lg tv manual

7/16/2019 LG TV Manual

1/118

LCD TV PLASMA TV

OWNERS MANUAL

LCD TV MODELS

22/26LG1***32/37LG1***42/47LG1***22/26LG3***32/37LG3***42/47LG3***32LG5***

37/42LG5***47/52LG5***

PLASMA TV MODELS

32PC5***

42PG1***50PG1***42PG2***50PG2***

Please read this manual carefully before operating your set.Retain it for future reference.Record model number and serial number of the set.Refer to the label on the back cover and quote thisinformation.To your dealer when requiring service.


2/118

Ferrite core can be used to reduce the electromagneticwave when connecting the power cord.The closer the location of the ferrite core to the powerplug, the better it is.

Use of ferrite core (This feature is not available for all models.)

Install the power plug closely.


3/118


4/118

Watching PIP(Picture-in-Picture) .............................63

Picture Size (Aspect Ratio)Control.........................64

Preset Picture Settings

- Picture Mode-Preset............................................66

- Auto Colour Tone Control(Cool/Medium/Warm)67

Manual Picture Adjustment

- Picture Mode-User Option................................68

- Colour Tone - User Option...............................69

- Picture Improvement Technology ...................70Advanced - Gamma......................................................71

Advanced - Film Mode ................................................72

Advanced - Black(Darkness) Level...........................73

Advanced - Eye Care ...................................................74

Picture Reset..................................................................75

Image Sticking Minimization(ISM) Method...........76

Power Saving Picture Mode .......................................77

Power Indicator..............................................................77

Factory Reset .................................................................78

Remote Control Key Functions..................................40

Turning on the TV....................................................... 48

Programme Selection................................................. 48

Volume Adjustment......................................................48

Quick Menu .................................................................. 49

On Screen Menus Selection and Adjustment......50

PICTURE CONTROL

WATCHING TV / PROGRAMME CONTROL

ACCESSORIES .....................................................1

2

CONTENTS

C

ONTENTS

PREPARATION

Front Panel Controls.................................. ................. 4

Back Panel Information .............................................. 7

Stand Installation....... ..................... ..................... .......11Please set it up carefully so the productdoes not fall over. . . . . . . . . . . . . . . . . . . . . . . . . .13

Back Cover for Wire Arrangement.................... ..... 14

Swivel Stand .................. ..................... ..................... ... 17

Positioning your display........ ...................... ..............17

Location........................................................................17Kensington Security System ..................... ..............17

Desktop Pedestal Installation .................... ............. 18

Wall Mount: Horizontal installation....................... 18

Not using the desk-type stand................................19

Antenna Connection.... ..................... ...................... . 20

PREPARATION

EXTERNAL EQUIPMENT SETUP

HD Receiver Setup .......................................................21

DVD Setup .................................................................... 24

VCR Setup..................................................................... 27

Headphone SETUP ......................................................30

Other A/V Source Setup........................................... 31

External Stereo Setup..................................................32

AV Output Setup ........................................................ 32

PC Setup.........................................................................33

- Screen Setup for PC Mode ...............................36

Auto Programme Tuning ............................................ 51

Manual Programme Tuning ....................................... 52

Fine Tuning .....................................................................53

Assigning a Station Name..........................................54Booster............................................................................55

Programme Edit ........................................................... 56

Favourite Programme .................................................. 57

Selecting the Programme List .................................. 58

.................................................................. 59

Key lock.......................................................................... 61

AV Mode.........................................................................62


5/118

SOUND & LANGUAGE CONTROL

Auto Volume Leveler....................................................79

Preset Sound Settings - Sound Mode....................80Sound Setting Adjustment - User Mode................81

Balance ............................................................................82

TV Speakers On/Off Setup .......................................83

Selecting Audio Out....................................................84

I/II

- Stereo/Dual Reception....................................... 85

- NICAM Reception ....................................................... 86

- Speaker Sound Output Selection.................... 86

On-Screen Menu Language Selection ...................... 87

3

C

ONTENTS

APPENDIX

Troubleshooting............................................................95

Maintenance .................................................................97Product Specifications................................................98

Programming the Remote Control ...................... 102

IR Codes ..................................................................... 104

External Control Through RS-232C ................... 107

TIME SETTING

Clock Setup .....................................................................88

Auto On/Off Timer Setting.........................................89

Sleep Timer Setting .......................................................90

Auto Shut-off Setting...................................................91

TELETEXT

Switch On/Off .............................................................92

SIMPLE Text ...................................................................92

TOP Text .........................................................................93

FASTEXT.........................................................................93

Special Teletext Functions..........................................94


6/118

4

FRONT PANEL CONTROLS

PREPARATION

PREPARATION

I This is a simplified representation of the front panel. Image shown may differ from your TV.I If your product has a protection film attached, remove the film and then wipe the product with a polishing

cloth.

PLASMA TV Models: 42/50PG1***

PROGRAMMEVOLUMEMENU OKINPUT

MENU OKINPUTPOWER

P+KENUNPUT

P+K

P+KENUNPUT

VOLUME PROGRAMME

Remote Control Sensor

Remote Control SensorPower/Standby Indicator

illuminates red in standby mode.

illuminates green when the TV isswitched on.

POWER

Power/Standby Indicator


illuminates green when the TV isswitched on.

P+OKKMENUENUINPUTNPUT

P+OKKMENUENUINPUTNPUT

PLASMA TV Models: 42/50PG2***


7/118

5

PREPARATION

PLASMA TV Models: 32PC5***

PROLKENUNPUT



illuminates green when the TV is switched on.

Remote ControlSensor

PROLKENUNPUT

INPUT MENU OK VOLUME PROGRAMMEPOWER

PROLKENUNPUT


8/118

6

PREPARATION

PREPARATION

Intelligent SensorAdjusts picture according to the surrounding

conditions (Only 32/37/42/47/52LG5***)

POWERRemote Control Sensor



illuminates blue when the TV is switched on.

Note: You can adjust Power Indicatorinthe OPTION menu.

P

MENU

INPUT

OK

+

-

PROGRAMME

VOLUME

OK

MENU

INPUT

INPUT MENU PRVOLOK

PROGRAMMEVOLUMEMENU OKINPUT

LCD TV Models : 22LG1***, 22LG3***

LCD TV Models : 26/32/37/42/47LG1***,26/32/37/42/47LG3***, 32/37/42/47/52LG5***

POWER

Remote Control Sensor

Power/Standby Indicator illuminates red in standby mode.

illuminates blue when the TV is switched on.


9/118

7

PREPARATION

AUDIOAV VIDEO

VARIABLE AUDIO OUT

BACK PANEL INFORMATIONA Image shown may differ from your TV.

PLASMA TV Models

AUDIOAV VIDEO

VARIABLE AUDIO OUT

1

HDMI INHDMI/DVI IN

1 2

1

2

AUDIO(RGB/DVI)

RGB(PC)

RGBI

N

COMPONENT INANTENNA

IN

RS-232C IN(CONTROL)

VIDEO AUDIOL(MONO) RAUDIOUDIOAV VIDEOIDEOIN 1

OUT

VARIABLE AUDIO OUTARIABLE AUDIO OUT

S-Video InputConnect S-Video out froman S-VIDEO device.

Audio/Video InputConnect audio/video out-

put from an externaldevice to these jacks.

2

65 7 8

3 4

Power Cord Socket

This TV operates on an AC power. The voltage isindicated on the Specifications page. Neverattempt to operate the TV on DC power.

HDMI Input

Connect a HDMI signal to HDMI IN.Or DVI(VIDEO)signal to HDMI/DVI port with DVIto HDMI cable.

RGB/Audio Input

Connect the monitor output from a PC to theappropriate input port.

RS-232C Input (CONTROL) PortConnect the serial port of the control devices tothe RS-232C jack.(This feature is not available for all models.)

Audio/Video Input (AV IN 1)

Connect audio/video output from an externaldevice to these jacks.

AV OutputConnect second TV or monitor to the AV OUTsocket on the TV.Variable Audio Output

Connect an external amplifier or add a subwooferto your surround sound system.

Component Input

Connect a component video/audio device tothese jacks.

Antenna Input

Connect RF antenna to this jack.

1

2

3

4

5

6

7

8


10/118

8

PREPARATION

PREPARATION

VIDEO AUDIOCOMPONENT IN

HDMI INDMI/DVI IN1 2

RGB IN (PC)

1

2

VARIABLEOUT

AUD(RGBVIDEO AUDIOCOMPONENT IN


RGB IN (PC)

ANTENNAIN

1

2

RS-232C IN(CONTROL & SERVICE) AUDIO IN(RGB/DVI) AV OUT AV IN

LMONO

RADIO

VIA

ADIOOUT

VDE

8

Component Input


RS-232C Input (CONTROL&SERVICE) Port

Connect the serial port of the control devices tothe RS-232C jack.

