Shenzhen Lead Opto-Technology Co.,Ltd

http://www.lead-lighting.com 1 / 5

Specification of 80W LED Street LightLD-RL-80W-CL2

Add: A5 Building,Luoshan Industrial Park,Shanxia Village,Pinghu Town,LonggangDistrict,Shenzhen,ChinaTel: +86-755-84660522/89690533Fax: +86-755-84660122Websitewww.lead-lighting.com

Shenzhen Lead Opto-Technology Co.,Ltd

http://www.lead-lighting.com 2 / 5

Use high brightness COB LED as light source, low voltage constant current drive Use high heat conduction aluminum alloy as material of lamp body, High heat conducting efficiency;Reticular

radiator , attractive appearance,anti-corrosion and dustproof. With special twice integrated optical lens ,high transmittance, large beam angle, reasonable distribution,make the

road illuminance more uniform,improve the light efficiency and achieve the purpose of energy saving To meet the high heat dissipation requirements, it adopt the integrated design of the radiator and lamp, through the

flowing of the air and add the heat emission area to makes the heat send out quickly, effectively controlled theLight decay , ensure the led street lights lifespan and work reliably and efficiently.

Mainly use for roadway,street lighting.

LED type: COB integrated optical source Power :180W Dimension: 530250115 Input voltage (V): 85265V AC CRI : 80 Power efficiency: 85% Frequency: 47 63Hz Light failure:3% within 3000Hrs Lifespan: 50,000H Material: Aluminum IP gradeIP65 Insulation gradeCLASS I Humidity:5 95 R.H. Working temperature:-2055 Storage temperate:-4085

Parameter

Parameter Dimension

Shenzhen Lead Opto-Technology Co.,Ltd

http://www.lead-lighting.com 3 / 5

Model Power LED type Lumen CRI Color InputVoltageBeamAngle

LD-RL-80W-CL2 1*80W COB 7200 lm 80 W/WW AC85-256V 120

Illumination Diagram

Shenzhen Lead Opto-Technology Co.,Ltd

http://www.lead-lighting.com 4 / 5

1.Please cut off the power supply before installation.2. Removed the Pole screws of the lamp with 8MMhexagon wrenchAs picture1.3. For better waterproof and moisture proof,pls connect wire with waterproof junction box, (as picture 2)4. Insert the steel pole into the lamp body and adjust its direction. (As picture 3).5. Fasten the screws with wrench to make sure the light fixed firmly (As picture 4).

Installation Diagram

Installation Instructions

Picture 2Picture 1

Picture 4Picture 3

WaterproofJunction box Connecter

Shenzhen Lead Opto-Technology Co.,Ltd

http://www.lead-lighting.com 5 / 5

Warning Do not disassemble the Lights by yourself, or it will cause the damage of the

Light and its accessories Be carefully, do not touch the light without power off To maks sure the lifespan and lighting effect, please do not pull wires and Keep

the light from the crash and damage.

For safety secure, please only install, repair and examine by professionals person. Otherwise it maycause dangerous.

The lamps must be operated with the matchable power supply Please dont install the lights under the high temperature and damp environment,or it will cause

damage . Make sure no any covers like insulation blanket or similar materials in the surface of the Light

The effort picture of streetlamp

Notice