list 3 approved manufacturers of steel forgingsapprovals... · maximum approved forging weight. the...

67
© Lloyd’s Register Group Limited 2018. All rights reserved. This lists identifies forges approved by Lloyd’s Register Group Limited (LR) for the manufacture of steel forgings in accordance with the requirements of LR's Rules for the Manufacture, Testing and Certification of Materials, Chapter 5. The information listed for each forge is a summary and includes the types of steel and maximum approved forging weight. The types of steel include: carbon carbon-manganese alloy austenitic stainless martensitic stainless The list also includes firms approved for manufacturing using powder metallurgy. Where required further information should be obtained from the current certificate of approval issued to the manufacturer by LR. Works designated "MQS Approved" are also approved under the Materials Quality Scheme in accordance with LR's Rules for the Manufacture, Testing and Certification of Materials, Chapter 1 Section 2. Approval only covers the manufacturing location listed, it does not extend to other forges owned by the same company. The local LR surveying office is also listed. Lloyd's Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. List 3 Approved Manufacturers of Steel Forgings As at 04 June 2018

Upload: vuque

Post on 20-Apr-2018

322 views

Category:

Documents


9 download

TRANSCRIPT

© Lloyd’s Register Group Limited 2018. All rights reserved.

This lists identifies forges approved by Lloyd’s Register Group Limited (LR) for themanufacture of steel forgings in accordance with the requirements of LR's Rules for theManufacture, Testing and Certification of Materials, Chapter 5.

The information listed for each forge is a summary and includes the types of steel andmaximum approved forging weight. The types of steel include:

carboncarbon-manganese alloyaustenitic stainlessmartensitic stainless

The list also includes firms approved for manufacturing using powder metallurgy.

Where required further information should be obtained from the current certificate ofapproval issued to the manufacturer by LR.

Works designated "MQS Approved" are also approved under the Materials Quality Schemein accordance with LR's Rules for the Manufacture, Testing and Certification of Materials,Chapter 1 Section 2.

Approval only covers the manufacturing location listed, it does not extend to other forgesowned by the same company.

The local LR surveying office is also listed.

Lloyd's Register Group Limited, its affiliates and subsidiaries and their respective officers,employees or agents are, individually and collectively, referred to in this clause as 'Lloyd'sRegister'. Lloyd's Register assumes no responsibility and shall not be liable to any personfor any loss, damage or expense caused by reliance on the information or advice in thisdocument or howsoever provided, unless that person has signed a contract with therelevant Lloyd's Register entity for the provision of this information or advice and in thatcase any responsibility or liability is exclusively on the terms and conditions set out in thatcontract.

List 3

Approved Manufacturers

of Steel Forgings

As at 04 June 2018

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

Austria

5.00carbon ViennaForgingsSCHMIEDETECHNIK BREITENFELD GmbH5.00carbon-manganese5.00alloy5.00austenitic stainless5.00duplex stainless*

Tel +43 (0)3858 6161 231 Fax +43 3858 6161 248 Email: [email protected] Web: http://www.breitenfeld.atCertificate #: MD00/3257/0005/3 Expiry date: 06/06/2018

8662 St. Barbara im MürztalBreitenfelderstrasse 22

45.00carbon ViennaForgingsVOESTALPINE BÖHLER EDELSTAHL GmbH & Co KG45.00carbon-manganese45.00alloy

Tel: +43 3862 20 7274 Fax: +43 3862 20 37559 Email: mailto: [email protected] Web:http://www.bohler-edelstahl.comCertificate # MD00/0200/0005/3 Expiry date: 20/01/2021

Postfach 96A-8605 Kapfenberg

Mariazellerstraße 25

0.70carbon ViennaForgingsvoestalpine BÖHLER Aerospace GmbH & Co. KG0.70carbon-manganese0.70alloy0.70austenitic stainless

Tel: +43 3862 20 6583 Fax: +43 3862 20 7634 email: :[email protected] web: www.bohler-forging.com

Certificate #: MD00/2062/0008/3 Expiry date: 20/01/2021

Ni-based alloys accepted for approved applications

Mariazellerstaße 25Postfach 96A-8605 Kapfenberg

Belgium

4.00carbon AntwerpForgingsARCELOR MITTAL RINGMILL SA4.00carbon-manganese4.00alloy

Tel: +32 (0) 4330 3578

E-mail: [email protected]

Website: www.arcelormittalringmill.be

Certificate Number: MD00/0327/0008/3 Expiry: 07/09/2020

B-4100 SeraingB.P. 65

0.37austenitic stainless AntwerpForgingsHERTECANT FLANGES N.V.0.37duplex stainless*

Tel: +32 015 22 49 10 or +32 15229194 Fax: +32 015 22 55 88email::[email protected]: www.hertecantflanges.comCertificate #: MD00/0667/0007/3 Expiry date: 24/09/2019

Lossing 222260 Heultje-Westerlo

Brazil

20.00carbon Rio de JaneiroForgingsAÇOFORJA INDÚSTRIA DE FORJADOS S.A.20.00carbon-manganese

Tel: +55 31 3649 1706 Fax: +55 31 3649 1717 M +55 31 8459 3220 EMail: mailto:[email protected]: www.acoforja.com.br Certificate #: MD00/3860/0003/3 Expiry date: 27/11/2016

Av. Engenheiro Januário Alvarenga Santos, No. 300Distrito Industrial Celso MelloSanta Luzia, MG, 33040-220

As at 04 June 2018 2Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

0.15carbon São PauloForgingsTHYSSENKRUPP METALÚRGICA CAMPO LIMPO LTDA.0.15carbon-manganese0.15alloy

Tel: +55 11 4039 9000 Fax: +55 11 4039 9911 Email: [email protected] Web: http://www.thyssenkrupp-metalurgica.comCertificate #: MD00/0898/0007/3 Expiry date: 02/03/2018

Av. Alfried Krupp 1050Campo Limpo Paulista, SPCEP 13231-900

0.08carbon São PauloForgingsTHYSSENKRUPP METALÚRGICA SANTA LUZIA0.08carbon-manganese0.08alloy

Tel: +55 31 3649 5116 Fax: +55 31 3649 5040 Email mailto:[email protected]: http://www.thyssenkrupp-metalurgica.comHeat treatment is not covered in the scope of approvalCertificate #: MD00/2996/0004/3 Expiry date: 08/07/2015

Santa Luzia -MGMinas Gerais 33045-170CEP 33045-170

Av. Dr Ângelo Teixeira da Costa 2164

Bulgaria

10.00carbon SofiaForgingsRADOMIR METAL INDUSTRIES JSC10.00carbon-manganese

Tel: 359 77780489 Fax: 359 77782134email: [email protected] web: radomir-metal-industries.com

Certificate No: MD00/4386/0001/3 Expiry Date: 17/09/2017

2400 Radomir,

Canada

15.00carbon TorontoForgingsCANADA FORGINGS INC.15.00carbon-manganese

Tel: +1 905 735 1220 Fax: +1 905 735 6992 Email mailto:[email protected] Web http://www.canforge.comCertificate #: MD00/3253/0004/3 Expiry date: 03/08/2018

130 Hagar StWellandOntario L3B 5P8

P.O. Box 308

Chile

2.50carbon ValparaisoForgingsFORJADOS S.A.2.50carbon-manganese2.50alloy

Tel: +562 7511500 Email: [email protected] Web page: www.forjados.clApproval is restricted to shaft and shaft type forgings to 460mm diameter and nominal 3500mm length to maximum weight shown above.Mechanical testing is carried out by approved test houses.Certificate Number: MD00/3787/0003/3 Expiry date: 16/05/2019

Camino Santa Rosa S/NParcela 6 Ruta G-154Lampa - Santiago

China, People's Republic of

90.00carbon DalianForgingsANGANG HEAVY MACHINERY CO., LTD.90.00carbon-manganese90.00alloy

Tel: +86 412 6765212/6765217 Fax: +86 412 6765218 Email to: [email protected] Web http://www.angangzhongji.com.cnIncluding semi-built crankshafts (max. throw weight 14 tonnes)Certificate #: MD00/3471/0007/3 Expiry date: 19/05/2020

West side of Hongqi RoadAnshan, Liaoning Province114042

STEEL FORGING PLANT

As at 04 June 2018 3Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

0.11carbon DalianForgingsANSHAN SINOKOR FLANGE CO., LTD.0.11carbon-manganese0.11austenitic stainless

Tel: +86 412 2321511 Fax: +86 412 2321522Email: [email protected]: www.sinokor-flange.comCertificate #: MD00/3487/0005/3 Expiry date: 05/01/2020

Qianshan DistrictAnshan CityLiaoning Province

Anshan ChengDong Anshan Town

4.60carbon JiangyinForgingsAVIC EXCELLENCE FORGING (WUXI) Co., Ltd.4.60carbon-manganese4.60alloy

Tel: +86 510 83896510 Fax: +86 510 83896512email [email protected]: www.avic-zy.com

Certificate #: MD00/4086/0002/3 Expiry date: 04/11/2018

Wuxi City,Jiangsu Province,

Yuqi Town,

46.00carbon ZhoushanForgingsBAODING TECHNOLOGY CO., LTD.46.00carbon-manganese46.00alloy2.00austenitic stainless

Tel: +86 (0)571 8638 2518 Fax: +86 (0)571 8638 0688 Mobile: +86 115805819566email: [email protected] web: www.baoding-tech.com

Certificate #: MD00/3177/0006/3 Expiry date: 15/07/2020

Industrial Park of Tangqi Town,Yuhang District, Hanzhou City,Zhejiang Province

Hangzhou

0.02carbon JiangyinForgingsBOEN ENTERPRISES Co., Ltd0.02carbon-manganese0.02alloy

Tel: +86 510 87057901 Fax ? +86 510 87057900 Email: [email protected] ; [email protected]; http://www.boen.cnCertificate No. MD00/4033/0001/3 Expiry date: 11.06.2015

Yixing Economic Development Zone,Yixing City,Jiangsu Province,

No. 66 Qing-Yuan Road,

0.62alloy QingdaoForgingsBUCC (TIANJIN) PRESSURE EQUIPMENT

Tel: 86 22 24366600 Fax: 86 22 24366066Email: [email protected]

Approved for quench and tempered seamless pressure vessels manufactured by pipe spinning process to BS EN 14359-2006Maximum approved dimensions = 223mm o/d x 9.5mm w/t.

Certificate No. MD00/4355/0002/3 Expiry date: 01/07/2020

No. 15 baocang RoadJunliangcheng Industrial Parkdongli District, Tianjin, 300301

MANUFACTURING CO., LTD.

3.50carbon JiangyinForgingsCHANGZHOU KANGNING FORGING CO., LTD.3.50carbon-manganese3.50alloy1.10austenitic stainless

Tel: +86 519 86217231 Fax: +86 519 8823 6965 Email: [email protected] Web: http://www.czknda.comCertificate #: MD00/4620/0001/3 Expiry date: 06/10/2019

Fonggou Village, Xueyan TownWujin District, Chanzhou CityJiangsu Province, 213171

70.00carbon DalianForgingsCHINA FIRST HEAVY INDUSTRIES70.00carbon-manganese70.00alloy

As at 04 June 2018 4Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

Tel +86 452 681 1689 Fax +86 452 681 1168Email: [email protected]: www.cfhi.comIncluding semi-built crankshaftsCertificate #: MD00/3186/0006/3 Expiry date: 02/09/2020

Qiqihar CityHeilongjiang Province

Fularji District

2.00carbon WuhanForgingsCHONGQING CHANGZHENG HEAVY INDUSTRY CO LTD.2.00carbon-manganese2.00alloy

Tel: +86 23 6156 4630 Fax: +86 23 6156 3019 Email: mailto:[email protected]: www.csiccq.comCertificate #: MD00/2246/0006/3 Expiry date: 22/08/2016

Da Du KouChongqing

Fu Niu Xi

28.00carbon WuhanForgingsCHONGQING DADI HEAVY INDUSTRY MACHINERY CO., LTD.28.00carbon-manganese28.00alloy

Tel: +86 23 6771 6971 Fax: +86 23 6771 6992 Web: www.cqdfdy.com Certificate Number: MD00/4005/0002/3 Expiry date: 03/04/2018

No. 99, East Gangcheng RoadJiangbei DistrictChongqing 400026

0.01carbon WuhanForgingsCHONGQING QINGLING FORGING Co., Ltd.0.01carbon-manganese0.01alloy

Tel: +86 23 65267844 Fax: +86 23 65267844

Certificate #: MD00/3223/0004/3 Expiry date: 23/03/2018

ZhongliangshanJiulongpo DistrictChongqing

22.00carbon WuhanForgingsCHONGQING YANLIAN22.00carbon-manganese22.00alloy

Tel No. 0086 23 4726 7901 Fax No. 0086 23 4726 7922 Mob 15823453530Email: [email protected]: www.cqyanlian.comcert no. MD00/3641/0004/3 expiry date 28/03/2021

Degan Industrial ParkJiangjin,Chongqing 402284

HEAVY MACHINERY EQUIPMENT Co., Ltd.

20.00carbon WuhanForgingsCITIC Heavy Industries Company Ltd.20.00carbon-manganese

Tel: +86 (0)379 64088614 Fax: +86 (0)379 64086221 email [email protected] Web http//:www.citichc.com.Certificate #: MD00/2742/0006/3 Expiry date: 18/10/2018

Jianxi DistrictLuoyang CityHenan Province 471039

No. 206 Jianshe Road

10.00carbon WuhanForgingsCRRC ZIYANG CO., LTD.10.00carbon-manganese8.50alloy

Tel: +86 028 26282693 Fax: +86 028 26653416email: [email protected] web: www.zyloco.com

Including CGF crankshafts with K factor = 1.05 for approved applications.Certificate #: MD00/3037/0006/3 Expiry date: 25/11/2017

Sichuan ProvincePost No. 641301

Ziyang City

1.80carbon NanjingForgingsCSSC NANJING LUZHOU MACHINE CO., LTD.1.80carbon-manganese1.80alloy

As at 04 June 2018 5Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

Tel No. +86 25 84769250 Fax No. +86 25 86725609Email: [email protected] luzhou.com.cnCertificate No MD00/3537/0003/3 Expiry Date 30/06/2018

Zhong Hua Men Wai,Nanjing,PC210039

3.00carbon DalianForgingsDALIAN CHUANXIN FORGING CO LTD3.00carbon-manganese3.00alloy

Tel No: +86 411 39706151 Fax No: +86 411 39706151

Email: [email protected]

Certificate No: MD00/3845/0003/3 Expiry Date 08/10/2019

Liang-jia-dian Street, Free Trade Zone,Dalian,

Beicang Tun No 72,

2.30carbon DalianForgingsDALIAN CITY JINZHOU JINTAI FORGE FACTORY2.30carbon-manganese2.30alloy

Tel: +86 411 87854358 Fax: +86 411 87854358email: : [email protected] No: MD00/4640/0002/3 Expiry date: 12/12/2019

Jinzhou District,Liaoning Province

Friendship Street,Longwangmiao Village,

0.02carbon DalianForgingsDALIAN DV VALVE CO., LTD.0.02carbon-manganese0.02alloy

Tel: +86 411 864 22999 Fax: +86 411 864 22577 Email: [email protected] Web www.dldv.com.cn Certificate Number: MD00/3138/0005/3 Expiry date: 06/02/2020

No. 272 Yaojia StreetNanguanling, Ganjingzi DistrictDalian 116037

Dalian Daduan Forging Co., Ltd.

10.00carbon DalianForgingsDALIAN HEAVY FORGING Co,. LTD10.00carbon-manganese5.50alloy

Tel: + 86-0411-39255371 Fax: +86-0411-39268607

E-mail: [email protected]

Certificate No: MD00/4689/0001/3 Expiry Date: 19/06/2020

Dalian Economic and Technical Development Area,Liaoning Province. 116600

0.14carbon DalianForgingsDALIAN HONGQI FORGING & PRESS FACTORY0.14carbon-manganese0.14alloy0.14austenitic stainless

Tel: +86 411 8428 8865 Fax: +86 411 8428 8863 Email: [email protected] Web: http://www.hqdy.comCertificate Number: MD00/3948/0003/3 Expiry: 17/09/2020

Tangli Village, Hongqi Street,Ganjingzi District,Dalian, 116021,

8.50carbon WuhanForgingsDAYE SPECIAL STEEL CO., LTD.8.50carbon-manganese8.50alloy

Tel: +86 (0) 714 629 7888 Ext. 3729 Fax: +86 7147 629 7781 Email [email protected] Web: http://www.xinyrgang.comCertificate Number: MD00/2493/0002/3 Expiry: 14/07/2019

Huangshi CityHubei ProvincePost code: 435001

316 Huangshi Avenue

42.70carbon ZhoushanForgingsDEQIAN HANGZHONG FORGING CO. LTD.,42.70carbon-manganese42.70alloy

As at 04 June 2018 6Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

Tel no. +86 0571 58619938 Fax no. +86 0571 58619939Email: [email protected]: www.dqforging.comCertificate No: MD00/3868/0004/3 Expiry Date 27/06/2019

Lin'an CityHangzhou,Zhejiang Province, 311305

No. 8, Jingguan Avenue, Qingshan Economic Development Zone,

26.00carbon DalianForgingsDONGBEI SPECIAL SPECIAL GROUP26.00carbon-manganese26.00alloy

Tel: +86 452 680 1271 Fax: +86 452 680 1234 email: [email protected] web: bg.bmsteel.com

Certificate No: MD00/2907/0006/3 Expiry date: 27/07/2020

Qiqihar CityHeilongjiang Province

BEIMEN SPECIAL STEEL CO., LTD.Fularji District

8.00carbon DalianForgingsDONGBEI SPECIAL SPECIAL GROUP8.00carbon-manganese8.00alloy

Tel no: +86 413 668 9161 - 3668 Fax no: +86 413 6674090Web www.dtsteel.comCertificate No: MD00/3945/0003/3 Expiry date: 04/09/2020

Wanghua District,Fushun City,Liaoning Province

FUSHUN SPECIAL STEEL CO. LTD.,East No 8 Anshan Road,

53.50carbon DalianForgingsDONGBEI SPECIAL SPECIAL GROUP53.50carbon-manganese17.00alloy

Tel: +86 0411 626 93145 Fax: +86 0411 626 93037web: www.dsteel.com

Certificate No: MD00/4651/0001/3 Expiry Date: 11/01/2020

Dalian Dengshahe Coastal Industrial Zone,Jinzhou New District,Dalian, Liaoning Province,

DALIAN SPECIAL STEEL CO., LTD.No. 18 South Hebin Road,

0.02carbon WuhanForgingsDONGFENG FORGING CO., LTD.0.02carbon-manganese0.02alloy

Tel: +86 379 6407 6206 Fax: +86 379 6407 6206 Email to: [email protected] Approved as sub-contractor and forging supplier for Henan Diesel Engine Industry Co., Ltd. onlyCertificate #: MD00/3502/0003/3 Expiry date: 25/07/2017

7# Liaoning Road, Shiyan CityHubei Province

0.35carbon-manganese NantongForgingsDongtai QB Stainless Steel Co., Ltd.0.35alloy0.35austenitic stainless0.35duplex stainless0.05martensitic stainless*

Tel: +86 (0)515 85520679 Fax: +86 (0)515 85528688Email: [email protected]: www.qbfastener.comCertificate No. MD00/4670/0001/3 Expiry date: 23/02/2020

Zhouxia Industrial Park, Qindong Town,Dongtai City, Jiangsu Province, P.R.China

135.00carbon WuhanForgingsERZHONG (DEYANG) HEAVY EQUIPMENT CO., LTD135.00carbon-manganese80.00alloy

Tel: +86 838 2341754 Fax: +86 838 2340690 E-mail: [email protected]

Website: www.china-erzhong.com

Certificate No: MD00/1334/0011/3 Expiry date: 19/11/2018

460#, Zhujiang Xi Road,Deyang,Sichuan Province

As at 04 June 2018 7Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

0.08alloy DalianForgingsFIRMACO FLOURISH FORGING CO., LTD. OF INNER

Tel: +86 0472 3116744 email: [email protected] web: www.yifcdz.com

Certificate No: MD00/4707/0001/3 Expiry Date: 04/09/2020

Qing Shan District,BaoTou City,Inner Mongolia,

MONGOLIA FIRST MACHINERY GROUP CORPORATIONMin Zhu Road,

5.00carbon GuangzhouForgingsGUANGZHOU SHIPYARD CO.,LTD.,5.00carbon-manganese5.00alloy0.53austenitic stainless

Tel No: +86 757 88758521 Fax no: +86 757 88792797email : [email protected] web: www.gzs.cssc.net.comCertificate No: MD00/4167/0002/3 Expiry Date 27/05/2019

PingzhouNanhai FoshanGuangdong, 528251

FOSHAN CASTING & FORGING FACTORYPimgshen Zoom

25.00carbon NantongForgingsHAI'AN WEISHI HEAVY MACHINERY CO., LTD25.00carbon-manganese7.00alloy

Tel: +86 513 8877 3838 Fax: +86 513 8877 8866 Mobile: +86 13328080 560 Email: [email protected] Web: http://www.hawszj.comCertificate Number: MD00/4053/0002/3 Expiry: 10/07/2018

No. 199, Zhongba Road (S),Hai'an County,Jiangsu Province,

22.00carbon ZhoushanForgingsHANGZHOU STEAM TURBINE CASTING & FORGING CO LTD.,22.00carbon-manganese22.00alloy

Tel No. +86 571 890 23816 Fax: +086 571 890 23816

E-mail: [email protected]

Website: www.zjhtf.cn

Certificate No: MD00/3807/0002/3 Expiry Date: 08.08.2020

Hangzhou City,Zhejiang,311106

No.2 Road Tangqi Industrial Park,

0.20carbon WuhanForgingsINNER MONGOLIA NO. 1 MACHINERY (GROUP) CO., LTD.0.20carbon-manganese0.20alloy

Tel: +86 379 6407 6206 Fax: +86 379 6407 6206 Email to: [email protected] as sub-contractor and forging supplier for Henan Diesel Engine Industry Co., Ltd. only without final heat treatmentIncluding crankshafts with K factor > 1.05 for approved applications manufactured by the die forging processCertificate #: MD00/3498/0003/3 Expiry date: 25/07/2017

Qingshan DistrictBaotou CityInner Mongolia

Fucheng Forging Co., Ltd.