AV Output

Connect second TV or monitor to the AV OUTsocket on the TV.

Variable Audio Output

Connect an external amplifier or add a subwooferto your surround sound system.

Audio/Video Input (AV IN)


HDMI Input

Connect a HDMI signal to HDMI IN.

Or DVI(VIDEO)signal to HDMI/DVI port with DVIto HDMI cable.

RGB/Audio Input

Connect the monitor output from a PC to the

appropriate input port.

Antenna Input

Connect RF antenna (UHF) to this jack.

Power Cord Socket


1

2

3

4

5

6

8

7

VIDEOCOMPO

DMI/DVI IN1

1

2VIDEO AUDIOCOMPONENTOMPONENT ININ


RGB IN (PC)GB IN (PC)

ANTENNAIN

1

2

RS-232C INS-232C IN(CONTROLCONTROL & SER& SERVICE)ICE) AUDIO INUDIO IN(RGB/DVI)RGB/DVI) AV OUT AV IN

LMONO

MONO

RAUDIO

ADIO

VARIABLEAUDIO

OUT

VIA

ADIOOUT

VIDEO

VDE

1 2 3 4

5 76

Only 32PC5***



11/118

9

PREPARATION

LCD TV Models

1

HDMI INDMI/DVI IN1

1

2

2

RGBN

COMPONENT IN

AUDIOAV

VIDEO

VARIABLEAUDIO OUT

3

S-Video InputConnect S-Video out froman S-VIDEO device.

Audio/Video Input

Connect audio/video out-put from an externaldevice to these jacks.

HDMI InputConnect a HDMI signal toHDMI IN. (This feature isnot available for all models.)

HDMI INDMI INHDMI/DVI INDMI/DVI IN1

1

2

2

AUDIORGB(PC)

RGBI

N

RGBN

COMPONENT INOMPONENT INAUDIOVIDEO

L(MONO) RAUDIOUDIO

ANTENNAIN

(RGB/DVI)

AVVIDEOIDEO

IN 1

OUT

VARIABLEARIABLEAUDIO OUTUDIO OUT

RS-232C IN(CONTROL)

3 42

75

Power Cord Socket


HDMI Input


RGB/Audio Input


RS-232C Input (CONTROL) Port

Connect the serial port of the control devices tothe RS-232C jack.(This feature is not available for all models.)

Audio/Video Input (AV IN 1)


AV OutputConnect second TV or monitor to the AV OUTsocket on the TV.Variable Audio OutputConnect an external amplifier or add a subwooferto your surround sound system.

Component Input


Antenna Input


1

2

3

4

5

6

7

8

6 8


12/118

10

PREPARATION

PREPARATION

Only 22LG1***, 22LG3***

1

RGB (PC) IN

S-VIDEO

AV IN

VIDEO

L R

AUDIO

Y PB PR L R

VIDEO

COMPONENT INAUDIO

HDMI/DVI INAUDIO

(RGB/DVI) IN

H/P

ANTENNA IN

RS-232C IN(CONTROL&SERVICE)

Power Cord Socket


HDMI Input


RGB/Audio Input


Antenna Input


RS-232C Input (CONTROL&SERVICE) Port

Connect the serial port of the control devices tothe RS-232C jack.

Audio/Video Input


Component Input


S-Video Input

Connect S-Video out from an S-VIDEO device.

Headphone Input

1

2

3

4

5

6

7

8

9

2

6

43

5 7 8 9



13/118

11

PREPARATION

I Image shown may differ from your TVI When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, thep

roduct can tilt forward after the product installation.) If you tighten the bolt with excessive force, the boltcandeviate from abrasion of the tightening part of the bolt.

1 3

4

Carefully place the TV screen side down on acushioned surface to protect the screen fromdamage.

2 Assemble the parts of the Stand Body withthe Cover Base of the TV.

Assemble the TV as shown.

Fix the 4 bolts securely using the holes in theback of the TV.

STAND INSTALLATIONLCD TV Models: 26/32/37/42LG1***, 26/32/37/42LG3***, 32/37/42LG5***

(Only 22LG3***)

Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.

Assemble the parts of the STAND BODY with COVER BASE of the TV. Insert the STAND BODY into aCOVER BASE until clicking sound.


1

2

3

Stand Body

Cover Base


14/118

12

PREPARATION

PREPARATION

STAND INSTALLATIONPLASMA TV Models (Only 42PG1***, 42PG2***, 32PC5***)

I Image shown may differ from your TVI When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, thep

roduct can tilt forward after the product installation.) If you tighten the bolt with excessive force, the boltcandeviate from abrasion of the tightening part of the bolt.

Carefully place the TV screen sidedown on a cushioned surface toprotect the screen from damage.


Fix the 4 bolts securely usingthe holes in the back of the TV.

1

2

3

Attaching the TV to a desk (Only 26/32/42LG1***, 26/32/37/42LG3***, 32/37/42LG5***)

The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causinginjury or damaging the product. Use only an attached screw.

1-Screw(provided as parts of the product)

Desk

Stand

WARNING!G To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation

instructions. Tipping, shaking, or rocking the machine may cause injury.

Only 32PC5***


15/118

13

PREPARATION

PLEASE SET IT UP CAREFULLY SO THE PRODUCT DOES NOTFALL OVER.

A You should purchase necessary components to fix the TV to the wall on the market.A Position the TV close to the wall to avoid the possibility of it falling when pushed.A The instructions shown below are a safer way to set up the TV, which is to fix it to the wall, avoiding the

possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury.This will also prevent the TV from damage. Ensure that children do not climb or hang from the TV.

NOTE!

G When moving the TV undo the cords first.

G Use a platform or cabinet string and large enough to support the size and weight of the TV.

G To use the TV safely make sure that the height of the bracket on the wall and on the TV is the same.

3

1

2

Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture.

(If your TV has bolts in the eyebolts, loosen then bolts.)

* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.

Secure the wall brackets with bolts to the wall.

Ensure that both brackets are even.

3 Use a strong cord to secure the TV.Secure the cord in such a way that it becomes taught when the TV is in position.

2

1

2

1


16/118

14

PREPARATION

PREPARATION

BACK COVER FOR WIRE ARRANGEMENTI Here shown may be somewhat different from your TV.

PLASMA TV Models

Connect the cables as necessary.

To connect additional equipment, see theExternal Equipment Setup section.

1

Install the CABLE MANAGEMENT CLIP as shown.2 Install the CABLE MANAGEMENT CLIP as shown.2

Hold the CABLE MANAGEMENT CLIP with both hands and pull it upward.

NOTE!

G Do not use the CABLE MANAGEMENT CLIP to lift the TV.

- If the TV is dropped, you may be injured or the TV may be damaged.

How to remove the cable management clip

CABLE MANAGEMENT CLIP

* For the 42PG1*** model, press the center of the CABLE MANAGEMENT CLIP and then lift up it.

Fix the CableHolderas shown andbundle the cables.


To connect additional equipment, see theExternal Equipment Setup section.

1

42/50PG2***42/50PG1***


Fix the Cable Holdershown and bundle thecables.


17/118

15

PREPARATION

Only 32PC5***

LCD TV Models


To connect additional equipment, see theExternal Equipment Setup section of themanual.

1

Open the CABLE MANAGEMENT CLIP asshown and manage the cables.

2


Fit the CABLE MANAGEMENT CLIP as

shown.3

NOTE!



Arrange the cables as shown picture.


18/118

16

PREPARATION

PREPARATION

PREPARATION

BACK COVER FOR WIRE ARRANGEMENT

Only 22LG3***


To connect additional equipment, see the External Equipment Setup section of the manual.

1

Install the CABLE MANAGEMENT CLIP as shown.2


NOTE!



How to remove the CABLE MANAGEMENT CLIP

G Hold the CABLE MANAGEMENT CLIP with bothhands and pull it backward.

POWER CORD ARRANGEMENT (Only 32PC5***)

After connecting the power cord to the AC inputterminal, fix the power cord at the rear side Hole ofthe TV by using the bracket for fixing the powercord.


19/118

17

PREPARATION

SWIVEL STANDThis feature is not available for all models.

After installing the TV, you can adjust the TV manuallyto the left or right direction by 20 degrees to suit yourviewing position.

POSITIONING YOURDISPLAY (Only 22LG1***,22LG3***)

I Image shown may differ from your TV.I Adjust the position of the panel in various ways for

maximum comfort.

Tilt range

12 1.5 3 1.5

LOCATION(Only 22LG1***, 22LG3***)Position your TV so that no bright light or sunlight falls directly onto the screen. Care should be taken not toexpose the tv to any unnecessary vibration, moisture, dust or heat. Also ensure that the TV is placed in a positionto allow a free flow of air. Do not cover the ventilation openings on the back cover.If you intend to mount the TV to a wall, attach VESA standard mounting interface (optional parts) to the back ofthe TV.When you install the TV to use the wall mounting bracket (optional parts), fix it carefully so as not to drop.

