp lying on side, carefully insert the plastic base back into the lamp body. Make sure all three plastic prongs slide fully into hole and sit flush against with wooden salt body.

Step 6: place lamp upright and plug in.

Flush with Base

***If you are having issues with your lamp, please contact Mineralamp directly at 1-877-303-4405 or email us at [email protected]

Push in Prongs

Recommended replacement bulb: 120V AC, 40W MAX, 60Hz, Candelabra E-12 base.

Toll Free: [email protected]

Bulb Replacement Instructions

Copyright © 2017 by Mineralamp. All rights reserved.