3.60alloy JiangyinForgingsJIANGSU ASIAN STAR ANCHOR CHAIN Co., Ltd

Tel: +86 523 4686 808 Fax: +86 523 4681 390 Email: [email protected] Web: http://www.anchor-chain.comCertificate Number: MD00/1974/0002/3 Expiry: 01/07/2018

JingjiangJiangsu Province

Dongxing Town, 214533

1.35carbon JiangyinForgingsJIANGSU BOYUAN MACHINERY FORGING Co., Ltd.1.35carbon-manganese1.35alloy

Tel: +86 513 8759 6888 Fax: +86 513 8759 0008 Email: [email protected] www.jj-dz.comCertificate Number: MD00/4740/0001/3 Expiry date: 01/01/2021

Jiangan Town Industry ZoneRugao CityJiangsu Province

As at 04 June 2018 8Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

7.00carbon NanjingForgingsJIANGSU HEAVY FORGING CO., LTD.7.00carbon-manganese7.00alloy0.75austenitic stainless

Tel: +86 (523) 87890355 Fax: +86 (523) 87898280email: [email protected]

Certifdicate No: MD00/3572/0007/3 Expiry date: 12/03/2021

Huangqiao Town,Taixing City,Jiangsu Province, 225472

Yinjiayuan Village,

13.00carbon JiangyinForgingsJIANGSU HONGSHENG HEAVY INDUSTRY GROUP CO., LTD.13.00carbon-manganese13.00alloy

Tel: 0086 510 80665003, Fax: 0086 510 8627 9013email: [email protected] www.hongshenghi.comCertificate #: MD00/3559/0004/3 Expiry date: 22/01/2021

Chengjiang Industry ParkJiangyin CityJiangsu Province, 214405

No. 28 Xiejing Road

16.00carbon JiangyinForgingsJIANGSU HUAWEI MACHINERY MANUFACTURING CO., LTD.16.00carbon-manganese16.00alloy

Tel No: + 00 86-515-86279977 Fax No: + 00 86-515-86279899Email: Xcg_ [email protected]: www.jshwjx.mysteel.com.cn

Certificate No. MD00/4727/0001/3 Expiry Date: 25/10/2020

99 Xiufu Road,Jianhu County, YanchengJiangsu

12.80carbon NanjingForgingsJIANGSU JINYUAN HIGH-END EQUIPMENT CO., LTD.12.80carbon-manganese3.50alloy

Tel: +86 519 87190508 Fax: +86 519 87191868 E-mail: [email protected]

Website: http://www.jinyuanforge.cn

Certificate Number: MD00/4025/0001/3 Expiry date: 16/05/2015

No. 8, Zhongguancun Road,Liyang City, Jiangsu ProvincePost Code: 213376

0.01carbon NanjingForgingsJIANGSU LEAP MACHINE CO., LTD.0.01carbon-manganese0.01alloy

Tel: +86 511 86632504 Fax: +86 511 86634018 Email: [email protected] Web: http://www.leapmachine.comCertificate No.: MD00/3513/0004/3 Expiry date: 03/08/2020

Huangtang TownDanyang CityJiangsu Province

Changli West Road No. 240

18.00carbon JiangyinForgingsJIANGSU SUNAN HEAVY MACHINERY18.00carbon-manganese18.00alloy

Tel No: +86 (0) 512 5227 5923 Fax no: +86 (0) 512 5227 3689email [email protected] No. MD00/3751/0004/3 Expiry date 05/03/2019

Dongzhang, Xingang Town,Changshu Economic Development Zone,Jiangsu,

TECHNOLOGY CO LTD.Changqing Road

108.00carbon JiangyinForgingsJIANGSU SUNAN HEAVY MACHINERY108.00carbon-manganese62.00alloy

As at 04 June 2018 9Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

Tel: +85 0512 52275923 Fax: +86 0512 51923689email: [email protected]

Certificate No. MD00/4334/0002/3 Expiry Date: 09/06/2020

Economic & Technology Development Zone,Changshu City,Jiangsu Province,

TECHNOLOGY CO LTD.No.6 XingGang Road,

21.00carbon JiangyinForgingsJIANGSU SUNSHINE FORGING Co. LTD21.00carbon-manganese13.00alloy4.50austenitic stainless

Tel: +86-519-86156369 Fax: +86-519-86159421

E-mail: [email protected]

Website: js-sunshine.com

Certificate No: md00/4580/0001/3 Expiry Date: 19/05/2019

Wujin District,Changzhou City,Jiangsu

The Industrial Zone of Xueyan Town,

12.00carbon JiangyinForgingsJIANGYIN FANGYUAN RINGLIKE12.00carbon-manganese12.00alloy

Tel: +86 510 86902996 Fax: +86 510 86238859email: [email protected] web: www.fangyuanforging.cn

Certificate #: MD00/3946/0003/3 Expiry date: 10/09/2020

Zhouzhuang Town,Jiangyin,Jiangsu Province, PC 214423

FORGING & FLANGE Co., Ltd.No. 51 Sandun East Road,

6.00carbon JiangyinForgingsJIANGYIN HENGRUN RING FORGING CO., LTD.6.00carbon-manganese0.70austenitic stainless

Tel: +86 0510 86396655 or 7717 Fax: +86 0510 8639 6333 or 6868 Email: [email protected] Web: http://hengrun-forging.comCertificate Number: MD00/4203/0002/3 Expiry: 15/07/2019

181, Zhuhuang Road,Zhutang Industrial Zone;Jiangyin, Jiangsu, PC 214415

1.00carbon JiangyinForgingsJIANGYIN HUAXI FLANGE & PIPES FITTING Co., Ltd.1.00carbon-manganese1.00austenitic stainless

Tel: +86 510 862 216551 Fax: +86 510 862 16560web: www.flange.com.cn

Certificate No: MD00/4717/0001/3 Expiry Date: 28/09/2020

No. 18 Xiaokang RoadHuashi Town, JiangyinWuxi, Jiangsu

20.00carbon JiangyinForgingsJIANGYIN NANGONG FORGING CO., LTD.20.00carbon-manganese20.00alloy

Tel: +86 510 861 80698 Fax: +86 510 861 84396web: www.ngdz.net

Certificate No: MD00/4403/0002/3 Expiry Date: 02/11/2020

Nanzha Town,Jiangyin City,Jiangsu Province,

Jinnan Industrial Zone,

22.00carbon JiangyinForgingsJIANGYIN TONGQING MACHINERY MANUFACTURE CO LTD22.00carbon-manganese22.00alloy0.80austenitic stainless

Tel No: +86 0510 86239967 Fax No: +86 010 86906237 Mobile: +86 13395168625Email: [email protected] : www.forgings.net.cnCertificate No. MD00/3685/0004/3 Expiry date 28/09/2018

Zhouzhuang TownJiangyin CityJiangsu Province 214423

No. 18 Sandun East Road

As at 04 June 2018 10Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

0.20austenitic stainless JiangyinForgingsJIANGYIN UNIQUE FLANGE MANUFACTURING CO., LTD.

Tel No 0086 510 86065399 Fax No 0086 510 86065799

Email: [email protected]

Web : www.uniqueflange.com

Certificate No. MD00/4205/0002/3 Expiry date 20/07/2019

No. 66 Haida Road, Huashi TownJiangsu Province, 214421

35.00carbon JiangyinForgingsJIANGYIN ZENKUNG FORGING CO., LTD.35.00carbon-manganese18.00alloy

Tel: +86 510 8621 5929 Fax: +86 510 8621 8523 Email: [email protected] Web: http://www.zenkungforging.comCertificate Number: MD00/3774/0004/3 Expiry: 18/04/2019

Xuxiang, Shuxin,Longsha Industrial Zone,Jiangyin, Jiangsu Province 214421, P.R. of China

0.50carbon JiangyinForgingsJIANGYIN ZHONGNAN HEAVY INDUSTRIES CO., LTD.0.50carbon-manganese0.50austenitic stainless

Tel: +86 (510) 86997071 Fax: +86 (510) 86996035 M +86 13706168395Email: [email protected]: www.znhi.com.cnCertificate #: MD00/3439/0005/3 Expiry date: 29/02/2020

High & New Technique Industries Development ZoneJiangyin CityJiangsu Province

788, Jinshan Road,

26.00carbon DalianForgingsJIANLONG BEIMAN SPECIAL STEEL CO., LTD.26.00carbon-manganese26.00alloy

Tel: +86 452 680 1271 Fax: +86 452 680 1234 email: [email protected] web: www.bg.bmsteel.com

Certificate No: MD00/4772/0001/1 Expiry date: 28/07/2020

Fularji DistrictQiqihar CityHeilongjiang Province

0.10carbon JiangyinForgingsJINGJIANG HENGYU CHEMICAL MACHINERY CO., LTD.0.10carbon-manganese0.05austenitic stainless

Tel: +86 523 82355688 Fax: +86 523 82355689 Email: [email protected] Web: http://www.jjhengyu.comCertificate #: MD00/4309/0002/3 Expiry date: 07/04/2020

East of Dunyi BridgeXilai Town, Jingjiang CityJiangsu Province 214518

2.50carbon DalianForgingsLIAONING 518 INTERNAL COMBUSTION ENGINE2.50carbon-manganese1.70alloy

Tel: +86 415 6158090 Fax: +86 415 6158894 Mob: 138 4251 8850 email : [email protected] web : www.dd518c.com

Certificate #: MD00/3470/0008/3 Expiry date: 07/06/2020

Including crankshaft with K factor>1.0 for approved applications manufactured by TR process and alloy crankshafts up to 12TApproved for alloy forgings by closed die process up t0 445kgs

Dangdong CityLiaoning ProvincePost Code: 118009

FITTING CO., LTDNo. 97, North Ring Road, Zhenxing District

5.50carbon NanjingForgingsLIYANG JINKUN FORGING & MACHINING Co., Ltd5.50carbon-manganese5.50alloy

As at 04 June 2018 11Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

Tel: +86 0519 57386007 Fax: +86 0519 87336908email; [email protected] web: www.jkforge.cn

Certificate No. MD00/4492/0001/3: Expiry Date: 23.06.2018

North Kunlun Road,Liyang City 213300,Jiangsu Province,

No 388,

13.30carbon WuhanForgingsLUOYANG SHENGJIU FORGING Co., Ltd.13.30carbon-manganese13.30alloy

Tel: +86-379-6519 0157 Fax: +86-379-6730 7619email :[email protected] web: www.lyxql.com

Certificate No: MD00/4418/0002/3 Expiry Date: 14/01/2021

Approval covers open die forgings and ring rolling.

Luoxin Industry Park,Luoyang,Henan,

Xueyuan Road,

21.00carbon WuhanForgingsLUOYANG XINGRONG INDUSTRIAL CO., LTD.21.00carbon-manganese20.00alloy

Tel: +86 15937917790 Fax: +86 379 68141083 Email: [email protected] #: MD00/3844/0004/3 Expiry date: 11/12/2019

Xiaodian, Ruyang CountyHenan ProvincePost Code: 471212

0.03carbon NanjingForgingsNANJING AUTOMOTIVE FORGING CO., LTD.0.03carbon-manganese0.03alloy

tel: 86-25-58120048 Fax: 86-25-58120099email; [email protected] web: www.njforge.comCertificate #: MD00/3290/0004/3 Expiry date: 02/12/2018

Qixia District,Nanjing,210033

XiGang

34.00carbon NanjingForgingsNANJING BODA HEAVY FORGING CO., LTD.34.00carbon-manganese32.40alloy

Tel No. +86 25 57066065 Fax No +86 25 5706 4783Mob 0086 13861720885Email: [email protected] www.asafor.comCert No. MD00/3677/0004/3 Expiry date: 11/10/2018

Liuhe DistrictNanjing CityJiangsu Province

No. 500 Jiangqiao

0.13carbon NanjingForgingsNANJING INTERNATIONAL MARINE0.13carbon-manganese0.13alloy0.13austenitic stainless0.13ferritic stainless*0.13martensitic stainless*

Tel: +86 025 52695723 Fax: +86 025 52690499email: [email protected] web: www.ims-hd.com* for approved applicationsCertificate #: MD00/3297/0004/3 Expiry date: 16/12/2018

Nanjing

EQUIPMENT & SPARES LTD. (IMS)Jiangning District

0.01carbon Shanghai PortForgingsNINGBO KAIRONG SHIP MACHINERY CO. LTD0.01carbon-manganese0.01austenitic stainless

Ningbo Kairong Machinery Co Ltd, No, Mould Road, Daqi Industry Park, Beilun Ningbo, 315806, ChinaTel: 057486111777Email: [email protected] No: MD00/4375/0002/3 Expiry date: 20/08/2020

No 86, Mould Road,Daqi Industry Park,Beilun Ningbo, 315806

Kairong

As at 04 June 2018 12Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

3.30carbon QingdaoForgingsSHANDONG IRAETA HEAVY INDUSTRY STOCK Co., Ltd.3.30carbon-manganese2.20alloy0.30austenitic stainless

Tel: +86 531 83800992 Fax: +86 531 83809527email: [email protected] web: www.shandongiraeta.cn

Certificate No: MD00/4425/0002/3 Expiry Date: 27/01/2021

Zhangqiu,Jinan,Shandong Province

No. 9001 Jiwang Road

0.40carbon QingdaoForgingsSHANDONG RUIYE FLANGE Co. LTD0.40carbon-manganese

Tel: + 86-531-83800366 Fax. 86-531-83807366

E-mail: [email protected]

Website: www.ryflange.com

Certificate No: MDOO/4603/0001/3 Expiry Date: 15/08/2019

Guanzhuang,Zhangqui City,Shandong Province. 250217.

Renjia Industrial Area,

30.00carbon QingdaoForgingsSHANDONG TAISHAN NUCLEAR POWER EQUIPMENT30.00carbon-manganese30.00alloy

Tel: +86 538 8611782 Fax: +86 538 8611063 Email mailto: [email protected] Web tttp://www.skduanya.com

Certificate No. MD00/3765/0004/3 Expiry Date: 05/04/2019

Daiyue DistrictTaian CityShandong Province

MANUFACTURING CO., LTD.Beicun, Shankou Town

0.10carbon QingdaoForgingsSHANDONG ZOUPING WANGDA0.10carbon-manganese

Tel No: +86 531 838 68889 Fax No: +86 531 838 62247Email: [email protected]: www.sdwanda.comCertificate No: MD00/4312/0002/03 Expiry date: 22/04/2020

Linchi Town,Zouping,

FORGING AND PRESSING CO., LTDBaijia,

0.15carbon ZhoushanForgingsSHANGHAI ALAFA MARINE EQUIPMENT CO., LTD.0.15austenitic stainless

Tel: +86 577 869955555 Fax: +86 574 86838000

E-mail: [email protected]

Certificate No : MD00/3132/0006/3 Expiry date: 28/01/2020

Wangzha Area, Standard Workshop of Longwan DistricWenzhou CityZhejiang Province

37.00carbon-manganese JiangyinForgingsSHANGHAI ELECTRIC (WUXI) FORGING CO., LTD.

Tel: +86 13665 182848 Fax: +86 0510 85583828 email: [email protected]

Cerificate No MD00/4482/0001/3. Expiry Date: 14/05/2018

Wuxi,Jiangsu Province,(Taihu Street Industrial Settlements),

No.99 Hehuan Road,North District of Hudai Industrial Park,

100.00carbon Shanghai PortForgingsSHANGHAI ELECTRIC SHMP CASTING & FORGING CO., LTD.100.00carbon-manganese100.00alloy

As at 04 June 2018 13Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

Tel: +86 21 34098660 Mob: +86 1891 780 4183email [email protected] web: www.sshanghai-electric.com

Including steelmaking and semi-built crankshafts

Certificate #: MD00/1345/0009/3 Expiry date: 09/04/2020

Minhang DistrictShanghai200245

1800 Jiangchuan Road

8.00carbon Shanghai PortForgingsSHANGHAI HUDONG FORGING PLANT CO., LTD.8.00carbon-manganese4.00alloy

Tel:+86 21 60450281 Fax: +86 21 60450283 email [email protected]

Certificate #: MD00/2892/0007/3 Expiry date: 10/05/2018

Nanhui Lingang Heavy Industry Zone201306

South Xinyuan Road 55

0.01carbon Shanghai PortForgingsSHANGHAI JIAODA CHUKYO FORGING & STAMPING CO LTD0.01carbon-manganese0.01alloy

Tel no +86 21 57560990 ext 244 Fax No +86 2157568855 email: [email protected] web: www.jd-forging.comCertificate Number: MD00/3726/0003/3 Expiry: 04/01/2019

Qingcun Town,Fengxian District,Shanghai

No. 508 Fengyong Road

2.60carbon Shanghai PortForgingsSHANGHAI SHENJIANG FORGING CO LTD2.60carbon-manganese2.10alloy

Tel no. +86 21 5913 5190 Fax No. +86 21 6913 4332email : [email protected] web: www.sjforging.comCertificate No MD00/3790/0003/3 Expiry date: 05/06/2017

No. 200 Jiefangdaoxihuan Road,Shanghai 201812,

0.45carbon WuhanForgingsSHANXI FORGING PLANT0.45carbon-manganese0.45alloy

Tel: +86 379 6407 6173 Fax: +86 379 6407 6206 Email to:[email protected] as sub-contractor and forging supplier for Henan Diesel Engine Industry Co., Ltd. onlyIncluding crankshafts with K factor > 1.05 for approved applications manufactured by the die forging processCertificate #: MD00/3501/0003/3 Expiry date: 25/07/2017

Nanliang Town, Yicheng CountyShanxi Province

2.00carbon DalianForgingsSHANXI GUANJIAYING FLANGE FORGING CO., LTD.2.00carbon-manganese2.00alloy2.00austenitic stainless2.00duplex stainless*

Tel: +86 350 6086464, 13753025606 Fax: +86 350 6086462 Email mailto: [email protected] #: MD00/3494/0003/3 Expiry date: 07/04/2017

Guanjiaying Industry ZoneDingxiang CountyShanxi Province 035404

12.00carbon DalianForgingsSHANXI TAIGANG STAINLESS STEEL CO., LTD.12.00carbon-manganese12.00alloy

Tel: +81 (0)351 2130108 Fax: +81 (0)351 2317595

E-mail: [email protected]

Website:tisco.com.cn

Certificate No. MD00/4240/0003/3 Expiry Date: 14/10/2019.

Approved for semi finished forged bars to 400mm maximum diameter in C, C-Mn, Alloy, Austenitic and Duplex Stainleee Steel.

No.2 Jian Caoping Street,Taiyuan City,Shanxi Province,

Section Steel Plant,

As at 04 June 2018 14Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

60.00carbon DalianForgingsSHI GANG JING CHENG EQUIPMENT DEVELOPMENT60.00carbon-manganese38.00alloy

Tel: +86 0417 3257800 Fax: +86 0417 3257905email: [email protected] web: http://www.cyedm.com.cnCertificate #: MD00/4234/0005/3 Expiry date: 08/10/2019

No. 1 Xinlian Street,Yingkou,Liaoning Province,

AND MANUFACTURING CO., LTD.

6.00carbon WuhanForgingsSICHUAN LIUHE FORGING CO., LTD.6.00carbon-manganese6.00alloy

Tel No: +86 0816 3521518 Fax No: +86 0816 3521518email: [email protected] web: www.6hdz.comCertificate No: MD00/4176/0002/3 Expiry date 08/06/2019

Baolun Road(W), Henan Industrial ParkJiangyou CitySichuan Province

0.08alloy WuhanForgingsSINOMA SCIENCE & TECHNOLOGY (JIUJIANG) CO., LTD.

Tel No: 00-86 792-4221-470, Fax No. 00-86-792-4229-759 E-mail: [email protected]

Cert No. MD00/4473/0003/3 Expiry date: 21/04/2021

Approved for seamless gas cylinder with the diameter of 267mm, thickness 6mm to ISO9809-1 for approved application

No. 138 Renmin RoadRuichangJiangxi

25.90carbon Shanghai PortForgingsSUZHOU BAOFORGING CO., LTD.25.90carbon-manganese25.90alloy

Tel: +86 0512 65085970 Fax: +86 0512 65085933email: [email protected] web: www.baoforging.cnCertificate No.: MD00/4429/0002/3 Expiry date: 30/01/2021

Suzhou CityJiangsu Province215152

Anmin Road, Panyang Industrial ParkHuangdai Town, Xiangcheng District

3.00carbon Shanghai PortForgingsSUZHOU CITY HONGSHENG FORGING CO., LTD.3.00carbon-manganese3.00alloy

Tel No. +86 512 6695 0087 Fax No. +86 512 6653 3869 Mob 13862015218Email: [email protected] www.hsspecialsteel.comCertificate No. MD00/4179/0001/3 Expiry Date 10/06/2016

Wuzhong District,Suzhou,Jiangsu Province

No.8, Yinzang Rd, Linhu Town

120.00carbon WuhanForgingsTAI YUAN HEAVY INDUSTRY CO. LTD.120.00carbon-manganese

Tel: +86 351 636 6770 Fax: +86 351 636 6750 Email: [email protected]

Web: http:\\www.tyhi.com.cn

Certificate #: MD00/3412/0006/3 Expiry date: 30/09/2019

No.53, Yuhe Street,Wanbailin District, Taiyuan City,Shanxi Province, 030024,

0.06carbon JiangyinForgingsTAIZHOU PINGSHUN FORGING Co. LTD0.03austenitic stainless

As at 04 June 2018 15Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

Tel: + 86-0523-88641085 Fax: + 86-0523-88647999

E-mail: [email protected]

Certificate No. MD00/4607/0001/3 Expiry Date: 25/08/2019

Yuduo Town,Jiangyan District, Taizhou City,Jiangsu Provence.

No. 1 Renmin Road,

0.15carbon JiangyinForgingsTAIZHOU SANLI PIPE FITTING CO., LTD.0.15carbon-manganese

Tel: +86 523 8864 6888 Fax: +86 523 8864 6999 Email: [email protected] scope of approval is restricted to forged flanges.Certificate Number: MD00/4093/0002/3 Expiry: 19/11/2018

Yuduo Industrial ParkTaizhou CityJiangsu Province

12.54carbon QingdaoForgingsTIANJIN FEB 7th CONCORD CRANKSHAFT CO., LTD.,12.54carbon-manganese12.54alloy

Tel No: +86 22 24358008 Fax No: +86 22 24358008Email: [email protected]:www.kangkude.comCertificate No: MD00/3920/0003/3 Expiry date 05/06/2020

No.649, Jintang Road,Tianjin300301

30.00carbon QingdaoForgingsTIANJIN SERI MACHINERY EQUIPMENT CO., LTD.30.00carbon-manganese30.00alloy

Tel:+86 (0)22 24943033 Fax: +86(0)22 24943033 Certificate #: MD00/4423/0001/3 Expiry date: 26/01/2018

Dongli District

No. 3, Heavy Industrial RoadHeavy Industrial Park

60.00carbon QingdaoForgingsTIANJIN TIANZHONG GIANT HEAVY INDUSTRY CO., LTD.60.00carbon-manganese14.00alloy

Tel:+86 (0)22 86885730 Fax: +86(0)22 8688 5673

emsil: [email protected] web: www.jiangtian.cn

Certificate #: MD00/4094/0003/3 Expiry date: 24/11/2018

Xiditou TownBeichen DistrictTianjin

No. 609, Jinyu Road

0.18alloy QingdaoForgingsTIANJING TIANHAI HIGH PRESSURE CONTAINER CO. LTD.

Tel: +86 22 59816618 Fax: +86 22 59816630Email: [email protected] Web: www.btic.cn

Certificate No. MD00/4343/0001/3 Expiry date: 20/06/2017Approved for forged seamles gas cylinder with the diameter of 89mm to 219mm, thickness 2.4mm to 14.3mm for approved application

No. 268 Jinbin RoadTianjin Port Free Trade Zone

Small Line

0.32alloy QingdaoForgingsTIANJING TIANHAI HIGH PRESSURE CONTAINER CO. LTD.