KENSINGTON SECURITY SYSTEM (Only 22LG1***, 22LG3***)The TV is equipped with a Kensington Security System connector on the back panel. Connect the KensingtonSecurity System cable as shown below.For the detailed installation and use of the Kensington Security System, refer to the users guide provided withthe Kensington Security System.For further information, contact http://www.kensington.com, the internet homepage of the Kensingtoncompany. Kensington sells security systems for expensive electronic equipment such as notebook PCs and LCDprojectors.

NOTE

- The Kensington Security System is an optional accessory.

NOTESa. If the TV feels cold to the touch, there may be a small flickerwhen when it is turned on.This is normal, there is nothing wrong with TV.

b. Some minute dot defects may be visible on the screen, appear-ing as tiny red, green, or blue spots. However, they have noadverse effect on the monitor's performance.

c. Avoid touching the LCD screen or holding your finger(s)against it for long periods of time.Doing so may produce some temporary distortion effects onthe screen.


20/118

18

PREPARATION

PREPARATION

PREPARATION

I The TV can be installed in various ways such as on a wall, or on a desktop etc.

I The TV is designed to be mounted horizontally.

DESKTOP PEDESTAL INSTALLATIONFor adequate ventilation allow a clearance of 4 (10cm) all around the TV .

4 inches

4 inches

4 inches4 inches

Power Supply

Circuit breaker

EARTHINGEnsure that you connect the earth wire to prevent possible electric shock. If grounding methods are notpossible, have a qualified electrician install a separate circuit breaker.

Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes.

4 inches

4 inches

4 inches

4 inches

4 inches

WALL MOUNT: HORIZONTAL INSTALLATIONFor adequate ventilation allow a clearance of 4 (10cm) all around the TV. We recommend that you use a wallmounting bracket of LG brand when mounting the TV to a wall.


21/118

19

PREPARATION

When installing the wall-mounted unit, use the protection cover for desk-type stand installation.

NOT USING THE DESK-TYPE STAND

Plasma TV Models

LCD TV Model

or

or

Only 22LG3***

Loose the bolts from TV.1 Bend the HINGE BODY and pull it backward.2

Insert the PROTECTION COVER intothe TV.3

Fix the 4 bolts securely using the holes inthe back of the TV.4

PROTECTION COVER

HINGE BODY

Insert the PROTECTION COVER into the TVuntil clicking sound.


22/118

HDMI INDMI/DVI IN1

1

2

2

RGBN

COMPONENT IN

AUDIO

ANTENNAIN

AVVIDEO

VARIABLEAUDIO OUT

20

PREPARATION

PREPARATION

PREPARATION

ANTENNA CONNECTION

I For optimum picture quality, adjustantenna direction.

I An antenna cable and converter arenot supplied.

I To prevent damage do not connect to the mains outlet until all connections are made between the devices.

HDMI INDMI/DVI IN1

1

2

2

RGBN

COMPONENT IN

AUDIO

ANTENNAIN

AVVIDEO

VARIABLEAUDIO OUT

Multi-family Dwellings/Apartments(Connect to wall antenna socket)

Single-family Dwellings /Houses(Connect to wall jack for outdoor antenna)

OutdoorAntenna

WallAntenna

Socket

RF Coaxial Wire (75 ohm)

Antenna

UHF

Signal

Amplifier

VHF

I In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to theantenna as shown above.

I If signal needs to be split for two TVs,use an antenna signal splitter for connection.

AV 1 AV 2

ANTENNAIN

AV 1 AV 2

ANTENNAIN



R GB N P C

ANTENNAIN

1

2

VARIABLEOUT

AUDIO IN(RGB/DVI) AV OUT AV IN

LMONO

RADIO

VE



R GB N P C

ANTENNAIN

1

2

RS-232C IN(CONTROL & SERVICE) AUDIO IN(RGB/DVI) AV OUT AV IN

LMONO

RADIO

VI

DIUT

VE


23/118

21

EXTERNALEQUIPMENTSETUP

EXTERNAL EQUIPMENT SETUPI To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment.

I This section on EXTERNAL EQUIPMENT SETUP mainly uses diagrams for the PLASMA TV models.

I Image shown may differ from your TV.

L/MONO RUDIOIDEO

VARIABLE AUDIO OUT

HDMI INDMI DVI INDMI/DVI IN1

HDMI INDMI DVI IN HDMI INDMI/DVI IN1 2

1

2

COMPONENT IN

VIDEO AUDIO

1 2

HD RECEIVER SETUPConnecting with a component cable

Connect the video outputs (Y, PB, PR) of the digital TV

top box to the COMPONENT IN VIDEOjacks on the TV.

Connect the audio output of the digital set-top box to

the COMPONENT IN AUDIOjacks on the TV.

Turn on the digital set-top box.

(Refer to the owners manual for the digital set-top box.)

Select Component1 input source using the INPUT button on the remote control.

If connected to COMPONENT IN2, select Component2 input source(Except 22LG3***).

2

3

4

1

Signal

480i/576i

480p/576p

720p/1080i

1080p

Component

Yes

Yes

Yes

Yes

(Only 50Hz, 60Hz)

HDMI1/DVI, HDMI2(Except 22LG3***),HDMI3(Only 32/37/42/47/52LG5***)

No

Yes

Yes

Yes

(24Hz, 30Hz, 50Hz, 60Hz)(22LG3***- Only 50Hz, 60Hz)

Y PB PR L R

VIDEO

COMPONENT INAUDIO

1 2

Only 22LG3***

VIDEOIDEO AUDIOUDIOCOMPONENT IN

1 2RGGB IN (PC)

1

2

RS-232C IN(CONTCONTROL&SERVICE) AUDIO IN(RGB/DVI)

HDMI INDMI/DVI IN

1 2

Only 32PC5***


24/118

L//MONOONO RAUDIOUDIOVIDEOIDEOAV

IN 1

OUT

VARIABLERIABLE AUDIO OUTUDIO OUT

HDMI INDMI DVI IN HDMI INDMI INHDMI/DVI INDMI/DVI IN1 2

1

22



Connecting a set-top box with a HDMI cable

Connect the HDMI output of the digital set-top box to theHDMI/DVI IN 1, HDMI IN 2(Except 22LG3***) orHDMI IN 3(Only 32/37/42/47/52LG5***) jack on the TV.

Select HDMI1/DVI , HDMI2(Except 22LG3***) orHDMI3 (Only 32/37/42/47/52LG5***) input sourceusing the INPUT button on the remote control.

Turn on the digital set-top box.

(Refer to the owners manual for the digital set-top box.)

2

3

1

G TV can receive the video and audio signal simultaneously with using a HDMI cable.

G If the digital set-top box supports Auto HDMI function, the output resolution of the source device will beautomatically TV to 1280x720p.

G If the digital set-top box player does not support Auto HDMI, you need to TV the output resolutionappropriately. To get the best picture quality, adjust the output resolution of the source device to

1280x720p (42LG31F**, 32/37/42/47/52LG5***: 1920x1080i/1080p).

NOTE!

HDMI/DVI IN RGB(PC) IN

1

Only 22LG3***


1 2RGB IN (PC)

1

2

RS-232C IN(CONTROL&SERVICE) AUDIO IN(RGB/DVI) AV O


RGB INGB IN (PC)

1

2

AUDIO IN(RGB/DVI) AV O

1 2

HDMI INDMI/DVI IN

HDMI INDMI/DVI IN


1

Only 32PC5***


25/118

23


Connect the DVI output of the digital set-top box to the HDMI/DVI IN 1 jack on the TV.

Connect the audio output of the digital set-top box to the AUDIO(RGB/DVI) jack on the TV.

Turn on the digital set-top box. (Refer to the owners manual for the digital set-top box.)

Select HDMI1/DVI input source using the INPUT button on the remote control.

2

3

4

1

Connecting with a HDMI to DVI cable

G HDMI2(Except 22LG3***), HDMI3(Only 32/37/42/47/52LG5***) source does not support DVI source.

G If the Set-Top Box has a DVI output and no HDMI output, a separated audio connection is necessary.

G If the Set-Top Box does not support Auto DVI, you need to set the output resolution appropriately.

NOTE!


