light is osram€¦ · application and design guide light is osram ... features & benefits ......

Light is the solution ENCELIUM® Energy Management System Application and Design Guide

Light is OSRAM

www.encelium.com

2

Table of contentsThis brochure is designed as an introductory guide to the ENCELIUM® Energy Management System

and how to incorporate system components into your facility. The typical layout drawings included

herein are meant to provide general examples of how our system can be implemented to achieve

the greatest amount of lighting control in a particular space for optimized energy savings.

Components ENCELIUM Energy Management System 4

ENCELIUM Hardware 6

ENCELIUM System Architecture 10

Table of contents

3

Office

Quality office lighting control may increase a company’s bottom line while improving employee morale. The ENCELIUM® Energy Management System easily adapts to the lighting requirements of any space to maximize lighting energy savings while still allowing employees control of the lighting in their personal workspace.

Private Office 12

Open Office 13

Conference Room 14

Lobby/Reception Area 15

Break Room 16

Storage/Warehouse 17

Education Educational facilities typically consist of a large array of buildings and spaces, each with differing uses and lighting requirements. The ENCELIUM Energy Management System easily adapts to the lighting requirements of any space to maximize lighting energy savings while providing the right amount of light when and where required.

Classroom 23

Laboratory 24

Auditorium 25

Dining Hall 26

Library 27

Gymnasium 28

Healthcare Bringing quality lighting into healthcare facilities positively impacts human health and the performance of patients, visitors and staff. The ENCELIUM Energy Management System easily adapts to the lighting requirements of any space to maximize lighting energy savings while ensuring the comfort and safety of patients and staff.

Patient Room 18

Nurses Station 19

Waiting Room 20

Laboratory 21

Surgical Suite 22

Common Areas The ENCELIUM Energy Management System reduces lighting energy consumption in rooms that are used intermittently.

Rest Room 29

Corridor 30

Storage Room 31

Spaces

ENCELIUM Energy Management System

4

OSRAM, one of the leading light manufacturers in the world, offers intelligent lighting controls in the form of the

ENCELIUM Energy Management System (EMS). The ENCELIUM EMS was designed from the ground up as a

software-based, integrated lighting control and energy management system that dynamically responds to the

changing characteristics of a building by providing the right amount of light when and where required. This

first-of-its kind system allows for building owners and facility managers to provide comfortable lighting to

all occupants despite varying needs, while conserving lighting energy consumption and optimizing lighting

energy savings.

ENCELIUM® Energy Management System

ENCELIUM Polaris 3D® is the central control software application used to commission, configure, and manage the ENCELIUM EMS. It enables configuration of every system parameter in a building for each individual user or space and establishes the baseline settings. The ENCELIUM Polaris 3D software offers enhanced ability to analyze and update lighting layouts from an intuitive and easy-to-use computer inter-face. This brings lighting control to a whole new level, by giving facility managers the ability to easily control individual luminaires, groups of luminaires, entire floors, or even entire buildings right from their desktop or laptop.

The ENCELIUM Polaris 3D software has the ability to display and com-municate energy savings in a variety of formats for any specified period of time. Reports generated can focus on an entire building all the way down to an individual luminaire, show overall savings or be broken down by energy management strategy. This type of granular control can help identify lighting-related inefficiencies or operational anomalies anywhere in a facility.

Features & Benefits

— Intuitive, user-friendly software that shows an interactive, 360° 3D building view

— Generates real-time energy savings data in formats ranging from kWh to dollars

— Provides users with the ability to easily adjust lighting layouts without physical rewiring of your multi-facility campus

— Change set points and time schedules for multiple zones as desired right from your web browser

— Easy detection of lighting status, consumption and energy trends from colorized lighting system data representation

Smart control strategies

The ENCELIUM Energy Management System (EMS) is the only lighting control system that seamlessly employs these energy management strategies simultaneously.

— Smart time scheduling — Daylight harvesting — Task Tuning — Occupancy Control — Variable Load Shedding — Personal Control — Plug Load Control

The ENCELIUM EMS provides maximum energy savings when combining the above smart control strategies as well as other energy savings tech-niques. It can be integrated with other building management systems including HVAC, shade control and fire alarm systems for further controlla-bility. Further savings can be generated through controlling emergency lighting. This system is continually upgraded to integrate new features and strategies to maximize controllability now and into the future.