Tel: +86 22 59816618 Fax: +86 22 59816630Email: [email protected] Web: www.btic.cnApproved for forged seamles gas cylinder with the diameter of 219mm to 270mm, thickness 5.2mm to 14.2mm for approved applicationCertificate No. MD00/4405/0002/3 Expiry date: 01/10/2017

Tianjin Port Free Trade ZoneTianjin

406 LINENo 306 Xingang Road,

30.00carbon WuhanForgingsTIANMA (CHENGDU) RAILWAY BEARING CO., LTD30.00carbon-manganese30.00alloy

As at 04 June 2018 16Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

Including steelmaking by EAF and ingot production maxm 40T

Tel: +86 15718028399/13693478848 Fax: +86 2883632851

Email: [email protected]

Web http://www.cdtmb.com

Certificate No. MD00/4173/0003/3 Expiry date: 03/06/2016

No. 143, Xia Street (N),Chengxiang Town, Qingbaijiang District,Chengdu City , Sichuan Province. P.C. 610306

0.30carbon QingdaoForgingsTIANRUN CRANKSHAFT CO., LTD.0.30carbon-manganese0.30alloy

Tel: +86 631 898 2033 Fax: +86 631 845 1761 eail: [email protected] web: www.tianrun.comThe scope of approval includes solid forged crankshafts to the above maximum forged weight.Certificate Number: MD00/4015/0002/3 Expiry: 08/01/2019

No. 2 - 13 Tianrun RoadWendeng CityShandong Province

Numbers 1 and 2 Forging Workshops

4.00carbon DalianForgingsTIANRUN CRANKSHAFT CO., LTD.4.00carbon-manganese4.00alloy

el: +86 631 898 2033 Fax: +86 631 845 1761 eail: [email protected] web: www.tianrun.comThe scope of approval includes solid forged crankshafts to the above maximum forged weight.Certificate Number: MD00/4556/0001/3 Expiry: 28/02/2019

No. 2-13 Tianrun RoadNanhai Forging Workshops

151.00carbon QingdaoForgingsTONGYU HEAVY INDUSTRY Co., Ltd151.00carbon-manganese121.00alloy

Tel: +86 534 7520690 Fax: +86534 7521470email: [email protected] web: www.tongyuheavy.comCertificate No. MD00/3998/0004/3 Expiry date: 27/02/2021

Dezhou City,Shandong Province,

National High-Tech Industry Area,Yucheng City,

70.00carbon WuhanForgingsWUHAN HEAVY INDUSTRY70.00carbon-manganese75.00alloy

Tel: +86 27 6886 1813 Fax: +86 27 6886 1810Email wh471zg.com.cnWeb www.whzg.com.cnIncluding crankshafts with K factor > 1.0 for approved applicationsIncluding steelmaking and semi-built crankshafts (max. throw weight 12 tonnes)Certificate #: MD00/1681/0015/3 Expiry date: 02/04/2020

Qingshan DistrictWuhanHubei

CASTING AND FORGING CO., LTD.1 Wudong Street

15.00carbon WuhanForgingsWUHAN ZHONGYE MACHINERY WHOLE SET EQUIPMENT15.00carbon-manganese15.00alloy

Tel: +86 0714 370 2019 Fax: +86 0714 370 2196 Email : [email protected] #: MD00/4242/0001/3 Expiry date: 28/10/2016

Lingcheng Road No. 2Lingxiang Town, Daye CityHubei Province

Gourp Co., Ltd.DAYE BRANCH

6.50carbon WuhanForgingsWUHAN ZHONGYE YANGLUO HEAVY MACHINERY6.50carbon-manganese6.50alloy

Tel: +86 27 5131 8405 Fax: +86 27 5131 8350 Email : [email protected] #: MD00/4248/0001/3 Expiry date: 29/10/2016

Yangfa North Road No. 3Yangluo Economic Development ZoneWuhan

MANUFACTURING CO., LTD.

As at 04 June 2018 17Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

11.00carbon JiangyinForgingsWUXI BAOLU HEAVY INDUSTRY CO., LTD.11.00carbon-manganese11.00alloy

Tel +86 510 82239288 Fax +86 510 82255521Email: [email protected]: www.wxfoundry.comCertificate Number MD00/4487/0001/3 Expiry date 03/06/2018

The industry center of QianzhouHuishan DistrictWuxi, Jiangsu, 214181

8.00carbon JiangyinForgingsWUXI HONGDA HEAVY FORGING CO., LTD.8.00carbon-manganese8.00alloy

Tel no. +86 510 85390713 Fax No. +86 510 85953536email: [email protected] Cert No. MD00/4601/0001/3 Expiry date 03/08/2019

Rengang Nanquan Binhu TownBinhu District, Wuxi CityJiangsu Province

20.00carbon JiangyinForgingsWUXI PAIKE NEW MATERIALS TECHNOLOGY Co. Ltd.20.00carbon-manganese20.00alloy

Tel no. +86 510 85585219 Mob. +86 18915289513 Fax No. +86 510 85585239email: [email protected] web: www.wuxipaike.comCert No. MD00/3735/0004/3 Expiry date 24/01/2019

Hudai Industry ParkWuxi CityJiangsu Province, 214161

Lianhe Road

12.00carbon JiangyinForgingsWUXI XINGDA PETRO CHEMICAL FITTINGS Co., Ltd.12.00carbon-manganese12.00alloy2.70austenitic stainless

Tel: +86-519-8615 Fax: +86-519-8615 1615email:[email protected] http://www.wxxingda.com/

Certificate No: MD00/4515/0001/3 Expiry Date: 06/10/2018

Binhu District,Wuxi City,Jiangsu (214064)

Longyan Village,Hudai Town,

16.00carbon WuhanForgingsXINING SPECIAL STEEL CO., LTD.16.00carbon-manganese16.00alloy

Tel: 0086 0971 529 9407 Fax: 0086 0971 529 9248 Email: [email protected]: www.xntg.comCertificate #: MD00/3093/0003/1 Expiry date: 10/03/2019

No. 52 Chaidamu West RoadXiningQinghai Province, 455004

8.00carbon NanjingForgingsXUZHOU ROTHE ERDE RING MILL Co., Ltd.8.00carbon-manganese7.50alloy

Tel: +86 516 8798 0103 Fax: +86 516 8798 8090 Mob +86 15365883071 Email: [email protected]: www.xrem.cnCertificate Number: MD00/3907/0004/3 Expiry date: 24/04/2020

No. 6 Luoshan Road,Xuzhou Economic Development Zone,221004, Jiangsu,

7.50alloy NanjingHeat treatment and machiningof forgings

XUZHOU ROTHE ERDE SLEWING BEARING CO., LTD.

The scope of approval refers to the finish machining and induction surface hardening of ring bearings

Tel: +86-516-8798-9850

Fax: +86-516-8798-9946

Website: www.xreb.com

Certificate No.: MD00/4088/0002/3 Expiry Date: 07/11/2018

15 Luoshan Road,Xuzhou, Jiangsu Province 221004,

As at 04 June 2018 18Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

0.30carbon Shanghai PortForgingsYADA PIPING SOLUTION CO., LTD.0.30carbon-manganese0.30austenitic stainless0.30duplex stainless*

Tel: +86 573 8312 7333 Fax: +86 573 8312 7133web: www.cnyada.netCertificate No. MD00/4112/0004/3 Expiry Date: 19/01/2019

Xingfeng Industry Park,Jiaxing CityZhejiang

0.03carbon JiangyinForgingsYANCHENG HAITE MACHINERY TECHNOLOGY CO., LTD.0.03carbon-manganese0.03alloy0.03austenitic stainless

Tel: +86 0515 86290308 Fax: +86 0515 86292188email: [email protected] web: www.cnhaite.comCertificate No. MD00/4543/0001/3 Expiry Date: 12/01/2019Heat treatments are sub-contracted.

Jianhu County,Yancheng City,Jiangsu Province, 224700

No. 999, Jianbao Road,

0.26carbon JiangyinForgingsYANCHENG RUI YE HYDRAULIC PIPE FITTINGS CO., LTD.0.26carbon-manganese0.02austenitic stainless

Tel No: +86 515 864 20999 Fax No: +86 515 864 13333Email: [email protected]: http://www.ycrgj.comCert No: MD00/4327/0002/3 Expiry Date 27/05/2020

Jianhu CountyYancheng CityJiangsu Province 224711

Shanggang Industrial Park

18.00carbon NanjingForgingsYANGZHOU CHENGDE HEAVY INDUSTRIES CO., LTD.18.00carbon-manganese18.00alloy

Tel: +86 514 8643 2873 Fax: +86 514 8643 2738email: [email protected] www.chengdezg.com

Certificate No: MD00/4741/0001/3 Expiry Date: 03/01/2021

Yanjiang Economic Development Zone,Jiangdu,Jiangsu,

No. 1 Sanjiang Avenue,

0.50carbon WuhanForgingsYICHANG MARINE DIESEL ENGINE CO. LTD.0.50carbon-manganese0.50alloy

Tel: +86 717 646 8870 Fax: +86 717 646 8870Email: [email protected] page: www.ymd.com.cnCertificate #: MD00/1691/0008/3 Expiry date: 14/05/2016

Yichang CityHubei Province443002

93 Xiling No. 2 Road

0.80carbon JiangyinForgingsYIXING WANHUA FLANGE FORGING CO., LTD.0.80carbon-manganese0.80alloy0.80austenitic stainless

Tel No. +86 510 87844555 Email: [email protected]

Certificate No. MD00/4561/0001/3 Expiry date 29/03/2019

Wanshi Town Industrial South Centralized ZoneYixing CityJiangsu

18.00carbon JiangyinForgingsZHANGJIAGANG DESHENG FORGING CO.,LTD.18.00carbon-manganese18.00alloy3.00austenitic stainless

Tel: +86 512 585 15780 Fax: +86 512 858 15082 Email to: [email protected] Web: http://www.dsforging.com Certificate Number: MD00/4486/0001/3 Expiry: 26/05/2018

Hexing, Jinfeng TownZhangjigang CityJiangsu Province 215626

No. 3 Xingyu West Road

As at 04 June 2018 19Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

8.00carbon JiangyinForgingsZHANGJIAGANG GUANGDA SPECIAL MATERIAL Co., LTD8.00carbon-manganese8.00alloy

Tel: 0512-58390270 Fax: 0512-58456318

E-mail: [email protected]

Website: www.gdjxdz.net

Certificate No: MD00/4690/0002/3 Expiry Date: 18.06.2020

Fenghuang Town,Zhangjiagang City, Jiangsu Province.

Anqing Village,

16.50carbon JiangyinForgingsZHANGJIAGANG HAIGUO NEW ENERGY EQUIPMENT16.50carbon-manganese7.50alloy2.50austenitic stainless

Tel: +86 0512 58903388 Fax: +86 0512 58903383Email: [email protected]: www.zjghgdj.comCertificate #: MD00/4609/0002/3 Expiry date: 11/09/2019

No. 11 Jinfeng RoadNanfeng Industry ZoneZhangjiagang, Jiangsu, 215628

MANUFACTURING CO., LTD.

8.00carbon JiangyinForgingsZHANGJIAGANG HENGTONG ANNULAR FORGING8.00carbon-manganese8.00alloy2.00austenitic stainless3.50duplex stainless

Tel No. +86 0512 58331214 Fax No: +86 0152 58332696Email: [email protected] No. MD00/4155/0003/3 Expiry date 27/04/2019

No. 3 Feixiang RoadFenghuang Town, ZhangjiagangJiangsu Province

MANUFACTURE Co. LTD.

0.08carbon JiangyinForgingsZHANGJIAGANG HUARI FLANGE CO., LTD.0.08carbon-manganese0.08alloy0.08austenitic stainless

Tel: +86 512 585 38981 Fax: +86 512 585 70069 Mob +86 18662635959Email: [email protected] Web: http://www.hrflange.net.cnHeat treatment now undertaken in-house.Certificate Number: MD00/3170/0006/3 Expiry date: 25/06/2020

Jinfeng TownZhangjiagang City

No. 44 East Baixiong Road

3.00carbon JiangyinForgingsZHANGJIAGANG ZHONGHUAN HAILU3.00carbon-manganese3.00alloy

Tel: +86 0512 56913102 Fax: +86 0512 58511337Email: [email protected]: www.hlduanjian.comCertificate #: MD00/3546/0004/3 Expiry date: 04/12/2020

SPECIAL FORGINGS CO. , Ltd.Hexing Huashan Road

0.07carbon QingdaoForgingsZHANGQIU CITY SHENGLI FORGING CO., LTD.0.07carbon-manganese

Tel: +86 531 83861504 Fax: +86 531 83879698Email: [email protected] Web site: http://www.slflanges.comCertificate No.: MD00/4667/0001/3 Expiry Date: 02/03/2020

Dongzhao Village Industrial Park, Puji Town,Zhangqiu City, Shandong Province, 250206

72.00carbon Shanghai PortForgingsZHEJIANG DERUN HEAVY INDUSTRY CO., LTD.72.00carbon-manganese30.00alloy

Tel: +86 0572 88464662 Fax: +86 0572 8464668 Mobile +86 139894 92400 Email: [email protected] Web: http://www.zjdrzg.com Certificate Number: MD00/4039/0003/3 Expiry: 19/06/2018

Gouli Village, Xin'an TownDeqing County, Zhejiang ProvincePost Code: 313212

As at 04 June 2018 20Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

0.11alloy ZhoushanForgingsZHEJIANG JINDUN PRESSURE VESSEL CO., LTD.

Tel: +86 (0)575 82717268 Fax: +86 (0)575 872717268 Mob: +86 13567563172email: [email protected] web: www.jindun.ccApproved for Seamless Steel Gas Cylinders in accordance with EN 1964-1 and ISO 9809-1 only.Certificate #: MD00/3397/0004/3 Expiry date: 09/12/2019

Shangyu CityZhejiang Province312367

Xiaoyue Town

0.50austenitic stainless Shanghai PortForgingsZHEJIANG JIULI HI-TECH METALS CO., LTD.

+86 572 253 9530 Fax: +86 572 253 9396email: [email protected] web: www.jiuli.com

Certificate No: MD00/4723/0001/3 Expiry Date: 17/10/2020

Balidian Town,Wuxing District, Huzhou City,Zhejiang Province

Jiuli Stainless Steel Industrial Park,

0.02carbon Shanghai PortForgingsZHEJIANG YUEJIN MACHINE FORGING Co., LTD0.02carbon-manganese0.02alloy

Tel: +86 572-8822478 Fax: +86 572 8822488

E-mail: [email protected]

Website: www.chinayujin.com

Certificate No: MD00/4747/0001/3 Expiry Date: 06/03/2021

Wukang, Deqing.Zhejiang. 313200.

No. 269, Changhong Dong Road,

25.00carbon WuhanForgingsZHONGYUAN SPECIAL STEEL CO., LTD.25.00carbon-manganese25.00alloy

Tel: +86 (0)391 6099148 Fax: +86 (0)391 6099588email: [email protected]. web http://www.zysw.ccCertificate #: MD00/3032/0005/3 Expiry date: 18/12/2018

Includes EAF/LF/VD steelmaking and ingots in above grades to 40 tonne.

Jiyuan CityHenen ProvinceP.C 454685

Czech Republic

6.50carbon PragueForgingsBrück AM spol. s.r.o6.50carbon-manganese6.50alloy

Tel: +420 465 481 285 Fax:+420 465 481 137Email: [email protected] Website: http://www.forge-europe.comCertificate No.: MD00/4666/0001/3 Expiry date: 02/03/2020

Zámrsk 10565 43 Zámrsk

3.50carbon PragueForgingsCZECH PRECISION FORGE A.S.3.50carbon-manganese3.50alloy3.50austenitic stainless

Tel: +420 378 133 802 Fax: +420 378 132 516 email: [email protected] web www.cpforge.comCorporate address: Husova 242/9, 110 00 Prague 1Certificate #: MD00/3049/0005/3 Expiry date: 04/02/2019

301 00 PlzenTylova 1/57

125.00carbon PragueForgingsPILSEN STEEL s.r.o.125.00carbon-manganese125.00alloy

Tel: +420 378 134 225 Mob: +420 603 587 246email: [email protected] web: www.pilsensteel.cz Certificate #: MD00/1383/0006/3 Expiry date: 22/03/2020

316 00 PlzenTylova 1/57

As at 04 June 2018 21Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

8.00carbon PragueForgingsVITKOVICE HAMMERING a.s.8.00carbon-manganese8.00alloy

Tel No: +420 595 956 687 Fax No: +420 595 954 540

E-mail: [email protected]

Website: www. vitkovice.cz

Certificate No. MD00/4165/0002/3 Expiry date: 22/05/19

703 00, Ostrava - VítkoviceRuska 2887/101,

70.00carbon PragueForgingsVITKOVICE HEAVY MACHINERY a.s.70.00carbon-manganese70.00alloy

Tel: +420 595 953 153 Mob: +420 602 535 608 email: [email protected] web: www.vitkovice.cz

Certificate #: MD00/2020/0010/3 Expiry date: 29/03/2020

Including steelmaking, combined web and pin crankshafts and semi built crankshafts by die forge method up to 4 Tonne.

Ruska 2887/10170300 Ostrava-Vitkovice

10.00carbon PragueForgingsZDAS a.s. - Metallurgy Division10.00carbon-manganese10.00alloy

Tel: +420 566 643 998 Mobile: +42 602 795 859 Email: mailto:[email protected] Web:http://www.zdas.czIncluding steelmaking.Certificate #: MD00/1697/0008/3 Expiry date: 23/08/2020

Strojirenska 675/659101 Zdar nad Sazavou

Metallurgical Plant

2.00carbon PragueForgingsZVU KOVÁRNA a.s.2.00carbon-manganese2.00alloy

Tel: +420 495 822 375 Fax: +420 495 822 806 Mob: +420 604236105Email: [email protected] Web: www.kovarna.czCertificate #: MD00/2295/0008/3 Expiry date: 01/03/2020

Prazska Trida 322/4P.O. Box 21501 47 Hradec Kralove

(ZVU Forge Plant Ltd.)

Finland

2.50alloy Turku/ÅboForgingsKOMAS OY TAKOMO

Tel: +358 40 734 2786email: [email protected] web: www.komas.fiCertificate No MD00/4523/0001/3 Expiry Date: 22/10/2018

Approved for the supply of forged blanks for the maufacture of gearing. Not approved for final heat treatment or surface hardening treatments.

Onkapannu 4,40700 Jyväskylä

France

70.00carbon LyonForgingsAKERS FRANCE70.00carbon-manganese70.00alloy

Including steelmakingTel: +33 6 79 27 94 41 e mail: mailto:[email protected] web: http://www.akersrolls.comCertificate #: MD00/3386/0005/3 Expiry date: 26/05/2017

B.P. 1020057104 Thionville Cedex

USINE DE THIONVILLEChemin du Leidt

As at 04 June 2018 22Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

0.03carbon LyonForgingsANDRÉ LAURENT0.03carbon-manganese0.03alloy0.03martensitic stainless*

Tel No.0033 (0) 4 77593280 Fax No. 0033 (0) 4 77806264

E-mail: [email protected]

Website: www.andre-laurent.fr

Cert No. MD00/3646/0005/3 Expiry date: 12/12/2019

ZI du Bayon - BP 2742150La Ricamarie

250.00carbon LyonForgingsAREVA CREUSOT FORGE250.00carbon-manganese250.00alloy250.00austenitic stainless

Tel:+33 3 85 80 07 73 Mobile: +33 6 84 74 58 42 Email:mailto:[email protected]

Certificate #: MD00/2978/0005/3 Expiry date: 26/02/2018

6 allée Jean Perrin BP 11271200 LE CREUSOT

0.01carbon LyonForgingsATELIERS DES JANVES0.01carbon-manganese0.01alloy

Tel: +33 324 53 9482 Fax: +33 324 32 0207 Email: maitlto:[email protected] Web: http://www.ateliers-janves.frCertificate #: MD00/2869/0006/3 Expiry date: 30/03/2020

Avenue des MargueritesB.P. 4408120 Bogny-sur-Meuse

Z.I. de Braux

45.00carbon LyonForgingsAUBERT & DUVAL45.00carbon-manganese45.00alloy25.00austenitic stainless22.00duplex stainless*

Tel: +33 4 77 40 37 41 Email [email protected] Website: http://www.aubertduval.com*Accepted for approved applications.Certificate Number: MD00/1770/0008/3 Expiry: 25/09/2015

BP 14142704 FIRMINY CEDEX

Firminy Plant

20.00carbon LyonForgingsAUBERT & DUVAL20.00carbon-manganese20.00alloy20.00austenitic stainless

Tel: +33 4 73 67 31 27email: [email protected] www.aubertduval.comCertificate No: MD00/4537/0001/3 Expiry Date: 21/12/2018

BP 163770 Les Ancizes

Aciéries des Ancizes

0.01austenitic stainless LyonForgingsBECK TECHNOLOGIES S.A.S

Tel: +33 3 84 49 90 02 Email: [email protected].

Certificate #: MD00/4274/0002/3 Expiry date: 28/12/2019

La ChaudeauBP 1070320 Aillevillers

0.20carbon LyonForgingsCOUSIN MALICET0.20carbon-manganese

Tel: +33 3 24 37 15 15 Fax: +33 324 323040Contact: Fabien FrereEmail: [email protected]: www.beck-industries.comCertificate #: MD00/4189/0002/3 Expiry date: 24/06/2019

23 Rue Bernisseaux08120 Bogny sur Meuse

As at 04 June 2018 23Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

1.21carbon LyonForgingsFORGE DE CUSTINES ET DE TRIE-CHÂTEAU1.21carbon-manganese0.30alloy0.30austenitic stainless0.23martensitic stainless*

Tel: +33 3 83 49 49 56 Mob: +33 6 32 06 15 74email: [email protected] web: www.lebronze-alloys.com

Certificate No: MD00/4639/0001/3 Expiry No:02/09/2019

208, Boulevard de Finlande,54670 CUSTINES,

Usine de CUSTINES

45.00carbon LyonForgingsFORGITAL DEMBIERMONT S.A.S.45.00carbon-manganese45.00alloy45.00austenitic stainless

Tel: +33 3 2769 7581 Fax: +33 3 2769 7345 email: [email protected] web: www.forgital.com

Certificate #: MD00/0527/0008/3 Expiry date: 04/08/2020

4, Rue Jules CampagneBP 8959330 Hautmont

0.01alloy LyonForgingsGASCARD MARTIN PROST

Tel: +33 3 25 84 00 16 Fax: +33 3 25 90 37 35 Email: [email protected] No: MD00/4428/0001/3 Expiry date: 29/01/2018Approved for close die forging with the maximum weight of 1.4kg only

1, Chemin de Vivet52360 NEUILLY L'EVEQUE

BP1

0.30carbon LyonForgingsL'UNION DES FORGERONS0.30carbon-manganese0.30alloy0.30austenitic stainless

Tel: +33 (0) 1 64 95 02 25 Fax: +33 (0) 1 64 95 09 89 Email: mailto:[email protected] Web: http://www.union-des-forgerons.frCertificate #: MD00/3229/0004/3 Expiry date: 24/03/2018

BP 16 - Z.A.91660 Méréville

12 Rue De La Pierre Follège

0.45alloy LyonForgingsLEBRONZE ALLOYS

Tel: +33 3 2769 7581 Fax: +33 3 2769 7345 Email mailto:[email protected] Web: www.forgital.comCertificate No: MD00/4102/0003/3 Expiry date: 13/12/2020

27720 DanguUsine de Dangu

1.00carbon LyonForgingsLOIRE INDUSTRIE SAS1.00carbon-manganese1.00austenitic stainless1.00duplex stainless

Tel: + 33 (0) 477 292 000 Fax: +33 (0) 477 226 321

E-mail: [email protected]

Website: www.loire-industrie.fr

Certificate No: MDO/4754/0001/3 Expiry 08/04/2021

2 rue Michel Rondet,BP 4742406 SAINT CHAMOND CEDEX

ZI Le Clos Marquet

0.25carbon LyonForgingsMANOIR BOUZONVILLE0.25carbon-manganese0.11alloy

Tel: +33 38739 7857 Email: [email protected]: www.manoir.eu.com

Certificate: MD00/4695/0001/3 Expiry Date: 17/08/2020

Route de Guerstling57320 Bouzonville

As at 04 June 2018 24Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

3.00carbon LyonForgingsSBS3.00carbon-manganese3.00austenitic stainless

Tel: +33 4 77 96 80 00 Fax: +33 4 77 96 80 50 Email: [email protected] #: MD00/1043/0009/3 Expiry date: 04/09/2020