IN 1

OUT

VARIABLERIABLE AUDIOOUTUDIO OUT

HDMI INDMI DVI INHDMI/DVI INDMI/DVI IN1 AUDIO

(RGB/DVI)RGB(PC)

RGBI

N

RS-232C IN(CONTROL)

1 2

S-VIDEO

AV IN

VIDEO

L R

AUDIO

Y PB PR L R

VIDEO

COMPONENT INAUDIO

HDMI/DVI INAUDIO

(RGB/DVI) IN

H/P/P

ANTENN


RGB(PC) IN

11

2

Only 22LG3***


1 2RGB IN (PC)

ANTENNAIN

1

2

RS-232C IN(CONTROL&SERVICE) AUDIO IN(RGB/DVI) AV OUT AV IN


RGB IN (PC)

ANTENNAIN

1

2

AUDIO IN(RGB/DVI) AV OUT AV IN

1 2

VIDEOIDEO AUDIOCOMPONENTOMPONENT ININ


ANTENNAIN

1

2

AV OUT AV IN

1 2

AUDIO IN(RGB/DVI)RGB/DVI)

HDMI INDMI/DVI IN

HDMI INDMI/DVI IN

HDMI INDMI/DVI IN

RS-232C INS-232C IN(CONTROL&SERVICE)


2

Only 32PC5***

1


26/118

1

2

COMPONENT IN

VIDEO AUDIO

1 2

24

DVD SETUP



Connecting with a component cable

Component Input ports

To achieve better picture quality, connect a DVD player to the component input ports as shown below.

Component ports on the TV Y PB PR

Video output ports

on DVD player

Y

Y

Y

Y

PB

B-Y

Cb

Pb

PR

R-Y

Cr

Pr

Connect the video outputs (Y, PB, PR) of the DVD to the COMPONENT IN VIDEOjacks on the TV.

Connect the audio outputs of the DVD to the COMPONENT IN AUDIOjacks on the TV.

Turn on the DVD player, insert a DVD.

Select Component1 input source using the INPUT button on the remote control.

If connected to COMPONENT IN2, select Component 2 input source(Except 22LG3***).

Refer to the DVD player's manual for operating instructions.

2

3

4

5

1

Y PB PR L R

VIDEO

COMPONENT INAUDIO

1 2

Only 22LG3***

VIDEOIDEO AUDIOCOMPONENTOMPONENT IN

1 2RGB INGB IN (PC)

1

2

HDMI INDMI/DVI IN

RS-23S-232C IN(CONTROL&CONTROL&SERVIC

1 2

Only 32PC5***


27/118

25


Connecting with a S-Video cable (Except 32PC5***)

Connect the S-VIDEO output of the DVD to theS-VIDEO input on the TV.

Connect the audio outputs of the DVD to the AUDIOinput jacks on the TV.

Turn on the DVD player, insert a DVD.

Select AV2 input source using the INPUT button onthe remote control.

Refer to the DVD player's manual for operatinginstructions.

2

3

4

5

1

AV IN 2

L RS-VIDEOVIDEO

OUTPUTSWITCH

ANT IN

ANT OUT

1 2

Only 22LG3***

S-VIDEO

AV IN

VIDEO

L R

AUDIO

Y PB PR L R

VIDEO

COMPONENT INAUDIO

H/P

ICE)

L RS-VIDEOVIDEO

OUTPUTSWITCH

ANT IN

1

2


28/118

26



HDDMI INDMI DVI IN HDDMI INHDMI/DVI INDMI/DVI IN1 2

HDMI INDMI DVI IN

AV IN 2

L/MONO RUDIOIDEO

VARIABLE AUDIO OUT

L/MONO RAUDIOUDIOVIDEOIDEO

IN 1

OUT

VARIABLE AUDIO OUT

1

Connecting with a HDMI cable

Connect the HDMI output of the DVD to theHDMI/DVI IN 1, HDMI IN 2(Except 22LG3***) orHDMI IN 3(Only 32/37/42/47/52LG5***)jack on the TV.

Select HDMI1/DVI , HDMI2(Except 22LG3***) orHDMI3 (Only 32/ 37/42/47/52LG5***) input sourceusing the INPUT button on the remote control.

Refer to the DVD player's manual for operating instruc-tions.

1

G The TV can receive video and audio signals simultaneously when using a HDMI cable.G If the DVD player supports Auto HDMI function, the output resolution of the source device will be automati-

cally TV to 1280x720p.G If the DVD player does not support Auto HDMI, you must TV the output resolution appropriately.

To get the best picture quality, adjust the output resolution of the source device to 1280x720p

(42LG31F**, 32/37/42/47/52LG5***:1920x1080i/1080p).

NOTE!

2

3

HDMI/DVI IN RGB(PC) IN

1

Only 22LG3*** VIDEO AUDIOCOMPONENT IN

RGB IN

1

2

1 2


1 2RGB IN (P

1

2

HDMI INDMI/DVI IN

HDMI INDMI/DVI IN

RS-232C(CONTROL&SE

RS-23(CONTROL&

1

Only 32PC5***


29/118

27

VCR SETUP


I To avoid picture noise (interference), allow adequate distance between the VCR and TV.

I Typically a frozen still picture from a VCR. If 4:3 picture format is used for an extended period the fixed

images on the sides of the screen may remain visible.

Connect the ANT OUT socket of the VCRto the ANTENNA IN socket on the TV.

Connect the antenna cable to the ANT INsocket of the VCR.

Press the PLAY button on the VCR andmatch the appropriate programmebetween the TV and VCR for viewing.

2

3

1

L/MONO RUDIOIDEO

VIDEO L RUDIO

HDMI INDMI DVI IN

ANTENNA

IN

OUTPUTSWITCHANT IN

S-VIDEO VIDEOANT OUT L

HDMI INDMI DVI IN

L/MONO RUDIOIDEO

VARIABLE AUDIO OUT

Wall Jack

Antenna

Connecting with a RF cable

1

2

VIDEO

R

DIO

H/P

ANTENNA IN

OUTPUTSWITCHANT IN

S-VIDEO VIDEOANT OUT L

Wall Jack

Antenna

1

2

Only 22LG3***

OUTPUTSWITCHANT IN

RS-VIDEO VIDEOANT OUT L


RGB IN (PC)

1

2

AUDIO IN(RGB/DVI)

1 2ANTENNAIN

AV OUT AV IN

L/M

HDMI INDMI/DVI IN


Wall Jack

Antenna

1

2

Only 32PC5***


30/118

Connecting with a RCA cable

Connect the AUDIO/VIDEOjacks between TV and VCR. Match the jack colours (Video = yellow,Audio Left = white, and Audio Right = red)

Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owners manual.)

Select AV1 input source using the INPUT button on the remote control.

If connected to AV IN2, select AV2 input source(Except 32PC5***).

1

2

3

G If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONOjackof the TV.

NOTE!

28



HDMI INDMI DVI IN

L RS-VIDEO VIDEO

OUTPUTSWITCH

ANT IN

ANT OUT


IN 1

OUT

VARIABLERIABLEAUDIO OUTUDIO OUT

L RS-VIDEO VIDEO

OUTPUTSWITCH

ANT IN

ANT OUT

RGB (PC) IN

S-VIDEO

AV IN

VIDEO

L R

AUDIO

Y PB PR L R

VIDEO

COMPONENT INAUDIO

AUDIO

(RGB/DVI) IN

H/

ANTE

1

1

Only 22LG3***

L RS-VIDEO VIDEO

OUTPUTSWITCH

ANT IN

ANT OUT


RGB IN (PC)

ANTENNANTENNAIN

1

2

AUDIO IN(RGB/DVI) A OUTOUT

1 2

AV ININ

L/LMONO

MONO

RAUDIO

ADIO

VIDEO

VDE

HDMI INDMI/DVI IN

RS-232C IN(CONTROL&SERVICE) 1

Only 32PC5***


31/118

29


G If both S-VIDEO and VIDEO sockets have been conneced tothe S-VHS VCR simultaneously, only the S-VIDEO can bereceived.

NOTE!

Connecting with a S-Video cable (Except 32PC5***)

Connect the S-VIDEO output of the VCR to theS-VIDEO input on the TV. The picture quality isimproved; compared to normal composite (RCA cable)input.

Connect the audio outputs of the VCR to the AUDIOinput jacks on the TV.

Insert a video tape into the VCR and press PLAY onthe VCR. (Refer to the VCR owners manual.)

Select AV2(orA V(Only 22LG3***)) input sourceusing the INPUT button on the remote control.

2

3

4

1

AV IN 2

L RS-VIDEOVIDEO

OUTPUTSWITCH

ANT IN

ANT OUT

1

2

Only 22LG3***

S-VIDEO

AV IN

VIDEO

L R

AUDIO

Y PB PR L R

VIDEO

COMPONENT INAUDIO

H/P

E)

L RS-VIDEOVIDEO

OUTPUTSWITCH

ANT IN

1 2


32/118

30



HEADPHONE SETUP(Only 22LG3***)

When connecting with a Headphone cable

Insert the headphone plug to the headphone socket of theset. You can listen to the sound through the headphone. Toadjust the head-phone volume, press the F / G button. Ifyou press the MUTE button, the sound from the head-phone is switched off.

1H/P


33/118

31


OTHER A/V SOURCE SETUP

Connect the AUDIO/VIDEO jacks between TVand external equipment. Match the jack colours.

(Video = yellow, Audio Left = white, and Audio Right= red)

Select AV2(orA V(Only 22LG3***))input sourceusing the INPUT button on the remote control.