ENCELIUM Energy Management System

5

ENCELIUM GreenBus IIENCELIUM GreenBus II is a two-wire communica-tion platform for supplying data and power to the ENCELIUM Energy Management System. This next generation bus system dramatically raises the capability to deliver power to sensors and wall-stations while increasing the number of devices supported by a single ENCELIUM Energy Control Unit (ECU). ENCELIUM GreenBus II includes enhanced troubleshooting features such as the ability for the system to detect and locate field bus communication faults via the ENCELIUM Polaris 3D® software.

Features & Benefits

— Individual dimming control of thousands of luminaires — Integrates analog 0-10V dimming ballasts/drivers, standard non-dimming ballasts/drivers and DALI-based systems

— BACnet® compatible for easy integration with other building automation systems, such as HVAC, fire and security

— Integrates sensors and relay-based controls into a one flexible control system

— Installs quickly and easily

Innovative Communication NetworksENCELIUM® Energy Management Systems use the following networks: ENCELIUM GreenBus II®, Wireless

Mesh based on ZigBee® standards, or DALI (Digital Addressable Lighting Interface). These are cross plat-

form systems that are compatible with each other so that you are no longer locked into a single, proprietary

system. This not only offers flexibility but can scale to meet any need. These diverse options allow wired

and wireless networks to integrate into hybrid ecosystems.

ENCELIUM Wireless Network OSRAM is a member of the ZigBee Alliance. ENCELIUM's Wireless Energy Management System is based on open and interoperable ZigBee standards. This allows you to locate sensors and wallstations in hard-to-reach locations because no wiring is required. Each Wireless Manager can control up to 100 nodes allowing you the flexibility to provide cost effective controls to a variety of locations. The new wireless system includes enhancements to the ENCELIUM Polaris 3D® software that includes auto-backup to a Micro SD card, IP address recovering mechanism, and battery status view for wireless devices.

The ENCELIUM Energy Management System (EMS) communicates via a mesh

network based on ZigBee standards on the second floor and via an ENCELIUM

GreenBus II communication network on the first floor. The drawing shows a hybrid

system incorporating both wired and wireless components. Sensors, wallstations,

touchscreens and relays may all be incorporated into the ENCELIUM system.

FLO

OR

1FL

OO

R 2

Max ambient temperature +50ºCInput: Class 2 Only24V AC, 50/60Hz, min 40VA Relay Panel ModuleEN-RPM-24C-GB2

Install per installation instruction sheet and electrical & building codes. Connect to ENCELIUM GreenBusII System only.CAUTION - To Reduce the Risk of Fire or Electric Shock Do Not Interconnect The Outputs Of Different Class 2 Circuits85-116-DA

Item No 45268

Q1Q2Q3Q4Made in Canada2012201320142015Emergency Lightingand Power EquipmentEnergy Management Equipment Subassembly6NA8

Ethernet Switch

Line Power

Relay Panel

Line Power & Dimming

Emergency All On

Backup

1 2 3 4 5 6 7 8 to USB Restore from USB Installation Mode Cycle 100% 25% 0%

Con�rm

F5

F6

F7

Switch Leg

LCD Touch Screen

Ethe

rnet

Net

wor

k

WWW

PoE Injector

Router

Wireless Manager

Cont

rol W

ire

AC Phase CutDimming Fixtures

Ethernet Connections Luminaire with LCMLegend

Wallstation

WWW

Remote access for commissioningand technical support

Occupancy Sensor with SIM

Photo Sensor with SIM

PoE Connections

Wireless Wallstation

Wireless SensorLuminaire with WCM

ECU G4SSU

Polaris 3D®/PCS™/CarbonWatch™


PCDM (AC Phase CutDimming Luminaires)

Luminaire with ALC(Switch Leg/Group Control)

Line PowerENCELIUM® GreenBus II

DALI (Digital Addressable Lighting Interface) Network DALI is an international standard, firmly estab-lished all over the world. Created specifically for digital lighting control, it provides a single interface for all electronically controlled light sources in an easy-to-install and versatile system. It has almost unlimited scalability, is easy to manage and is very cost-effective through energy savings. DALI Is a daisy chain communication standard that supplies data and power to the system components.