BP 642130 Boën sur Lignon

La Gare

0.10carbon LyonForgingsSETFORGE LA CLAYETTE SOCIETE NOUVELLE0.10carbon-manganese0.10alloy

+33 (0)3 85 28 40 16 Fax: +33 (0)3 85 28 40 01 Mob: +33 (0)6 89 95 06 78email: [email protected] web: www.farina.com

Certificate No: MD00/4661/0001/3 Expiry Date: 18/12/2018

718000 La Clayette

Germany

8.00carbon HamburgForgingsANKER SCHROEDER ASDO GmbH8.00carbon-manganese8.00alloy

Tel: +49 (0)231 51701 16 Fax: +49 (0)231 51701-816email: [email protected] web: www.anker.de

Certificate No. MD00/0107/0008/3 Expiry date: 17/11/2019

Hannöversche Straße 4844143 Dortmund

3.50carbon HamburgForgingsBAHNTECHNIK BRAND-ERBISDORF GmbH3.50carbon-manganese3.50alloy

Tel: +49 (0) 3 7322 473579 Fax: +49 (0)3 7322 473393 Email mail: [email protected] Web http://www.bt-be.deCertificate No. MD00/3147/0006/3 Expiry date: 05/01/2021

D-09618 Brand-ErbisdorfBerthelsdorfer Str. 8

10.00carbon HamburgForgingsBGH EDELSTAHL LIPPENDORF GmbH10.00carbon-manganese10.00alloy10.00austenitic stainless10.00martensitic stainless*

Tel: +49 (0) 343 42 670 Fax: +49 (0) 343 42 67230 Email: [email protected] Web: http://www.bgh.de* accepted for approved applicationsCertificate No. MD00/0145/0008/3 Expiry date: 06/11/2020

04575 LippendorfHauptstraße 100

51.00carbon HamburgForgingsBGH EDELSTAHL SIEGEN GmbH51.00carbon-manganese51.00alloy28.00austenitic stainless8.00duplex stainless*

28.00martensitic stainless*

Tel No. +49 (0)271 701-341 Fax No. +49 (0) 271 701376Email [email protected] www.bgh.deCertificate No. MD00/3767/0005/3 Expiry date: 30/03/2019

Industriestraße 9,D-57076Siegen

95.00carbon HamburgForgingsBUDERUS EDELSTAHL GmbH95.00carbon-manganese95.00alloy95.00austenitic stainless95.00martensitic stainless*

Tel: +49 (0)6441 374 2686 Fax: +49 (0)6441 374 2681 Email: mailto: [email protected] Web: http://www.buderus-steel.com

*accepted for approved applicationsCertificate No. MD00/0257/0010/3 Expiry date: 06/07/2020

Buderusstraße 25D-35573 Wetzlar

As at 04 June 2018 25Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

26.00carbon HamburgForgingsBrück GmbH Ensheim26.00carbon-manganese26.00alloy26.00austenitic stainless26.00duplex stainless

Tel: +49 6893 84 414 email: [email protected] web: www.bruck-forgings.com

Certificate No. MD00/0250/0008/3 Expiry date: 04/10/2019

Brückstrasse 16EnsheimD 66131 Saarbrücken

Spezialfabrik für Rohrverbindungen

3.00carbon HamburgForgingsCHR. HÖVER & SOHN GMBH & CO. KG3.00carbon-manganese3.00alloy3.00austenitic stainless

Tel: +49 2266 95 0 Fax: +49 2266 4371 email: [email protected] web: www.leppe-edelstahl.comCertificate No. MD00/0700/0007/3 Expiry date: 08/10/2019

Oberleppe 14D-51789 Lindlar

27.00carbon HamburgForgingsDEUTSCHE EDELSTAHLWERKE27.00carbon-manganese27.00alloy27.00austenitic stainless27.00duplex stainless27.00martensitic stainless*

Tel: +49 (0) 2302 294105email: [email protected] web: www.dew-stahl.comCertificate No. MD00/1853/0011/3 Expiry date: 20/01/2019

Oberschlesienstraße 16D-47807 Krefeld

SPECIALTY STEEL GmbH & Co. KGWorks Krefeld

1.50carbon HamburgForgingsDEUTSCHE EDELSTAHLWERKE1.50carbon-manganese1.50alloy1.50austenitic stainless1.50duplex stainless1.50martensitic stainless*

Tel: +49 (0) 2302 294 131 Fax: +49 (0) 2302 294 662 Email:mailto:[email protected] Web:http://www.dew-stahl.comCertificate No. MD00/2075/0011/3 Expiry date: 20/01/2019

Auestraße 4D-58452 Witten

SPECIALTY STEEL GmbH & Co. KGWorks Witten

0.05alloy HamburgForgingsEWALD WAFFENSCHMIDT GmbH & Co. KG0.05austenitic stainless

Tel: +49 (0)2762 92660 Email:mailto:[email protected] www.waffenschmidt.deCertificate No. MD00/0470/0007/3 Expiry date: 16/03/2018

Otto-Hahn-Str. 6D-57482 Wenden

0.37carbon HamburgForgingsFLANSCHENWERK BEBITZ GmbH.0.37carbon-manganese0.37alloy0.37austenitic stainless0.37duplex stainless*

Tel: +49 (0)34691-40-244 Fax: +49 (0)34691-40-327 Email: [email protected] Web: http://www.bebitz.deCertificate No. MD00/0497/0008/3 Expiry date: 05/10/2020

Lebendorfer Straße 1D-06420 Bebitz

0.01carbon HamburgForgingsFRAUENTHAL POWERTRAIN GmbH0.01carbon-manganese0.01alloy

As at 04 June 2018 26Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

Tel: +49 (0)2391 814-35164 E-mail: [email protected]

Website: www.frauenthal-automotive.com

Certificate No. MD00/0247/0009/3 Expiry date: 19/11/2020

Approval covers forgings in alloys 36MnVS4, 46MnVS4 and 70MnVS4

Approval covers precipitation hardened forgings for approved applications.

In den Hofwiesen 13D-58840 Plettenberg

2.00carbon HamburgForgingsFRITZ BAUMANN GmbH + Co.KG2.00carbon-manganese2.00alloy

Tel: +49 (0)7135 950326 Fax: +49 (0)7135 9503-13email: [email protected] web: www.hammerwerk-baumann-kg.deCertificate No. MD00/0648/0010/3 Expiry date: 01/06/2020

74363 Güglingen FrauenzimmernKappelrain 4

0.08carbon-manganese HamburgForgingsGEDORE WERKZEUGFABRIK GmbH & Co. KG0.08alloy

Tel: +49 2191 986-23 Fax: +49 2191 986 99

E-mail: [email protected]

Website: www.gedore.com

Certificate No. MD00/0895/0008/3 Expiry date: 29/01/2020

Lange Str. 7AD-42857 Remscheid

0.65carbon HamburgForgingsGEORG UMFORMTECHNIK GMBH0.65carbon-manganese0.65alloy

Tel: +49 (0) 2687 892-66 Fax: +49 (0) 2687 892-68 email: [email protected] web: www.georg-umformtechnik.deCertificate No. MD00/0436/0007/3 Expiry date: 27/09/2018

Grubenstraße 5D-56594 Willroth

0.08carbon HamburgForgingsGESENKSCHMIEDE SCHNEIDER GmbH0.08carbon-manganese0.08alloy0.08austenitic stainless

Tel: +49 (0)7361 597672 Fax: +49 (0)7361 597102 email: [email protected] web: www.gsa-aalen.de

Certificate No. MD00/0598/0009/3 Expiry date: 14/02/2021

Ulmer Str. 112D-73431 Aalen

0.35carbon HamburgForgingsGROßENHAINER GESENK- UND FREIFORMSCHMIEDE GmbH0.35carbon-manganese0.35alloy

Tel: +49 3522 350 17 Fax: +49 3522 631 53 email: [email protected] web:www.ggf-schmiede.deCertificate No. MD00/2029/0007/3 Expiry date: 06/07/2019

Öhringer Str. 24-26D-01558 Großenhain

10.00carbon HamburgForgingsGUSTAV GRIMM EDELSTAHLWERK GMBH & CO. KG10.00carbon-manganese10.00alloy10.00austenitic stainless10.00duplex stainless*10.00martensitic stainless*

Tel: +49 (0)2191 435 342 Fax: +49 (0)2191 435 285 email: [email protected] Web: www.gustav-grimm.deCertificate No. MD00/0613/0009/3 Expiry date: 18/09/2019

D-42855 RemscheidRonsdorfer Straße 172-174

As at 04 June 2018 27Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

15.00carbon HamburgForgingsHAMMERWERK ERFT15.00carbon-manganese15.00alloy

Tel: 0049 (0)2253 311-145 Fax: 0049 (0)2253 311-174 Email: mailto:[email protected] Web http://www.hammerwerk-erft.deCertificate No. MD00/0647/0007/3 Expiry date: 03/05/2018

D-53902 Bad Münstereifel-Arloff

G. Diederichs GmbH & Co. KGErnst-Diederichs Strasse 1

0.08carbon HamburgForgingsHAMMERWERK FRIDINGEN GMBH0.08carbon-manganese0.08alloy0.08austenitic stainless

Tel: +49 7463 81 201 Fax: +49 7463 8130 201 email: [email protected] web www.hammerwerk.deCertificate No.MD00/0646/0008/3 Expiry date: 23/07/2019

Dr.-Werner-Esser-Str. 178567 Fridingen an der Donau

0.40alloy HamburgForgingsIPP VAN TRIEL GMBH

Tel: +49 (0) 201 869 11 0 Fax: +49 (0) 201 869 1134 Email: mailto: [email protected]: http://www.vantriel.deCertificate Number: MD00/0654/0007/3 Expiry: 27/01/2019

Ripshorster Str. 460D-45357 Essen

35.00carbon HamburgForgingsKARL DIEDERICHS Group35.00carbon-manganese35.00alloy

Tel: +49 (0)202 265130 Fax: +49 (0)202 603069 Email mailto:[email protected] Web http://www.attin.deCertificate No. MD00/0126/0009/3 Expiry date: 13/09/2019

Dieselstaße 26D-42389 Wuppertal-Langerfeld

Oswald Attin KGStahlhammerwerk

35.00carbon HamburgForgingsKARL DIEDERICHS Group35.00carbon-manganese35.00alloy

Tel: +49 (0)2191 593 216 Fax: +49 (0)2191 593 208 email: [email protected] web: www.dirostahl.deCertificate No. MD00/0408/0007/3 Expiry date: 13/09/2019

Luckhauser Straße 1-5D-42899 Remscheid

Karl Diederichs KGStahl-, Walz- und Hammerwerk

35.00carbon HamburgForgingsKARL DIEDERICHS Group35.00carbon-manganese35.00alloy

Tel: +49 (0)2191 593 216 Fax: +49 (0)2191 593 208 email [email protected] web www.jansenstahl.deCertificate No. MD00/0788/0009/3 Expiry date: 13/09/2019

Walter-Freitag-Straße 37

August Jansen KGStahl- und Hammerwerk

35.00carbon HamburgForgingsKARL DIEDERICHS Group35.00carbon-manganese35.00alloy

Tel: +49 (0)202 6087521 Fax: +49 (0)202 6087 5821 Email:[email protected] Web http://www.soenneckenstahl.deCertificate No. MD00/1401/0008/3 Expiry date: 14/09/2016

Blombacher Bach 12D-42287 Wuppertal

Wilh. Sönnecken KGStahlhammerwerk

0.13carbon HamburgForgingsKB SCHMIEDETECHNIK GmbH0.13carbon-manganese0.13alloy0.13austenitic stainless

Tel: +49 (0)2331 3508-19 Fax: +49 (0)2331 3508-30 Email:[email protected] Web:www.kb-schmiedetechnik.deCertificate No. MD00/0858/0008/3 Expiry date: 13/08/2020

Buschmühlenstraße 62D-58093 Hagen-Halden

As at 04 June 2018 28Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

5.50carbon HamburgForgingsKOLLMEDER SCHMIEDE- und PRESSWERK GmbH & CO.KG5.50carbon-manganese

14.00alloy

Tel No: +49 871 975390 Fax No: +49 871 9753940email: [email protected] web: www.kollmeder-presswerk.deCertificate No MD00/3870/0003/3 Expiry Date 01/01/2020

Zettlstraße 1D-84030Ergolding

17.00carbon HamburgForgingsMASCHINENFABRIK ALFING KESSLER GmbH17.00carbon-manganese17.00alloy3.67martensitic stainless*

Tel: +49 7361 501-4435 Fax: +49 7361 501-1970

E-mail: ingo.gerneth@@mafa.alfing.de

Website: www.alfing.de

Including crankshafts with a K factor >=1.0 for approved applications. Closed die and continuous grain flow forged crankshafts with a K factor K1 = 1.05

Closed die and continuos grain flow forged crankshafts made with Alfing Clean Steel with a K factor K1 = 1.15 for alloy steel with a minimum tensile strengthrequirement of 850 MPa.

-Plus induction hardening including fillets K2 = 1.15- Plus hammer peening process K2=1.20- Plus Nitriding including fillets K2 = 1.25

Materials Quality Scheme Approved - Approval No. MQS 023

Certificate No. MD00/0091/0009/3 Expiry date: 12/07/2019

WasseralfingenAuguste-Kessler Str. 20D-73433 Aalen

1.50carbon HamburgForgingsPLATESTAHL UMFORMTECHNIK GmbH1.50carbon-manganese1.50alloy1.50austenitic stainless1.50duplex stainless

Tel +49 2351 4390 Fax: +49 2351 439 355Email: [email protected] Web: www.platestahl.comCertificate No. MD00/4622/0001/3 Expiry date: 12/10/2019

58513 LüdenscheidPlatehofstraße 1

0.12carbon HamburgForgingsRICHARD NEUMAYER GESELLSCHAFT0.12carbon-manganese0.12alloy0.05austenitic stainless0.05duplex stainless

Tel: +49 (0)7831 803 982 Fax: +49 (0)7831 803 66

E-mail: [email protected]

Website: www.r-neumayer.de

Certificate No. MD00/3509/0005/3 Expiry date: 26/05/2020

Hinterer Bahnhof 15D-77756 Hausach

FÜR UMFORMTECHNIK mbH

4.00carbon HamburgForgingsROSSWAG GmbH4.00carbon-manganese4.00alloy4.00austenitic stainless4.00duplex stainless4.00martensitic stainless*

Tel: +49 7240 94142 Email: mailto: [email protected] Web page http://www.edelsthal-rosswag.de* accepted for approved applicationsCertificate No. MD00/0435/0009/3 Expiry date: 05/07/2018

76327 PfinztalAugust-Roßwag-Straße 1

120.00carbon HamburgForgingsSAARSCHMIEDE GmbH FREIFORMSCHMIEDE120.00carbon-manganese

Tel:+49 (0)6898 10 2215 Fax:+49(0)6898 10 5 2215 email: [email protected] web: www.saarschmiede.com

Certificate No. MD00/2017/0008/3 Expiry date: 12/05/2020

Bismarckstraße 57-59D-66330 Völklingen

As at 04 June 2018 29Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

0.40carbon HamburgForgingsSCHMIEDAG GmbH0.40carbon-manganese0.40alloy0.40austenitic stainless

Tel: +49 (0)2331 128-300 Fax: +49 (0)2331 128-234 Email to: [email protected]; [email protected]; [email protected]: http://www.schmiedag.deCertificate No. MD00/0120/0008/3 Expiry date: 07/10/2017

D-58089 HagenGrüntaler Straße 11

45.00carbon HamburgForgingsSCHMIEDEWERKE GRÖDITZ GmbH45.00carbon-manganese45.00alloy45.00austenitic stainless

Tel: +49 (0) 35263 62970 Fax: +49 (0) 35263 62973 EMail mailto: [email protected] Web page http://www.stahl-groeditz.deThe scope of approval includes crankshafts produced by conventional forging in the material grades and to the maximum weight detailed above, and also forcrankshafts produced by the TR Process in alloy steel grades only to a maximum weight of 42 Tonnes.Certificate No. MD00/0615/0012/3 Expiry date: 11/03/2020

D-01609 GröditzRiesaer Straße 1

1.10carbon HamburgForgingsSIEPMANN-WERKE GmbH & Co.KG1.10carbon-manganese1.10alloy1.10austenitic stainless

Tel: +49 2902 762 567 Fax: +49 2902 762 633 Email: mailto:[email protected] Web:http://www.siepmann.deCertificate #: MD00/1378/0008/3 Expiry date: 07/05/2017

Emil-Siepmann-Str. 28D-59581 Warstein

0.35carbon HamburgForgingsSONA BLW PRÄZISIONSSCHMIEDE GMBH0.35carbon-manganese0.35alloy

Tel: +49 0203/732-390 Fax: +49 0203/732 267 email: [email protected] web www.sona-blw.comCertificate #: MD00/2210/0007/3 Expiry date: 08/05/2019

Friemersheimer Straße 40D-47249 Duisburg

Werk Duisburg

20.00carbon HamburgForgingsSSK VON SCHAEWEN HÜCKESWAGEN GmbH20.00alloy

Tel: +49 (0)201 81 10 477 Fax: +49 (0)201 81 10 41 email: [email protected] web: www.von-schaewen.deCertificate #: MD00/1284/0008/3 Expiry date: 13/03/2019

Stahlschmidtsbrücke 20D-42499 Hückeswagen

Schmiedewerk Hückeswagen

35.00carbon HamburgForgingsSSK VON SCHAEWEN WETTER GmbH35.00carbon-manganese35.00alloy

Tel: +49 201 8110 432 Fax: +49 201 8110 449Email: [email protected]: www.von-schaewen.deCertificate #: MD00/3540/0003/3 Expiry date: 13/11/2020

Ruhrstrasse 2158300 Wetter

5.00carbon HamburgForgingsSTAHLHAMMER BOMMERN GMBH5.00carbon-manganese5.00alloy5.00austenitic stainless

Tel: +49 (0)2381 91498-43 Fax: +49 (0)2381 91498-21

E-Mail: [email protected]

Website: www.stahlhammer.de

Certificate #: MD00/1422/0008/3 Expiry date: 19/01/2019

Member of COLUMBUS McKINNON CorporationCarl-Zeiss Strasse 7D-59077 Hamm

5.00carbon HamburgForgingsSchmidt + Clemens GmbH +Co. KG5.00carbon-manganese5.00alloy5.00austenitic stainless

As at 04 June 2018 30Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

Tel No: +49 (0) 22 66 92 426 Fax No: +49 (0) 22 66 92 84 26email: [email protected] web: www.schmidt-clemens.deCertificate No: MD00/1319/0002/3 Expiry date 09/10/2019

D-51789 LindlarKaiserau 2

0.03carbon HamburgForgingsSchmiedetechnik Plettenberg GmbH & Co.KG0.03carbon-manganese0.03alloy0.03austenitic stainless

Tel: +49 2391 816 766 Fax: +49 2391 816 703 E-mail: [email protected]

Website: www.stplettenberg.de

Certificate Number: MD00/1205/0008/3 Expiry: 19/03/2021

Daimlerstraße 9D-58840 Plettenberg

0.05carbon HamburgForgingsTHIELE GmbH & CO. KG0.05carbon-manganese

Tel: +49 (0)2371 947 377 Fax: +49 (0)2371 947 234 Mobile: +49 151 16709191 Email: mailto:[email protected] Web: http://www.thiele.deCertificate #: MD00/1513/0008/3 Expiry date: 02/07/2018

Werkstr. 3D-58640 Iserlohn

Iserlohn-Kalthof

15.00carbon HamburgForgingsTHYSSEN KRUPP ROTHE ERDE GmbH15.00carbon-manganese15.00alloy15.00austenitic stainless

Tel: +49 (0)231 186 2244 Fax: +49 (0)231 186 2548 Certificate No. MD00/0684/0007/3 Expiry: 03/05/2018

Tremoniastraße 5-11D-44137 Dortmund

0.25carbon HamburgForgingsThyssenKrupp Gerlach GmbH0.25carbon-manganese0.25alloy

Tel: +49 6841 107 421 Fax: +49 6841 107 88421 Email:[email protected] Web:http://www.thyssenkrupp.comThe scope of approval includes for crankshafts to the above maximum weight.Certificate Number: MD00/0597/0008/3 Expiry date: 14/10/2017

Postfach 1252D 66403 Homburg

Neue Industriestrasse

0.03carbon HamburgForgingsWARMPRESSWERK MAX B. SCHACHMANN GmbH0.03carbon-manganese0.03alloy

Tel: +49 (0)6596 790 Fax: +49 (0)6956 7979 email: [email protected] web: www.warmpresswerk.deCertificate #: MD00/1655/0007/3 Expiry date: 29/08/2019

Hauptstraße 29D-54570 Niederstadtfeld

0.10carbon HamburgForgingsWILHELM MAASS GmbH. MAASS GLOBAL GROUP0.10austenitic stainless

Tel: +49 (0)201 29493-338 Fax: +49 (0)201 291875 Email: [email protected]: www.wmaassglobal.comCertificate #: MD00/0966/0007/3 Expiry date: 03/04/2019

Zeche Ernestine 18D-45141 Essen

3.00carbon HamburgForgingsWildauer Schmiede - und Kurbelwellentechnik GmbH3.00carbon-manganese3.00alloy0.20austenitic stainless

Tel: +49 3375 586 305 Fax: +49 3375 586 310 Email: [email protected] http://www.wildauer-skt.deIncluding crankshafts with K factor > 1.0 for approved applicationsCertificate #: MD00/1329/0009/3 Expiry date: 15/11/2018

SchmiedestraßeD-15745 Wildau

As at 04 June 2018 31Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

Hungary

5.00carbon ViennaForgingsHÁMOR Zrt.5.00carbon-manganese5.00alloy

Tel: +36 46 401 520 Fax: +36 46 531 391 Email: mailto:[email protected] Web: http://www.hamorforge.comCertificate No. MD00/3285/0004/3 Expiry date: 25/11/2018

Kiss Ernö út17H-3531

Miskolc

India

8.00carbon ChennaiForgingsARCVAC FORGECAST LTD8.00carbon-manganese8.00alloy

Tel: + 91 33 2600 2176; Fax + 91 33 2659 8002Email: [email protected]: www.arcvacsteel.comCertificate No. MD00/3561/0004/3 Expiry date: 06/02/2018Approved for semi finished forged bars

P.O: PanchgharaHooghly.West Bengal - 712 306

NH 2, Durgapur Expressway

6.50carbon MumbaiForgingsBHARAT FORGE LIMITED6.50carbon-manganese6.50alloy

Approved for closed die crankshaft forgings up to 570 kg maximum weight and main journal diameter of maximum 125 mm with an enhanced k factor of 1.05.

Approved for the surface induction hardening of crankshafts.

Controlled cooling of carbon crankshafts in grade SAE 1548 up to a maximum 162 mm flange diameter in lieu of normalising and tempering accepted forapproved applications.