If connected to AV IN1, select AV1 inputsource.

Operate the corresponding external equipment.

Refer to external equipment operating guide.

1

2

3 AV IN 2IN 2

L RVIDEO

Camcorder

Video Game Set

1

S-VIDEO

AV IN

VIDEO

L R

AUDIO

Y PB PR L R

VIDEO

COMPONENT INAUDIO

H/P

L RVIDEO

Camcorder

Video Game Set

1

Only 22LG3***

L RVIDEO


RGB IN (PC)

ANTENNAIN

AUDIO IN(RGB/DVI) A TOUT

1 2

AV ININ

L/LMONO

MONO

RAUDIO

ADIO

VIDEO

VDE

HDMI INDMI/DVI IN


Camcorder

Video Game Set

1

Only 32PC5***


34/118

32



EXTERNAL STEREO SETUP (Except 22LG3***, 32PC5***)

G When connecting with external audio equipments, such asamplifiers or speakers, please turn the TV speakers off.(G p.83)

G Select Variable Out in Audio menu to connect theVARIABLE AUDIO OUTjacks.(G p.84)

NOTE!

Use to connected either an external amplifier, or add a sub-

woofer to your surround sound system.

Connect the input jack of the stereo amplifier to theVARIABLE AUDIO OUTjacks on the TV.

Set up your speakers through your analog stereoamplifier, according to the instructions provided withthe amplifier.

2

1

AV OUTPUT SETUP(Except 22LG3***)

The TV has a special signal output capability which allows you

to hook up the second TV or monitor.

Connect the second TV or monitor to the TVs AV OUTjacks.

See the Operating Manual of the second TV or monitor

for further details regarding that devices input settings.

G Component, RGB, HDMI input sources cannot be used forAV out.

G We recommend to use the AV OUT jacks for VCR recording.

NOTE!

2

1

HDMI INDMI DVI IN

L/MONO RUDIOIDEO

OUT

VARIABLERIABLE AUDIO OUTUDIO OUT

1

HDMI INDMI DVI IN HDMI INDMI DVI IN

L/MONO RUDIOIDEO

OUT

VARIABLERIABLE AUDIOOUTUDIO OUT

L/MONO RUDIOIDEO

VARIABLE AUDIO OUT

L R

S-VIDEO

VIDEO

ANTENNAIN

AV OUTOUT AV IN

LMONO

RADIO

VARIABLEAUDIO

OUT

VIA

ADIOOUT

VDE

L R

S-VIDEO

VIDEO

VIDEO IOUDIOCOMPONENT IN


1

2

1 2INDMI INDMI/DVI IN

RS-232C INS-232C IN(CONTROL&SERCONTROL&SERVICE)ICE) AUDIO INUDIO IN(RGB/DVI)RGB/DVI)

1

1

Only 32PC5***


35/118

33


L/MONO RUDIO

L RUDIO

HDMI INAUDIO

(RGB/DVI)RGB(PC)

RGBI

N

RGB OUTPUT AUDIO

HDMI INDMI DVI INDMI/DVI IN1

L/MONO RUDIOIDEO

VIDEO L RUDIO

1 2

VIDEO L RUDIO

IDEO

VIDEO

RGB (PC) IN

S-VIDEO

AV IN

VIDEO

L R

AUDIO

Y PB PR L R

VIDEO

COMPONENT INAUDIO

AUDIO

(RGB/DVI) IN

AN

RGB OUTPUT AUDIO

1

2

PC SETUP

This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.

Connecting with a D-sub 15 pin cable

Connect the RGB output of the PC to the RGB(PC) jack on the TV.

Connect the PC audio output to the AUDIOjack on the TV.

Turn on the PC and the TV.

Select RGB PC input source using the INPUT button on the remote control.

2

3

4

1

Only 22LG3***

RGB OUTPUT AUDIO



ANTENNAIN

1

2

AV OUT AV INUDIO IN(RGB/DVI)

1 2HDMI INDMI/DVI IN

RS-232C IN(CONTROL&SERCONTROL&SER VICE)ICE)

1 2

Only 32PC5***


36/118

34



NOTE!

G To enjoy vivid picture and sound, connect the PC

to the TV.G Avoid keeping a fixed image on the TV s screen

for prolonged periods of time.The fixed imagemay become permanently imprinted on thescreen;use a screen saver when possible.

G Connect the PC to the RGB (PC) port of the TV;change the resolution output of PC accordingly.

G There may be interference relating to resolution,vertical pattern, contrast or brightness in PCmode. Change the PC mode to another resolu-tion or change the refresh rate to another rate

or adjust the brightness and contrast on themenu until the picture is clear. If the refresh rateof the PC graphic card can not be changed,change the PC graphic card or consult the man-ufacturer of the PC graphic card.

G The synchronization input waveform forHorizontal and Vertical frequencies are separate.

G We recommend using 1024 x 768, 60Hz

(32PC5*** VGA PLASMA TV Models)/ 1024 x768, 60Hz (42PG1***,42PG2*** XGA PLASMATV Models)/1360 x 768, 60Hz(50PG1***,50PG2***) /1920 x 1080(42LG31F**,32/37/42/47/52LG5***)/1366 x 768(26/32/37/42/47LG1***,26/32/37/42/47LG3***)/1680 x1050(22LG3***) for the PC mode, theseshould provide the best picture quality.

G If the resolution of PC is over SXGA, there willbe no picture on the TV.(Only HD Models)

G Connect the audio cable from the PC to theAudio input on the TV.(Audio cables are notincluded with the TV).

G If you use too long an RGB-PC cable, there maybe interference on the screen. We recommendusing under 5m of the cable. This provides thebest picture quality.

Supported Display Resolution

31.47 59.9431.50 60.00

31.25 50.00

44.96 59.9445.00 60.0037.50 50.00

33.72 59.9433.75 60.0028.125 50.00

67.432 59.9467.5 60

56.25 50

Resolution

720x480

720x576

1280x720

1920x1080i

1920x1080p

HDMI-DTV mode

Horizontal VerticalFrequency(kHz) Frequency(Hz)Resolution

RGB-PC mode

31.469 59.94

37.879 60.317

48.363 60.004

63.668 59.89565.290 59.954

Horizontal VerticalFrequency(kHz) Frequency(Hz)

Only 22LG3***

640x480

800x600

1024x768

1280x10241680x1050


37/118

31.47 59.9431.50 60.00

31.25 50.00

44.96 59.9445.00 60.0037.50 50.00

33.72 59.9433.75 60.00

28.125 50.00

67.432 59.9467.5 60

56.25 5027 24

33.75 30

35


Resolution

720x480

720x576

1280x720

1920x1080i

1920x1080p

HDMI-DTV mode


31.47 59.9431.50 60.00

31.25 50.00

44.96 59.9445.00 60.0037.50 50.00

33.72 59.94

33.75 60.0028.125 50.00

67.432 59.9467.5 60

56.25 5027 24

33.75 30

Resolution

720x480

720x576

1280x720

1920x1080i

1920x1080p

HDMI-DTV mode


Resolution

RGB-PC mode


Plasma TV models

Resolution

RGB-PC mode

31.468 70.09

31.469 70.09

31.469 59.94

37.879 60.317

48.363 60.004

47.776 59.87

47.720 59.799

47.700 60.0063.668 59.895

66.587 59.934


LCD TV models (Except 22LG3***)

640x350

720x400

640x480

800x600

1024x768

848x480

852x480

1280x768

1360x768

Supported Display Resolution

Only 42LG31F**, 32/37/42/47/52LG5***

Only 50PG1***, 50PG2*** Only 32PC5***

640x350

720x400

640x480

800x600

1024x768

1280x7681360x768

1366x7681280x1024

1920x1080

31.468 70.09

31.469 70.09

31.469 59.94

37.879 60.317

29.514 59.75

32 60.491

48.363 60.004

47.776 59.87

47.720 59.799


38/118

36



Press the MENU button and then use / button toselect the Picture menu.

Press the button and then use / button to selectScreen.

Press the button and then use / button to selectAuto Config..

Press the button to start Auto Config..

When Auto config. has finished, OK will be shown onscreen.

If the position of the image is still not correct, try Autoadjustment again.

If picture needs to be adjusted again after Auto adjust-ment in RGB (PC), you can adjust the Manual Config..

Press the MENU button to return to normal TV viewing.

Press the RETURN orMENU(Only 22LG3***) button tomove to the previous menu screen.

Automatically adjusts picture position and minimizes image

instability. After adjustment, if the image is still not correct,your TV is functioning properly but needs further adjustment.

Auto configure

This function is for automatic adjustment of the screen posi-

tion, clock, and phase. The displayed image will be unstable for

a few seconds while the auto configuration is in progress.

1

2

3

4

5

1

3 4

Screen Setup for PC mode

Auto Configure (RGB [PC] mode only)

Picture Mode

Colour Temperature

XD

Advanced

Aspect Ratio

Picture Reset

Screen

Picture

Screen

Auto config.