FLO

OR

1FL

OO

R 2

Max ambient temperature +50ºCInput: Class 2 Only24V AC, 50/60Hz, min 40VA Relay Panel ModuleEN-RPM-24C-GB2

Install per installation instruction sheet and electrical & building codes. Connect to ENCELIUM GreenBusII System only.CAUTION - To Reduce the Risk of Fire or Electric Shock Do Not Interconnect The Outputs Of Different Class 2 Circuits85-116-DA

Item No 45268

Q1Q2Q3Q4Made in Canada2012201320142015Emergency Lightingand Power EquipmentEnergy Management Equipment Subassembly6NA8

Ethernet Switch

Line Power

Relay Panel

Line Power & Dimming

Emergency All On

Backup

1 2 3 4 5 6 7 8 to USB Restore from USB Installation Mode Cycle 100% 25% 0%

Con�rm

F5

F6

F7

Switch Leg

LCD Touch Screen

Ethe

rnet

Net

wor

k

WWW

PoE Injector

Router

Wireless Manager

Cont

rol W

ire

AC Phase CutDimming Fixtures

Ethernet Connections Luminaire with LCMLegend

Wallstation

WWW

Remote access for commissioningand technical support

Occupancy Sensor with SIM

Photo Sensor with SIM

PoE Connections

Wireless Wallstation

Wireless SensorLuminaire with WCM

ECU G4SSU



PCDM (AC Phase CutDimming Luminaires)

Luminaire with ALC(Switch Leg/Group Control)

Line PowerENCELIUM® GreenBus II

ENCELIUM Hardware

6

Function

ENCELIUM® Hardware

Description

ENCELIUM GreenBus II® Communication Network

Sensors

Provides low voltage power to all

devices on the network eliminating

the need for external power supplies.

Collects information from lighted

space on occupancy or daylight.

— Enables cost effective, individual dimming

control of thousands of luminaires in a building.

— Integrates peripheral devices such as occu-

pancy sensors, photo sensors, wallstations

and lighting controllers…etc.

— Originates at an Energy Control Unit and

typically propagates in a daisy-chain fashion

from device to device.

— Integrates wired devices into a wireless

system to create a hybrid system.

— Collects occupancy and daylight information

using Passive Infra-Red (PIR) wireless sensors

with integral photosensor.

— Collects occupancy information using PIR or

dual tech (PIR/Ultrasonic) wired sensors with

wall or ceiling mount options.

— Allows sensor settings to be adjusted through

Polaris 3D® Software for maximum savings.

Wireless Manager (WM) Collects information from sensors

and wallstations.

— Adjusts appropriate brightness levels and

ON/OFF status for each luminaire and zone.

— Determines what action to take based on

status signals from sensors.

Energy Control Unit (ECU) Collects information from photo

sensors, occupancy sensors, and

wall mounted lighting controllers.

— Adjusts appropriate brightness levels and

ON/OFF status for each luminaire and zone.

— Determines what action to take based on

status signals from sensors.

System Support Unit (SSU) Acts as the database server

for all data related to an

ENCELIUM system.

— Stores all system settings and parameters

and logs historical data regarding operational

and energy savings results.

— Provides the ability to remotely access the

ENCELIUM system in order to change system

settings or configurations, analyze system

performance and energy data, and trouble-

shoot any problems.

ENCELIUM Hardware

7

Wireless/Wired Area Lighting Controller (WALC/ALC)

Sensor Interface Module (SIM)

Wireless/Area Lighting Controller (WALC/ALC)

Dual Relay Luminaire Control Module

Function

Provides an interface between

occupancy or photo sensors and

the ENCELIUM GreenBus II

communication network.

Provides a high power switching and

dimming interface between a group

of luminaires and the ENCELIUM

network.

Provides the switching capability

of two LCM modules in a single

package as an interface between

luminaires and the ENCELIUM EMS.

Description

— Enables each sensor to be independently

controlled and configured to best meet the

needs of the facility.

— Automatically detects and adjusts itself

to the type of sensor to which it is wired.

— Establishes a two-way communication between

the Energy Control Unit (ECU) and itself.

— Switches a single wired zone of multiple

luminaires ON or OFF while setting the zone’s

overall light level with a 0-10V dimming output

wired to the dimming ballasts or LED drivers

of the luminaires.

— Can switch an entire circuit of electrical

loads and is suitable for general purpose

plug load control.

— Replaces the need for standard power relays

or switch packs.

— Enables inboard/outboard switching, step

dimming or two luminaire switching by

controlling two AC loads independently.

— Can be connected to power relays or switch

packs in order to switch larger electrical loads.

Luminaire Control Module (LCM) Provides an interface between

ballasts, LED drivers and the

ENCELIUM GreenBus II

communication network.

— Enables each ballast or LED driver to be

independently controlled and configured

to best meet the needs of the facility.