Tel: +91 20 26702525 Fax: +91 20 26870693 Email: [email protected] Certificate No. MD00/0185/0009/3 Expiry date: 04/10/2020Web: http://www.bharatforge.com

Pune 411 036Mundhwa

1.06carbon MumbaiForgingsBHARAT FORGE LIMITED1.06carbon-manganese1.06alloy

Tel no. 0091 211 2239967 Fax No 0091 2026822163

Email: [email protected]

Web www.bharatforge.com

Approved for closed die crankshaft forgings with an enhanced k factor of 1.05 with a maximum main journal diameter of 244 mm.Approved for normalised, quench & tempered, & surface hardened supply conditions

Cert No.MD00/3682/0003/3 Expiry date: 12/10/2018

E-1/1 MIDCBaramati - Maharastra

Baramati

1.00austenitic stainless MumbaiForgingsCHANDAN STEEL LIMITED

Admin Office: Tel: +91 22 66290600, Fax: +91 22 66290633/34 Email to: [email protected]: Tel: +91 260 3089999, Fax: +91 260 2562287/2560103 Email to: [email protected]: www.chandansteel.netCertificate No. MD00/4360/0002/3 Expiry date: 07/07/2020

Survey No. 102/2 Village DehriUmbergaon, ValsadGujarat - 396 171

Forging Division

3.00carbon MumbaiForgingsECHJAY INDUSTRIES PVT. LTD.3.00carbon-manganese3.00alloy3.00austenitic stainless

As at 04 June 2018 32Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

Tel: +91 281 2387482 Fax: +91 281 2387847email [email protected] web: www.echjayindustries.comApproval includes crankshafts with a K factor of 1.05Certificate No. MD00/3007/0005/3 Expiry date: 18/09/2018

Rajkot 360 003Gujarat

Lalpari Lake Road

4.10carbon MumbaiForgingsKUNJ FORGINGS (P) LTD4.10carbon-manganese4.10alloy2.00austenitic stainless

Tel No: +91-120-4292692, Fax: +91-120-4292699. E-mail: [email protected] No: MD00/4445/0002/3 Expiry 13/06/2020

C-177, B.S Road, Industrial AreaGhaziabad - 201001 (U.P)

Ghaziabad

0.14carbon ChennaiForgingsSHARDLOW INDIA LTD0.14carbon-manganese0.14alloy

Tel: 044-25375807 Fax: 00914425375284Email: [email protected] Website: www.shardlow.inCertificate Number: MD00/4602/0002/3 Expiry Date: 23/01/2021

SembianChennai 600 011

Huzur Gardens

4.00carbon MumbaiForgingsSUNIL FORGING & STEEL INDUSTRIES - UNIT 24.00alloy

Tel: +91 2232676007 Fax: +91 2227401641Email mailto: [email protected]: http://www.sunilforgings.comCertificate No. MD00/4654/0001/3 Expiry date: 21/01/2020

L-141 & L-142, M.I.D.C. Taloja, Tal. Panvel,Dist. Raigad, Navi Mumbai 410208,Maharashtra

8.00carbon ChennaiForgingsVIKRANT FORGE PVT. LIMITED8.00carbon-manganese8.00alloy

Phone: +91 33 2659 6006 Fax: +91 33 2659 3738 email [email protected] web www.vikrantforge.comCertificate No. MD00/3055/0005/3 Expiry date: 21/01/2019

PO: Dankuni - 711224West Bengal

Maity Para, NH-2, Delhi Road

1.20austenitic stainless MumbaiForgingsVIRAJ PROFILES LIMITED (FORGING DIVISION)

Tel: +91 90444 1039 Fax: +91 2525 260159

E-mail [email protected]

Website: www.viraj.com

Certificate Number: MD00/3214/0005/3 Expiry date: 06/12/2020

BOISAR,DIST-PALGHAR,MAHARASHTRA - 401506

G-2,23,75, MIDC & SURVEY No-140/1, SARAVALI,TARAPUR INDUSTRIAL AREA

Italy

0.13carbon GenoaForgings VARESINA STAMPI S.p.A0.13carbon-manganese0.13alloy

Tel: +39 011 9282240

E-mail: [email protected]

Website:www.varesina.com

Certificate No: MD00/4733/0001/3 Expiry Date: 28/06/2020

1-10070 Corio Canavse (TO)Regionionia Tenqua,

As at 04 June 2018 33Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

0.20carbon MilanForgingsA.C.S.A. STEEL FORGINGS S.P.A.0.20carbon-manganese0.20alloy

Tel: +39 331 712 011 Fax: +39 331 712055 email: [email protected] web: www.asca.itCertificate No. MD00/0071/0007/3 Expiry date: 24/08/2019

21040 Oggiona S.StefanoVarese

Via Per Solbiate Arno 43

5.50carbon VeniceForgingsACCIAIERIE VALBRUNA S.P.A.5.50carbon-manganese5.50alloy5.50austenitic stainless5.50duplex stainless5.50precipitation hardened

stainless*

Tel: +39 0444 968211 Fax: +39 0444 968182 Email:mailto:[email protected] Web:http://www.acciaierie-valbruna.comCertificate No. MD00/0041/0009/3 Expiry date: 01/06/2020

36100 VicenzaViale Della Scienza, 25 z.i.

10.00carbon VeniceForgingsASFO S.P.A.10.00carbon-manganese10.00alloy4.00austenitic stainless4.00duplex stainless4.00martensitic stainless*

Tel. +39 0445 805290 Fax. +39 0445 805299 email: [email protected] web: www.fomasgroup.comCertificate No. MD00/2823/0007/3 Expiry date: 15/09/2019

36010 Chiuppano (VI)via IV Novembre, 12

18.00carbon VeniceForgingsASFO S.P.A.18.00carbon-manganese18.00alloy

Tel: +39 (0) 445 805290 Fax: +39 (0) 445 805299email: [email protected] web: www.fomasgroup.comCertificate Number: MD00/4064/0003/3 Expiry: 16/09/2019

Via Stradone del Dieci45030 Villamarzana (RO)

28.00carbon MilanForgingsASO SIDERURGICA S.p.A. UNIPERSONALE28.00carbon-manganese28.00alloy31.00austenitic stainless

Tel No: +39 30 6841550 Fax No: +39 30 6841012

E-mail: [email protected]

Website: www.aso.it

Certificate No: MD00/3967/0005/3 Expiry date 29/11/2020

Via Verginello, n 29~3125045 CastegnatoBrescia

ASO Forge

0.03carbon MilanForgingsB.F.E. s.r.l0.03carbon-manganese0.03alloy0.03austenitic stainless0.03duplex stainless*

Tel. +39 035 584290 Fax. +39 035 583022email: [email protected] web: bfe.itCertificate No. MD00/4163/0002/3 Expiry date: 14/05/2019

Via G. Segantini,16-23842Bosisio Parini (LC)

0.16carbon MilanForgingsBERTOT S.p.A.0.16carbon-manganese0.16alloy0.16austenitic stainless0.16duplex stainless

Tel: +39 (0)11 9214935 Fax: +39 (0)11 9210618 email [email protected] web: www.bertot.comCertificate No. MD00/4188/0002/3 Expiry date: 24/06/2019

Via Robaronzino 41/4310073 CIRIE'(TO)

As at 04 June 2018 34Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

0.18carbon VeniceForgingsBIFRANGI S.p.A.0.18carbon-manganese0.18alloy

Tel: +39 (0)424 8381 Fax: +39 (0)424 838211 Email:[email protected] Web:http://www.bifrangi.itCertificate No. MD00/2946/0005/3 Expiry date: 23/01/2018

36065 MussolenteVicenza

Via Manzoni, 14

0.20carbon MilanForgingsCANAVERA & AUDI SpA0.20carbon-manganese0.20alloy

Tel: +39 (0)11 92 86 28, Fax: +39 (0)11 92 82 709,

Email: [email protected]

Website: www.canavera.com

Certificate Number:. MD00/3048/0006/3 Expiry: 01/02/2019

Regione Malone 610070 Corio (TO)

CORIO PLANT

0.20carbon MilanForgingsCANAVERA & AUDI SpA0.20carbon-manganese0.20alloy

Tel: +39 (0) 1244 8733 Fax: +389 (0) 1244 8784

E-mail: [email protected]

Website: www.canavera.com

Certificate Number: MD00/4147/0003/3 Expiry: 02/02/2019

Via Forno, 110080 Rivara (To)

RIVARA PLANT

10.00carbon VeniceForgingsCMF S.P.A.10.00carbon-manganese10.00alloy

Tel: +39 0481 630589 Fax: +39 0481 630511 email: [email protected] web : www.cmf-forgiati.itCertificate No. MD00/2290/0007/3 Expiry date: 01/09/2019

via G. Galilei, 2534071 Cormons (GO)

0.01carbon MilanForgingsCUGINI FRIGERIO S.R.L.0.01carbon-manganese0.01alloy

Tel: +39 (0)31 643 325 Fax: +39 (0)31 644 286 Email: mailto:[email protected] Web: http://www.cuginifrigerio.comCertificate Number: MD00/0357/0007/3 Expiry: 30/10/2018

Via S. Francesco d'Assisi, 322036 ERBA CO

9.00carbon TriesteForgingsF.A.C.S. FUCINE S.R.L.9.00carbon-manganese9.00alloy9.00austenitic stainless

Tel: +39 0432 656510 Fax: +39 0432 675784 Email: [email protected] No. MD00/0471/0008/3 Expiry date: 05/12/2019

Viale del Lavoro, 10033050 Pavia di Udine (Udine)

Forgiatura Acciai Speciali

36.00carbon VeniceForgingsF.O.C. CISCATO S.p.A.36.00carbon-manganese36.00alloy25.00austenitic stainless

Tel: +39 0445 739111 Fax: +39 0445 739222 Email: mailto:[email protected] Web: http://www.foc.itCertificate No. MD00/2032/0009/3 Expiry date: 03/12/2018

Via Pasin, 136010 Velo d'Astico fraz.Seghe(Vicenza)

0.10carbon MilanForgingsFEAT GROUP SpA Divisione FEAT INDUSTRIALE0.10carbon-manganese0.10alloy0.10austenitic stainless0.07duplex stainless*

As at 04 June 2018 35Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

Tel: +39 031 6591 Fax: +39 031 659219 Email: [email protected] Web: http://www.featgroup.comCertificate No. MD00/0485/0008/3 Expiry date: 26/09/2017

Via G. Parini 3023861 Cesana Brianza (LC)

25.00carbon MilanForgingsFOMAS S.p.A.25.00carbon-manganese25.00alloy25.00austenitic stainless37.50duplex stainless*

Tel: +39 (0) 39 99811 Fax: +39 (0) 39 58487 Email: [email protected] Web: http://www.fomas.itCertificate No. MD00/0475/0008/3 Expiry date: 07/01/2019

Via Martiri della Liberazione, 1723875 Osnago (LC)

25.00carbon GenoaForgingsFOMEC SpA25.00carbon-manganese

Tel No +39 0174 45394 fax No +39 0174 481009Email: [email protected] www.fomec.itCertificate No MD00/4012/0002/3 Expiry date 11/04/2018

Corso Inghilterra,40Zona Industriale,12084 Mondovi' (CN)

30.00carbon MilanForgingsFORGE MONCHIERI S.p.A.30.00carbon-manganese30.00alloy30.00austenitic stainless

Tel: +39 0364 236111 Fax: +39 0364 340902 Email: [email protected] Web: http://www.monchieri.itCertificate No. MD00/0522/0007/3 Expiry date: 24/12/2018

25040 Cividate CamunoBrescia

Via Industriale No. 3

0.50duplex stainless* MilanForgingsFORGE NICROMO S.p.A

Tel: +39 (0) 341 979831 Fax: +39 (0) 341 982228 Email: [email protected] Certificate Number. MD00/4271/0003/3 Expiry date:22/12/2019

Via Provinciale 5723813 Bindo di Cortenova (LC)

42.00carbon VeniceForgingsFORGES S.P.A.42.00carbon-manganese42.00alloy

Tel: + 39 (0)432 701433 Fax: +39 (0)432 734299email: [email protected] web http://www.forgesitaly.itCertificate No. MD00/2717/0006/3 Expiry date: 18/07/2018

Via dell' Artigianato 5733043 Cividale del Friuli (UD)

30.00carbon-manganese BresciaForgingsFORGIA DI BOLLATE S.P.A.30.00alloy12.40austenitic stainless12.40duplex stainless*

Tel.:+390376714511 Fax.:+390376723846Email: [email protected]//: www.forgiadibollate.comCertificate no.: MD00/4226/0002/3, Expiry date: 15/09/2019

Strada Provinciale 4, No 946013 Canneto Sull'Oglio (Mn)

Canneto Sull'Oglio (Mn)

0.67alloy RavennaForgingsFORGIA RAPIDA S.r.l

Tel No +39 51 328484 Fax No +39 51 328312email: [email protected] web: www.forgiarapida.com

Certificate No. MD00/4077/0002/3 Expiry Date 09/09/2018

Via Brini,nr 3240128 Bologna

9.00carbon MilanForgingsFORGIA REZZATESE SRL UNIPERSONALE9.00carbon-manganese9.00alloy9.00martensitic stainless*

As at 04 June 2018 36Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

Tel No +30 9964722 Fax No +30 9964762email: [email protected] web: www.forgiaressatese.itCertificate No. MD00/4562/0001/3 Expiry Date 30/03/2019

Via Gavardina 2025011 CalcinatoBrescia

60.00carbon MilanForgingsFORGIATURA A. VIENNA S.r.l.60.00alloy60.00austenitic stainless60.00duplex stainless

Tel: +39 2 9393 0011 email: [email protected] web: www.forgevienna.it

Certificate No. MD00/0535/0007/3 Expiry date: 09/02/2020

Via Ospiate 46/4820017 RHO Milan

8.00carbon MilanForgingsFORGIATURA MARCORA S.r.l.8.00carbon-manganese8.00alloy8.00austenitic stainless

Tel: +39 331 375540email: [email protected] web: www.forgiaturamarcora.it

Certificate No. MD00/0536/0008/3 Expiry date: 31/05/2020

Via Gramsci, 3621057 Olgiate Olona (VA)

Olgiate Olona

60.00carbon MilanForgingsFORGIATURA MODERNA ARESE S.p.A.50.00carbon-manganese50.00alloy

Tel: +39 02 93 45 1938email: [email protected] web: www.fmaspa.itCertificate No. MD00/0533/0007/3 Expiry date: 28/11/2019

Via delle Industrie, 1720020 Arese (MI)

85.00carbon MilanForgingsFORGIATURA MORANDINI S.R.L85.00carbon-manganese53.00alloy15.00austenitic stainless

Tel: +39 0364 347132 Fax: +39 0364 347156

E-Mail: [email protected] Web: http://www.morandini.it

Certificate No. MD00/0534/0010/3 Expiry date: 14/05/2020

25040 CividateCamuno - Brescia (BS)

Via dell'Industria, 5

0.84carbon VeniceForgingsFORGIATURA SAN GIORGIO S.p.A.0.84carbon-manganese0.84alloy

Tel No: 0039 0331 413311 Fax No: 0039 0331413333email: [email protected] web www.forgiaturasg.it Certificate No: MD00/3707/0003/3 Expiry date: 20/11/2018

20010 Canegrate,Milan

Via Alessandria 9/11

25.00carbon VeniceForgingsFORGITAL ITALY S.p.A.25.00carbon-manganese25.00alloy25.00austenitic stainless

Tel: +39 (0) 445 731313 Fax: +39 (0) 445 731490 Email: mailto:[email protected] Web page http://www.forgital.comCertificate Number: MD00/0538/0007/3 Expiry: 16/02/2018

Via G. Spezzapria, 136010 Velo d'Astico loc. Seghe (Vicenza)Vicenza

80.00carbon MilanForgingsFRANCHINI ACCIAI S.p.A.80.00carbon-manganese50.00alloy

Tel: +39 30 9750211 Fax: +39 30 9975231 Email: mailto:[email protected] Web: http://www.franchiniacciai.comCertificate No. MD00/0548/0010/3 Expiry date: 21/11/2020

25030 MairanoBrescia

Via IV Novembre 9/17

As at 04 June 2018 37Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

10.00carbon TriesteForgingsFRIULFORGIA S.R.L10.00carbon-manganese10.00alloy

Tel: +39 0346 6109111 Fax: +39 0432 918630

E-mail: [email protected]

Website: www.friuforgia.it

Certificate No. MD00/3893/0003/3 Expiry date: 14/03/2020

Localita Pannellia No. 5533039 Sedegliano (Udine)

35.38alloy MilanForgingsGASPARINI s.r.l.

Tel No: +39 1316 17430Email: [email protected]: www.gasparinisrl.euCertificate no: MD00/4316/0002/3 Expiry date 12/05/2020

Via Rana snc - Zona D615122 Spinetta Marengo - Alessandria

0.08alloy TriesteForgingsHOT ROLL S.r.l.

Tel: +39 0124 477511 Fax: +39 0124 477505 Email: [email protected] Web: http://www.fomasgroup.comCertificate No. MD00/4133/0002/3 Expiry date: 23/03/2019

Via Rolando Perino No. 49Busano 10080 (To)

FOMAS GROUPSmall Rings Products

5.00carbon MilanForgingsIRE-OMBA S.p.A.5.00carbon-manganese5.00alloy5.00austenitic stainless

Tel: +39 35 4160811 email: [email protected] www.ire-omba.itCertificate No. MD00/2340/0006/3 Expiry date: 28/05/2017

Via Serassi, 1424125 Bergamo

0.05carbon MilanForgingsISEF Srl0.05carbon-manganese0.05alloy0.05austenitic stainless0.05duplex stainless

Tel: +39 0331 994033 Fax: +39 0331 991761 Email mailto:[email protected] Web http://www.isefsteelforgings.comCertificate No. MD00/2172/0007/3 Expiry date: 27/12/2018

Via Matteotti 70/7621040 CarnagoVarese

30.00carbon MilanForgingsLUCCHINI MAMÈ FORGE S.p.A.30.00carbon-manganese30.00alloy15.00austenitic stainless

Tel: +39 (0) 364 347755 Fax: +39 (0) 364 347791 E-mail: [email protected]

Website: www.lucchinimame.com

Certificate No. MD00/0532/0009/3 Expiry date: 20/09/2020

Via Delle Cave, 125040 Cividate Camuno (Brescia)

40.00carbon MilanForgingsLUCCHINI RS S.p.A.40.00carbon-manganese40.00alloy40.00austenitic stainless

Tel: +39 035 963520 Fax: +39 035 963488 Email: mailto: [email protected] Web: http://www.lucchiniRS.itIncluding steelmaking by the EAF and ingot route.Certificate No. MD00/0949/0007/3 Expiry: 18/03/2018

Via G. Paglia N.4524065 LovereBergamo

As at 04 June 2018 38Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

0.10carbon TriesteForgingsMEGA S.P.A.0.10carbon-manganese0.10alloy0.10austenitic stainless0.10duplex stainless*

el: +39 035 661280 Fax: +39 035 665535 Email: [email protected] Web: http://www.mega-fittings.comCertificate No. MD00/4121/0003/3 Expiry date: 28/06/2019

Via Dalla Chiesa 324020 Scanzorosciate

30.00carbon MilanForgingsMETALCAM S.P.A30.00carbon-manganese30.00alloy30.00austenitic stainless

Tel: +39 0364 238261 Fax: +39 0364 238216 Email: mailto:[email protected] No. MD00/2111/0007/3 Expiry date: 02/01/2020

Via Leonardo da Vinci 325043 Breno (BS)

Breno Works

0.07carbon MilanForgingsMETALFAR PRODOTTI INDUSTRIALI S.p.A0.07carbon-manganese0.07alloy0.07austenitic stainless

Tel: +39 3351451866 E-mail: [email protected]

Website: www.metalfar.com

Certificate No. MD00/2937/0006/3 Expiry date: 04/06/2020

23861 Cesana Brianza (Lecco)Via G. Parini, 28

47.00carbon MilanForgingsOFAR S.p.A.47.00carbon-manganese47.00alloy

Tel: +39 30 952 2511 Fax: +39 30 992 9952 Email: mailto:[email protected] Certificate Number: MD00/1128/0007/3 Expiry: 23/04/2016

25010 VisanoBrescia

Via dell'Industria. 5

0.05carbon MilanForgingsOFFICINA MECCANICA FRATELLI RISETTI S.r.l0.05carbon-manganese0.05austenitic stainless

Tel No: +39 331 993440 +39 331993356Email: risettim'libero.itCertificate No: MD00/4280/0002/3 Expiry date: 14/01/2020

Via Trieste,421048, Solbiate Arno (VA)

1.20carbon MilanForgingsOFFICINE AMBROGIO MELESI & CO.1.20carbon-manganese1.20alloy1.20austenitic stainless1.20duplex stainless*

Tel: +39 0341 901521 Fax: +39 0341 983497 Email:mailto:[email protected] No. MD00/1134/0009/3 Expiry date: 29/06/2019

Largo de' Vecchi, 1123813 Cortenova (LC)

0.32carbon MilanForgingsOFFICINE BINDA & GALPERTI S.r.l.0.32carbon-manganese0.32austenitic stainless0.32duplex stainless*

Tel no:+ 39 341 901333 Fax No: +39 341 901300Email [email protected] www.officinebindaegalperti.comCertificate No MD00/4225/0004/3 Expiry date 04/09/2019

Via Roma 43

1.00carbon MilanForgingsRIGANTI S.p.A.1.00carbon-manganese1.00alloy1.00austenitic stainless

As at 04 June 2018 39Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

Tel: +39 331 988600 Fax: +39 331 988699 Email: mailto:[email protected] Web: http://www.riganti.comScope of approval includes for solid forged crankshafts in alloy grade to a maximum weight of 140kgs.Heat treatment is subcontractedCertificate No. MD00/0771/0010/3 Expiry date: 28/08/2020

21048 SOLBIATE ARNO (VA)Via Vittorio Veneto 1

25.00carbon MilanForgingsRINGMILL S.p.A.25.00carbon-manganese25.00alloy25.00austenitic stainless25.00martensitic stainless*

Tel: +39 (0)342 688111 fax: +39 (0)342 687746 Email: mailto:[email protected]* accepted for approved applicationsCertificate No. MD00/2162/0007/3 Expiry date: 12/10/2018

Via Adda. 2323015 Nuova Olonio (Sondrio)

1.70carbon VeniceForgingsRTD SRL1.70carbon-manganese0.70austenitic stainless

+39 0445 741420 Fax: +39 0445 712368email: [email protected] web: www.rtdforge.comCertificate No: MD00/4582/0001/3 Expirt Date: 22/05/2019

via Dei Roveri 34,36011 Arsiero (VI)

6.00carbon TriesteForgingsSESIA FUCINE S.r.l.6.00carbon-manganese6.00alloy

Tel: +39 011 2424165 Fax: +39 011 2465746Email: [email protected]: www.sesiafucine.comCertificate No. MD00/3744/0004/3 Expiry date: 16/02/2019

Strada Basse di Stura 6110154 Torino

10.00carbon VeniceForgingsSIDERFORGEROSSI GROUP S.P.A.10.00carbon-manganese10.00alloy1.50austenitic stainless

Tel: +39 0445 714400 Fax: +39 0445 714444Email mailto:[email protected] Web: http://www.forgerossi.comCertificate Number. MD00/3154/0006/3 Expiry date: 09/04/2020

Via Cartiera di Mezzo, 3836011 Arsiero (VI)

Works of Arsiero

4.00carbon VeniceForgingsSIDERFORGEROSSI GROUP SPA4.00carbon-manganese4.00alloy

Tel: +39 0445 802222 Fax: +39 0445 802202 E-mail; mailto:[email protected] Web: http://www.siderforge.itCertificate No. MD00/2159/0008/3 Expiry date: 09/11/2018

Via M. Schiro, 236010 Cogollo del CengioVicenza

Cogollo del Cengio

0.50carbon MilanForgingsSIDERFORGEROSSI GROUP SPA0.50carbon-manganese0.50alloy

Tel: +39 0124 477333 Fax: +39 0124 477303 Email mailto: [email protected] Web http;//www.siderforgerossi.comCertificate No. MD00/3551/0005/3 Expiry date: 08/05/2020