Manual Config.

XGA Mode

Reset

To SetAuto Config. G

2

Picture

Picture Mode

Colour Temperature

XD

Advanced

Aspect Ratio

Picture Reset

Screen To SetScreen G


39/118

37


If the picture is not clear after auto adjustment and especially ifcharacters are still trembling, adjust the picture phase manually.

Its not available to use Phase, Clock function in COMPONENT(480i/480p/576i/576p/720p/1080i/1080p), HDMI(480p/576p/720p/1080i/1080p).

Clock This function is to minimize any vertical bars or stripes

visible on the screen background the horizontal screensize will also change.

Phase This function allows you to remove any horizontal noiseand clear or sharpen the image of characters.

Press the MENU button and then use / button to

select the Picture menu.


Press the button and then use / button to selectManual Config..

Press the button and then use / button to selectPhase, Clock, H-Position orV-Posit ion.

Press the / button to make appropriate adjustments.



1

2

3

4

5

6

Manual Configure (Adjustment for screen Phase, Clock, Position)(RGB [PC] mode only)

3 4 5

1

Picture Mode

Colour Temperature

XD

Advanced

Aspect Ratio

Picture Reset

Screen

Picture

2

Picture

Picture Mode

Colour Temperature

XD

Advanced

Aspect Ratio

Picture Reset


Screen

Auto config.

Manual Config.

XGA Mode

Reset

Phase 51

Clock 50

H-Position 50

V-Position 50

Manual Config. G


40/118

38


3 4

3 4

This feature is not available for all models.

To view a normal picture, match the resolution of RGB modeand selection of XGA/VGA mode.

This function works in the following mode: RGB[PC] mode.



Press the button and then use / button to selectXGA Mode orVGA Mode.

Press the button and then use / button to select

the desired XGA/VGA resolution.

Press the MENU button to return to normal TV viewing.Press the RETURN button to move to the previous menuscreen.

Selecting XGA/VGA mode (Except 42PG1***, 42PG2***, 22LG3***)

1

2

3

4

5


1

Picture Mode

Colour Temperature

XD

Advanced

Aspect Ratio

Picture Reset

Screen

Picture

2

Picture

Picture Mode

Colour Temperature

XD

Advanced

Aspect Ratio

Picture Reset

Screen To SetScreenG

Screen

Auto Config.

Manual Config.

XGA Mode

Reset

1024x768

1280x768

1360x768

1366x768

XGA Mode G

Screen

Auto Config.

Manual Config.

XGA Mode

Reset

640x480

848x480

852x480

VGA Mode G

* Except PLASMA TV models

* Only VGA Mode


41/118

39


This function operates in current mode.

To initialize the adjusted value



Press the button and then use / button to selectReset.

Press the button.


Press the RETURN orMENU(Only 22LG3***) button to

move to the previous menu screen.

1

2

3

4

5

Initializing(Reset to original factory settings)

3 4

1

Picture Mode

Colour Temperature

XD

Advanced

Aspect Ratio

Picture Reset

Screen

Picture

2

Picture

Picture Mode

Colour Temperature

XD

Advanced

Aspect Ratio

Picture Reset


ScreenAuto config.

Manual Config.

XGA Mode

Reset To SetReset G


42/118


WATCHING

TV/PROGRAMMECO

NTROL

40

REMOTE CONTROL KEY FUNCTIONS (Only 22LG3***)When using the remote control, aim it at the remote control sensor on the TV.

RATIO

POWER

TV

INPUT

Switches the set on from standby or off to standby.

Returns to the TV viewing from any mode.Switches the set on from standby.

If you press the button once, the input source OSD willappear on screen as shown. Press the D / E button andthen OK button to select the desired input source.

MUTE

PSM

SSM

I/II

Switches the sound on or off.

Recalls your preferred picture setting.

Recalls your preferred sound setting.

Selects the sound output.

0~9 numberbutton

Selects a programme.Selects numbered items in a menu.Switches the set on from standby.

LIST

Q.VIEW

Displays the programme table.

Returns to the previously viewed programme.


43/118

WATCHING

TV/PROGRAMMECO

NTROL

41

RATIO

THUMBSTICK(Up/Down/Left/

Right)

OK

Allows you to navigate the on-screen menus and adjustthe system settings to your preference.

Adjusts the volume.Selects a programme.Switches the set on from standby. (Up/Down)

Accepts your selection or displays the current mode.

MENU

SLEEP

RATIO

Selects a menu.

Sets the sleep timer.

Selects your desired picture format.

Colouredbuttons

TELETEXTBUTTONS

These buttons are used for teletext (only TELETEXTmodels) orProgramme edit.

These buttons are used for teletext.For further details, see the Teletext section.

Installing Batteries

IOpen the battery compartment cover on the back side and install thebatteries matching correct polarity (+with +,-with -).

I Install two 1.5V AAA batteries. Dont mix old or used batteries withnew ones.

IClose cover.


44/118


WATCHING

TV/PROGRAMMECO

NTROL

42

REMOTE CONTROL KEY FUNCTIONS (Except Plasma TV models, 22LG3***)When using the remote control, aim it at the remote control sensor on the TV.

MUTE

PIP AV MODE

FAV

TV INPUT

STB

POWER

Q. MENU MENU

OK

1 2 3

4 5 6

7 8

0

9

LIST Q.VIEW

DVD

TIME SIZE UPDATE REVEAL

INDEX HOLD TEXT

RETURN

P

MODE

POWER

INPUT

Selects the remote operating modes.

Switches the TV on from standby or off to standby.

External input mode rotate in regular sequence.Switches the TV on from standby.

Q. MENU

MENU

Select the desired quick menu source.

Selects a menu.Clears all on-screen displays and returns to TV viewingfrom any menu.

See a list of AV devices connected to TV.When you toggle this button, the Simplink menuappears at the screen.

RETURN

PIP

AV MODE

Allows the user to move return one step in an interactiveapplication or other user interaction function.

Switches the sub picture PIP, DW mode.

It helps you select and set images and sounds whenconnecting AV devices.

Colouredbuttons

These buttons are used for teletext (on TELETEXTmodels only) , Programme edit.

TELETEXTBUTTONS

These buttons are used for teletext.

For further details, see the Teletext section.

1

1


45/118

43

WATCHING

TV/PROGRAMMECO

NTROL

MUTE

PIP AV MODE

FAV

TV INPUT

STB

POWER

Q. MENU MENU

OK

1 2 3

4 5 6

7 8

0

9

LIST Q.VIEW

DVD


INDEX HOLD TEXT

RETURN

P

VOLUME +/-

FAV

MUTE

Programme/

0~9 numberbutton

LIST

Q.VIEW

Adjusts the volume.

Displays the selected favourite programme.


Selects a programme.

Selects a programme.Selects numbered items in a menu.




I Open the battery compartment cover on the back and install thebatteries matching correct polarity (+with +,-with -).

I Install two 1.5V AAA batteries. Do not mix old or used batterieswith new ones.

I Close cover.

VCR/DVD

control buttons

Controls some video cassette recorders or DVD players.

Control connected AV devices by pressing the / // , OK buttons and buttons forG,A, l l,FF andGG.

(The button does not provide such functions.)

THUMBSTICK(Up/Down/Left

Right)

OK




46/118


WATCHING

TV/PROGRAMMECO

NTROL

44

REMOTE CONTROL KEY FUNCTIONS (Only 42/50PG1***, 42/50PG2***)When using the remote control, aim it at the remote control sensor on the TV.

MUTE

PIP AV MODE

FAV

RATIO INPUT

SOUND

POWER

Q. MENU MENU

OK

1 2 3

4 5 6

7 8

0

9

LIST Q.VIEW

PICTURE


INDEX HOLD TEXT

RETURN

P

RATIO

SOUND

POWER

PICTURE

INPUT

Selects your desired picture format.

To select the sound appropriate to your viewing programme.


Adjusts the factory preset picture according to the room.


Q. MENU

MENU



See a list of AV devices connected to TV.When you toggle this button, the Simplink menu

appears at the screen.

RETURN

PIP

AV MODE

Allows the user to move return one step in an interactiveapplication or other user interaction function.



Colouredbuttons These buttons are used for teletext (on TELETEXTmodels only) , Programme edit.

TELETEXTBUTTONS




47/118

WATCHING

TV/PROGRAMMECO

NTROL

45

MUTE

PIP AV MODE

FAV

RATIO INPUT

SOUND

POWER

Q. MENU MENU

OK

1 2 3

4 5 6

7 8

0

9

LIST Q.VIEW

PICTURE


INDEX HOLD TEXT

RETURN

P

VOLUME +/-

FAV

MUTE

Programme/

0~9 numberbutton

LIST

Q.VIEW

Adjusts the volume.










I Close cover.