— Switches or dims luminaire based on two-way

communication with ECU.

— Can switch or dim any conventional 0-10V

dimming ballast, non-dimming ballast,

LED driver, or 0-10V LED driver.

Wireless Control Module (WCM) Provides an interface between

luminaires, sensors and the wireless

network.

— Enables each ballast or LED driver to be

independently controlled and configured

to best meet the needs of the facility.

— Switches or dims luminaire based on two-way

communication with WM.

— Can switch or dim any conventional 0-10V

dimming ballast, non-dimming ballast,

LED driver, or 0-10V LED driver.

— Enables each sensor to be independently

controlled and configured to best meet the

needs of the facility.

— Enables ENCELIUM® GreenBus II® devices

to become part of wireless network.

ENCELIUM Hardware

8

Function Description

Three-Zone Wallstation

Two Button Wallstation

Industrial Push Button

Touch Screen Panel

Provides ON/OFF switching for up

to three lighting zones configured

through the ENCELIUM Polaris 3D

software.

Provides local ON/OFF and dimming

control for a single zone configured


software.

Provides local ON/OFF control over

a single lighting zone configured


software.

Allows the ENCELIUM EMS to be

controlled with an interactive 7"

flush-mount LCD touch screen display.

— “Activates” or “de-activates” a lighting zone

indicated by an LED display with white

indicating ON and blue indicating OFF.

— Where lighting zones are controlled by a time

schedule, this wallstation can override the

time schedule by simply “re-activating” the

zone about to be shut down.

— Available in ENCELIUM GreenBus II or

wireless models.

— A short press of the upper/lower buttons

turns lighting ON/OFF while a “press and

hold” dims lighting up or down.



time schedule by the press of the upper

button which “re-activates” the zone about

to be shut down.

— Available in ENCELIUM GreenBus II or

wireless models.

— “Activates” or “de-activates” a lighting zone

indicated by an LED display with white

indicating ON and blue indicating OFF.



time schedule by simply “reactivating” the

zone about to be shut down. During shut

down mode, the wallstation will alternately

flash blue and white LEDs to indicate to

occupants that an override is necessary.

— Provides the ability to recall multiple scenes

for a given zone.

— Ideal for large multi-purpose spaces where

lighting requirements vary throughout the day.

Three-Scene Wallstation Provides customized light level

control for a single lighting zone.

— Allows the user to select three pre-pro-

grammed light levels or “scenes” for a single

zone by the push of a button.

— Scene configuration is programmed and

changed through the ENCELIUM® Polaris 3D®

software.

— Available in ENCELIUM GreenBus II®

or wireless models.

ENCELIUM Hardware and Software

9

Function Description

Personal Control Software (PCS)

ENCELIUM® Polaris 3D®

CarbonWatch Software

BACnet Interface Module

Web-based application, featuring an

interactive three-dimensional view

of a building or complex in real-time.

Application which enables individuals

in a building to control lighting levels

in their workspace from their own

desktop PC.

Displays the energy and carbon

reduction performance of a building

controlled by the ENCELIUM EMS.

Enables the integration of the

ENCELIUM EMS with any BACnet

compatible building automation

system.

— Facility managers are now able to see an

entire facility or complex in a convenient

3D snapshot allowing for faster and easier

navigation to desired control zones.

— Provides an enhanced user experience

and allowing access to the system from

a web browser.

— User can control and preset the light levels

of each luminaire or group of luminaires in

their workspace.

— PCS is installed on a user’s local computer

and can be accessed by clicking on a light

bulb icon appearing in the system tray found

on the lower right hand side of the PC screen.

— CarbonWatch is a slide show that can be

customized to show sustainability data,

highlight corporate initiatives and foster

awareness for lighting conservation.

— The CarbonWatch software runs off a

network connection to the ENCELIUM EMS.

— The ENCELIUM EMS operates autonomously

while lighting status, light levels and energy

usage are all shared and can be controlled

via BACnet.

— Connects to HVAC, fire, and security

systems.

AV Interface Resides on SSU, allowing the

integration of audio-visual systems

to the ENCELIUM EMS.

— Allows various scenarios for a given space

by changing lighting, audio and visual to

achieve a desired atmosphere.

— In many cases, these scenarios can be

recalled through an interactive touch screen.

ENCELIUM System Architecture

10

To Internet or LAN

Energy Control Unit

System Support Unit

ENCELIUM Polaris 3D® Software

— Each luminaire, sensor and wallstation is connected back to the Energy Control Unit (ECU) or Wireless Manager (WM).