Via Rolando Perino, 3710080 Busano Canavese

Busano Canavese

25.00carbon MilanForgingsSPECIAL FLANGES S.P.A25.00carbon-manganese25.00alloy25.00austenitic stainless

Tel: +39 0362.552247 Fax: +39 0362.501653email: [email protected] web: www.special-flanges.it

Certificate No.: MD00/4335/0002/3 Expiry Date: 09/06/2020

Via Liguria 115,20025 Legnano (MI),Milan,

As at 04 June 2018 40Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

0.02carbon MilanForgingsSTAMPERIA CASOLI Srl.0.02carbon-manganese0.02alloy0.02austenitic stainless

Tel: +39 0331 994 254 Fax: +39 0331 991 611 Email:[email protected] :www.stamperiacasoli.itCertificate Number: MD00//2718/0006/3 Expiry: 02/07/2018

Via Colzani 4021048 Solbiate Arno VA

0.01carbon MilanForgingsSTAMPERIA DI MENZAGO S.R.L.0.01carbon-manganese0.01alloy

Tel No: +39 331909196 Fax No: + 39 331 908511Email [email protected]: www.stamperiadimenzago.itCertificate No: MD00/4251/0002/3 Expiry date 22/10/2019

Via Della Concordia, 3921040 Menzago di Sumirago(VA)

0.02carbon MilanForgingsSTAMPERIA ITALFORGE DI SIRONE Srl.0.02carbon-manganese0.02alloy0.02austenitic stainless0.02duplex stainless

Tel: +39 031 850016 Fax: +39 031 852572email: [email protected] web: www.stamperiaitalforge.it

Certificate No: MD00/4532/0001/3 Expiry date: 06/12/2018

Via dell'Industria, 823844 Sirone (LC)

4.00alloy MilanForgingsTENARIS DALMINE

Tel: +39 (0)35 5602098 Mob: +39 3290504376email: [email protected] web: www.tenaris.comApproved for quench and tempered seamless pressure vessels by pipe spinning process to AD-2000 Merkblatt W0Maximum approved dimensions = 711mm o/d x 40mm w/tCertificate No. MD00/4363/0002/3 Expiry date: 19/07/2020

24044 Dalmine (Bergamo)Piazza Caduti 6 Luglio 1944

6.00carbon MilanForgingsVALFORGE s.r.l.6.00carbon-manganese6.00alloy6.00austenitic stainless

Tel: +39 341 90 15 79 Fax: +39 391 983864 Email: [email protected] Website: http://www.valforge.it

Certificate No. MD00/4196/0002/3 Expiry date: 03/07/2019

Via Provinciale 41/43Cortenova (LC)

0.05carbon GenoaForgingsVARESINA STAMPI S.p.A0.05carbon-manganese0.05alloy

Tel: +39 0331 909010 Fax: +39 0331 908681Email: [email protected]

Website: www.pozzi-group.it/it/home

Certificate No: MD00/4518/0001/3 Expiry Date: 18/10/2018

13-21040 Quinzano di Sumirago(VA)

Via G. Pozzi

Japan

4.00carbon KobeForgingsAICHI STEEL CORPORATION4.00carbon-manganese4.00austenitic stainless

Tel: +81 52 603 9353 Fax: +81 52 603 9898 Email: mailto:[email protected] www.aichi-steel.co.jpCertificate No. MD00/0076/0007/3 Expiry date: 23/09/2018

Arao-machiTokai-shiAichi-ken, 476-8666

Chita Plant1, Wano-Wari

As at 04 June 2018 41Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

3.00carbon YokohamaForgingsANTEX CORPORATION3.00carbon-manganese3.00alloy3.00austenitic stainless

Tel: +81 (0)293 23 7511 Fax: +81 (0)293 23 7515 E-mail: mailto: [email protected] Web:http://www.antex.co.jpCertificate No. MD00/0110/0009/3 Expiry date: 06/07/2020

3333-24 Kami-TezunaTakahagi CityIbaraki 318-0004

Takahagi Plant

1.00carbon YokohamaForgingsCHIKARA KOGYO Co., Ltd.1.00carbon-manganese1.00alloy1.00austenitic stainless

Tel: +81 471 24 7725 Fax: +81 471 24 6671

E-mail: [email protected]

Website: www.chikra-kogyo.co.jp

Certificate No. MD00/0301/0008/3 Expiry date: 09/09/2019

233-4 Nishi-SangaoNoda-shiChiba. 278-0015

30.00carbon YokohamaForgingsDAIDO STEEL CO., LTD.30.00carbon-manganese30.00alloy16.00austenitic stainless

Tel: +81 (0)279 25 2009 Fax: +81 (0)279 25 2043 Email: mailto:[email protected] No. MD00/0375/0008/3 Expiry date: 25/11/2018

Shibukawa-shiGunma 377-0007

Shibukawa Plant500, Ishihara

20.00carbon KobeForgingsDAIMARU STEEL FORGING CO., LTD.20.00carbon-manganese20.00alloy20.00austenitic stainless

Tel: +81 6 581 2851 Fax: +81 6 581 2855 email: [email protected] web: www.daimaru-kozai.co.jpCertificate No. MD00/0380/0007/3 Expiry date: 16/10/2018

28-7 Kujo 1-chomeNishi-kuOsaka

5.00carbon YokohamaForgingsDOWA FORGING CO., LTD.5.00carbon-manganese5.00alloy

Tel: +81 (0)3 3790 2003 Fax: +81 (0)3 3790 2877 email: [email protected] web www.dowa-forging.co.jp

Certificate No. MD00/2875/0006/3 Expiry date: 11/04/2020

Ohta-ku,Tokyo143-0003

2-6-19, Keihinjima

3.25carbon KobeForgingsHAKURO FORGING CO., LTD.3.25carbon-manganese3.25alloy

Tel: +81 794 95 1238 Fax: +81 794 95 1325 email: mailto: [email protected]: www.hakuro-net.co.jpCertificate No. MD00/3162/0005/3 Expiry date: 24/05/2020

Inami-choKako-gunHyogo Pref.

444-22 Shimokusadani

10.00carbon YokohamaForgingsHATAKEYAMA IRON WORKS Co., Ltd.10.00carbon-manganese10.00alloy

As at 04 June 2018 42Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

Tel: +81 (0)3 3790 0211 Fax: +81 (0)3 3790 0210 Email: [email protected] site www.hatakeyama.ne.jpCertificate No. MD00/0658/0008/3 Expiry date: 21/01/2021

Ohta-kuTokyo143-0003

2-11-1, Keihinjima

12.00alloy KobeForgingsHITACHI METALS, LTD.12.00austenitic stainless

Tel: +81 (0) 854 22 1908 Fax: +81 (0) 854 23 0281 Email mailto:[email protected] Web http://www.hitachi-metals.co.jpCertificate No. MD00/0678/0007/3 Expiry date: 19/12/2018

Yasugi-shiShimane-ken

Yasugi Works2107-2, Yasugi-cho

9.60carbon NagasakiForgingsHOWSER CO. LTD.,9.60carbon-manganese9.60alloy

Tel: +81 949 22 1385 Fax: +81 949 22 1386 email: [email protected] web: www.howser.co.jp

Certificate No. MD00/1365/0006/3 Expiry date: 15/01/2017

6-50 Mizubori 2 - chomeNogata CityFukuoka Pref.

250.00carbon NagasakiForgingsJAPAN CASTING & FORGING CORPORATION250.00carbon-manganese250.00alloy250.00austenitic stainless

Including steelmakingTel: +81 93 884 0044 Fax: +81 93 873 1057 Email: mailto:[email protected] Web: http://www.jcfc.jpCertificate No. MD00/0790/0009/3 Expiry date: 27/04/2019

Materials Quality Scheme Approved - Approval No. MQS026

Tobata-KuKitakyushu City804-8555

46-59, Sakinohama Nakabaru

25.00carbon KobeForgingsKANSAI TEKKO CO., LTD.25.00carbon-manganese25.00alloy

Tel: +81 6 6487 0133 Fax: +81 6 6487 0137 email: [email protected] web: www.kansaitekko.co.jp

Certificate No. MD00/0824/0008/3 Expiry date: 24/10/2020

56 Kitahatsushima-choAmagasaki-cityHyogo-ken

400.00carbon KobeForgingsKOBE STEEL, LTD.400.00carbon-manganese400.00alloy400.00austenitic stainless

Tel: +81 794 45 7178 Fax: +81 794 45 7235

Email: [email protected]

Web http://www.kobelco.co.jp

Including steelmaking

40CrMo8 high strength low alloy steel with tensile strength above 950MPa accepted for approved applications

Solid built crankshafts with a K factor > 1.0 for approved applications.Die Forged Semi built up crank throws up to 90T types S42MC-C and S50MC-C

MQS Approved - Approval No. MQS 053

Certificate No. MD00/0867/0010/3 Expiry date: 27/10/2018

Arai-choTakasago-shi

Steel Casting and Forging Plant3-1, 2 Chome Shinhama

As at 04 June 2018 43Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

0.06carbon NagasakiForgingsMETALFORGE CORPORATION0.06carbon-manganese0.06alloy

Tel: +81 982 63 7001 Fax: +81 982 63 7005email: [email protected] web: www.metalforge.co.jp/Certificate No. MD00/3871/0005/3 Expiry date: 02/01/2020

10787-2, Ozue, Oaza KadokawaKadokawa-cho, Higashi Usuki-gunMiyazaki-Pref. 889-0611

3.00carbon KobeForgingsMIKI FORGING CO., LTD.3.00carbon-manganese3.00alloy

Tel: +81 6 6472 2931 Fax: +81 6 6475 3116 email: [email protected] Web: www.mikitankou.co.jpCertificate No. MD00/1019/0007/3 Expiry date: 23/07/2019

TakeshimaNishiyodogawa-kuOsaka City

8-29, 5-chome

5.30carbon KobeForgingsMITSUI MEEHANITE METAL CO., LTD.5.30alloy

Tel +81 (0)863 23 2685 Fax +81 (0)863 23 2698 Email: mailto:[email protected] No. MD00/1309/0007/3 Expiry date: 05/11/2018

Tamano CityOkayama Pref.706-8651

TAMANO STEEL CASTING DIVISION3-1-1, Tama

5.00carbon KobeForgingsMIYAZAKI IRON WORKS CO., LTD.5.00alloy

Tel: +81 6 6474 5331 Fax: +81 6 6472 2789Email: mailto: [email protected] No. MD00/1039/0007/3 Expiry date: 02/07/2019

MitejimaNishiyodogawa-kuOsaka

8-6, 3 Chome

5.00carbon NagasakiForgingsNAITO TANZOSHO CO., LTD.5.00carbon-manganese5.00alloy5.00austenitic stainless

Tel: +81 (0)949 22 5311 Fax: +81 (0)949 28 1565 Email mailto:[email protected] No. MD00/1059/0007/3 Expiry date: 08/12/2019

268 Akaji, Oaza, Kotake-machiKurate-gunFukuoka Pref. 820-1102

1.50carbon YokohamaForgingsNAKAJIMA SANGYO CO., LTD.1.50carbon-manganese1.50austenitic stainless

Tel: +81 (0)3 3790 0511 Fax: +81 (0)3 3790 0510 Email; mailto:[email protected] Web: http://www.nax.co.jpCertificate No. MD00/1060/0008/3 Expiry date: 03/07/2017

Ohta-kuTokyo143-0003

2-6-9, Keihinjima

12.50carbon YokohamaForgingsNIPPON KOSHUHA STEEL Co., Ltd.12.50carbon-manganese12.50alloy12.50austenitic stainless

Including steelmakingTel: +81 766 84 3182 Fax: +81 766 84 3190 Web: http://www.koshuha.co.jpCertificate No. MD00/1086/0007/3 Expiry date: 17/04/2018

Hachiman-machiImizuToyama

Toyama Works10-15, 3-chome

7.50carbon KobeForgingsNIPPON STEEL & SUMITOMO METAL CORPORATION7.50carbon-manganese7.50alloy7.50austenitic stainless

As at 04 June 2018 44Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

Tel: +81 (0)6 6411 7616 Fax: +81 (0)6 6411 7612 Email: mailto:[email protected] No. MD00/1458/0009/3 Expiry date: 12/11/2019

1, Nishino-choHigashi-MukojimaAmagasaki, 660-0856

Pipe & Tube UnitAmagasaki Works

40.00carbon KobeForgingsNIPPON STEEL & SUMITOMO METAL CORPORATION40.00carbon-manganese40.00alloy

Tel: +81 66466 6119 Fax: +81 66466 6217email: [email protected]

Certificate No. MD00/1778/0010/3 Expiry date: 18/07/2020

Including steelmaking and crankshafts with K1 factor = 1.05 for approved applications

Konohana-kuOsaka441-8510

Osaka Steel Works5-1-109, Shimaya

25.00carbon KobeForgingsOHMI PRESS WORKS & FORGING CO., LTD.25.00carbon-manganese25.00alloy

Tel: +81 0748 83 1511 Fax: +81 0748 83 1312 web: www.omitanko.co.jpCertificate No. MD00/1138/0007/3 Expiry date: 16/11/2018

138 KinoseShigaraki-cho, Koka-shiShiga 529-1802

Shigaraki Plant

25.00carbon KobeForgingsOKAMOTO IRON WORKS CO.25.00carbon-manganese25.00alloy25.00austenitic stainless

Tel: +81 (0)78 681 0271 Fax: +81 (0)78 681 7344 email: [email protected] Number: MD00/1142/0008/3 Expiry: 04/05/2019

2-3 2-chome HigashidemachiHyogo-kuKobe

3.50carbon NagasakiForgingsONOHARA IRON WORKS CO., LTD.3.50carbon-manganese3.50alloy3.50austenitic stainless

Tel: +81 949 24 0392 Fax: +81 949 24 0382 email:[email protected] web: onohara-iw.co.jpCertificate No. MD00/1149/0007/3 Expiry date: 05/11/2019

155 AkaziNogata CityFukuoka Pref. 822-0012

38.00carbon YokohamaForgingsPACIFIC STEEL MFG. CO., LTD.38.00carbon-manganese38.00alloy38.00austenitic stainless

Tel: +81 (0)76 432 4096 Fax: +81 (0)76 441 8226 Email: [email protected]: www.pacificsteelmfg.co.jpIncluding steelmakingCertificate No. MD00/1189/0008/3 Expiry date: 08/10/2018

1-93, Shimoshin NissomachiToyama-cityToyama Pref

0.09carbon YokohamaForgingsRIKEN FORGE CO., LTD.0.09carbon-manganese0.09alloy

Tel: +81 272 51 1834 Fax: +81 272 51 0018 E-mail: [email protected]

Certificate No. MD00/1243/0008/3 Expiry date: 05/01/2021

Maebashi-shiGunma371-0846

Maebashi Plant395-3, Motosohja-machi

As at 04 June 2018 45Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

6.00carbon KobeForgingsSANYO SPECIAL STEEL CO., LTD.,6.00carbon-manganese6.00alloy

Tel: +81 (0)792 35 6029 Fax: +81 (0)792 35 6027 email: [email protected] web: www.sanyo-steel.co.jp

Approval includes steelmaking.

Heat treatment sub contracted to Toyo Metal Treating Corporation, Takasago Plant No. 2, Takasago, Hyogo Pref., Japan.

Certificate No. MD00/1307/0009/3 Expiry date: 30/10/2019

Shikama-kuHimeji-shi672-8677

3007 Nakashima

45.00carbon NagasakiForgingsSASEBO HEAVY INDUSTRIES CO., LTD.45.00carbon-manganese17.30alloy

Tel: +81 956 25 9188 Fax: +81 956 25 9189

Including crankshafts with K factor > 1.0

Certificate No. MD00/1310/0010/3 Expiry date: 09/12/2020

1, Tategami-choSasebo CityNagasaki Pref. 857-8501

1.00carbon KobeForgingsSEO KOATSU KOGYO CO., LTD.1.00carbon-manganese1.00alloy1.00austenitic stainless

Tel: +81 790 28 0590 Fax: +81 790 28 1140Certificate No. MD00/1338/0008/3 Expiry date: 10/11/2019

869-20 Aza Kanzaki Ichikawa-choKanzaki-gunHyogo-pref

Ichikawa Works

20.00carbon YokohamaForgingsSHIMIZU STEEL CO., LTD.20.00carbon-manganese20.00alloy

Tel: +81 (0)286 67 5511 Fax: +81(0) 286 67 3219 Email: [email protected] No. MD00/1357/0007/3 Expiry date: 17/10/2018

Utsunomiya-shiTochigi-ken321-3231

Utsunomiya Plant,8-4, Kiyohara Industrial Park

1.80carbon YokohamaForgingsSHINAGAWA FORGING CO., LTD.1.80carbon-manganese1.80alloy

Tel: +81 295 53 6001 Fax: +81 295 53 6100 email: [email protected] No. MD00/1362/0007/3 Expiry date: 24/01/2019

Hitachiomiya-shiIbaraki Pref.319-2134

Mito Factory654, Kogyodanchi

0.12carbon YokohamaForgingsSNT Corporation0.12carbon-manganese

Tel: +81 (0)293 23 5321 Fax: +81 (0)293 23 5323 email: [email protected] No. MD00/1279/0007/3 Expiry date: 05/05/2019

Takahagi-shiIbaraki-ken318-0004

3333-3, Kamitezuna

0.12carbon YokohamaForgingsSUMIJU PRECISION FORGING CO., LTD.0.12carbon-manganese0.12alloy0.12austenitic stainless

As at 04 June 2018 46Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

Tel: +81(0)46 869 1790 Fax: +81 (0)46 869 1815 Email mailto:[email protected]: http://www.spf.shi.co.jpCertificate No. MD00/1451/0008/3 Expiry date: 20/01/2020

Yokosuka-shiKanagawa237-8555

19 Natsushima-cho

15.00carbon YokohamaForgingsSUNNAN IRON WORKS CO., LTD15.00carbon-manganese15.00alloy

Tel: +81 54 628 6351 Fax: +81 54 629 6570email: [email protected] Certificate No. MD00/4085/0003/3 Expiry Date: 25/09/2018

Yaizu-shiShizuoka-ken425-0021

4-2-20, Nakaminato

0.60alloy YokohamaForgingsTECHNO-METAL CO., LTD

Scope of approval covers for continuous grain flow crankshafts to 600kgs

Tel: +81 243 23 8152 Fax: +81 243 23 8711 email: [email protected] web: www.t-metal.jp

Certifcate No: MD00/3794/0003/3 Expiry date: 21/11/2018

Takada 100, Nihonmatsu,Fukushima Pref., 964-8585,

Nihonmatsu Plant

10.00carbon-manganese KobeForgingsTHE ENDO CO., LTD.10.00alloy

Tel: +81 852 76 3561 Fax: +81 852 76 3507email: [email protected]

Including crankshafts with K1 factor = 1.05 for approved applications.

Certificate No. MD00/1502/0007/3 Expiry date: 15/12/2019

Yatsuka-choMatsue cityShimane-pref. 690-1401

Shimane Plant1128-4 Eshima

350.00carbon YokohamaForgingsTHE JAPAN STEEL WORKS, LTD.350.00carbon-manganese350.00alloy350.00austenitic stainless

Tel +81 (0)143 22 0451 Fax +81 (0)143 22 5736 Email: https://www.jsw.co.jp/en/contact/Including continuous grain flow crankshafts with K factor 1.05 for approved applications.Certificate No. MD00/1507/0007/3 Expiry date: 10/11/2015

MuroranHokkaido051-8505

Muroran Plant4, Chatsu-machi

2.00carbon KobeForgingsYAMASHITA TANZOSHO CO., LTD.2.00carbon-manganese2.00alloy2.00austenitic stainless

Tel: (0)72 891 1421 Fax (0)72 892 2126Certificate No. MD00/3249/0004/3 Expiry date: 21/07/2018

6 Chome KatanoOsaka pref.

43-1 Ikuno

1.00carbon KobeForgingsYAMAZAKI MACHINERY MFG. CO., LTD.1.00carbon-manganese1.00alloy1.00austenitic stainless

Tel +81 748 75 1187 Fax: +81 748 75 1549

E-mail: [email protected]

Web site: www.buhin.co.jp

Certificate No. MD00/1688/0010/3 Expiry date: 05/05/2020

Shiga Pref.

3-2 HieKonan City

As at 04 June 2018 47Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

Korea

2.00carbon Busan PortForgingsCALTEK CO., LTD.2.00carbon-manganese2.00alloy

Tel: +82 55 346 1458 Fax: +82 55 346 1422Email: [email protected] No. MD00/4404/0003/3 Expiry date: 03/11/2020

Gimhae-siGyeongsangnam-do

1077, Gimhae-daeroHallim-myeon

12.00carbon Busan PortForgingsDA SAN MATERIAL CO., LTD.12.00carbon-manganese12.00alloy

Tel. +82 (0)55 342 3656 Fax +82 (0)55 342 3682 email:[email protected] web: www.dasan.infoCertificate No. MD00/2751/0009/3 Expiry date: 26/11/2018

Hallim-myeon,Gimhae-si,Gyeongsangnam-do

62 Angok-ro 333beon-gil

0.55alloy Busan PortForgingsDAE CHANG FORGING CO., LTD.

Tel: +82 55 310 6825 Fax: +82 55 329 3911 email: [email protected] web: www.dcf.co.ukApproval is restricted to Connecting Rod forgings and Connecting Rod type forgings to the above maximum weight but includes for continuous grain flowCrankshafts to a maximum weight of 170kgs.Certifcate Number: MD00/3742/0004/3 Expiry: 16/02/2019

115-92 Bongnim-ro,Saengnim-myeon, Gimhae-si,Gyeongsangnam-do,

5.00carbon Busan PortForgingsDAE HEUNG IND. CO. LTD.5.00carbon-manganese5.00alloy2.00austenitic stainless

Tel: +82 55 310 6770 Fax: +82 55 3106720 Email: [email protected]: http://daeheungind.krCertificate No. MD00/4249/0003/3 Expiry date: 04/11/2019

Approved for copper alloy forgings with the maximum weight of 250kg

135, Gimhae-daero974beon-gilHallim-myeon, Gimhae-siGyeongsangnam-do

HALLIM FACTORY

20.00carbon UlsanForgingsDONGYANG ENERGY & COMPONENTS CO. LTD.20.00carbon-manganese20.00alloy24.08austenitic stainless

Tel No. +82 542 80 3371 Fax No +82 54 275 7140email: [email protected] web www.dongyangenc.comCertificate Number MD00/3724/0003/3 Expiry date: 20/12/2018

#581-2,Oakmyeong-ri,Daesong-myeon, Nam-gu,Pohang City,Gyeongbuk

Pohang Plant

300.00carbon ChangwonForgingsDOOSAN HEAVY INDUSTRIES & CONSTRUCTION CO., LTD.300.00carbon-manganese300.00alloy300.00austenitic stainless

Tel +82 55 278 4746 Fax no. +82 55 278 [email protected] web www.doosanheavy.comApproval includes semi-built crankshafts.Certificate No. MD00/0883/0007/3 Expiry date: 07/03/2019

Seongsan-gu,Changwon,Kyungnam,

Changwon Plant22, Doosanvolvo-ro,

0.07carbon SeoulForgingsFORMETAL Co., Ltd.0.07carbon-manganese0.07alloy

As at 04 June 2018 48Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

Tel: +82 41 670 6251 Fax: +82 41 668 7317email: [email protected]: formetal.co.krCertificate No. MD00/4233/0002/3 Expiry Date: 07/10/2019

Jigok-myeon,Seosan-si,Chungcheongnam-do,

229-7, Mujangsaneop-ro,

2.60carbon Busan PortForgingsFelix Technology Co., Ltd.2.60carbon-manganese2.20alloy2.00austenitic stainless1.50duplex stainless*

Including ring rolling to 2500 mm diameter.

