lesson-9 drafting of trouser

Download LESSON-9  DRAFTING OF TROUSER

If you can't read please download the document

Post on 05-Jan-2016

25 views

Category:

Documents

1 download

Embed Size (px)

DESCRIPTION

LESSON-9 DRAFTING OF TROUSER. FRONT 0-1=LENGTH-- BELT WIDTH 1-2 =6 C.M 0-3= ¼ HIP+ 1.5 C.M 4=MIDDLE OF 3-1 4-5=5 C.M UP 3-6 =1/3 HIP -2 C.M 7=MIDDLE OF 6-3 0-8 =3-7 5-8 =3-7. LESSON-9 DRAFTING OF TROUSER. 1-10=3-7 6-7=5C.M IN 0-12= 3-11 11-14=1/16 HIP JOINT 14-6 ROUND SHAPE - PowerPoint PPT Presentation

TRANSCRIPT

  • LESSON-9 DRAFTING OF TROUSER

    FRONT0-1=LENGTH-- BELT WIDTH1-2 =6 C.M0-3= HIP+ 1.5 C.M4=MIDDLE OF 3-14-5=5 C.M UP3-6 =1/3 HIP -2 C.M7=MIDDLE OF 6-30-8 =3-75-8 =3-7

  • 1-10=3-76-7=5C.M IN 0-12= 3-1111-14=1/16 HIPJOINT 14-6 ROUND SHAPE12-13=1/4 WAIST + 2 C.M9-15 =1/4 KNEE 9-16= 1/4 KNEE 10-17=1/4 BOTTOMJOINT 13,3,15 AND 17JOINT 6,16,AND 18

    LESSON-9 DRAFTING OF TROUSER

  • BACK6-A =1 C.M DOWNA-B= 1/18 HIPC=MIDDLE OF 12-8C-D=1/24 HIP UPD JOINT TO 11DRAWING HIP SHAP 13,A,F AND DD-E =1/4 WAIST +3.5 C.MF=MIDDLE OFD-11 3-G=5 C.M UP

  • F-H =5 C.M UP15-I =2 C.M17-K=2 C.MJOINT E,H,I AND K16-J=2 C.M JOINT B,J AND L18-L=2 C.M JOINT B,J AND LBACK

  • FRONT CROSS POCKET13-A =5 C.M13-B =1/6 HIP

  • BACK DART ON WAIST LINEDART1=MIDDLE OF D-EJOINT 1-71-2 =1 C.M1-3 =1 C.M1-4 =7 C.M BACK CUT POCKET4-5 =1/16 HIP4-6 =1/16 HIP

  • SIDE CROSS POCKET BEGPOCKET BEG0-1 =1/3 HIP0-2 =1/6 HIP1-3 =1/6 HIP +2.5 C.M1-4 =4 C.M UP

  • ZIPPER FLYFLY0-1=1/4 HIP 5 C.M1-2 =2 C.M1-3 =2 C.M0-4 = 5 C.M

  • WAIST BELTRIGHT BELT0-1=WAIST BELT WIDTH6-7=WAIST BELT WIDTH0-2= 5 C.M1-3= 5 C.M2-4=1/2 WAIST3-5=1/2 WAIST4-6= 5 C.M5-7= 5 C.M

  • WAIST BELTLEFT BELT0-1=WAIST BELT WIDTH6-7=WAIST BELT WIDTH0-2= 5 C.M1-3= 5 C.M2-4= WAIST3-5= WAIST4-6=15 C.M FOR LONG BELT5-7=15 C.M FOR LONG BELT

Recommended

View more >