— All components are individually addressable and networked back to an Energy Control Unit (ECU) or Wireless Manager (WM).

— The System Support Unit (SSU) stores system settings and logs historical data, enabling the ENCELIUM EMS to analyze system performance and energy information.

— Internet or LAN connection allows floor plan based control software to be operated anywhere on the network.

— Changes to lighting layouts are made through the ENCELIUM Polaris 3D® software.

— Through the Advanced Energy Reporting Module, the ENCELIUM Polaris 3D software generates energy savings in a variety of graphical formats for any specified period of time or building area.

System ArchitectureThe software-based ENCELIUM® EMS networks stand-alone lighting components through intelligent

hardware creating an integrated lighting control and energy management system for optimal savings.

and/or

ENCELIUM System Architecture

11

Occupancy Sensors

— Occupancy sensor settings are configurable through the ENCELIUM Polaris 3D® software.

— Set time delay to the minimum on occupancy sensors connected to the ENCELIUM EMS. Time delays are set through the ENCELIUM Polaris 3D software. With the ENCELIUM EMS, occupancy sensors employ aggressive time-outs by using a two-stage occupancy sensing fea-ture. Luminaires in a zone are in “dim” status in response to lengths of time where no occupancy is detected and turn bright in response to occupancy detection.

— The ENCELIUM EMS also provides Personal Control Software which acts as a virtual occupancy sensing feature at individual work stations.

— Occupancy sensors should be placed out of the line-of-sight of doorways, office furniture and decoration.

Comfort Zones

— The ENCELIUM system allows for the creation of “comfort” or “support” zones in areas adjacent to occupied rooms to ensure that occupants are not isolated for both comfort and safety.

— Examples of “comfort zones” would be the areas immedi-ately outside of a private office, corridors leading to exits, and elevators.

— With the ENCELIUM Energy Management System, all of these comfort zones can be grouped with the same master zone. When lights in a master zone are ON, lights in a comfort zone remain ON at a reduced level. Comfort zones are created through the ENCELIUM Polaris 3D software.

Photo Sensors

— Utilizing networked photo sensors, the Energy Control Unit reduces artificial light levels when natural daylight is available and maintains a steady light level when subjected to fluctuating daylight conditions where 0-10V dimming ballasts and/or drivers exist. Areas with fixed output ballasts and/or drivers energize when natural daylight falls below the foot-candle levels specified.

— The ENCELIUM system utilizes light level inputs from common and/or remote sensor locations to minimize the number of photo sensors required. If the office is part of a multi-floor building, then the weighted value of photo sensor readings (the floors just above and just below the office location) is considered to control lighting in order to economize the sensor usage.

— Light level sensor parameters are configurable through the ENCELIUM Polaris 3D software. Photo sensors should be placed in areas where their line-of-sight is not blocked by furniture or decoration.

With the ENCELIUM EMS, a comfort zone supports one or more

master zones. Luminaires are grouped into zones as appropriate

and customized to optimize energy savings.

Sensor Integration & Comfort ZonesThe ENCELIUM® EMS uses occupancy/vacancy sensors, photo sensors, and comfort zones

to integrate entire floors and achieve a massive reduction in lighting energy consumption.

Master Zone

Master ZoneComfort Zone

Office | Private Office

12

Private OfficeThe ENCELIUM® Energy Management System helps

reduce lighting energy consumption while providing the

flexibility to adjust light levels for a wide range of tasks

and personal preferences.

Features — Occupants can recall customizable preset lighting scenes in their workspace from their personal computers using the ENCELIUM Personal Control Software

— Networked photo sensors enable the ENCELIUM EMS to adjust artificial light based on the availability of natural daylight

— Private offices have “comfort zones” assigned to them that remain ON when offices are occupied after regular business hours

Office

Wireless network

The Wireless Control Module (WCM) enables each

luminaire to be independently controlled and configured

through the ENCELIUM Polaris 3D software

ENCELIUM Hardware Components Shown:

ENCELIUM GreenBus II® Cable


Occupancy Sensor

Wireless Control Wireless Sensor


Recommended ENCELIUM Software:

ENCELIUM Polaris 3D® CarbonWatch

Office | Open Office

13

Wireless network

The Wireless Control Module (WCM) enables each

luminaire to be independently controlled and configured

through the ENCELIUM Polaris 3D software


Open OfficeThe ENCELIUM® Energy Management System reduces lighting energy consumption

in areas where multiple employees work, each with differing lighting preferences.