Tel: +82-51-796-7870 Fax: +82-51-796-7897email: [email protected]

Certificate No. MD/00/4269/0002/3 Expiry Date: 16/12/2019

Gangseo-gu,Busan,618-220

85 Mieumsandan 3-ro,

9.00carbon Busan PortForgingsGISAN FORGING CO., LTD9.00carbon-manganese4.50alloy

Tel: +82 55 722 3000 Fax: +82 55 722 3002 email: [email protected] web: www.gisan-forgjng.com

Certificate Number: MD/00/3938/0004/3 Expiry date: 30/07/2020

Hallim-myeon,Gimhae-si,Gyeongsangnam-do,

13 Gimhae-daero,1538 beon-gil,

21.00carbon Busan PortForgingsHAE WON SPECIAL FORGING CO., LTD.21.00carbon-manganese21.00alloy

Tel: +82 (0)55 343 2355 Fax: +82 (0)55 343 2366 Mobile: +82 010 4141 7669 Email to: [email protected]

Certificate No. MD00/3245/0005/3 Expiry date: 14/07/2018

Hallim-myeonGimhae-siGyeongnam

16 Gimhae-daero 1099 beon-gil

0.08carbon ChangwonForgingsHANIL FORGING IND. CO., LTD.0.08carbon-manganese0.08alloy

Tel: +82 55 239 3063 Fax: +82 55 284 7023

Web: www.hifg.co.krCertificate No. MD00/3576/0003/3 Expiry date: 28/03/2018

Sungsan-gu,Changwon,

42, Road 97, Sungju-ro

4.00carbon SeoulForgingsHANIL FORGING IND. CO., LTD.4.00carbon-manganese4.00alloy4.00austenitic stainless

Tel: +82 43 536 5181 Fax: +82 43 536 5172email: [email protected] web: www.hifg.co.kr

Certificate No: MD00/4396/0001/3 Expiry Date: 19/10/2017

87, Seupji-Gil, Ducksan-myun,Jincheon-gun, Chungbuk,

(JINCHEON PLANT)

7.00carbon ChangwonForgingsHSF Co. LTD7.00carbon-manganese7.00alloy7.00austenitic stainless

As at 04 June 2018 49Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

Tel: +82 (0)55 344 0795 Fax: +82 (0)55 343 0973 E-mail: [email protected]

Website: www.osungdanjo.com

Certificate No. MD00/3302/0004/3 Expiry date: 05/01/2019

Hallim-myeon,Gimhae-siGyeongnam

122-6, Gimhae-daero 1402 beon-gil,

10.50carbon Busan PortForgingsHWAJOO METAL CO., LTD.10.50carbon-manganese7.50alloy

Tel: 055-366-5006 Fax: 055-366-4050email: [email protected] web: www.hwajoo.com

Certificate No. MD00/3958/0002/3 Expiry date:15/10/2017

42, Yusangongdan 7-gil,Yangsan-si,Gyeongsangnam-do,

38.00carbon ChangwonForgingsHYUNDAI FORGING CO., LTD.38.00carbon-manganese20.00alloy6.50austenitic stainless

Tel: +82 55 580 6533 Fax: +82 55 580 6520 Email mailto:[email protected] Web: http://www.hd-forginf.co.krApproval is restricted to the supply of forged shafts and bars.Certificate No. MD00/3122/0005/3 Expiry date: 08/12/2019

146-1, Hyeonpo-ro, Gunbuk-myeonHaman-GunGyeongsangnam-do

146-1, Hyeonpo-ro

80.00carbon ChangwonForgingsHYUNDAI STEEL COMPANY80.00carbon-manganese60.00alloy

Tel: +82 61 760 7100 Fax: +82 61 725 7733 email: [email protected] web: www.sppycenergy.co.kr

Certificate Number: MD00/3866/0008/3 Expiry date: 11/12/2019

Including Carbon Manganese steel crank throw forgings in Normalised and Normalised and Temepered condition to 26 Tonne.

Approval for C/CMn forgings above 18T weight covers for supply in the Normalised and Normalised and Tempered supply conditions only.

Haeryong-myeonSuncheon City, Jeollanam-doZip code: 540856

46, Yulchonsandan 5-ro

30.00carbon Busan PortForgingsHYUNJIN MATERIALS CO., LTD.30.00carbon-manganese30.00alloy

Tel: +82 51 602 7753 Fax: +82 51 602 7779 Web:http://www.hjmco.co.kr Email: mailto:[email protected] No. MD00/0732/0009/3 Expiry date: 28/11/2018

92, Noksansandan 289-roGangseo-GuBusan

80.00carbon Busan PortForgingsHYUNJIN MATERIALS CO., LTD.80.00carbon-manganese80.00alloy

Including semi built and continous grain flow crankshafts (CGF). CGF crankshafts approved with an enhanced K factor of 1.05.

Tel: +81 51 602 7651/5 Fax: +81 51 602 7600 email: [email protected] web: www.hjmco.co.krCertificate No. MD00/3329/0007/3 Expiry date: 16/03/2019

Gangseo-guBusan

63, Noksanhwajeon-ro

0.04carbon Busan PortForgingsJIN GWANG FORGING CO., LTD.0.04carbon-manganese0.02alloy0.04austenitic stainless

As at 04 June 2018 50Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

Tel No. 0082 55 329 6661 Fax No. 0082 55 329 6660Email [email protected] www.jk6661.co.krCert No MD00/4192/0002/3 Expiry date: 27/06/2019

#80-112, Golden root-ro, Juchon-myeon,Gimhae-si,Gyeongnam-do

2.00carbon Busan PortForgingsJUNG KWANG INDUSTRY CO., LTD2.00carbon-manganese2.00alloy

Tel: +82 55 344 0034 Fax: +82 55 344 2084

E-mail: [email protected]

Website: www.jung-kwang.com

Certificate No. MD00/3435/0005/3 Expiry date: 23/02/2020

Jinyeong-eupGimhae-siGyeongnam

21,Seobu-ro 378 Beon-gil

1.50carbon Busan PortForgingsK.S.P CO., LTD.1.50carbon-manganese1.50alloy1.50austenitic stainless

Tel: +82 51 831 6270~7 Fax: +82 51 831 6256Email: [email protected] Website:http://www.kspvalve.comCertificate No. MD00/2977/0005/3 Expiry date: 08/05/2018

Gangseo-GuBusan

43, Noksansandan381(sambaekpalsibil)-ro 86,

125.00carbon ChangwonForgingsKISCO125.00carbon-manganese55.00alloy

Tel +82 55 260 0746 Fax +82 55 282 4123 Email mailto:[email protected] Web page http://www.kisco.co.kr

Including steelmakingCertificate No. MD00/0884/0011/3 Expiry date: 24/11/2018

ChangwonGyeongnam

12, Gongdan-ro103 beon-gil, Seongsan-gu

4.15carbon UlsanForgingsKOREA FLANGE Co. Ltd.4.15carbon-manganese0.17alloy4.15austenitic stainless0.70duplex stainless*

Tel +82 52 279 4253 Fax +82 52 260 2670eMail [email protected] Web www.kofco.com

Certificate No. MD00/0882/0008/3 Expiry date: 20/03/2020

45, Shinyeocheon-ro, 35 Bean-gil,Nam-GuUlsan

0.02austenitic stainless SeoulForgingsKPF (Korea Parts & Fasteners)

Tel: +82 43 849 1152 Fax: +82 43 849 1233 Email:mailto:[email protected] Web: http://www.kpf.co.krCertificate No. MD00/2841/0006/3 Expiry date: 20/06/2018

Chungju-siChungcheongbuk-do380-250

50, Chungjusandan 5-ro

10.00carbon Busan PortForgingsMYSCO CO., LTD.10.00carbon-manganese7.00alloy7.00austenitic stainless

Tel:+82 55 720 6143 Fax: +82 55 720 6159 email: [email protected] web: www.mysco.co.krCertificate Number: MD00/3167/0005/3 Expiry: 11/01/2019

Juchon-myeonGimhae-siGyeongsangnam-do,

117, Seobu-ro 1499 beon-gil,

As at 04 June 2018 51Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

52.70carbon ChangwonForgingsMYSCO CO., LTD.52.70carbon-manganese52.70alloy20.00austenitic stainless

Tel No: +83 55 720 6140 Fax No: +83 55 720 6199Email: [email protected]: www.mysco.co.krCertificate No: MD00/3944/0003/3 Expiry date: 04/09/2017

49, Bonsan-ro, 193, Beon-gil,Jinyeong-eup, Gimhae-si,Gyeongnam.

5.00carbon Busan PortForgingsNAM KYOUNG S.M. Co., Ltd.5.00carbon-manganese5.00alloy

Tel: +82 55 346 6696 Fax: +82 55 346 6697 Email: mailto:[email protected]: www.namkyoungsm.co.krCertificate No. MD00/3917/0004/3 Expiry date: 03/07/2020

Hallim-myeon, Gimhae-siGyeongsangnam-do

58, Yongdeok-ro 302 beon-gil

30.00carbon Busan PortForgingsPSM, INC.30.00carbon-manganese30.00alloy30.00austenitic stainless

Tel: +82 (0) 51 974 5874 Fax: +82 (0) 51 974 5885 Email: [email protected] Web: http://www.psminc.co.krCertificate No. MD00/1779/0008/3 Expiry date: 05/09/2018

93, Noksanhwajeon-ro,Gangseo-GuBusan

Nok San Factory

0.02carbon Busan PortForgingsSAEWON METAL CO., LTD.0.02carbon-manganese

Tel +82 (0)55 328 6401 Fax: +82 (0)55 338 6450email: [email protected]

Certificate No. MD00/3906/0002/3 Expiry date: 24/04/2017

Approved for close die forging only.Heat treatment sub-contracted.

1499 beon-gil,Juchon-myeon, Gimhae-si,Gyeongsangram-do,

25-54, Seobu-ro

21.00carbon ChangwonForgingsSAM BOO METAL CO., LTD.21.00carbon-manganese21.00alloy

Tel +82 (0)55 802 7700 Fax: +82 (0)55 802 7772 Email: [email protected]: www.samboometal.comCertificate No. MD00/2933/0006/3 Expiry date: 06/11/2020

278-11, Yongjeonsaneopdanji-gil, samnangjin-eup,Miryang-si, Gyeongnam

6.67carbon Busan PortForgingsSAMBU STAINLESS FORGING CO., LTD.6.67carbon-manganese6.67alloy6.67austenitic stainless6.67duplex stainless*

Tel No: +82 51 316 3241 Fax No: +82 51 316 3242

Email: [email protected]

Web: www.sambust.co.kr

Certificate No: MD00/4275/0002/3 Expiry Date: 28/12/2019

#596-14 Hwajeon-Dong,Kangseo-Gu,Busan

0.23carbon ChangwonForgingsSAMMI METAL PRODUCTS CO., LTD.0.23carbon-manganese1.20alloy0.02martensitic stainless*

As at 04 June 2018 52Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

Including Closed die continuous grain flow alloy steel crankshafts with a K factor K1 = 1.05

Tel: +82 55 269 0852 Fax: +82 55 282 9204

E-mail: [email protected]

Web:www.sammiforge.co.kr

Certificate No. MD00/1293/0008/3 Expiry date: 13/10/2019

Changwon-cityKyungnam641-315

55, Sungsan-dong

0.05carbon SeoulForgingsSAMSHIN LIMITED0.05carbon-manganese0.05alloy0.05austenitic stainless

Tel: + 82-41-560-6000 Fax: +82-41-561-1950

Website: www.shamshinvalves.co.kr

Certificate No: MD00/4735/0001/3 15/11/2017

Ipjang-Myeon,Seobuk-Gu,Cheonan-Si.

1138-11, Seongjin-Ro,

57.00carbon UlsanForgingsSEOHAN ENP CO., LTD.57.00carbon-manganese34.70alloy

Tel: +82 707 404 6210 Fax: +82 54 620 3141

email [email protected]

Web http://www.seohanenp.com

Certificate No. MD00/3661/0005/3 Expiry date: 22/08/2018

#173-47, Yongmyeong-ri,Geoncheon-eup, Gyeongju-si,Gyeongbuk, 780-903,

10.00carbon ChangwonForgingsSHIN WOO METAL CO., LTD.10.00carbon-manganese10.00alloy10.00austenitic stainless

Tel No: +82 55 585 2830 Fax No:+82 55 585 2836Email: [email protected]: www.shinwoometal.co.krCertificate No: MD00/4600/0001/3 Expiry Date 28/07/2019

10, Hamansandan 3-gilGunbuk-myeon, Haman-GunGyeongsangnam-do

HAMAN FACTORY

7.00carbon Busan PortForgingsSYF Co., Ltd.7.00carbon-manganese7.00alloy7.00austenitic stainless

Tel: +82 55 329 3520 Fax: +82 55 728 3524 Email: [email protected] No. MD00/0367/0008/3 Expiry date: 09/02/2020

Saengrim-MyunKimhae-SiKyungnam

410, Bonglim-Ri

110.00carbon MokpoForgingsSeAH BESTEEL CORPORATION110.00carbon-manganese110.00alloy

Tel: +82 63 460 8216 Fax: +82 63 460 8423email: [email protected] web: www..seahbestell.co.kr

Certificate No. MD00/1749/0010/3 Expiry date: 03/04/2018

Including combined web and pin forgings for semi built crankshafts in Carbon Manganese steel, supplied in Normalised or Normalised and Temperedcondition, up to 48.3T weight.

Gunsan CityJeonlabuk-Do

Gunsan Plant1-6, Soryong-Dong

As at 04 June 2018 53Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

90.00carbon ChangwonForgingsSeAH CHANGWON INTEGRATED SPECIAL STEEL90.00carbon-manganese30.00alloy8.00austenitic stainless

Tel: +82 (0)55 269 6727 Fax: +82 (0)55 269 6907 Emal:mailto:[email protected] Web: http://www.poscoss.comIncluding steelmakingCertificate No. MD00/1294/0014/3 Expiry date: 08/09/2020

Seongsan-GuChangwon,Gyeongnam

CORPORATION147,Jeokhyeon-Ro

5.00carbon Busan PortForgingsTAE HEUNG FORGING. CO., LTD5.00carbon-manganese4.00alloy2.00austenitic stainless

Tel: +82 55 329 2841 Fax: +82 55 329 2844 Email: [email protected] Web: http://www.thf.co.krApproval includes for heat treatment carried out internally and sub-contract by Dae Chang Metal Heat Treatment Co. Ltd of #1494-4, Songgok-ri,Dassan-Myeun, Goryung-Gun, Kyung Buk, Korea.Certificate Number: MD00/3838/0003/3 Expiry date: 21/09/2019

#413-2 Saengnim-daeroGimhae-Si,Gyeongsangnam-Do,

0.02carbon Busan PortForgingsTAE HUNG METAL CO.0.02carbon-manganese0.02alloy

Tel: +82 51 311 5803 Fax: +82 51 325 8213 Email: mailto: [email protected] Number: MD00/3474/0005/3 Expiry: 31/05/2020

970 Beon-Gil (Rd.)55 Nakdong-daero (Blvd,) Sasang-guBusan

8.00carbon Busan PortForgingsTAESANG CO., LTD.8.00carbon-manganese8.00alloy8.00austenitic stainless

Tel +82 (0)51 209 9044 Fax +82 (0)51 209 9001 Email mailto:[email protected]: http;//www.taesang.co.krCertificate No. MD00/1476/0012/3 Expiry date: 04/06/2019

176beongil,Saha-gu,Busan,

30, Dasan-ro,

130.00carbon Busan PortForgingsTAEWOONG CO., LTD.130.00carbon-manganese60.00alloy60.00austenitic stainless

Tel: +82 51 329 5105 Fax: +82 51 329 5101

Email: [email protected]

Web http://www.taewoong.com

Certificate No. MD00/2833/0007/3 Expiry date: 07/10/2019

Noksan National Industrial Complex67, Noksansandan 27-ro,Gangseo-Gu, Busan

Noksan Factory

7.00carbon Busan PortForgingsWONIL F & T CO., LTD.7.00carbon-manganese6.00alloy3.00austenitic stainless1.92duplex stainless*

Tel No: +881 55346 0680 Fax No:+81 55 346 4832

Email: [email protected]

Certificate No: MD00/4208/0004/3 Expiry Date: 21/07/2019

Hallim - myeon,Gimhae-si,Gyeongsangnam-do

468, Angok-ro,

As at 04 June 2018 54Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

0.01carbon Busan PortForgingsWOOSUNG COMPANY0.01carbon-manganese

Tel: +51 265 7466 Fax: +51 265 7468 Email: mailto:[email protected] http://www.wsdf.co.krCertificate No. MD00/3207/0006/3 Expiry date: 11/12/2020

208 Beon-gilSaha-Gu

7, Dasan-Ro

14.00carbon Busan PortForgingsYCF CO., LTD.14.00carbon-manganese8.00alloy7.20austenitic stainless

Tel: +82 055 724 9200 Fax: +82 055 724 9208

email: [email protected]

Certificate No. MD00/4322/0003/3 Expiry Date: 10/04/2019

Hallim-myeonGimhae-siGyeongsangnam-do

31-8, Anha-ro 116 beon-gil

5.20carbon ChangwonForgingsYOUNG JIN FORGING CO., LTD.5.20carbon-manganese5.20alloy

Tel: +82 55 239 5581 Fax: +82 55 282 2676 Email: [email protected]: http://www.yjforging.co.krCertificate No. MD00/4583/0001/3 Expiry date: 22/05/2019

Haman-gunGyeongnam

No 791-2, Yongsan-RiChilwon-myeon

Mexico

5.00carbon VeracruzForgingsFRISA FORJADOS S.A.DE C.V.5.00carbon-manganese5.00alloy5.00austenitic stainless5.00duplex stainless*5.00martensitic stainless*

Tel: +52 81 8153 0300 ext. 2046 Fax: +52 81 8336 2175 Email: [email protected] Web: http://www.frisa.com*accepted for approved applications Certificate Number: MD00/2788/0006/3 Expiry: 25/03/2019

Col. Los TreviñoSanta Catarina N.L.66350

Valentin G. Rivero 127

0.02carbon VeracruzForgingsTHYSSENKRUPP METALURGICA DE MEXICO S.A. de C.V.0.02carbon-manganese

Tel:+52 222 223 7042 Fax: +52 222 223 7040 Email: [email protected] www.thyssenkrupp-metalurgica.comIncluding connecting rods made of microalloyed steel using controlled cooling. Certificate No. MD00/3092/0004/3 Expiry date: 07/07/2019

San Miguel XoxtlaPueblaCP 72620

Camino a Santa Agueda 1

Montenegro

6.00carbon BeogradForgingsTOS�ELIK NIKŠI� d.o.o.6.00carbon-manganese6.00alloy

Tel: +382 40 202 222 email: [email protected]

Certificate No: MD00/4508/0001/3 Expiry Date: 03/09/2018

Vuka Karadzica bb,81400 Niksic

As at 04 June 2018 55Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

Norway

5.00carbon StavangerForgingsSTAVANGER STEEL AS5.00carbon-manganese5.00alloy5.00austenitic stainless5.00duplex stainless5.00martensitic stainless*5.00precipitation hardened

stainless*

Tel +47 51 74 34 00 Mob: +47 907 47 955 email: [email protected] web: www.stavangersteel.no

* accepted for approved applications

Certificate No. MD00/1313/0008/3 Expiry date: 14/08/2017

N-4100 JørpelandStaalverksvegen 51

Poland

11.00carbon KatowiceForgings"KUZNIA BATORY" Sp. z o.o.11.00carbon-manganese11.00alloy11.00austenitic stainless

Tel: +48 32 7937799 Fax: +48 32 7500669Mobile: +48 698 665 906Email: [email protected] web: www.kuzniabatory.plCertificate No. MD00/2879/0006/3 Expiry date: 29/09/2019

41-506 Chorzówul.Stalowa 1

0.30carbon KatowiceForgingsATI ZKM Forging Sp. z o.o.0.30carbon-manganese0.30alloy

Tel: +48 15813 4337 Fax: +48 15813 5617 Email: [email protected] Web: http://www.ATImetals.comCertificate No. MD00/2904/0007/3 Expiry date: 25/05/2020

ul. Grabskiego 5437-450 Stalowa Wola

125.00carbon KatowiceForgingsCELSA "HUTA OSTROWIEC" Sp. z o.o.125.00carbon-manganese125.00alloy

Tel: +48 (0)41 249 2905 E--mail: [email protected]

Website: www.celsaho.com

Including crankshafts with K factor > 1.0 for approved applications

Certificate No. MD00/2006/0010/3 Expiry date: 24/10/2019

ul. Samsonowicza 227-400 Ostrowiec Swietokrzyski

ZAKLAD WYROBOW KUTYCH

10.00carbon KatowiceForgingsHSW - KUZNIA STALOWA WOLA Sp. z o.o.10.00carbon-manganese10.00alloy

Tel: +48 15 813 56 64 +48 15 8135410 Fax: +48 15 813 54 70

E-mail: [email protected] [email protected]

Website: www.kuzniastalowola.pl

Certificate No. MD00/2407/0007/3 Expiry date: 15/05/2020

ul. Kwiatkowskiego 137-450 Stalowa Wola

3.00carbon KatowiceForgingsHUTA BANKOWA Sp. z o.o.3.00carbon-manganese3.00alloy

As at 04 June 2018 56Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

Tel +48 32 295 7430 Fax +48 32 262 3788 Email: [email protected]; [email protected] Web http://www.hutabankowa.com.plCertificate No. MD00/0716/0004/3 Expiry date: 05/03/2019

The scope of approval covers only the manufacturer of ring type forgings with the maximum diameter of 300 mm

ul. Sobieskiego 2441-300 Dabrowa Górnicza

1.50carbon KatowiceForgingsKUZNIA "GLINIK" Sp. z o.o.1.50carbon-manganese1.50alloy

Tel: +48 18 35 49 525 Fax: +48 18 35 49 504Email: mailto: [email protected] Web: http://www.kuznia.glinik.plCertificate Number: MD00/2131/0008/3 Expiry: 24/09/2018

ul. Chopina 33a38-320 Gorlice

0.03carbon KatowiceForgingsKUZNIA JAWOR S.A. GRUPA GWARANT0.03carbon-manganese0.03alloy0.03austenitic stainless

Tel +48 (0)76 8707612 Fax: +48 (0)76 8702782 email: [email protected] web: www.kuznia.com.pl

Certificate No. MD00/2931/0005/3 Expiry date: 18/11/2017

ul. Kuziennicza 459-400 Jawor

0.18carbon KatowiceForgingsPRZEDSIEBIORSTWO ROBOT INZYNIERYJNYCH0.18carbon-manganese0.18alloy

Tel: +48 32 3453125 (ext.66) Fax:+48 32 3453125 (ext.60) Email: [email protected] or [email protected] Web: http://www.minec.plCertificate Number: MD00/4147/0002/3 Expiry: 15/04/2019

ul. Metalowcow 441-500 Chorzow

"MINEC" Sp. z.o.o.KUZNIA ,,MINEC"

28.00carbon KatowiceForgingsZARMEN FPA Sp.z o.o.28.00carbon-manganese28.00alloy

Tel: +48 77 5457008 Fax: +48 77 5457099Email: [email protected] www.zarmenfpa.plCertificate No. MD00/3455/0005/3 Expiry date: 05/04/2020

37-330 Zdzieszowiceul. Filarskiego 39

Romania

100.00carbon GalatzForgingsDOOSAN IMGB S.A100.00carbon-manganese100.00alloy

Tel: +40 21 301 2849 Fax: +40 21 301 2502 Email: [email protected]

Website: www.doosanimgb.com

Including steelmaking.