VCR/DVD

control buttons





Right)

OK




48/118


WATCHING

TV/PROGRAMMECO

NTROL

46

REMOTE CONTROL KEY FUNCTIONS (Only 32PC5***)When using the remote control, aim it at the remote control sensor on the TV.

OK

MENU Q.MENU

AV MODE

1 2 3

4 5 6

7 8 9

0 Q.VIEWLIST

INPUT

POWER

PRVOLMUTE

FAV

*

RETURN

TEXT PIP

?

i

PAGE

POWER

INPUT



See a list of AV devices connected to TV.When you toggle this button, the Simplink menu appearsat the screen.

Colouredbuttons

These buttons are used for teletext (on TELETEXTmodels only) orProgramme edit.

0~9 numberbutton

LIST

Q.VIEW




MENU

RETURN

Q. MENU

AV MODE


Right)

OK


Allows the user to move return one step in an interac-tive application or other user interaction function.






49/118

WATCHING

TV/PROGRAMMECO

NTROL

47




I Close cover.

OK

MENU Q.MENU

AV MODE

1 2 3

4 5 6

7 8 9

0 Q.VIEWLIST

INPUT

POWER

PRVOL

MUTE

FAV

*

RETURN

TEXT PIP

?

i

PAGE

TELETEXTBUTTONS



1

1

VCR/DVD

control buttons

PIP





VOLUME +/-

MUTE

*

FAV

Programme+/-

PAGEUP/DOWN

Adjusts the volume.


No function



Move from one full set of screen information to the nextone.


50/118


WATCHING

TV/PROGRAMMECO

NTROL

48

Press the +/-(or VOL F / G orVOL +/-) button to adjustthe volume.

If you wish to switch the sound off, press the MUTE button.

You can cancel the Mute function by pressing the MUTE or +/-(or VOL F / G orVOL +/-)button.

PROGRAMME SELECTION

TURNING ON THE TV

When your TV is turned on, you will be able to use its features.

Firstly, connect the power cord correctly.

At this stage, the TV switches to standby mode.

I In standby mode to turn TV on, press the , INPUT, P D / E (or P /

or PR D / E) button on the TV or press the POWER, TV (Only 22LG3***),

INPUT, P / (orPR D / EorPR +/-), NUMBER(0~9) buttons on the

remote control and the TV will switch on.

1

VOLUME ADJUSTMENT

Press the P / (orPR D / E orPR +/-) orNUMBER buttons toselect a programme number.

2

3

1

1

Initializing Guide

Note:

a. It will automatically disappear after approx. 40 seconds unless a button is pressed.b. In -Store mode is only for shop display and not for general customer use.c. "Home mode is the optimal setting for home environments, and is the TV's default mode.d. "In-Store" mode is the optimal setting for store environments. If a user modifies image quality data,

In- Store mode initializes the product to the image quality set by us after a certain period of time.e. The mode (Home, In- Store) can be changed by executing Factory Reset in the Option menu.

If the OSD (On Screen Display) is displayed on the screen after turning on the TV, you can adjust theLanguage,Location, Auto Tuning.


51/118

WATCHING

TV/PROGRAMMECO

NTROL

49

QUICK MENU (Except 22LG3***)

Your TV's OSD (On Screen Display) may differ slightly from that shown in this

manual.

Q.Menu (Quick Menu) is a menu of features which users might use frequently.

Aspect Ratio: Selects your desired picture format.For Zoom Setting, select 14:9, Zoom1 and Zoom2 in Ratio Menu. After completingZoom Setting, the display goes back to Q.Menu.

Power Saving (only Plasma TV Models): Adjusts screen brightness to reduce the powerconsumption of the set.

Backlight (only LCD TV Models):Adjusts screen brightness. It returns to the defaultsettings brightness by changing mode source.

Picture Mode : Selects your desired Picture Mode. Sound Mode : It is a feature to automatically set the sound combination which it deems the

best for the images being watched. Selects your desired Sound Mode.

Multi Audio : Selects the sound output. Programme Edit : Adjusts the stored programmes by delete, copy, move or skip. Sleep Timer: Selects the sleep timer.

Aspect Ratio

power Saving

Backlight

Picture Mode

Sound Mode

Multi Audio

programme Edit

Sleep Timer

F 4 : 3 G

Zoom Setting

0

0

Sport

Sport

L+R

To Set

Off

Q. MENU

DEFG RETURN

Press the Q.MENU button and then / button todisplay each menu.

Press the / button to select your desired Source.

Press the Q.MENU button to return to normal TV viewing.

1

2

3

* PLASMA TV modelsonly (Except 32PC5***)

* LCD TV models only

Aspect Ratio

power Saving

Picture Mode

Sound Mode

Multi Audio

programme Edit

Sleep Timer

F 4 : 3 G

Zoom Setting

On

Sport

Sport

L+R

To Set

Off

Q. MENU

DEF G RETURN

(only 32PC5***)


52/118


WATCHING

TV/PROGRAMMECO

NTROL

50

ON SCREEN MENUS SELECTION AND ADJUSTMENT

Press the MENU button and then / button to display each menu.

Press the button and then / button to select a menu item.

Change the setting of an item in the sub or pull-down menu with / button.

You can move to a higher level menu by pressing the O K button.

Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.The OSD mainly use pictures for the PLASMA TV models.

NOTE!a. The OSD (On Screen Display) function enables you to adjust the screen status conveniently since it

provides graphical presentation.

b. In this manual, the OSD (On Screen Display) may be different from your TVs because it is justexample to help the TV operation.

c. In the teletext mode, menus are not displayed.

Setup MENU Picture MENU Audio MENU

Time MENUOption MENU

1

2

3

Language

SIMPLINK

Key Lock

ISM Method

Power Saving

Set ID

Factory Reset

Option

Clock

Off Time

On Time

Sleep Timer

Auto Sleep

Time

Auto Tuning

Manual Tuning

Programme Edit

Favourite Programme

Setup

Sound Mode

Auto Volume

Balance 0

TV Speaker

Audio Out

Audio

Language

SIMPLINK

Key Lock

Set ID

Power Indicator

Factory Reset

Option

or

PLASMA TV models LCD TV models

Picture Mode

Colour Temperature

XD

Advanced

Aspect Ratio

Picture Reset

Screen

Picture

Except 22LG3***

Except 22LG3***

Except 32/37/42/47/52LG5***


53/118

WATCHING

TV/PROGRAMMECO

NTROL

51

Press the MENU button and then / button to select theSetup menu.

Press the button and then / button to select AutoTuning.

Press the button and then / button to select System.

Press the / button to select a TV system menu;

BG: PAL B/G, SECAM B/G (Europe / East Europe / Asia /NewZealand / M.East / Africa / Australia)

I : PAL I/II (U.K. / Ireland / Hong Kong / South Africa)

DK: PAL D/K, SECAM D/K (East Europe / China / Africa / CIS)

M : (USA / Korea / Philippines)

Press the / button to select Storage From.

Press the / button or NUMBER buttons to select the ini-tial programme number. If you use NUMBER buttons, any

number under 10 is entered with a numeric 0 in front of it,i.e.05 for 5.

Press the / button to select Search.

Press the button to begin auto tuning.

All receivable stations are stored.

To stop auto tuning, press the RETURN orMENU(Only22LG3***) button.

When auto tuning is complete, the Programme edit menuappears on the screen. See the Programme edit section to editthe stored programme.



1

2

3

4

5

6

7

8

9

Up to 100 TV stations can be stored by programme numbers (0 to 99). Once you

have preset the stations, you will be able to use the P / (or PR D / E orPR +/-) or NUMBER buttons to scan the stations you have programmed.

Stations can be tuned using automatic or manual modes.

All stations which can be received are stored by this method. It is

recommended that you use Auto tuning during installation of this TV.

AUTO PROGRAMME TUNING

Auto Tuning

System

Storage From

Search

System G

2

Setup

Auto Tuning

Manual Tuning

Programme EditFavourite Programme

To SetAuto Tuning G

3 4 5 6 7

8

Auto Tuning

C 05 BG

5 35%

BG

I

DK

M

1

Auto Tuning

Manual Tuning

Programme Edit

Favourite Programme

Setup


54/118


WATCHING

TV/PROGRAMMECO

NTROL

52

MANUAL PROGRAMME TUNING

Press the MENU button and then / button to selectthe Setup menu.

Press the button and then / button to selectManual Tuning.

Press the button and then / button to select Storage.

Press the / button or NUMBER buttons to select thedesired programme number (0 to 99). If you use NUMBERbuttons, any number under 10 is entered with a numeric 0in front of it, i.e. 05 for 5.

Press the / button to select System.

Press the / button to select a TV system menu;

BG: PAL B/G, SECAM B/G (Europe / East Europe / Asia /NewZealand / M.East / Africa / Australia)

I : PAL I/II (U.K. / Ireland / Hong Kong / South Africa)

DK: PAL D/K, SECAM D/K (East Europe / China / Africa / CIS)M : (USA / Korea / Philippines)

Press the / button to select Band.