Features — Group luminaires into zones through the ENCELIUM Polaris 3D® software and control zones with the Three-Zone Wallstation

— Send occupancy information from the ENCELIUM EMS to Building Management Systems (HVAC, fire, security) with the BACnet Interface Module

— With the ENCELIUM EMS, lighting is scalable to accommodate future changes or upgrades as your office space changes


Luminaire Control Module (LCM)


Occupancy Sensor


ENCELIUM Polaris 3D® BACnet Interface Module Personal Control Software

3 Scene 3 Zone

Luminaire Controle Module

Sensor Interface Module

Multi Tech Occupancy Sensor

Area Lighting controller

Touch Screen

GreenBus II network

The Luminaire Control Module (LCM) enables each luminaire to be

independently controlled and configured through the ENCELIUM

Polaris 3D software


Office | Conference Rooms

14





Occupancy Sensor

Three-Scene Wallstation

ENCELIUM Polaris 3D® BACnet Interface Module


Conference RoomsThe ENCELIUM® Energy Management System reduces lighting

energy consumption while providing a wide customizable array

of lighting configurations and levels to suit a variety of tasks.

Features — Tailor light levels and configurations to best suit the use of the space: – Presentation – Meeting – Video Conferencing – Projected Presentation

— Recall customizable preset lighting scenes with the Three-Scene Wallstation


GreenBus II network



Polaris 3D software

3 Scene 3 Zone





Touch Screen

Office | Lobby/Reception Area

15

Lobby/Reception AreaThe ENCELIUM® Energy Management System reduces lighting

energy consumption while ensuring the comfort of all office visitors.

Features

— Switch light levels ON/OFF with the Two Button Wallstation or “press and hold” to dim light levels up or down

— Set time schedules for light levels through the ENCELIUM Polaris 3D® software

— Showcase your energy savings and carbon footprint reduction with ENCELIUM CarbonWatch






Wireless Control Module (WCM)


ENCELIUM Polaris 3D® CarbonWatch

CarbonWatch

GreenBus II network The Area Lighting Controller (ALC) enables group control of luminaires where individual control is not necessary

Wireless network The Wireless Area Lighting Controller (WALC) enables group control of luminaires where individual control is not necessary

CarbonWatch3 Scene 3 Zone





Touch Screen

3 Scene 3 Zone





Touch Screen

3 Scene 3 Zone





Touch Screen

CarbonWatch


16



Area Lighting Controller (ALC)


Occupancy Sensor Two Button Wallstation


ENCELIUM Polaris 3D®

3 Scene 3 Zone





Touch Screen

Break RoomThe ENCELIUM® Energy Management System reduces lighting energy consumption

in areas that are used intermittently.

Features

— Networked occupancy sensors enable the ENCELIUM EMS to ensure lights remain ON/OFF or dimmed based on occupancy

— Set maximum level of brightness for luminaires in the space with ENCELIUM Polaris 3D® software

— Switch light levels ON/OFF with the Two Button Wallstation or “press and hold” to dim light levels up or down

GreenBus II network

The Area Lighting Controller (ALC) enables

group control of luminaires where individual

control is not necessary

Office | Break Room

3 Scene 3 Zone





Touch Screen

17



Storage/WarehouseThe ENCELIUM® Energy Management System reduces

lighting energy consumption while still providing the right

amount of light required to work safely.

Features

— Networked occupancy sensors enable the ENCELIUM EMS to switch between two light levels based on occupancy

— Manually turn lights ON/OFF with the rugged stainless steel housing of the Industrial Push Button Wallstation or with the Two Button Wallstation

— Designate areas for load shedding to shave electrical demand during peak hours with the ENCELIUM Polaris 3D® software


Dual Relay Luminaire Control Module

Occupany Sensor






GreenBus II network

The Dual Relay Luminaire Control Module enables each luminaire

to be independently controlled and configured through the software

Wireless network

The Wireless Control Module (WCM) enables each luminaire

to be independently controlled and configured through the software

Office | Storage/Warehouse

3 Scene 3 Zone





Touch Screen

Healthcare | Patient Room

18

Patient RoomThe ENCELIUM® Energy Management System reduces lighting

energy consumption in areas that are operational 24 hours a day

while individual patients recover on unique schedules.