Certificate No. MD00/1259/0011/3 Expiry date: 08/09/2020

Berceni Road Nr. 104Sector 4041919 Bucharest

2.50carbon GalatzForgingsS.C. FORJA NEPTUN S.R.L.2.50carbon-manganese2.00alloy

Tel +40 244 307150(82) Fax +40 244 307152email [email protected] web www.forjaneptun.roCertificate No. MD00/3324/0005/3 Expiry date: 09/03/2019

105200 BaicoiStr. Infratirii nr. 295

As at 04 June 2018 57Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

5.00carbon GalatzForgingsS.C. FORJA ROTEC S.R.L.5.00carbon-manganese5.00alloy2.00austenitic stainless

Tel: +40 238 406 046 Fax: +40 238 718 935email: [email protected] web: www.forjarotec.ro

Certificate No: MD00/4475/0001/3 Expiry Date: 26.04.2018

12 Aleea Industriilor Street,120068 Buzau,

0.45carbon GalatzForgingsS.C. FORSEV S.A.0.45carbon-manganese0.45alloy

Tel: +40 (0)252 326 890 Fax: +40 (0)252 326 002 Email: mailto: [email protected] and [email protected] www.forsev.roCertificate No. MD00/3008/0005/3 Expiry date: 20/09/2018

220242, Drobeta Turnu-SeverinJud. Mehedinti

2, Portile de Fier Street

3.20carbon GalatzForgingsS.C. MENAROM P.E.C3.20carbon-manganese3.20alloy

Tel +40 236 448931 Fax: +40 236 448257 Email: [email protected] Web: http://www.menarom.roCertificate No. MD00/2847/0007/3 Expiry date: 29/11/2019

800219-Galatz12 Calea Prutului Street

4.00carbon GalatzForgingsVILMAR S.A.4.00carbon-manganese1.00alloy1.00austenitic stainless1.00duplex stainless

Tel: +40 250 703 850 Fax: +40 250 703 865 Email: [email protected] Web: http://www.genoyer.ro* accepted for approved applicationsCertificate No. MD00/2063/0008/3 Expiry date: 19/02/2021

No. 1, Platforma Industriala Street240050, Râmnicu-Vâlcea

Forging Division

Russia

10.00carbon St. PetersburgForgingsCHELYABINSK METALLURGICAL PLANT PAO10.00carbon-manganese10.00alloy

Tel: +7 351 725 57 27 Fax: +7 351 725 51 76 Email mailto:[email protected] http://www.mechel.ruHead Office Mechel OAO , 123610, Moscow. Krasnopresnenskaya Naberezhnaya, 12, Office 1002 RussiaCertificate #: MD00/3261/0007/3 Expiry date: 10/08/2018

2-d Paveletskaya St - 14

URALS STAMPING PLANT OAO, CHELYABINSK BRANCH454047-Chelyabinsk

200.00Ni Alloy St. PetersburgForgingsCMK

Tel: +7 (496) 644 70 30 Fax: +7 (496) 644 70 02

E:mail: [email protected]

Website: www.cmkgroup.ru

Certificate No: MD00/4668/0001/3 Expiry Date: 05/03/2020

142800 Stupino,Moscow Region.

Pristansionnaya Street, Possession 2,

9.20carbon St. PetersburgForgingsMOTOVILIKHA-GRAZHDANSKOYE MASHINOSTROENIE, LLC9.20carbon-manganese9.20alloy

Tel +8 342 260 7317 Fax +8 342 260 7462 Email: [email protected] Web: http://www.mzperm.ruCertificate No. MD00/4608/0002/3 Expiry date: 08/09/2019

614014, Perm1905 Street, 35

As at 04 June 2018 58Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

120.00carbon St. PetersburgForgingsOMZ - Special Steels120.00carbon-manganese120.00alloy

Phone: +7 812 322 81 50 Fax: +7 812 322 81 07 email: [email protected] web: www.omz-specialsteel.comIncluding steelmakingCertificate No. MD00/2226/0007/3 Expiry date: 23/06/2019

Izhorsky Zavod, Kolpino,Saint-Petersburg, 196650,

Slovenia

24.00carbon ZagrebForgingsMETAL RAVNE d.o.o.24.00carbon-manganese24.00alloy24.00austenitic stainless

Tel: +386 2 870 7200 Fax: +386 2 870 7219email: [email protected] Web: http://www.metalravne.comCertificate No. MD00/2889/0007/3 Expiry date: 30/05/2020

2390 Ravne na KoroškemKoroška cesta 14

Spain

10.00carbon BilbaoForgingsEUSKAL FORGING S.A.10.00carbon-manganese10.00alloy10.00austenitic stainless

Tel: +34 943 691 412 Fax: +34 943 691 654 Email: [email protected] Web: www.euskalforging.comCertificate No. MD00/0541/0008/3 Expiry date: 23/04/2021

Poligono Industrial 20270 Irura20270 IruraGipuzcoa

Gipuzcoa

50.00carbon BilbaoForgingsEUSKAL FORGING S.A.50.00carbon-manganese50.00alloy

Tel No: +39 94 472 3062 Fax +39 94 495 0802Email: [email protected]: www.euskalforging.comCertificate No: MD00/4301/0002/3 Expiry date 26/03/2020

Ribera de la Ria, Poligono s/n48910 SestaoVizcaya

Sestao

4.00carbon BilbaoForgingsFORJAS ALBISU S.A.4.00carbon-manganese4.00alloy

Tel. 943 16 41 42 Fax. 943 88 09 24 email: [email protected] Web http://www.forjasalbisu.comCertificate No. MD00/2796/0006/3 Expiry date: 12/05/2019

20210 LazkaoGuipuzcoa

C/Zubierreka Auzoa 12P.O. Box 12

0.32carbon BilbaoForgingsFORJAS DE CANTABRIA, S.L.0.32carbon-manganese0.32alloy

Tel: +34 9427 50354 Fax: +34 9427 54206 Email [email protected] Web:http://www.forjasdecantabria.comThe scope of approval includes forged continuous grain flow crankshafts.Certificate Number: MD00/0335/0009/3 Expiry: 05/07/2020

39200 ReinosaCantabria

Paseo Alejandro Calonge,1

10.00carbon BilbaoForgingsGAINZA FORGE S.L.10.00carbon-manganese

As at 04 June 2018 59Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

Tel: +34 943 14 78 71 Fax: +34 943 14 77 90 email: [email protected] web: www.gainzaforge.com

Certificate No. MD00/2576/0007/3 Expiry date: 17/08/2020

Barrio Agote n× 7E-20740 ZestoaGuipuzcoa

5.00carbon BilbaoForgingsIRIZAR Forge (FORJAS IRIZAR)5.00carbon-manganese5.00alloy2.50austenitic stainless

Tel: +34 943 88 09 36 Fax: +34 943 88 95 72 Email: mailto:[email protected] Web: http://www.forjas-irizar.comThe scope of approval is for heat treatment carried out by sub-contrcator Razya, S.A. San Miguel de Acha 7, 01010 Vitoria, Spain.Certificate No. MD00/2325/0008/3 Expiry date: 07/05/2020

Hiribaren no. 2620210 Lazkao

90.00carbon BilbaoForgingsSIDENOR Forgings & Castings S.L.U.90.00carbon-manganese90.00alloy90.00austenitic stainless

Tel: +34 942 775 288 Fax: +34 609 242 896 email: borja.lambea@gsidenor com web www.sidenor.com

Certificate Number: MD00/0546/0011/3 Expiry: 17/06/2020

Including approval of semi built crankshafts with a K factor K1 = 1.05- Plus surface deep rolling process K2 = 1.20

Paseo Alejandro Calonje, 139200 Reinosa (Cantabria)

0.14carbon BilbaoForgingsULMA Forja, S. Coop.0.14carbon-manganese

Tel: +34 943 780552 Fax: +34 943 781808 email: [email protected] Web: http://www.ulmapiping.es Certificate No. MD00/0430/0007/3 Expiry date: 23/05/2018

P.O. Box 1420560 OñatiGuipúzcoa

B° Zubillaga, 3

0.75carbon BilbaoForgingsULMA LAZKAO FORGING, S.L.0.75carbon-manganese0.75alloy0.75austenitic stainless

Tel: +34 943 805 333 Fax: +34 943 889 137email: [email protected] web: stp.es

Certificate No: MD00/4411/0002/3 Expiry Date: 15/02/2020

Apartado 49,20210 Lazkao,Gipuzcoa,

Zubierreka, 52

Sweden

5.00austenitic stainless GothenburgForgingsAB SANDVIK MATERIALS TECHNOLOGY5.00duplex stainless*

Tel: +46 (0) 26 263311email: [email protected] web: www.smt.sandvik.com

Certificate No. MD00/2173/0007/3 Expiry date: 29/10/2018

Approval include semi-finished products of forged round bars with maximum diameter 450mm, 3600mm longApproval include semi-finished products of forged square blooms up to 350mm wide, 4300mm long* for approved applications.

SE-811 81 Sandviken

1.00carbon GothenburgForgingsBHARAT FORGE KILSTA AB1.00carbon-manganese1.00alloy

As at 04 June 2018 60Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

Tel: +46 586 247239 Fax: +46 586 63270 Email: [email protected]

Web:http://www.bharatforge.com

Including crankshafts with K factor > 1.0 for approved applications

Certificate Number: MD00/0750/0008/3 Expiry: 05/02/2021

S 69127 KarlskogaBox 428

0.10austenitic stainless StockholmForgingsNORDIC FLANGES AB

Tel: +46 70 383 6060email [email protected] web: www.nordicflanges.comCertificate Number: MD00/2983/0007/3 Expiry: 29/05/2021

Kavelvägen 17SE - 894 35 Själevad

3.70carbon GothenburgForgingsOVAKO SWEDEN AB3.70carbon-manganese3.70alloy

Tel: +46 290 251 95 Fax: +46 290 259 39 email: mailto:charlotta [email protected] web: http://www.ovako.comCertificate Number: MD00/3710/0004/3 Expiry: 25/11/2020

813 83 HoforsBusiness Unit Tube & Ring

60.00carbon GothenburgForgingsSCANA STEEL BJÖRNEBORG AB60.00carbon-manganese60.00alloy

Tel: +46 550 251 30 Fax: +46 550 269 5884email: [email protected] web: www.scana.no

Certificate Number: MD00/2769/0005/3 Expiry: 02/08/2018

Kristinehamnsvägen 2S-68071 Björneborg

6.00carbon GothenburgForgingsSODERFORS STEEL AB6.00carbon-manganese6.00alloy

Tel: +46 293 177 60 Mob: +46 72 208 50 38email: [email protected] web: www.sosteel.se

Certificate No: Expiry Date:

Mellanverksvägen,815 04 Söderfors

Switzerland

5.00carbon HamburgForgingsIMBACH & CIE AG5.00carbon-manganese5.00alloy5.00austenitic stainless

Tel: +41 62 748 44 44 Fax: +41 62 748 44 40

E-mail: [email protected] Website: www.imbach.com

Certificate No. MD00/0752/0008/3 Expiry date: 08/08/2020

CH-6244 NebikonStämpfelfeld 9,

5.00carbon StuttgartForgingsSCHMIEDEWERK STOOSS AG.,5.00carbon-manganese5.00alloy5.00austenitic stainless5.00duplex stainless*5.00ferritic stainless*

Tel: +41 (0)43 322 6210 Fax: +41 (0)43 322 6201

E-mail: [email protected]

Website: www.stooss.com

* accepted for approved applications

Certificate No. MD00/2046/0008/3 Expiry date: 18/07/2020

Maienbrunnenstrasse 8Postfach 45CH-8908 HEDINGEN

As at 04 June 2018 61Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

Taiwan, Republic of China

0.05carbon KaohsiungForgingsBOTH-WELL STEEL FITTINGS Co. Ltd.0.05austenitic stainless

Tel: +886 7371 1536 Fax: +886 7371 3864 Email: mailto:[email protected] Web: http://www.bothwell.com.twCertificate No. MD00/0208/0008/3 Expiry date: 13/02/2021

Ren-Wu DistrictKaohsiung City 81460

No. 303, Ren-Sin Road

16.00carbon KaohsiungForgingsNAN LUNG STEEL & IRON CORPORATION16.00carbon-manganese

Tel: +886 7 616 2931 Fax: +886 7 616 6789 Email: mailto:[email protected] Certificate Number: MD00/2722/0007/3 Expiry: 14/07/2018

Yen Chao DistrictKaohsiung City

No. 344, Chang An Road

10.00carbon KaohsiungForgingsSAN ENG STEEL FORGING CO., LTD.10.00carbon-manganese

Tel: +886 7 3724249 Fax: +886 7 3712923 Email: mailto:[email protected] Web: http://www.saneng.com.twCertificate No. MD00/1299/0007/3 Expiry date: 09/02/2018

Renwu Dist.No. 311 Ren-Sin Road

The Netherlands

1.25alloy AmsterdamForgingsGROFSMEDERIJ NIEUWKOOP B.V.

Tel: +31 (0)172 579303 Fax: +31 (0)172 571073email: [email protected] web: www.gnweb.com

Certificate No:MD00/4618/0002/3 Expiry Date: 04/10/2019

Transportweg 47,2421 LT Nieuwkoop,Zuid Holland,

Turkey

5.60carbon IstanbulForgingsAKMETAL METALURJI ENDUSTRISI A.S.5.60carbon-manganese5.60alloy

Tel +90 216 593 03 08 Fax: +90 216 593 03 82 email: [email protected] web: www.akmetal.comCertificate No. MD00/2811/0004/3 Expiry date: 12/07/2020

Tepeören Mah, No. 23634959 TuzlaIstanbul

Eski Ankara Asfalti cad.

0.19carbon-manganese IstanbulForgingsKANCA EL ALETLERI DÖVME ÇELIK VE MAKINE SANAYII A.S.0.19alloy

Tel No: +90 216 678 86 00 Fax No: +90 216 678 86 01

Email: [email protected] & [email protected]

Web: www.kanca.com.

Certificate No: MD00/4100/0002/3 Expiry date 26/11/2018

1.Cadde41480 Sekerpinar ÇayirovaÇayirova - Kocaeli

TOSB ( Taysad Org. San Bölg.)

Ukraine

12.00carbon MykolaivForgings "FERRIT" Additional Liability Company"12.00carbon-manganese

Tel: +380 56 775 1974 Fax: +380 56 741 7339email: [email protected] web: www.ferrit.dp.uaCertificate No. MD00/2819/0007/3 Expiry date: 01/09/2019

Post code 49101Dnepropetrovsk

3, Sukhoi Ostrov St.

As at 04 June 2018 62Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

95.00carbon MykolaivForgingsPJSC "ENERGOMASHSPETSSTAL"95.00carbon-manganese95.00alloy

Tel: +38 (06264) 6-94-93 Fax: +38 (06264) 6-94-93Email: [email protected] No. MD00/3575/0005/3 Expiry date: 14/03/2021

Donetsk Region84306 Kramatorsk

9.00carbon MykolaivForgingsSUBSIDIARY ENTERPRISE9.00carbon-manganese

Tel: +38 0542 773 201 Email to: [email protected]

Includes steelmakingCertificate No.: MD00/4256/0001/3 Expiry Date: 17/11/2016

Sumy City40020

"DRILL COLLARS AND KELLYS PLANT"2, Komarova str.,

United Kingdom

0.58carbon Newcastle upon TyneForgingsBARRETT STEEL ENERGY PRODUCTS - FORGE DIVISION0.58carbon-manganese0.58alloy0.58austenitic stainless

Tel: +44 (0)191 263 8686 Fax: +44 (0)191 262 6428 Email: mailto: [email protected] Web:http://www.bsep.comIncluding special stainless steel for approved applications.Certificate No. MD00/0946/0009/3 Expiry date: 29/03/2018

Wincomblee RoadLow WalkerNewcastle Upon Tyne NE6 3QQ

0.35carbon BirminghamForgingsBIFRANGI UK LIMITED0.35carbon-manganese0.35alloy0.35austenitic stainless

Tel: +44 (0)1522 585814 Fax: +44 (0)1522 529116

E-mail: [email protected]

Website: www.bifrangi.co.uk

Certificate No. MD00/1597/0008/3 Expiry date: 02/07/2020

Including crankshafts with K1 factor = 1.05 for approved applications

Tower WorksLincolnLN2 5DT

P.O. Box 22

2.00carbon Energy Coventry, UKForgingsFIRTH RIXSON FORGINGS LIMITED2.00carbon-manganese2.00alloy2.00austenitic stainless2.00duplex stainless*

* accepted for approved applicationsTel: +44 114 219 3314 EMail: mailto: [email protected] Web http://www.firthrixson.comCertificate #: MD00/0595/0009/3 Expiry date: 31/07/2018

WincobankSheffieldS9 1HD

Meadowhall and River Don SitesMeadowhall Road

2.00carbon BirminghamForgingsFIRTH RIXSON FORGINGS LIMITED2.00carbon-manganese2.00alloy2.00austenitic stainless

As at 04 June 2018 63Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

Tel: +44 114 219 3626

E-mail: [email protected]

Website: www.arconic.com

Titanium and Nickel based alloys may be accepted for approved applications.

Certificate No. MD00/4502/0002/3 Expiry date: 09/03/2020

MatlockDerbyshire DE4 2JB

Darley Dale

8.00carbon BirminghamForgingsINDEPENDENT FORGINGS & ALLOYS LIMITED8.00carbon-manganese8.00alloy8.00austenitic stainless

Tel: +44 114 229 2853 Fax: +44 114 234 0261 web: www.independentforgings.com

Certificate No. MD00/0738/0009/3 Expiry date: 24/01/2020

Victoria ForgeLivesey StreetSheffield S6 2BL

0.01carbon LiverpoolForgingsSDF AUTOMOTIVE

Approval covers manufacture of carbon steel spilt fracture connecting rod forgings. Approved applications only.

Tel: +44 (0) 1562 823451 Fax: +44 (0) 1562 754336

Website: www.sdf-auto.co.uk

Certificate No. MD00/4612/0001/3 Expiry Date: 17/09/2016

Stourport Road,Kidderminster.DY11 7QB

PO BOX 19

285.00carbon BirminghamForgingsSHEFFIELD FORGEMASTERS INTERNATIONAL LTD.285.00carbon-manganese285.00alloy50.00austenitic stainless

Tel: +44 (0)114 244 9071 Fax: +44 (0)114 251 9021 Email: [email protected]

Website: www.sheffieldforgemasters.com

Certificate No. MD00/0524/0009/3 Expiry date: 29/06/2020

Brightside LaneSheffield S9 2RW

P.O. Box 286

50.00carbon LiverpoolForgingsSOMERS FORGE Ltd.50.00carbon-manganese50.00alloy50.00austenitic stainless

Tel: +44 (0)121 585 5959 Email: mailto:[email protected] Web: http://www.somersforge.comCertificate No. MD00/1399/0008/3 Expiry date: 07/07/2020

HalesowenWest MidlandsB62 8DZ

Haywood ForgeProspect Road

United States of America

0.20alloy ChicagoForgingsCANTON DROP FORGE

Tel: +1 330 477 4511 Fax: +1 330 477 2046email: [email protected] web: www.cantondropforge.com

Approval is for closed die forged gear blanks supplied in normalised condition intended for further heat treatment.

Certificate No: MD00/4664/0001/3 Expiry Date: 21/02/2020

4575 Southway St, S.W.,Canton,Ohio 44706

As at 04 June 2018 64Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

20.00carbon ChicagoForgingsELLWOOD CITY FORGE20.00carbon-manganese20.00alloy

Tel: 1800 843 0166 Ext 3112 and +1 724 752 0055 Fax: +1 724 752 3409

E-mail: [email protected]

Website: www.ellwoodcityforge.com

Materials Quality Scheme Approved - Approval No. MQS 050

Certificate No. MD00/3568/0004/3 Expiry date: 30/05/2019

PO Box 31Ellwood CityPA16117

800 Commercial Ave

7.00carbon ChicagoForgingsELLWOOD NATIONAL CRANKSHAFT7.00carbon-manganese7.00alloy

Tel: +1 814 563 8946

E-mail; [email protected]

Website: www.ellwoodgroup.com

Approval also includes Ellwood Crankshaft and Machine Co. 2727 Freedland Road, Hermitage, PA. USA

Materials Quality Scheme Approved - Approval No. MQS 043Certificate No. MD00/1067/0012/3 Expiry date: 05/06/2020

One Front StreetIrvine, PA 16329

3.30alloy ChicagoForgingsFIBA TECHNOLOGIES INC.

Tel: +1 508 887 7100 Fax: +1 508 754 2254email: [email protected] web: www.fiba.com

Certificate No.: MD00/4295/0002/3 Expiry Date: 02/03/2017

Approved for quench and tempered seamless pressure vessels manufactured by pipe spinning process to the requirements of AD2000.

Approval includes pipe spinning process carried out at FIBA Technologies Inc. 53 Ayer Road, Littleton MA. 01460. USA.

Maximum approved dimensions = 610mm o/d x 21mm w/t.

1535 Grafton Road,Millbury,MA 01527,

20.00carbon ChicagoForgingsSCOT FORGE20.00carbon-manganese20.00alloy

Tel: +1 815 675 4281 Fax: +1 847 587 2000Contact: Steve HughesEmail: [email protected] Web: http://www.scotforge.comCertificate #: MD00/1330/0008/3 Expiry date: 06/05/2020

Spring GroveIllinois 60081

Spring Grove Works8001 Winn Road

17.00carbon ChicagoForgingsSCOT FORGE17.00carbon-manganese17.00alloy

Tel: +1 815 675 4281 Fax: +1 847 587 2000Contact: Steve HughesEmail: [email protected] Web: http://www.scotforge.comCertificate No. MD00/1331/0008/3 Expiry date: 06/05/2020

105 Scot DriveClintonWisconsin 53525

Clinton Works

1.50carbon ChicagoForgingsSCOT FORGE1.50carbon-manganese1.50alloy

As at 04 June 2018 65Page

© Lloyd’s Register Group Limited 2018. All rights reserved.

OfficeName and Address GradeCategory

List 3Approved Manufacturers

of Steel Forgings

Max Weight Tonnes

Tel: +1-800-435-6621 Fax: +1 847-587-2000 Email: mailto: [email protected] Web: http://www.scotforge.comCertificate #: MD00/1961/0008/3 Expiry date: 22/05/2019

9394 West Belmont Ave.Franklin ParkIlinois 60131

Franklin Park Works

0.29carbon ChicagoForgingsTHYSSENKRUPP CRANKSHAFT COMPANY0.29carbon-manganese

Tel: +1 217444 5326email: [email protected]: www.thyssenkrupp.comCertificate No. MD00/0902/0009/3 Expiry date: 12/06/2020

P.O. Box 214DanvilleIllinois 61832

Danville Forging Division1000 Lynch Spur Road

Vietnam

0.10carbon Hai PhongForgingsFELIX METAL TECH CO., LTD0.10carbon-manganese0.10austenitic stainless

Tel: +84 31 3692 194 Fax: +84 31 3692 193email: [email protected] web: www.fete.co.krCertificate No: MD00/4539/0001/3 Expiry date: 03/01/2019

Luu Kiem Commune,Thuy Nguyen Dist,Hai Phong

Bac Hamlet,

As at 04 June 2018 66Page

Lloyd's Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as ‘Lloyd's Register’. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. © Lloyd’s Register Group Limited 2018. All rights reserved.