Press the button and then / button to selectV/UHF orCable.

Press the / button to select Channel.

You can select the desired programme number with the/ button or NUMBER buttons. If possible, select the pro-gramme number directly with the number buttons. Any

number under 10 is entered with a numeric 0 in front of it,i.e. 05 for 5.

Press the / button to select Search.

Press the / button to commence searching. If a stationis found the search will stop.

Press the O K button to store it.

To store another station, repeat steps 3 to 1 3.



Manual programme lets you manually tune and arrange the

stations in whatever order you desire.

1

2

3

4

5

6

7

8

9

10

11

12

13

14

1573 4 5 6

8 9 10 11 12

1

Auto Tuning

Manual Tuning

Programme Edit

Favourite Programme

Setup

2

Setup

Auto Tuning

Manual Tuning

Programme Edit

Favourite Programme

To SetManual Tuning G

Manual Tuning

Storage

System

Band

Channel

Fine

Search

Name

Booster

Storage G 99


55/118

WATCHING

TV/PROGRAMMECO

NTROL

53

FINE TUNING



Press the button and then / button to select F ine.

Press the button and then / button to fine tune forthe best picture and sound.

Press the OK button to store it.



1

2

3

4

5

6

Normally fine tuning is only necessary if reception is poor.

3 4 5

1

Auto Tuning

Manual Tuning

Programme Edit

Favourite Programme

Setup

2

Setup

Auto Tuning

Manual Tuning

Programme Edit

Favourite Programme


Manual Tuning

Storage

System

Band

Channel

Fine

Search

Name

Booster

Fine G F /G


56/118


WATCHING

TV/PROGRAMMECO

NTROL

54

ASSIGNING A STATION NAME

You can assign a station name up to five characters to each programme number.



Press the button and then / button to selectName.

Press the button and then / button. You can use ablank, +, -, the number0 to 9 and the alphabet A to Z.

Press the / button to select the position and makeyour choice of the second character, and so on.

Press the OK button to store it.



1

2

3

4

5

6

73 4 5 6

1

Auto Tuning

Manual Tuning

Programme Edit

Favourite Programme

Setup

2

Setup

Auto Tuning

Manual Tuning

Programme Edit

Favourite Programme


Manual Tuning

Storage

System

Band

Channel

Fine

Search

Name

Booster

Name G C 05


57/118

WATCHING

TV/PROGRAMMECO

NTROL

55

In some models, Booster is an optional function. Only a set

with Booster can perform this function.

If reception is poor select Booster to On.When the signal is strong, select OFF.

BOOSTER

Press the MENU button and then / button to select

the Setup menu.



Booster.


On orOff.



1

2

3

4

5

3 4 5 6

1

Auto Tuning

Manual Tuning

Programme Edit

Favourite Programme

Setup

2

Setup

Auto Tuning

Manual Tuning

Programme Edit

Favourite Programme


Manual Tuning

Storage

System

Band

Channel

Fine

Search

Name

BoosterBooster G Off

On


58/118


WATCHING

TV/PROGRAMMECO

NTROL

56

PROGRAMME EDIT

This function enables you to delete or skip stored programmes.

Also you can move some stations to other programme numbersor copy a blank station data into the selected programme number.


Press the button and then / button to selectProgramme Edit.

Press the button to display the Programme edit menu.

A Deleting a programme

1.Select a programme to be deleted with the / // button.

2.Press the RED button twice.

The selected programme is deleted, all the following

programmes are shifted up one position.

A Copying a programme

1.Select a programme to be copied with the / // button.

2.Press the GREEN button.All the following programmes are shifted down one position.

A Moving a programme

1.Select a programme to be moved with the / / /button.

2.Press the YELLOW button.

3.Move the programme to the desired programme number withthe / / / button.

4.Press the YELLOW button again to release this function.

A Skipping a programme number

1.Select a programme number to be skipped with the // / button.

2.Press the BLUE button. The skipped programme turns to blue.

3.Press the BLUE button again to release the skipped pro-gramme.

When a programme number is skipped it means that you willbe unable to select it using the / button during normalTV viewing. If you wish to select the skipped programme,directly enter the programme number with the NUMBER but-tons or select it in the programme edit or table menu.



1

2

3

4

3

Programme Edit

Delete

Move

Copy

Skip

0 C 03 5 S 69

1 BLN 03 6 S 17

2 C 12 7 S 22

3 S 66 8 C 09

4 S 67 9 C 11

1

Auto Tuning

Manual Tuning

Programme Edit

Favourite Programme

Setup

2

Setup

Auto Tuning

Manual Tuning

Programme Edit

Favourite Programme

To SetProgramme Edit G


59/118

WATCHING

TV/PROGRAMMECO

NTROL

57

FAVOURITE PROGRAMME

Press the MENU button and then / button to select theSetup menu.

Press the button and then / button to selectFavourite Programme.

Press the button.

Press the / button to select - - - - - - -.

Select a desired programme with the / button or NUM-BER buttons. Any number under 10 is entered with a numeric

0in front of it, i.e.05 for 5.

To store another programme, repeat steps 4 to 5.

You can store up to 8 programmes.



This function lets you select your favourite programmes directly.

Repeatedly press the FAV button to select stored favourite

programmes.

Repeatedly press the YELLOW button to select stored favourite

programmes (Only 22LG3***).

1

2

3

4

5

6

7

1

2 3 4 5

Auto Tuning

Manual Tuning

Programme Edit

Favourite Programme

Setup

Setup

Auto Tuning

Manual Tuning

Programme Edit

Favourite Programme

- - - - - - -- - - - - - -- - - - - - -- - - - - - -- - - - - - -- - - - - - -- - - - - - -- - - - - - -

Favourite Programme G


60/118


WATCHING

TV/PROGRAMMECO

NTROL

58

SELECTING THE PROGRAMME LIST

You can check which programmes are stored in the memory by dis-playing the programme list.

A Displaying programme list

Press the LIST button to display the Programme list menu.

The programme list appears on the screen.

One programme list contains ten programmes as shown.

A Selecting a programme in the programme list

Select a programme with the / / / button.

Then press the O K button. The TV switches to the chosen

programme number.

A Paging through a programme list

There are 10 programme table pages in which contain 100 pro

grammes. Pressing the / / / button repeatedly turns the

pages.

Press the LIST button to return to normal TV viewing.

NOTE!

a. You may find some blue programmes. They have been set up

to be skipped by auto programming or in the programme edit

mode.

b. Some programmes with the channel number shown in the

programme list indicate there is no station name assigned.

Programme List

0 C 03 5 S 69

1 BLN 03 6 S 17

2 C 12 7 S 22

3 S 66 8 C 09

4 S 67 9 C 11


61/118

WATCHING

TV/PROGRAMMECO

NTROL

59

(Except 22LG3***)

32

Option

Language

SIMPLINKKey Lock

ISM Method

Power Saving

Set ID

Factory Reset

SIMPLINKG

OffOn

1

This function operates only with devices with the SIMPLINK logo.

Please check the SIMPLINK logo.

The product might not function properly when using it with other

products with HDMI-CEC function.

This allows you to control and play other AV devices connected to

the display through HDMI cable without additional cables and set-tings.

If you do not require the SIMPLINK menu, select Off.

Press the MENU button and then / button to selectthe Option menu.

Press the button and then / button to selectSIMPLINK.

Press the button and then / button to select On orOf f.


Press the RETURN button to move to the previous menuscreen.

1

2

3

4

Language

SIMPLINK

Key Lock

ISM Method

Power Saving

Set ID

Factory Reset

Option


62/118


WATCHING

TV/PROGRAMMECO

NTROL

60

NOTE!

G Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the rear terminal and Side terminal (HDMIterminal) of the SIMPLINK device with the HDMI cable.G After connecting the HDMI terminal for the home theatre with SIMPLINK function using the above

method, connect the VARIABLE AUDIO OUT terminal on the back of the TV to the VARIABLE AUDIO INterminal on the back of the SIMPLINK device with the VARIABLE AUDIO OUT cable.

G When operating an external device with SIMPLINK, press the TV button from the MODE button on theremote control.

G When you switch the Input source using the INPUT button on the remote control, you can stop theoperation of a device controlled by SIMPLINK.

G When you select or operate a media device with home theatre function, the speaker automaticallyswitches to home theatre speaker (HT speaker).

Disc playback

Control connected AV devices by pressing the / / / , OK, G, A, l l, FF and GG buttons.

(The button does not provide such functions)

Direct PlayAfter connecting AV devices to the TV, you can directly control the devices and play media without additional settings.

Select AV deviceEnables you to select one of the AV devices connected to the TV and operate it.

Power off al

lg tv manual

Documents

lg tv manual

picture reset

tv models32pc5

power saving picture

picture improvement

ferrite core

stand installation

power plug