Features

— Give patients the option to adjust light levels to suit their needs by linking patient call button systems with lighting


— Set time schedules for light levels based on natural circadian rhythms with ENCELIUM Polaris 3D® software




Occupancy Sensor

Photo Sensor


3 Scene 3 Zone





Touch Screen

GreenBus II network

The Luminaire Control Module (LCM) enables

each luminaire to be independently controlled

and configured through the ENCELIUM Polaris

3D software

Healthcare




Healthcare | Nurses Station

19

Nurses StationThe ENCELIUM® Energy Management System gives nurses localized

control of hospital lighting from their personal workspaces.

Features

— Maintain local manual control of lighting in hospital wing for patient management and handling of medicine with the Three-Zone Wallstation

— Tailor light levels based on personal preference from work station computer with ENCELIUM Personal Control Software

— Set time schedules for light levels based on visiting hours and quiet times with the ENCELIUM Polaris 3D® software




GreenBus II network

The Luminaire Control Module (LCM) enables each luminaire

to be independently controlled and configured through the

ENCELIUM Polaris 3D software



ENCELIUM Polaris 3D® Personal Control Software (PCS)

3 Scene 3 Zone





Touch Screen

Healthcare | Waiting Room

20

CarbonWatch

Waiting RoomThe ENCELIUM® Energy Management System reduces lighting energy

consumption while ensuring the comfort of all hospital visitors.

Features

— Create lighting scenes by lowering light to reduce stress levels with the ENCELIUM Polaris 3D® software

— Load shed to shave electrical demand during peak hours — Showcase your energy savings and carbon footprint reduction with ENCELIUM CarbonWatch

GreenBus II network


independently controlled and configured through the software



Touch Screen Panel Wireless Control Module (WCM)



ENCELIUM Polaris 3D® CarbonWatch AV Interface

CarbonWatch

To Ethernet Switch

PoE

Wireless network

The Wireless Control Module (WCM) enables each luminaire to be


CarbonWatch

Healthcare | Laboratory

21

LaboratoryThe ENCELIUM® Energy Management System reduces lighting energy consumption while

providing a wide array of lighting configurations and light levels to suit a variety of tasks.

Features



— Different zones are easily established and updated through the ENCELIUM Polaris 3D® software to reduce light levels in favor of energy savings where luminance requirements are variable

GreenBus II network







Occupancy Sensor


3 Scene 3 Zone





Touch Screen




22

Healthcare | Surgical Suite





Touch Screen Panel



3 Scene 3 Zone





Touch Screen

Surgical SuiteThe ENCELIUM® Energy Management System reduces lighting

energy consumption while providing control of ambient lighting

for optimal viewing of the surgical field.

Features

— Using the ENCELIUM Touch Screen Panel, focus attention to certain areas by recalling customizable preset lighting scenes: – Prep/Set-Up – Procedures – Post-Op Cleaning

— Integrate audio-visual systems into the ENCELIUM EMS for access to music or video conferencing

— With the ENCELIUM EMS, lighting is scalable to accommodate future changes or upgrades

GreenBus II network

The Luminaire Control Module (LCM) and Area Lighting Controller (ALC)

enables each luminaire or group of luminaires to be independently

controlled and configured through the ENCELIUM Polaris 3D software

Education | Classroom

23

3 Scene 3 Zone





Touch Screen



Occupancy Sensor

Photo Sensor






ENCELIUM Polaris 3D® Personal Control Software (PCS)

ClassroomThe ENCELIUM® Energy Management System enables the easy selection

of lighting scenes to direct student attention and create a stimulating

learning environment.

Features

— Teachers can easily recall customizable preset lighting scenes for common activities to create an engaging learning environment from their classroom computer using ENCELIUM Personal Control Software



Education

3 Scene 3 Zone





Touch Screen

3 Scene 3 Zone





Touch Screen


Education | Laboratory

24

LaboratoryThe ENCELIUM® Energy Management System reduces lighting

energy consumption while providing a wide array of lighting

schemes and light levels to suit a variety of tasks.

Features


— Lighting zones can be established through the ENCELIUM Polaris 3D® software to illuminate areas differently to suit the needs of students and staff

— Adjust light levels as needed for testing and examinations with the ENCELIUM Three-Scene Wallstation

GreenBus II network






Occupancy Sensor


3 Scene 3 Zone





Touch Screen




25

AuditoriumThe ENCELIUM® Energy Management System enables the easy

selection of lighting scenes to direct focus and attention while

simultaneously reducing lighting energy consumption.

Features

— Recall customizable preset lighting scenes to best focus student attention for the current activity using the ENCELIUM Touch Screen Panel



GreenBus II network

The Luminaire Control Module (LCM) enables each luminaire to be independently

controlled and configured through the ENCELIUM Polaris 3D software

Education | Auditorium




Occupancy Sensor

Touch Screen Panel



ENCELIUM Polaris 3D® BACnet Interface Module AV Interface

Education | Dining Hall

26




Photo Sensor




3 Scene 3 Zone





Touch Screen



Dining HallThe ENCELIUM® Energy Management System allows you to set an array of lighting scenes

to suit the time of day while still ensuring the comfort of student and staff diners.

Features

— Set time schedules for light levels through the ENCELIUM Polaris 3D® software


— Group luminaires into zones through the ENCELIUM Polaris 3D software to set desired light levels

GreenBus II network



Polaris 3D software

3 Scene 3 Zone





Touch Screen

Education | Library

27


Photo Sensor





LibraryThe ENCELIUM® Energy Management System maximizes energy savings

in a building or space with extended hours and sporadic occupancy while

maintaining a safe and secure environment for students and faculty.

Features


— Appeal to different personal preferences and study habits by creating areas with different illumination levels through the ENCELIUM Polaris 3D® software

— Create “secure zones” for spaces such as restrooms, lounge areas and exits to ensure student and faculty safety at night

Wireless network

The Wireless Control Module (WCM) enables each luminaire to be


Polaris 3D software

3 Zone

Education | Gymnasium

28




Occupancy Sensor





GymnasiumThe ENCELIUM® Energy Management System reduces lighting energy

consumption while setting light configurations as needed for specific activities.

Features


— Eliminate glare and uneven illumination by setting maximum light levels through the ENCELIUM Polaris 3D® software

— Group luminaires into zones through the ENCELIUM Polaris 3D software and control zones with the Three-Zone Wallstation

GreenBus II network




3 Scene 3 Zone





Touch Screen

Common Areas | Rest Room

29






Occupancy Sensor


3 Scene 3 Zone





Touch Screen

Rest RoomThe ENCELIUM® Energy Management System ensures that lights

are only ON when occupancy is detected.

Features


— Send occupancy information from the ENCELIUM EMS to Building Management Systems (HVAC, fire, security) with the BACnet Interface Module to operate bathroom fan

— Load shed in pre-determined areas to shave electrical demand during peak hours with the ENCELIUM Polaris 3D® software

Common Areas

GreenBus II network

The Area Lighting Controller (ALC) enables group control of luminaires

where individual control is not necessary

Common Areas | Corridor

30








CorridorThe ENCELIUM® Energy Management System will reduce lighting energy

consumption while ensuring the safety and security of all building occupants.

Features

— With the ENCELIUM Polaris 3D® software, designate hallways as “comfort zones” in relation to offices and main areas so lighting remains ON as long as occupancy is detected in master zones for both comfort and safety

— Set time schedules for light levels through the ENCELIUM Polaris 3D software

— Load shed in pre-determined areas to shave electrical demand during peak hours with ENCELIUM Polaris 3D software

3 Scene 3 Zone





Touch Screen

3 Zone


Wireless network The Wireless Area Lighting Controller (WALC) enables group control of luminaires where individual control is not necessary

3 Scene 3 Zone





Touch Screen

3 Scene 3 Zone





Touch Screen


Common Areas | Storage Room

31






Occupancy Sensor



3 Scene 3 Zone





Touch Screen

Storage RoomThe ENCELIUM® Energy Management System ensures that lights

are only ON when occupancy is detected.

Features


— Manually turn lights ON/OFF with the rugged stainless steel housing of the Industrial Push Button Wallstation

— Load shed in pre-determined areas to shave electrical demand during peak hours with the ENCELIUM Polaris 3D® software

GreenBus II network

The Area Lighting Controller (ALC) enables group control of luminaires

where individual control is not necessary

OSRAM and Logo are registered trademarks of OSRAM GmbH.ENCELIUM, GreenBus II and Polaris 3D are registered trademarks of OSRAM SYLVANIA Inc. BACnet is a registered trademark of ASHRAE.All other trademarks are the property of their respective owners.

www.encelium.com

© 2016 OSRAM

LMS095R2 4-16

Americas Headquarters

200 Ballardvale Street

Wilmington, MA 01887 USA

Phone 1-888-531-7573

www.encelium.com

light is osram€¦ · application and design guide light is osram ... features & benefits ......

Documents